While the clamping already happens before setting the actual systemd
CPU{Shares, Weight}, it can be done here too, to avoid writing new
out-of-range values into the config.
Can't use a validator enforcing this because existing out-of-range
values should not become errors upon parsing the config.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
while making it take the value directly instead of the config.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
set aliases for the previous ones for backward compat.
There's still cleanup potential, e.g., for snapshots, but to do that
nicely we may need (or want) to extend CLIHandler to accept commands
without fixed params also on the command group itself.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Since kernel 5.15, there is an issue with io_uring when used in
combination with CIFS [0]. Unfortunately, the kernel developers did
not suggest any way to resolve the issue and didn't comment on my
proposed one. So for now, just disable io_uring when the storage is
CIFS, like is done for other storage types that had problematic
interactions.
It is rather easy to reproduce when writing large amounts of data
within the VM. I used
dd if=/dev/urandom of=file bs=1M count=1000
to reproduce it consistently, but your mileage may vary.
Some forum reports about users running into the issue [1][2][3].
[0]: https://www.spinics.net/lists/linux-cifs/msg26734.html
[1]: https://forum.proxmox.com/threads/109848/
[2]: https://forum.proxmox.com/threads/110464/
[3]: https://forum.proxmox.com/threads/111382/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
this is functionally the same, but sending SIGTERM has the ugly side
effect of printing the following to the log:
> QEMU[<pid>]: kvm: terminating on signal 15 from pid <pid> (/usr/sbin/qmeventd)
while sending a QMP quit command does not.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
currently, the 'forced_cleanup' (sending SIGKILL to the qemu process),
is intended to be triggered 5 seconds after sending the initial shutdown
signal (SIGTERM) which is sadly not enough for some setups.
Accidentally, it could be triggered earlier than 5 seconds, if a
SIGALRM triggers in the timespan directly before setting it again.
Also, this approach means that depending on when machines are shutdown
their forced cleanup may happen after 5 seconds, or any time after, if
new vms are shut off in the meantime.
Improve this situation by reworking the way we deal with this cleanup.
We save the pidfd, time incl. timeout in the Client, and set a timeout
to 'epoll_wait' of 10 seconds, which will then trigger a forced_cleanup.
Remove entries from the forced_cleanup list when that entry is killed,
or when the normal cleanup took place.
To improve the shutdown behaviour, increase the default timeout to 60
seconds, which should be enough, but add a commandline toggle where
users can set it to a different value.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the preparing of pci devices or the start of the vm fails, we need
to cleanup the pci devices (reservations *and* mdevs), or else
it might happen that there are leftovers which must be manually removed.
to include also mdevs now, refactor the cleanup code from 'vm_stop_cleanup'
into it's own function, and call that instead of only 'remove_pci_reservation'
also print the errors of the cleanup steps with 'warn', otherwise we
might discard important errors
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
allowing slower or overloaded systems a higher chance to finish
commands while not being to long to be problematic for sync api calls
with their 30s total budget
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the volume path could contain escaped ":" or ",", which means their '\'
needs to be escaped another time for passing to HMP.
the same approach is used for hotplugging regular drives in
PVE::QemuServer, and is needed (at least) for RBD storages with IPv6
monhosts or an explicit monhost port.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
This will break possibly existing workflows like
1. add second cloud-init
2. remove first cloud-init
to change the cloud-init storage.
On the other hand, it avoids unintended misconfiguration of having
mutliple cloud-init drives with potentially different settings.
Also in preparation for adding cloud-init-related API calls, where
not being able to assume that there's only one cloud-init drive/state
would complicate things quite a bit.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
So that there is a better chance to debug issues like in [0]. For
suspending, which uses the same QMP calls, this is already done.
[0]: https://forum.proxmox.com/threads/114203/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
we need to do the independent of is_custom_model to ensure the
reported model is understood by QEMU
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
the former CPU type never existed on the market and will be dropped
by QEMU 7.1, so map it to the server variant as they're pretty much
identical anyway FIWCT.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Prevent the user from suspending the vm at all, as while suspension
itself may finish, the saved state is incomplete as we can neither
save nor restore PCIe device state in any generic fashion, so
resuming will almost certainly break.
The single case when it could work is when the guest OS didn't uses
the passed through device at all, so there's no state, but that's
really odd (as why bother passing through then), and the user should
rather remove the hostpci entry in that case.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[ T: reword commit message slightly ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
like for other drive-related operations. The default of 3 seconds is
just not enough for large (or slow) disks.
Reported in the community forum:
https://forum.proxmox.com/threads/49543/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
the created backups are encrypted, but are not restorable with the
master key in case the original PVE system is lost.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
if the key file doesn't exist (anymore), but the storage.cfg references
one, die when starting a backup that should use encryption instead of
falling back to plain-text operations.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
When passing through an NVIDIA vGPU via mediated devices, their
software needs the qemu process to have the 'uuid' parameter set to the
one of the vGPU. Since it's currently not possible to pass through multiple
vGPUs to one VM (seems to be an NVIDIA driver limitation at the moment),
we don't have to take care about that.
Sadly, the place we do this, it does not show up in 'qm showcmd' as we
don't (want to) query the pci devices in that case, and then we don't
have a way of knowing if it's an NVIDIA card or not. But since this
is informational with QEMU anyway, i'd say we can ignore that.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Before, the two strings were one single string each, rather than multiple
separated by newlines.
In the docs, this looked very strange as there were linebreaks and the
dots were shown. Can be seen e.g. in api-viewer /nodes/{node}/qemu/{vmid}/config.
Signed-off-by: Matthias Heiserer <m.heiserer@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
we forgot to give the namespace parameter here, so do that.
while we're at it, give the pbs options as a hash instead of adding
another parameter.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
if the configured display hardware has the (optional) default type, but
some other attribute is set, this would match against `undef` and spew
lots of warnings in the logs.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
since this output is printed to the command line it should
be encoded to avoid the wide character warnings
Signed-off-by: Stefan Hrdlicka <s.hrdlicka@proxmox.com>
