same as with the extended support for more usb devices, allow
hotplugging for guests that can use the qemu-xhci controller which
require a machine type >= 7.1 and a ostype l26 or windows > 7
if no usb device was passed through on startup, dynamically add
the xhci controller (and remove if the last usb device is unplugged)
so that live migration is still possible
much of the usb hotplug code was already there, but it still needed
a few adaptions, for example we have to add a chardev when adding
a spice redir port (that gets automatically removed when the
usb-redir device gets removed)
since the spice devices use the id 'usbredirdevX' instead of 'usbX', we
have to manually map that a bit around
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
for machine versions >= 7.1 and ostype linux or windows > 7, we use the
qemu-xhci controller where we have up to 14 usable ports, so make them
available to the user
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
going by reports in the forum (e.g. [0]) and semi-official qemu
information[1], we should prefer qemu-xhci over nec-usb-xhci
for compatibility purposes, we guard that behind the machine version,
so that guests with a fixed version don't suddenly have a different usb
controller after a reboot (which could potentially break some hardcoded
guest configs)
0: https://forum.proxmox.com/threads/proxmox-usb-connect-disconnect-loop.117063/
1: https://www.kraxel.org/blog/2018/08/qemu-usb-tips/
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
should not happen normally, but an inattentive user of that function
may forget to check the validity of the parsed device, so err
on the safe side here
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
just outside of context, we already save the result from
machine_type_is_q35 into the $q35 variable, but never use it.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Reuse the PVE::CpuSet to validate cpuset formatting.
Add new qemu property called 'affinity' to store the cpuset.
Push taskset command in front of kvm if 'affinity' is set.
Signed-off-by: Daniel Bowder <daniel@bowdernet.com>
mdevs have a host-unique UUID they are indexed with in the PCI-id
independent `/sys/bus/mdev/devices/<uuid>` path, so there is no need
to go through the PCI id for them.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the preparing of PCI devices or the start of the VM fails, we need
to cleanup the PCI devices (reservations *and* mdevs), or else it
might happen that there are leftovers which must be manually removed.
to include also mdevs now, refactor the cleanup code from
'vm_stop_cleanup' into it's own function, and call that instead of
only 'remove_pci_reservation'
also simplifies the code, such that it now removes all PCI ids
reserved for that VMID, since we cannot have multiple VMs with the
same VMID anyway
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Previously, only a plaintext line in the task log showed something was off.
Now, the GUI will show it as a warning.
Reviewed-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Matthias Heiserer <m.heiserer@proxmox.com>
This allow to regenerate config drive if pending values exist
when we change vm options.
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
This allow to regenerate the config drive with 1 api call.
This also avoid to delete drive first, and recreate it again.
As it's a readonly drive, we can simply live update it,
and eject/replace it with qemu monitor
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Instead using vm pending options for pending cloudinit generated config,
write current generated cloudinit config in a new [special:cloudinit] SECTION.
Currently, some options like vm name, nic mac address can be hotplugged,
so they are not way to know if the cloud-init disk is already updated.
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
While the clamping already happens before setting the actual systemd
CPU{Shares, Weight}, it can be done here too, to avoid writing new
out-of-range values into the config.
Can't use a validator enforcing this because existing out-of-range
values should not become errors upon parsing the config.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
while making it take the value directly instead of the config.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
set aliases for the previous ones for backward compat.
There's still cleanup potential, e.g., for snapshots, but to do that
nicely we may need (or want) to extend CLIHandler to accept commands
without fixed params also on the command group itself.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Since kernel 5.15, there is an issue with io_uring when used in
combination with CIFS [0]. Unfortunately, the kernel developers did
not suggest any way to resolve the issue and didn't comment on my
proposed one. So for now, just disable io_uring when the storage is
CIFS, like is done for other storage types that had problematic
interactions.
It is rather easy to reproduce when writing large amounts of data
within the VM. I used
dd if=/dev/urandom of=file bs=1M count=1000
to reproduce it consistently, but your mileage may vary.
Some forum reports about users running into the issue [1][2][3].
[0]: https://www.spinics.net/lists/linux-cifs/msg26734.html
[1]: https://forum.proxmox.com/threads/109848/
[2]: https://forum.proxmox.com/threads/110464/
[3]: https://forum.proxmox.com/threads/111382/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
if the preparing of pci devices or the start of the vm fails, we need
to cleanup the pci devices (reservations *and* mdevs), or else
it might happen that there are leftovers which must be manually removed.
to include also mdevs now, refactor the cleanup code from 'vm_stop_cleanup'
into it's own function, and call that instead of only 'remove_pci_reservation'
also print the errors of the cleanup steps with 'warn', otherwise we
might discard important errors
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
allowing slower or overloaded systems a higher chance to finish
commands while not being to long to be problematic for sync api calls
with their 30s total budget
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the volume path could contain escaped ":" or ",", which means their '\'
needs to be escaped another time for passing to HMP.
the same approach is used for hotplugging regular drives in
PVE::QemuServer, and is needed (at least) for RBD storages with IPv6
monhosts or an explicit monhost port.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
This will break possibly existing workflows like
1. add second cloud-init
2. remove first cloud-init
to change the cloud-init storage.
On the other hand, it avoids unintended misconfiguration of having
mutliple cloud-init drives with potentially different settings.
Also in preparation for adding cloud-init-related API calls, where
not being able to assume that there's only one cloud-init drive/state
would complicate things quite a bit.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
So that there is a better chance to debug issues like in [0]. For
suspending, which uses the same QMP calls, this is already done.
[0]: https://forum.proxmox.com/threads/114203/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
we need to do the independent of is_custom_model to ensure the
reported model is understood by QEMU
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
the former CPU type never existed on the market and will be dropped
by QEMU 7.1, so map it to the server variant as they're pretty much
identical anyway FIWCT.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Prevent the user from suspending the vm at all, as while suspension
itself may finish, the saved state is incomplete as we can neither
save nor restore PCIe device state in any generic fashion, so
resuming will almost certainly break.
The single case when it could work is when the guest OS didn't uses
the passed through device at all, so there's no state, but that's
really odd (as why bother passing through then), and the user should
rather remove the hostpci entry in that case.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[ T: reword commit message slightly ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
like for other drive-related operations. The default of 3 seconds is
just not enough for large (or slow) disks.
Reported in the community forum:
https://forum.proxmox.com/threads/49543/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
the created backups are encrypted, but are not restorable with the
master key in case the original PVE system is lost.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
if the key file doesn't exist (anymore), but the storage.cfg references
one, die when starting a backup that should use encryption instead of
falling back to plain-text operations.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
When passing through an NVIDIA vGPU via mediated devices, their
software needs the qemu process to have the 'uuid' parameter set to the
one of the vGPU. Since it's currently not possible to pass through multiple
vGPUs to one VM (seems to be an NVIDIA driver limitation at the moment),
we don't have to take care about that.
Sadly, the place we do this, it does not show up in 'qm showcmd' as we
don't (want to) query the pci devices in that case, and then we don't
have a way of knowing if it's an NVIDIA card or not. But since this
is informational with QEMU anyway, i'd say we can ignore that.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Before, the two strings were one single string each, rather than multiple
separated by newlines.
In the docs, this looked very strange as there were linebreaks and the
dots were shown. Can be seen e.g. in api-viewer /nodes/{node}/qemu/{vmid}/config.
Signed-off-by: Matthias Heiserer <m.heiserer@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
we forgot to give the namespace parameter here, so do that.
while we're at it, give the pbs options as a hash instead of adding
another parameter.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
if the configured display hardware has the (optional) default type, but
some other attribute is set, this would match against `undef` and spew
lots of warnings in the logs.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
since this output is printed to the command line it should
be encoded to avoid the wide character warnings
Signed-off-by: Stefan Hrdlicka <s.hrdlicka@proxmox.com>
and exit early if they are not met.
The necessary libraries were taken from Thomas' post in our community
forum:
https://forum.proxmox.com/threads/.61801/post-466767 (ff)
The /dev/dri/renderD.* check is based on util/drm.c in the current
qemu source code.
Suggested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Generalizes fd95d780 ("migrate: send updated TPM state volid to target
node") to also handle other offline migrated disks appearing in the
VM config, which currently should only be cloud-init.
Breaks migration new -> old under similar (edge-case-)conditions as
fd95d780 did.
Keep sending the 'tpmstate0' STDIN parameter to avoid breaking new ->
old in the scenario fd95d780 fixed.
Keep parsing the vm_start 'tpmstate0' STDIN parameter to avoid
breaking old -> new, and to be able to keep sending it.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
In preparation to allow passing along certain parameters together with
'archive'. Moving the parameter checks to after the
conflicts-with-'archive' to ensure that the more telling error will
trigger first.
All check helpers should handle empty params fine, but check first
just to make sure and to avoid all the superfluous function calls.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
To be consistent with PBS's implementation of multi-line comments
remove "\s*" here too. Since the regex isn't lazy .* matches
everything \s* would anyway. (Note that new lines occurs after "$").
Signed-off-by: Stefan Sterz <s.sterz@proxmox.com>
When phase2() is aborted after the migration already converged, then
after migrate_cancel, the VM might be in POSTMIGRATE state.
(There also is a conditional for SHUTDOWN state in QEMU's
migration_iteration_finish(), so it's likely possible to end up there
if the VM is shut down at the right time during migration, but no need
to resume then).
Detect the POSTMIGRATE state and resume the VM if it wasn't paused at
the beginning of the migration. There is no direct way to go to
PAUSED, so just print an error if the VM was paused at the beginning
of the migration.
Reported-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
by re-using the same hash that's used when allocating/activating the
disks in the helpers doing the opposite.
Also in preparation to allow skipping certain disks upon restore.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Also cannot issue a guest agent command in that case.
Reported in the community forum:
https://forum.proxmox.com/threads/106618
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
It's only available since QEMU 6.2 and doing a check here rather than
bumping the package dependency allows for easy downgrades.
Suggested-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
In the spirit of c75bf16 ("qm importdisk: tell user to what VM disk we
actually imported"), and so that the information is not lost once qm
importdisk switches to re-using the API call.
Added for cloudinit too, because a new disk is allocated.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
via the special syntax <storeid>:<size>.
Not worth it by itself, but this is anticipating a new 'import-from'
parameter which is only used upon import/allocation, but shouldn't be
part of the schema for the config or other API enpoints.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Co-developed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
[split into its own patch + minor improvements/style fixes]
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
[renamed API handler, since it's not an index]
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Drive keys are sorted when cloning and 'tpmstate0' comes late, so it
was likely that potentially large disks were already copied just to be
removed again, because of the TPM state restriction at the end.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
because when the VM ID of target and source are the same,
qemu_drive_mirror_monitor() switches the QEMU device node over to the
new backing image. The planned import-from functionality makes it
possible to run into this, although for an a bit unusual use case.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
