Timur Tabi a93ad944f4 net: qcom/emac: specify the correct size when mapping a DMA buffer ... When mapping the RX DMA buffers, the driver was accidentally specifying zero for the buffer length. Under normal circumstances, SWIOTLB does not need to allocate a bounce buffer, so the address is just mapped without checking the size field. This is why the error was not detected earlier. Fixes: b9b17debc6 ("net: emac: emac gigabit ethernet controller driver") Cc: stable@vger.kernel.org Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>		2017-09-25 16:34:29 -07:00
..
emac	net: qcom/emac: specify the correct size when mapping a DMA buffer	2017-09-25 16:34:29 -07:00
rmnet	net: qualcomm: rmnet: Fix rcu splat in rmnet_is_real_dev_registered	2017-09-23 19:59:53 -07:00
Kconfig	drivers: net: ethernet: qualcomm: rmnet: Initial implementation	2017-08-30 11:41:13 -07:00
Makefile	drivers: net: ethernet: qualcomm: rmnet: Initial implementation	2017-08-30 11:41:13 -07:00
qca_7k_common.c	net: qualcomm: make qca_7k_common a separate kernel module	2017-05-30 13:57:30 -04:00
qca_7k_common.h	net: qualcomm: add QCA7000 UART driver	2017-05-30 13:57:32 -04:00
qca_7k.c	net: qualcomm: move qcaspi_tx_cmd to qca_spi.c	2017-05-30 13:57:29 -04:00
qca_7k.h	net: qualcomm: move qcaspi_tx_cmd to qca_spi.c	2017-05-30 13:57:29 -04:00
qca_debug.c	net: qualcomm: use net_device_ops instead of direct call	2017-05-30 13:57:28 -04:00
qca_debug.h
qca_spi.c	networking: use skb_put_zero()	2017-06-13 13:54:03 -04:00
qca_spi.h	net: qualcomm: rename qca_framing.c to qca_7k_common.c	2017-05-30 13:57:30 -04:00
qca_uart.c	net: qualcomm: add QCA7000 UART driver	2017-05-30 13:57:32 -04:00