Adrian Hunter 0f8d8ea64e mmc: Fixes for Dual Data Rate (DDR) support ... The DDR support patch needs the following fixes: - The block driver does not need to know about DDR, any more than it needs to know about bus width. - Not only the card must be switched to DDR mode. The host controller must also be configured, which is done through the 'set_ios()' function. - Do not set the DDR mode state until after the switch command is successful. - Setting block length is not supported in DDR mode. Make that a core function and change the other place it is used (mmc_test) also. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>		2010-10-23 21:11:16 +08:00
..
card.h	mmc: MMC 4.4 DDR support	2010-10-23 21:11:16 +08:00
core.h	mmc: Fixes for Dual Data Rate (DDR) support	2010-10-23 21:11:16 +08:00
host.h	mmc: Fixes for Dual Data Rate (DDR) support	2010-10-23 21:11:16 +08:00
mmc.h	mmc: MMC 4.4 DDR support	2010-10-23 21:11:16 +08:00
pm.h	sdio: introduce API for special power management features	2010-03-06 11:26:36 -08:00
sd.h	mmc: add erase, secure erase, trim and secure trim operations	2010-08-12 08:43:30 -07:00
sdhci-spear.h	sdhci-spear: ST SPEAr based SDHCI controller glue	2010-05-27 09:12:40 -07:00
sdio_func.h	sdio: add new function for RAW (Read after Write) operation	2010-05-27 09:12:40 -07:00
sdio_ids.h	wimax/iwmc3200: add new sdio device ID to support iwmc3200 2.5GHz sku	2009-10-19 15:55:59 +09:00
sdio.h	mmc: avoid getting CID on SDIO-only cards	2010-09-09 18:57:22 -07:00
sh_mmcif.h	sh: add boot code to MMCIF driver header	2010-05-31 13:11:47 +09:00