mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2025-11-07 19:43:52 +00:00
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
switch a memory area between guest_memfd and regular anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new guest_memfd
and page attributes infrastructure. This is mostly useful for testing,
since there is no pKVM-like infrastructure to provide a meaningfully
reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually care
about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a stable TSC",
because some of them don't expect the "TSC stable" bit (added to the pvclock
ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- On AMD machines with vNMI, always rely on hardware instead of intercepting
IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing flag
in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix the
various bugs that were lurking due to lack of said annotation.
There are two non-KVM patches buried in the middle of guest_memfd support:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
=66Ws
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
350 lines
8.6 KiB
C
350 lines
8.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/* KVM paravirtual clock driver. A clocksource implementation
|
|
Copyright (C) 2008 Glauber de Oliveira Costa, Red Hat Inc.
|
|
*/
|
|
|
|
#include <linux/clocksource.h>
|
|
#include <linux/kvm_para.h>
|
|
#include <asm/pvclock.h>
|
|
#include <asm/msr.h>
|
|
#include <asm/apic.h>
|
|
#include <linux/percpu.h>
|
|
#include <linux/hardirq.h>
|
|
#include <linux/cpuhotplug.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/sched/clock.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/set_memory.h>
|
|
#include <linux/cc_platform.h>
|
|
|
|
#include <asm/hypervisor.h>
|
|
#include <asm/x86_init.h>
|
|
#include <asm/kvmclock.h>
|
|
|
|
static int kvmclock __initdata = 1;
|
|
static int kvmclock_vsyscall __initdata = 1;
|
|
static int msr_kvm_system_time __ro_after_init;
|
|
static int msr_kvm_wall_clock __ro_after_init;
|
|
static u64 kvm_sched_clock_offset __ro_after_init;
|
|
|
|
static int __init parse_no_kvmclock(char *arg)
|
|
{
|
|
kvmclock = 0;
|
|
return 0;
|
|
}
|
|
early_param("no-kvmclock", parse_no_kvmclock);
|
|
|
|
static int __init parse_no_kvmclock_vsyscall(char *arg)
|
|
{
|
|
kvmclock_vsyscall = 0;
|
|
return 0;
|
|
}
|
|
early_param("no-kvmclock-vsyscall", parse_no_kvmclock_vsyscall);
|
|
|
|
/* Aligned to page sizes to match what's mapped via vsyscalls to userspace */
|
|
#define HVC_BOOT_ARRAY_SIZE \
|
|
(PAGE_SIZE / sizeof(struct pvclock_vsyscall_time_info))
|
|
|
|
static struct pvclock_vsyscall_time_info
|
|
hv_clock_boot[HVC_BOOT_ARRAY_SIZE] __bss_decrypted __aligned(PAGE_SIZE);
|
|
static struct pvclock_wall_clock wall_clock __bss_decrypted;
|
|
static struct pvclock_vsyscall_time_info *hvclock_mem;
|
|
DEFINE_PER_CPU(struct pvclock_vsyscall_time_info *, hv_clock_per_cpu);
|
|
EXPORT_PER_CPU_SYMBOL_GPL(hv_clock_per_cpu);
|
|
|
|
/*
|
|
* The wallclock is the time of day when we booted. Since then, some time may
|
|
* have elapsed since the hypervisor wrote the data. So we try to account for
|
|
* that with system time
|
|
*/
|
|
static void kvm_get_wallclock(struct timespec64 *now)
|
|
{
|
|
wrmsrl(msr_kvm_wall_clock, slow_virt_to_phys(&wall_clock));
|
|
preempt_disable();
|
|
pvclock_read_wallclock(&wall_clock, this_cpu_pvti(), now);
|
|
preempt_enable();
|
|
}
|
|
|
|
static int kvm_set_wallclock(const struct timespec64 *now)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
|
|
static u64 kvm_clock_read(void)
|
|
{
|
|
u64 ret;
|
|
|
|
preempt_disable_notrace();
|
|
ret = pvclock_clocksource_read_nowd(this_cpu_pvti());
|
|
preempt_enable_notrace();
|
|
return ret;
|
|
}
|
|
|
|
static u64 kvm_clock_get_cycles(struct clocksource *cs)
|
|
{
|
|
return kvm_clock_read();
|
|
}
|
|
|
|
static noinstr u64 kvm_sched_clock_read(void)
|
|
{
|
|
return pvclock_clocksource_read_nowd(this_cpu_pvti()) - kvm_sched_clock_offset;
|
|
}
|
|
|
|
static inline void kvm_sched_clock_init(bool stable)
|
|
{
|
|
if (!stable)
|
|
clear_sched_clock_stable();
|
|
kvm_sched_clock_offset = kvm_clock_read();
|
|
paravirt_set_sched_clock(kvm_sched_clock_read);
|
|
|
|
pr_info("kvm-clock: using sched offset of %llu cycles",
|
|
kvm_sched_clock_offset);
|
|
|
|
BUILD_BUG_ON(sizeof(kvm_sched_clock_offset) >
|
|
sizeof(((struct pvclock_vcpu_time_info *)NULL)->system_time));
|
|
}
|
|
|
|
/*
|
|
* If we don't do that, there is the possibility that the guest
|
|
* will calibrate under heavy load - thus, getting a lower lpj -
|
|
* and execute the delays themselves without load. This is wrong,
|
|
* because no delay loop can finish beforehand.
|
|
* Any heuristics is subject to fail, because ultimately, a large
|
|
* poll of guests can be running and trouble each other. So we preset
|
|
* lpj here
|
|
*/
|
|
static unsigned long kvm_get_tsc_khz(void)
|
|
{
|
|
setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
|
|
return pvclock_tsc_khz(this_cpu_pvti());
|
|
}
|
|
|
|
static void __init kvm_get_preset_lpj(void)
|
|
{
|
|
unsigned long khz;
|
|
u64 lpj;
|
|
|
|
khz = kvm_get_tsc_khz();
|
|
|
|
lpj = ((u64)khz * 1000);
|
|
do_div(lpj, HZ);
|
|
preset_lpj = lpj;
|
|
}
|
|
|
|
bool kvm_check_and_clear_guest_paused(void)
|
|
{
|
|
struct pvclock_vsyscall_time_info *src = this_cpu_hvclock();
|
|
bool ret = false;
|
|
|
|
if (!src)
|
|
return ret;
|
|
|
|
if ((src->pvti.flags & PVCLOCK_GUEST_STOPPED) != 0) {
|
|
src->pvti.flags &= ~PVCLOCK_GUEST_STOPPED;
|
|
pvclock_touch_watchdogs();
|
|
ret = true;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int kvm_cs_enable(struct clocksource *cs)
|
|
{
|
|
vclocks_set_used(VDSO_CLOCKMODE_PVCLOCK);
|
|
return 0;
|
|
}
|
|
|
|
struct clocksource kvm_clock = {
|
|
.name = "kvm-clock",
|
|
.read = kvm_clock_get_cycles,
|
|
.rating = 400,
|
|
.mask = CLOCKSOURCE_MASK(64),
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
.enable = kvm_cs_enable,
|
|
};
|
|
EXPORT_SYMBOL_GPL(kvm_clock);
|
|
|
|
static void kvm_register_clock(char *txt)
|
|
{
|
|
struct pvclock_vsyscall_time_info *src = this_cpu_hvclock();
|
|
u64 pa;
|
|
|
|
if (!src)
|
|
return;
|
|
|
|
pa = slow_virt_to_phys(&src->pvti) | 0x01ULL;
|
|
wrmsrl(msr_kvm_system_time, pa);
|
|
pr_debug("kvm-clock: cpu %d, msr %llx, %s", smp_processor_id(), pa, txt);
|
|
}
|
|
|
|
static void kvm_save_sched_clock_state(void)
|
|
{
|
|
}
|
|
|
|
static void kvm_restore_sched_clock_state(void)
|
|
{
|
|
kvm_register_clock("primary cpu clock, resume");
|
|
}
|
|
|
|
#ifdef CONFIG_X86_LOCAL_APIC
|
|
static void kvm_setup_secondary_clock(void)
|
|
{
|
|
kvm_register_clock("secondary cpu clock");
|
|
}
|
|
#endif
|
|
|
|
void kvmclock_disable(void)
|
|
{
|
|
if (msr_kvm_system_time)
|
|
native_write_msr(msr_kvm_system_time, 0, 0);
|
|
}
|
|
|
|
static void __init kvmclock_init_mem(void)
|
|
{
|
|
unsigned long ncpus;
|
|
unsigned int order;
|
|
struct page *p;
|
|
int r;
|
|
|
|
if (HVC_BOOT_ARRAY_SIZE >= num_possible_cpus())
|
|
return;
|
|
|
|
ncpus = num_possible_cpus() - HVC_BOOT_ARRAY_SIZE;
|
|
order = get_order(ncpus * sizeof(*hvclock_mem));
|
|
|
|
p = alloc_pages(GFP_KERNEL, order);
|
|
if (!p) {
|
|
pr_warn("%s: failed to alloc %d pages", __func__, (1U << order));
|
|
return;
|
|
}
|
|
|
|
hvclock_mem = page_address(p);
|
|
|
|
/*
|
|
* hvclock is shared between the guest and the hypervisor, must
|
|
* be mapped decrypted.
|
|
*/
|
|
if (cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT)) {
|
|
r = set_memory_decrypted((unsigned long) hvclock_mem,
|
|
1UL << order);
|
|
if (r) {
|
|
__free_pages(p, order);
|
|
hvclock_mem = NULL;
|
|
pr_warn("kvmclock: set_memory_decrypted() failed. Disabling\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
memset(hvclock_mem, 0, PAGE_SIZE << order);
|
|
}
|
|
|
|
static int __init kvm_setup_vsyscall_timeinfo(void)
|
|
{
|
|
if (!kvm_para_available() || !kvmclock || nopv)
|
|
return 0;
|
|
|
|
kvmclock_init_mem();
|
|
|
|
#ifdef CONFIG_X86_64
|
|
if (per_cpu(hv_clock_per_cpu, 0) && kvmclock_vsyscall) {
|
|
u8 flags;
|
|
|
|
flags = pvclock_read_flags(&hv_clock_boot[0].pvti);
|
|
if (!(flags & PVCLOCK_TSC_STABLE_BIT))
|
|
return 0;
|
|
|
|
kvm_clock.vdso_clock_mode = VDSO_CLOCKMODE_PVCLOCK;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
early_initcall(kvm_setup_vsyscall_timeinfo);
|
|
|
|
static int kvmclock_setup_percpu(unsigned int cpu)
|
|
{
|
|
struct pvclock_vsyscall_time_info *p = per_cpu(hv_clock_per_cpu, cpu);
|
|
|
|
/*
|
|
* The per cpu area setup replicates CPU0 data to all cpu
|
|
* pointers. So carefully check. CPU0 has been set up in init
|
|
* already.
|
|
*/
|
|
if (!cpu || (p && p != per_cpu(hv_clock_per_cpu, 0)))
|
|
return 0;
|
|
|
|
/* Use the static page for the first CPUs, allocate otherwise */
|
|
if (cpu < HVC_BOOT_ARRAY_SIZE)
|
|
p = &hv_clock_boot[cpu];
|
|
else if (hvclock_mem)
|
|
p = hvclock_mem + cpu - HVC_BOOT_ARRAY_SIZE;
|
|
else
|
|
return -ENOMEM;
|
|
|
|
per_cpu(hv_clock_per_cpu, cpu) = p;
|
|
return p ? 0 : -ENOMEM;
|
|
}
|
|
|
|
void __init kvmclock_init(void)
|
|
{
|
|
u8 flags;
|
|
|
|
if (!kvm_para_available() || !kvmclock)
|
|
return;
|
|
|
|
if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE2)) {
|
|
msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW;
|
|
msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW;
|
|
} else if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) {
|
|
msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
|
|
msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
|
|
} else {
|
|
return;
|
|
}
|
|
|
|
if (cpuhp_setup_state(CPUHP_BP_PREPARE_DYN, "kvmclock:setup_percpu",
|
|
kvmclock_setup_percpu, NULL) < 0) {
|
|
return;
|
|
}
|
|
|
|
pr_info("kvm-clock: Using msrs %x and %x",
|
|
msr_kvm_system_time, msr_kvm_wall_clock);
|
|
|
|
this_cpu_write(hv_clock_per_cpu, &hv_clock_boot[0]);
|
|
kvm_register_clock("primary cpu clock");
|
|
pvclock_set_pvti_cpu0_va(hv_clock_boot);
|
|
|
|
if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE_STABLE_BIT))
|
|
pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT);
|
|
|
|
flags = pvclock_read_flags(&hv_clock_boot[0].pvti);
|
|
kvm_sched_clock_init(flags & PVCLOCK_TSC_STABLE_BIT);
|
|
|
|
x86_platform.calibrate_tsc = kvm_get_tsc_khz;
|
|
x86_platform.calibrate_cpu = kvm_get_tsc_khz;
|
|
x86_platform.get_wallclock = kvm_get_wallclock;
|
|
x86_platform.set_wallclock = kvm_set_wallclock;
|
|
#ifdef CONFIG_X86_LOCAL_APIC
|
|
x86_cpuinit.early_percpu_clock_init = kvm_setup_secondary_clock;
|
|
#endif
|
|
x86_platform.save_sched_clock_state = kvm_save_sched_clock_state;
|
|
x86_platform.restore_sched_clock_state = kvm_restore_sched_clock_state;
|
|
kvm_get_preset_lpj();
|
|
|
|
/*
|
|
* X86_FEATURE_NONSTOP_TSC is TSC runs at constant rate
|
|
* with P/T states and does not stop in deep C-states.
|
|
*
|
|
* Invariant TSC exposed by host means kvmclock is not necessary:
|
|
* can use TSC as clocksource.
|
|
*
|
|
*/
|
|
if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) &&
|
|
boot_cpu_has(X86_FEATURE_NONSTOP_TSC) &&
|
|
!check_tsc_unstable())
|
|
kvm_clock.rating = 299;
|
|
|
|
clocksource_register_hz(&kvm_clock, NSEC_PER_SEC);
|
|
pv_info.name = "KVM";
|
|
}
|