this patch moves the create osd button into the osd panel
and puts the ceph diskselector into ceph/OSD.js
also remove the vdev parameter there, because on the osd panel
we cannot preselect a disk
this patch makes it possible to remove the ceph disk panel alltogether
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this patch adds a disk list panel which:
lists the disks with typical columns
(type, vendor, serial, smart, wearout, etc.)
and with a doubleclick you can show the smart attributes
and with a click on init disk you can initialize a disk
with a gpt table
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this adds a show config button to the storage contentview
so that you can show the backup configuration from there
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
removes the check for dir or nfs storage,
because a few lines below we check for
the content type vztmpl
which should only be allowed when we have a
location where we put templates, thus we should
be able to download them there
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this makes summary its own point again,
and moves network,dns,time and syslog under
services which now is "system", which makes the order
of the options the same as before, with one exception
shell (previous console) is now the third option
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this patch removes the "system" group
and reorders the options like it was before,
with one exception:
console now comes at second place after summary
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
jslint needs FileReader as global
jslint want object.property instead of object['property']
jslint does not like trailing commas
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since we do not use tabpanels anymore,
the hide calls and listeners do nothing,
so we can drop them
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this removes all subconfigpanel related code,
since it is not needed anymore
we now have the treelist/cardpanel combo instead of tabpanels
which means we can drop the whole subconfigpanel class
and subclasses
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
instead of having 2 panels,
we have now a splitted panel
with both config and crushmap
also drop the not needed [] around the alias
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
use new tree functionality of configpanel
move options,monitor,console under hardware (now system)
move firewall subpanels into tree
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
use new tree functionality of configpanel
move options,network,dns,console under resources (now system)
move firewall subpanels into tree
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
use new tree functionality of the configpanel
move services,time,syslog and shell under summary
move dns,firewall under network
move subpanels of firewall and ceph in the tree
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
use the new tree functionality of the configpanel
make users,groups,pools,roles and auth
subitems of permissions (expanded by default)
instead of using the subconfigpanel for
ha and firewall, use the panels directly
as subitems of ha-status and firewall-rules
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this patch changes configpanel class,
so that instead of creating a tabpanel,
we now are a card panel which uses a treelist
to choose the active card
this changes how the panel looks:
instead of having countless tabs on the top
we now can have a nice tree structure on the left
how the items will be interpreted by the tree
is commented in www/manager6/panel/ConfigPanel.js
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this was probably missed in a previous refactoring, the
filehandle is only opened and closed here and read_aplinfo()
already opens and closes the file itself.
instead of importing the trusted gpg keys into root's
.gnupg on each appliance list update, install a trusted
keyring generated at build time.
verify signatures with gpgv and the trusted keyring instead
of gpg --verify on root's keyring with output parsing.
adds a help button to the following panels in the lxc wizard
Template (points to: Container Images)
Root Disk (points to: Container Storage)
Network (points to: Container Network)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
when a vzdump script is set and the backup fails early (eg.
when exceeding the number of backups) run_hook_script()
showed an uninitialized value error trying to use
$task->{mode} which is set only after prepare() was called.
This sets $task->{mode} early, still updated later to $stop
if !$running, and changes the condition for whether
cleanup() should be called to not use $task->{mode} (which
makes no real sense anyway) to using the $cleanup hash like
the rest of the code.
The current position inside the Workspace is saved via the StateProvider
separately thus this clearing operation do not lose the previous selection.
As a side effect by calling setContent(null) on logout we also fix the
following bug:
when logging out while the Syslog tab of the Node panel was displayed,
you had to login twice due a to a race condition in the store
load of the Syslog panel. ( The login call could complete successfully
before a backgroup store load, causing the faild store load call
to redisplay a login window)
this implements the new StatusView class for
guests and templates
using the new pveStatusView, we do not split the status
panels per lxc/qemu, but for Template/Guest
this makes more sense, since the information which lxc
and qemu guests have are more similar than what you want
to display for templates/guests
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this adds a component StatusView which is intended to
replace the old statusview panels of qemu/lxc/nodes
(later maybe also pools and storages)
it extends Ext.panel.Panel and expects an rstore and title
it is not intended to be used directly but to be subclassed
it works like this:
on instantiating, it adds a listener to the rstore load,
so that on every rstore load 'updateValues' gets executed
there, if successful, looks for every subcomponent of type
'pveInfoWidget' and calls 'updateField' on it
'updateField' calculates the update text and value for
the info widgets based on the given class variables
using either:
textField -> which gets the value from the store and
displays it simple as text (with renderer and calculator)
or valueField and (optional) maxField
where it determines the usage
(also with a renderer and calculator)
for both there is a default calculator/renderer
but this can be overwritten when instantiating/declaring
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this adds a new component, which is 2 labels
(left the title and right the text) with a
small progressbar
it has a method updateValue, where it takes a string and
a value from 0 to 1 and updates the right label
and the progressbar
the progressbar gets a different css class at >60% and
>90% (i added some css classes to make it yellow and red
respectively)
the warning and critical thresholds are customizable
this will be used in a new version of the statusview
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
