In fact, this structure contains a flexible array at the end, but
historically its size, alignment etc., is calculated manually.
There are several instances of the structure embedded into other
structures, but also there's ongoing effort to remove them and we
could in the meantime declare &net_device properly.
Declare the array explicitly, use struct_size() and store the array
size inside the structure, so that __counted_by() can be applied.
Don't use PTR_ALIGN(), as SLUB itself tries its best to ensure the
allocated buffer is aligned to what the user expects.
Also, change its alignment from %NETDEV_ALIGN to the cacheline size
as per several suggestions on the netdev ML.
bloat-o-meter for vmlinux:
free_netdev 445 440 -5
netdev_freemem 24 - -24
alloc_netdev_mqs 1481 1450 -31
On x86_64 with several NICs of different vendors, I was never able to
get a &net_device pointer not aligned to the cacheline size after the
change.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20240710113036.2125584-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 31e0aa99dc ("ethtool: Veto some operations during firmware flashing process")
added a flag module_fw_flash_in_progress to struct net_device. As
this is ethtool related state, move it to the recently created
struct ethtool_netdev_state, accessed via the 'ethtool' member of
struct net_device.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240703121849.652893-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net_dev->ethtool is a pointer to new struct ethtool_netdev_state, which
currently contains only the wol_enabled field.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/293a562278371de7534ed1eb17531838ca090633.1719502239.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some operations cannot be performed during the firmware flashing
process.
For example:
- Port must be down during the whole flashing process to avoid packet loss
while committing reset for example.
- Writing to EEPROM interrupts the flashing process, so operations like
ethtool dump, module reset, get and set power mode should be vetoed.
- Split port firmware flashing should be vetoed.
In order to veto those scenarios, add a flag in 'struct net_device' that
indicates when a firmware flash is taking place on the module and use it
to prevent interruptions during the process.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NetDIM library, currently leveraged by an array of NICs, delivers
excellent acceleration benefits. Nevertheless, NICs vary significantly
in their dim profile list prerequisites.
Specifically, virtio-net backends may present diverse sw or hw device
implementation, making a one-size-fits-all parameter list impractical.
On Alibaba Cloud, the virtio DPU's performance under the default DIM
profile falls short of expectations, partly due to a mismatch in
parameter configuration.
I also noticed that ice/idpf/ena and other NICs have customized
profilelist or placed some restrictions on dim capabilities.
Motivated by this, I tried adding new params for "ethtool -C" that provides
a per-device control to modify and access a device's interrupt parameters.
Usage
========
The target NIC is named ethx.
Assume that ethx only declares support for rx profile setting
(with DIM_PROFILE_RX flag set in profile_flags) and supports modification
of usec and pkt fields.
1. Query the currently customized list of the device
$ ethtool -c ethx
...
rx-profile:
{.usec = 1, .pkts = 256, .comps = n/a,},
{.usec = 8, .pkts = 256, .comps = n/a,},
{.usec = 64, .pkts = 256, .comps = n/a,},
{.usec = 128, .pkts = 256, .comps = n/a,},
{.usec = 256, .pkts = 256, .comps = n/a,}
tx-profile: n/a
2. Tune
$ ethtool -C ethx rx-profile 1,1,n_2,n,n_3,3,n_4,4,n_n,5,n
"n" means do not modify this field.
$ ethtool -c ethx
...
rx-profile:
{.usec = 1, .pkts = 1, .comps = n/a,},
{.usec = 2, .pkts = 256, .comps = n/a,},
{.usec = 3, .pkts = 3, .comps = n/a,},
{.usec = 4, .pkts = 4, .comps = n/a,},
{.usec = 256, .pkts = 5, .comps = n/a,}
tx-profile: n/a
3. Hint
If the device does not support some type of customized dim profiles,
the corresponding "n/a" will display.
If the "n/a" field is being modified, -EOPNOTSUPP will be reported.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240621101353.107425-4-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
softnet_data::process_queue is a per-CPU variable and relies on disabled
BH for its locking. Without per-CPU locking in local_bh_disable() on
PREEMPT_RT this data structure requires explicit locking.
softnet_data::input_queue_head can be updated lockless. This is fine
because this value is only update CPU local by the local backlog_napi
thread.
Add a local_lock_t to softnet_data and use local_lock_nested_bh() for locking
of process_queue. This change adds only lockdep coverage and does not
alter the functional behaviour for !PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-11-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Softirq is preemptible on PREEMPT_RT. Without a per-CPU lock in
local_bh_disable() there is no guarantee that only one device is
transmitting at a time.
With preemption and multiple senders it is possible that the per-CPU
`recursion' counter gets incremented by different threads and exceeds
XMIT_RECURSION_LIMIT leading to a false positive recursion alert.
The `more' member is subject to similar problems if set by one thread
for one driver and wrongly used by another driver within another thread.
Instead of adding a lock to protect the per-CPU variable it is simpler
to make xmit per-task. Sending and receiving skbs happens always
in thread context anyway.
Having a lock to protected the per-CPU counter would block/ serialize two
sending threads needlessly. It would also require a recursive lock to
ensure that the owner can increment the counter further.
Make the softnet_data.xmit a task_struct member on PREEMPT_RT. Add
needed wrapper.
Cc: Ben Segall <bsegall@google.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-9-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This declaration was added to the header to be called from ethtool.
ethtool is separated from core for code organization but it is not really
a separate entity, it controls very core things.
As ethtool is an internal stuff it is not wise to have it in netdevice.h.
Move the declaration to net/core/dev.h instead.
Remove the EXPORT_SYMBOL_GPL call as ethtool can not be built as a module.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240612-feature_ptp_netnext-v15-2-b2a086257b63@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I find the behavior of xa_for_each_start() slightly counter-intuitive.
It doesn't end the iteration by making the index point after the last
element. IOW calling xa_for_each_start() again after it "finished"
will run the body of the loop for the last valid element, instead
of doing nothing.
This works fine for netlink dumps if they terminate correctly
(i.e. coalesce or carefully handle NLM_DONE), but as we keep getting
reminded legacy dumps are unlikely to go away.
Fixing this generically at the xa_for_each_start() level seems hard -
there is no index reserved for "end of iteration".
ifindexes are 31b wide, tho, and iterator is ulong so for
for_each_netdev_dump() it's safe to go to the next element.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pcpu_sw_netstats and pcpu_lstats structs both contain a set of
u64_stats_t fields for individual stats, but pcpu_dstats uses u64s
instead.
Make this consistent by using u64_stats_t across all stats types.
The per-cpu dstats are only used by the vrf driver at present, so update
that driver as part of this change.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607-dstats-v3-1-cc781fe116f7@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This API enables the net stack to reset the queues used for devmem TCP.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Shailend Chand <shailend@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We will convert ioctl(SIOCGARP) to RCU, and then we need to copy
dev->name which is currently protected by rtnl_lock().
This patch does the following:
1) Add seqlock netdev_rename_lock to protect dev->name
2) Add netdev_copy_name() that copies dev->name to buffer
under netdev_rename_lock
3) Use netdev_copy_name() in netdev_get_name() and drop
devnet_rename_sem
Suggested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/CANn89iJEWs7AYSJqGCUABeVqOCTkErponfZdT5kV-iD=-SajnQ@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240430015813.71143-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is impossible to use init_dummy_netdev together with alloc_netdev()
as the 'setup' argument.
This is because alloc_netdev() initializes some fields in the net_device
structure, and later init_dummy_netdev() memzero them all. This causes
some problems as reported here:
https://lore.kernel.org/all/20240322082336.49f110cc@kernel.org/
Split the init_dummy_netdev() function in two. Create a new function called
init_dummy_netdev_core() that does not memzero the net_device structure.
Then have init_dummy_netdev() memzero-ing and calling
init_dummy_netdev_core(), keeping the old behaviour.
init_dummy_netdev_core() is the new function that could be called as an
argument for alloc_netdev().
Also, create a helper to allocate and initialize dummy net devices,
leveraging init_dummy_netdev_core() as the setup argument. This function
basically simplify the allocation of dummy devices, by allocating and
initializing it. Freeing the device continue to be done through
free_netdev()
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.
With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.
The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.
Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.
The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.
This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.
The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to. The PHY index can be
re-used for PHYs that are persistent.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
For short netdev holds within a function there are still a lot of
users of dev_put() rather than netdev_put(). Add DEFINE_FREE() to
allow making those safer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 14d898f3c1 ("dev: Move received_rps counter next
to RPS members in softnet data") was unfortunate:
received_rps is dirtied by a cpu and never read by other
cpus in fast path.
Its presence in the hot RPS cache line (shared by many cpus)
is hurting RPS/RFS performance.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
input_queue_tail_incr_save() is incrementing the sd queue_tail
and save it in the flow last_qtail.
Two issues here :
- no lock protects the write on last_qtail, we should use appropriate
annotations.
- We can perform this write after releasing the per-cpu backlog lock,
to decrease this lock hold duration (move away the cache line miss)
Also move input_queue_head_incr() and rps helpers to include/net/rps.h,
while adding rps_ prefix to better reflect their role.
v2: Fixed a build issue (Jakub and kernel build bots)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If under extreme cpu backlog pressure enqueue_to_backlog() has
to drop a packet, it could do this without dirtying a cache line
and potentially slowing down the target cpu.
Move sd->dropped into a separate cache line, and make it atomic.
In non pressure mode, this field is not touched, no need to consume
valuable space in a hot cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move dev_xmit_recursion() and friends to net/core/dev.h
They are only used from net/core/dev.c and net/core/filter.c.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kick_defer_list_purge() is defined in net/core/dev.c
and used from net/core/skubff.c
Because we need softnet_data, include <linux/netdevice.h>
from net/core/dev.h
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure
to store params inside the kernel, IPv4 tunnel code uses the same
ip_tunnel_parm which is being used to talk with the userspace.
This makes it difficult to alter or add any fields or use a
different format for whatever data.
Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for
now, and use it throughout the code. Define the pieces, where the copy
user <-> kernel happens, as standalone functions, and copy the data
there field-by-field, so that the kernel-side structure could be easily
modified later on and the users wouldn't have to care about this.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The defer_list is a per-CPU list which is used to free skbs outside of
the socket lock and on the CPU on which they have been allocated.
The list is processed during NAPI callbacks so ideally the list is
cleaned up.
Should the amount of skbs on the list exceed a certain water mark then
the softirq is triggered remotely on the target CPU by invoking a remote
function call. The raise of the softirqs via a remote function call
leads to waking the ksoftirqd on PREEMPT_RT which is undesired.
The backlog-NAPI threads already provide the infrastructure which can be
utilized to perform the cleanup of the defer_list.
The NAPI state is updated with the input_pkt_queue.lock acquired. It
order not to break the state, it is needed to also wake the backlog-NAPI
thread with the lock held. This requires to acquire the use the lock in
rps_lock_irq*() if the backlog-NAPI threads are used even with RPS
disabled.
Move the logic of remotely starting softirqs to clean up the defer_list
into kick_defer_list_purge(). Make sure a lock is held in
rps_lock_irq*() if backlog-NAPI threads are used. Schedule backlog-NAPI
for defer_list cleanup if backlog-NAPI is available.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dev->state can be read in rx and tx fast paths.
netif_running() which needs dev->state is called from
- enqueue_to_backlog() [RX path]
- __dev_direct_xmit() [TX path]
Fixes: 43a71cd66b ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240314200845.3050179-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move gro_find_receive_by_type() and gro_find_complete_by_type()
to include/net/gro.h where they belong.
Also use _NET_GRO_H instead of _NET_IPV6_GRO_H to protect
include/net/gro.h from multiple inclusions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240308102230.296224-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ethtool-nl family does a good job exposing various protocol
related and IEEE/IETF statistics which used to get dumped under
ethtool -S, with creative names. Queue stats don't have a netlink
API, yet, and remain a lion's share of ethtool -S output for new
drivers. Not only is that bad because the names differ driver to
driver but it's also bug-prone. Intuitively drivers try to report
only the stats for active queues, but querying ethtool stats
involves multiple system calls, and the number of stats is
read separately from the stats themselves. Worse still when user
space asks for values of the stats, it doesn't inform the kernel
how big the buffer is. If number of stats increases in the meantime
kernel will overflow user buffer.
Add a netlink API for dumping queue stats. Queue information is
exposed via the netdev-genl family, so add the stats there.
Support per-queue and sum-for-device dumps. Latter will be useful
when subsequent patches add more interesting common stats than
just bytes and packets.
The API does not currently distinguish between HW and SW stats.
The expectation is that the source of the stats will either not
matter much (good packets) or be obvious (skb alloc errors).
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move RPS related structures and helpers from include/linux/netdevice.h
and include/net/sock.h to a new include file.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-18-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev_rx_weight is read from process_backlog().
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev_tx_weight is used in tx fast path.
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_max_backlog is used in rx fat path.
Move it to net_hodata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ptype_all is used in rx/tx fast paths.
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of spreading networking critical fields
all over the places, add a custom net_hotdata
structure so that we can precisely control its layout.
In this first patch, move :
- gro_normal_batch used in rx (GRO stack)
- offload_base used in rx and tx (GRO and TSO stacks)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Older versions of GCC really want to know the full definition
of the type involved in rcu_assign_pointer().
struct dpll_pin is defined in a local header, net/core can't
reach it. Move all the netdev <> dpll code into dpll, where
the type is known. Otherwise we'd need multiple function calls
to jump between the compilation units.
This is the same problem the commit under fixes was trying to address,
but with rcu_assign_pointer() not rcu_dereference().
Some of the exports are not needed, networking core can't
be a module, we only need exports for the helpers used by
drivers.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/35a869c8-52e8-177-1d4d-e57578b99b6@linux-m68k.org/
Fixes: 640f41ed33 ("dpll: fix build failure due to rcu_dereference_check() on unknown type")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240305013532.694866-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is now possible to disable BQL, but that causes the cpsw driver to break:
drivers/net/ethernet/ti/am65-cpsw-nuss.c:297:28: error: no member named 'dql' in 'struct netdev_queue'
297 | dql_avail(&netif_txq->dql),
There is already a helper function in net/sch_generic.h that could
be used to help here. Move its implementation into the common
linux/netdevice.h along with the other bql interfaces and change
both users over to the new interface.
Fixes: ea7f3cfaa5 ("net: bql: allow the config to be disabled")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a possible UAF in if_nlmsg_size(),
which can run without RTNL.
Add rcu protection to "struct dpll_pin"
Move netdev_dpll_pin() from netdevice.h to dpll.h to
decrease name pollution.
Note: This looks possible to no longer acquire RTNL in
netdev_dpll_pin_assign() later in net-next.
v2: do not force rcu_read_lock() in rtnl_dpll_pin_size() (Jiri Pirko)
Fixes: 5f18426928 ("netdev: expose DPLL pin handle for netdevice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223123208.3543319-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We want to use RCU protection instead of RTNL
for inet6_fill_ifinfo().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_base_lock is not needed anymore, all remaining users also hold RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_base_lock is going away, add netdev_set_operstate() helper
so that hsr does not have to know core internals.
Remove dev_base_lock acquisition from rfc2863_policy()
v3: use an "unsigned int" for dev->operstate,
so that try_cmpxchg() can work on all arches.
( https://lore.kernel.org/oe-kbuild-all/202402081918.OLyGaea3-lkp@intel.com/ )
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepares things so that dev->reg_state reads can be lockless,
by adding WRITE_ONCE() on write side.
READ_ONCE()/WRITE_ONCE() do not support bitfields.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rely on skb pointer reference instead of the skb pointer in do_xdp_generic
and netif_receive_generic_xdp routine signatures.
This is a preliminary patch to add multi-buff support for xdp running in
generic mode where we will need to reallocate the skb to avoid
linearization and we will need to make it visible to do_xdp_generic()
caller.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c09415b1f48c8620ef4d76deed35050a7bddf7c2.1707729884.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev->lstats is notably used from loopback ndo_start_xmit()
and other virtual drivers.
Per cpu stats updates are dirtying per-cpu data,
but the pointer itself is read-only.
Fixes: 43a71cd66b ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) IPSec global stats for xfrm and mlx5
2) XSK memory improvements for non-linear SKBs
3) Software steering debug dump to use seq_file ops
4) Various code clean-ups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmXBgUEACgkQSD+KveBX
+j4qmQgAr5pNBUkxyylEKU0cB8kh21LaOzimVjpGrKCzPtb/Fz8h6E1h668icpFy
2G4iuyJ2/doA0Bn4FJC730i6Xk2sqkXiY85yclvMPObS7b0PckD72d6iH9UfzfYB
Vof1lg3HdVvTq1KhJ1T/sCEB2skBLzEGV/fZWmL39zPaxM9JfHA2o5xDxdW7/GhT
0LPg84MinikoKbfw9m45l2zp52yTRrLzTUbDubwXFC4Ltg/yM4uAsbTArQzA8VJ9
q95XGZ0ZmZDFsVbjp9suCJFaTVrKmh2yy16a3BpKpm72L+K8yciUTqcqDd5vH2wW
CQ0eKMqBtB8c1Jr16oKfQ42NFF0FIQ==
=0IjR
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2024-02-01
1) IPSec global stats for xfrm and mlx5
2) XSK memory improvements for non-linear SKBs
3) Software steering debug dump to use seq_file ops
4) Various code clean-ups
* tag 'mlx5-updates-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: XDP, Exclude headroom and tailroom from memory calculations
net/mlx5e: XSK, Exclude tailroom from non-linear SKBs memory calculations
net/mlx5: DR, Change SWS usage to debug fs seq_file interface
net/mlx5: Change missing SyncE capability print to debug
net/mlx5: Remove initial segmentation duplicate definitions
net/mlx5: Return specific error code for timeout on wait_fw_init
net/mlx5: SF, Stop waiting for FW as teardown was called
net/mlx5: remove fw reporter dump option for non PF
net/mlx5: remove fw_fatal reporter dump option for non PF
net/mlx5: Rename mlx5_sf_dev_remove
Documentation: Fix counter name of mlx5 vnic reporter
net/mlx5e: Delete obsolete IPsec code
net/mlx5e: Connect mlx5 IPsec statistics with XFRM core
xfrm: get global statistics from the offloaded device
xfrm: generalize xdo_dev_state_update_curlft to allow statistics update
====================
Link: https://lore.kernel.org/r/20240206005527.1353368-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
init_dummy_netdev() always returns zero and all the callers do not check
the returned value. Set the function to not return value, as it is not
really used today.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240205103022.440946-1-amcohen@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to allow drivers to fill all statistics, change the name
of xdo_dev_state_update_curlft to be xdo_dev_state_update_stats.
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
xdp_prog is used in receive path, both from XDP enabled drivers
and from netif_elide_gro().
This patch also removes two 4-bytes holes.
Fixes: 43a71cd66b ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240102162220.750823-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
