Harry Wentland 01dc285d5c drm/amd/display: Report non-DP display as disconnected without EDID ... [Why] Some boards seem to have a problem where HPD is high on HDMI even though no display is connected. We don't want to report these as connected. DP spec still requires us to report DP displays as connected when HPD is high but we can't read the EDID in order to go to fail-safe mode. [How] If connector_signal is not DP abort detection if we can't retrieve the EDID. v2: Add Bugzilla and stable Bugzilla: https://bugs.freedesktop.org/107390 Bugzilla: https://bugs.freedesktop.org/106846 Cc: stable@vger.kernel.org Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>		2018-08-03 10:14:09 -05:00
..
amdgpu_dm	drm/amd/display: Convert 10kHz clks from PPLib into kHz	2018-07-20 14:24:10 -05:00
dc	drm/amd/display: Report non-DP display as disconnected without EDID	2018-08-03 10:14:09 -05:00
include	drm/amd/display: read DP sink and DP branch hardware and firmware revision from DPCD	2018-07-13 14:48:49 -05:00
modules	drm/amd/display: Add headers for hardcoded 1d luts.	2018-07-16 16:11:48 -05:00
Kconfig	drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86	2018-07-19 13:56:43 -05:00
Makefile	drm/amd: Remove inclusion of non-existing include directories	2018-02-26 23:09:38 -05:00
TODO	drm/amd/display: Convert remaining loggers off dc_logger	2018-07-13 14:48:42 -05:00