In Linux, block devices currently lack support for `copy_file_range`
API because the kernel does not provide the necessary functionality.
However, there is an ongoing upstream effort to address this
limitation: https://patchwork.kernel.org/project/dm-devel/cover/20240520102033.9361-1-nj.shetty@samsung.com/.
We have adopted this upstream kernel patch into the TrueNAS kernel and
made some additional modifications to enable block cloning specifically
for the zvol block device. This patch implements the platform-
independent portions of these changes for inclusion in OpenZFS.
This patch does not introduce any new functionality directly into
OpenZFS. The `TX_CLONE_RANGE` replay capability is only relevant when
zvols are migrated to non-TrueNAS systems that support Clone Range
replay in the ZIL.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#16901
The count of chunks in a microzap block is stored as an uint16_t
(mze_chunkid). Each chunk is 64 bytes, and the first is used to store a
header, so there are 32767 usable chunks, which is just under 2M. 1M is
the largest power-2-rounded block size under 2M, so we must set the
limit there.
If it goes higher, the loop in mzap_addent can overflow and fall into
the PANIC case.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16888
VDEV_PROP_USERPROP is equal do VDEV_PROP_INVAL and so is not a real
property. That's why vdev_prop_readonly() does not work right for
it. In particular it may declare all vdev user properties readonly
on FreeBSD.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16890
It's a percentage and documented as such, but we were showing it as
<size>.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16881
As of kernel v5.8, pin_user_pages* interfaced were introduced. These
interfaces use the FOLL_PIN flag. This is preferred interface now for
Direct I/O requests in the kernel. The reasoning for using this new
interface for Direct I/O requests is explained in the kernel
documenetation:
Documentation/core-api/pin_user_pages.rst
If pin_user_pages_unlocked is available, the all Direct I/O requests
will use this new API to stay uptodate with the kernel API requirements.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16856
There were checks still in place to verify we could completely use
iov_iter's on the Linux side. All interfaces are available as of kernel
4.18, so there is no reason to check whether we should use that
interface at this point. This PR completely removes the UIO_USERSPACE
type. It also removes the check for the direct_IO interface checks.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16856
CONFIG_KERNEL_MODE_NEON depends on CONFIG_NEON. Neither is defined
on armel. Add a guard to avoid compilation errors.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#16871
We should not dereference rra after the last zio_nowait() is called.
It seems very unlikely, but ASAN in ztest managed to catch it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16868
It seems there's no good reason for vdev_disk & vdev_geom to explicitly
detect no support for flush and set vdev_nowritecache. Instead, just
signal it by setting the error to ENOTSUP, and let zio_vdev_io_assess()
take care of it in one place.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16855
The first time a device returns ENOTSUP in repsonse to a flush request,
we set vdev_nowritecache so we don't issue flushes in the future and
instead just pretend the succeeded. However, we still return an error
for the initial flush, even though we just decided such errors are
meaningless!
So, when setting vdev_nowritecache in response to a flush error, also
reset the error code to assume success.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16855
In dbuf_sync_leaf, we clone the arc_buf in dr if we share it with db
except for overridden case. However, this exception causes a race where
dbuf_new_size could free the arc_buf after the last dereference of
*datap and causes use-after-free. We fix this by cloning the buf
regardless if it's overridden.
The race:
--
P0 P1
dbuf_hold_impl()
// dbuf_hold_copy passed
// because db_data_pending NULL
dbuf_sync_leaf()
// doesn't clone *datap
// *datap derefed to db_buf
dbuf_write(*datap)
dbuf_new_size()
dmu_buf_will_dirty()
dbuf_fix_old_data()
// alloc new buf for P0 dr
// but can't change *datap
arc_alloc_buf()
arc_buf_destroy()
// alloc new buf for db_buf
// and destroy old buf
dbuf_write() // continue
abd_get_from_buf(data->b_data,
arc_buf_size(data))
// use-after-free
--
Here's an example when it happens:
BUG: kernel NULL pointer dereference, address: 000000000000002e
RIP: 0010:arc_buf_size+0x1c/0x30 [zfs]
Call Trace:
dbuf_write+0x3ff/0x580 [zfs]
dbuf_sync_leaf+0x13c/0x530 [zfs]
dbuf_sync_list+0xbf/0x120 [zfs]
dnode_sync+0x3ea/0x7a0 [zfs]
sync_dnodes_task+0x71/0xa0 [zfs]
taskq_thread+0x2b8/0x4e0 [spl]
kthread+0x112/0x130
ret_from_fork+0x1f/0x30
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Co-authored-by: Chunwei Chen <david.chen@nutanix.com>
Closes#16854
When vdev first sees some block cloning, there is a window when
brt_maybe_exists() might already return true since something was
cloned, but bv_mos_entries is still 0 since BRT ZAP was not yet
created. In such case we should not try to look into the ZAP
and dereference NULL bv_mos_entries_dnode.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16851
cstyle can handle these cases now, so we don't need to disable it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16840
- Instead of copying one ashift-sized block per ZIO, copy as much
as we have contiguous data up to 16MB per old vdev. To avoid data
moves use gang ABDs, so that read ZIOs can directly fill buffers
for write ZIOs. ABDs have much smaller overhead than ZIOs in both
memory usage and processing time, plus big I/Os do not depend on
I/O aggregation and scheduling to reach decent performance on HDDs.
- Reduce raidz_expand_max_copy_bytes to 16MB on 32bit platforms.
- Use 32bit range tree when possible (practically always now) to
slightly reduce memory usage.
- Use ZIO_PRIORITY_REMOVAL for early stages of expansion, same as
for main ones.
- Fix rate overflows in `zpool status` reporting.
With these changes expanding RAIDZ1 from 4 to 5 children I am able
to reach 6-12GB/s rate on SSDs and ~500MB/s on HDDs, both are
limited by devices instead of CPU.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15680Closes#16819
Same as writes block cloning can increase block size and number of
indirection levels. That means it can dirty block 0 at level 0 or
at new top indirection level without explicitly holding them.
A block cloning test case for large offsets has been added.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16825
- Issue prescient prefetches for demand indirect blocks after the
first one. It should be quite rare for reads/writes, but much more
useful for cloning due to much bigger (up to 1022 blocks) accesses.
It covers the gap during the first couple accesses when we can not
speculate yet, but we know what is needed right now. It reduces
dbuf_hold() sync read delays in dmu_buf_hold_array_by_dnode().
- Increase maximum prefetch distance for indirect blocks from 64
to 128MB. It should cover the maximum 1022 blocks of block cloning
access size in case of default 128KB recordsize used. In case of
bigger recordsize the above prescient prefetch should also help.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16814
In some cases like dsl_dataset_hold_obj() it is possible to handle
those errors, so failure to hold dataset should be better than
kernel panic. Some other places where these errors are still not
handled but asserted should be less dangerous just as unreachable.
We have a user report about pool corruption leading to assertions
on these errors. Hopefully this will make behavior a bit nicer.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16836
The pages in the array may become valid after this initial unbusying,
so the assertion only holds during the first iteration of the outer
loop.
Later in zfs_getpages(), the dmu_read_pages() loop handles already-valid
pages. Just drop the assertion, it's not terribly useful.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reported-by: Peter Holm <pho@FreeBSD.org>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Sponsored-by: Klara, Inc.
Closes#16810Closes#16834
Some users might want to scrub only new data because they would like
to know if the new write wasn't corrupted. This PR adds possibility
scrub only newly written data.
This introduces new `last_scrubbed_txg` property, indicating the
transaction group (TXG) up to which the most recent scrub operation
has checked and repaired the dataset, so users can run scrub only
from the last saved point. We use a scn_max_txg and scn_min_txg
which are already built into scrub, to accomplish that.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Sponsored-By: Wasabi Technology, Inc.
Sponsored-By: Klara Inc.
Closes#16301
Should make no difference, just some dead code cleanup.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Martin Matuska <mm@FreeBSD.org>
Signed-off-by:Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16808
Direct I/O implementation added condition to call dbuf_undirty()
only in case of block cloning. But the condition is not right if
the block is no longer dirty in this TXG, but still in DB_NOFILL
state. It resulted in block not reverting to DB_UNCACHED and
following NULL de-reference on attempt to access absent db_data.
While there, add assertions for db_data to make debugging easier.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16829
The intent here is to replace the zero page pointer in the array of
pointers to pages in the struct.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Closes#16812Closes#16689Closes#16642
This allowed to debug #16714, fixed in #16782. Without assertions
added here it is difficult to figure out what logs cause the problem,
since the assertion happens in sync thread context.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Co-authored-by: Alexander Motin <mav@FreeBSD.org>
Closes#16795
Linux locks copy_file_range() source as shared. FreeBSD was doing
it also, but then was changed to exclusive, partially because KPI
of that time was doing so, and partially seems out of caution.
Considering zfs_clone_range() uses range locks on both source and
destination, neither should require exclusive vnode locks. But one
step at a time, just sync it with Linux for now.
Reviewed-by: Alan Somers <asomers@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16789Closes#16797
Previously vnode was not locked there, unlike Linux. It required
locking it in vn_flush_cached_data(), which recursed on the lock
if called from zfs_clone_range(), having the vnode locked.
Reviewed-by: Alan Somers <asomers@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16789Closes#16796
by protecting against sb->s_shrink eviction on umount with newer kernels
deactivate_locked_super calls shrinker_free and only then
sops->kill_sb cb, resulting in UAF on umount when trying
to reach for the shrinker functions in zpl_prune_sb of
in-umount dataset
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam Moss <c@yotes.com>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Closes#16770
This fixes assertion in brt_sync_table() on debug builds when last
cloned block on the vdev is freed and bv_meta_dirty is cleared,
while bv_entcount_dirty is not. Should not matter in production.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16791
- With both pending and current AVL-trees being per-vdev and having
effectively identical comparison functions (pending tree compared
also birth time, but I don't believe it is possible for them to be
different for the same offset within one transaction group), it
makes no sense to move entries from one to another. Instead inline
dramatically simplified brt_entry_addref() into brt_pending_apply().
It no longer requires bv_lock, since there is nothing concurrent
to it at the time. And it does not need to search the tree for the
previous entries, since it is the same tree, we already have the
entry and we know it is unique.
- Put brt_vdev_lookup() and brt_vdev_addref() into different tree
traversals to avoid false positives in the first due to the second
entcount modifications. It saves dramatic amount of time when a
file cloned first time by not looking for non-existent ZAP entries.
- Remove avl_is_empty(bv_tree) check from brt_maybe_exists(). I
don't think it is needed, since by the time all added entries are
already accounted in bv_entcount. The extra check must be producing
too many false positives for no reason. Also we don't need bv_lock
there, since bv_entcount pointer must be table at this point, and
we don't care about false positive races here, while false negative
should be impossible, since all brt_vdev_addref() have already
completed by this point. This dramatically reduces lock contention
on massive deletes of cloned blocks. The only remaining one is
between multiple parallel free threads calling brt_entry_decref().
- Do not update ZAP if net change for a block over the TXG was 0.
In combination with above it makes file move between datasets as
cheap operation as originally intended if it fits into one TXG.
- Do not allocate vdevs on pool creation or import if it did not
have active block cloning. This allows to save a bit in few cases.
- While here, add proper error handling in brt_load() on pool
import instead of assertions.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16773
While block cloning operation from the beginning was made per-vdev,
before this change most of its data were protected by two pool-
wide locks. It created lots of lock contention in many workload.
This change makes most of block cloning data structures per-vdev,
which allows to lock them separately. The only pool-wide lock now
it spa_brt_lock, protecting array of per-vdev pointers and in most
cases taken as reader. Also this splits per-vdev locks into three
different ones: bv_pending_lock protects the AVL-tree of pending
operations in open context, bv_mos_entries_lock protects BRT ZAP
object from while being prefetched, and bv_lock protects the rest
of per-vdev context during TXG commit process. There should be
no functional difference aside of some optimizations.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pawel Jakub Dawidek <pjd@FreeBSD.org>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16740
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pawel Jakub Dawidek <pjd@FreeBSD.org>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16740
We are doing exactly the same checks around all brt_pending_add().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pawel Jakub Dawidek <pjd@FreeBSD.org>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16740
zio_delay_interrupt(), apparently used for fault injection, is executed
in the I/O pipeline. It can cause the calling thread to go to sleep,
which is not allowed on FreeBSD. This happens only for small delays,
though, and there's no apparent reason to avoid deferring to a taskqueue
in that case, as it already does otherwise.
Simply go to sleep unconditionally. This fixes an occasional panic I
see when running the ZTS on FreeBSD. Also remove an unhelpful comment
referencing the non-existent timeout_generic().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#16785
Without doing that there is a race window on export when history
log write by completed rebuild dirties transaction beyond final,
triggering assertion.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16714Closes#16782
Those values require global atomics to get current hash_elements
values in few of the hottest code paths, while in all the years I
never cared about it. If somebody wants, it should be easy to
get it by periodic sampling, since neither ARC header nor DBUF
counts change so fast that it would be difficult to catch.
For now I've left hash_elements_max kstat for ARC, since it was
used/reported by arc_summary and it would break older versions,
but now it just reports the current value.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16759
Compression names actually aren't used in dedup table names, but
checksum names are.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16776
Since zvol read and write can process up to (DMU_MAX_ACCESS / 2) bytes
in a single operation, the current optimal I/O size is too low. SCST
directly reports this value as the optimal transfer length for the
target SCSI device. Increasing it from the previous volblocksize results
in performance improvement for large block parallel I/O workloads.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#16750
- If we don't want dmu_read_pages() to perform extra readahead/behind,
pass a pointer to 0 instead of a null pointer, as dum_read_pages()
expects rahead and rbehind to be non-null.
- Avoid unneeded iterations in a loop.
Sponsored-by: Klara, Inc.
Reported-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#16758
dsl_free() calls zio_free() to free the block. For most blocks, this
simply calls metaslab_free() without doing any IO or putting anything on
the IO pipeline.
Some blocks however require additional IO to free. This at least
includes gang, dedup and cloned blocks. For those, zio_free() will issue
a ZIO_TYPE_FREE IO and return.
If a huge number of blocks are being freed all at once, it's possible
for dsl_dataset_block_kill() to be called millions of time on a single
transaction (eg a 2T object of 128K blocks is 16M blocks). If those are
all IO-inducing frees, that then becomes 16M FREE IOs placed on the
pipeline. At time of writing, a zio_t is 1280 bytes, so for just one 2T
object that requires a 20G allocation of resident memory from the
zio_cache. If that can't be satisfied by the kernel, an out-of-memory
condition is raised.
This would be better handled by improving the cases that the
dmu_tx_assign() throttle will handle, or by reducing the overheads
required by the IO pipeline, or with a better central facility for
freeing blocks.
For now, we simply check for the cases that would cause zio_free() to
create a FREE IO, and instead put the block on the pool's freelist. This
is the same place that blocks from destroyed datasets go, and the async
destroy machinery will automatically see them and trickle them out as
normal.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#6783Closes#16708Closes#16722Closes#16697
..., before we make the header or the log block visible to others.
It should fix assertion on allocated space going negative if the
header is freed once the lock is dropped, while the write is still
going.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16040Closes#16743
As a deadlock avoidance measure, zfs_getpages() would only try to
acquire a rangelock, falling back to a single-page read if this was not
possible. However, this is incompatible with direct I/O.
Instead, release the busy lock before trying to acquire the rangelock in
blocking mode. This means that it's possible for the page to be
replaced, so we have to re-lookup.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#16643
mappedread_sf() may allocate pages; if it fails to populate a page
can't free it, it needs to ensure that it's placed into a page queue,
otherwise it can't be reclaimed until the vnode is destroyed.
I think this is quite unlikely to happen in practice, it was noticed by
code inspection.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#16643
When building on musl, we get:
```
In file included from tests/zfs-tests/cmd/getversion.c:22:
/usr/include/sys/fcntl.h:1:2: error: #warning redirecting incorrect
#include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
In file included from module/os/linux/zfs/vdev_file.c:36:
/usr/include/sys/fcntl.h:1:2: error: #warning redirecting incorrect
#include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
```
Bug: https://bugs.gentoo.org/925235
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sam James <sam@gentoo.org>
Closes#15925
a10e552 updated abd_free_linear_page() to no longer call
abd_update_scatter_stat(). This meant that linear pages that were not
attached to Direct I/O requests were not doing waste accounting for the
ARC. This led to performance issues due to incorrect ARC accounting that
resulted in 100% of CPU time being spent in arc_evict() during prolonged
I/O workloads with the ARC.
The call to abd_update_scatter_stats() is now conditionally called in
abd_free_linear_page() when the ABD is not from a Direct I/O request.
Reviewed-by: Mark Maybee <mmaybee@delphix.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16729
Currently, even though send_reader_thread prefetches spill block,
do_dump() will not use it and issues its own blocking arc_read. This
causes significant performance degradation when sending datasets with
lots of spill blocks.
For unmodified spill blocks, we also create send_range struct for them
in send_reader_thread and issue prefetches for them. We piggyback them
on the dnode send_range instead of enqueueing them so we don't break
send_range_after check.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Co-authored-by: david.chen <david.chen@nutanix.com>
Closes#16701
Avoids using fallback_migrate_folio, which starts unnecessary writeback
(leading to BUG in migrate_folio_extra).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: tstabrawa <59430211+tstabrawa@users.noreply.github.com>
Closes#16568Closes#16723
This reverts commit b052035990.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: tstabrawa <59430211+tstabrawa@users.noreply.github.com>
Closes#16568Closes#16723
Small block workloads may use a very large number of dirty records.
During simple block cloning test due to BRT still using 4KB blocks
I can easily see up to 2.5M of those used. Before this change
dbuf_dirty_record_t structures representing them were allocated via
kmem_zalloc(), that rounded their size up to 512 bytes.
Introduction of specialized kmem cache allows to reduce the size
from 512 to 408 bytes. Additionally, since override and raw params
in dirty records are mutually exclusive, puting them into a union
allows to reduce structure size down to 368 bytes, increasing the
saving to 28%, that can be a 0.5GB or more of RAM.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16694
I think we've done enough experiments.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16189Closes#16712
Freeing an ABD can take sleeping locks to update various stats. We
aren't allowed to sleep on an interrupt handler. So, move the free off
to the io_done callback.
We should never have been freeing things in the interrupt handler, but
we got away with it because we were usually freeing a linear ABD, which
at most is returning two objects to a cache and never sleeping. Scatter
ABDs can be used now, and those have more complex locking.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16687
It seems out our notion of "properly" aligned IO was incomplete. In
particular, dm-crypt does its own splitting, and assumes that a logical
block will never cross an order-0 page boundary (ie, the physical page
size, not compound size). This effectively means that it needs to be
possible to split a BIO at any page or block size boundary and have it
work correctly.
This updates the alignment check function to enforce these rules (to the
extent possible).
Our response to misaligned data is to make some new allocation that is
properly aligned, and copy the data into it. It turns out that
linearising (via abd_borrow_buf()) is not enough, because we allocate eg
4K blocks from a general purpose slab, and so may receive (or already
have) a 4K block that crosses pages.
So instead, we allocate a new ABD, which is guaranteed to be aligned
properly to block sizes, and then copy everything into it, and back out
on the way back.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16687#16631#15646#15533#14533
