Each pending options has a hash value which has the 'force'
information encoded as entry. But, this can be { force => 1 } or
{ force => 0 }, so we actually need to check the value and not just
set force to the hash directly, as else we have force always truthy..
fixes a bug where 'detach' caused disks to be destroyed immediately,
because $force parameter was always true since hash is true.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We cannot activate a path, only volume IDs with activate_volumes
(duh)
fixes commit 5c1d42b7f8
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
most of the pending changes related code has been moved into
AbstractConfig, so we have to call them as class methods from QemuConfig instead.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
brings us more in line with what we do in pve-container, also it's
good to not use file_set_contents directly if we have all those nice
wrapper interface methods to do things in a safe and guaranteed way.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
So, while we could just make this a special case before the
config_to_command call and set the $conf->{vmstate} to the statefile
for the case were it's a valid volumeid, the special case handling
get's much easier when we do this outside of that method.
So it's basically a trade-off, and after looking far to long at all
nice revisions Alwin made for me and Fabians request, and even trying
out different approaches, it was never perfect.
But having slight code duplication over the movement mess I proposed
(as I did not had the full picture then, sorry Alwin) felt like the
slightly nicer trade off, as all worked I just use this one now, it
has very clear semantics, easy to understand and that now three lines
are duplicated is IMO irrelevant.
Co-developed-by: Alwin Antreich <a.antreich@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the volume id list is only used to activate before real start and
deactivate later, so use it for the vmstate file too.
This not only makes config_to_command have less side effects, it also
ensures that the vmstate is deactivated again
Co-developed-by: Alwin Antreich <a.antreich@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and use it also for efidisk creation and importdisk
this way we correctly handle zfs-over-iscsi options for those cases
also write tests for it
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
In general it matters where a command line options is positioned
inside a QEMU command, so we want to actually also check the order in
the cfg2cmd test, to do so we need to avoid false positives like this
added.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thanks to Gilberto Nunes for finding a bug where the VM would not start
with foldersharing enabled and the qemu agent option disabled [0].
The cause was that the device org.spice-space.webdav.0 would not find a
virtio-serial-bus in this situation.
Since we always create a virtio-serial-bus for the spice vdagent it
seems sensible to use that also for the foldersharing device by moving
it in front of the other spice devices.
[0]: https://pve.proxmox.com/pipermail/pve-devel/2019-October/039441.html
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
This removes the cloudinit disk from the list of drives to clone. As the
cloudinit disk is recreated on every VM start, it's not necessary to
clone it.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
The reason for why we did not do this in the first place was the fact
that the "usb3" flag could be set in older qemu-server versions, we
just ignored it but not filtered it out of the config..
That means there can be VMs out there which would now become a
different HW layout, and issue for migration and live-snapshot
restore.
But, actually, while the "usb3" property could be set it allowed to
start the VM in only if an additional USB devices was added to the VM
with USB2, or the VM uses "q35" based machine - as else no "ehci" was
available, and thus the "ignored" USB3 - SPICE could not get attached
anywhere -> QEMU chickened out.
And if a user had a configuration where this could started we have
still a bit luck, live-migration was not possible as the "can't
migrate VM which uses local devices:" check still hit, as in
qemu-server older than 6.0-8 we explicitly checked for "spice" when
seeing what usb device were not local, so a "spice,usb3=X" was always
(luckily) wrongly detected as local device -> migration was blocked.
So we only have one case left: restoring a live-snapshot. Here sadly
there seems no way out, it was possible to do with a "spice,usb3=1"
usb device, and thus all Snapshots taken on such VMs after they had a
clean restart on PVE 6 (to have a machine version >= 4.0) are broken
- but can be easily fixed by removing the "usb3=1" from the
problematic snapshot config.
As restoring a snapshot can be repeated more than once even on
failure without rendering the snapshot or VM permanently unusable,
this should be a reasonable compromise.
I strongly believe that the chance is so small that no one is
affected in practice and the property description mentioned that it
was not supported. If anybody is affected on snapshot restore we can
help them on a case-per-case basis.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The fix introduced in commit bf4a933 did not work as intended. We're
iterating over the $oldconf, not over $virtdev_hash. This means
$drive->{is_cloudinit} is always undefined. Instead use the $exclude_cloudinit
parameter from drive_is_cdrom().
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
The check relied on the fact that in a regular use case a usb device of
type spice would not have any other settings like `usb3=1`. An exact
match worked fine for this.
This patch changes the behaviour and makes it possible to migrate VMs
with Spice USB devices that have additional usb options set.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
To not change current behaviour and thus breaking live migration USB3
for a Spice USB device requires Qemu v4.1.
The old behavior was that even though technically it was possible to
the set `usb3=1` setting, it was ignored. The bus was hardcoded to
ehci. If another USB2 device was added or the machine type was set to
Q35 an ehci controller was present and the VM was able to boot.
With this patch the behaviour is changing and the bus is set to xhci if
USB3 is set for the Spice USB device and the VM is running under Qemu
v4.1.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
this creates a reboot request file (inspired by pve-container)
and relies on the 'qm cleanup' call by the qmeventd to detect
and restart the vm afterwards
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we want to reuse most of the code in the locked context of vm_stop
for vm_reboot (since it really is just a vm_stop with a
create_reboot_request in there) so we factor that out into
_do_vm_stop
and note that it has to be called in a locked context
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the reboot trigger file was set, start the vm again
also cleanup the reboot trigger on vm startup, to prevent
leftover files to trigger a reboot at the next shutdown
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
try to increase variable declaration to use locality, reduce
duplication of same variable names used, and try to cleanup a bit in
general..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
For non pci express passthrough additional addresses are reserved.
For pcie passthrough pcie root ports are needed (unless guest is like
windows 7).
The first 4 pcie root ports are defined by default in the pve-q35*.cfg
files. If more than 4 pcie devices are passed through the needed root
ports are created on demand. This helps to keep live migration possible
without adding a new pve-q35*.cfg file.
For the windows 7 like guests additional addresses are reserved as well.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
This adds a new config option called `spice_enhancements` with two
optional settings:
* videostreaming
* foldersharing
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
we now also save the mtime of the binary and cache per binary (for each
arch; this is done so we have it already when we sometime decide
that we want to split the qemu package for each arch)
so that we get the real version if only pve-qemu-kvm was updated
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
The latest changes to our audio device implemenation [0] changed the
naming of the device id to "audio<id>" which in practice resulted in
"audio0".
This conflicts with the predefined audio device in the Q35 configs
that is also using "audio0". The result is that a VM with a
configured audio device and Q35 type will not start.
While we just would had removed the audio0 device if we had detected
this earlier in the new 4.0 q35 config, we cannot do so anymore due
to migration compatibility.
So rename the device from "audio$id" to audiodev$id".
Co-authored-by: Aaron Lauterer <a.lauterer@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Both flags were causing issues and have been made into optional flags to
be manually selected by the user if needed.
The supported flags have been merged into a single list for convenience.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
QEMU 4 adds the `-audiodev` parameter to explicitly specify the audio
backend. Setting it avoids occasional error messages when starting a
virtual machine with an audio device and qemu wants to connect it to the
physical audio device.
For now only SPICE is supported as it's also the biggest use case.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
die if we get some unknown value, which is either a bug (new dev type
added to enum but not here) or a user manual edit error, good to
ccatch both
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Until now audio devices had to be added manually with the `args` option
in the VMs config file. This adds a new config option to define an audio
device. It is called `audio0` with the extra `0` to be prepared should
we ever implement support for more than one audio device.
Supported devices are:
* ich9-intel-hda: Intel HD Audio Controller, emulates ICH9
* intel-hda: Intel HD Audio Controller, emulates ICH6
* AC97: useful for older OSs like Win XP
If any of the `intel-hda`s is selected two additional devices will be
created: hda-micro and hda-duplex. The `*intel-hda` controllers need at
least one of them as they emulate microphones and speakers (hda-micro)
or line in and out devices (hda-duplex).
Having both is deemed best practice to avoid problems if some software
needs one of the other kind of output/input ports.
I also cleaned up some old, commented out, code regarding audio devices.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
with qemu 4.0 we can make use of the new pcie-root-ports with settings
for the width/speed which can resolve issues with some hardware combinations
when negioating link speed
so we add a new q35 cfg that we include with machine types >= 4.0
to preserve live migration of machines without passthrough but q35
for details about the link speeds see:
pcie: Enhanced link speed and width support
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg02827.html
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
If 'now' is passed to the startdate option, the kvm start fails with
below failure.
kvm: invalid datetime format
valid formats: '2006-06-17T16:01:21' or '2006-06-17'
With this patch, 'now' is ignored and not passed to the rtcflags (-rtc).
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
e.g. local storage was considered not allowed for offline migration
even if it is available on all nodes, this should now be fixed as it
is now considered available on all nodes if a local storage isn't
restricted to a specific subset of the available nodes. The user is
responseable to make sure that the datacenter storage config reflects
the actual setup, so there is no additional check for local storages
which aren't available on all nodes if they are not explicitly marked
at datacenter level.
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Regression from change allowing timeouts to be set, now shutting down
also works without timeouts again (previously qmp failed because of
the unknown "timeout" parameter passed to it).
We always delete the timeout value from the arguments, regardless of
truthiness. "delete" returns the deleted element, deleting a
non-existant hash entry returns undef, which is fine after this point:
"deleting non-existent elements returns the undefined value in their
corresponding positions."
- https://perldoc.perl.org/functions/delete.html
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
