mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2025-12-26 06:52:42 +00:00
7c0bc65c84
Along with the headline feature of 5 new drivers, we have the
substantial addition of auxilliary sensor support on the lsm6sdx
parts for ST. There has also been a good set of staging cleanup
in this period with more underway.
An ever increasing number of devices supported with just a new
ID which is a good sign that at least some manufacturers are
continuing to stabilise their interfaces.
New device support,
* ad7124
- New driver supporting Analog Devices' ad7124-4 and ad7124-8 parts
with the inevitable DT binding.
* ad7949
- New driver supporting Analog Devices' ad7949, AD7682 and AD7689 ADCs.
* rm3100
- New driver supporting PNIs RM3100 magnometer with bindings and
vendor prefix.
* ti-dac7311
- New driver supporting DAC7311, DAC6311 and DAC5311 TI DACs, with
DT bindings.
* vcnl5035
- New driver supporting the light sensor part of the VCNL4035, with
DT bindings
Features,
* bindings
- Add a generic ADC channel binding as we keep reinventing this
wheel.
* adc128s052
- Add IDs for additional pin compatible parts.
- Add APCI ID seen on E3940 UP squared boards.
* ad_sigma_delta
- Allow for custom data register overiding default.
* kxcjk1013
- Add KIOX0009 ACPI ID as seen on the Acer One 10.
* lsm6dsx
- Rework leading to...
- External sensor support using the built in I2C master.
- Initial support for a slave lis2mdl magnetometer.
* meson-saradc
- Add temperature sensor support and bindings.
* st_magn
- New ID for lsm9dsl_magn with bindings
- New ID for lis3de accelerometer
* tpl0102
- Add supprot for IIO_AVAIL_RANGE to report the range available
from this device to userspace and in kernel users.
Cleanups and minor fixes
* tools
- Allow outside specification of CFLAGS
* ad2s90
- Handle and spi_read error.
- Handle spi_setup failure
- Drop a pointless assignment.
- Prevent a potentail race by moving device registration to after
all other setup.
- Add missing scale attribute.
- Add a sanity check on channel type before trying to read it.
* ad2s1210
- Move to modern gpio descriptors.
- Drop a gpioin flag which made no sense as far as we can tell.
- Add dt table (bindings doc to follow when this is ready for
moving out of staging).
* ad5933
- Drop camel-case naming of ext_clk_hz.
- White space fixes.
* ad7150
- Local variable to shorten overly long line.
- Alignment and line break fixes.
* ad7280a
- Handle an error path that was previously ignored.
- Use crc8.h to build the crc table replacing custom code.
- Avoid unecessary cast.
- Power down the device if an error happens in probe
- Use devm routines to simplify probe and remove.
* ad7606
- Alignment fixes.
* ad7780
- This worked as long as by coincidence an uninitialized value
was 0. Lets not rely on that.
- Ensure gain update is only used with the ad778x chips that
actually support it.
- Tidy up pattern mask generation.
- Read regulator when scale is requested (which should be infrequent)
as it might have changed from initialization.
* ad7816
- Move to modern gpio descriptors
- Don't use a busy_pin for ad7818 as there isn't one.
- Ensure RD/WR and CONVST pins are outputs (previously they
were brought up as inputs which doesn't seem to make any sense)
- DT id table.
* adc128s052
- SPDX
* adt7316
- Alignment fix.
- Fix data reading. When using I2C the driver never actually
used the value read. This has been broken a very long time
hence no rush to fix it now + the driver is undergoing a lot
of cleanup.
- Sanity check that the i2c read didn't fail to actually read
anything.
* dpot-dac
- Mark a switch full through with slightly different text so that
gcc doesn't warn on it.
* gyro-adc
- Fix a wrong file in the MAINTAINERS entry and add binding doc to the
listed files.
* ina2xx
- Add some early returns to clarify error paths in switch.
* lsm6dsx
- MAINTAINERS entry.
* max11100
- SPDX
* max9611
- SPDX
* mcp4131
- use of_device_get_match_data in preference to spi_get_device_id
approach.
* rcar-adc
- SPDX
* sc27xx
- Add ADC conversion timeout support to avoid possible fault.
* ssp_sensors
- Don't free managed resources manually.
* st-magn
- Add a comment to avoid future confusion over when to use -magn
postfix (on multi chip in package parts)
- Add BDU register for LIS3MDL where it seems to have been missed.
* st-sensors
- Minor spelling, grammar etc fixes.
* tpl0102
- Use a pointer rather than an index of an array to improve conciseness.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlv1wDARHGppYzIzQGtl
cm5lbC5vcmcACgkQVIU0mcT0Fohf9Q//fzNk9RoY98awaEmHRW7PLnHe1WKyQTV5
M13EaFwm/NeWfT1kaNd/heZDnwucB34ONrcueNcM8MfwzPwWaL9UvSqEnSWIuTae
hKdn/BMTfy168xhu95YPjHw4X42HwcXYlHL9XFsA0WERgaWsQu2EwIy1/3XRgIrt
QPQVyJNUkLZmBuGcd2UhxzdTiLuh/hs7FFBg037hxaR77slWYKqAzwVa6eyz/jvo
tRT9RE50O1FT3eDkBSw91nkamFcmFyyA2j4HQ33Aitjs5O1ML95xEJ0tMAznZfKn
zAGCCUJjFYBvWPOpQ8xBA3tplFRGIyVhPJ5ZU+B2vZcxVXQ3IFZNqKRXfrUkAXpf
PK2+05+HjHk1g7Ms1Tj4lF5AtP/nEQ8dvmGk6/nDU7Gt4Ytrpb0DhAuMGmN4S5ih
zwwh+c6fLGCMz7KE8AoegOn3WF/FW1ZppTRjOWgqt7OP6lgoChPuTV5HGzxiZgr+
MzY/fytbXTnmfTL1ZvZYPdOSjkHcS9+8rwu1Jirmb1Y5Qt3qpNAUsdsnt965mQaE
bHmuqw8QJN31goTEsqvjnsFhH57dJ1HbmG0MSrF8XB0bQB5Xzbkd+RV4fls1J+SG
XwpIzQLhPxF5da6G+I/SIgLX6nASacJp9hHEN/ZuM3IKr2UW8FCpCH6JmyX0i6OU
dPjHsXrGTuI=
=78Y3
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 4.21 cycle
Along with the headline feature of 5 new drivers, we have the
substantial addition of auxilliary sensor support on the lsm6sdx
parts for ST. There has also been a good set of staging cleanup
in this period with more underway.
An ever increasing number of devices supported with just a new
ID which is a good sign that at least some manufacturers are
continuing to stabilise their interfaces.
New device support,
* ad7124
- New driver supporting Analog Devices' ad7124-4 and ad7124-8 parts
with the inevitable DT binding.
* ad7949
- New driver supporting Analog Devices' ad7949, AD7682 and AD7689 ADCs.
* rm3100
- New driver supporting PNIs RM3100 magnometer with bindings and
vendor prefix.
* ti-dac7311
- New driver supporting DAC7311, DAC6311 and DAC5311 TI DACs, with
DT bindings.
* vcnl5035
- New driver supporting the light sensor part of the VCNL4035, with
DT bindings
Features,
* bindings
- Add a generic ADC channel binding as we keep reinventing this
wheel.
* adc128s052
- Add IDs for additional pin compatible parts.
- Add APCI ID seen on E3940 UP squared boards.
* ad_sigma_delta
- Allow for custom data register overiding default.
* kxcjk1013
- Add KIOX0009 ACPI ID as seen on the Acer One 10.
* lsm6dsx
- Rework leading to...
- External sensor support using the built in I2C master.
- Initial support for a slave lis2mdl magnetometer.
* meson-saradc
- Add temperature sensor support and bindings.
* st_magn
- New ID for lsm9dsl_magn with bindings
- New ID for lis3de accelerometer
* tpl0102
- Add supprot for IIO_AVAIL_RANGE to report the range available
from this device to userspace and in kernel users.
Cleanups and minor fixes
* tools
- Allow outside specification of CFLAGS
* ad2s90
- Handle and spi_read error.
- Handle spi_setup failure
- Drop a pointless assignment.
- Prevent a potentail race by moving device registration to after
all other setup.
- Add missing scale attribute.
- Add a sanity check on channel type before trying to read it.
* ad2s1210
- Move to modern gpio descriptors.
- Drop a gpioin flag which made no sense as far as we can tell.
- Add dt table (bindings doc to follow when this is ready for
moving out of staging).
* ad5933
- Drop camel-case naming of ext_clk_hz.
- White space fixes.
* ad7150
- Local variable to shorten overly long line.
- Alignment and line break fixes.
* ad7280a
- Handle an error path that was previously ignored.
- Use crc8.h to build the crc table replacing custom code.
- Avoid unecessary cast.
- Power down the device if an error happens in probe
- Use devm routines to simplify probe and remove.
* ad7606
- Alignment fixes.
* ad7780
- This worked as long as by coincidence an uninitialized value
was 0. Lets not rely on that.
- Ensure gain update is only used with the ad778x chips that
actually support it.
- Tidy up pattern mask generation.
- Read regulator when scale is requested (which should be infrequent)
as it might have changed from initialization.
* ad7816
- Move to modern gpio descriptors
- Don't use a busy_pin for ad7818 as there isn't one.
- Ensure RD/WR and CONVST pins are outputs (previously they
were brought up as inputs which doesn't seem to make any sense)
- DT id table.
* adc128s052
- SPDX
* adt7316
- Alignment fix.
- Fix data reading. When using I2C the driver never actually
used the value read. This has been broken a very long time
hence no rush to fix it now + the driver is undergoing a lot
of cleanup.
- Sanity check that the i2c read didn't fail to actually read
anything.
* dpot-dac
- Mark a switch full through with slightly different text so that
gcc doesn't warn on it.
* gyro-adc
- Fix a wrong file in the MAINTAINERS entry and add binding doc to the
listed files.
* ina2xx
- Add some early returns to clarify error paths in switch.
* lsm6dsx
- MAINTAINERS entry.
* max11100
- SPDX
* max9611
- SPDX
* mcp4131
- use of_device_get_match_data in preference to spi_get_device_id
approach.
* rcar-adc
- SPDX
* sc27xx
- Add ADC conversion timeout support to avoid possible fault.
* ssp_sensors
- Don't free managed resources manually.
* st-magn
- Add a comment to avoid future confusion over when to use -magn
postfix (on multi chip in package parts)
- Add BDU register for LIS3MDL where it seems to have been missed.
* st-sensors
- Minor spelling, grammar etc fixes.
* tpl0102
- Use a pointer rather than an index of an array to improve conciseness.
* tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (80 commits)
Staging: iio: adt7316: Add an extra check for 'ret' equals to 0
Staging: iio: adt7316: Fix i2c data reading, set the data field
dt-bindings: iio: adc: Add docs for ad7124
iio: adc: Add ad7124 support
dt-bindings: iio: adc: Add common ADCs properties to a separate file
iio: ad_sigma_delta: Allow to provide custom data register address
staging: iio: ad7816: Add device tree table.
iio: imu: st_lsm6dsx: add entry in MAINTAINERS file
iio: potentiometer: mcp4131: use of_device_get_match_data()
staging: iio: adc: ad7280a: use devm_* APIs
staging: iio: adc: ad7280a: power down the device on error in probe
dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors
iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller
iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine
iio: imu: st_lsm6dsx: add i2c embedded controller support
iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine
iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids
iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark
iio: imu: st_lsm6dsx: reload trimming parameter at bootstrap
iio: imu: st_lsm6dsx: introduce locked read/write utility routines
...
|
||
|---|---|---|
| .. | ||
| jz4740 | ||
| media | ||
| txx9 | ||
| x86 | ||
| ad5449.h | ||
| ad5755.h | ||
| ad5761.h | ||
| ad7266.h | ||
| ad7291.h | ||
| ad7298.h | ||
| ad7303.h | ||
| ad7791.h | ||
| ad7793.h | ||
| ad7879.h | ||
| ad7887.h | ||
| adau17x1.h | ||
| adau1977.h | ||
| adp5588.h | ||
| adp8860.h | ||
| adp8870.h | ||
| ads1015.h | ||
| ads7828.h | ||
| ams-delta-fiq.h | ||
| apds990x.h | ||
| arm-ux500-pm.h | ||
| asoc-imx-ssi.h | ||
| asoc-kirkwood.h | ||
| asoc-mx27vis.h | ||
| asoc-palm27x.h | ||
| asoc-s3c24xx_simtec.h | ||
| asoc-s3c.h | ||
| asoc-ti-mcbsp.h | ||
| asoc-ux500-msp.h | ||
| at24.h | ||
| at91_adc.h | ||
| ata-pxa.h | ||
| ata-samsung_cf.h | ||
| atmel.h | ||
| b53.h | ||
| bcmgenet.h | ||
| bd6107.h | ||
| bh1770glc.h | ||
| brcmfmac.h | ||
| clk-da8xx-cfgchip.h | ||
| clk-davinci-pll.h | ||
| clk-integrator.h | ||
| clk-lpss.h | ||
| clk-st.h | ||
| clk-u300.h | ||
| cpuidle-exynos.h | ||
| crypto-atmel.h | ||
| crypto-ux500.h | ||
| cyttsp4.h | ||
| davinci_asp.h | ||
| db8500_thermal.h | ||
| dma-atmel.h | ||
| dma-coh901318.h | ||
| dma-dw.h | ||
| dma-ep93xx.h | ||
| dma-hsu.h | ||
| dma-imx-sdma.h | ||
| dma-imx.h | ||
| dma-mcf-edma.h | ||
| dma-mmp_tdma.h | ||
| dma-mv_xor.h | ||
| dma-s3c24xx.h | ||
| dma-ste-dma40.h | ||
| dmtimer-omap.h | ||
| ds620.h | ||
| dwc3-omap.h | ||
| edma.h | ||
| efm32-spi.h | ||
| efm32-uart.h | ||
| ehci-sh.h | ||
| elm.h | ||
| emif_plat.h | ||
| eth-netx.h | ||
| fsa9480.h | ||
| g762.h | ||
| gpio_backlight.h | ||
| gpio-ath79.h | ||
| gpio-davinci.h | ||
| gpio-dwapb.h | ||
| gpio-htc-egpio.h | ||
| gpio-omap.h | ||
| gpmc-omap.h | ||
| hsmmc-omap.h | ||
| hwmon-s3c.h | ||
| i2c-cbus-gpio.h | ||
| i2c-davinci.h | ||
| i2c-designware.h | ||
| i2c-gpio.h | ||
| i2c-hid.h | ||
| i2c-imx.h | ||
| i2c-mux-gpio.h | ||
| i2c-mux-reg.h | ||
| i2c-ocores.h | ||
| i2c-omap.h | ||
| i2c-pca-platform.h | ||
| i2c-pxa.h | ||
| i2c-s3c2410.h | ||
| i2c-xiic.h | ||
| ina2xx.h | ||
| intel-mid_wdt.h | ||
| intel-spi.h | ||
| invensense_mpu6050.h | ||
| iommu-omap.h | ||
| irda-pxaficp.h | ||
| irda-sa11x0.h | ||
| isl9305.h | ||
| itco_wdt.h | ||
| keyboard-pxa930_rotary.h | ||
| keyboard-spear.h | ||
| keypad-ep93xx.h | ||
| keypad-nomadik-ske.h | ||
| keypad-omap.h | ||
| keypad-pxa27x.h | ||
| keypad-w90p910.h | ||
| keyscan-davinci.h | ||
| lcd-mipid.h | ||
| leds-kirkwood-netxbig.h | ||
| leds-kirkwood-ns2.h | ||
| leds-lm355x.h | ||
| leds-lm3642.h | ||
| leds-lp55xx.h | ||
| leds-omap.h | ||
| leds-pca963x.h | ||
| leds-s3c24xx.h | ||
| lm3630a_bl.h | ||
| lm3639_bl.h | ||
| lm8323.h | ||
| lp855x.h | ||
| lp8727.h | ||
| lp8755.h | ||
| ltc4245.h | ||
| lv5207lp.h | ||
| macb.h | ||
| max197.h | ||
| max732x.h | ||
| max3421-hcd.h | ||
| max6639.h | ||
| max6697.h | ||
| mcs.h | ||
| mdio-bcm-unimac.h | ||
| mfd-mcp-sa11x0.h | ||
| microchip-ksz.h | ||
| mlxreg.h | ||
| mmc-davinci.h | ||
| mmc-esdhc-imx.h | ||
| mmc-mxcmmc.h | ||
| mmc-omap.h | ||
| mmc-pxamci.h | ||
| mmc-s3cmci.h | ||
| mmc-sdhci-s3c.h | ||
| mmp_audio.h | ||
| mmp_dma.h | ||
| mouse-pxa930_trkball.h | ||
| mtd-davinci-aemif.h | ||
| mtd-davinci.h | ||
| mtd-mxc_nand.h | ||
| mtd-nand-omap2.h | ||
| mtd-nand-pxa3xx.h | ||
| mtd-nand-s3c2410.h | ||
| mtd-orion_nand.h | ||
| mv88e6xxx.h | ||
| mv_usb.h | ||
| net-cw1200.h | ||
| nfcmrvl.h | ||
| ntc_thermistor.h | ||
| nxp-nci.h | ||
| omap1_bl.h | ||
| omap-twl4030.h | ||
| omap-wd-timer.h | ||
| omapdss.h | ||
| pca953x.h | ||
| pca954x.h | ||
| pcf857x.h | ||
| pcmcia-pxa2xx_viper.h | ||
| phy-da8xx-usb.h | ||
| pinctrl-single.h | ||
| pixcir_i2c_ts.h | ||
| pm33xx.h | ||
| pwm_omap_dmtimer.h | ||
| pxa2xx_udc.h | ||
| pxa_sdhci.h | ||
| regulator-haptic.h | ||
| remoteproc-omap.h | ||
| rtc-ds2404.h | ||
| rtc-v3020.h | ||
| s3c-hsotg.h | ||
| s3c-hsudc.h | ||
| sa11x0-serial.h | ||
| sc18is602.h | ||
| sdhci-pic32.h | ||
| serial-imx.h | ||
| serial-omap.h | ||
| serial-sccnxp.h | ||
| shmob_drm.h | ||
| sht3x.h | ||
| shtc1.h | ||
| si5351.h | ||
| simplefb.h | ||
| sky81452-backlight.h | ||
| spi-clps711x.h | ||
| spi-davinci.h | ||
| spi-ep93xx.h | ||
| spi-imx.h | ||
| spi-mt65xx.h | ||
| spi-nuc900.h | ||
| spi-omap2-mcspi.h | ||
| spi-s3c64xx.h | ||
| ssm2518.h | ||
| st33zp24.h | ||
| st_sensors_pdata.h | ||
| syscon.h | ||
| tc35876x.h | ||
| tda9950.h | ||
| ti-aemif.h | ||
| ti-sysc.h | ||
| touchscreen-s3c2410.h | ||
| tsc2007.h | ||
| tsl2563.h | ||
| tsl2772.h | ||
| uio_dmem_genirq.h | ||
| uio_pruss.h | ||
| usb3503.h | ||
| usb-davinci.h | ||
| usb-ehci-mxc.h | ||
| usb-ehci-orion.h | ||
| usb-musb-ux500.h | ||
| usb-mx2.h | ||
| usb-ohci-pxa27x.h | ||
| usb-ohci-s3c2410.h | ||
| usb-omap1.h | ||
| usb-omap.h | ||
| usb-pxa3xx-ulpi.h | ||
| usb-s3c2410_udc.h | ||
| ux500_wdt.h | ||
| video_s3c.h | ||
| video-clcd-versatile.h | ||
| video-ep93xx.h | ||
| video-imxfb.h | ||
| video-mx3fb.h | ||
| video-nuc900fb.h | ||
| video-pxafb.h | ||
| voltage-omap.h | ||
| wiznet.h | ||
| wkup_m3.h | ||
| zforce_ts.h | ||