Modern noVNC does not needs this anymore, actually things may get
worse if it's used. E.g., when one sets 'de' and the VM locale is
'de' you may get a 'ĸ' (unicode kra) if you want to send an ampersand
character through pressing SHIFT + 6.
Qemus manual pages confirms that this is most times not needed
anymore:
> -k language
> Use keyboard layout language (for example "fr" for
> French). This option is only needed where it is not
> easy to get raw PC keycodes (e.g. on Macs, with some
> X11 servers or with a VNC or curses display). You don't
> normally need to use it on PC/Linux or PC/Windows
> hosts.
-- man kvm
An user can always set it per VM, wew simply remove the implict
default derived from the cluster wide datacenter.cfg
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The git history of this is not immediately obvious due to
the date of the cloud init patches, but the removal of this
line was basically reverted by them later at merge-time.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
We introduced our QMP socket with commit
c971c4f221 (29.05.2012)
Already tried to remove this with commit
7b7c6d1b5d (13.07.2012)
But reverted that to allow migration of VMs still using the old
montior to ones which already switched over to the new QMP one,
in commit dab36e1ee9 (17.08.2012)
see bug #242 for reference
This was all done and released in PVE 2.2, as no migration through
nodes differing more than one major version is possible we can
finally remove this code for good.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Checking for the cgroup directory is a kind of time-of-check
time-of-use race condition stop-mode backups seem to
occasionally run into on some systems.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
With configdrives we end up with the /etc/network/interfaces
file containing the interface names we use on the disk, ie.
eth0/eth1/..., which doesn't work on systems which do not
use this name.
With the 'nocloud' image type we can provide a
network-config in yaml which matches mac addresses. Ideally
we'd use version 2, but debian stretch ships with a too old
cloud-init for this, so for now we're writing version 1.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
move: don't error out with "you can't move a cdrom"
clone: always full-clone cloud-init images
They get completely replaced anyway at the next start, so
there's no point in keeping them.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
*) always replace old cloudinit images
*) apply pending cloudinit changes when generating a new
image
For cloudinit we now always use vdisk_free before
vdisk_alloc in order to always replace old images, this
allows us to hotplug a new drive by setting it to
`none,media=cdrom` first (to eject the disk), then setting
it back to 'storage:cloudinit' to have a new image generated
after applying the currently pending changes.
socat tunnel for nbd mirror was introduce here
https://pve.proxmox.com/pipermail/pve-devel/2017-January/024777.html
to workaround when nbd client was hanging on non responding nbd server.
We have added a 30s timeout on socat tunnel, but when we migrate
multiple disks, it can break migration if for example first disk
is already finished and don't send any new datas in the tunnel.
The connect timeout bug has been fixed in qemu 2.9,
so we can remove the socat tunnel now.
With shared=1, (live) migration ignores the disk and assumes it is
present on all target nodes. This works similar to shared=1 on LXC
mountpoints.
Signed-off-by: Chris Hofstaedtler <chris.hofstaedtler@deduktiva.com>
Reviewed-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
if the value was '0', we did not append the option to the drive,
resulting in wrong command line if the qemu default of an option is not
'0'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Skylake-Server is the Xeon variant of Skylake
max is "all features supported by the accelerator in the current host"
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
this have the 'spec-ctrl' flag by default to allow IBRS based Spectre
mitigation by the guest kernel.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Hugepages can take some time to be allocated by qemu at start (60s for 120G of 1G hugepages).
This patch increase start timeout to 5min when hugepages are enabled.
Currently this only allows specifying '+pcid' or '-pcid'
but might be extended in the future.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Fixes: 2bfbee039b ("include format for efidisk")
Reviewed-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This also fixes a bug where VMs with no memory defined in the config
where reported as using 0MB instead of 512.
Signed-off-by: Emmanuel Kasper <e.kasper@proxmox.com>
when having an unused disk on a storage for which there are multiple
definitions, we added it again on another storage when that storage
was alphabetically before the already existing one
this happens for example when using our automatically generated
ceph storages: 'pool_ct' and 'pool_vm' and having a vm with
an unused disk
with this patch, we also leave the unused disks in the hash
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this means that we do not include the '-k' parameter anymore by default
(which is deprecated by qemu)
with this, noVNC and spice always respect the guest keyboard
configuration and altgr keys work without problems
tested:
ubuntu with english intl and german with novnc and spice
windows 10 with english intl and german with novnc and spice
live migration
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since the guest-fsfreeze-freeze command has a timeout of 1 hour,
we want to check if the guest-agent even runs before executing that,
or else we wait 1 hour and then continue
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Reviewed-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
if the efidisk is in 'raw' format, qemu will prevent writes
on block zero if the format is not explicitely given
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
'These options take an integer value and control the "cpu.shares"
control group attribute. The allowed range is 2 to 262144. Defaults to
1024.' – man 5 systemd.resource-control
we only checked if a vm had in use base disks when deleting them,
at which point we do not stop to delete the vm even when a
disk deletion fails, which means we could successfully delete the config
and all not used (base) disks of a template, resulting in left over vm disks
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
perls 'local' must be either used in front of each $SIG{...}
assignments or they must be put in a list, else it affects only the
first variable and the rest are *not* in local context.
In all cases the global signal handlers we overwrote were in cli programs or
forked workers, not in daemons.
this was only kept for PVE 4.X where the switch to the newer OVMF
image with actual working persisten EFIVARS was made.
We do not ship this old image in PVE 5.0 anymore so remove this
legacy code as it can never trigger anyhow.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
