mirror_ubuntu-kernels/include/linux/platform_data
Linus Torvalds 6b5a12dbca ARM: SoC multiplatform code changes for v4.5
This branch is the culmination of 5 years of effort to bring the ARMv6
 and ARMv7 platforms together such that they can all be enabled and
 boot the same kernel. It has been a tremendous amount of cleanup and
 refactoring by a huge number of people, and creation of several new
 (and major) subsystems to better abstract out all the platform details
 in an appropriate manner.
 
 The bulk of this branch is a large patchset from Arnd that brings several
 of the more minor and older platforms we have closer to multiplatform
 support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview
 Much of this is moving around header files from old mach directories,
 but there are also some cleanup patches of debug_ll (lowlevel debug
 per-platform options) and other parts.
 
 Linus Walleij also has some patchs to clean up the older ARM Realview
 platforms by finally introducing DT support, and Rob Herring has some
 for ARM Versatile which is now DT-only. Both of these platforms are
 now multiplatform.
 
 Finally, a couple of patches from Russell for Dove PMU, and a fix from
 Valentin Rothberg for Exynos ADC, which were rebased on top of the
 series to avoid conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIUAwUAVqAGcmCrR//JCVInAQLDog/4x9F0PHGmZhexGfFOpi2Od63Jjx55izRU
 zRXqRjjFjambOrZuOx8lEGDy/qzqKbsDU8D1P4IUugkDr2bLSXv+NTLZL1kNBIdm
 YOlJhw/BmzLYqauOHmBzGhtv1FDUk3rqbgTsP5tTWj5LpSkwjmqui3HBZpi+f3Rr
 YOn+NeQSARiw+51D0b106a9RFshQXRGgn5m3xFjLWhJqshb2z2Ew5cogX/zdwrrM
 ss1BFomxsvgk6S+snN6v7cEX2iXe3r89qNR5jEW5BgNpQGFsAUeXPr9zzH07L/Qq
 O7XLw9jt5MX/X5372zVHPb57WoflLbF9cFaaDUZV3eTqt3lC67BTxOtYIdC2i90k
 E5GYlsy88CRwT2EO+ok/6UTryph+hVv7JqHfbKfnISrbraMCK36DtDTpBIpZ9uYF
 rRB7ncJZUWBcyoe+qvitSl+2KV54iB1ez2RXsketxM98dDZsfB2M2ImFou1F/Pgg
 ALvpifPubi/uDe7xNUsSuaT6/3jAomBuNsxnkYJ3NeiH/+duZbOYGkzK/LlcjZyc
 UrA0IpLfwIFsBNzwfpZPZ1lkEu8Y1YZZ+Hv9k65q1wMuBDgrFI5zUeYrPZi4pN9T
 Yo1xP9FstVLDouJrpGZo12VIIxR1UBeGqfRI/BZ58LEF3PRq/g2OVFsdQia5gZKr
 ddiJKSL1Vw==
 =z1AW
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform code updates from Arnd Bergmann:
 "This branch is the culmination of 5 years of effort to bring the ARMv6
  and ARMv7 platforms together such that they can all be enabled and
  boot the same kernel.  It has been a tremendous amount of cleanup and
  refactoring by a huge number of people, and creation of several new
  (and major) subsystems to better abstract out all the platform details
  in an appropriate manner.

  The bulk of this branch is a large patchset from Arnd that brings
  several of the more minor and older platforms we have closer to
  multiplatform support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0
  and realview Much of this is moving around header files from old mach
  directories, but there are also some cleanup patches of debug_ll
  (lowlevel debug per-platform options) and other parts.

  Linus Walleij also has some patchs to clean up the older ARM Realview
  platforms by finally introducing DT support, and Rob Herring has some
  for ARM Versatile which is now DT-only.  Both of these platforms are
  now multiplatform.

  Finally, a couple of patches from Russell for Dove PMU, and a fix from
  Valentin Rothberg for Exynos ADC, which were rebased on top of the
  series to avoid conflicts"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: realview: don't select SMP_ON_UP for UP builds
  ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
  ARM: s3c64xx: fix pm-debug compilation
  iio: exynos-adc: fix irqf_oneshot.cocci warnings
  ARM: realview: build realview-dt SMP support only when used
  ARM: realview: select apropriate targets
  ARM: realview: clean up header files
  ARM: realview: make all header files local
  ARM: no longer make CPU targets visible separately
  ARM: integrator: use explicit core module options
  ARM: realview: enable multiplatform
  ARM: make default platform work for NOMMU
  ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
  ARM: defconfig: use correct debug_ll settings
  ARM: versatile: convert to multi-platform
  ARM: versatile: merge mach code into a single file
  ARM: versatile: switch to DT only booting and remove legacy code
  ARM: versatile: add DT based PCI detection
  ARM: pxa: mark ezx structures as __maybe_unused
  ARM: pxa: mark raumfeld init functions as __maybe_unused
  ...
2016-01-20 18:03:56 -08:00
..
media [media] rcar_vin: Remove obsolete platform data support 2015-11-19 08:11:22 -02:00
ad5449.h
ad5755.h
ad7266.h
ad7291.h staging:iio:ad7291: Move out of staging 2014-07-08 21:17:30 +01:00
ad7298.h
ad7303.h iio:dac: Add support for the AD7303 2013-06-11 20:25:58 +01:00
ad7791.h
ad7793.h
ad7887.h
adau17x1.h ASoC: Add ADAU1381/ADAU1781 audio CODEC support 2014-05-27 20:54:51 +01:00
adau1977.h ASoC: Add ADAU1977 CODEC driver 2014-02-19 13:36:15 +09:00
ads7828.h
arm-ux500-pm.h
asoc-imx-ssi.h
asoc-kirkwood.h
asoc-mx27vis.h
asoc-palm27x.h
asoc-s3c24xx_simtec.h ASoC: s3c24xx: Remove invalid file reference 2014-02-25 21:29:31 +09:00
asoc-s3c.h ASoC: samsung: pass filter function as pointer 2015-11-21 13:27:22 +00:00
asoc-ti-mcbsp.h ASoC: mcbsp: Trivial cleanup in asoc-ti-mcbsp.h 2013-12-30 11:50:16 +00:00
asoc-ux500-msp.h ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion 2014-01-07 15:36:09 +00:00
at24.h misc: (at24) move header to linux/platform_data/ 2013-09-30 06:02:34 +02:00
at91_adc.h iio: adc: at91_adc: Add support for touchscreens without TSMR 2014-05-07 18:28:40 +02:00
ata-pxa.h
ata-samsung_cf.h ata: pata_samsung_cf: removes s5pc100 related ata codes 2014-06-30 10:48:08 -04:00
atmel_mxt_ts.h Input: atmel_mxt_ts - use deep sleep mode when stopped 2015-08-04 17:03:52 -07:00
atmel.h ARM: SoC platform updates for v4.4 2015-11-10 14:56:23 -08:00
bcmgenet.h net: bcmgenet: enable driver to work without a device tree 2014-12-08 20:26:59 -05:00
bd6107.h backlight: Add ROHM BD6107 backlight driver 2013-07-16 13:01:19 +09:00
bfin_rotary.h Input: bfin_rotary - move pin lists into into platform data 2015-02-15 16:06:27 -08:00
brcmfmac-sdio.h brcmfmac: abstract tx packet processing functions 2013-08-15 16:07:55 -04:00
bt-nokia-h4p.h staging/bluetooth: Add hci_h4p driver 2014-02-07 10:13:53 -08:00
clk-integrator.h ARM: integrator: switch to fetch clocks from device tree 2014-02-13 11:20:42 +01:00
clk-lpss.h ACPI / LPSS: register clock device for Lynxpoint DMA properly 2013-05-14 10:23:58 +05:30
clk-realview.h
clk-u300.h
clk-ux500.h clk/ARM: move Ux500 PRCC bases to the device tree 2015-08-24 16:49:14 -07:00
cpuidle-exynos.h cpuidle: exynos: add coupled cpuidle support for exynos4210 2015-01-30 08:39:15 +09:00
crypto-atmel.h
crypto-ux500.h
cyttsp4.h Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices 2013-06-30 21:24:21 -07:00
davinci_asp.h ASoC: davinci-mcasp: Rename platform data struct 2014-02-03 18:26:59 +00:00
db8500_thermal.h
dma-atmel.h dmaengine: at_hdmac: extend hardware handshaking interface identification 2013-07-05 11:40:29 +05:30
dma-coh901318.h
dma-dw.h dmaengine: dw: some Intel devices has no memcpy support 2015-10-31 07:32:43 +05:30
dma-ep93xx.h
dma-hsu.h dmaengine: hsu: remove platform data 2015-10-17 21:22:08 -07:00
dma-imx-sdma.h dmaengine: imx-sdma: Add support for version 3 firmware 2015-03-18 13:53:33 +05:30
dma-imx.h dmaengine: imx-sdma: Add a new DMATYPE for SAI 2014-11-17 13:50:43 +05:30
dma-mmp_tdma.h dma: mmp_tdma: Fix build for ARM64 2015-02-03 17:47:35 -08:00
dma-mv_xor.h dma: mv_xor: Cleanup in dma-mv_xor.h header 2014-01-13 13:30:31 +05:30
dma-s3c24xx.h ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442 2013-10-21 05:32:48 +09:00
dma-ste-dma40.h dmaengine: ste_dma40: Allow memcpy channels to be configured from DT 2013-06-04 11:12:11 +02:00
dmtimer-omap.h
drv260x-pdata.h Input: drv260x - add TI drv260x haptics driver 2014-08-19 22:19:28 -07:00
dwc3-omap.h
edma.h dmaengine updates for 4.5-rc1 2016-01-13 10:59:52 -08:00
efm32-spi.h spi: new controller driver for efm32 SoCs 2013-08-09 17:32:57 +01:00
efm32-uart.h
ehci-sh.h
elm.h nand: omap2: Remove horrible ifdefs to fix module probe 2014-09-22 11:37:51 -07:00
emif_plat.h
eth-netx.h net: Cleanup in eth-netx.h 2014-01-02 03:30:35 -05:00
fsa9480.h
g762.h Add support for GMT G762/G763 PWM fan controllers 2013-06-27 10:31:42 -07:00
gpio_backlight.h backlight: Add GPIO-based backlight driver 2013-07-16 13:01:05 +09:00
gpio-ath79.h MIPS: ath79: Add OF support to the GPIO driver 2015-06-21 21:54:09 +02:00
gpio-davinci.h gpio: remove obsolete tnetv107x driver 2014-03-05 10:44:44 +08:00
gpio-dwapb.h GPIO: gpio-dwapb: Enable platform driver binding to MFD driver 2014-09-23 17:51:37 +02:00
gpio-lpc32xx.h ARM: lpc32xx: move custom GPIO header 2013-12-03 11:26:06 +01:00
gpio-omap.h gpio: omap: Allow building as a loadable module 2015-05-06 15:23:03 +02:00
gpio-ts5500.h
hsmmc-omap.h ARM: OMAP2: HSMMC: explicit fields to declare cover/card detect pin 2015-03-27 12:19:37 +01:00
hwmon-s3c.h hwmon: (s3c) Trivial cleanup in hwmon-s3c.h 2014-01-14 21:36:52 -08:00
i2c-cbus-gpio.h
i2c-davinci.h i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery 2015-04-10 17:57:28 +02:00
i2c-designware.h i2c: designware: add support of platform data to set I2C mode 2014-09-29 22:41:17 +02:00
i2c-imx.h
i2c-mux-reg.h i2c: mux: Add register-based mux i2c-mux-reg 2015-08-24 14:05:18 +02:00
i2c-nuc900.h
i2c-s3c2410.h i2c: s3c2410: Trivial cleanup in header file 2014-03-10 17:32:28 +01:00
ina2xx.h
intel-mid_wdt.h watchdog: add Intel MID watchdog driver support 2014-06-10 21:48:16 +02:00
invensense_mpu6050.h
iommu-omap.h iommu/omap: Remove platform data da_start and da_end fields 2014-07-29 12:39:56 +02:00
irda-pxaficp.h
irda-sa11x0.h arm: sa1100: move irda header to linux/platform_data 2014-12-30 18:44:07 -05:00
isl9305.h regulator: isl9305: Add Intersil ISL9305/H driver 2014-09-06 12:43:05 +01:00
itco_wdt.h mfd: watchdog: iTCO_wdt: Expose watchdog properties using platform data 2015-08-11 15:03:21 +01:00
keyboard-pxa930_rotary.h
keyboard-spear.h Input: update email-id of Rajeev Kumar 2015-05-22 10:59:55 -07:00
keypad-ep93xx.h Input: keypad-ep93xx - cleanup header file 2013-12-27 17:20:21 -08:00
keypad-nomadik-ske.h
keypad-omap.h Input: keypad-omap - cleanup header file 2013-12-27 17:20:22 -08:00
keypad-pxa27x.h Input: pxa27x-keypad - use matrix_keymap for matrix keys 2013-06-18 22:56:51 -07:00
keypad-w90p910.h
keyscan-davinci.h
lcd-mipid.h
leds-kirkwood-netxbig.h leds: netxbig: add device tree binding 2015-11-03 08:59:25 +01:00
leds-kirkwood-ns2.h leds: leds-ns2: move LED modes mapping outside of the driver 2015-08-28 14:06:06 +02:00
leds-lm355x.h
leds-lm3642.h
leds-lp55xx.h leds: lp55xx: handle enable pin in driver 2013-10-25 10:13:25 -07:00
leds-omap.h
leds-pca963x.h leds-pca9633: Rename to leds-pca963x 2013-08-26 17:22:14 -07:00
leds-s3c24xx.h leds: leds-s3c24xx: Trivial cleanup in header file 2014-02-27 09:57:11 -08:00
lm3630a_bl.h backlight: lm3630: apply chip revision 2013-11-13 12:09:15 +09:00
lm3639_bl.h
lp855x.h backlight: lp855x: Use private data for regulator control 2015-08-25 08:40:44 +01:00
lp8727.h
lp8755.h
lv5207lp.h backlight: Add Sanyo LV5207LP backlight driver 2013-07-16 13:01:10 +09:00
macb.h net/macb: convert to kernel doc 2015-07-27 01:10:29 -07:00
mailbox-omap.h ARM: OMAP2+: add user and fifo info to mailbox platform data 2013-06-11 11:41:30 -05:00
max197.h hwmon: (max197) add include guard 2014-01-14 21:36:53 -08:00
max3421-hcd.h usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity 2014-05-29 11:19:30 -07:00
max6697.h
mdio-gpio.h net: mdio-gpio: move platform data header 2015-10-21 19:50:44 -07:00
mfd-mcp-sa11x0.h mfd: Cleanup mfd-mcp-sa11x0.h header 2014-01-21 08:28:59 +00:00
microread.h nfc: microread: Fix header comment 2015-12-29 19:06:22 +01:00
mmc-davinci.h
mmc-esdhc-imx.h mmc: sdhci-esdhc-imx: add tuning-step setting support 2015-08-27 14:50:50 +02:00
mmc-mxcmmc.h
mmc-omap.h mmc: omap_hsmmc: remove prepare/complete system suspend support. 2015-01-19 09:56:08 +01:00
mmc-pxamci.h ARM: pxa: propagate errors from regulator_enable() to pxamci 2013-07-23 12:15:15 -07:00
mmc-s3cmci.h
mmc-sdhci-s3c.h
mmp_audio.h
mmp_dma.h
mouse-pxa930_trkball.h
mtd-davinci-aemif.h ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif 2014-02-23 20:33:18 +05:30
mtd-davinci.h
mtd-mxc_nand.h
mtd-nand-omap2.h nand: omap2: Add support for flash-based bad block table 2014-09-17 01:02:48 -07:00
mtd-nand-pxa3xx.h mtd: pxa3xx_nand: Remove unused platform-data flash specification 2015-09-02 14:11:40 -07:00
mtd-nand-s3c2410.h mtd: nand: s3c2410: Trivial cleanup in header file 2014-03-10 22:42:26 -07:00
mtd-onenand-omap2.h mtd: omap2: Cleanup header files 2014-01-11 11:39:18 -08:00
mtd-orion_nand.h mtd: orion: Cleanup mtd-orion_nand.h header 2014-01-11 11:39:23 -08:00
mv_usb.h
net-cw1200.h cw1200: rename the cw1200 platform definition header 2013-06-03 15:54:56 -04:00
nfcmrvl.h NFC: nfcmrvl: add i2c driver 2015-10-27 04:21:14 +01:00
ntc_thermistor.h hwmon: (ntc_thermistor) Add support for ncpXXwf104 2015-05-31 22:58:36 -07:00
nxp-nci.h NFC: nxp-nci: Add support for NXP NCI chips 2015-03-26 11:07:50 +01:00
omap1_bl.h
omap_drm.h
omap-twl4030.h
omap-wd-timer.h
pca953x.h gpio: (gpio-pca953x) move header to linux/platform_data/ 2013-08-29 12:33:52 -07:00
pcmcia-pxa2xx_viper.h
pinctrl-adi2.h pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. 2013-09-19 14:37:27 +02:00
pinctrl-single.h pinctrl: single: Add support for auxdata 2013-10-10 15:30:47 -07:00
pixcir_i2c_ts.h Input: pixcir_i2c_ts - switch the device over to gpiod 2015-07-11 17:28:08 -07:00
pn544.h nfc: Fix FSF address in file headers 2013-12-11 10:56:21 -05:00
pxa2xx_udc.h
pxa_sdhci.h mmc: sdhci-pxav3: Move private driver data to driver source 2014-11-10 12:40:31 +01:00
regulator-haptic.h Input: add regulator haptic driver 2014-12-21 18:59:20 -08:00
remoteproc-omap.h remoteproc/omap: fix a sparse warning 2013-07-01 15:30:51 +03:00
s3c-hsotg.h usb: dwc2: rename all s3c_* to dwc2_* 2015-09-27 10:54:31 -05:00
s3c-hsudc.h
sa11x0-serial.h
sc18is602.h
serial-imx.h serial: imx: drop support for IRDA 2015-03-07 03:26:32 +01:00
serial-omap.h ARM: OMAP: serial: remove last vestige of DTR_gpio support. 2014-11-10 09:06:44 -08:00
serial-sccnxp.h Revert "serial: sccnxp: Add DT support" 2013-08-02 15:25:19 +08:00
sh_ipmmu.h
shmob_drm.h
sht15.h hwmon: (sht15) add include guard 2014-01-14 21:36:53 -08:00
shtc1.h hwmon: add support for Sensirion SHTC1 sensor 2014-06-12 08:36:48 -07:00
si5351.h clk: si5351: Do not pass struct clk in platform_data 2015-05-08 11:22:30 -07:00
simplefb.h fbdev changes for 3.12: 2013-09-05 09:49:32 -07:00
sky81452-backlight.h backlight: Add support Skyworks SKY81452 backlight driver 2015-03-12 09:08:19 +00:00
spi-clps711x.h
spi-davinci.h spi: davinci: Choose correct pre-scaler limit based on SOC 2015-07-24 17:35:51 +01:00
spi-ep93xx.h
spi-imx.h
spi-mt65xx.h spi: mediatek: fix spi incorrect endian usage 2015-08-20 11:09:47 -07:00
spi-nuc900.h spi: nuc900: Cleanup spi-nuc900.h header 2013-12-30 12:46:20 +00:00
spi-omap2-mcspi.h
spi-s3c64xx.h spi: s3c64xx: pass DMA arguments in platform data 2015-11-18 17:52:38 +00:00
ssm2518.h ASoC: Add ssm2518 support 2013-05-25 10:33:30 -04:00
st21nfca.h NFC: st21nfca: Adding support for secure element 2015-01-28 00:03:36 +01:00
st33zp24.h tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy) 2015-03-18 22:43:06 +01:00
st1232_pdata.h
st_sensors_pdata.h iio: Added ST-sensors platform data to select the DRDY interrupt pin 2013-08-03 18:40:28 +01:00
st-nci.h NFC: st-nci: Add ese-present/uicc-present dts properties 2015-10-27 03:55:10 +01:00
syscon.h mfd: syscon: Add platform data with a regmap config name 2014-05-15 17:02:19 +01:00
touchscreen-s3c2410.h ARM: s3c64xx: use new adc/touchscreen driver 2015-12-01 21:50:25 +01:00
tsl2563.h
uio_dmem_genirq.h
uio_pruss.h
usb3503.h usb: misc: usb3503: Add to select the ports to disable 2013-05-30 21:32:52 +09:00
usb-davinci.h
usb-ehci-mxc.h ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
usb-ehci-orion.h usb: ehci: Cleanup usb-ehci-orion.h header 2014-01-03 12:37:57 -08:00
usb-musb-ux500.h usb: musb: ux500: move channel number knowledge into the driver 2013-06-04 11:12:02 +02:00
usb-mx2.h
usb-ohci-pxa27x.h
usb-ohci-s3c2410.h
usb-omap1.h usb: omap1: add extcon to platform data 2013-12-06 14:36:37 -06:00
usb-omap.h
usb-pxa3xx-ulpi.h
usb-s3c2410_udc.h
ux500_wdt.h
video_s3c.h
video-clcd-versatile.h video: fix up versatile CLCD helper move 2014-07-23 17:41:00 +02:00
video-ep93xx.h ARM/fb: ep93xx: switch framebuffer to use modedb only 2015-08-13 12:25:44 +02:00
video-imxfb.h video: imxfb: Remove unused fields from platform data structure 2014-02-28 12:35:22 +02:00
video-mx3fb.h
video-nuc900fb.h
video-pxafb.h video: pxa: Cleanup video-pxafb.h header 2014-01-17 10:57:42 +02:00
voltage-omap.h
wiznet.h
wkup_m3.h remoteproc/wkup_m3: add a remoteproc driver for TI Wakeup M3 2015-06-17 09:58:08 +03:00
zforce_ts.h Input: zforce_ts - convert to use the gpiod interface 2015-07-08 21:50:57 -07:00