Peter De Schrijver d0a57bd5b5 clk: tegra: make tegra_clocks_apply_init_table() arch_initcall ... tegra_clocks_apply_init_table() needs to be called after the udelay loop has been calibrated (see commit 441f199a37 ("clk: tegra: defer application of init table") for why that is). On existing Tegra SoCs this was done by calling tegra_clocks_apply_init_table() from tegra_dt_init(). To make this also work on ARM64, we need to change this into an initcall. tegra_dt_init() is called from customize_machine which is an arch_initcall. Therefore this should also work on existing 32bit Tegra SoCs. Tested on Tegra20 (ventana), Tegra30 (beaverboard), Tegra124 (jetson TK1) and Tegra132. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> [paul@pwsan.com: tweaked the commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com>		2015-02-02 15:47:28 +02:00
..
at91_pmc.h	clk: at91: add a driver for the h32mx clock	2014-09-22 11:38:59 +02:00
bcm2835.h
clk-conf.h	clk: Support for clock parents and rates assigned from device tree	2014-07-25 15:16:27 -07:00
mxs.h	ARM: mxs: remove custom .init_time hook	2013-09-29 21:09:34 +02:00
shmobile.h	clk: shmobile: r8a7779: Add clocks support	2014-05-12 23:07:40 -07:00
sunxi.h	clk: sunxi: Fixup clk_sunxi_mmc_phase_control to take a clk rather then a hw_clk	2014-05-14 16:58:21 -07:00
tegra.h	clk: tegra: make tegra_clocks_apply_init_table() arch_initcall	2015-02-02 15:47:28 +02:00
ti.h	ARM: OMAP2+: clock: fix DPLL code to use new determine rate APIs	2014-12-15 17:05:08 -08:00
zynq.h	ARM: zynq: Map I/O memory on clkc init	2014-02-10 11:21:13 +01:00