All work currently pending will be done first by calling
destroy_workqueue(). There is no need to flush it explicitly.
Link: https://lore.kernel.org/r/20220424062413.3220315-1-ran.jianping@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For session recovery, driver relies on the dpc thread to initiate certain
operations. The dpc thread runs exclusively without the Mailbox interface
being occupied. A recent code change for heartbeat check via mailbox cmd 0
is preventing the dpc thread from carrying out its operation. This patch
allows the higher priority error recovery to run first before running the
lower priority heartbeat check.
Link: https://lore.kernel.org/r/20220310092604.22950-9-njavali@marvell.com
Fixes: d94d8158e1 ("scsi: qla2xxx: Add heartbeat check")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During purex packet handling the driver was incorrectly freeing a
pre-allocated structure. Fix this by skipping that entry.
System crashed with the following stack during a module unload test.
Call Trace:
sbitmap_init_node+0x7f/0x1e0
sbitmap_queue_init_node+0x24/0x150
blk_mq_init_bitmaps+0x3d/0xa0
blk_mq_init_tags+0x68/0x90
blk_mq_alloc_map_and_rqs+0x44/0x120
blk_mq_alloc_set_map_and_rqs+0x63/0x150
blk_mq_alloc_tag_set+0x11b/0x230
scsi_add_host_with_dma.cold+0x3f/0x245
qla2x00_probe_one+0xd5a/0x1b80 [qla2xxx]
Call Trace with slub_debug and debug kernel:
kasan_report_invalid_free+0x50/0x80
__kasan_slab_free+0x137/0x150
slab_free_freelist_hook+0xc6/0x190
kfree+0xe8/0x2e0
qla2x00_free_device+0x3bb/0x5d0 [qla2xxx]
qla2x00_remove_one+0x668/0xcf0 [qla2xxx]
Link: https://lore.kernel.org/r/20220310092604.22950-6-njavali@marvell.com
Fixes: 62e9dd1777 ("scsi: qla2xxx: Change in PUREX to handle FPIN ELS requests")
Cc: stable@vger.kernel.org
Reported-by: Marco Patalano <mpatalan@redhat.com>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of using the SCp.ptr field to track whether or not a command is
in flight, use the sp->type field to track this information. sp->type
must be set for proper operation of the qla2xxx driver. See e.g. the
switch (sp->type) statement in qla2x00_ct_entry().
This patch prepares for removal of the SCSI pointer from struct scsi_cmnd.
Link: https://lore.kernel.org/r/20220218195117.25689-43-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The qla_sess_op_cmd_list was introduced in commit 8b2f5ff3d0 ("qla2xxx:
cleanup cmd in qla workqueue before processing TMR"). Then the usage of
this list was dropped in commit fb35265b12 ("scsi: qla2xxx: Remove
session creation redundant code").
Thus, remove this list since it is no longer used.
Link: https://lore.kernel.org/r/AS8PR10MB49524AAB4C8016E4AFF17FFB9D2D9@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is an update to the original 28xx adapter enablement. Add a bunch of
conditionals that are applicable for 28xx.
Link: https://lore.kernel.org/r/20220110050218.3958-16-njavali@marvell.com
Fixes: ecc89f25e2 ("scsi: qla2xxx: Add Device ID for ISP28XX")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A device logout in loop topology initiates a device connection teardown
which loses the FW device handle. In loop topo, the device handle is not
regrabbed leading to device login failures and eventually to loss of the
device. Fix this by taking the main login path that does it.
Link: https://lore.kernel.org/r/20220110050218.3958-11-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add ql2xnvme_queues module parameter to configure number of NVMe queues
Usage:
Number of NVMe Queues that can be configured.
Final value will be min(ql2xnvme_queues, num_cpus, num_chip_queues),
1 - Minimum number of queues supported
8 - Default value
128 - Maximum number of queues supported
Link: https://lore.kernel.org/r/20220110050218.3958-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The timeout handler and the done function are racing. When
qla2x00_async_iocb_timeout() starts to run it can be preempted by the
normal response path (via the firmware?). qla24xx_async_gpsc_sp_done()
releases the SRB unconditionally. When scheduling back to
qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed
sp->qpair pointer:
qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21.
qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21
qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400.
qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5
BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx]
Obvious solution to this is to introduce a reference counter. One reference
is taken for the normal code path (the 'good' case) and one for the timeout
path. As we always race between the normal good case and the timeout/abort
handler we need to serialize it. Also we cannot assume any order between
the handlers. Since this is slow path we can use proper synchronization via
locks.
When we are able to cancel a timer (del_timer returns 1) we know there
can't be any error handling in progress because the timeout handler hasn't
expired yet, thus we can safely decrement the refcounter by one.
If we are not able to cancel the timer, we know an abort handler is
running. We have to make sure we call sp->done() in the abort handlers
before calling kref_put().
Link: https://lore.kernel.org/r/20220110050218.3958-3-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The partial UFS revert in 5.15 is needed for some additional fixes in
the 5.16 SCSI tree. Merge the fixes branch.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, firmware limits ELS payload to FC frame size/2112. This patch
adjusts memory buffer size to be able to handle max ELS payload.
Link: https://lore.kernel.org/r/20211026115412.27691-11-njavali@marvell.com
Fixes: 84318a9f01 ("scsi: qla2xxx: edif: Add send, receive, and accept for auth_els")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch is per review comment by Hannes Reinecke from previous
submission to replace list_for_each_safe with list_for_each_entry_safe.
Link: https://lore.kernel.org/r/20211026115412.27691-8-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When user uses issue_lip to do link bounce, driver sends additional target
reset to remote device before resetting the link. The target reset would
affect other paths with active I/Os. This patch will remove the unnecessary
target reset.
Link: https://lore.kernel.org/r/20211026115412.27691-4-njavali@marvell.com
Fixes: 5854771e31 ("[SCSI] qla2xxx: Add ISPFX00 specific bus reset routine")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver probing function should return < 0 for failure, otherwise
kernel will treat value > 0 as success.
Link: https://lore.kernel.org/r/1634522181-31166-1-git-send-email-zheyuma97@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Additionally, remove qla_insert_tgt_attrs() and replace it with
qla_host_attr_is_visible().
Link: https://lore.kernel.org/r/20211012233558.4066756-41-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
DPC thread gets restricted due to a no-op mailbox, which is a blocking call
and has a high execution frequency. To free up the DPC thread we move no-op
handling to the workqueue. Also, modified qla_do_heartbeat() to send no-op
MBC if we don’t have any active interrupts, but there are still I/Os
outstanding with firmware.
Link: https://lore.kernel.org/r/20210908164622.19240-9-njavali@marvell.com
Fixes: d94d8158e1 ("scsi: qla2xxx: Add heartbeat check")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Device reset and target reset will be using different calling sequences, so
open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_device_reset(), and
remove the now obsolete function __qla2xxx_eh_generic_reset(). No
functional changes.
Link: https://lore.kernel.org/r/20210819091913.94436-4-hare@suse.de
Cc: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Device reset and target reset will be using different calling sequences, so
open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_target_reset(). No
functional changes.
Link: https://lore.kernel.org/r/20210819091913.94436-3-hare@suse.de
Cc: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When calling bus reset the driver will be doing a full SAN resync, so there
is no need to wait for any pending RSCNs; they'll be re-issued during
resync anyway.
Link: https://lore.kernel.org/r/20210819091913.94436-2-hare@suse.de
Cc: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For target port that register itself as both FCP + NVMe, initiator driver
will try to login one mode at a time. If the last mode did not succeed,
then driver will try the other mode.
When error is encountered, current code only flip to other mode one time
(NVMe->FCP) and remain on the last mode. Driver wrongly assumed target
port does not support PRLI NVMe, instead it was not ready to receive PRLI.
This patch will alternate back and forth on every PRLI failure until login
retry count has depleted or it is succeeded.
Link: https://lore.kernel.org/r/20210817051315.2477-10-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For EDIF + N2N to work, firmware 9.8 or later is required. The driver will
pause after PLOGI to allow app to authenticate. Once authentication
completes, app will tell driver to do PRLI.
Link: https://lore.kernel.org/r/20210817051315.2477-6-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reject inflight AUTH ELS if driver is going through session recovery.
Link: https://lore.kernel.org/r/20210817051315.2477-3-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avoid allocating firmware dump and only allocate a single queue for a kexec
kernel.
Link: https://lore.kernel.org/r/20210810043720.1137-12-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To be consistent with other OS drivers, register OS name and version in
FDMI-1 fabric registration.
Link: https://lore.kernel.org/r/20210810043720.1137-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-39-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
After the completion of PLOGI, both sides have authenticated and PRLI
completed, encrypted I/Os are allowed to proceed.
- Use new firmware API to encrypt traffic on the wire
- Add driver parameter to enable|disable EDIF feature
# modprobe qla2xxx ql2xsecenable=1
Link: https://lore.kernel.org/r/20210624052606.21613-10-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
During runtime, driver and authentication application need to stay in sync
in terms of: Session being down|up, arrival of new authentication
message (AUTH ELS) and SADB update completion.
These events are queued up as doorbell to the authentication
application. Application would read this doorbell on regular basis to stay
up to date. Each SCSI host would have a separate doorbell queue.
The doorbell interface can daisy chain a list of events for each read. Each
event contains an event code + hint to help application steer the next
course of action.
Link: https://lore.kernel.org/r/20210624052606.21613-9-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
There is no FC switch scan service that can indicate whether a device is
secure or non-secure.
In order to detect whether the remote port supports encrypted operation,
driver must first do a PLOGI with the remote device. On completion of the
PLOGI, driver will query firmware to see if the device supports secure
login. To do that, driver + firmware must advertise the security bit via
PLOGI's service parameter. The remote device shall respond using the same
service parameter whether it supports it or not.
Link: https://lore.kernel.org/r/20210624052606.21613-8-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
As part of the authentication process, the authentication application will
generate a SADB entry (Security Association/SA, key, SPI value, etc). This
SADB is then passed to driver to be programmed into hardware. There will be
a pair of SADB's (Tx and Rx) for each connection.
After some period, the application can choose to change the key. At that
time, a new set of SADB pair is given to driver. The old set of SADB will
be deleted.
Add a new bsg call (QL_VND_SC_SA_UPDATE) to allow application to allow
adding or deleting SADB entries. Driver will not keep the key in
memory. It will pass it to HW.
It is assumed that application will assign a unique SPI value to this SADB
(SA + key). Driver + hardware will assign a handle to track this unique
SPI/SADB.
Link: https://lore.kernel.org/r/20210624052606.21613-6-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
Once authentication messages sent from a remote device have arrived, each
message is extracted and placed in a buffer for application to retrieve.
The FC frame header will be stripped, leaving behind the AUTH ELS payload.
It is up to the application to strip the AUTH ELS header to get to the
actual authentication message.
Link: https://lore.kernel.org/r/20210624052606.21613-5-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
Add the ability for authentication application to send and retrieve
messages as part of the authentication process via existing
FC_BSG_HST_ELS_NOLOGIN BSG interface.
To send a message, application is expected to format the data in the AUTH
ELS format. Refer to FC-SP2 for details.
If a message was received, application is required to reply with either a
LS_ACC or LS_RJT complete the exchange using the same interface. Otherwise,
remote device will treat it as a timeout.
Link: https://lore.kernel.org/r/20210624052606.21613-4-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use "no-op" mailbox command to check if the adapter firmware is still
responsive.
Link: https://lore.kernel.org/r/20210619052427.6440-1-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Eliminate the following coccicheck warning:
drivers/scsi/qla2xxx/qla_os.c:4622:2-7:
WARNING: NULL check before some freeing functions is not needed.
drivers/scsi/qla2xxx/qla_os.c:4637:3-8:
WARNING: NULL check before some freeing functions is not needed.
Link: https://lore.kernel.org/r/20210409120925.7122-1-linqiheng@huawei.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Consolidate zio threshold setting for both FCP & NVMe to prevent one
protocol from clobbering the setting of the other protocol.
Link: https://lore.kernel.org/r/20210329085229.4367-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use dma_pool_zalloc() instead of dma_pool_alloc() and memset().
Link: https://lore.kernel.org/r/1615603275-14303-1-git-send-email-wangqing@vivo.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UFS core has received a substantial rework this cycle. This in
turn has caused a merge conflict in linux-next. Merge 5.11/scsi-fixes
into 5.12/scsi-queue and resolve the conflict.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
fc_remote_port_chkready() returns a SCSI result value, not the port
status. Fix the value returned when the remote port isn't set.
Link: https://lore.kernel.org/r/20210113090500.129644-34-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
