Johan Hovold d0e1df9cf4 net: phy: micrel: use generic config_init for KSZ8021/KSZ8031 ... Use generic config_init callback also for KSZ8021 and KSZ8031. This has been avoided this far due to commit b838b4aced ("phy/micrel: KSZ8031RNL RMII clock reconfiguration bug"), which claims that the PHY becomes unresponsive if the broadcast-disable flag is set before configuring the clock mode. Turns out that the problem seemingly worked-around by the above mentioned commit was really due to a hardware-configuration issue, where the PHY was in fact strapped to address 3 rather than 0. Tested-by: Bruno Thomsen <bth@kamstrup.dk> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>		2014-12-26 16:19:50 -05:00
..
amd-xgbe-phy.c
amd.c
at803x.c
bcm7xxx.c	net: phy: bcm7xxx: add an explicit version check for GPHY rev G0	2014-12-08 21:33:29 -05:00
bcm63xx.c
bcm87xx.c
broadcom.c
cicada.c
davicom.c
dp83640_reg.h
dp83640.c	net: ptp: fix time stamp matching logic for VLAN packets.	2014-11-12 15:06:17 -05:00
et1011c.c
fixed_phy.c	net: Allow FIXED_PHY to be modular.	2014-12-16 15:02:23 -05:00
icplus.c
Kconfig	net: Allow FIXED_PHY to be modular.	2014-12-16 15:02:23 -05:00
lxt.c
Makefile	net: Allow FIXED_PHY to be modular.	2014-12-16 15:02:23 -05:00
marvell.c
mdio_bus.c
mdio-bcm-unimac.c
mdio-bitbang.c
mdio-gpio.c
mdio-moxart.c
mdio-mux-gpio.c	Driver core patches for 3.19-rc1	2014-12-14 16:10:09 -08:00
mdio-mux-mmioreg.c
mdio-mux.c
mdio-octeon.c
mdio-sun4i.c
micrel.c	net: phy: micrel: use generic config_init for KSZ8021/KSZ8031	2014-12-26 16:19:50 -05:00
national.c
phy_device.c
phy.c
qsemi.c
realtek.c
smsc.c
spi_ks8995.c
ste10Xp.c
vitesse.c