since this output is printed to the command line it should
be encoded to avoid the wide character warnings
Signed-off-by: Stefan Hrdlicka <s.hrdlicka@proxmox.com>
The goal of this is to expand the move-disk API endpoint to make it
possible to move a disk to another VM. Previously this was only possible
with manual intervertion either by renaming the VM disk or by manually
adding the disks volid to the config of the other VM.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
The QMP 'change' command is no longer available since QEMU 6.0, so this
cannot work - instead of replacing it, we can just remove it however.
The 'if' branch would only set the VNC socket path anew and enable
password mode, which is always set and enabled on startup already.
The 'else' branch was intended for certificate login (?), which
according to the FIXME comment is long gone anyway - simply forbid
'vncproxy' without the PVE ticket environment variable set.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
While the do_import method cleans up the current disk it was
importing on any error the following cases are not handled:
* multiple disks, first few succeed then one fails, only the last
failed one was taken care of before this patch
* error after the import disk loop was not handled
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Extends print_recursive_hash for the CLI to handle JSON booleans so the
result will actually show up in 'qm status --verbose'.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
(also fixes#3011)
Deprecates the old-style 'boot' and 'bootdisk' options by adding a new
'order=' subproperty to 'boot'.
This allows a user to specify more than one disk in the boot order,
helping with newer versions of SeaBIOS/OVMF where disks without a
bootindex won't be initialized at all (breaks soft-raid and some LVM
setups).
This also allows specifying a bootindex for USB and hostpci devices,
which was not possible before. Floppy boot support is not supported in
the new model, but I doubt that will be a problem (AFAICT we can't even
attach floppy disks to a VM?).
Default behaviour is intended to stay the same, i.e. while new VMs will
receive the new 'order' property, it will be set so the VM starts the
same as before (using get_default_bootorder).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
as the nbd server could have been stopped by something else.
Further, it makes no sense to die and mark the migration thus as
failed, just because of a NBD server stop issue.
At this point the migration hand off to the target was done already,
so normally we're good, if it fails we have other (followup) problems
anyway.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The initialization for the drive keys in $confdesc is changed
to be a single for-loop iterating over the keys of $drivedesc_hash and
the initialization of the unusedN keys is move to directly below it.
To avoid the need to change all the call sites, functions with more than
a few callers are exported from the submodule and imported into QemuServer.pm.
For callers of the now imported functions within QemuServer.pm, the prefix
PVE::QemuServer is dropped, because it is unnecessary and now even confusing.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
The http-server has a 64KB payload limit for post requests, so note
that explicit even if it's a theoretical maximum as the reamainig
params also need some space in the request
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
'input-data' can be used to pass arbitrary data to a guest when running
an agent command with 'guest-exec'. Most guest-agent implementations
treat this as STDIN to the command given by "path"/"arg", but some go as
far as relying solely on this parameter, and even fail if "path" or
"arg" are set (e.g. Mikrotik Cloud Hosted Router) - thus "command" needs
to be made optional.
Via the API, an arbitrary string can be passed, on the command line ('qm
guest exec'), an additional '--pass-stdin' flag allows to forward STDIN
of the qm process to 'input-data', with a size limitation of 1 MiB to
not overwhelm QMP.
Without 'input-data' (API) or '--pass-stdin' (CLI) behaviour is unchanged.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
QMP and monitor helpers are moved from QemuServer.pm.
By using only vm_running_locally instead of check_running, a cyclic
dependency to QemuConfig is avoided. This also means that the $nocheck
parameter serves no more purpose, and has thus been removed along with
vm_mon_cmd_nocheck.
Care has been taken to avoid errors resulting from this, and
occasionally a manual check for a VM's existance inserted on the
callsite.
Methods have been renamed to avoid redundant naming:
* vm_qmp_command -> qmp_cmd
* vm_mon_cmd -> mon_cmd
* vm_human_monitor_command -> hmp_cmd
mon_cmd is exported since it has many users. This patch also changes all
non-package users of vm_qmp_command to use the mon_cmd helper. Includes
mocking for tests.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Also remove unused $confdir variable in QemuConfig, but leave it and
$lock_dir there, since those paths should only be used with
cfs_config_path anyway.
nodename() is still called in multiple places, but since it's cached by
INotify it doesn't really matter.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This brings qemu more in line with containers, and it's nicer to
allow passing the replacement config if we want to keep it, instead
of setting a "memory: 128" config.
Use that to lock it on removal before final deletion, and on legacy
tar archive restore, in between old VM destruction and new
restoration.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
as else one has no idea what the imported disk is, especially if
multiple unused disks are already present..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
mixed with indentation changes a whole lot of other changes which
should normally not mixed to much together, but this is all a bit
tangled and I'm not sure if splitting it into two or three parts
would help anybody.. just use "-w" (ignore whitespace changes) when
looking at the diff..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Previously a VMID conflict was possible when creating a VM on another node
between locking the config with lock_config_full and writing to it for the
first time with write_config.
Using create_and_lock_config eliminates this possibility. This means that now
the "lock" property is set in the config instead of using flock only.
$param was empty when it was assigned the three values "name", "memory" and
"cores" before being assigned to $conf later on. Assigning those values
directly to $conf avoids confusion about what the two variables contain.
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
Functions like qm importovf can now set the "lock" property in a config file
before calling do_import.
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
This function has been used in one place only into which we inlined its
functionality. Removing it avoids confusion between vm_destroy and vm_destroy.
The whole $importfn is executed in a lock_config_full.
As a consequence, for the inlined code:
1. lock_config is redundant
2. it is not possible that the VM has been started (check_running) in the
meanwhile
Additionally, it is not possible that the "lock" property has been written into
the VM's config file (check_lock) in the meanwhile
Add warning after eval so that it does not go unnoticed if it ever comes into
action.
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
this creates a reboot request file (inspired by pve-container)
and relies on the 'qm cleanup' call by the qmeventd to detect
and restart the vm afterwards
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the reboot trigger file was set, start the vm again
also cleanup the reboot trigger on vm startup, to prevent
leftover files to trigger a reboot at the next shutdown
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Adds the command 'qm cloudinit dump <vmid> <type>' where type is either
'user', 'network' or 'meta' as specified in the API.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
This commit addresses the following things:
* There can be multiple independent snapshot tree roots, display them
all
* If a snapshot defines a parent that doesn't exist, it is now
considered a snapshot root
There is a potential issue (which was also before and also affects the
GUI): circular snapshot trees. That plays into the second mentioned
issue above. If you manage to have a snapshot that defines a
non-existing root in the config, and then create a snapshot with that
exact name as a child of that snapshot, it would create a circular
dependency. This would have to get addressed in the GUI too.
Signed-off-by: Rhonda D'Vine <rhonda@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
remove now out of date commen about 'our', left over from previous
revision
Pass firs $prefix directly to function and some other small stuff
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The look of the tree is based on the GUI variant, so that we have a
consistent output when run multiple times, too.
Signed-off-by: Rhonda D'Vine <rhonda@proxmox.com>
this adds a new config option for it, and executes it on four
points in time:
'pre-start'
'post-start'
'pre-stop'
'post-stop'
on pre-start we abort if the script fails
and pre-stop will not be called if the vm crashes or if
the vm gets powered off from inside the guest
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
The qm CLI command offer the config and showcmd functions. Both of those
outputs may vary with respect to a given snapshot. This adds a switch
that shows the corresponding snapshot's config and command line.
The code needs a newer libpve-guest-common-perl, thus bumping the
dependency.
Signed-off-by: Rhonda D'Vine <rhonda@proxmox.com>
if we migrate a vm we call cleanup but the logging looks like:
Starting cleanup for 101
trying to acquire lock...
OK
Configuration file 'nodes/pve-ceph-01/qemu-server/101.conf' does not exist
with this patch, we omit any logging in the case we do not have the config,
since we cannot know what to clean up
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this is intended to be used with qmeventd, to do
the necessary cleanups when qemu crashes or is being
shut down from within the guest
this can also be the point where we could introduce
shutdown/stop/reboot hooks
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
on the commandline the implementation for exec is a bit different
because there we want (by default) to wait for the result,
as opposed to the api, where it is enough to return the pid and
let the client handle the polling
this behaviour is optional and can be turned off, as well as the
timeout of 30 seconds
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
tells an user what would get touched, so he has a chance to fix
unwanted things before changes are actually made.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
