Florian Fainelli b2f2af21e3 net: dsa: allow enabling and disable switch ports ... Whenever a per-port network device is used/unused, invoke the switch driver port_enable/port_disable callbacks to allow saving as much power as possible by disabling unused parts of the switch (RX/TX logic, memory arrays, PHYs...). We supply a PHY device argument to make sure the switch driver can act on the PHY device if needed (like putting/taking the PHY out of deep low power mode). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2014-09-28 17:14:08 -04:00
..
dsa_priv.h	net: dsa: allow switch drivers to implement suspend/resume hooks	2014-09-22 14:41:23 -04:00
dsa.c	net: dsa: allow switch drivers to implement suspend/resume hooks	2014-09-22 14:41:23 -04:00
Kconfig	net: dsa: add Broadcom tag RX/TX handler	2014-08-27 22:59:40 -07:00
Makefile	net: dsa: add Broadcom tag RX/TX handler	2014-08-27 22:59:40 -07:00
slave.c	net: dsa: allow enabling and disable switch ports	2014-09-28 17:14:08 -04:00
tag_brcm.c	dsa: Split ops up, and avoid assigning tag_protocol and receive separately	2014-09-15 17:24:20 -04:00
tag_dsa.c	dsa: Split ops up, and avoid assigning tag_protocol and receive separately	2014-09-15 17:24:20 -04:00
tag_edsa.c	dsa: Split ops up, and avoid assigning tag_protocol and receive separately	2014-09-15 17:24:20 -04:00
tag_trailer.c	dsa: Split ops up, and avoid assigning tag_protocol and receive separately	2014-09-15 17:24:20 -04:00