mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2025-12-25 03:11:43 +00:00
f99a75f11f
14577 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Krzysztof Kozlowski
|
f99a75f11f |
arm64: dts: rockchip: minor whitespace cleanup around '='
The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230702185242.44421-1-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Christopher Obbard
|
2bd1d2dd80 |
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running
in HS400 mode. This ends up resulting in some block errors after a while
or after a "heavy" operation utilising the eMMC (e.g. resizing a
filesystem). An example of these errors is as follows:
[ 289.171014] mmc1: running CQE recovery
[ 290.048972] mmc1: running CQE recovery
[ 290.054834] mmc1: running CQE recovery
[ 290.060817] mmc1: running CQE recovery
[ 290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0
[ 290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466)
[ 290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288
[ 290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289
[ 290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290
[ 290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291
[ 290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292
[ 290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293
[ 290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294
[ 290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295
[ 290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296
[ 290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297
Disabling the Command Queue seems to stop the CQE recovery from running,
but doesn't seem to improve the I/O errors. Until this can be investigated
further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O
errors from occurring.
Fixes:
|
||
|
Christopher Obbard
|
cee572756a |
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running
in HS400 mode. This ends up resulting in some block errors after a while
or after a "heavy" operation utilising the eMMC (e.g. resizing a
filesystem). An example of these errors is as follows:
[ 289.171014] mmc1: running CQE recovery
[ 290.048972] mmc1: running CQE recovery
[ 290.054834] mmc1: running CQE recovery
[ 290.060817] mmc1: running CQE recovery
[ 290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0
[ 290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466)
[ 290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288
[ 290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289
[ 290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290
[ 290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291
[ 290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292
[ 290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293
[ 290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294
[ 290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295
[ 290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296
[ 290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297
Disabling the Command Queue seems to stop the CQE recovery from running,
but doesn't seem to improve the I/O errors. Until this can be investigated
further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O
errors from occurring.
While we are here, set the eMMC maximum clock frequency to 1.5MHz to
follow the ROCK 4C+.
Fixes:
|
||
|
Krzysztof Kozlowski
|
5ce6971e52 |
arm64: dts: rockchip: add missing space before { on indiedroid nova
Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230705145859.293260-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
||
|
Krzysztof Kozlowski
|
2d6f7e3938 |
arm64: dts: rockchip: correct wifi interrupt flag in Box Demo
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE. Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230707063335.13317-3-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Krzysztof Kozlowski
|
cfa12c32b9 |
arm64: dts: rockchip: correct wifi interrupt flag in Rock Pi 4B
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE. Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Christopher Obbard <chris.obbard@collabora.com> Link: https://lore.kernel.org/r/20230707063335.13317-2-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Krzysztof Kozlowski
|
8183bb7e29 |
arm64: dts: rockchip: correct wifi interrupt flag in eaidk-610
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE. Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230707063335.13317-1-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Cristian Ciocaltea
|
4d08b19629 |
arm64: dts: rockchip: Drop invalid regulator-init-microvolt property
The 'regulator-init-microvolt' property is not currently supported by
any driver, it was simply carried on from downstream kernels.
The problem is also indicated by the following dtbs_check warning:
rk3588-rock-5b.dtb: pmic@0: regulators:dcdc-reg4: Unevaluated properties are not allowed ('regulator-init-microvolt' was unexpected)
Remove the invalid property from all affected DTS files.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20230707162217.675390-1-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
||
|
Linus Torvalds
|
a9025a5f16 |
ARM: New SoC support for 6.5
There are two new SoC families this time, and both appear fairly similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core Cortex-A35 based chips for the low-power industrial embedded market, and they mark the first 64-bit product in a widely used family of 32-bit Arm MCUs and SoCs. The way into the kernel is completely different here: The team at ST has a long history of working upstream with their STM32MP1 and other SoCs, and they produced a complete port to arm64 together with the initial announcement. Nuvoton also has multiple SoC product lines with current or previous upstream support, but those are maintained by third parties and are unrelated. The patch series from Nuvoton's Jacky Huang had to go through many revisisions to get to this point and is still missing a few drivers including the serial port for the moment. The branch contains the devicetree files as well as all the code changes, in order to have something that can be tested standalone. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmScqtkACgkQYKtH/8kJ Uifqyg//XgvZBxb/2GILYcThVgLoo1fYA9tG5M0LERY/aPiUwrCwIl5swGQXK4vK E3UBLsQURer4yEBRq7iB6RGbwa4Opjdy3yTkj6WSgEMPh6e6jGvmm+dJ7HuWeviS 8oeyo3Xar6tIF+A8xlBloHA4J6690FYB40McQzh8sWG5SE+id56S71NGnNW0kQTn wsul9BZcGVoyMYNBi/uXtOVUPy7jF3UBC3HJF9UOT7q77bCLjVc/aHmmnZ3zmbYA 2oX3X5hVJakFba6vnz+rjNlzuAoGXJPDdsKFxBysdsksac/TxqRIQGNe75DZZVgz ESTpt1QqjmCFw32HEzi8Ne22FOpzlBqUxBMznHPenpz1/om2ezs3q7ffuPqKvMaq PANuK++JKJaBChVMzJbn84Sr1fvO4ecGJpKZTFC6t6SqHQNQFJT6rfMHx01Xw2wW LjKfEBCR6zEXN0+FaaujgJ4y/9pH1VHPynrZJG9WEwPUEZb2kJ/2RMXjNpzOWKiB pWYV1oW2TqFKYKhFm/pjkbi6Rq76UwEi8fWWoGMkmeV3KZ/0GFauQhItu6mX3s7W uGnUQyrBzWzUoashYFuNtXKHYdwuWgOmG660BXHkyxwvqV96ICGEJ+97zGIBDj81 F8zLxEjPbsEZqGGSosAyk9oYC6eh7eK2V7xx+CUYLTuKZw13zNo= =zaVi -----END PGP SIGNATURE----- Merge tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new ARM SoC support from Arnd Bergmann: "There are two new SoC families this time, and both appear fairly similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core Cortex-A35 based chips for the low-power industrial embedded market, and they mark the first 64-bit product in a widely used family of 32-bit Arm MCUs and SoCs. The way into the kernel is completely different here: The team at ST has a long history of working upstream with their STM32MP1 and other SoCs, and they produced a complete port to arm64 together with the initial announcement. Nuvoton also has multiple SoC product lines with current or previous upstream support, but those are maintained by third parties and are unrelated. The patch series from Nuvoton's Jacky Huang had to go through many revisisions to get to this point and is still missing a few drivers including the serial port for the moment. The branch contains the devicetree files as well as all the code changes, in order to have something that can be tested standalone" * tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) clk: nuvoton: Use clk_parent_data instead of string for parent clock clk: nuvoton: Update all constant hex values to lowercase clk: nuvoton: Add clk-ma35d1.h for driver extern functions remoteproc: stm32: use correct format strings on 64-bit MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE arm64: defconfig: enable ARCH_STM32 and STM32 serial driver arm64: dts: st: add stm32mp257f-ev1 board support dt-bindings: stm32: document stm32mp257f-ev1 board arm64: dts: st: introduce stm32mp25 pinctrl files arm64: dts: st: introduce stm32mp25 SoCs family arm64: introduce STM32 family on Armv8 architecture dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon pinctrl: stm32: add stm32mp257 pinctrl support dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages Documentation/process: add soc maintainer handbook reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35 reset: Add Nuvoton ma35d1 reset driver support clk: nuvoton: Add clock driver for ma35d1 clock controller arm64: dts: nuvoton: Add initial ma35d1 device tree dt-bindings: serial: Document ma35d1 uart controller ... |
||
|
Linus Torvalds
|
6c1561fb90 |
ARM: SoC devicetree updates for 6.5
The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for each
SoC vendor, following the same scheme that is used on arm64, mips and
riscv. This has been discussed for many years, but so far we never did
this as there was a plan to move the files out of the kernel entirely,
which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along
with their device drivers.
* The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the time.
* Amlogic C3 is a Cortex-A35 based smart IP camera chip
* Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
* Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
* Qualcomm SDX75 is the latest generation modem chip that is used
as a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
* Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie
C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those included
there are 39 new board files, but only five more 32-bit this time, probably
a new low:
* Marantec Maveo board based on dhcor imx6ull module
* Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
* Epson Moverio BT-200 AR glasses based on TI OMAP4
* PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
* ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than
we had in the recent releases:
* Three boards based on NXP i.MX8: Emtop SoM & Baseboard,
NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice
gw7905-2x device.
* NVIDIA IGX Orin and Jetson Orin Nano boards, both based on
tegra234
* Qualcomm gains support for 6 reference boards on various members
of their IPQ networking SoC series, as well as the Sony Xperia M4
Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board
on top of the various reference platforms for their new chips.
* Rockchips support for several newer boards: Indiedroid Nova (rk3588),
Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C
Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S
(rk3568)
* TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin
family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
* continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
* support for devicetree overlays on at91, bcm283x
* significant additions to existing SoC support on mediatek, qualcomm,
ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1
As usual, a lot more detail is available in the individual merge
commits.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSdmeUACgkQYKtH/8kJ
UieI5A//bxZXA54htEPXN5V1oIgC4JB4UYkf8fAvtyK4tdaImMn4OTwLD8/sw18X
LQHf1VOLGsGJyNCQ+cUoaBnysr2CXqL/9dA/ARTalqnrKMN/OQjt2wg62n1Ss9Pv
XRlxJABGxAokTO/SuPtOIakSkzwDkuAkIFKfmrNQGcT95XkJXJk3FlMRr84310UG
sl6jP2XFSiLSYm958MMNt+DMhxRmKuyT9gos24KGsb83lZSm9DC2hYimkjd1KF5P
CKeShWeoGoJe+YhnJx6dsDSqVgp1DFLZF1G0auSwjs9rCAKnCDMlz+T2bEzviVDh
XONBNmnOGwPRiBI+1WdzX+pZqMMWINmhIObuODV4ANCSlX3KlSaC2rropEimlW9S
CefvYJ+i7v/BQgMLhKlft0RHhsPU7Pfhfq4PWxaIMAOWA6ZaVczMCpgeUupHIwIQ
lWXZZDlqmTL6SCgkOhEtdP2GGec7YSroq7sscinBaQs1f5pfoW83CNn46gZ9Jh8S
RnXp/+vZ7+RFc15Y0VM82F6a7WN/n0BAqKmqwceDrCpf6ILrBc1lA7NhEvd80wbB
IMg8QNqIzZ9aTOoZmB/1wAXaLClKCE3poTF+Wkd5szN7qe+hKAe1M4w5XvNUO/i/
d0/X5KNA2ykuUxRMdd4lG54VsTJdDCVNaNeaEqasv9JCBBfvuwI=
=X/KE
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1
As usual, a lot more detail is available in the individual merge
commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...
|
||
|
Arnd Bergmann
|
ed8ff046ed |
One last Qualcomm ARM64 DeviceTree fix for v6.4
Changes related to cache management for DMA memory caused WiFi to stop work on SC7180 and SC7280 based products, using TF-A. These changes marks the relevant device dma-coherent to correct the behavior. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmSUpxYVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3F6mgP/0lybAjuULXku98KmDv+OxGQ1Wtd fNnYHHA3sfCk5S6Njxrq3GWAd5F3XVBDgHjNshR1cRZgl1MIuJdvjxl0gSCI8b81 dl2MNi9enogL+kKeVD3w2pzE4ABpGM787qjPGRJFjwWlsxtO2q2oesrJGZRG5wLl N2remtGZy2huzG/NEJO+NR59RYnMqIuxmrQaDiU+BaqfEAQjZx4VRLB13ixTBceX 6BIog6Q0Idl9BS31AOFePSa+BGN4WKPVQuZcHuJMqrQ1Ocqm4E7pOoynu4dpuP1x XT1IzcIavR71doZWUA8WKsKEU5AArDIotUi8WRieEGWt9KWWOXuHYyMUtI8uhz7r CgTmsDFI+gnmPG9VZLTkT/oIJu5+Ha/jk1jngwPZhbIqqM3rKK7gXYerpTKlTKRR XmH1c8smTI255kYYKAY4vvY/dNinyPjEFJ89KhqE6Jlsq27VOQj+2RedmAjthj60 c8K3BuWRsDlkul5czuBre/soTn/vWl/GbbfhD2gXMLrbLXnLvYnFudR7AdiPWcSl 4QEr2MrErvGlmbT4GbBVw6q6z/UbLpTzcQMekFk6shpq1x3SuBSlKTwbHEpV8vHR Z13jt/Pon4ysg00kFGJUDastzSHEKf41ggoGD4m++Z2pk4R0iA02dr8U/9i1wyeR 3rtRHHyG3cJI0zby =ZdjH -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSV/OcACgkQYKtH/8kJ UidD+Q//XxciqeCyOqnK+Uv2MXj3CDswUPZIQ3bTi8/JJt6WpT6qP8ZYWP3CbfeX qTe3tgbjmG+5Co2cUq1PSwNTLn1/vG2mEyhz48EDOmh+20joeduKRwt5DrN29+GP nk/N+1bslHpEmjgfSIliOLJNLlMvBpUOyFKTT70zDkRN1o3en/aLKhI1N5h1G8IF f3wt68siitFKNEBgLyN6VTZeEO0LWuX4oqC5ggq8hA+0k3XuGRHcp4OXQvTbhrF8 AgRQSaaWc9awBSO0kVbOG+P3cXTc2KdJIua6uaq5ToJ6LPArQ3jtIDfMMMWBQtWd 4evU2maitV384SpqlQ1PN8TC5oqIEVdvfh/bujDPO5iTajj9x8LT9u0suPkU7q0A tpF9zwpcClo7K1svgEi3wJ7vr/Ktm8mxhu+OKmYeQfQCIyAIGD+00UCVuHbSUuzo doptwvUNQzJ3i6Ifszdl5fslnN/ol5gP02PdUsQiXwC3NIAtWjTgtENYq4WN0VwV REQzIhHRlXF2NO+UBmAvL/Ju9+7yV3fYkdFBTjJ85BnIDejnZbaZ4ErRYTxzuNYA /VGiSuE5aVpTBuLPLF2pAmUnFsITXMTKEv/knObq4BM0YiWgixee0PFmCPWVvUOd P7tDO9TUFHjcFJGHge+nRgiMRzedVqIW2d4SfPFWAF5KgiVwH74= =f/SB -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-fixes-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes One last Qualcomm ARM64 DeviceTree fix for v6.4 Changes related to cache management for DMA memory caused WiFi to stop work on SC7180 and SC7280 based products, using TF-A. These changes marks the relevant device dma-coherent to correct the behavior. * tag 'qcom-arm64-fixes-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent Link: https://lore.kernel.org/r/20230622203248.106422-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Douglas Anderson
|
7b59e8ae92 |
arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices
Just like for sc7180 devices using the Chrome bootflow (AKA trogdor and IDP), sc7280 devices using the Chrome bootflow also need their firmware marked dma-coherent. On sc7280 this wasn't causing WiFi to fail to startup, since WiFi works differently there. However, on sc7280 devices we were still getting the message at bootup after commit |
||
|
Douglas Anderson
|
a54b7fa6b9 |
arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor
Trogdor devices use firmware backed by TF-A instead of Qualcomm's normal TZ. On TF-A we end up mapping memory as cacheable. Specifically, you can see in Trogdor's TF-A code [1] in qti_sip_mem_assign() that we call qti_mmap_add_dynamic_region() with MT_RO_DATA. This translates down to MT_MEMORY instead of MT_NON_CACHEABLE or MT_DEVICE. Apparently Qualcomm's normal TZ implementation maps the memory as non-cacheable. Let's add the "dma-coherent" attribute to the SCM for trogdor. Adding "dma-coherent" like this fixes WiFi on sc7180-trogdor devices. WiFi was broken as of commit |
||
|
Douglas Anderson
|
9a5f0b11e4 |
arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP
sc7180-idp is, for most intents and purposes, a trogdor device. Specifically, sc7180-idp is designed to run the same style of firmware as trogdor devices. This can be seen from the fact that IDP has the same "Reserved memory changes" in its device tree that trogdor has. Recently it was realized that we need to mark SCM as dma-coherent to match what trogdor's style of firmware (based on TF-A) does [1]. That means we need this dma-coherent tag on IDP as well. Without this, on newer versions of Linux, specifically those with commit |
||
|
Rob Herring
|
724ba67515 |
ARM: dts: Move .dts files to vendor sub-directories
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Arnd Bergmann
|
d704f1fe9f |
This pull request contains Broadcom ARM64-based SoCs changes for 6.5,
please pull the following: - Krzysztof fixes the BCMBCA DTS files to have correct cache properties - Tony unifies the pinctrl-single pin group(s) for the Stingray SoCs - Aurelien enables the BCM283x DTS files to be built with relocation information to make them usable with DT overlays -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmSQWzgACgkQh9CWnEQH BwT1XA//dwU6CBflPMVgNDVjpA1a4GVrrCecq3Zr5PBQefBQXE8tLZbuv2TMuN54 cigBk1L53q7rQMYNvYXv6jANZbr+hQ0L9M+CZq1HvQVKgTaf1Mzrt8Mp3hRSsaDx sjKeCHPTGM7JF5tQ+0sgn1PRoruO0eJ7Urw7ykSjmfX8blb7A64FcFUfjB47IaZA o+fX9WaE94qjM37ezESs6ErU+KOipjHGxzKnoFrP9UOFDfQ5kQZAitFEAFtQwTyk ybi3ekBanZgi7lU4Ok0wsbFBzLj+75Lc/z5Sv2W0MEvc8stMp/tRGBy31ztHKhaR SgE0NZu7WyCDzvqm5inY7HNVlHgBWSOg+h2esaTBJWZrUhVKLEJjAnLFPnBEu0OC sCcbqln3rINk1MtxE0zEtkhy6VWeI1sZjSliNbECr24vWNyIhhT3yUxbUduct4f4 9BZ9/ext7wOTSTtbv1yS/HcRHp2VEafGGePxpdmsif8lXJ4iSETYRBJ1gwGHqH31 FcLXke/8R7o5u7NIHIx0kXKSJTxOPGXY7aDnWKx+E/TJE0csB1861GbGBd5pJmP2 Tj7cyLiPIJKJ/KNGyD52LQfOcqPnlBjC0GCJsSAbBcXyY2bUDZIQ9l1Ita2vX9by anMe853B7Nc1Puq2nsYRZE8DfzkBc303ddhKiSd0Aq6rFOKyXjk= =vl4w -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSFLQACgkQYKtH/8kJ UieRJQ//VeSUyDJQtlAXnGpKPzNF7rusS0RMn+eymtOg0b9EnMnfnfCbB7TKYsek KKvI66yGXU0Q8Xh6PGkXOqW2TJqp/n0m9rVsnxE4QTauHY780jKFUERskKTmVIes KPskMtJKb6YRC6KxTtieByc3OSgGlcqCtjtoEsZI0E0yY5UOM7swvKeqGtnC/2Fe N5hlOJjavHFDuWg7n7uogWvH4sv4OOkbCfGC5si44BlPraNMIwxkVm3q2x8zq1dt C9ba1/Apk5Bi0nXhWzLBsNrU00yHxrgKCttkuqRZOF1Igo5pG3UIPCbsygmbHILb NlzwrcC5AoAm+Nnvz1t2ijLgp9MOOX8ATGYnZSrjKg3TvyuE5GmbE8/00PCKCXqy 8d77xOS+EqG8ln50nCSSVyxjtRqDJ9ew6GFB9lPvwjj/0jFkEzmb2aA8W5BsqsvS nRCP+Lqi1bZeIQ6S50V1vDrbDpRSvRuC7MlmhcUosryyMFYe4WrYsJ/tWhfrovZr iDyiFP+E64Ksv4z/0pm3fi5npesDf8SsQoxYdXS6fCliG+SRAHwaUEpQnEYVS3dr B7h5gYVKgf3VXhk8lPzDao7eHwPlIaCqsSsB2icyLQvfZO4ZKnoAzxWNULLVygKA 5LAp35OiYGWFY1dWazI+YaZmI+4RwrLxCeGrlj+S/rOi7mSSL3Y= =I902 -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-6.5/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM64-based SoCs changes for 6.5, please pull the following: - Krzysztof fixes the BCMBCA DTS files to have correct cache properties - Tony unifies the pinctrl-single pin group(s) for the Stingray SoCs - Aurelien enables the BCM283x DTS files to be built with relocation information to make them usable with DT overlays * tag 'arm-soc/for-6.5/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: Enable device-tree overlay support for RPi devices arm64: dts: broadcom: Unify pinctrl-single pin group nodes for stingray arm64: dts: broadcom: add missing cache properties Link: https://lore.kernel.org/r/20230619134920.3384844-2-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
982e6e1966 |
mvebu dt64 for 6.5 (part 1)
Few improvements following the dt bindings: - add missing cache properties - fix nand_controller node name according to YAML - fix pca954x i2c-mux node names Fix espressobin-ultra boot failure and wifi for EspressoBIN Ultra (Armada 3720) -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCZIxbqgAKCRALBhiOFHI7 1d54AJ0byix3TvJ4uDW2mSD6cQPDuT/k+QCfehNv7uPLD8FIIh81tOMc1529cZo= =JYkk -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSE8YACgkQYKtH/8kJ UicXBRAAkQ7hez1rnpEaNVV5X5HUrx2CieZJI5FfpagBi6xkAQ93iWulji9ADMpY 893qBc7yXsf4LpxJ4lhwhDQETJXZEN/kL3CXMIc6HycsS9Qvrab8/QNxuHQMuL67 lGGpX8VFDjyySl1RHp0YH7N5F4VtpnOLVOidizuoinxl7HixQaXSbHWJpu2GfRI5 nqAjX7xU9Y4lLXWC8ZYgQUnshkL25YlDSgv3uwJzafGfta7hwsQG04XIAu7TQf5L K1EQbcdetn8s3c6cNqcxZ0NlGnEH2j7sM40YFeay4+yCH6aeQz2hSEIsZlvdkL/X vWDy08lwHeFB5SCJMcJA66WgMXz5qu1hvrpi3mWBk7IWgWZeUt5wMBPK2xSIU9SQ MnUWwkhObXNIVuhBgzGI5KOViH6srU7pLXK7yfxMgUGN2uD7sbb6YXxsbxqUu1LU hSCwZXkEIyACA8g1qhpAPqJhzQnTByf1CXXGqXGsFH/HjVvtpffOpoaXKqnEjlBh e1t/FL2y/9NlHI7vSP5bQxxr2suabmo/lJr/VvxG6ttPaJTTZoSL0qyIMURy/+Qo xiK6ene3xOHefM5FWQ5XxHLn5mgSZP2tV5KnviK8aLUvF2DuJj338kS7c2mrcxGd uEJ/AmcDtKziKUCOvlN6VNIf17/DS1kusD/slk5332mRcR3TYGY= =DvBf -----END PGP SIGNATURE----- Merge tag 'mvebu-dt64-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.5 (part 1) Few improvements following the dt bindings: - add missing cache properties - fix nand_controller node name according to YAML - fix pca954x i2c-mux node names Fix espressobin-ultra boot failure and wifi for EspressoBIN Ultra (Armada 3720) * tag 'mvebu-dt64-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: Fix espressobin-ultra boot failure and wifi arm64: dts: marvell: Fix pca954x i2c-mux node names arm64: dts: marvell: cp11x: Fix nand_controller node name according to YAML arm64: dts: marvell: add missing cache properties Link: https://lore.kernel.org/r/877cs3h87m.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
5bfea833dd |
MT6795:
- add GCE, MMSYS, IOMMU and PMIC wrapper nodes - Enable PMIC combo, eMMC and SDIO support to the Sony Xperia M5 MT7622: - add SPI-NAND chip and interrupt support for switch node to the BPI-R64 MT7986: - add PWM, thermal, efuse, auxadc and thermal zone nodes - BPI-R3 enable WiFi leds and enable PWM - BPI-R3 reserve more space on NOR and NOR flash to be able to store bl2 uncompressed - BPI-R3 add PWM fan for cpu cooling MT8173: - fine tune the regulator of the eDP pannel - use EDID for eDP panel instead of hard coded type MT8183: - add quirk for GIC problem for Kukui based boards to make "pseudo NMIs" work - provide fimrware name to SCP MT8186: - add USB, SPMI, ADSP, Global Command Engine (GCE) nodes - add nodes to enable display support - add cache coherent interconnect - add dynamic voltage scaling for CPU and GPU MT8192: - enable Bluetooth on the Hayato board - add quirk for GIC problem for Kukui based boards to make "pseudo NMIs" work - add cpufreq node and video decoder - add dma-ranges needed by the IOMMU rework - Fine tune capacity-dmips-mhz MT8195: - add thermal zones and video decoder - enable PCI ports on cherry (e.g. Acer Chromebook Spin 513 CP513-2H) to enable WiFi and Bluetooth combo. - add quirk for GIC problem for Kukui based boards to make "pseudo NMIs" work MT8365: - add watchdog, PMIC, MMC, USB OTG, ethernet nodes - add Operation Performance Points - PSCI node and CPU idle support Several SoCs: - advertise L2 and L3 cache as unified - add chasss-type -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmSLBqcXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH44Hg/9GnoPeuq7clM7jBcrF1r1Q3yC p3ffpX+5l89Y4umi8duJ69TS83jdVWeQ7pT8Yavpcp5OW2XhRB2w+81JvwdegjVY wOksdzsIstPT9D0Q9NaKBnpdZXqhTMR6VT55K6echuPKNo1jwVNNweAe81na0Pka bm9cG1jTS6zZ5lqHclCx7rLc1RGx7DtpeMybFTwR25ohMsJ0k9UZnJrOop+WOesh SF69El0dmGefcBtSHGd7kGLEhOHy1IsJnvCpYyA03h/Z99fBtRY3fRBK+w/Z+BVk Q9zNN9UXe9U76JVTHz0/tfT6xaU2zX0ad+rTMTIx0yGmJNw7pu/bsUq3iuyqsxEr VjGEt/uNSK30MF7Tz0iSndyzRYu7lGy2JPI3WfnlNxlGsoIOTqw8E6dtichHUWsP fhh42EV9+3C2HLBGMvhGF2N5GBX1CQz7oJBUVVNNyFJVD5NE/9C+LX3rxTLfubEN mNmvJCVq3fujMTakOFFsHERl5znpyuQiL0QqEAn6CYnbsa9WDRqqP34dWMscsOTF 16TtS8Lyy70Sv7yfy4ym8O6w1DnXQ1SkE+qpSk/TmYCbyrbaHaQx+tb3CaMb1wQm xgtejqIo5owBQnVAgJjUTtzwj8md+0AlwyyzLi+ZSFwzSPAijGijHEf7lIZTV300 9/cen7u8DneBE47Nko0= =729t -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSEyIACgkQYKtH/8kJ Uid37A//fHVhFmB75cpMOCsz+dD4pOs01UAZs8GKa/EkBMahrB4ts9DsLtWbhjIR NxxDFStQYlv6HXsHZkprg7nkx/W1NcmqX90tzP1JStC741WbC6pfJ3esaTuIogaA tuogV1aOGWGDBD0Kz2L1Uwn9LfXbQMQW24C3s7qORWg0ZJ3UjL8Av/JIr2xqg8t3 MAp6f1tpvFKa2YBYSTjY7VdgcLM3ZKS6fsWWzBVaNnU+a+4/NEXtiwuPphhJ0aWX HCie1S77fs1Kwew7aticdKitYClttn7ze21R15q0TFUj46MbXSPgG9syuDXM0ZqS de68APcL+UzZe4JUJnyVLrK2i9UQ7Y4NLGJf7KMQTma6MfFMCfS4IN9OydwYcnMt vb7DUPMi1N5eaQRld78pdAo5yBuGr1C4ZZc5pqku8Z5InMIjo9K+RT+jRXb47vfu gyT+O8OHXQEknzieGNRZASO6vrvN7ywOR/Mjh7djDU5P83CPFy9ShsvDPmq6mKX0 vEgaC+0IinyXmpL8kUm9h7PRnux3HHAbST7h9fWqmbqABAqTiybCn6+VJqAz971w faNAEV6snPsBPeN3a9+oPh+oLClRSaA5YG/u3kWx5+F+FogVExMpc6A7tKNLJYSC M8S2E/pzsb69uwvJK6Z54Qk6ihherE/SPOdpdj0SC61YEeUrr4s= =Jd/t -----END PGP SIGNATURE----- Merge tag 'v6.4-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt MT6795: - add GCE, MMSYS, IOMMU and PMIC wrapper nodes - Enable PMIC combo, eMMC and SDIO support to the Sony Xperia M5 MT7622: - add SPI-NAND chip and interrupt support for switch node to the BPI-R64 MT7986: - add PWM, thermal, efuse, auxadc and thermal zone nodes - BPI-R3 enable WiFi leds and enable PWM - BPI-R3 reserve more space on NOR and NOR flash to be able to store bl2 uncompressed - BPI-R3 add PWM fan for cpu cooling MT8173: - fine tune the regulator of the eDP pannel - use EDID for eDP panel instead of hard coded type MT8183: - add quirk for GIC problem for Kukui based boards to make "pseudo NMIs" work - provide fimrware name to SCP MT8186: - add USB, SPMI, ADSP, Global Command Engine (GCE) nodes - add nodes to enable display support - add cache coherent interconnect - add dynamic voltage scaling for CPU and GPU MT8192: - enable Bluetooth on the Hayato board - add quirk for GIC problem for Kukui based boards to make "pseudo NMIs" work - add cpufreq node and video decoder - add dma-ranges needed by the IOMMU rework - Fine tune capacity-dmips-mhz MT8195: - add thermal zones and video decoder - enable PCI ports on cherry (e.g. Acer Chromebook Spin 513 CP513-2H) to enable WiFi and Bluetooth combo. - add quirk for GIC problem for Kukui based boards to make "pseudo NMIs" work MT8365: - add watchdog, PMIC, MMC, USB OTG, ethernet nodes - add Operation Performance Points - PSCI node and CPU idle support Several SoCs: - advertise L2 and L3 cache as unified - add chasss-type * tag 'v6.4-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (51 commits) arm64: dts: mt7986: increase bl2 partition on NAND of Bananapi R3 arm64: dts: mediatek: mt8186: Wire up GPU voltage/frequency scaling arm64: dts: mediatek: mt8186: Add GPU speed bin NVMEM cells arm64: dts: mediatek: mt8186: Wire up CPU frequency/voltage scaling arm64: dts: mediatek: mt8186: Add CCI node and CCI OPP table arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts arm64: dts: mt7986: add thermal-zones arm64: dts: mt7986: add thermal and efuse arm64: dts: mediatek: mt8192: Fix CPUs capacity-dmips-mhz arm64: dts: mediatek: mt8192: Add missing dma-ranges to soc node arm64: dts: mediatek: mt8183: kukui: Add scp firmware-name arm64: dts: mt8195: Add video decoder node arm64: dts: mt8192: Add video-codec nodes arm64: dts: mediatek: Add cpufreq nodes for MT8192 arm64: dts: mediatek: mt8173-elm: remove panel model number in DT arm64: dts: mt7986: use size of reserved partition for bl2 arm64: dts: mt8173: Power on panel regulator on boot arm64: dts: mt7986: set Wifi Leds low-active for BPI-R3 arm64: dts: mt7986: add PWM to BPI-R3 arm64: dts: mt7986: add PWM ... Link: https://lore.kernel.org/r/27843c96-142e-930e-33b2-b634182e7cfa@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
055fdcac93 |
More Qualcomm ARM64 DTS changes for v6.5
This introduces support for the Qualcomm SDX75 platform, with the IDP reference board. On IPQ5332 the RDP474 board is added and on IPQ9574 the RDP454 is introduced. On SC8280XP, and hence Lenovo ThinkPad X13s, GPU support is added. For QDU1000, SDM845, SM670, SC8180X, SM6350 and SM8550 the RSC is added to the CPU cluster power-domain to flush sleep & wake votes as the cluster goes down. On IPQ5332 additional reserved-memory regions to improve post mortem debugging. UART1 is added. The MI01.2 board is renamed RDP441 and the RDP474 is added. On IPQ8074 critical thermal trip points are defined. As with IPQ5332 additional reserved-memory regions are used to improve post mortem debugging. Thermal sensors (tsens) are added and zones defined. The crypto engine is added, and support for the RDP454 board is added. Across MSM8916 and MSM8939 pinctrl state definitions are cleaned up and the purpose of msm8939-pm8916 is documented. MSM8939 has regulator definitions cleaned up, following to the previous effort on MSM8916. CPU Bus Fabric scaling support is added to MSM8996 Pro. On QCM2290 CPU idle states are added. For QDU1000 SDHCI is introduced and enabled on the IDP to gain eMMC support. IMEM and PIL information regions are defined for improved post mortem debugging. The Qualcomm Robotics RB2 kit gets its on-board buttons described. A few fixes are introduced for the newly merged SC8180X, in particluar the DisplayPort blocks are moved to the MMCX power domain to avoid power being reduced prematurely during boot. The SC8280XP GPU is added and enabled for the Lenovo Thinkpad X13s, and resets for the soundwire controllers are added. The OUI is specified for ethernet phys on SA8540P Ride platform, to avoid reset issues. Charger description is added to the PMI8998 PMIC and enabled across OnePlus 6/6T, SHIFT SHIFT6mq and Xiaomi Pocophone F1. On SM6350 CPU idle states and UART1 are added. And SM6375 gains GPU clock controller and IOMMU definitions. The Fairphone FP4 gains Bluetooth support. SM8150 is transitioned to use 2 interconnect-cells, and the USB interconnect path is described to ensure buses are adequately voted for. The same changes are done for SM8250, and the resolution of the static framebuffer on Sony Xperia 1 II and 5 II are corrected. The USB bus paths are also added to SM8350, SM8450 and SM8550. On SM8550 DisplayPort nodes are added, as is the PWM controller for driving the notification LED and the RTC is enabled. For the MTP and QRD boards, the soundcard and audio codecs are defined. A Tegra change, related to LP855X binding changes, was accidentally picked up and dropped again later. A number of DeviceTree fixes identified through validation was introduced as well. Additionally a few nodes got their default status changed to avoid unnecessarily having to enable them (e.g. the mdp/dpu node). -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmSLOjsVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FlyUP/0PZFIRutqnwwr/daOZAhDgw6pQW jseUFIUb9yKan8KJZcHOf38xxqfj/bllQQNIQeM8qw03e7LJf/Mcteg3FYNgxD9m vAWdQby2ZBcAYy3Qxjc3H+cb2fPV8yEJZ4JX/yOuLPfx9zE8HMoT8M9JBHZlZc8T 0fzgVxqRz1wt5Qjzv+BsWg4GUiTARtRbYxDVzdFZFDF6f7Xcpdsq+HaImJdYisXh m/2lQ34rDBTVOMN6Og5U7lGjfCyk6hn3k0OoSpObLRBNV34JH6ViDVhmNbFWKNNS QGFDAEa+jjQDrEo2cUHiHfnlKzcQpheLoco7MNkzDwy/8Rd3/k3ndj/+oCpgGea5 VFTb0LygJPQnHfggzpxc+v2pBfoocEUvKrI+sluXeNnLua+jvlLz6Z8Wm6mVaBZv hzw4NqaXHRtzqgjo/37t7Hwns+uyd+rg/gjh8xfdu65/kVZiTstK1BGVCoKMs1LD J0UcQGaevfBH9+EYNcKly5qjEMhsUxwn4i7oyjerdQ7Wt4nwzPqfs7zv513Ns5bO eLG49FsCZjzvAn4AC3R1POPVrP2RBg/zeBzL/34gkgBLr/TR1k1zyPWxovb6Tuq9 8R3T4XBA1kwh1c7R5av1033dyvW4N8y6vp9z+kExuPz4qQ+SsWKoXAeM2budkTQ/ c3oBU6U+BH9oCvSV =Fga/ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSEgoACgkQYKtH/8kJ UifYRg//Uu6CMkGFJCfMVNS8Z0lykAW3FtEupzi+lWVP+2i+QsR8FXTZ3EumyBA6 QoRX1FtEKtRdJatMUgWlCbv8newKiII9fwKrV/EK7u/CTC79zX9ak3DonxXu7Z2i a6dzH5GVnHfVe7BTQdJuOylxKneMNNECmnkYYUWry1LES1zLhUZy67GsdbDSCxpF evzT8ly6NLSSJOJKXlcmwzcGMXhi7HrCdvsZhPdJZ1cN8c/tfrj+S8kmHxs5Qw3B TOjFi14w2CA/duvwQLV+0KIuHc/Vn8oYI0NnD96aahlZA+QFMk1hsdeETtXL6guf S4FKB+PNVtFnMCMq25xsTOaqEKjse8+xBgTN9TAvB67TJUQ3J2zibn1jjaGjtej7 w2ry8FC/pgSFbs9KftAL7mDFCICo7qyOhpfuuG+s+ti1m7h5Fon2a+UKc0T0m80w qR1YXohi6rzXTlcV92m2CRZIvSBPf1UQAnFqyjZBIvePpD8/TqYs2M+IIM0dmaBC Xs+n+3ORIte7hws5BodXaWwsi0NTFm8rQaeK94Cj100kWMxrKZS5JIIdZ/Dy0rRk LXWKj1W4h6rrwM34r5oeyc0k9pYoc7coDItEqu8VyKz7pj9rjcG8B+lqdp6QjNK+ +gNnVF4UmEbRpG6EZm9uC9IshiIQp/8DhO/lRZMb37v1YEB6/mg= =ThxV -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm ARM64 DTS changes for v6.5 This introduces support for the Qualcomm SDX75 platform, with the IDP reference board. On IPQ5332 the RDP474 board is added and on IPQ9574 the RDP454 is introduced. On SC8280XP, and hence Lenovo ThinkPad X13s, GPU support is added. For QDU1000, SDM845, SM670, SC8180X, SM6350 and SM8550 the RSC is added to the CPU cluster power-domain to flush sleep & wake votes as the cluster goes down. On IPQ5332 additional reserved-memory regions to improve post mortem debugging. UART1 is added. The MI01.2 board is renamed RDP441 and the RDP474 is added. On IPQ8074 critical thermal trip points are defined. As with IPQ5332 additional reserved-memory regions are used to improve post mortem debugging. Thermal sensors (tsens) are added and zones defined. The crypto engine is added, and support for the RDP454 board is added. Across MSM8916 and MSM8939 pinctrl state definitions are cleaned up and the purpose of msm8939-pm8916 is documented. MSM8939 has regulator definitions cleaned up, following to the previous effort on MSM8916. CPU Bus Fabric scaling support is added to MSM8996 Pro. On QCM2290 CPU idle states are added. For QDU1000 SDHCI is introduced and enabled on the IDP to gain eMMC support. IMEM and PIL information regions are defined for improved post mortem debugging. The Qualcomm Robotics RB2 kit gets its on-board buttons described. A few fixes are introduced for the newly merged SC8180X, in particluar the DisplayPort blocks are moved to the MMCX power domain to avoid power being reduced prematurely during boot. The SC8280XP GPU is added and enabled for the Lenovo Thinkpad X13s, and resets for the soundwire controllers are added. The OUI is specified for ethernet phys on SA8540P Ride platform, to avoid reset issues. Charger description is added to the PMI8998 PMIC and enabled across OnePlus 6/6T, SHIFT SHIFT6mq and Xiaomi Pocophone F1. On SM6350 CPU idle states and UART1 are added. And SM6375 gains GPU clock controller and IOMMU definitions. The Fairphone FP4 gains Bluetooth support. SM8150 is transitioned to use 2 interconnect-cells, and the USB interconnect path is described to ensure buses are adequately voted for. The same changes are done for SM8250, and the resolution of the static framebuffer on Sony Xperia 1 II and 5 II are corrected. The USB bus paths are also added to SM8350, SM8450 and SM8550. On SM8550 DisplayPort nodes are added, as is the PWM controller for driving the notification LED and the RTC is enabled. For the MTP and QRD boards, the soundcard and audio codecs are defined. A Tegra change, related to LP855X binding changes, was accidentally picked up and dropped again later. A number of DeviceTree fixes identified through validation was introduced as well. Additionally a few nodes got their default status changed to avoid unnecessarily having to enable them (e.g. the mdp/dpu node). * tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (94 commits) Revert "arm64: dts: adapt to LP855X bindings changes" arm64: dts: qcom: sc8280xp: Enable GPU related nodes arm64: dts: qcom: sc8280xp: Add GPU related nodes arm64: dts: qcom: msm8939-pm8916: Mark always-on regulators arm64: dts: qcom: msm8939: Define regulator constraints next to usage arm64: dts: qcom: msm8939-pm8916: Clarify purpose arm64: dts: qcom: msm8939: Fix regulator constraints arm64: dts: qcom: msm8939-sony-tulip: Allow disabling pm8916_l6 arm64: dts: qcom: msm8939-sony-tulip: Fix l10-l12 regulator voltages arm64: dts: qcom: msm8939: Disable lpass_codec by default arm64: dts: qcom: msm8939-pm8916: Add missing pm8916_codec supplies arm64: dts: qcom: qrb4210-rb2: Enable on-board buttons arm64: dts: qcom: msm8916: Drop msm8916-pins.dtsi arm64: dts: qcom: msm8916/39: Rename wcnss pinctrl arm64: dts: qcom: msm8916/39: Cleanup audio pinctrl arm64: dts: qcom: apq8016-sbc: Drop unneeded MCLK pinctrl arm64: dts: qcom: msm8916/39: Consolidate SDC pinctrl arm64: dts: qcom: msm8916/39: Fix SD card detect pinctrl arm64: dts: qcom: msm8996: rename labels for HDMI nodes arm64: dts: qcom: sm8250: rename labels for DSI nodes ... Link: https://lore.kernel.org/r/20230615162043.1461624-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
af3c684721 |
TI K3 device tree updates for v6.5
New Boards:
phyBOARD-Lyra-AM625 Board support
Toradex Verdin AM62 COM, carrier and dev boards
New features:
Across K3 SoCs:
- Error Signaling Module(ESM) and Secproxy IPC modules
- On board I2C EEPROM
- Voltage Temp Monitoring (VTM) module
- DM timers (GP Timers)
J784s4:
- R5 and C7x DSP remoteproc, ADC, QSPI
AM69:
- Addition of more peripherals: CPSW, eMMC, UARTs, I2C et al
J721s2:
- USB, Serdes, OSPI, PCIe
AM62a:
- Watchdog
J721e:
- HyperFlash/HyperBus
AM62:
- Type-C USB0 port
Cleanups and non-urgent fixes
Particularly large set of cleanups to get rid of dtbs_check errors and
dtc warnings:
- Addition of missing pinmux and uart nodes for AM64, AM62x, AM62A,
J721e, J7200 that are used by bootloader
- Split Pinmux regions/range to avoid holes for J721s2, J7200, J784s4
- Drop bootargs and unneeded aliases across all K3 SoCs
- Move aliases to board dts files from SoC dtsi files
- Move to generic node name for can, rtc nodes on am65
- s/-pins-default/default-pins/ to match upcoming pinctrl.yaml update
- Fix pinctrl phandle references to use <> as separator where multiple
entries are present
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmSLMAwQHHZpZ25lc2hy
QHRpLmNvbQAKCRDERh5FfJEW46tOCACQt9vBouxA7pmH+oerqdf8VDqJbjDsgnTx
kU3BUBLZn5qIJkeLqkoH5MueuE/H74mKKNBtRooAcRyUD9aZuxh/QC1/g2ITajWt
ndeHQzE6Hh4rNRtDrhp8CCU1FJdr8Ay3bqzPOOxwQKivFST2/i7+SbK0y8LnUN1B
QRoawzm0kaGH5tG41e5lbVsrIvG24MSoGq7PXrcCDMqD02cGOV0PBghZbUbmGMKG
sLPdbrh0uOHK8X6HNxUtOH3wKlQHHNU4RXGq8hoXlWQaf0Rdfd2fPPAioZVNJO+s
hPhSKCJIVkP7BhB1CpAVH1BKhWGaL7pEsBnUoDTeP7pFpxZF7qcD
=2tWW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fJ6G
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.5
New Boards:
phyBOARD-Lyra-AM625 Board support
Toradex Verdin AM62 COM, carrier and dev boards
New features:
Across K3 SoCs:
- Error Signaling Module(ESM) and Secproxy IPC modules
- On board I2C EEPROM
- Voltage Temp Monitoring (VTM) module
- DM timers (GP Timers)
J784s4:
- R5 and C7x DSP remoteproc, ADC, QSPI
AM69:
- Addition of more peripherals: CPSW, eMMC, UARTs, I2C et al
J721s2:
- USB, Serdes, OSPI, PCIe
AM62a:
- Watchdog
J721e:
- HyperFlash/HyperBus
AM62:
- Type-C USB0 port
Cleanups and non-urgent fixes
Particularly large set of cleanups to get rid of dtbs_check errors and
dtc warnings:
- Addition of missing pinmux and uart nodes for AM64, AM62x, AM62A,
J721e, J7200 that are used by bootloader
- Split Pinmux regions/range to avoid holes for J721s2, J7200, J784s4
- Drop bootargs and unneeded aliases across all K3 SoCs
- Move aliases to board dts files from SoC dtsi files
- Move to generic node name for can, rtc nodes on am65
- s/-pins-default/default-pins/ to match upcoming pinctrl.yaml update
- Fix pinctrl phandle references to use <> as separator where multiple
entries are present
* tag 'ti-k3-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (153 commits)
arm64: dts: ti: Unify pin group node names for make dtbs checks
arm64: dts: ti: add verdin am62 yavia
arm64: dts: ti: add verdin am62 dahlia
arm64: dts: ti: add verdin am62
dt-bindings: arm: ti: add toradex,verdin-am62 et al.
arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625
dt-bindings: arm: ti: Add bindings for PHYTEC AM62x based hardware
arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename
arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom
arm64: dts: ti: k3-am64: Add ESM support
arm64: dts: ti: k3-am62: Add ESM support
arm64: dts: ti: k3-j7200: Add ESM support
arm64: dts: ti: k3-j721e: Add ESM support
dt-bindings: misc: esm: Add ESM support for TI K3 devices
arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom
arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux
arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom
arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux
arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header
arm64: dts: ti: k3-j721s2: Fix wkup pinmux range
...
Link: https://lore.kernel.org/r/7fe0c6de-cb99-9c89-8583-b3855fde16f8@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
5e64ee4204 |
arm64: ZynqMP DT changes for v6.5
Various small fixes and cleanups to be aligned with the latest dt-schema. Other major changes are: - Wire mali-400 gpu - Change board name for zcu1275 - Use ethernet-phy-id to handle ETH phy reset properly - Switch to amd.com emails - Update people in DT bindings -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZIHGHgAKCRDKSWXLKUoM IQW2AJ0eRZ5g7SYEg1y/zir6/j5s4RyaiACeO9EQJQ8nKkez73w4uoTBdmmOmlY= =R8F0 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSEQgACgkQYKtH/8kJ UidFLBAAyqGoiZH0Oh33f6R2nU1+NtH6pTiv4P1z1v8WmIMEvShHk+WhpGllqryC rQKFwMdTIM3L2+zqYvUM5ksysBnbxePVVTV15qZaDpkbV1/Oz/G70EWF0VtGQYxk /OLiMc84WMfaR772Htlb1mmos+9TtSlIwi5f0vkWRCOComPh+vc3u+GedUVBA3M/ 9J0VuymgBeE9H4pGOruTNn1aUxD70hTXiP6Qz7Sv7Eksew80GfGlpNf5EqFM6Lrc /Np03tHVN1lMLDmSbeHRM9ONDQDSEDM2IT0tvN9XH/p1vzKCBpRxHh7/7DVnJdae G/NUGzw9uxZkmvKkXpjTRjYO08GQu6DxwO4G6qBOA9Rr77ibohVdLEvtfpfkwLxO D9oFmi2NZjtyWii5G0xZkfnuB6aU9x2BsPRQduLTfTEYTWoJuoFnmBM/Zhinj0vO 2h0+2PqoT0LpwzcorsbCsk3mHPz0kqc3tNGOd2hGtRvmm2fLxoNbj0OqhLgFLYht OUetwTNqWogKUEzjES526v6ulkAKWkSc0OrXOZkDVyWHCDdEQCMR121GlC6Qo5LK 5OLa2rR5iQ6Er6+N1lzg4AjB5s2k/C40K/pNQIm65uTB4D4YcCvcUABRuRMeR+Nn FlgXDPPyytnZdNhRPt7AhFk10r+AbT8ad3LwjHEQlUT1Mxm+eck= =jqDa -----END PGP SIGNATURE----- Merge tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx into soc/dt arm64: ZynqMP DT changes for v6.5 Various small fixes and cleanups to be aligned with the latest dt-schema. Other major changes are: - Wire mali-400 gpu - Change board name for zcu1275 - Use ethernet-phy-id to handle ETH phy reset properly - Switch to amd.com emails - Update people in DT bindings * tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx: (33 commits) dt-bindings: usb: xilinx: Replace Manish by Piyush dt-bindings: xilinx: Remove Rajan, Jolly and Manish arm64: zynqmp: Used fixed-partitions for QSPI in k26 arm64: zynqmp: Add pmu interrupt-affinity arm64: zynqmp: Set qspi tx-buswidth to 4 arm64: zynqmp: Fix usb node drive strength and slew rate arm64: zynqmp: Describe TI phy as ethernet-phy-id arm64: zynqmp: Switch to amd.com emails arm64: zynqmp: Convert kv260-revA overlay to ASCII text dt-bindings: xilinx: Switch xilinx.com emails to amd.com arm64: xilinx: Use zynqmp prefix for SOM dt overlays arm64: zynqmp: Add phase tags marking arm64: zynqmp: Describe bus-width for SD card on KV260 arm64: zynqmp: Enable AMS on SOM and other zcu10x boards arm64: zynqmp: Enable DP driver for SOMs arm64: zynqmp: Setup clock for DP and DPDMA arm64: zynqmp: Switch to ethernet-phy-id in kv260 arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2 arm64: zynqmp: Add pinctrl emmc description to SM-K26 arm64: zynqmp: Add gpio labels for modepin gpio ... Link: https://lore.kernel.org/r/CAHTX3d+2s_KmCnd=x5hydGb+LYoznAzYGTizvqqN2NFmrBurfw@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Sam Protsenko
|
12109610a5
|
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
As described in the corresponding binding documentation for "samsung,exynos850-pmu", the "clocks" property should be used for specifying CLKOUT mux inputs. Therefore, the clock provided to exynos850 pmu_system_controller is incorrect and should be removed. Instead of making syscon regmap keep that clock running for PMU accesses, it should be made always running in the clock driver, because the kernel is not the only software accessing PMU registers on Exynos850 platform. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20230308233822.31180-8-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230612180102.289745-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
d0b5886bee |
New boards are
- Indiedroid Nova (rk3588) - Add Edgeble Neural Compute Module 6B (rk3588) - FriendlyARM NanoPi R2C Plus (rk3328) - Anbernic RG353PS (rk3566) - Lunzn Fastrhino R66S / R68S (rk3568) The rk3588 got a lot of attention and gained support for the GIC ITS (needed an errata from Rockchip), timers, otp memory, saradc and sdio. The rk356x got support for its RGA block With all the core improvements to rk3588 support, the Rock5b got a lot improvements from that too, namely support for its PMIC, sd-card and saradc, as well as a clock-rate fix for its es8316 codec. Similarly the rk3588-evb1 also got support for its PMIC. The Anberic RGxx3 series got a better bluetooth compatible and updates to its LEDs to make them use the PWM blocks they're connected to. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmSGNgkQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgZKNCACYvQvOTfXL9HMlYQ2Fftzm3GEa9IVUVAr2 qgKiGj+cUm9y2O7eQBl/GF+6KyCnBxjh+697lAsZtEz7M6onEi9WVjsISl2dLq7Y 4FOMWRTbzjzdMrEfg3mUUgcoMkvGkuAV8gwMTV6VKBDEegZm2/SFGQv76NpJy8Zy 7HewtUKNggQ2OO1z6/umsreKS5qxqcRsw37fAq+dUGtJb2v71kmvYL8aiGHpy5sK +fNxE1znXqcNu60btk+6iltXQ9tGlqH/lEH/gsCQ3uEgCLX9BId3vXyHPBVm9NiZ qfMO7DJWioTjybZ0rHWh8eSkQ/DCAd+2ZQmoLtC4s/f1EkeK7jve =V9LX -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSEDYACgkQYKtH/8kJ UifxHRAAw5jJdUvdZc1YkRJ3KvO4eu5fCzUaWFobM7YhztQ+mt4v8KZ1fDsN/oME V9Y1tGhjqL5NSRIhTyPvMzx4+jGor9PtiXMWVd35oqPY2lEeni94p8pXMipuZ6SE 7ifY+bioB5QX4QtmXrzrRNcD/s1mANGZCUaPcUOPyjkIc5qAVq5Eb1n/H2OuP56m V0gWXZB8gMibdq3tkG4shuwFTgbRd3pBNDiI1YR1M42BSOBUoIZoxg/IwP1MPgE0 tpeG9SqANTu6pBIrlgTLozRJdyV29EeCZ+Cp+qbRKtqd4SWLf/+FyxuAEAP7wPi+ r0ty3KaAMpFK+5zIlptDCCfTOnrgO5tweJHWfbem24nL73kFaQicT+l4b4WLh3oW 1YPhxWktsFhzkO+2IcnBUpb2GSHvasObxvzoMep1rZzy9D0W2OfiUroUJjcAEl6b NJuOUSDZaGo0XLv5EuJ8A6S3/4HQIS3HkJS47bD3TxMfj8jejCTF/Q79KCDqe3ub EsWfjKDxBFMoTlanZy2iLnudkKIAiD/mcjHfZAHCpmSq2y0z1JC70YEICDHcp9iT PRmDM0A9j0+csPUQ7YKZGpLHU/+/FNsJlVxAb2GWQ82HHrIULdqyXtbMJGjlv4j9 qCmDnhxOeMeTQcG270CAuf5LRYI9Fp5YlcIXAnk5V4+N8vCNbko= =QogT -----END PGP SIGNATURE----- Merge tag 'v6.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards are - Indiedroid Nova (rk3588) - Add Edgeble Neural Compute Module 6B (rk3588) - FriendlyARM NanoPi R2C Plus (rk3328) - Anbernic RG353PS (rk3566) - Lunzn Fastrhino R66S / R68S (rk3568) The rk3588 got a lot of attention and gained support for the GIC ITS (needed an errata from Rockchip), timers, otp memory, saradc and sdio. The rk356x got support for its RGA block With all the core improvements to rk3588 support, the Rock5b got a lot improvements from that too, namely support for its PMIC, sd-card and saradc, as well as a clock-rate fix for its es8316 codec. Similarly the rk3588-evb1 also got support for its PMIC. The Anberic RGxx3 series got a better bluetooth compatible and updates to its LEDs to make them use the PWM blocks they're connected to. * tag 'v6.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits) arm64: dts: rockchip: Add saradc node to rock5b arm64: dts: rockchip: Fix compatible for Bluetooth on rk3566-anbernic arm64: dts: rockchip: Add SD card support to rock-5b arm64: dts: rockchip: add PMIC to rock-5b arm64: dts: rockchip: Assign ES8316 MCLK rate on rk3588-rock-5b arm64: dts: rockchip: Add Indiedroid Nova board dt-bindings: arm: rockchip: Add Indiedroid Nova dt-bindings: vendor-prefixes: add Indiedroid arm64: dts: rockchip: Add sdio node to rk3588 arm64: dts: rockchip: add default pinctrl for rk3588 emmc arm64: dts: rockchip: Add DT node for ADC support in RK3588 arm64: dts: rockchip: add PMIC to rk3588-evb1 arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B IO arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B SoM arm64: dts: rockchip: Add Rockchip RK3588J dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 6B arm64: dts: rockchip: Add RGA2 support to rk356x media: dt-bindings: media: rockchip-rga: add rockchip,rk3568-rga arm64: dts: rockchip: Add rk3588 OTP node arm64: dts: rockchip: Add FriendlyARM NanoPi R2C Plus ... Link: https://lore.kernel.org/r/3239799.44csPzL39Z@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
60c2f542a7 |
Qualcomm ARM64 DeviceTree updates for v6.5
This introduces the RDP442 and RDP433 reference devices on IPQ5332 and IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574 are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is added. Support for Acer Apire 1, built on the Snapdragon 7c platform is introduced. Fxtec Pro1X on SM6115 is added. Lastly long floating support for SC8180X and the Lenovo Flex 5G, and the Primus reference device, has been added. On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described above the RDP442 board on the prior. Download mode support and various reserved-memory regions are also introduced on IPQ6018. IPQ8074 gains another SPI controller. On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog, qfprom, SMEM and RPM are introduced. As are support for four new board, mentioned above. MSM8916 gains a range of structural improvements, to better suite the various boards supported. Regulator constraints are corrected and their states are adjusted to match reality (e.g. always-on regulators marked as always-on). BQ Aquaris X5 gains support for front flash LED. As mentioned above, MSM8939 support is introduced with support for boards from Sony and Square. MSM8953 gains DMA support in I2C masters. MSM8996-based Sony Xperia boards gains description of their RGB notification LED. On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU, AOSS, watchdog and missing low-speed controllers are added. On the Ride platform UFS, USB and an i2c bus are enabled. iommu properties are added to QSPI on both SC7180 and SC7280. LPASS clocks are adjusted and MDP node cleaned up slightly, on SC7180. As mentioned above, support for Acer Aspire 1 is introduced. Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the Primus reference device has been merged. On SC8280XP ethernet is added and enabled on the automotive ride platform. An SDC controller is introduced and enabled on the SC8280XP CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB SuperSpeed phy is added to the Type-C graph, to enable support for orientation switching. Fairphone 3 gains support for its notification LED. On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains support for flash LED and the RB3 (DB845c) board gains support for bonded/dual DSI-mode, to allow 4k output. On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY are introduced. As mentioned above Fxtec Pro1X is introduced. On the QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display, CAN-bus and GPIO LEDs are introduced, fixed regulators are described and the SD-card description is corrected. Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5 gains SD-card support, camera regulators and GPIO line names sorted out. SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5 II gains support for hardware video accelerator. Crypto engine is introduced for SM8350 as well. The HDK gets the USB Type-C graph described for Superspeed orientation switching and DisplayPort output. On SM8450 video clock controller and crypto engine are added, missing opp levels are introduced and the USB Type-C graph is defined for orientation switching and altmode. SM8550 gains GPU and video clock controllers and missing opp levels are added. The WCD9385 audio codec is added for the SM8550 MTP and on the QRD PCIe, USB, audio display and flash LED are added. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmSFGfkVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FeKoP/RFCA0hnqP0TGgzQq7TV1//WbVuZ 5fxpWhSKYeb6e+oOJZdu/Xi7VwSWesZwQQkMRaEOXUpMGhtWBfLQEHc6FQiAzGkv h3GrOLQ1qqmfYEqDxYv4CgKjpO+w5Zx2uNOZkbRDRumT0EQ45T0hypYmRefBPq8s bOxNmRgY6goNZalZBb0HWvdZtfYB1tlrjVn5+rpEZb031KGhCSOH8SWx8wUdUHrj 7EYR4EeQQsJZETiinU3F8l69eNUBwAi8TAW350A3nJj+FPZqwVhIhQKCR/bCZqXC U9vwcaqgYKi8rY5FR+bwJsiX4hY8W9bjq7pzrJyNvXsLtIeJ3jRnbF8z4SvNitOF UMOkQ9f6WrToRNSrwFhLB/ipV/TbnnE/MNzIxCwQ5W1BRYn7Tri1Ws61I/Kl1/ML eOWl6CSWzNW5lfkHumdOzydd4T43ECqqgNLEBTCpNRo7d/4XN/TCUK4tWJqb+4ou 1aOG6/ujy6uhlocd0mZ1xPMDBrFNCrC4/BRj2hCmbuBE3Qs/AHHrF5LLMTkZBKHd Mip2gUKwqi2p4l0/KJxSSj0snrifUqU5V1QCchwcMFmt62mrfRU2u7Xoy9s7vlyP pbQEF/Pu91Yr5nUiBQEU77L5a9tTm0eI1iFl8GwBzZP7R46ahnAu3BQc/MXaPax/ Z9hrTrB9y610Iuzy =OvdD -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSD3wACgkQYKtH/8kJ UidMjQ//YH19+b3UZ3O4r3sIoGTNB1rajNHCX72wwzQAdaHSMOTOUdkXradtstyp EPNyChMERvBGq2i16B0mEk9IiQ4y4CVwR9l3FZcaasV25RhfcGX3K1Wqxuepc1Hu OELo8W9Ih7rSg7paNj6YfJq1ka+AldZWPvtQG000czq59ZnUn7JvEeW7hd5BOdCJ O5RloIxHhLIOSyyc+sK0d3hXLjcZ8Od0Pnu/QYMzslmtc7YLaRgs0F5pxwz51k/P Uc+eOscCGcSHilmW7IE/IlevElg0GssyRn/BZ5121tMMKEYjEeR0EUy7I8zPaG45 osKJQ5R7NBd2h185ZXprskd9drvQ8uwv8kxRs5GFF+cK+3PE3TtoipmBycEQROcH 7WkQg7ffiPXT7Na+yTWqUXwnwzr/nhir7HTVx7VgBqmdUIzJKdqAbVLw/PTm0B6M QXUZfIS8gZFLePYwzkYqhYcTgtT6ZfEY5aN2/vpI0xyZsU0Z6nbFzPxlI+4rlDXm eZ7nD42RzifEqJUm7yKwGPkyY1U8rbwh4kNdaxZPk4ouB1puEYbF+Neo95MKlpRY ODEz0u6oVvJ2Ddg/RxFDtwB3hUXupc2qZcE92Smq4Two9wjgTkuSb3A3+8CEjXqH VFhBY65NxnwVEaabxE4wK9+wnLUnswza988BkkY7YrI+G8EZJL4= =jxMR -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM64 DeviceTree updates for v6.5 This introduces the RDP442 and RDP433 reference devices on IPQ5332 and IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574 are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is added. Support for Acer Apire 1, built on the Snapdragon 7c platform is introduced. Fxtec Pro1X on SM6115 is added. Lastly long floating support for SC8180X and the Lenovo Flex 5G, and the Primus reference device, has been added. On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described above the RDP442 board on the prior. Download mode support and various reserved-memory regions are also introduced on IPQ6018. IPQ8074 gains another SPI controller. On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog, qfprom, SMEM and RPM are introduced. As are support for four new board, mentioned above. MSM8916 gains a range of structural improvements, to better suite the various boards supported. Regulator constraints are corrected and their states are adjusted to match reality (e.g. always-on regulators marked as always-on). BQ Aquaris X5 gains support for front flash LED. As mentioned above, MSM8939 support is introduced with support for boards from Sony and Square. MSM8953 gains DMA support in I2C masters. MSM8996-based Sony Xperia boards gains description of their RGB notification LED. On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU, AOSS, watchdog and missing low-speed controllers are added. On the Ride platform UFS, USB and an i2c bus are enabled. iommu properties are added to QSPI on both SC7180 and SC7280. LPASS clocks are adjusted and MDP node cleaned up slightly, on SC7180. As mentioned above, support for Acer Aspire 1 is introduced. Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the Primus reference device has been merged. On SC8280XP ethernet is added and enabled on the automotive ride platform. An SDC controller is introduced and enabled on the SC8280XP CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB SuperSpeed phy is added to the Type-C graph, to enable support for orientation switching. Fairphone 3 gains support for its notification LED. On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains support for flash LED and the RB3 (DB845c) board gains support for bonded/dual DSI-mode, to allow 4k output. On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY are introduced. As mentioned above Fxtec Pro1X is introduced. On the QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display, CAN-bus and GPIO LEDs are introduced, fixed regulators are described and the SD-card description is corrected. Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5 gains SD-card support, camera regulators and GPIO line names sorted out. SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5 II gains support for hardware video accelerator. Crypto engine is introduced for SM8350 as well. The HDK gets the USB Type-C graph described for Superspeed orientation switching and DisplayPort output. On SM8450 video clock controller and crypto engine are added, missing opp levels are introduced and the USB Type-C graph is defined for orientation switching and altmode. SM8550 gains GPU and video clock controllers and missing opp levels are added. The WCD9385 audio codec is added for the SM8550 MTP and on the QRD PCIe, USB, audio display and flash LED are added. * tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (195 commits) arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G arm64: dts: qcom: sc8180x: Introduce Primus arm64: dts: qcom: sc8180x: Add pmics arm64: dts: qcom: sc8180x: Add display and gpu nodes arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes arm64: dts: qcom: sc8180x: Add PCIe instances arm64: dts: qcom: sc8180x: Add QUPs arm64: dts: qcom: sc8180x: Add thermal zones arm64: dts: qcom: sc8180x: Add interconnects and lmh arm64: dts: qcom: Introduce the SC8180x platform arm64: dts: qcom: msm8916: Move aliases to boards arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec arm64: dts: qcom: msm8916/39: Clean up MDSS labels arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm arm64: dts: qcom: qrb4210-rb2: Enable USB node arm64: dts: qcom: sm6115: Add USB SS qmp phy node arm64: dts: qcom: ipq5332: add support for the RDP442 variant dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family ... Link: https://lore.kernel.org/r/20230611004944.2481596-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
70cdf5e28c |
i.MX arm64 device tree for 6.5:
- New board support: i.MX8MM based Emtop SoM & Baseboard, NXP i.MX8MM EVKB board, i.MX8MP based Gateworks Venice gw7905-2x device. - A series from Adam Ford to add Camera and Audio support for i.MX8M based Beacon boards. - Add Audio output support for i.MX8MP TQMa8MPxL/MBa8MPxL board. - Add HDMI and display support for imx8mm-evk and imx8mm-phg board. - Add coresight trace devices support for i.MX8MP SoC. - A couple of changes from Krzysztof Kozlowski to add missing cache properties. - A couple of changes from Laurent Pinchart to add CSIS and ISI devices for i.MX8MP SoC. - A series from Marek Vasut to add more devices for i.MX8MP, and enable SAI audio on i.MX8MP DHCOM PDK2 and PDK3. - Correct GSC vdd_bat data size for Gateworks Venice devices. - Add more device support for i.MX93, Watchdog, OCOTP, idle states, DDR performance monitor, etc. - Small and random clean-ups and device node additions. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmSEIZkUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM5FoQgAmYm6yCkd8nnQqYKDlpvPmlPhQQrg tL2oQ1dFpxiAK7IZEkzU1q4dcI+uzRi2WV3kZglo0GH329iaL4qVtdVK2AEpyStF M9ri1GXd8fuN/37ZZtse54l3qRiA+R3bOlx3Zy54LspEpQlc+NjL1mNvQ+VURWhh ppWGVKwRJpdZsYicLmQ9mYNpqqIpV20WLa0Y8aCPqew80vcpt7lX2BuQ2grtflDS TQktST5JYCwWtRORsNT/5/4qZxIEO6g39PiXU5zdViqk9Ud5Ihr2ANLX3USpKByI OKRWfJRgjGGbviel7GF14IXJal6HatwotaXyqY4QRr9q9srjCMe7D5fM/w== =8wAA -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSDswACgkQYKtH/8kJ Uier8g//VF1OsOzJLaWBsSSd5hzbN9qx+xei+jKUf1cm2tllta0cd+ZKpcUPeQSM +NRyzvYR54M9jjnAGgnavTQH2pl5J/mBv4Fx9UNY+3TpMpD76TDNKYRGD+LoYbvF 6Vj+JXbCdfQg++303PQvVeKtDhSn1K7B8A2b+oNmOJE2OJbmehwD2vlvCD+bjMNB dE9gACBK580VA6fafg+hskgdW1TlMLbdWK7krStOEl8RHXzovl2torAAc+MGNz4H uGcrJUQHRTmtayXg194mb0zPlOg1BJhtYUCEJLBwhK7H+Gtnz5SyKv4FUzs2qFzC YmO2Xqxl4zr0kFEek5gXipUVXCCFfSDTc9RZ56tPLtDUH++0npIAb1kxL2WVQ/b6 fLRD5lsbMiuyIkEPMtDQwDesw0Zige4PZrL8aGg4k0HjC1Fv6ZuPeLd2ZBzVCEQU tplIJFf2JdnzUDXhodXftxPNzqIkAjLtp3crozQE62py2HB9PGmJr/m3/p0vnSXk czHPlR0G7SgT+owwe2HBAQxwamSTe+Oaxk+VJ6kYaTbDG7jaMjKlWCh+5rMSYEI7 DL0Pp8FT/jKjmL+O9+7zojB+M7a0L2ZJJRnCBw2uplNi1AMseRXCWgATtxUO87Ts CHgDPfIiM27NaS+ADIpjznVObQ9wwYHNLB1Tf1w4mOtjxgJ21kQ= =co0D -----END PGP SIGNATURE----- Merge tag 'imx-dt64-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm64 device tree for 6.5: - New board support: i.MX8MM based Emtop SoM & Baseboard, NXP i.MX8MM EVKB board, i.MX8MP based Gateworks Venice gw7905-2x device. - A series from Adam Ford to add Camera and Audio support for i.MX8M based Beacon boards. - Add Audio output support for i.MX8MP TQMa8MPxL/MBa8MPxL board. - Add HDMI and display support for imx8mm-evk and imx8mm-phg board. - Add coresight trace devices support for i.MX8MP SoC. - A couple of changes from Krzysztof Kozlowski to add missing cache properties. - A couple of changes from Laurent Pinchart to add CSIS and ISI devices for i.MX8MP SoC. - A series from Marek Vasut to add more devices for i.MX8MP, and enable SAI audio on i.MX8MP DHCOM PDK2 and PDK3. - Correct GSC vdd_bat data size for Gateworks Venice devices. - Add more device support for i.MX93, Watchdog, OCOTP, idle states, DDR performance monitor, etc. - Small and random clean-ups and device node additions. * tag 'imx-dt64-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits) arm64: dts: imx8mq: Pass address-cells/size-cells to mipi_dsi arm64: dts: imx8mq: Use 'dsi' as node name arm64: dts: imx8mp-venice-gw702x: fix GSC vdd_bat data size arm64: dts: imx8mq-tqma8mq-mba8mx: Remove invalid properties arm64: dts: imx8mq: Add missing pci property arm64: dts: imx8mq: Fix lcdif clocks arm64: dts: imx8mq: Fix lcdif compatible arm64: dts: imx8mp: don't initialize audio clocks from CCM node arm64: dts: imx8mm-venice: Fix GSC vdd_bat data size. arm64: dts: imx8mp: Add coresight trace components arm64: dts: imx93: add ddr performance monitor node arm64: dts: imx8mm-phg: Add display support arm64: dts: tqma8mqml: Add vcc supply to i2c eeproms arm64: dts: imx8mm-evk: Add HDMI support arm64: dts: imx8mn-var-som-symphony: adapt FEC pinctrl for SOMs with onboard PHY arm64: dts: imx8mn-var-som: add 20ms delay to ethernet regulator enable arm64: dts: imx8mp-msc-sm2s: Add sound card arm64: dts: imx8mn-beacon: Migrate sound card to simple-audio-card arm64: dts: imx8mp-beacon-kit: Enable WM8962 Audio CODEC arm64: dts: imx93: add fsl,stop-mode property to support WOL ... Link: https://lore.kernel.org/r/20230610072530.418847-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
52d38cff94 |
- fix DCLK clock names
- new board ICnova A20 ADB4006 - add D1 SPI node - add bluetooth node for chip board - add extra mmc2 pinmux to sun5i - add axp209 iio-hwmon node -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSPRixG1tysKC2PKM10Ba7+DO8kkwUCZIOTTQAKCRB0Ba7+DO8k k5xnAQC7SiKb7nM57GcvalNzvMRhpo0z0gpGvWRQS72kpIHbjgEA03DMyS88cksb RJj1gooMbGyrINBRQF2JmCSxDVG7fw4= =Ads4 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSDcsACgkQYKtH/8kJ UidblRAAqA3rpCvxHhIFfPnANEDpPPXP8Op6XMip5usfns123mD+DqwEdPrTBkEt +20ikAcqPsYMxHz02LPLVX66n0QHscwNHlXzCrJpsidLAr5m3EmC0PqTYFPwixEI ow0MjL4JukBUnVn+p0c5K0dx56Pb+29RBsqsVR7jNM0DFVsm1CbrtfRZbGcHwNFe sKou+Qa+JawQa7w8T092T6ke9tDCHA666j9wJGiw7xnNVaFiBSWGhGO97VpDQ3nV z8cCfyugFQ34+Tbmtyzj20lAxp6dvqMG2E67E/2gpYxHSDLIiwaVwP5QaafaCjgm ZhgXlfHn8HCoC+JUv0X02Fp13OZrWR4XWIi1bL1QcenlaAknZ9HwiOm8F3xJJaGE 2WBkuHs7l7x4WkWacUXir4CRU+lkSKvbHQpz38aZhI/GT97fFkzsGbJ65VGBRzdA 68GGwbQxs/Z4Hj5Drea4f2CbY4wLHMuaJQErYncMtnbIPcQDGGiaLFRMrrLn7UFZ r/5wdtvyW8mWTcFkhCq63b+IutI5NBgpPNdSZc/YflPOSWenchtAaSy6OkQVEYax dpm9YFV5Vu/KY8HrEi2UQadEzxu6o+V4rN/BSF0UVRk267NDz1xbtLuSE7NiyCFD PcR2/yPLpMQeRma5F4eeeXSOtfUxxNnYJ/cClhHs891F6NpXxdo= =76YI -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - fix DCLK clock names - new board ICnova A20 ADB4006 - add D1 SPI node - add bluetooth node for chip board - add extra mmc2 pinmux to sun5i - add axp209 iio-hwmon node * tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: axp209: Add iio-hwmon node for internal temperature ARM: dts: sun5i: Add port E pinmux settings for mmc2 ARM: dts: sun5i: chip: Enable bluetooth riscv: dts: allwinner: d1: Add SPI controllers node arm: dts: sunxi: Add ICnova A20 ADB4006 board dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding ARM: dts: sunxi: rename tcon's clock output Link: https://lore.kernel.org/r/20230609210452.GA17638@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
a9c7f8d0cf |
arm64: tegra: Device tree changes for v6.5-rc1
This introduces support for the IGX Orin and Jetson Orin Nano devices and enables various additional features on the Jetson AGX Orin and Jetson Orin NX. This also enables some basic thermal support to prevent the devices from overheating. Support for the GPU on the Google Pixel C is enabled and various minor issues are fixed and cleaned up. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmSDSOsTHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zobIYEACmgNyMW0vHcRRQcLo9RTqfOB0Pncy3 BmZBU4MeebkxFsVFDMfWUyHrkptBporGkUyAWJw2RBORvrCbLj1OhW1y8V0GRl4s SIke/oC1834PKk5a6jmaauOYfFiHCyXzrwGnWFIYzIX+7Xn9tDsXjcJQWn1ngmJr xrKxp/Mp/3dsgZDaJEPhHAn9rWuGDrBMLhVK0uTAjh9Rx7cy7KE3qMVzBzp2R3Mg VK8vay6F2pJ3LkdozNX/Q56j77mfX7GFRPITulWblRLVRstW7g0qwrZd/jcQS74h 2wpbJ5FdS/0pX9LBN2tgUuDtGxwXHvUl0/D4P7QyuOLpmK9CMt+mM8N7JwjErJn1 A7A6BF6F18r+pQaqzfUaZcayrVqfwgDrFgIOOBNpvcvsCc1W6vnf0LSQOkCORY+K YNnCZvA81R4j0MuC8Q4j9hsdp2K0Ykdk32usAnSAM4E/pZhlwPcAFJm+EZ6Swd2Z eshCHVPXbIr3GJsUGhzm3bscjpD5sad500eWQrBGWRSioBEwCF+I+IXd5+v/7Xc+ vp3NUyj4bJCCmV5OmnuaAZQMVpC3x7pXaQHCakZ9gLbGoUhf9qcS+lFWPM82tYXA kLn42PS9YjLCyigKdGYBiwXv3t2qQ7pm3U5WnMUY9vx6snPCa7MKIiTBQ3H9b0z3 9tYmXmZBus1+Gg== =HPjl -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSDWcACgkQYKtH/8kJ UicmYg//bu3NoTNoQrez14Q0giWmFwRAT4YOXGUVGDY8Uac+lcc077x5Z/y3b6Ho vmczi94COl6c14WA0wSHbl+lINAV8LkQimJPMm7kpsYObGCHfwEM3k33fz5aJW8Q 0e1MI0r5e/9pcFpuw58sqNjNnRN1aJLgVfJshSUUtA1QrcOlT1E1dm7kzpi66Rvz A61l8YLWMdwvfDxLz/jWi8r9LxcPtWchLPTiNw11CwLUvWspRQXTfERwpkFbLiu1 tBFAg6vfMWTqt08e3VhW+SeVwUq0eVuOUvS0oUI+rvIfDL1c9xUAVN+PstC8XlbB 3kv6RoB/e3OqeRKsxEzozgz/biV201wbGmkqLo2WtUN1a8PdqKbeMSRv3yvDhU5e dxeCFsMk9lPw2R0QjDPYIB6P9EEWHKwhj7n+NIKtNTd+aE91eD1QlrHsC8ZLUIuA 6cJxAhwwdjXHGt6o7eT6nHMrJw1uBVqXc9zgAdDHCWtTc3kAUmD10dhrxV8EK6Ia f7UVonOQh6Y1OXeEN5iRXPOCaCF6XdNU/B/VB3FhE+tiWy6lm04seTz1s19vnNtk DIIE4oOfl5jef+pZM97ARCRZzmqG3Tu7W7GHalQFfj0oaQ5MVusmYVuoIznydbe9 ul+W8LyRXRWa0isZDaSQCAp1pPHMSnhDaa6HfK1Tnsx2G9XCDOo= =jIxj -----END PGP SIGNATURE----- Merge tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt arm64: tegra: Device tree changes for v6.5-rc1 This introduces support for the IGX Orin and Jetson Orin Nano devices and enables various additional features on the Jetson AGX Orin and Jetson Orin NX. This also enables some basic thermal support to prevent the devices from overheating. Support for the GPU on the Google Pixel C is enabled and various minor issues are fixed and cleaned up. * tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Enable thermal support on Jetson Orin Nano arm64: tegra: Enable thermal support on Jetson Orin NX arm64: tegra: Enable thermal support on Jetson AGX Orin arm64: tegra: Add Tegra234 thermal support arm64: tegra: Add a few blank lines for better readability arm64: tegra: Sort properties more logically arm64: tegra: Enable GPU on Smaug arm64: tegra: Add GPU power rail regulator on Smaug arm64: tegra: Update USB phy-name for Jetson Orin NX arm64: tegra: Enable USB device for Jetson AGX Orin arm64: tegra: Add Tegra234 pin controllers arm64: tegra: Support Jetson Orin Nano Developer Kit arm64: tegra: Add missing cache properties on Tegra210 arm64: tegra: Fix PCIe regulator for Orin Jetson AGX arm64: tegra: Add CPU OPP tables and interconnects property arm64: tegra: Add support for IGX Orin Link: https://lore.kernel.org/r/20230609193620.2275240-6-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
868a11b602 |
STM32 STM32MP25 for v6.5, round 1
Highlights:
----------
STM32MP25 family is composed of 4 SoCs defined as following:
-STM32MP251: common part composed of 1*Cortex-A35,
common peripherals like SDMMC, UART, SPI, I2C, PCIe, USB3,
parallel and DSI display, 1*ETH ...
-STM32MP253: STM32MP251 + 1*Cortex-A35 (dual CPU), a second ETH,
CAN-FD and LVDS display.
-STM32MP255: STM32MP253 + GPU/AI and video encode/decode.
-STM32MP257: STM32MP255 + ETH TSN switch (2+1 ports).
A second diversity layer exists for security features/A35 frequency:
-STM32MP25xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
This PR adds the STM32MP257F EV1 board support. This board embeds a
STM32MP257FAI SoC, with 4GB of DDR4, TSN switch (2+1 ports),
2*USB typeA, 1*USB2 typeC, SNOR OctoSPI, mini PCIe, STPMIC2 for power distribution ...
-----BEGIN PGP SIGNATURE-----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=WkNC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fxHg
-----END PGP SIGNATURE-----
Merge tag 'stm32-mp25-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/newsoc
STM32 STM32MP25 for v6.5, round 1
Highlights:
----------
STM32MP25 family is composed of 4 SoCs defined as following:
-STM32MP251: common part composed of 1*Cortex-A35,
common peripherals like SDMMC, UART, SPI, I2C, PCIe, USB3,
parallel and DSI display, 1*ETH ...
-STM32MP253: STM32MP251 + 1*Cortex-A35 (dual CPU), a second ETH,
CAN-FD and LVDS display.
-STM32MP255: STM32MP253 + GPU/AI and video encode/decode.
-STM32MP257: STM32MP255 + ETH TSN switch (2+1 ports).
A second diversity layer exists for security features/A35 frequency:
-STM32MP25xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
This PR adds the STM32MP257F EV1 board support. This board embeds a
STM32MP257FAI SoC, with 4GB of DDR4, TSN switch (2+1 ports),
2*USB typeA, 1*USB2 typeC, SNOR OctoSPI, mini PCIe, STPMIC2 for power distribution ...
* tag 'stm32-mp25-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (44 commits)
MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE
arm64: defconfig: enable ARCH_STM32 and STM32 serial driver
arm64: dts: st: add stm32mp257f-ev1 board support
dt-bindings: stm32: document stm32mp257f-ev1 board
arm64: dts: st: introduce stm32mp25 pinctrl files
arm64: dts: st: introduce stm32mp25 SoCs family
arm64: introduce STM32 family on Armv8 architecture
dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon
pinctrl: stm32: add stm32mp257 pinctrl support
dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages
ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx
ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1
ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc
ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon
ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1
ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards
ARM: dts: stm32: add vrefint support to adc2 on stm32mp15
...
Link: https://lore.kernel.org/r/080fc303-45c1-6cc0-4c5e-694e730896a6@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
5b017b5ed2 |
Fixes for the reset pin on nanopi r5c, a reset line on SOQuartz, a duplicate
usb regulator on rock64 and PCIe register mappings on rk356x. Also some missing cache properties. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmSGMjEQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgRk5B/9MPp9bNf3FbeQt79BR5LmhbpOYiZ8LjW3S z98q/3kiAmiPHQBUT7pTFb5UnkQU2QUFpDcKnhAE8UjjwX6rFDNCoODXLdQdVuBJ Te2reylijOFUTBC7QEaseeDndz+OjlRhe060BXhvEt9cBfnT+zSNhgmrRGvXes0g akVVthqWX2CB6WI4M36yBquvTl6846WqGqOcYq2nA8tBA18JfT8Lbu1MAyRcZlpP 0AaVwJNCLA6dgYB3wYN6CMTkr34nUB70xyHQeIpDYXTqNJ+e50DN9uOeeN2MSbtI ILY4ox1HDcx81+K/X3n5jzotswRPO5Nws8j1GAgL/6227FUX/wKg =Eskg -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSMz/wACgkQYKtH/8kJ UidUnhAAhgqCc8sMxxL14NegMSJ/5gp+52lPbfAcinjEj37IyYkz5dj7XlmVXWry /rGSe6AZI++R/rXaeVCH796mOKN+01TGK6VGi95jlsbwpWUOOcZOuWJ+34QD6Fad oX0/C2YPokVyEBp3fJ49MRVjNGLBTIswMGB4ofM0Yl+2Lu/K49PUE2KOPeJcjCKM i8PkHRyBKXgDQeJxVC0QZaQKbKmAEnPC7W1tn9Mex6kxZuOFyaGoSnG4UwyXSg2c KL1qWveMzNase2Udg6xUI+Ij6R0cQmFuoSDNZIm2ejCUjXcMTGngJvSVZpRliVzS NFb0QyQfTRWEsHS7HQdOcn2NsYF3xOx5IM2xI8tOGe8LjSSojd0oI+9euySnp3tj 8El0DostRb/8xiQYmILBgFum8BHGNsxKhckI25VvpqUB8VbIxgF1J0lQdUJsJYxa m85NXxt+XCnOH8NLuh6zquf6ec2DVIgn88gYTxTC53ymqC9iwmWbCDwY3/gjDc1F 5gO4szKHrVFmmpBmSl4Vv0TC0GEa1a3GW2PCHcgCKOiHrDKfBAnzu4jmKz6vnglt mULMisavEpEcdGxM9A4STXzE1EFmikmoel4IFHftPEie5FM8bQjMjGLS/UmysKrJ e5jWhox6Th4M47dr0nKrwG5eU6DHB/h3HA9UKUBKkYHIvt2cDaM= =qYzP -----END PGP SIGNATURE----- Merge tag 'v6.4-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Fixes for the reset pin on nanopi r5c, a reset line on SOQuartz, a duplicate usb regulator on rock64 and PCIe register mappings on rk356x. Also some missing cache properties. * tag 'v6.4-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix rk356x PCIe register and range mappings arm64: dts: rockchip: fix button reset pin for nanopi r5c arm64: dts: rockchip: fix nEXTRST on SOQuartz arm64: dts: rockchip: add missing cache properties arm64: dts: rockchip: fix USB regulator on ROCK64 Link: https://lore.kernel.org/r/2885657.e9J7NaK4W3@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ben Schneider
|
0ee03b8c85 |
arm64: dts: marvell: Fix espressobin-ultra boot failure and wifi
Boot hangs on EspressoBIN Ultra (Armada 3720) after a message that device vcc_sd1 had been disabled. The device manufacturer patched this issue in their kernel fork noting that vcc_sd1 is used by the EspressoBIN model but not the EspressoBIN Ultra. Removing the device from the tree fixes the boot hang and wifi. Signed-off-by: Ben Schneider <ben@bens.haus> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> |
||
|
Geert Uytterhoeven
|
fe96d8b2a5 |
arm64: dts: marvell: Fix pca954x i2c-mux node names
"make dtbs_check":
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
||
|
Vadym Kochan
|
b29381e91e |
arm64: dts: marvell: cp11x: Fix nand_controller node name according to YAML
Marvell NAND controller has now YAML to validate it's DT bindings, so change the node name of cp11x DTSI as it is required by nand-controller.yaml Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> |
||
|
Bjorn Andersson
|
c2951581e6 |
Revert "arm64: dts: adapt to LP855X bindings changes"
commit 'ebdcfc8c42c2 ("arm64: dts: adapt to LP855X bindings changes")'
is a Tegra change, but was accidentally merged in the Qualcomm tree. The
change is reverted to avoid rebasing a large number of other changes.
This reverts commit
|
||
|
Tony Lindgren
|
a495681151 |
arm64: dts: ti: Unify pin group node names for make dtbs checks
Prepare for pinctrl-single yaml binding and unify pin group node names. Let's standardize on pin group node naming ending in -pins. As we don't necessarily have a SoC specific compatible property for pinctrl-single. I'd rather not add a pattern match for pins somewhere in the name for all the users. Trying to add matches for pins-default will be futile as on the earlier SoCs we've already seen names like pins-sleep, pins-idle, pins-off and so on that would need to be matched. And as the node is a pin group, let's prefer to use naming -pins rather than -pin as more pins may need to be added to the pin group later on. Signed-off-by: Tony Lindgren <tony@atomide.com> [vigneshr@ti.com: Rebase onto latest ti/next and extend to new nodes] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Francesco Dolcini
|
7f066473e4 |
arm64: dts: ti: add verdin am62 yavia
Add Toradex Verdin AM62 Yavia. Link: https://www.toradex.com/products/carrier-board/yavia Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230615095058.33890-6-francesco@dolcini.it Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Francesco Dolcini
|
50e3424fbb |
arm64: dts: ti: add verdin am62 dahlia
Add Toradex Verdin AM62 Dahlia. Link: https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230615095058.33890-5-francesco@dolcini.it Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Francesco Dolcini
|
316b80246b |
arm64: dts: ti: add verdin am62
This patch adds the device tree to support Toradex Verdin AM62 a computer on module which can be used on different carrier boards and the Toradex Verdin Development Board carrier board. The module consists of an TI AM62 family SoC (either AM623 or AM625), a TPS65219 PMIC, a Gigabit Ethernet PHY, 512MB to 2GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC, an I2C EEPROM, an RX8130 RTC, and optional Parallel RGB to MIPI DSI bridge plus an optional Bluetooth/Wi-Fi module. Anything that is not self-contained on the module is disabled by default. So far there is no display nor USB role switch supported, apart of that all the other functionalities are fine. Link: https://developer.toradex.com/hardware/verdin-som-family/modules/verdin-am62/ Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kit Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230615095058.33890-4-francesco@dolcini.it Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Wadim Egorov
|
3443c1c4ed |
arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625
The phyCORE-AM62x [1] is a SoM (System on Module) featuring TI's AM62x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM62x family. A development Kit, called phyBOARD-Lyra [2] is used as a carrier board reference design around the AM62x SoM. Supported features: * Debug UART * SPI NOR Flash * eMMC * 2x Ethernet * Micro SD card * I2C EEPROM * I2C RTC * GPIO Expander * LEDs * USB For more details, see: [1] Product page SoM: https://www.phytec.com/product/phycore-am62x [2] Product page CB: https://www.phytec.com/product/phyboard-am62x Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230504140143.1425951-2-w.egorov@phytec.de Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Daniel Golle
|
3bfbff9b46 |
arm64: dts: mt7986: increase bl2 partition on NAND of Bananapi R3
The bootrom burned into the MT7986 SoC will try multiple locations on
the SPI-NAND flash to load bl2 in case the bl2 image located at the the
previously attempted offset is corrupt.
Use 0x100000 instead of 0x80000 as partition size for bl2 on SPI-NAND,
allowing for up to four redundant copies of bl2 (typically sized a
bit less than 0x40000).
Fixes:
|
||
|
Chen-Yu Tsai
|
f38ea593ad |
arm64: dts: mediatek: mt8186: Wire up GPU voltage/frequency scaling
Add the GPU's OPP table. This is from the downstream ChromeOS kernel, adapted to the new upstream opp-supported-hw binning format. Also add dynamic-power-coefficient for the GPU. Also add label for mfg1 power domain. This is to be used at the board level to add a regulator supply for the power domain. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230609072906.2784594-5-wenst@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Chen-Yu Tsai
|
263d2fd02a |
arm64: dts: mediatek: mt8186: Add GPU speed bin NVMEM cells
On the MT8186, the chip is binned for different GPU voltages at the highest OPPs. The binning value is stored in the efuse. Add the NVMEM cell, and tie it to the GPU. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230609072906.2784594-4-wenst@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Chen-Yu Tsai
|
8f4ed8fc51 |
arm64: dts: mediatek: mt8186: Wire up CPU frequency/voltage scaling
This adds clocks, dynamic power coefficients, and OPP tables for the CPU cores, so that everything required at the SoC level for CPU freqency and voltage scaling is available. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230609072906.2784594-3-wenst@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Chen-Yu Tsai
|
32dfbc03fc |
arm64: dts: mediatek: mt8186: Add CCI node and CCI OPP table
Add a device node for the CCI (cache coherent interconnect) and an OPP table for it. The OPP table was taken from the downstream ChromeOS kernel. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230609072906.2784594-2-wenst@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Daniel Golle
|
c26f779a22 |
arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts
Add pwm-fan and cooling-maps to BananaPi-R3 devicetree. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230530201235.22330-5-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Daniel Golle
|
1f5be05132 |
arm64: dts: mt7986: add thermal-zones
Add thermal-zones to mt7986 devicetree. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230530201235.22330-4-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Daniel Golle
|
0a9615d58d |
arm64: dts: mt7986: add thermal and efuse
Add thermal related nodes to mt7986 devicetree. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230530201235.22330-3-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Nícolas F. R. A. Prado
|
a4366b5695 |
arm64: dts: mediatek: mt8192: Fix CPUs capacity-dmips-mhz
The capacity-dmips-mhz parameter was miscalculated: this SoC runs
the first (Cortex-A55) cluster at a maximum of 2000MHz and the
second (Cortex-A76) cluster at a maximum of 2200MHz.
In order to calculate the right capacity-dmips-mhz, the following
test was performed:
1. CPUFREQ governor was set to 'performance' on both clusters
2. Ran dhrystone with 500000000 iterations for 10 times on each cluster
3. Calculated the mean result for each cluster
4. Calculated DMIPS/MHz: dmips_mhz = dmips_per_second / cpu_mhz
5. Scaled results to 1024:
result_c0 = dmips_mhz_c0 / dmips_mhz_c1 * 1024
The mean results for this SoC are:
Cluster 0 (LITTLE): 12016411 Dhry/s
Cluster 1 (BIG): 31702034 Dhry/s
The calculated scaled results are:
Cluster 0: 426.953226899238 (rounded to 427)
Cluster 1: 1024
Fixes:
|
||
|
Nícolas F. R. A. Prado
|
6970cadb21 |
arm64: dts: mediatek: mt8192: Add missing dma-ranges to soc node
In the series "Adjust the dma-ranges for MTK IOMMU", the mtk-iommu driver was adapted to separate the iova range based on the larb used, and a dma-ranges property was added to the soc node in the devicetree of the affected SoCs allowing the whole 16GB iova range to be used. Except that for mt8192, there was no patch adding dma-ranges. Add the missing dma-ranges property to the soc node like was done for mt8195 and mt8186. This fixes the usage of the vcodec, which would otherwise trigger iommu faults. Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230601203221.3675915-1-nfraprado@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Hsin-Yi Wang
|
127e33f91e |
arm64: dts: mediatek: mt8183: kukui: Add scp firmware-name
The upstream SCP firmware path is /lib/firmware/mediatek/mt8183/scp.img Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230220093343.3447381-1-hsinyi@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Yunfei Dong
|
64bceed383 |
arm64: dts: mt8195: Add video decoder node
Add video decoder node to mt8195 device tree. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20230303013842.23259-7-allen-kh.cheng@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |