mirror_zfs/lib/libzfs/libzfs_status.c

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or https://opensource.org/licenses/CDDL-1.0.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
 * Copyright (c) 2012 by Delphix. All rights reserved.
 * Copyright (c) 2013 Steven Hartland. All rights reserved.
 * Copyright (c) 2021, Colm Buckley <colm@tuatha.org>
 */

/*
 * This file contains the functions which analyze the status of a pool.  This
 * include both the status of an active pool, as well as the status exported
 * pools.  Returns one of the ZPOOL_STATUS_* defines describing the status of
 * the pool.  This status is independent (to a certain degree) from the state of
 * the pool.  A pool's state describes only whether or not it is capable of
 * providing the necessary fault tolerance for data.  The status describes the
 * overall status of devices.  A pool that is online can still have a device
 * that is experiencing errors.
 *
 * Only a subset of the possible faults can be detected using 'zpool status',
 * and not all possible errors correspond to a FMA message ID.  The explanation
 * is left up to the caller, depending on whether it is a live pool or an
 * import.
 */

#include <libzfs.h>
#include <libzutil.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/systeminfo.h>
#include "libzfs_impl.h"
#include "zfeature_common.h"

/*
 * Message ID table.  This must be kept in sync with the ZPOOL_STATUS_* defines
 * in include/libzfs.h.  Note that there are some status results which go past
 * the end of this table, and hence have no associated message ID.
 */
static const char *const zfs_msgid_table[] = {
	"ZFS-8000-14", /* ZPOOL_STATUS_CORRUPT_CACHE */
	"ZFS-8000-2Q", /* ZPOOL_STATUS_MISSING_DEV_R */
	"ZFS-8000-3C", /* ZPOOL_STATUS_MISSING_DEV_NR */
	"ZFS-8000-4J", /* ZPOOL_STATUS_CORRUPT_LABEL_R */
	"ZFS-8000-5E", /* ZPOOL_STATUS_CORRUPT_LABEL_NR */
	"ZFS-8000-6X", /* ZPOOL_STATUS_BAD_GUID_SUM */
	"ZFS-8000-72", /* ZPOOL_STATUS_CORRUPT_POOL */
	"ZFS-8000-8A", /* ZPOOL_STATUS_CORRUPT_DATA */
	"ZFS-8000-9P", /* ZPOOL_STATUS_FAILING_DEV */
	"ZFS-8000-A5", /* ZPOOL_STATUS_VERSION_NEWER */
	"ZFS-8000-EY", /* ZPOOL_STATUS_HOSTID_MISMATCH */
	"ZFS-8000-EY", /* ZPOOL_STATUS_HOSTID_ACTIVE */
	"ZFS-8000-EY", /* ZPOOL_STATUS_HOSTID_REQUIRED */
	"ZFS-8000-HC", /* ZPOOL_STATUS_IO_FAILURE_WAIT */
	"ZFS-8000-JQ", /* ZPOOL_STATUS_IO_FAILURE_CONTINUE */
	"ZFS-8000-MM", /* ZPOOL_STATUS_IO_FAILURE_MMP */
	"ZFS-8000-K4", /* ZPOOL_STATUS_BAD_LOG */
	"ZFS-8000-ER", /* ZPOOL_STATUS_ERRATA */
	/*
	 * The following results have no message ID.
	 *	ZPOOL_STATUS_UNSUP_FEAT_READ
	 *	ZPOOL_STATUS_UNSUP_FEAT_WRITE
	 *	ZPOOL_STATUS_FAULTED_DEV_R
	 *	ZPOOL_STATUS_FAULTED_DEV_NR
	 *	ZPOOL_STATUS_VERSION_OLDER
	 *	ZPOOL_STATUS_FEAT_DISABLED
	 *	ZPOOL_STATUS_RESILVERING
	 *	ZPOOL_STATUS_OFFLINE_DEV
	 *	ZPOOL_STATUS_REMOVED_DEV
	 *	ZPOOL_STATUS_REBUILDING
	 *	ZPOOL_STATUS_REBUILD_SCRUB
	 *	ZPOOL_STATUS_COMPATIBILITY_ERR
	 *	ZPOOL_STATUS_INCOMPATIBLE_FEAT
	 *	ZPOOL_STATUS_OK
	 */
};

#define	NMSGID	(sizeof (zfs_msgid_table) / sizeof (zfs_msgid_table[0]))

static int
vdev_missing(vdev_stat_t *vs, uint_t vsc)
{
	(void) vsc;
	return (vs->vs_state == VDEV_STATE_CANT_OPEN &&
	    vs->vs_aux == VDEV_AUX_OPEN_FAILED);
}

static int
vdev_faulted(vdev_stat_t *vs, uint_t vsc)
{
	(void) vsc;
	return (vs->vs_state == VDEV_STATE_FAULTED);
}

static int
vdev_errors(vdev_stat_t *vs, uint_t vsc)
{
	(void) vsc;
	return (vs->vs_state == VDEV_STATE_DEGRADED ||
	    vs->vs_read_errors != 0 || vs->vs_write_errors != 0 ||
	    vs->vs_checksum_errors != 0);
}

static int
vdev_broken(vdev_stat_t *vs, uint_t vsc)
{
	(void) vsc;
	return (vs->vs_state == VDEV_STATE_CANT_OPEN);
}

static int
vdev_offlined(vdev_stat_t *vs, uint_t vsc)
{
	(void) vsc;
	return (vs->vs_state == VDEV_STATE_OFFLINE);
}

static int
vdev_removed(vdev_stat_t *vs, uint_t vsc)
{
	(void) vsc;
	return (vs->vs_state == VDEV_STATE_REMOVED);
}

static int
vdev_non_native_ashift(vdev_stat_t *vs, uint_t vsc)
{
	if (getenv("ZPOOL_STATUS_NON_NATIVE_ASHIFT_IGNORE") != NULL)
		return (0);

	return (VDEV_STAT_VALID(vs_physical_ashift, vsc) &&
	    vs->vs_configured_ashift < vs->vs_physical_ashift);
}

/*
 * Detect if any leaf devices that have seen errors or could not be opened.
 */
static boolean_t
find_vdev_problem(nvlist_t *vdev, int (*func)(vdev_stat_t *, uint_t),
    boolean_t ignore_replacing)
{
	nvlist_t **child;
	uint_t c, children;

	/*
	 * Ignore problems within a 'replacing' vdev, since we're presumably in
	 * the process of repairing any such errors, and don't want to call them
	 * out again.  We'll pick up the fact that a resilver is happening
	 * later.
	 */
	if (ignore_replacing == B_TRUE) {
		char *type = fnvlist_lookup_string(vdev, ZPOOL_CONFIG_TYPE);
		if (strcmp(type, VDEV_TYPE_REPLACING) == 0)
			return (B_FALSE);
	}

	if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_CHILDREN, &child,
	    &children) == 0) {
		for (c = 0; c < children; c++)
			if (find_vdev_problem(child[c], func, ignore_replacing))
				return (B_TRUE);
	} else {
		uint_t vsc;
		vdev_stat_t *vs = (vdev_stat_t *)fnvlist_lookup_uint64_array(
		    vdev, ZPOOL_CONFIG_VDEV_STATS, &vsc);
		if (func(vs, vsc) != 0)
			return (B_TRUE);
	}

	/*
	 * Check any L2 cache devs
	 */
	if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_L2CACHE, &child,
	    &children) == 0) {
		for (c = 0; c < children; c++)
			if (find_vdev_problem(child[c], func, ignore_replacing))
				return (B_TRUE);
	}

	return (B_FALSE);
}

/*
 * Active pool health status.
 *
 * To determine the status for a pool, we make several passes over the config,
 * picking the most egregious error we find.  In order of importance, we do the
 * following:
 *
 *	- Check for a complete and valid configuration
 *	- Look for any faulted or missing devices in a non-replicated config
 *	- Check for any data errors
 *	- Check for any faulted or missing devices in a replicated config
 *	- Look for any devices showing errors
 *	- Check for any resilvering or rebuilding devices
 *
 * There can obviously be multiple errors within a single pool, so this routine
 * only picks the most damaging of all the current errors to report.
 */
static zpool_status_t
check_status(nvlist_t *config, boolean_t isimport,
    zpool_errata_t *erratap, const char *compat)
{
	pool_scan_stat_t *ps = NULL;
	uint_t vsc, psc;
	uint64_t suspended;
	uint64_t hostid = 0;
	uint64_t errata = 0;
	unsigned long system_hostid = get_system_hostid();

	uint64_t version = fnvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION);
	nvlist_t *nvroot = fnvlist_lookup_nvlist(config,
	    ZPOOL_CONFIG_VDEV_TREE);
	vdev_stat_t *vs = (vdev_stat_t *)fnvlist_lookup_uint64_array(nvroot,
	    ZPOOL_CONFIG_VDEV_STATS, &vsc);
	uint64_t stateval = fnvlist_lookup_uint64(config,
	    ZPOOL_CONFIG_POOL_STATE);

	/*
	 * Currently resilvering a vdev
	 */
	(void) nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_SCAN_STATS,
	    (uint64_t **)&ps, &psc);
	if (ps != NULL && ps->pss_func == POOL_SCAN_RESILVER &&
	    ps->pss_state == DSS_SCANNING)
		return (ZPOOL_STATUS_RESILVERING);

	/*
	 * Currently rebuilding a vdev, check top-level vdevs.
	 */
	vdev_rebuild_stat_t *vrs = NULL;
	nvlist_t **child;
	uint_t c, i, children;
	uint64_t rebuild_end_time = 0;
	if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN,
	    &child, &children) == 0) {
		for (c = 0; c < children; c++) {
			if ((nvlist_lookup_uint64_array(child[c],
			    ZPOOL_CONFIG_REBUILD_STATS,
			    (uint64_t **)&vrs, &i) == 0) && (vrs != NULL)) {
				uint64_t state = vrs->vrs_state;

				if (state == VDEV_REBUILD_ACTIVE) {
					return (ZPOOL_STATUS_REBUILDING);
				} else if (state == VDEV_REBUILD_COMPLETE &&
				    vrs->vrs_end_time > rebuild_end_time) {
					rebuild_end_time = vrs->vrs_end_time;
				}
			}
		}

		/*
		 * If we can determine when the last scrub was run, and it
		 * was before the last rebuild completed, then recommend
		 * that the pool be scrubbed to verify all checksums.  When
		 * ps is NULL we can infer the pool has never been scrubbed.
		 */
		if (rebuild_end_time > 0) {
			if (ps != NULL) {
				if ((ps->pss_state == DSS_FINISHED &&
				    ps->pss_func == POOL_SCAN_SCRUB &&
				    rebuild_end_time > ps->pss_end_time) ||
				    ps->pss_state == DSS_NONE)
					return (ZPOOL_STATUS_REBUILD_SCRUB);
			} else {
				return (ZPOOL_STATUS_REBUILD_SCRUB);
			}
		}
	}

	/*
	 * The multihost property is set and the pool may be active.
	 */
	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
	    vs->vs_aux == VDEV_AUX_ACTIVE) {
		mmp_state_t mmp_state;
		nvlist_t *nvinfo;

		nvinfo = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO);
		mmp_state = fnvlist_lookup_uint64(nvinfo,
		    ZPOOL_CONFIG_MMP_STATE);

		if (mmp_state == MMP_STATE_ACTIVE)
			return (ZPOOL_STATUS_HOSTID_ACTIVE);
		else if (mmp_state == MMP_STATE_NO_HOSTID)
			return (ZPOOL_STATUS_HOSTID_REQUIRED);
		else
			return (ZPOOL_STATUS_HOSTID_MISMATCH);
	}

	/*
	 * Pool last accessed by another system.
	 */
	(void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_HOSTID, &hostid);
	if (hostid != 0 && (unsigned long)hostid != system_hostid &&
	    stateval == POOL_STATE_ACTIVE)
		return (ZPOOL_STATUS_HOSTID_MISMATCH);

	/*
	 * Newer on-disk version.
	 */
	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
	    vs->vs_aux == VDEV_AUX_VERSION_NEWER)
		return (ZPOOL_STATUS_VERSION_NEWER);

	/*
	 * Unsupported feature(s).
	 */
	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
	    vs->vs_aux == VDEV_AUX_UNSUP_FEAT) {
		nvlist_t *nvinfo = fnvlist_lookup_nvlist(config,
		    ZPOOL_CONFIG_LOAD_INFO);
		if (nvlist_exists(nvinfo, ZPOOL_CONFIG_CAN_RDONLY))
			return (ZPOOL_STATUS_UNSUP_FEAT_WRITE);
		return (ZPOOL_STATUS_UNSUP_FEAT_READ);
	}

	/*
	 * Check that the config is complete.
	 */
	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
	    vs->vs_aux == VDEV_AUX_BAD_GUID_SUM)
		return (ZPOOL_STATUS_BAD_GUID_SUM);

	/*
	 * Check whether the pool has suspended.
	 */
	if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_SUSPENDED,
	    &suspended) == 0) {
		uint64_t reason;

		if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_SUSPENDED_REASON,
		    &reason) == 0 && reason == ZIO_SUSPEND_MMP)
			return (ZPOOL_STATUS_IO_FAILURE_MMP);

		if (suspended == ZIO_FAILURE_MODE_CONTINUE)
			return (ZPOOL_STATUS_IO_FAILURE_CONTINUE);
		return (ZPOOL_STATUS_IO_FAILURE_WAIT);
	}

	/*
	 * Could not read a log.
	 */
	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
	    vs->vs_aux == VDEV_AUX_BAD_LOG) {
		return (ZPOOL_STATUS_BAD_LOG);
	}

	/*
	 * Bad devices in non-replicated config.
	 */
	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
	    find_vdev_problem(nvroot, vdev_faulted, B_TRUE))
		return (ZPOOL_STATUS_FAULTED_DEV_NR);

	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
	    find_vdev_problem(nvroot, vdev_missing, B_TRUE))
		return (ZPOOL_STATUS_MISSING_DEV_NR);

	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
	    find_vdev_problem(nvroot, vdev_broken, B_TRUE))
		return (ZPOOL_STATUS_CORRUPT_LABEL_NR);

	/*
	 * Corrupted pool metadata
	 */
	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
	    vs->vs_aux == VDEV_AUX_CORRUPT_DATA)
		return (ZPOOL_STATUS_CORRUPT_POOL);

	/*
	 * Persistent data errors.
	 */
	if (!isimport) {
		uint64_t nerr;
		if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRCOUNT,
		    &nerr) == 0 && nerr != 0)
			return (ZPOOL_STATUS_CORRUPT_DATA);
	}

	/*
	 * Missing devices in a replicated config.
	 */
	if (find_vdev_problem(nvroot, vdev_faulted, B_TRUE))
		return (ZPOOL_STATUS_FAULTED_DEV_R);
	if (find_vdev_problem(nvroot, vdev_missing, B_TRUE))
		return (ZPOOL_STATUS_MISSING_DEV_R);
	if (find_vdev_problem(nvroot, vdev_broken, B_TRUE))
		return (ZPOOL_STATUS_CORRUPT_LABEL_R);

	/*
	 * Devices with errors
	 */
	if (!isimport && find_vdev_problem(nvroot, vdev_errors, B_TRUE))
		return (ZPOOL_STATUS_FAILING_DEV);

	/*
	 * Offlined devices
	 */
	if (find_vdev_problem(nvroot, vdev_offlined, B_TRUE))
		return (ZPOOL_STATUS_OFFLINE_DEV);

	/*
	 * Removed device
	 */
	if (find_vdev_problem(nvroot, vdev_removed, B_TRUE))
		return (ZPOOL_STATUS_REMOVED_DEV);

	/*
	 * Suboptimal, but usable, ashift configuration.
	 */
	if (find_vdev_problem(nvroot, vdev_non_native_ashift, B_FALSE))
		return (ZPOOL_STATUS_NON_NATIVE_ASHIFT);

	/*
	 * Informational errata available.
	 */
	(void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRATA, &errata);
	if (errata) {
		*erratap = errata;
		return (ZPOOL_STATUS_ERRATA);
	}

	/*
	 * Outdated, but usable, version
	 */
	if (SPA_VERSION_IS_SUPPORTED(version) && version != SPA_VERSION) {
		/* "legacy" compatibility disables old version reporting */
		if (compat != NULL && strcmp(compat, ZPOOL_COMPAT_LEGACY) == 0)
			return (ZPOOL_STATUS_OK);
		else
			return (ZPOOL_STATUS_VERSION_OLDER);
	}

	/*
	 * Usable pool with disabled or superfluous features
	 * (superfluous = beyond what's requested by 'compatibility')
	 */
	if (version >= SPA_VERSION_FEATURES) {
		int i;
		nvlist_t *feat;

		if (isimport) {
			feat = fnvlist_lookup_nvlist(config,
			    ZPOOL_CONFIG_LOAD_INFO);
			if (nvlist_exists(feat, ZPOOL_CONFIG_ENABLED_FEAT))
				feat = fnvlist_lookup_nvlist(feat,
				    ZPOOL_CONFIG_ENABLED_FEAT);
		} else {
			feat = fnvlist_lookup_nvlist(config,
			    ZPOOL_CONFIG_FEATURE_STATS);
		}

		/* check against all features, or limited set? */
		boolean_t c_features[SPA_FEATURES];

		switch (zpool_load_compat(compat, c_features, NULL, 0)) {
		case ZPOOL_COMPATIBILITY_OK:
		case ZPOOL_COMPATIBILITY_WARNTOKEN:
			break;
		default:
			return (ZPOOL_STATUS_COMPATIBILITY_ERR);
		}
		for (i = 0; i < SPA_FEATURES; i++) {
			zfeature_info_t *fi = &spa_feature_table[i];
			if (!fi->fi_zfs_mod_supported)
				continue;
			if (c_features[i] && !nvlist_exists(feat, fi->fi_guid))
				return (ZPOOL_STATUS_FEAT_DISABLED);
			if (!c_features[i] && nvlist_exists(feat, fi->fi_guid))
				return (ZPOOL_STATUS_INCOMPATIBLE_FEAT);
		}
	}

	return (ZPOOL_STATUS_OK);
}

zpool_status_t
zpool_get_status(zpool_handle_t *zhp, const char **msgid,
    zpool_errata_t *errata)
{
	/*
	 * pass in the desired feature set, as
	 * it affects check for disabled features
	 */
	char compatibility[ZFS_MAXPROPLEN];
	if (zpool_get_prop(zhp, ZPOOL_PROP_COMPATIBILITY, compatibility,
	    ZFS_MAXPROPLEN, NULL, B_FALSE) != 0)
		compatibility[0] = '\0';

	zpool_status_t ret = check_status(zhp->zpool_config, B_FALSE, errata,
	    compatibility);

	if (msgid != NULL) {
		if (ret >= NMSGID)
			*msgid = NULL;
		else
			*msgid = zfs_msgid_table[ret];
	}
	return (ret);
}

zpool_status_t
zpool_import_status(nvlist_t *config, const char **msgid,
    zpool_errata_t *errata)
{
	zpool_status_t ret = check_status(config, B_TRUE, errata, NULL);

	if (ret >= NMSGID)
		*msgid = NULL;
	else
		*msgid = zfs_msgid_table[ret];

	return (ret);
}