where appropriate. these should never leak anything sensitive, as we
check privs before checking existence or existence is already known at
that point via other privileges.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
use the relatively new variant of ListAccessibleBackupGroups to also
allow pruning the groups that one doesn't own but has the respective
privileges on their namespace level.
This was previously handled by the API endpoint itself, which was ok
as long as only one level was looked at.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Not only check all owned backup groups, but also all that an auth_id
has DATASTORE_AUDIT or DATASTORE_READ on the whole namespace.
best viewed with whitespace change ignore (-w)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
properly encode the namespace as separate field both for manual prunes
and the job. fix the access checks as well now that the job doesn't use
the jobid as workerid anymore.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
this is the most common sequence of checks we have in this file, so
let's have a single place where we implement it.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
these happen together very often.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
else this could leak existence of datastore.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the helper now takes both high-privilege and lesser-privilege privs, so
the resulting bool can be used to quickly check whether additional
checks like group ownership are needed or not.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We decided to go this route because it'll most likely be
safer in the API as we need to explicitly add namespaces
support to the various API endpoints this way.
For example, 'pull' should have 2 namespaces: local and
remote, and the GroupFilter (which would otherwise contain
exactly *one* namespace parameter) needs to be applied for
both sides (to decide what to pull from the remote, and what
to *remove* locally as cleanup).
The *datastore* types still contain the namespace and have a
`.backup_ns()` getter.
Note that the datastore's `Display` implementations are no
longer safe to use as a deserializable string.
Additionally, some datastore based methods now have been
exposed via the BackupGroup/BackupDir types to avoid a
"round trip" in code.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We probably can combine the base permission + owner check, but for
now add explicit ones to upfront so that the change is simpler as
only one thing is done.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
allow to list any namespace with privileges on it and allow to create
and delete namespaces if the user has modify permissions on the parent
namespace.
Creation is only allowed if the parent NS already exists.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
these are the ones for non-#[api] methods, also fill in the
namespace in prune operations
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Make it easier by adding an helper accepting either group or
directory
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
And drop the base_path parameter on a first bunch of
functions (more reordering will follow).
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
And use the api-types for their contents.
These are supposed to be instances for a datastore, the pure
specifications are the ones in pbs_api_types which should be
preferred in crates like clients which do not need to deal
with the datastore directly.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
datastore's group_path will be moved to BackupDir soon and
this is required to be able to properly distinguish them
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
The type is a real enum.
All are API types and implement Display and FromStr. The
ordering is the same as it is in pbs-datastore.
Also, they are now flattened into a few structs instead of
being copied manually.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Avoid collecting the whole group list in memory only to iterate and
filter over it again.
Note that the change could result in a indentation change, so best
viewed with `-w` flag.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by using the newly added 'create_tar' and the 'ZstdEncoder'
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
namely /admin/datastore/{store}/snapshots
and /nodes/{node}/tasks
since those are api calls where the result can get quite large
with this change, the serialization is now streaming instead of making
a `Value` in memory.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
- imported pbs-api-types/src/common_regex.rs from old proxmox crate
- use hex crate to generate/parse hex digest
- remove all reference to proxmox crate (use proxmox-sys and
proxmox-serde instead)
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
for gettin/setting the protected flag for snapshots (akin to notes)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
when a group could not be completely removed due to protected snapshot,
throw an error
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
adds the info that a snapshot is protected to:
* snapshot list
* manual pruning (also dry-run)
* prune jobs
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Because the types used inside the RRD have other requirements
than the API types:
- other serialization format
- the API may not support all RRD features
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
In order to avoid name conflicts with WorkerTaskContext
- renamed WorkerTask::log to WorkerTask::log_message
Note: Methods have different fuction signatures
Also renamed WorkerTask::warn to WorkerTask::log_warning for
consistency reasons.
Use the task_log!() and task_warn!() macros more often.
some workers did not log when called via cli
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
ApiConfig: avoid using pbs_config::backup_user()
CommandoSocket: avoid using pbs_config::backup_user()
FileLogger: avoid using pbs_config::backup_user()
- use atomic_open_or_create_file()
Auth Trait: moved definitions to proxmox-rest-server/src/lib.rs
- removed CachedUserInfo patrameter
- return user as String (not Authid)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to prune the whole datastore at once, with the given parameters.
We need a new api call since this can take a while and we need to start
a worker for this. The exisiting api call returns a list of removed/kept
snapshots and is synchronous.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by using the api macro and reusing the PruneOptions from pbs-datastore
this means we can now drop the 'add_common_prune_prameters' macro
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Stored in atomically-updated 'notes' file in backup group directory.
Available via dedicated GET/PUT API calls, as well as the first line
being included in list_groups (similar to list_snapshots).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
admin/datastore reads linearly only, so no need for cache (capacity of 1
basically means no cache except for the currently active chunk).
mount can do random access too, so cache last 8 chunks for possibly a
mild performance improvement.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
so that a user can delete a whole group at once, until now, the fastest
way for this was to prune to one snapshot, and delete that
code is basically a copy/paste from the snapshot delete, sans
the 'backup-time' parameter
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Treat filepaths like "/root.pxar.didx" without a trailing slash as
wanting to download the entire archive content instead of erroring. The
zip-creation code already works fine for this scenario.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
we will reuse that code in the client, so we need to move it to
where we can access it from the client
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[clippy fixes]
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
we will reuse that later in the client, so we need it somewhere
we can use from there
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[add strongly typed ArchiveEntry and put api code into helpers.rs]
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
all the verify methods pass along the following:
- task worker
- datastore
- corrupt and verified chunks
might as well pull that out into a common type, with the added bonus of
now having a single point for construction instead of copying the
default capacaties in three different modules..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
