Without this, the button is enabled if no entry at all is selected (e.g.
when switching to the 'User Management' tab), with the button then
(obviously) being a noop.
Signed-off-by: Christoph Heiss <c.heiss@proxmox.com>
For one these different views have different columns shown, and more
importantly: with the state being shared one could change sorting in
the global view and then have that applied in the per-datastore view
too, even if one cannot sort that view explicitly otherwise as there's
just one row anyway. This small glitch might lead to a bit of
confusion in the worst case and looks unpolished in any way.
Note that I explicitly decided against encoding the datastore in the
state-id for the per-datastore views for now, as most users will want
to adapt layout (like column width) for all per-datastores views.
Having to re-do that for every datastore separately can be quite a
nuisance while the same user wanting different layout for each
datastore in their per-datastore view seems rather to be an edge case.
And we can always change this, so starting out with the slightly more
restricted design that has less browser local data to be saved seems
better w.r.t. maintainability.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Make columns sortable in the global 'Prune & GC Jobs' view. In the
per-datastore view the columns will not be sortable as there can only be
one job.
Fixes: db3fd213 ("fix #3217: ui: global prune and gc job view")
Co-authored-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
Tested-by: Max Carrara <m.carrara@proxmox.com>
This commit adds the same notification configuration panel that we
already use in Proxmox VE.
Signed-off-by: Lukas Wagner <l.wagner@proxmox.com>
Tested-by: Gabriel Goller <g.goller@proxmox.com>
Reviewed-by: Gabriel Goller <g.goller@proxmox.com>
Tested-by: Maximiliano Sandoval <m.sandoval@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to avoid drifting definitions and reduce duplication. with the next major
release, the 'upid' field could then be renamed and aliased to be in line with
the other jobs, which all use 'last-run-upid'. doing it now would break
existing callers of the GC status endpoint (or consumers of the on-disk status
file).
the main difference is that the GC status fields are now not optional (except
for the UPID) in the job status, since flattening an optional value is not
possible. this only affects datastores that were never GCed at all, and only
direct API consumers, since the UI handles those fields correctly.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
setting `width` and `flex` in a column simultaneously won't work, and
the `flex` value takes priority. So remove the unused `width`
properties.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
before, this was only used where the top list was a fixed size and only
for one datastore (which limits the number of prune jobs a bit)
since now we show gc jobs for all datastores here too and all their
prune jobs, this panel can get much bigger.
To improve it's scrolling sizing behavior, make the prune jobs panel
`flex: 1`, so it fills out the rest of the view, and add a splitter
between them so one can resize them on the fly. To prevent making one of
the panels too small, set an appropriate minHeight for both and make the
surrounding panel scrollable.
To not save the height into it's state, we have to filter that out for
the GCView.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
The ternary ? operator should be at the start of the line if the
the expression is split into multiple lines.
Signed-off-by: Lukas Wagner <l.wagner@proxmox.com>
Tested-by: Gabriel Goller <g.goller@proxmox.com>
table expands to the full width and relevant data is still visible on a
narrow screen.
Signed-off-by: Stefan Lendl <s.lendl@proxmox.com>
Tested-by: Gabriel Goller <g.goller@proxmox.com>
Reviewd-by: Gabriel Goller <g.goller@proxmox.com>
Tested-by: Lukas Wagner <l.wagner@proxmox.com>
Reviewed-by: Lukas Wagner <l.wagner@proxmox.com>
Show the removed and pending data of the last run formatted with
Proxmox.Utils.format_size for better readability identically to data
display in the overview tab.
Signed-off-by: Stefan Lendl <s.lendl@proxmox.com>
Tested-by: Gabriel Goller <g.goller@proxmox.com>
Reviewd-by: Gabriel Goller <g.goller@proxmox.com>
Reviewed-by: Lukas Wagner <l.wagner@proxmox.com>
Suggested-by: Lukas Wagner <l.wagner@proxmox.com>
In the global datastore view, extend the prune view to display gc job
status as a table. Use the same widget in the local view and dispaly gc
job status as a single row.
The local PruneAndGC view is parameterized (cbind) with the datastore.
At initialization the only row is selected. This allows the rest of the
grid to act on selected rows and it requires far less special casing if
the datastore is set on the view or not.
Having a single row always selected and therefore highlighted, is
visually not appealing. Therefore, highlighting of selected rows is
disabled in the local view.
Moved GCView to different file and enhanced it with last, next run,
status and duration. Added button to show task log.
Changed `render_task_status()` to also take in account upids stored in
other 'columns'.
Signed-off-by: Stefan Lendl <s.lendl@proxmox.com>
[LW: include ref to bugzilla in commit message]
Signed-off-by: Lukas Wagner <l.wagner@proxmox.com>
Originally-by: Gabriel Goller <g.goller@proxmox.com>
Tested-by: Gabriel Goller <g.goller@proxmox.com>
Reviewd-by: Gabriel Goller <g.goller@proxmox.com>
Tested-by: Lukas Wagner <l.wagner@proxmox.com>
Reviewed-by: Lukas Wagner <l.wagner@proxmox.com>
In the edit dialog we already use 'Max. Depth', so it makes sense
to use the same term in the overview.
Signed-off-by: Lukas Wagner <l.wagner@proxmox.com>
Similar to a recent change in pve-access-control [0], add a new
'confirmation-password' parameter to the change-password endpoint and
require non-root users to confirm their passwords.
Doing so avoids that an attacker that has direct access to a computer
where a user is logged in to the PVE interface can change the password
of said user and thus either prolong their possibility to attack,
and/or create a denial of service situation, where the original user
cannot login into the PVE host using their old credentials.
Note that this might sound worse than it is, as for this attack to
work the attacker needs either:
- physical access to an unlocked computer that is currently logged in
to a PVE host
- having taken over such a computer already through some unrelated
vulnerability
As these required pre-conditions are pretty big implications, which
allow (temporary) access to all of the resources (including PVE ones)
that the user can control, we see this as slight improvement that
won't hurt, might protect one in some specific cases that is simply
too cheap not to do.
For now we avoid additional confirmation through a second factor, as
that is a much higher complexity without that much gain, and some
forms like (unauthenticated) button press on a WebAuthn token or the
TOTP code would be easy to circumvent in the physical access case and
in the local access case one might be able to MITM themselves too.
[0]: https://git.proxmox.com/?p=pve-access-control.git;a=commit;h=5bcf553e3a193a537d92498f4fee3c23e22d1741
Reported-by: Wouter Arts <security@wth-security.nl>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
[ TL: Extend ocmmit message, squash in UI change ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
no need to keep a copy of that component here, just re-use the common
one from widget-toolkit. That one provides also some more features
that will be used here with a next commit.
Originally-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
[ TL: move switch to common widget up front ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by adding the 'totp-locked' column to the model
a diff store can only know if a column has changed if the column is
defined in the model, otherwise it'll only load it the first time
(when the 'load' called on the diff store)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we use 'enable' property here with a default of true, so change
the dataIndex and the renderer to reflect that
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
The `ACME` panel may be rendered out of sight (overflow) when there
are enough SANs on the upper `Certificates` panel to push it down
enough and the browser/display height is too small.
Enable the `scrollable` config for the parent certificate view panel
in the y-axis (vertical) to make ExtJS automatically add a scrollbar
if the content overflows. Avoid enabling it for the x-axis too as
that breaks reflow of the layout if the browser window gets resized.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[T: fix commit message to one from manager ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
simple CRUD interface to show/add/edit/delete metric servers
it's a bit different from PVE's so it's harder to reuse that than to
copy it. If we need it again, we can still refactor and combine them.
introduce 'PBS.Schema' class to hold the server type/xtype mappings
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
which allows us also to drop the initial manual load in the init,
which would also trigger if the tab isn't visible.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Fix missing load on initial view, re-use the prune input panel for
editing and avoid using a tab panel for a single tab, rework also
some columns widths and various other small parts-
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
with namespaces the paths can get pretty complex, so make the path
column take some flex space too, but not too much to avoid making it
look odd for the short paths we have otherwise
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Without namespaces this had not much use, but now that we can have
permissions below we should allow so.
For convenience also query the namsepaces here and add them to the
list of available ACL paths, the read-dir shouldn't be that expensive
(albeit, we could cache them in the frontend)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Allows setting the default language in Configuration/Other/General
Signed-off-by: Matthias Heiserer <m.heiserer@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this is nothing to important and nothing that'll get changed *that*
often, so 2.5s is more than enough.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
`deactivate` is only triggered if we switch to a different tab on
the same navigation level, but if we switch to a completely different
component (e.g., fom `Options -> Others` to `Datastore foo`) we can
only work with the destroy event, use the before one as else we
cannot access the view controllers method anymore.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
also fixup missing emptyText for fingerprint (adapted from PVE's PBS
storage addition) and code-style in surrounding areas a bit
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
