Emil Tantilov 232ef6bc45 ixgbe: Fix link issues caused by a reset while interface is down ... Interface fails to obtain link on 82599 SFP in the following scenario: 1. Set advertised speed to GB: ethtool -s eth0 advertise 0x20 2. Bring interface down ip link set eth0 down 3. Issue any command that leads to a reset: ethtool -t eth0 4. Bring link back up: ip link set eth0 up Following patch makes sure that the driver flaps the Tx laser every time ixgbe_start_hw() is called, and not only when the speed is set. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>		2011-11-02 16:55:15 -07:00
..
ixgbe_82598.c
ixgbe_82599.c
ixgbe_common.c
ixgbe_common.h
ixgbe_dcb_82598.c
ixgbe_dcb_82598.h
ixgbe_dcb_82599.c
ixgbe_dcb_82599.h
ixgbe_dcb_nl.c
ixgbe_dcb.c
ixgbe_dcb.h
ixgbe_ethtool.c
ixgbe_fcoe.c
ixgbe_fcoe.h
ixgbe_main.c
ixgbe_mbx.c
ixgbe_mbx.h
ixgbe_phy.c
ixgbe_phy.h
ixgbe_sriov.c
ixgbe_sriov.h
ixgbe_type.h
ixgbe_x540.c
ixgbe.h
Makefile