mirror_ubuntu-kernels/arch/x86/xen/xen-head.S
Peter Zijlstra 5b2fc51576 x86/ibt,xen: Sprinkle the ENDBR
Even though Xen currently doesn't advertise IBT, prepare for when it
will eventually do so and sprinkle the ENDBR dust accordingly.

Even though most of the entry points are IRET like, the CPL0
Hypervisor can set WAIT-FOR-ENDBR and demand ENDBR at these sites.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.873919996@infradead.org
2022-03-15 10:32:35 +01:00

119 lines
3.2 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0 */
/* Xen-specific pieces of head.S, intended to be included in the right
place in head.S */
#ifdef CONFIG_XEN
#include <linux/elfnote.h>
#include <linux/init.h>
#include <asm/boot.h>
#include <asm/asm.h>
#include <asm/msr.h>
#include <asm/page_types.h>
#include <asm/percpu.h>
#include <asm/unwind_hints.h>
#include <xen/interface/elfnote.h>
#include <xen/interface/features.h>
#include <xen/interface/xen.h>
#include <xen/interface/xen-mca.h>
#include <asm/xen/interface.h>
.pushsection .noinstr.text, "ax"
.balign PAGE_SIZE
SYM_CODE_START(hypercall_page)
.rept (PAGE_SIZE / 32)
UNWIND_HINT_FUNC
ANNOTATE_NOENDBR
ret
/*
* Xen will write the hypercall page, and sort out ENDBR.
*/
.skip 31, 0xcc
.endr
#define HYPERCALL(n) \
.equ xen_hypercall_##n, hypercall_page + __HYPERVISOR_##n * 32; \
.type xen_hypercall_##n, @function; .size xen_hypercall_##n, 32
#include <asm/xen-hypercalls.h>
#undef HYPERCALL
SYM_CODE_END(hypercall_page)
.popsection
#ifdef CONFIG_XEN_PV
__INIT
SYM_CODE_START(startup_xen)
UNWIND_HINT_EMPTY
cld
/* Clear .bss */
xor %eax,%eax
mov $__bss_start, %rdi
mov $__bss_stop, %rcx
sub %rdi, %rcx
shr $3, %rcx
rep stosq
mov %rsi, xen_start_info
mov initial_stack(%rip), %rsp
/* Set up %gs.
*
* The base of %gs always points to fixed_percpu_data. If the
* stack protector canary is enabled, it is located at %gs:40.
* Note that, on SMP, the boot cpu uses init data section until
* the per cpu areas are set up.
*/
movl $MSR_GS_BASE,%ecx
movq $INIT_PER_CPU_VAR(fixed_percpu_data),%rax
cdq
wrmsr
call xen_start_kernel
SYM_CODE_END(startup_xen)
__FINIT
#ifdef CONFIG_XEN_PV_SMP
.pushsection .text
SYM_CODE_START(asm_cpu_bringup_and_idle)
UNWIND_HINT_EMPTY
ENDBR
call cpu_bringup_and_idle
SYM_CODE_END(asm_cpu_bringup_and_idle)
.popsection
#endif
#endif
ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS, .asciz "linux")
ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION, .asciz "2.6")
ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION, .asciz "xen-3.0")
#ifdef CONFIG_X86_32
ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE, _ASM_PTR __PAGE_OFFSET)
#else
ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE, _ASM_PTR __START_KERNEL_map)
/* Map the p2m table to a 512GB-aligned user address. */
ELFNOTE(Xen, XEN_ELFNOTE_INIT_P2M, .quad (PUD_SIZE * PTRS_PER_PUD))
#endif
#ifdef CONFIG_XEN_PV
ELFNOTE(Xen, XEN_ELFNOTE_ENTRY, _ASM_PTR startup_xen)
#endif
ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, _ASM_PTR hypercall_page)
ELFNOTE(Xen, XEN_ELFNOTE_FEATURES,
.ascii "!writable_page_tables|pae_pgdir_above_4gb")
ELFNOTE(Xen, XEN_ELFNOTE_SUPPORTED_FEATURES,
.long (1 << XENFEAT_writable_page_tables) | \
(1 << XENFEAT_dom0) | \
(1 << XENFEAT_linux_rsdp_unrestricted))
ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes")
ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic")
ELFNOTE(Xen, XEN_ELFNOTE_L1_MFN_VALID,
.quad _PAGE_PRESENT; .quad _PAGE_PRESENT)
ELFNOTE(Xen, XEN_ELFNOTE_SUSPEND_CANCEL, .long 1)
ELFNOTE(Xen, XEN_ELFNOTE_MOD_START_PFN, .long 1)
ELFNOTE(Xen, XEN_ELFNOTE_HV_START_LOW, _ASM_PTR __HYPERVISOR_VIRT_START)
ELFNOTE(Xen, XEN_ELFNOTE_PADDR_OFFSET, _ASM_PTR 0)
#endif /*CONFIG_XEN */