die if we get some unknown value, which is either a bug (new dev type
added to enum but not here) or a user manual edit error, good to
ccatch both
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Until now audio devices had to be added manually with the `args` option
in the VMs config file. This adds a new config option to define an audio
device. It is called `audio0` with the extra `0` to be prepared should
we ever implement support for more than one audio device.
Supported devices are:
* ich9-intel-hda: Intel HD Audio Controller, emulates ICH9
* intel-hda: Intel HD Audio Controller, emulates ICH6
* AC97: useful for older OSs like Win XP
If any of the `intel-hda`s is selected two additional devices will be
created: hda-micro and hda-duplex. The `*intel-hda` controllers need at
least one of them as they emulate microphones and speakers (hda-micro)
or line in and out devices (hda-duplex).
Having both is deemed best practice to avoid problems if some software
needs one of the other kind of output/input ports.
I also cleaned up some old, commented out, code regarding audio devices.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
with qemu 4.0 we can make use of the new pcie-root-ports with settings
for the width/speed which can resolve issues with some hardware combinations
when negioating link speed
so we add a new q35 cfg that we include with machine types >= 4.0
to preserve live migration of machines without passthrough but q35
for details about the link speeds see:
pcie: Enhanced link speed and width support
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg02827.html
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
If 'now' is passed to the startdate option, the kvm start fails with
below failure.
kvm: invalid datetime format
valid formats: '2006-06-17T16:01:21' or '2006-06-17'
With this patch, 'now' is ignored and not passed to the rtcflags (-rtc).
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
e.g. local storage was considered not allowed for offline migration
even if it is available on all nodes, this should now be fixed as it
is now considered available on all nodes if a local storage isn't
restricted to a specific subset of the available nodes. The user is
responseable to make sure that the datacenter storage config reflects
the actual setup, so there is no additional check for local storages
which aren't available on all nodes if they are not explicitly marked
at datacenter level.
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Regression from change allowing timeouts to be set, now shutting down
also works without timeouts again (previously qmp failed because of
the unknown "timeout" parameter passed to it).
We always delete the timeout value from the arguments, regardless of
truthiness. "delete" returns the deleted element, deleting a
non-existant hash entry returns undef, which is fine after this point:
"deleting non-existent elements returns the undefined value in their
corresponding positions."
- https://perldoc.perl.org/functions/delete.html
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
while it really should not pose an issue for live migrations lets be
on the safe side and also add this only with 3.1 or later machines
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Kernels 4.18+ (4.17+ for evmcs) support new Hyper-V enlightenments for
Windows KVM guests. QEMU supports these since 3.0 and 3.1 respectively.
tlbflush and ipi improve performance on overcommitted systems, evmcs
improves nested virtualization.
It's not entirely clear to me if Win7 already supports these, but since
it doesn't cause any performance penalties (and it works fine without
crashing, which makes sense either way, because Hyper-V enlightenments
are opt-in by the guest OS), enabling it regardless should be fine.
(As opposed to adding a new if branch for win8+)
Feature explanations to the best of my understanding:
hv_tlbflush allows the guest OS to trigger tlb shootdowns via a
hypercall. This allows CPUs to be identified via their vpindex (which
makes hv_vpindex a prerequisite to hv_tlbflush, but that is already
handled in our code). In overcommited configurations, where multiple
vCPUs reside on one pCPU, this increases performance of guest tlb
flushes, by only flushing each pCPU once. It also allows multiple tlb
flushes with only one vmexit.
hv_ipi allows sending inter-processor interrupts via vpindex, once again
making it a prerequisite. Benefits are pretty much as with tlbflush.
hv_evmcs is a VM control structure in L1 guest memory, allowing an L1 guest
to modify L2 VMCS and entering L2 without having the L0 host perform an
expensive VMCS update on trapping the nested vmenter.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The "guest-shutdown" guest agent call is blocking for some reason, so if
it fails (e.g. agent not installed on guest) only the default timeout of
10 minutes (see QMPClient.pm, sub cmd) would apply.
With this change, if (and only if) a timeout is specified via CLI/API,
it is used instead. In case it is not specified, behaviour stays the
same (default 10 min timeout).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This should help with the rare case where stop mode backups
fail to restart due to the $vmid.scope not being completely
gone when we want to restart. This queries systemd via dbus,
and if the scope is still there, awaits a UnitRemoved signal
for the scope from dbus.
For now with a 5 second timeout... (given that the processes
are already gone and it's really just waiting for systemd to
wake up, this should be plenty...)
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
to acutally allow to set the values requested by #2190 we need to
alter the limit a bit, as else the requested values cannot be save.
Just double it to 512, which should be really enough for this, else
go complain to your software vendor for needing such _hacks_ in the
first place..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
On some occasions e.g. license checking, the manufacturer string in the
SMBIOS settings edit has to allow characters such as whitespaces.
https://forum.proxmox.com/threads/proxmox-and-windows-rok-license-for-dell.53236/
In principle SMBIOS allows to pass any zero terminated string to the
corresponding fields in the structure type 1 (System Information).
By base64 encoding the values clashing of the config is avoided.
Relies on the corresponding patch to pve-manager to obtain base64 encoded values.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
for both vm_mon_cmd calls. under certain circumstances, the following
sequence of events can otherwise fail when live-migrating under load:
S...source node
T...target node
0: migration is complete, handover from S to T starts
1: S: logically move VM config file from S to T via rename()
2: S: rename returns, config file is (visibly) moved on S
3: S: trigger resume on T via mtunnel
4a: T: call vm_resume while config file move is not yet visible on T
4b: T: call vm_resume while config file move is already visible on T
4a instead of 4b means vm_mon_cmd will die in check_running unless
vm_mon_cmd_nocheck is used.
under heavy pmxcfs load and a slow cluster/corosync network, there can
be a few seconds of delay between 1 and 2, with a subsequent race ending in 4a
instead of 4b.
this issue was reported to occur on bulk migrations.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
cloudinit is just completely broken...
Until we rewrite this to a sane designe (i.e., never backup, mirror,
... any CI disk anywhere - the state is in the config and gets
created on start and deleted on stop anyway) do this..
Co-developed-by: Mira Limbek <m.limbek@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Resolves the issue of restoring a VM that has a cloudinit drive
configured to a new VMID. The VMID of the disk name gets now remapped
correctly and in the process the cloudinit disk is created with the same size
as in PVE/API2/Qemu.pm create_disks and in PVE/QemuServer/Cloudinit
commit_cloudinit_disk as the same constant is used.
This is done by matching any line starting with either 'ide', 'sata' or
'scsi' and then check if it is a cloudinit drive. As cloudinit drives
are attached as cdrom, only those 3 are possible. For the cloudinit
check we use 'parse_drive' followed by 'drive_is_cloudinit' so no custom
regex is necessary.
'--targetstorage' is also taken into account on restore now for
cloudinit disks. If a target storage is specified the format is either
kept if possible, or changed to the default of that storage.
This should fix#1807 completely. The restore error was already resolved
with commit 7e8ab2a, but the vmid of the disk might not have matched the new
one.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
with commit 64d1a6a it's now possible to specify a format other than raw
or qcow2 when creating VMs. This can lead to an error when cloning the
VMs and a cloudinit disk with a different format is attached (e.g.
vmdk).
We use QEMU_FORMAT_RE in drive_is_cloudinit and according to the
QEMU_FORMAT_RE we support 7 different formats.
With this change we add any format other than 'raw' as '.<format>' to the
name and no longer die on any other format. Cloudinit disks with invalid
format are not cloned as the drive is recognized as cdrom, not cloudinit.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
The restore of a backup from a VM template will first restore the VM and then
convert the restored VM back into a template.
This automatically performes the steps of the current behaviour, where the user
has to manually convert the restored VM back to a template.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
used for online local disks via qemu_drive_mirror
Add TODO comment for offline disks, as clone_disk calls `qemu-img
convert`, which does not have a bandwidth limit parameter.
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
this makes it possible to give a storage for state saving, if one
wants to use a different storage than for snapshots or does not
want to save this info into the config
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if a vm has the 'suspended' lock, we resume with the saved state
and remove the lock, the saved vmstate and the saved runningmachine
after the vm started
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the idea is to have the same logic as with snapshots, but without
the snapshotting of the disks, and after saving the vm state (incl memory),
we hard shut off the guest.
this way the disks will not be touched anymore by the guest
to prevent any alteration of the vm (incl migration, hw changes, etc) we
add a config lock 'suspend'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we map scsiX to virtioscsiX/scsihwX when we use virtio-scsi-single to add
and iothread so we have to map it back when we delete an iothread, else the
parsing fails with
'invalid drive key: virtioscsi0'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
qemu-img uses the qemu default initiator name 'iqn.2008-11.org.linux-kvm'
since we use the one of the host (/etc/iscsi/initiatorname.iscsi) when
using it with a running vm, we want to using it also when moving a disk
with qemu-img
to do that we have give qemu-img the image in as a full option string
this fixes the issue that we could not move an zfs-over-iscsi disk
without allowing the default qemu initiator
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Adds the 'cicustom' option to specify either or both network and user
options as property strings. Their parameters are files in a snippets
storage (e.g. local:snippets/network.yaml). If one or both are specified
they are used instead of their respective generated configuration.
This allows the use of completely custom configurations and is also a
possible solution for bug #2068 by specifying a custom user file that
contains package_upgrade: false.
Tested with Ubuntu 18.10 and cloud-init 18.4.7
Signed-off-by: David Limbeck <d.limbeck@proxmox.com>
we also need to set the link status if the whole device changed,
otherwise a change of macaddress allows a network connection even
if link_down is set to 1
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
with such a shared memory device, a vm can share data with other
vms or with the host via memory
one of the use cases is looking-glass[1] with pci-passthrough, which copies
the guest fb to the host and you get a high-speed, low-latency
display client for the vm
on vm stop we delete the file again
1: https://looking-glass.hostfission.com/
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
This allows to set the wwn parameter for ide, sata and scsi disks in the VM
config and passes it to the qemu command on execution.
VirtIO Block does not supports this property, so exclude it from
there.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
commit 3c23aa808c tried to fix a issue
where after a stop mode backup a scope could still linger around, but
it actually removed the wrong check. If we want to remove a
lingering, not yet cleaned up, scope we need to check if said scope
exists not if a VM process is still running. While they are corelated
the scope will always get cleaned up _after_ it's processes are gone.
Should fix#2043, but as this is seemingly not that easy to fix one
for all I'll put the should as disclaimer here.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
this adds a new config option for it, and executes it on four
points in time:
'pre-start'
'post-start'
'pre-stop'
'post-stop'
on pre-start we abort if the script fails
and pre-stop will not be called if the vm crashes or if
the vm gets powered off from inside the guest
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
The qm CLI command offer the config and showcmd functions. Both of those
outputs may vary with respect to a given snapshot. This adds a switch
that shows the corresponding snapshot's config and command line.
The code needs a newer libpve-guest-common-perl, thus bumping the
dependency.
Signed-off-by: Rhonda D'Vine <rhonda@proxmox.com>
this patch allows the user to explicitely set a virtual vga,
even when using the 'x-vga' flag, this is sometimes necessary,
as some users need the 'x-vga' flag on the pci device,
but still want to use a virtual vga
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
with this, a user can set the hv_vendor_id independently of
any 'x-vga=on' setting he may or may not have configured.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Win7 is very picky about pcie assignments and fails with
'error 12' the way we add hospci devices.
To combat that, we simply give the hostpci device a normal port
instead.
Start with address 0x10, so that we have space before those devices,
and between them and the ones configured in pve-q35.cfg should we
need it in the future.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
When not setting 'vga' we would get a warning:
Use of uninitialized value $type in string eq at
/usr/share/perl5/PVE/QemuServer.pm line 2026.
This patch changes the order of the conditions and checks if $type is set
before using it, so that we do not get the warning anymore.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
so that one can explicitly disable the vga without having to specify
a serial port as display, this is mostly useful for very special
and custom gpu passthrough setups which have to be specified with
'args' and for setups which do not care about any display (not even serial)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
there is nothing that should be really affected by this, but
even then, this option is only for experts and people using this
should know what they are doing
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since lspci does not split between id and function anymore,
there is no need to plug id + function together
also we can remove the capture groups from PCIRE
since parse_property_string does this check for us
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
with this, we are able to create and use mediated devices,
which include Intel GVT-g (aka KVMGT) and Nvidia vGPUs, and probably more
types of devices in the future
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we reverse the direction of the event socket (this does not
prevent live migration) and point it to wher qmeventd listens
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
On arm we start off with a pcie bridge pcie.0. We need a
keyboard in addition to the tablet device, and we need to
connect both to an 'ehci' controller.
To do all this, we also pass the $arch variable through a
whole lot of function calls to ultimately also adapt the
hotplug code to take care of the new keyboard device.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
This was never actually used, but we want to use it as
alternative to checking /proc/cpuinfo for 'hvm' on ARM.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
with commit 55655ebc32
we changed $vga to a parsed hash instead of a string
and forgot to check the property type in one place
this fixes an issue where a vm with a gpu passed through
with x-vga=on could not start
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we change 'vga' to a property string and add a 'memory' property
with this, the user can better control the memory given to the virtual
gpu, this is especially useful for spice/qxl since high resolutions need
more memory
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
When enabled, the `ssd` property exposes drives as SSDs (rather than
rotational hard disks) by setting QEMU's `rotation_rate` property [1,
2] on `ide-hd`, `scsi-block`, and `scsi-hd` devices. This is required
to enable support for TRIM and SSD-specific optimizations in certain
guest operating systems that are limited to emulated controller types
(IDE, AHCI, and non-VirtIO SCSI).
This change also unifies the diverging IDE and SATA code paths in
QemuServer::print_drivedevice_full(), which suffered from:
* Code duplication: The only differences between IDE and SATA were in
bus-unit specification and maximum device counts.
* Inconsistent implementation: The IDE code used the new `ide-hd`
and `ide-cd` device types, whereas SATA still relied on the deprecated
`ide-drive` [3, 4] (which doesn't support `rotation_rate`).
* Different feature sets: The IDE code exposed a `model` property that
the SATA code didn't, even though QEMU supports it for both.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1498042
[2] https://lists.gnu.org/archive/html/qemu-devel/2017-10/msg00698.html
[3] https://www.redhat.com/archives/libvir-list/2012-March/msg00684.html
[4] https://lists.gnu.org/archive/html/qemu-devel/2017-05/msg02024.html
Signed-off-by: Nick Chevsky <nchevsky@gmail.com>
we will use this for the qmeventd, but we have to limit this
to qemu 2.12, because we cannot add this during a live migration
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Instead of our own. The code is almost the same, but the
upstream implementation uses qemu's transactional system and
performs a drain() on the block device first. This seems to
help avoid some issues we run into with qcow2 files when
creating snapshots.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
do not use $1 do write out config, if code gets added this may easily
get overwritten, as vmgenid is a fixed key just hardcode it.
also move the comment to where it actually belongs
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This caused a few hiccups with qemu 3.0...
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Acked-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of overwriting the 'machine' config in the snapshot,
use its own 'runningmachine' config only for the snapshot
this way, we do not lose the machine type if it was
explicitely set during the snapshot, but deleted afterwards
we also have to adapt the tests for this
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
> The following are important CPU features that should be used on
> Intel x86 hosts, when available in the host CPU. Some of them
> require explicit configuration to enable, as they are not included
> by default in some, or all, of the named CPU models listed above.
> In general all of these features are included if using “Host
> passthrough” or “Host model”.
>
> pcid: Recommended to mitigate the cost of the Meltdown
> (CVE-2017-5754) fix. Included by default in Haswell, Broadwell &
> Skylake Intel CPU models. Should be explicitly turned on for
> Westmere, SandyBridge, and IvyBridge Intel CPU models. Note that
> some desktop/mobile Westmere CPUs cannot support this feature.
>
> spec-ctrl: Required to enable the Spectre (CVE-2017-5753 and
> CVE-2017-5715) fix, in cases where retpolines are not sufficient.
> Included by default in Intel CPU models with -IBRS suffix. Must be
> explicitly turned on for Intel CPU models without -IBRS suffix.
> Requires the host CPU microcode to support this feature before it
> can be used for guest CPUs.
>
> ssbd: Required to enable the CVE-2018-3639 fix. Not included by
> default in any Intel CPU model. Must be explicitly turned on for
> all Intel CPU models. Requires the host CPU microcode to support
> this feature before it can be used for guest CPUs.
>
> pdpe1gbr: Recommended to allow guest OS to use 1GB size pages.Not
> included by default in any Intel CPU model. Should be explicitly
> turned on for all Intel CPU models. Note that not all CPU hardware
> will support this feature.
-- https://www.berrange.com/posts/2018/06/29/cpu-model-configuration-for-qemu-kvm-on-x86-hosts/
changelog v2:
- remove hash
- remove check if cdrom
if we try to delete a snapshot, and that is disk from the snapshot
is not attached anymore (unused), we can't delete the snapshot
with qemu snapshot delete command (for storage which use it (qcow2,rbd,...))
example:
...
unused0: rbd:vm-107-disk-3
[snap1]
...
scsi2: rbd:vm-107-disk-3,size=1G
-> die
qmp command 'delete-drive-snapshot' failed - Device 'drive-scsi2' not found
If drive is not attached, we need to use the storage snapshot delete command
tells an user what would get touched, so he has a chance to fix
unwanted things before changes are actually made.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Else an user has no idea what, or if something happened.
Gets printed to tty when using qm rescan or to tasklog for the case
where we do a rescan after restoring a backup.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Unused disk(s) appeared after a rescan of storages. Especially shown
with ceph pools, where two storage entries are made, <storage>_ct and
<storage>_vm. The rescan method did include images from both storages.
This patch filters any storage not containing the content type 'images'.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
when a vm is suspended (e.g. autosuspend on windows)
we detect that it is not running, display the resume button,
but 'cont' does not wakeup the system from suspend
with this we can wake up suspended vms
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the not definedness check is unecessary here, since it does not
do anything then, and to check balloon twice is also not necessary
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Deleting the balloon config entry means resetting it to its
default. This means having a balloon device but not actually
doing any ballooning with it (iow. resetting the VM's
'balloon' value to its specified memory.).
Hotplugging a balloon device (coming from explicit '0' to
any other value (including deleting it)) is not possible.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
To avoid potential cleanup & post-start actions to cause
unwanted processes (such as gpg-agent) to be started as part
of the scope, as the enter_systemd_scope() function causes
the current process to enter the scope.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
when using q35 as machine type, there are nested pci-bridges,
but we only checked the first layer
this resulted in not being able to hotplug scsi devices,
because scsihw0 was deeper in the pci-bridge construct, we did not see
it and tried to add it (which fails of course)
this patch checks all bridges, regardless how deeply nested they are
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
it is not necessary to check the romfile of the running vm
for .pxe machine types, since the machine type itself is not
hot-pluggable
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we accidentally moved nbd_stop to CloudInit.pm in
commit 0c9a7596f6
and removed it in
commit 3db6e4ab70
without realizing that live local storage migration still depends on it
readd it
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
With QEMU 2.10 the serial parameter of the -drive command line option
was deprecated [1], so move the logic which adds this parameter now
to the -drive analogue -device CLI option.
Features marked deprecated will continue to work for two releases[2],
so we need to switch over before 2.12, AFAICT.
[1]: https://wiki.qemu.org/ChangeLog/2.10#Deprecated_options
[2]: https://qemu.weilnetz.de/doc/qemu-doc.html#Deprecated-features
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
since this requires O_DIRECT support by the underlying storage, which
might not be available.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
this fixes an issue with zvols, which require cache=none and eat up all
free memory as buffered pages otherwise
https://github.com/zfsonlinux/zfs/issues/7235
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Modern noVNC does not needs this anymore, actually things may get
worse if it's used. E.g., when one sets 'de' and the VM locale is
'de' you may get a 'ĸ' (unicode kra) if you want to send an ampersand
character through pressing SHIFT + 6.
Qemus manual pages confirms that this is most times not needed
anymore:
> -k language
> Use keyboard layout language (for example "fr" for
> French). This option is only needed where it is not
> easy to get raw PC keycodes (e.g. on Macs, with some
> X11 servers or with a VNC or curses display). You don't
> normally need to use it on PC/Linux or PC/Windows
> hosts.
-- man kvm
An user can always set it per VM, wew simply remove the implict
default derived from the cluster wide datacenter.cfg
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The git history of this is not immediately obvious due to
the date of the cloud init patches, but the removal of this
line was basically reverted by them later at merge-time.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
We introduced our QMP socket with commit
c971c4f221 (29.05.2012)
Already tried to remove this with commit
7b7c6d1b5d (13.07.2012)
But reverted that to allow migration of VMs still using the old
montior to ones which already switched over to the new QMP one,
in commit dab36e1ee9 (17.08.2012)
see bug #242 for reference
This was all done and released in PVE 2.2, as no migration through
nodes differing more than one major version is possible we can
finally remove this code for good.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Checking for the cgroup directory is a kind of time-of-check
time-of-use race condition stop-mode backups seem to
occasionally run into on some systems.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
With configdrives we end up with the /etc/network/interfaces
file containing the interface names we use on the disk, ie.
eth0/eth1/..., which doesn't work on systems which do not
use this name.
With the 'nocloud' image type we can provide a
network-config in yaml which matches mac addresses. Ideally
we'd use version 2, but debian stretch ships with a too old
cloud-init for this, so for now we're writing version 1.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
move: don't error out with "you can't move a cdrom"
clone: always full-clone cloud-init images
They get completely replaced anyway at the next start, so
there's no point in keeping them.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
*) always replace old cloudinit images
*) apply pending cloudinit changes when generating a new
image
For cloudinit we now always use vdisk_free before
vdisk_alloc in order to always replace old images, this
allows us to hotplug a new drive by setting it to
`none,media=cdrom` first (to eject the disk), then setting
it back to 'storage:cloudinit' to have a new image generated
after applying the currently pending changes.
socat tunnel for nbd mirror was introduce here
https://pve.proxmox.com/pipermail/pve-devel/2017-January/024777.html
to workaround when nbd client was hanging on non responding nbd server.
We have added a 30s timeout on socat tunnel, but when we migrate
multiple disks, it can break migration if for example first disk
is already finished and don't send any new datas in the tunnel.
The connect timeout bug has been fixed in qemu 2.9,
so we can remove the socat tunnel now.
With shared=1, (live) migration ignores the disk and assumes it is
present on all target nodes. This works similar to shared=1 on LXC
mountpoints.
Signed-off-by: Chris Hofstaedtler <chris.hofstaedtler@deduktiva.com>
Reviewed-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
if the value was '0', we did not append the option to the drive,
resulting in wrong command line if the qemu default of an option is not
'0'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Skylake-Server is the Xeon variant of Skylake
max is "all features supported by the accelerator in the current host"
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
this have the 'spec-ctrl' flag by default to allow IBRS based Spectre
mitigation by the guest kernel.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Hugepages can take some time to be allocated by qemu at start (60s for 120G of 1G hugepages).
This patch increase start timeout to 5min when hugepages are enabled.
Currently this only allows specifying '+pcid' or '-pcid'
but might be extended in the future.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Fixes: 2bfbee039b ("include format for efidisk")
Reviewed-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This also fixes a bug where VMs with no memory defined in the config
where reported as using 0MB instead of 512.
Signed-off-by: Emmanuel Kasper <e.kasper@proxmox.com>
when having an unused disk on a storage for which there are multiple
definitions, we added it again on another storage when that storage
was alphabetically before the already existing one
this happens for example when using our automatically generated
ceph storages: 'pool_ct' and 'pool_vm' and having a vm with
an unused disk
with this patch, we also leave the unused disks in the hash
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this means that we do not include the '-k' parameter anymore by default
(which is deprecated by qemu)
with this, noVNC and spice always respect the guest keyboard
configuration and altgr keys work without problems
tested:
ubuntu with english intl and german with novnc and spice
windows 10 with english intl and german with novnc and spice
live migration
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since the guest-fsfreeze-freeze command has a timeout of 1 hour,
we want to check if the guest-agent even runs before executing that,
or else we wait 1 hour and then continue
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Reviewed-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
if the efidisk is in 'raw' format, qemu will prevent writes
on block zero if the format is not explicitely given
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
'These options take an integer value and control the "cpu.shares"
control group attribute. The allowed range is 2 to 262144. Defaults to
1024.' – man 5 systemd.resource-control
we only checked if a vm had in use base disks when deleting them,
at which point we do not stop to delete the vm even when a
disk deletion fails, which means we could successfully delete the config
and all not used (base) disks of a template, resulting in left over vm disks
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
perls 'local' must be either used in front of each $SIG{...}
assignments or they must be put in a list, else it affects only the
first variable and the rest are *not* in local context.
In all cases the global signal handlers we overwrote were in cli programs or
forked workers, not in daemons.
this was only kept for PVE 4.X where the switch to the newer OVMF
image with actual working persisten EFIVARS was made.
We do not ship this old image in PVE 5.0 anymore so remove this
legacy code as it can never trigger anyhow.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
factor out code in a new create_efidisk submethod, as else this code
is hardly readable as the efidisk0 case is a special case. Refer from
putting all this specialised handling directly to the much shorter
code for all other cases.
Also the disk was created with a specific format and then a format
detection on the newly created disk was done, which is pretty
useless, clear that up.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
perls 'local' must be either used in front of each $SIG{...}
assignments or they must be put in a list, else it affects only the
first variable and the rest are *not* in local context.
This may cause weird behaviour where daemons seemingly do not get
terminating signals delivered correctly and thus may not shutdown
gracefully anymore.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Moved the check to the beginning of the function.
VMs configured to use KVM won't start if KVM is not available.
VMs not configured to use KVM will start regardless.
Fixes a typo in the function name and removes the $nokvm parameter, as it's only
used to immideately exit the function. Instead calling the function
conditionally.
If we get an VM machine older than 2.9 we use the old selection
expression for the VGA type. This allows to live migrate VMs to PVE
5.0 from beta 1 and PVE 4.4 again.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the syntax was wrong, it was (e.g. for iops-write):
throttling.iops-write=-max100
instead of
throttling.iops-write-max=100
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
QemuServer::lspci() iterates over /sys/bus/pci/devices which
doesn't guarantee any order which means functions sometimes
ended up in the wrong order and it was never clear which
one would get the additional options such as x-vga passed
to them.
bps_max_length & friends were wrongly named and were only
passed to qemu when hot-applying changes. They can only
be passed via the command line with their new names. For
consistency let's rename them all, that way they're all in
one place.
Fixes#1195 (for real this time).
We cannot look for ports on "any" wildcard address while
letting qemu bind to "localhost", this may lead to a qemu
process occupying ::1 while the next search successfully
finds the same port available for IPv4's '*' address.
Instead, we now lookup the IP of the desired family for
'localhost'. Note that while we could simply be hardcoding
::1 or 127.0.0.1, with this code we are protocol agnostic.
For calculation of "current_core" the input variable id is decremented.
For calculation of "current_socket" this decrement was missing resulting
in a wrong value when "cores" is set to 1.
Signed-off-by: Tobias Böhm <tb@robhost.de>
