with pve-qemu-4.0.1-3 or higher it was not possible in a spice remote
session to enable more displays on the fly in linux guests.
Adding the `max_outputs` parameter to the qxl device manually restores
the functionality.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
While we may not want to copy the cloudinit disk/drive, we still need
to create+allocate the volume, else the next start complains about a
missing CI drive..
fixes commit 7d6c99f0a0.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This adds an extra field to agent_fmt that specifes the type of guest
agent connection to use. Currently there is no choice, and defaults to
virtio-serial. Since qemu-ga also runs over isa-serial, this allows OSes
such as NetBSD and OpenBSD, which do not have support for virtio-serial,
to run a qemu-ga.
This is an optional field, which leaves the default as virtio-serial. As
it doesn't change the default, it will require no change to older
configuration files.
Signed-off-by: Matt Dunwoodie <ncon@noconroy.net>
Show storages configured for the target node and not for the current one
because they can be different.
Duplicated the `complete_storage` sub and extended it to extract the
targetnode from the parameters to pass it into the storage_check_enabled
function.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
since PVE::Cluster::get_local_migration_ip does not exist anymore. this
is basically an inlined version, since this is the only remaining caller
that we actually want to keep.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
We are in the QemuServer package not in LXC, so use the correct
package for the Config, namely QemuConfig
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the reboot request is only cleaned in the vm_start path, so if reboot
fails for some reason, the request still exists. this causes an
unintentional reboot when a shutdown/stop/hibernate is called.
to mitigate, we can just clear the reboot request in case of an error.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
This brings qemu more in line with containers, and it's nicer to
allow passing the replacement config if we want to keep it, instead
of setting a "memory: 128" config.
Use that to lock it on removal before final deletion, and on legacy
tar archive restore, in between old VM destruction and new
restoration.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
it has some potential semantic change too, i.e., the Storage
vdisk_list call is not wrapped by eval anymore, put as
we did some (unguarded) storage things before that call I'd say that
that does not matters much..
We try to clean all unused disks too, even if one deletion fails
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
When calling qmrestore a config file is created and locked with a lock
property. The following destroy_vm has been impossible as skiplock has not
been set.
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
This function has been used in one place only into which we inlined its
functionality. Removing it avoids confusion between vm_destroy and vm_destroy.
The whole $importfn is executed in a lock_config_full.
As a consequence, for the inlined code:
1. lock_config is redundant
2. it is not possible that the VM has been started (check_running) in the
meanwhile
Additionally, it is not possible that the "lock" property has been written into
the VM's config file (check_lock) in the meanwhile
Add warning after eval so that it does not go unnoticed if it ever comes into
action.
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
with qemu 4.0.1, there is now a machine type pc-q35-4.0.1 which does not fit
into our regex
this broke live migration of q35, as we give the machine type (incl version
info) to 'qm start' on the target node, which checks it against the
JSONSchema
to fix this, extend the regex to allow any number of version levels,
for q35, i440fx and virt (to be more future proof)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
As mentioned on the mailing list [0] disks owned by the VM and unused
disks should be removed before the config file is removed.
[0] https://pve.proxmox.com/pipermail/pve-devel/2019-October/039593.html
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
As mentioned in #2408, live-migrating a VM between storages that use
different scsi backends (scsi-hd, scsi-generic, scsi-block) breaks.
To fix, from QEMU 4.1 machine types onward (to not break current
behaviour any more), only use scsi-hd, as in recent versions, there is
almost no difference between the two anyway.
scsi-block (which potentially also breaks) requires a flag to be
manually set on the disk, so we can assume the user knows what they're
doing.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Suggested-by: Daniel Berteaud <daniel@firewall-services.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Each pending options has a hash value which has the 'force'
information encoded as entry. But, this can be { force => 1 } or
{ force => 0 }, so we actually need to check the value and not just
set force to the hash directly, as else we have force always truthy..
fixes a bug where 'detach' caused disks to be destroyed immediately,
because $force parameter was always true since hash is true.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We cannot activate a path, only volume IDs with activate_volumes
(duh)
fixes commit 5c1d42b7f8
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
most of the pending changes related code has been moved into
AbstractConfig, so we have to call them as class methods from QemuConfig instead.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
brings us more in line with what we do in pve-container, also it's
good to not use file_set_contents directly if we have all those nice
wrapper interface methods to do things in a safe and guaranteed way.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
So, while we could just make this a special case before the
config_to_command call and set the $conf->{vmstate} to the statefile
for the case were it's a valid volumeid, the special case handling
get's much easier when we do this outside of that method.
So it's basically a trade-off, and after looking far to long at all
nice revisions Alwin made for me and Fabians request, and even trying
out different approaches, it was never perfect.
But having slight code duplication over the movement mess I proposed
(as I did not had the full picture then, sorry Alwin) felt like the
slightly nicer trade off, as all worked I just use this one now, it
has very clear semantics, easy to understand and that now three lines
are duplicated is IMO irrelevant.
Co-developed-by: Alwin Antreich <a.antreich@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the volume id list is only used to activate before real start and
deactivate later, so use it for the vmstate file too.
This not only makes config_to_command have less side effects, it also
ensures that the vmstate is deactivated again
Co-developed-by: Alwin Antreich <a.antreich@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and use it also for efidisk creation and importdisk
this way we correctly handle zfs-over-iscsi options for those cases
also write tests for it
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
In general it matters where a command line options is positioned
inside a QEMU command, so we want to actually also check the order in
the cfg2cmd test, to do so we need to avoid false positives like this
added.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thanks to Gilberto Nunes for finding a bug where the VM would not start
with foldersharing enabled and the qemu agent option disabled [0].
The cause was that the device org.spice-space.webdav.0 would not find a
virtio-serial-bus in this situation.
Since we always create a virtio-serial-bus for the spice vdagent it
seems sensible to use that also for the foldersharing device by moving
it in front of the other spice devices.
[0]: https://pve.proxmox.com/pipermail/pve-devel/2019-October/039441.html
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
This removes the cloudinit disk from the list of drives to clone. As the
cloudinit disk is recreated on every VM start, it's not necessary to
clone it.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
