mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2025-11-23 11:35:37 +00:00
e533cda12d
As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TVacPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx37MMP/imMO5e0QY1/7xxXWm4Kgc/Uffqw2Dvhj74a 4Nrudwz6oUFGpZzIFYxqeCeWwotjA0nXmvM4Nl/SbxtlbV6nY/JrOL1OJToaGY0z Oc1jdA0MdXITdi6Xl5PTRqDeIHTSUmTclZWi5gvT7LFEvHog3mquJ7PiNTrjyuV0 9BmHipwfmH6V5gDJZvN2dDlkhy0cpQKJFw7ylKCL89UNiEAd2QtNG0d0RLdz7yPX IGdecFelOhG9MSZyuFYYB2HOI33ukjZ9dA+yFy7BWOqegf/Z5hI02mxpke7Sys/5 4XEN7ksSSYr6sm3h9XNW++IYkapZ9y/ZW+sQdiBZ3GMOwMXj02TdRkpC7f+FgAPo Hl7yXodGmXynL6ULu7/lIbBvqfWkLcwfVCYZx6PoWRE2q5g5ifoYp9b8kI5cLXrb BJn85XIuIaoO0cgrq7EzZnksaiwY1CNL84mYgkKRCGbBoJKHRiU+8Ilm5SKzk3kq KJ0gmbwFMjvTYxs3g6LPCo0jUNLjmLQMr0tL7iHDWkk5uqA+gfjKSLQfPby3jrMr 6RDZBzMB+tPz1e++RWo41XD/Mm2kw8MGstsCOLzk2TdLh7e3fPfU4g7m0aqs/Q1y +LCqshffF/XVzV2uTFHDUGWufIM9nY6rdzuBc+JACJ5E+QyDg1tGKtMB3TYqgdN2 aRY3NLSv =xjfB -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ...
756 lines
20 KiB
Plaintext
756 lines
20 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright 2019 NXP
|
|
*/
|
|
|
|
#include <dt-bindings/clock/imx8mp-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/thermal/thermal.h>
|
|
|
|
#include "imx8mp-pinfunc.h"
|
|
|
|
/ {
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
ethernet0 = &fec;
|
|
gpio0 = &gpio1;
|
|
gpio1 = &gpio2;
|
|
gpio2 = &gpio3;
|
|
gpio3 = &gpio4;
|
|
gpio4 = &gpio5;
|
|
i2c0 = &i2c1;
|
|
i2c1 = &i2c2;
|
|
i2c2 = &i2c3;
|
|
i2c3 = &i2c4;
|
|
i2c4 = &i2c5;
|
|
i2c5 = &i2c6;
|
|
mmc0 = &usdhc1;
|
|
mmc1 = &usdhc2;
|
|
mmc2 = &usdhc3;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
serial3 = &uart4;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
A53_0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0>;
|
|
clock-latency = <61036>;
|
|
clocks = <&clk IMX8MP_CLK_ARM>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
A53_1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x1>;
|
|
clock-latency = <61036>;
|
|
clocks = <&clk IMX8MP_CLK_ARM>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
A53_2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x2>;
|
|
clock-latency = <61036>;
|
|
clocks = <&clk IMX8MP_CLK_ARM>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
A53_3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x3>;
|
|
clock-latency = <61036>;
|
|
clocks = <&clk IMX8MP_CLK_ARM>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
A53_L2: l2-cache0 {
|
|
compatible = "cache";
|
|
};
|
|
};
|
|
|
|
osc_32k: clock-osc-32k {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "osc_32k";
|
|
};
|
|
|
|
osc_24m: clock-osc-24m {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "osc_24m";
|
|
};
|
|
|
|
clk_ext1: clock-ext1 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <133000000>;
|
|
clock-output-names = "clk_ext1";
|
|
};
|
|
|
|
clk_ext2: clock-ext2 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <133000000>;
|
|
clock-output-names = "clk_ext2";
|
|
};
|
|
|
|
clk_ext3: clock-ext3 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <133000000>;
|
|
clock-output-names = "clk_ext3";
|
|
};
|
|
|
|
clk_ext4: clock-ext4 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency= <133000000>;
|
|
clock-output-names = "clk_ext4";
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <2000>;
|
|
thermal-sensors = <&tmu 0>;
|
|
trips {
|
|
cpu_alert0: trip0 {
|
|
temperature = <85000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu_crit0: trip1 {
|
|
temperature = <95000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&cpu_alert0>;
|
|
cooling-device =
|
|
<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
soc-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <2000>;
|
|
thermal-sensors = <&tmu 1>;
|
|
trips {
|
|
soc_alert0: trip0 {
|
|
temperature = <85000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
soc_crit0: trip1 {
|
|
temperature = <95000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&soc_alert0>;
|
|
cooling-device =
|
|
<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
|
|
clock-frequency = <8000000>;
|
|
arm,no-tick-in-suspend;
|
|
};
|
|
|
|
soc@0 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x0 0x3e000000>;
|
|
|
|
aips1: bus@30000000 {
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
reg = <0x30000000 0x400000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gpio1: gpio@30200000 {
|
|
compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30200000 0x10000>;
|
|
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_GPIO1_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 5 30>;
|
|
};
|
|
|
|
gpio2: gpio@30210000 {
|
|
compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30210000 0x10000>;
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_GPIO2_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 35 21>;
|
|
};
|
|
|
|
gpio3: gpio@30220000 {
|
|
compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30220000 0x10000>;
|
|
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_GPIO3_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 0 144 4>;
|
|
};
|
|
|
|
gpio4: gpio@30230000 {
|
|
compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30230000 0x10000>;
|
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_GPIO4_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 82 32>;
|
|
};
|
|
|
|
gpio5: gpio@30240000 {
|
|
compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30240000 0x10000>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_GPIO5_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 114 30>;
|
|
};
|
|
|
|
tmu: tmu@30260000 {
|
|
compatible = "fsl,imx8mp-tmu";
|
|
reg = <0x30260000 0x10000>;
|
|
clocks = <&clk IMX8MP_CLK_TSENSOR_ROOT>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
wdog1: watchdog@30280000 {
|
|
compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
|
|
reg = <0x30280000 0x10000>;
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_WDOG1_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
iomuxc: pinctrl@30330000 {
|
|
compatible = "fsl,imx8mp-iomuxc";
|
|
reg = <0x30330000 0x10000>;
|
|
};
|
|
|
|
gpr: iomuxc-gpr@30340000 {
|
|
compatible = "fsl,imx8mp-iomuxc-gpr", "syscon";
|
|
reg = <0x30340000 0x10000>;
|
|
};
|
|
|
|
ocotp: efuse@30350000 {
|
|
compatible = "fsl,imx8mp-ocotp", "fsl,imx8mm-ocotp", "syscon";
|
|
reg = <0x30350000 0x10000>;
|
|
clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>;
|
|
/* For nvmem subnodes */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpu_speed_grade: speed-grade@10 {
|
|
reg = <0x10 4>;
|
|
};
|
|
};
|
|
|
|
anatop: anatop@30360000 {
|
|
compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop",
|
|
"syscon";
|
|
reg = <0x30360000 0x10000>;
|
|
};
|
|
|
|
snvs: snvs@30370000 {
|
|
compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
|
|
reg = <0x30370000 0x10000>;
|
|
|
|
snvs_rtc: snvs-rtc-lp {
|
|
compatible = "fsl,sec-v4.0-mon-rtc-lp";
|
|
regmap =<&snvs>;
|
|
offset = <0x34>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_SNVS_ROOT>;
|
|
clock-names = "snvs-rtc";
|
|
};
|
|
|
|
snvs_pwrkey: snvs-powerkey {
|
|
compatible = "fsl,sec-v4.0-pwrkey";
|
|
regmap = <&snvs>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_SNVS_ROOT>;
|
|
clock-names = "snvs-pwrkey";
|
|
linux,keycode = <KEY_POWER>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
clk: clock-controller@30380000 {
|
|
compatible = "fsl,imx8mp-ccm";
|
|
reg = <0x30380000 0x10000>;
|
|
#clock-cells = <1>;
|
|
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
|
|
<&clk_ext3>, <&clk_ext4>;
|
|
clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
|
|
"clk_ext3", "clk_ext4";
|
|
assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>,
|
|
<&clk IMX8MP_CLK_A53_CORE>,
|
|
<&clk IMX8MP_CLK_NOC>,
|
|
<&clk IMX8MP_CLK_NOC_IO>,
|
|
<&clk IMX8MP_CLK_GIC>,
|
|
<&clk IMX8MP_CLK_AUDIO_AHB>,
|
|
<&clk IMX8MP_CLK_AUDIO_AXI_SRC>,
|
|
<&clk IMX8MP_CLK_IPG_AUDIO_ROOT>,
|
|
<&clk IMX8MP_AUDIO_PLL1>,
|
|
<&clk IMX8MP_AUDIO_PLL2>;
|
|
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
|
|
<&clk IMX8MP_ARM_PLL_OUT>,
|
|
<&clk IMX8MP_SYS_PLL2_1000M>,
|
|
<&clk IMX8MP_SYS_PLL1_800M>,
|
|
<&clk IMX8MP_SYS_PLL2_500M>,
|
|
<&clk IMX8MP_SYS_PLL1_800M>,
|
|
<&clk IMX8MP_SYS_PLL1_800M>;
|
|
assigned-clock-rates = <0>, <0>,
|
|
<1000000000>,
|
|
<800000000>,
|
|
<500000000>,
|
|
<400000000>,
|
|
<800000000>,
|
|
<400000000>,
|
|
<393216000>,
|
|
<361267200>;
|
|
};
|
|
|
|
src: reset-controller@30390000 {
|
|
compatible = "fsl,imx8mp-src", "syscon";
|
|
reg = <0x30390000 0x10000>;
|
|
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
|
#reset-cells = <1>;
|
|
};
|
|
};
|
|
|
|
aips2: bus@30400000 {
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
reg = <0x30400000 0x400000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
pwm1: pwm@30660000 {
|
|
compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30660000 0x10000>;
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_PWM1_ROOT>,
|
|
<&clk IMX8MP_CLK_PWM1_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm2: pwm@30670000 {
|
|
compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30670000 0x10000>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_PWM2_ROOT>,
|
|
<&clk IMX8MP_CLK_PWM2_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm3: pwm@30680000 {
|
|
compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30680000 0x10000>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_PWM3_ROOT>,
|
|
<&clk IMX8MP_CLK_PWM3_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm4: pwm@30690000 {
|
|
compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30690000 0x10000>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_PWM4_ROOT>,
|
|
<&clk IMX8MP_CLK_PWM4_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
system_counter: timer@306a0000 {
|
|
compatible = "nxp,sysctr-timer";
|
|
reg = <0x306a0000 0x20000>;
|
|
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&osc_24m>;
|
|
clock-names = "per";
|
|
};
|
|
};
|
|
|
|
aips3: bus@30800000 {
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
reg = <0x30800000 0x400000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
ecspi1: spi@30820000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x30820000 0x10000>;
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
|
|
<&clk IMX8MP_CLK_ECSPI1_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi2: spi@30830000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x30830000 0x10000>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
|
|
<&clk IMX8MP_CLK_ECSPI2_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi3: spi@30840000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x30840000 0x10000>;
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
|
|
<&clk IMX8MP_CLK_ECSPI3_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@30860000 {
|
|
compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
|
|
reg = <0x30860000 0x10000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
|
|
<&clk IMX8MP_CLK_UART1_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@30880000 {
|
|
compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
|
|
reg = <0x30880000 0x10000>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
|
|
<&clk IMX8MP_CLK_UART3_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@30890000 {
|
|
compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
|
|
reg = <0x30890000 0x10000>;
|
|
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
|
|
<&clk IMX8MP_CLK_UART2_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
crypto: crypto@30900000 {
|
|
compatible = "fsl,sec-v4.0";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x30900000 0x40000>;
|
|
ranges = <0 0x30900000 0x40000>;
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_AHB>,
|
|
<&clk IMX8MP_CLK_IPG_ROOT>;
|
|
clock-names = "aclk", "ipg";
|
|
|
|
sec_jr0: jr@1000 {
|
|
compatible = "fsl,sec-v4.0-job-ring";
|
|
reg = <0x1000 0x1000>;
|
|
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr1: jr@2000 {
|
|
compatible = "fsl,sec-v4.0-job-ring";
|
|
reg = <0x2000 0x1000>;
|
|
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr2: jr@3000 {
|
|
compatible = "fsl,sec-v4.0-job-ring";
|
|
reg = <0x3000 0x1000>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
i2c1: i2c@30a20000 {
|
|
compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x30a20000 0x10000>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_I2C1_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@30a30000 {
|
|
compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x30a30000 0x10000>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_I2C2_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@30a40000 {
|
|
compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x30a40000 0x10000>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_I2C3_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@30a50000 {
|
|
compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x30a50000 0x10000>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_I2C4_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@30a60000 {
|
|
compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
|
|
reg = <0x30a60000 0x10000>;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_UART4_ROOT>,
|
|
<&clk IMX8MP_CLK_UART4_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
mu: mailbox@30aa0000 {
|
|
compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
|
|
reg = <0x30aa0000 0x10000>;
|
|
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_MU_ROOT>;
|
|
#mbox-cells = <2>;
|
|
};
|
|
|
|
i2c5: i2c@30ad0000 {
|
|
compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x30ad0000 0x10000>;
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_I2C5_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c6: i2c@30ae0000 {
|
|
compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x30ae0000 0x10000>;
|
|
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_I2C6_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usdhc1: mmc@30b40000 {
|
|
compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
|
|
reg = <0x30b40000 0x10000>;
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_DUMMY>,
|
|
<&clk IMX8MP_CLK_NAND_USDHC_BUS>,
|
|
<&clk IMX8MP_CLK_USDHC1_ROOT>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step= <2>;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usdhc2: mmc@30b50000 {
|
|
compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
|
|
reg = <0x30b50000 0x10000>;
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_DUMMY>,
|
|
<&clk IMX8MP_CLK_NAND_USDHC_BUS>,
|
|
<&clk IMX8MP_CLK_USDHC2_ROOT>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step= <2>;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usdhc3: mmc@30b60000 {
|
|
compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
|
|
reg = <0x30b60000 0x10000>;
|
|
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_DUMMY>,
|
|
<&clk IMX8MP_CLK_NAND_USDHC_BUS>,
|
|
<&clk IMX8MP_CLK_USDHC3_ROOT>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step= <2>;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdma1: dma-controller@30bd0000 {
|
|
compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
|
|
reg = <0x30bd0000 0x10000>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>,
|
|
<&clk IMX8MP_CLK_AHB>;
|
|
clock-names = "ipg", "ahb";
|
|
#dma-cells = <3>;
|
|
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
|
|
};
|
|
|
|
fec: ethernet@30be0000 {
|
|
compatible = "fsl,imx8mp-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
|
|
reg = <0x30be0000 0x10000>;
|
|
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MP_CLK_ENET1_ROOT>,
|
|
<&clk IMX8MP_CLK_SIM_ENET_ROOT>,
|
|
<&clk IMX8MP_CLK_ENET_TIMER>,
|
|
<&clk IMX8MP_CLK_ENET_REF>,
|
|
<&clk IMX8MP_CLK_ENET_PHY_REF>;
|
|
clock-names = "ipg", "ahb", "ptp",
|
|
"enet_clk_ref", "enet_out";
|
|
assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
|
|
<&clk IMX8MP_CLK_ENET_TIMER>,
|
|
<&clk IMX8MP_CLK_ENET_REF>,
|
|
<&clk IMX8MP_CLK_ENET_TIMER>;
|
|
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
|
|
<&clk IMX8MP_SYS_PLL2_100M>,
|
|
<&clk IMX8MP_SYS_PLL2_125M>;
|
|
assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
|
|
fsl,num-tx-queues = <3>;
|
|
fsl,num-rx-queues = <3>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@38800000 {
|
|
compatible = "arm,gic-v3";
|
|
reg = <0x38800000 0x10000>,
|
|
<0x38880000 0xc0000>;
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
ddr-pmu@3d800000 {
|
|
compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu";
|
|
reg = <0x3d800000 0x400000>;
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
};
|