When multi-plane is supported, a logical port, which is aggregation of
multiple physical plane ports, is exposed for data transmission.
Compared with a normal mlx5 IB port, this logical port supports all
functionalities except Subnet Management.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/7e37c06c9cb243be9ac79930cd17053903785b95.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The test of write combining was added before in mlx5_ib driver. It
opens UD QP and posts NOP WQEs, and uses BlueFlame doorbell. When
BlueFlame is used, WQEs get written directly to a PCI BAR of the
device (in addition to memory) so that the device handles them without
having to access memory.
In this test, the WQEs written in memory are different from the ones
written to the BlueFlame which request CQE update. By checking the
completion reports posted on CQ, we can know if BlueFlame succeeds or
not. The write combining must be supported if BlueFlame succeeds as
its register is written using write combining.
This patch reimplements the test in the same way, but using a pair of
SQ and CQ only. It is moved to mlx5_core as a general feature used by
both mlx5_core and mlx5_ib.
Besides, save write combine test result of the PCI function, so that
its thousands of child functions such as SF can query without paying
the time and resource penalty by itself. The test function is called
only after failing to get the cached result. With this enhancement,
all thousands of SFs of the PF attached to same driver no longer need
to perform WC check explicitly, which is already done in the system.
This saves several commands per SF, thereby speeds up SF creation and
also saves completion EQ creation.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/4ff5a8cc4c5b5b0d98397baa45a5019bcdbf096e.1717409369.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
MSIX irq allocation and free APIs are no longer
in use. Hence, remove the dead code.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20240512124306.740898-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds to mlx5 drivers support for 8 ports HCAs.
Starting with ConnectX-8 HCAs with 8 ports are possible.
As most driver parts aren't affected by such configuration most driver
code is unchanged.
Specially the only affected areas are:
- Lag
- Multiport E-Switch
- Single FDB E-Switch
All of the above are already factored in generic way, and LAG and VF LAG
are tested, so all that left is to change a #define and remove checks
which are no longer needed.
However, Multiport E-Switch is not tested yet, so it is left untouched.
This patch will allow to create hardware LAG/VF LAG when all 8 ports are
added to the same bond device.
for example, In order to activate the hardware lag a user can execute
the following:
ip link add bond0 type bond
ip link set bond0 type bond miimon 100 mode 2
ip link set eth2 master bond0
ip link set eth3 master bond0
ip link set eth4 master bond0
ip link set eth5 master bond0
ip link set eth6 master bond0
ip link set eth7 master bond0
ip link set eth8 master bond0
ip link set eth9 master bond0
Where eth2, eth3, eth4, eth5, eth6, eth7, eth8 and eth9 are the PFs of
the same HCA.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240512124306.740898-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prevent forced completion handling on an entry that has not yet been
assigned an index, causing an out of bounds access on idx = -22.
Instead of waiting indefinitely for the sem, blocking flow now waits for
index to be allocated or a sem acquisition timeout before beginning the
timer for FW completion.
Kernel log example:
mlx5_core 0000:06:00.0: wait_func_handle_exec_timeout:1128:(pid 185911): cmd[-22]: CREATE_UCTX(0xa04) No done completion
Fixes: 8e715cd613 ("net/mlx5: Set command entry semaphore up once got index free")
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240509112951.590184-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Have an actual mlx5_sd instance in the core device, and fix the getter
accordingly. This allows SD stuff to flow, the feature becomes supported
only here.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited commit moved the code of mlx5e_create_tises() and changed the
loop to create TISes over MLX5_MAX_PORTS constant value, instead of
getting the correct lag ports supported by the device, which can cause
FW errors on devices with less than MLX5_MAX_PORTS ports.
Change that back to mlx5e_get_num_lag_ports(mdev).
Also IPoIB interfaces create there own TISes, they don't use the eth
TISes, pass a flag to indicate that.
This fixes the following errors that might appear in kernel log:
mlx5_cmd_out_err:808:(pid 650): CREATE_TIS(0x912) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x595b5d), err(-22)
mlx5e_create_mdev_resources:174:(pid 650): alloc tises failed, -22
Fixes: b25bd37c85 ("net/mlx5: Move TISes from priv to mdev HW resources")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Small cycle, with some typical driver updates
- General code tidying in siw, hfi1, idrdma, usnic, hns rtrs and bnxt_re
- Many small siw cleanups without an overeaching theme
- Debugfs stats for hns
- Fix a TX queue timeout in IPoIB and missed locking of the mcast list
- Support more features of P7 devices in bnxt_re including a new work
submission protocol
- CQ interrupts for MANA
- netlink stats for erdma
- EFA multipath PCI support
- Fix Incorrect MR invalidation in iser
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZaCQDQAKCRCFwuHvBreF
YemEAQCTGebv0k2hbocDOmKml5awt8j9aDJX3aO7Zpfi0AYUtwEAzk+kgN4yAo+B
Vinvpu171zry+QvmGJsXv2mtZkXH6QY=
=HT3p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Small cycle, with some typical driver updates:
- General code tidying in siw, hfi1, idrdma, usnic, hns rtrs and
bnxt_re
- Many small siw cleanups without an overeaching theme
- Debugfs stats for hns
- Fix a TX queue timeout in IPoIB and missed locking of the mcast
list
- Support more features of P7 devices in bnxt_re including a new work
submission protocol
- CQ interrupts for MANA
- netlink stats for erdma
- EFA multipath PCI support
- Fix Incorrect MR invalidation in iser"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits)
RDMA/bnxt_re: Fix error code in bnxt_re_create_cq()
RDMA/efa: Add EFA query MR support
IB/iser: Prevent invalidating wrong MR
RDMA/erdma: Add hardware statistics support
RDMA/erdma: Introduce dma pool for hardware responses of CMDQ requests
IB/iser: iscsi_iser.h: fix kernel-doc warning and spellos
RDMA/mana_ib: Add CQ interrupt support for RAW QP
RDMA/mana_ib: query device capabilities
RDMA/mana_ib: register RDMA device with GDMA
RDMA/bnxt_re: Fix the sparse warnings
RDMA/bnxt_re: Fix the offset for GenP7 adapters for user applications
RDMA/bnxt_re: Share a page to expose per CQ info with userspace
RDMA/bnxt_re: Add UAPI to share a page with user space
IB/ipoib: Fix mcast list locking
RDMA/mlx5: Expose register c0 for RDMA device
net/mlx5: E-Switch, expose eswitch manager vport
net/mlx5: Manage ICM type of SW encap
RDMA/mlx5: Support handling of SW encap ICM area
net/mlx5: Introduce indirect-sw-encap ICM properties
RDMA/bnxt_re: Adds MSN table capability for Gen P7 adapters
...
Revert "net/mlx5: Implement management PF Ethernet profile"
This reverts commit 22c4640698.
Revert "net/mlx5: Enable SD feature"
This reverts commit c88c49ac9c.
Revert "net/mlx5e: Block TLS device offload on combined SD netdev"
This reverts commit 83a59ce005.
Revert "net/mlx5e: Support per-mdev queue counter"
This reverts commit d72baceb92.
Revert "net/mlx5e: Support cross-vhca RSS"
This reverts commit c73a3ab8fa.
Revert "net/mlx5e: Let channels be SD-aware"
This reverts commit e4f9686bde.
Revert "net/mlx5e: Create EN core HW resources for all secondary devices"
This reverts commit c4fb94aa82.
Revert "net/mlx5e: Create single netdev per SD group"
This reverts commit e2578b4f98.
Revert "net/mlx5: SD, Add informative prints in kernel log"
This reverts commit c82d360325.
Revert "net/mlx5: SD, Implement steering for primary and secondaries"
This reverts commit 605fcce33b.
Revert "net/mlx5: SD, Implement devcom communication and primary election"
This reverts commit a45af9a967.
Revert "net/mlx5: SD, Implement basic query and instantiation"
This reverts commit 63b9ce944c.
Revert "net/mlx5: SD, Introduce SD lib"
This reverts commit 4a04a31f49.
Revert "net/mlx5: Fix query of sd_group field"
This reverts commit e04984a373.
Revert "net/mlx5e: Use the correct lag ports number when creating TISes"
This reverts commit a7e7b40c4b.
There are some unanswered questions on the list, and we don't
have any docs. Given the lack of replies so far and the fact
that v6.8 merge window has started - let's revert this and
revisit for v6.9.
Link: https://lore.kernel.org/all/20231221005721.186607-1-saeed@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add management PF modules, which introduce support for the structures
needed to create the resources for the MGMT PF to work.
Also, add the necessary calls and functions to establish this
functionality.
Signed-off-by: Armen Ratner <armeng@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
Have an actual mlx5_sd instance in the core device, and fix the getter
accordingly. This allows SD stuff to flow, the feature becomes supported
only here.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited commit moved the code of mlx5e_create_tises() and changed the
loop to create TISes over MLX5_MAX_PORTS constant value, instead of
getting the correct lag ports supported by the device, which can cause
FW errors on devices with less than MLX5_MAX_PORTS ports.
Change that back to mlx5e_get_num_lag_ports(mdev).
Also IPoIB interfaces create there own TISes, they don't use the eth
TISes, pass a flag to indicate that.
Fixes: b25bd37c85 ("net/mlx5: Move TISes from priv to mdev HW resources")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The transport interface send (TIS) object is responsible for performing
all transport related operations of the transmit side. Messages from
Send Queues get segmented and transmitted by the TIS including all
transport required implications, e.g. in the case of large send offload,
the TIS is responsible for the segmentation.
These are stateless objects and can be used by multiple netdevs (e.g.
representors) who share the same core device.
Providing the TISes as a service from the core layer to the netdev layer
reduces the number of replecated TIS objects (in case of multiple
netdevs), and will ease the transition to netdev with multiple mdevs.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
MPIR register allows to query the PCIe indexes
and Socket-Direct related parameters.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Commit 2ac9cfe782 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path")
declared mlx5e_ipsec_inverse_table_init() but never implemented it.
Commit f52f2faee5 ("net/mlx5e: Introduce flow steering API")
declared mlx5e_fs_set_tc() but never implemented it.
Commit f2f3df5501 ("net/mlx5: EQ, Privatize eq_table and friends")
declared mlx5_eq_comp_cpumask() but never implemented it.
Commit cac1eb2cf2 ("net/mlx5: Lag, properly lock eswitch if needed")
removed mlx5_lag_update() but not its declaration.
Commit 35ba005d82 ("net/mlx5: DR, Set flex parser for TNL_MPLS dynamically")
removed mlx5dr_ste_build_tnl_mpls() but not its declaration.
Commit e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
declared but never implemented mlx5_alloc_cmd_mailbox_chain() and mlx5_free_cmd_mailbox_chain().
Commit 0cf53c1247 ("net/mlx5: FWPage, Use async events chain")
removed mlx5_core_req_pages_handler() but not its declaration.
Commit 938fe83c8d ("net/mlx5_core: New device capabilities handling")
removed mlx5_query_odp_caps() but not its declaration.
Commit f6a8a19bb1 ("RDMA/netdev: Hoist alloc_netdev_mqs out of the driver")
removed mlx5_rdma_netdev_alloc() but not its declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
LAG peer device lookout bus logic required the usage of global lock,
mlx5_intf_mutex.
As part of the effort to remove this global lock, refactor LAG peer
device lookout to use mlx5 devcom layer.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
At present, mlx5 driver have a general purpose
event handler which not only handles vhca event
but also many other events. This incurs a huge
bottleneck because the event handler is
implemented by single threaded workqueue and all
events are forced to be handled in serial manner
even though application tries to create multiple
SFs simultaneously.
Introduce a dedicated vhca event handler which
manages SFs parallel creation.
Signed-off-by: Wei Zhang <weizhang@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Leon Romanovsky says:
====================
This PR is collected from
https://lore.kernel.org/all/cover.1695296682.git.leon@kernel.org
This series from Patrisious extends mlx5 to support IPsec packet offload
in multiport devices (MPV, see [1] for more details).
These devices have single flow steering logic and two netdev interfaces,
which require extra logic to manage IPsec configurations as they performed
on netdevs.
[1] https://lore.kernel.org/linux-rdma/20180104152544.28919-1-leon@kernel.org/
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Handle IPsec steering upon master unbind/bind
net/mlx5: Configure IPsec steering for ingress RoCEv2 MPV traffic
net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic
net/mlx5: Add create alias flow table function to ipsec roce
net/mlx5: Implement alias object allow and create functions
net/mlx5: Add alias flow table bits
net/mlx5: Store devcom pointer inside IPsec RoCE
net/mlx5: Register mlx5e priv to devcom in MPV mode
RDMA/mlx5: Send events from IB driver about device affiliation state
net/mlx5: Introduce ifc bits for migration in a chunk mode
====================
Link: https://lore.kernel.org/r/20231002083832.19746-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Send blocking events from IB driver whenever the device is done being
affiliated or if it is removed from an affiliation.
This is useful since now the EN driver can register to those event and
know when a device is affiliated or not.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/a7491c3e483cfd8d962f5f75b9a25f253043384a.1695296682.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement SyncE support using newly introduced DPLL support.
Make sure that each PFs/VFs/SFs probed with appropriate capability
will spawn a dpll auxiliary device and register appropriate dpll device
and pin instances.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlx5 HW can't perform IPsec offload operation simultaneously both on PF
and VFs at the same time. While the previous patches added devlink knobs
to change IPsec capabilities dynamically, there is a need to add a logic
to block such IPsec capabilities for the cases when IPsec is already
configured.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leon Romanovsky says:
====================
mlx5 MACsec RoCEv2 support
From Patrisious:
This series extends previously added MACsec offload support
to cover RoCE traffic either.
In order to achieve that, we need configure MACsec with offload between
the two endpoints, like below:
REMOTE_MAC=10:70:fd:43:71:c0
* ip addr add 1.1.1.1/16 dev eth2
* ip link set dev eth2 up
* ip link add link eth2 macsec0 type macsec encrypt on
* ip macsec offload macsec0 mac
* ip macsec add macsec0 tx sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16
* ip macsec add macsec0 rx port 1 address $REMOTE_MAC
* ip macsec add macsec0 rx port 1 address $REMOTE_MAC sa 0 pn 1 on key 01 ead3664f508eb06c40ac7104cdae4ce5
* ip addr add 10.1.0.1/16 dev macsec0
* ip link set dev macsec0 up
And in a similar manner on the other machine, while noting the keys order
would be reversed and the MAC address of the other machine.
RDMA traffic is separated through relevant GID entries and in case
of IP ambiguity issue - meaning we have a physical GIDs and a MACsec
GIDs with the same IP/GID, we disable our physical GID in order
to force the user to only use the MACsec GID.
v0: https://lore.kernel.org/netdev/20230813064703.574082-1-leon@kernel.org/
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
RDMA/mlx5: Handles RoCE MACsec steering rules addition and deletion
net/mlx5: Add RoCE MACsec steering infrastructure in core
net/mlx5: Configure MACsec steering for ingress RoCEv2 traffic
net/mlx5: Configure MACsec steering for egress RoCEv2 traffic
IB/core: Reorder GID delete code for RoCE
net/mlx5: Add MACsec priorities in RDMA namespaces
RDMA/mlx5: Implement MACsec gid addition and deletion
net/mlx5: Maintain fs_id xarray per MACsec device inside macsec steering
net/mlx5: Remove netdevice from MACsec steering
net/mlx5e: Move MACsec flow steering and statistics database from ethernet to core
net/mlx5e: Rename MACsec flow steering functions/parameters to suit core naming style
net/mlx5: Remove dependency of macsec flow steering on ethernet
net/mlx5e: Move MACsec flow steering operations to be used as core library
macsec: add functions to get macsec real netdevice and check offload
====================
Link: https://lore.kernel.org/r/20230821073833.59042-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add RoCE MACsec rules when a gid is added for the MACsec netdevice and
handle their cleanup when the gid is removed or the MACsec SA is deleted.
Also support alias IP for the MACsec device, as long as we don't have
more ips than what the gid table can hold.
In addition handle the case where a gid is added but there are still no
SAs added for the MACsec device, so the rules are added later on when
the SAs are added.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Adds all the core steering helper functions that are needed in order
to setup RoCE steering rules which includes both the RX and TX rules
addition and deletion.
As well as exporting the function to be ready to use from the IB driver
where we expose functions to allow deletion of all rules, which is
needed when a GID is deleted, or a deletion of a specific rule when an SA
is deleted, and a similar manner for the rules addition.
These functions are used in a later patch by IB driver to trigger the
rules addition/deletion when needed.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Handle MACsec IP ambiguity issue, since mlx5 hw can't support
programming both the MACsec and the physical gid when they have the same
IP address, because it wouldn't know to whom to steer the traffic.
Hence in such case we delete the physical gid from the hw gid table,
which would then cause all traffic sent over it to fail, and we'll only
be able to send traffic over the MACsec gid.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Since now MACsec flow steering (macsec_fs) and MACsec statistics (stats)
are maintained by the core driver, move their data as well to be saved
inside core structures instead of staying part of ethernet MACsec database.
In addition cleanup all MACsec stats functions from the ethernet MACsec
code and move what's needed to be part of macsec_fs instead.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Each device cap has two modes: MAX and CUR. The driver maintains a
cache of both modes of the capabilities. For most device caps, the MAX
cap mode is never used.
Hence, remove all driver queries of the MAX mode of the said caps as
well as their helper MACROs.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Expose NIC temperature by implementing hwmon kernel API, which turns
current thermal zone kernel API to redundant.
For each one of the supported and exposed thermal diode sensors, expose
the following attributes:
1) Input temperature.
2) Highest temperature.
3) Temperature label:
Depends on the firmware capability, if firmware doesn't support
sensors naming, the fallback naming convention would be: "sensorX",
where X is the HW spec (MTMP register) sensor index.
4) Temperature critical max value:
refers to the high threshold of Warning Event. Will be exposed as
`tempY_crit` hwmon attribute (RO attribute). For example for
ConnectX5 HCA's this temperature value will be 105 Celsius, 10
degrees lower than the HW shutdown temperature).
5) Temperature reset history: resets highest temperature.
For example, for dualport ConnectX5 NIC with a single IC thermal diode
sensor will have 2 hwmon directories (one for each PCI function)
under "/sys/class/hwmon/hwmon[X,Y]".
Listing one of the directories above (hwmonX/Y) generates the
corresponding output below:
$ grep -H -d skip . /sys/class/hwmon/hwmon0/*
Output
=======================================================================
/sys/class/hwmon/hwmon0/name:mlx5
/sys/class/hwmon/hwmon0/temp1_crit:105000
/sys/class/hwmon/hwmon0/temp1_highest:48000
/sys/class/hwmon/hwmon0/temp1_input:46000
/sys/class/hwmon/hwmon0/temp1_label:asic
grep: /sys/class/hwmon/hwmon0/temp1_reset_history: Permission denied
In addition, displaying the sensors data via lm_sensors generates the
corresponding output below:
$ sensors
Output
=======================================================================
mlx5-pci-0800
Adapter: PCI adapter
asic: +46.0°C (crit = +105.0°C, highest = +48.0°C)
mlx5-pci-0801
Adapter: PCI adapter
asic: +46.0°C (crit = +105.0°C, highest = +48.0°C)
CC: Jean Delvare <jdelvare@suse.com>
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807180507.22984-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit enables the dynamic allocation of EQs at runtime, allowing
for more flexibility in managing completion EQs and reducing the memory
overhead of driver load. Whenever a CQ is created for a given vector
index, the driver will lookup to see if there is an already mapped
completion EQ for that vector, if so, utilize it. Otherwise, allocate a
new EQ on demand and then utilize it for the CQ completion events.
Add a protection lock to the EQ table to protect from concurrent EQ
creation attempts.
While at it, replace mlx5_vector2irqn()/mlx5_vector2eqn() with
mlx5_comp_eqn_get() and mlx5_comp_irqn_get() which will allocate an
EQ on demand if no EQ is found for the given vector.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To accurately represent its purpose, rename the function that retrieves
the value of maximum vectors from mlx5_comp_vectors_count() to
mlx5_comp_vectors_max().
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, once driver load completes, IRQ requests were performed for all
vectors. However, as we move to support dynamic creation of EQs, this will
not be the case as some IRQs will not exist at this stage. Thus, in such
case, use the default CPU to IRQ mapping which is the serial mapping based
on IRQ vector index. Meaning, the n'th vector gets mapped to the n'th CPU.
Introduce an API function mlx5_comp_vector_cpu() that takes an IRQ index and
provides the corresponding CPU mapping. It utilizes the existing IRQ
affinity if defined, or resorts to the default serialized CPU mapping
otherwise.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
For IPsec packet offload mode, the order of TC offload and IPsec
offload on the same netdevice is not aligned with the order in the
non-offload software. For example, for RX, the software performs TC
first and then IPsec transformation, but the implementation for
offload does that in the opposite way.
To resolve the difference for now, either IPsec offload or TC offload,
not both, is allowed for a specific interface.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/8e2e5e3b0984d785066e8663aaf97b3ba1bb873f.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Command stats is an array with more than 2K entries, which amounts to
~180KB. This is way more than actually needed, as only ~190 entries
are being used.
Therefore, replace the array with xarray.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Downstream patch will split mlx5_cmd_init() to probe and reload
routines. As a preparation, organize mlx5_cmd struct so that any
field that will be used in the reload routine are grouped at new
nested struct.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Update devcom infrastructure to be more generic, without
depending on max supported ports definition or a device guid,
and also more encapsulated so callers don't need to pass
the register devcom component id per event call.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This cycle saw a focus on rxe and bnxt_re drivers:
- Code cleanups for irdma, rxe, rtrs, hns, vmw_pvrdma
- rxe uses workqueues instead of tasklets
- rxe has better compliance around access checks for MRs and rereg_mr
- mana supportst he 'v2' FW interface for RX coalescing
- hfi1 bug fix for stale cache entries in its MR cache
- mlx5 buf fix to handle FW failures when destroying QPs
- erdma HW has a new doorbell allocation mechanism for uverbs that is
secure
- Lots of small cleanups and rework in bnxt_re
* Use the common mmap functions
* Support disassociation
* Improve FW command flow
- bnxt_re support for "low latency push", this allows a packet
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZJxq+wAKCRCFwuHvBreF
YSN+AQDKAmWdKCqmc3boMIq5wt4h7yYzdW47LpzGarOn5Hf+UgEA6mpPJyRqB43C
CNXYIbASl/LLaWzFvxCq/AYp6tzuog4=
=I8ju
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This cycle saw a focus on rxe and bnxt_re drivers:
- Code cleanups for irdma, rxe, rtrs, hns, vmw_pvrdma
- rxe uses workqueues instead of tasklets
- rxe has better compliance around access checks for MRs and rereg_mr
- mana supportst he 'v2' FW interface for RX coalescing
- hfi1 bug fix for stale cache entries in its MR cache
- mlx5 buf fix to handle FW failures when destroying QPs
- erdma HW has a new doorbell allocation mechanism for uverbs that is
secure
- Lots of small cleanups and rework in bnxt_re:
- Use the common mmap functions
- Support disassociation
- Improve FW command flow
- support for 'low latency push'"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (71 commits)
RDMA/bnxt_re: Fix an IS_ERR() vs NULL check
RDMA/bnxt_re: Fix spelling mistake "priviledged" -> "privileged"
RDMA/bnxt_re: Remove duplicated include in bnxt_re/main.c
RDMA/bnxt_re: Refactor code around bnxt_qplib_map_rc()
RDMA/bnxt_re: Remove incorrect return check from slow path
RDMA/bnxt_re: Enable low latency push
RDMA/bnxt_re: Reorg the bar mapping
RDMA/bnxt_re: Move the interface version to chip context structure
RDMA/bnxt_re: Query function capabilities from firmware
RDMA/bnxt_re: Optimize the bnxt_re_init_hwrm_hdr usage
RDMA/bnxt_re: Add disassociate ucontext support
RDMA/bnxt_re: Use the common mmap helper functions
RDMA/bnxt_re: Initialize opcode while sending message
RDMA/cma: Remove NULL check before dev_{put, hold}
RDMA/rxe: Simplify cq->notify code
RDMA/rxe: Fixes mr access supported list
RDMA/bnxt_re: optimize the parameters passed to helper functions
RDMA/bnxt_re: remove redundant cmdq_bitmap
RDMA/bnxt_re: use firmware provided max request timeout
RDMA/bnxt_re: cancel all control path command waiters upon error
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmSYzfYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/ucH/iOM/1Py/fSg0qSs
7NJ4XXlourT5zrnRMom3cm3d9gYqgTzgvKFL3kjMEexTRVYbhlcO4ZPRsiry8zxF
ToGX+V8tDMqb8WSdFHzkljRY+zDRyfEUDMlTzROAD9DunLmQtkJKyrggkeGdjkpP
OyfGqKpwlLXZRAXBil/U8Mx9MHdjJubloZwghLZr33VdUZa68+JJ9l6w163Oe/ET
K264NM0wxN/kvN57JvePgqMccQwpINylg8IhRI+XelgczjUXeJBsOA8TDv4bDN4Q
bjCLhkWbIaZtTYqvOXa/kD0T8wd7KETsMBQN8YzyDh6W0GmAlJjTawyAhA6jA5in
x3uz2W8=
=L3zp
-----END PGP SIGNATURE-----
Merge tag 'v6.4' into rdma.git for-next
Linux 6.4
Resolve conflicts between rdma rc and next in rxe_cq matching linux-next:
drivers/infiniband/sw/rxe/rxe_cq.c:
https://lore.kernel.org/r/20230622115246.365d30ad@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Many rc bug fixes:
- Two rtrs bug fixes for error unwind bugs
- Several rxe bug fixes:
* Incorrect Rx packet validation
* Using memory without a refcount
* Syzkaller found use before initialization
* Regression fix for missing locking with the tasklet conversion from
this merge window
- Have bnxt report the correct link properties to userspace, this was
a regression in v6.3
- Several mlx5 bug fixes:
* Kernel crash triggerable by userspace for the RAW ethernet profile
* Defend against steering refcounting issues created by userspace
* Incorrect change of QP port affinity parameters in some LAG configurations
- Fix mlx5 Q counters:
* Do not over allocate Q counters to allow userspace to use the full
port capacity
* Kernel crash triggered by eswitch due to mis-use of Q counters
* Incorrect mlx5_device for Q counters in some LAG configurations
- Properly implement the IBA spec restricting privileged qkeys to root
- Always an error when reading from a disassociated device's event queue
- isert bug fixes:
* Avoid a deadlock with the CM handler and CM ID destruction
* Correct list corruption due to incorrect locking
* Fix a use after free around connection tear down
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZIoZ7gAKCRCFwuHvBreF
YUSyAPsH+VdqzYd1z/bk0zMds9JR2oqMOR8l02e4gq8K9hjTJAD/ePEuT5PTpFZu
FrT4SDhOfA30XNz+RofRNisJC92OOAo=
=KyF7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"This is an unusually large bunch of bug fixes for the later rc cycle,
rxe and mlx5 both dumped a lot of things at once. rxe continues to fix
itself, and mlx5 is fixing a bunch of "queue counters" related bugs.
There is one highly notable bug fix regarding the qkey. This small
security check was missed in the original 2005 implementation and it
allows some significant issues.
Summary:
- Two rtrs bug fixes for error unwind bugs
- Several rxe bug fixes:
* Incorrect Rx packet validation
* Using memory without a refcount
* Syzkaller found use before initialization
* Regression fix for missing locking with the tasklet conversion
from this merge window
- Have bnxt report the correct link properties to userspace, this was
a regression in v6.3
- Several mlx5 bug fixes:
* Kernel crash triggerable by userspace for the RAW ethernet
profile
* Defend against steering refcounting issues created by userspace
* Incorrect change of QP port affinity parameters in some LAG
configurations
- Fix mlx5 Q counters:
* Do not over allocate Q counters to allow userspace to use the
full port capacity
* Kernel crash triggered by eswitch due to mis-use of Q counters
* Incorrect mlx5_device for Q counters in some LAG configurations
- Properly implement the IBA spec restricting privileged qkeys to
root
- Always an error when reading from a disassociated device's event
queue
- isert bug fixes:
* Avoid a deadlock with the CM handler and CM ID destruction
* Correct list corruption due to incorrect locking
* Fix a use after free around connection tear down"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rxe: Fix rxe_cq_post
IB/isert: Fix incorrect release of isert connection
IB/isert: Fix possible list corruption in CMA handler
IB/isert: Fix dead lock in ib_isert
RDMA/mlx5: Fix affinity assignment
IB/uverbs: Fix to consider event queue closing also upon non-blocking mode
RDMA/uverbs: Restrict usage of privileged QKEYs
RDMA/cma: Always set static rate to 0 for RoCE
RDMA/mlx5: Fix Q-counters query in LAG mode
RDMA/mlx5: Remove vport Q-counters dependency on normal Q-counters
RDMA/mlx5: Fix Q-counters per vport allocation
RDMA/mlx5: Create an indirect flow table for steering anchor
RDMA/mlx5: Initiate dropless RQ for RAW Ethernet functions
RDMA/rxe: Fix the use-before-initialization error of resp_pkts
RDMA/bnxt_re: Fix reporting active_{speed,width} attributes
RDMA/rxe: Fix ref count error in check_rkey()
RDMA/rxe: Fix packet length checks
RDMA/rtrs: Fix rxe_dealloc_pd warning
RDMA/rtrs: Fix the last iu->buf leak in err path
The cited commit aimed to ensure that Virtual Functions (VFs) assign a
queue affinity to a Queue Pair (QP) to distribute traffic when
the LAG master creates a hardware LAG. If the affinity was set while
the hardware was not in LAG, the firmware would ignore the affinity value.
However, this commit unintentionally assigned an affinity to QPs on the LAG
master's VPORT even if the RDMA device was not marked as LAG-enabled.
In most cases, this was not an issue because when the hardware entered
hardware LAG configuration, the RDMA device of the LAG master would be
destroyed and a new one would be created, marked as LAG-enabled.
The problem arises when a user configures Equal-Cost Multipath (ECMP).
In ECMP mode, traffic can be directed to different physical ports based on
the queue affinity, which is intended for use by VPORTS other than the
E-Switch manager. ECMP mode is supported only if both E-Switch managers are
in switchdev mode and the appropriate route is configured via IP. In this
configuration, the RDMA device is not destroyed, and we retain the RDMA
device that is not marked as LAG-enabled.
To ensure correct behavior, Send Queues (SQs) opened by the E-Switch
manager through verbs should be assigned strict affinity. This means they
will only be able to communicate through the native physical port
associated with the E-Switch manager. This will prevent the firmware from
assigning affinity and will not allow the SQs to be remapped in case of
failover.
Fixes: 802dcc7fc5 ("RDMA/mlx5: Support TX port affinity for VF drivers in LAG mode")
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/425b05f4da840bc684b0f7e8ebf61aeb5cef09b0.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When the embedded cpu supports SRIOV it can be enabled and disabled
independently from the host SRIOV. Track the pages separately so we can
properly wait for returned VF pages.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Enable creation of a devlink port for EC VF vports.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Introduce a generic APIs to iterate over all the devices which are part
of the LAG. This API replace mlx5_lag_get_peer_mdev() which retrieve
only a single peer device from the lag.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Don't query the firmware so many times (num rqs * num wqes * wqe frags)
because it slows down linearly the interface creation time when the
product is larger. Do it only once per mdev and store the result in
mlx5e_param.
Due to helper function being called from different files, move it to
an appropriate location. Rename the function with a proper prefix and
add a small cleanup.
This fix applies only for legacy rq.
Fixes: 1b1e486883 ("net/mlx5e: Use query_special_contexts for mkeys")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
1) Dragos Improves RX page pool, and provides some fixes to his previous series:
1.1) Fix releasing page_pool for striding RQ and legacy RQ nonlinear case
1.2) Hook NAPIs to page pools to gain more performance.
2) From Roi, Some cleanups to TC and eswitch modules.
3) Maher migrates vnic diagnostic counters reporting from debugfs to a
dedicated devlink health reporter
Maher Says:
===========
net/mlx5: Expose vnic diagnostic counters using devlink
Currently, vnic diagnostic counters are exposed through the following
debugfs:
$ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/
cq_overrun
quota_exceeded_command
total_q_under_processor_handle
invalid_command
send_queue_priority_update_flow
nic_receive_steering_discard
The current design does not allow the hypervisor to view the diagnostic
counters of its VFs, in case the VFs get bound to a VM. In other words,
the counters are not exposed for representor interfaces.
Furthermore, the debugfs design is inconvenient future-wise, in case more
counters need to be reported by the driver in the future.
As these counters pertain to vNIC health, it is more appropriate to
utilize the devlink health reporter to expose them.
Thus, this patchest includes the following changes:
* Drop the current vnic diagnostic counters debugfs interface.
* Add a vnic devlink health reporter for PFs/VFs core devices, which
when diagnosed will dump vnic diagnostic counter values that are
queried from FW.
* Add a vnic devlink health reporter for the representor interface, which
serves the same purpose listed in the previous point, in addition to
allowing the hypervisor to view its VFs diagnostic counters, even when
the VFs are bounded to external VMs.
Example of devlink health reporter usage is:
$devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
===========
4) SW steering fixes and improvements
Yevgeny Kliteynik Says:
=======================
These short patch series are just small fixes / improvements for
SW steering:
- Patch 1: Fix dumping of legacy modify_hdr in debug dump to
align to what is expected by parser
- Patch 2: Have separate threshold for ICM sync per ICM type
- Patch 3: Add more info to the steering debug dump - Linux
version and device name
- Patch 4: Keep track of number of buddies that are currently
in use per domain per buddy type
=======================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmRB6HcACgkQSD+KveBX
+j4+nAf/cCJ7poDQQOp/Oug6H3xn/COYPv3Iasl0dhT8yu+LlNMQTF0bRrU4UpAQ
aIKcja2biOBAnD96EhA1nJoo9bJUTtKLokUDDyK/xRHS+wIyr8Lia6vxTz1yjj3C
jDqX3+ZP4rFuhAvh+92AT1I0JvS0g+ocokPVKmm+Pwf4y7sG69CZ7phVGSc0iFfT
y+gnP4C6cdIr7kNLByeeX6alDHL/q83vfNFWrugRPna2uXjcSR5Gtp03pJ0OVkI5
qHxG7Bz0BE/hcMYwNcNVTu/5e02+5PS6B8kN/ho5DkhVFhp+h17XWWvOMZxC3jfI
k0ijRSWocG1jIgRgkioBRgzXmc6nNw==
=jUe8
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-04-20
1) Dragos Improves RX page pool, and provides some fixes to his previous
series:
1.1) Fix releasing page_pool for striding RQ and legacy RQ nonlinear case
1.2) Hook NAPIs to page pools to gain more performance.
2) From Roi, Some cleanups to TC and eswitch modules.
3) Maher migrates vnic diagnostic counters reporting from debugfs to a
dedicated devlink health reporter
Maher Says:
===========
net/mlx5: Expose vnic diagnostic counters using devlink
Currently, vnic diagnostic counters are exposed through the following
debugfs:
$ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/
cq_overrun
quota_exceeded_command
total_q_under_processor_handle
invalid_command
send_queue_priority_update_flow
nic_receive_steering_discard
The current design does not allow the hypervisor to view the diagnostic
counters of its VFs, in case the VFs get bound to a VM. In other words,
the counters are not exposed for representor interfaces.
Furthermore, the debugfs design is inconvenient future-wise, in case more
counters need to be reported by the driver in the future.
As these counters pertain to vNIC health, it is more appropriate to
utilize the devlink health reporter to expose them.
Thus, this patchest includes the following changes:
* Drop the current vnic diagnostic counters debugfs interface.
* Add a vnic devlink health reporter for PFs/VFs core devices, which
when diagnosed will dump vnic diagnostic counter values that are
queried from FW.
* Add a vnic devlink health reporter for the representor interface, which
serves the same purpose listed in the previous point, in addition to
allowing the hypervisor to view its VFs diagnostic counters, even when
the VFs are bounded to external VMs.
Example of devlink health reporter usage is:
$devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
===========
4) SW steering fixes and improvements
Yevgeny Kliteynik Says:
=======================
These short patch series are just small fixes / improvements for
SW steering:
- Patch 1: Fix dumping of legacy modify_hdr in debug dump to
align to what is expected by parser
- Patch 2: Have separate threshold for ICM sync per ICM type
- Patch 3: Add more info to the steering debug dump - Linux
version and device name
- Patch 4: Keep track of number of buddies that are currently
in use per domain per buddy type
=======================
* tag 'mlx5-updates-2023-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Update op_mode to op_mod for port selection
net/mlx5: E-Switch, Remove unused mlx5_esw_offloads_vport_metadata_set()
net/mlx5: E-Switch, Remove redundant dev arg from mlx5_esw_vport_alloc()
net/mlx5: Include linux/pci.h for pci_msix_can_alloc_dyn()
net/mlx5e: RX, Hook NAPIs to page pools
net/mlx5e: RX, Fix XDP_TX page release for legacy rq nonlinear case
net/mlx5e: RX, Fix releasing page_pool pages twice for striding RQ
net/mlx5e: Add vnic devlink health reporter to representors
net/mlx5: Add vnic devlink health reporter to PFs/VFs
Revert "net/mlx5: Expose vnic diagnostic counters for eswitch managed vports"
Revert "net/mlx5: Expose steering dropped packets counter"
net/mlx5: DR, Add memory statistics for domain object
net/mlx5: DR, Add more info in domain dbg dump
net/mlx5: DR, Calculate sync threshold of each pool according to its type
net/mlx5: DR, Fix dumping of legacy modify_hdr in debug dump
====================
Link: https://lore.kernel.org/r/20230421013850.349646-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a vnic devlink health reporter for PFs/VFs interfaces.
The reporter's diagnose callback displays the values of vNIC/vport
transport debug counters of PFs/VFs, as follows:
$ devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
Moreover, add documentation on the reporter functionality and the
counters description.
While at it, expose the vNIC counters diagnose function to be used by
the downstream patch, which will reveal the counters for representor
interfaces.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
