Edid support was added with Qemu 5. Windows guests seem to not be able
to get all possible resolutions if the default std VGA device is used as
GPU and the VM boots in BIOS mode. The result is that only one of the
following three resolutions can be configured:
800x600
1024x768
1920x1080
It is important to note that just booting a Windows VM with the edid=off
parameter will not make the large list of resolutions available. It
seems that Windows is caching the list of possible resolutions
somewhere [0].
Uninstalling the 'Microsoft Basic Display Adapter' in the device manager
and rebooting the VM is one way I found to force Windows to recreate the
list of possible resolutions.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
[0] https://lists.nongnu.org/archive/html/qemu-devel/2020-07/msg07128.html
otherwise the netdev test reads the MTU value from the test host's vmbr0
bridge, or fails if no such bridge exists.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
sometimes vendors do not put the 'rasd' namespaces in the top level
Envelope, but in every 'rasd' element this adds a test for this
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
When one of the ovf tests fails to parse at all, we just get the
'die' message of the failing component, but not which file actually
failed to parse.
To get better output, convert the parsing also to a test and ok() and
fail() respectively and then printing the error.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Requires a mock CPU-model config, which is given as a raw string to also
test parsing capabilities. Also tests defaulting behaviour.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Reviewed-By: Fabian Ebner <f.ebner@proxmox.com>
Tested-By: Fabian Ebner <f.ebner@proxmox.com>
If a cputype is custom (check via prefix), try to load options from the
custom CPU model config, and set values accordingly.
While at it, extract currently hardcoded values into seperate sub and add
reasonings.
Since the new flag resolving outputs flags in sorted order for
consistency, adapt the test cases to not break. Only the order is
changed, not which flags are present.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Reviewed-By: Fabian Ebner <f.ebner@proxmox.com>
Tested-By: Fabian Ebner <f.ebner@proxmox.com>
as preparation for refactoring it further. remote migration will add
another 1-2 parameters, and it is already unwieldly enough as it is.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
on storages where the minimum size of images is bigger than the real
OVMF_VARS.fd file, they get padded to their minimum size
when using such an image, qemu maps it fully to the vm, but the efi
does not find the vars region and creates a file on the first efi
partition it finds
this breaks some settings in the ovmf, such as resolution
to fix this, we have to specify the size for the pflash, so that
qemu only maps the first n bytes in the vm (this only works for
raw files, not for qcow2)
we also have to use the correct size when converting between storages
in 'clone_disk' (used for move disk and cloning vms) and when
live migrating to different storages
when we now expect that the source image is always correctly used/created
(e.g. raw with size=x in pflash argument) then we always create the
target correctly
when encountering users which have a non-valid image (e.g. a efidisk
moved from zfs to qcow2 before this patch), we have to tell them to
recreate the efidisk and the settings on it
we have to version_guard it to 4.1+pve2 (since we haven't bumped yet
since the change to pve2)
also add 2 tests, one for the old version and one for the new
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Stefan Reiter <s.reiter@proxmox.com>
Reviewed-by: Stefan Reiter <s.reiter@proxmox.com>
[ Thomas: rebased to master ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Some of the recent QMP changes require at least 2.8.0, but since the
oldest version we officially package for 6.x is 4.0.0 anyway, checking
for at least 3.0 should not break anyone's setup.
Note that this does not affect machine version checks, only the
installed QEMU binary version.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The previously introduced approach can fail for pinned versions when a
new QEMU release is introduced. The saner approach is to use a mapping
that gives one pve-version for each QEMU release.
Fortunately, the old system has not been bumped yet, so we can still
change it without too much effort.
QEMU versions without a mapping are assumed to be pve0, 4.1 is mapped to
pve1 since thats what we had as our default previously.
Pinned machine versions (i.e. pc-i440fx-4.1) are always assumed to be
pve0, for specific pve-versions they'd have to be pinned as well (i.e.
pc-i440fx-4.1+pve1).
The new logic also makes the pve-version dynamic, and starts VMs with
the lowest possible 'feature-level', i.e. if a feature is only available
with 4.1+pve2, but the VM isn't using it, we still start it with
4.1+pve0.
We die if we don't support a version that is requested from us. This
allows us to use the pve-version as live-migration blocks (i.e. bumping
the version and then live-migrating a VM which uses the new feature (so
is running with the bumped version) to an outdated node will present the
user with a helpful error message and fail instead of silently modifying
the config and only failing *after* the migration).
$version_guard is introduced in config_to_command to use for features
that need to check pve-version, it automatically handles selecting the
newest necessary pve-version for the VM.
Tests have to be adjusted, since all of them now resolve to pve0 instead
of pve1. EXPECT_ERROR matching is changed to use 'eq' instead of regex
to allow special characters in error messages.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
and adapt the tests
this does not impact live migration, since the order here does not
change the device layout
we want this to consistently have the readconfig first
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
bump versioned build-dependency, as qemu-server has tests checking
for errors, and we fixed an grammar error in pve-storage, so we need
the newer version to ensure our test go through
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
if the user set a device as hostpci with the 'shorthand' syntax:
hostpciX: 00:12
we ignored it on starting and showcmd and continued.
Since the user explicitly wanted to passthrough a device, we now check
if there is actually a device with that id
for explicitly configured devices (00:12.1), we did not check if it exists,
but the kvm call failed with a non-obvious error message
now we always call 'lspci' from SysFSTools to check if it actually exists,
and fail if not. With this, we can drop the workaround for adding
'0000' if no domain was given, since lspci does it already for us
this fixes#2510, an issue with using mediated devices where the users did not have
the domain in the config, since we forgot to add the default domain there
the only issue with this patch is that it changes the behaviour of
'showcmd' slightly, as in now, we die if the device was explicitly
given, but did not exists (we showed the commandline, now we fail)
this also slightly changes the commandline for qemu (adding always
the domain), which is not a problem since we cannot live migrate
or snapshot such vms, but we have to adapt the tests
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by mocking the lspci call
the mocked lspci code is basically the same as the real one,
only difference is the source of the devices and
there is no verbose flag
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
With our QEMU 4.1.1 package we can pass a additional internal version
to QEMU's machine, it will be split out there and ignored, but
returned on a QMP 'query-machines' call.
This allows us to use it for increasing the granularity with which we
can roll-out HW layout changes/additions for VMs. Until now we
required a machine version bump, happening normally every major
release of QEMU, with seldom, for us irrelevant, exceptions.
This often delays rolling out a feature, which would break
live-migration, by several months. That can now be avoided, the new
"pve-version" component of the machine can be bumped at will, and
thus we are much more flexible.
That versions orders after the ($major, $minor) version components
from an stable release - it can thus also be reset on the next
release.
The implementation extends the qemu-machine REGEX, remembers
"pve-version" when doing a "query-machines" and integrates support
into the min_version and extract_version helpers.
We start out with a version of 1.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Reviewed-by: Stefan Reiter <s.reiter@proxmox.com>
if we don't know which format the source volume/file has, let qemu-img
decide.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
...into:
* PVE::QemuServer::Helpers::min_version: check a major.minor version
string with a given major/minor version (this is equivalent to calling
the old qemu_machine_feature_enabled with only $kvmver)
* PVE::QemuServer::Machine::extract_version: get major.minor version
string from arbitrary machine type (e.g. pc-q35-4.0, ...)
* PVE::QemuServer::Machine::machine_version: helper to call
extract_version automatically before min_version
Includes a cfg2cmd test case with pinned machine version.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
QMP and monitor helpers are moved from QemuServer.pm.
By using only vm_running_locally instead of check_running, a cyclic
dependency to QemuConfig is avoided. This also means that the $nocheck
parameter serves no more purpose, and has thus been removed along with
vm_mon_cmd_nocheck.
Care has been taken to avoid errors resulting from this, and
occasionally a manual check for a VM's existance inserted on the
callsite.
Methods have been renamed to avoid redundant naming:
* vm_qmp_command -> qmp_cmd
* vm_mon_cmd -> mon_cmd
* vm_human_monitor_command -> hmp_cmd
mon_cmd is exported since it has many users. This patch also changes all
non-package users of vm_qmp_command to use the mon_cmd helper. Includes
mocking for tests.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
vm_exists_on_node in PVE::QemuConfig checks if a config file for a vmid
exists
vm_running_locally in PVE::QemuServer::Helpers checks if a VM is running
on the local machine by probing its pidfile and checking /proc/.../cmdline
check_running is left in QemuServer for compatibility, but changed to
simply call the two new helper functions.
Both methods are also correctly mocked for testing snapshots.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
with pve-qemu-4.0.1-3 or higher it was not possible in a spice remote
session to enable more displays on the fly in linux guests.
Adding the `max_outputs` parameter to the qxl device manually restores
the functionality.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
and use it also for efidisk creation and importdisk
this way we correctly handle zfs-over-iscsi options for those cases
also write tests for it
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Add tests for the qemu_img_convert parameters to the resulting
'qemu-img convert' call
we mock the 'run_command' and extract the 'cmd' parameter to
compare with what we expect
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
In general it matters where a command line options is positioned
inside a QEMU command, so we want to actually also check the order in
the cfg2cmd test
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The reason for why we did not do this in the first place was the fact
that the "usb3" flag could be set in older qemu-server versions, we
just ignored it but not filtered it out of the config..
That means there can be VMs out there which would now become a
different HW layout, and issue for migration and live-snapshot
restore.
But, actually, while the "usb3" property could be set it allowed to
start the VM in only if an additional USB devices was added to the VM
with USB2, or the VM uses "q35" based machine - as else no "ehci" was
available, and thus the "ignored" USB3 - SPICE could not get attached
anywhere -> QEMU chickened out.
And if a user had a configuration where this could started we have
still a bit luck, live-migration was not possible as the "can't
migrate VM which uses local devices:" check still hit, as in
qemu-server older than 6.0-8 we explicitly checked for "spice" when
seeing what usb device were not local, so a "spice,usb3=X" was always
(luckily) wrongly detected as local device -> migration was blocked.
So we only have one case left: restoring a live-snapshot. Here sadly
there seems no way out, it was possible to do with a "spice,usb3=1"
usb device, and thus all Snapshots taken on such VMs after they had a
clean restart on PVE 6 (to have a machine version >= 4.0) are broken
- but can be easily fixed by removing the "usb3=1" from the
problematic snapshot config.
As restoring a snapshot can be repeated more than once even on
failure without rendering the snapshot or VM permanently unusable,
this should be a reasonable compromise.
I strongly believe that the chance is so small that no one is
affected in practice and the property description mentioned that it
was not supported. If anybody is affected on snapshot restore we can
help them on a case-per-case basis.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
