Russell King 7b4e9ced69 ARM: clcd: add method for describing display capabilities ... The ARM CLCD PL110 controller in TFT mode provides two output formats based on whether the controller is in 24bpp mode or not - either 5551 or 888. PL111 augments this with a 444 and 565 modes. Some implementations provide an external MUX on the PL110 output to reassign the bits to achieve 565 mode. Provide a system of capability flags to allow the CLCD driver to work out what is supported by each panel and board, and therefore which display formats are permitted. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>		2011-02-19 11:09:05 +00:00
..
bus.h	ARM: 6467/1: amba: optional PrimeCell core voltage switch	2010-11-26 10:59:12 +00:00
clcd.h	ARM: clcd: add method for describing display capabilities	2011-02-19 11:09:05 +00:00
kmi.h
mmci.h	ARM: 6307/1: mmci: allow the card detect GPIO value not to be inverted	2010-08-26 19:54:27 +01:00
pl08x.h	ARM: PL08x: cleanup comments	2011-01-16 16:55:43 -08:00
pl022.h	spi/pl022: get rid of chipinfo dev pointer	2010-10-12 21:37:37 -06:00
pl061.h	ARM: 6003/1: removing compilation warning from pl061.h	2010-03-29 17:33:33 +01:00
pl093.h	ARM: PL093: Header file for PL093 SSMC PrimeCell	2009-07-30 23:22:54 +01:00
pl330.h	DMA: PL330: Add dma api driver	2010-05-23 20:28:19 -07:00
serial.h	ARM: PL011: add DMA burst threshold support for ST variants	2011-01-05 16:58:53 +00:00