Add the vendor commands that must be used by the network manager
to allow proper operation of iwlmei.
* Send information on the AP CSME is connected to
* Notify the userspace when roaming is forbidden
* Allow the userspace to require ownership
Co-Developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
v6: remove the VENDOR_CMDS Kconfig option and make the whole infra
depend on IWLMEI directly
v7: remove // comments
remove an unneeded function
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112062814.7502-5-emmanuel.grumbach@intel.com
iwlmei needs to know about the follwing events:
* Association
* De-association
* Country Code change
* SW Rfkill change
* SAR table changes
iwlmei can take the device away from us, so report the new
rfkill type when this happens.
Advertise the required data from the CSME firmware to the
usersapce: mostly, the AP that the CSME firmware is currently
associated to in case there is an active link protection
session.
Generate the HOST_ASSOC / HOST_DISSASSOC messages.
Don't support WPA1 (non-RSNA) for now.
Don't support shared wep either.
We can then determine the AUTH parameter by checking the AKM.
Feed the cipher from the key installation.
SW Rfkill will be implemented later when cfg80211 will
allow us to read the SW Rfkill state.
Co-Developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
v7: Ayala added her signed-off
remove pointless function declaration
fix a bug due to merge conflict in the HOST_ASSOC message
v8: leave a print if we have a SAP connection on a device we do
not support (yet)
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112062814.7502-4-emmanuel.grumbach@intel.com
Add three debugfs hooks:
* status: Check if we have a connection with the CSME
firwmare. This hook is a read only.
* req_ownership: Send a SAP command to request ownership. This
flow should be triggered by iwlwifi (from user space through
vendor commands really), but being able to trigger an ownership
request from debugfs allows us to request ownership without
connecting afterwards. This is an "error" flow that the CSME
firmware is designed to handle this way:
+ Grant ownership since the host asked for it
+ Wait 3 seconds to let the host connect
+ If the host didn't connect, take the device back (forcefully).
+ Don't grant any new ownership request in the following 30
seconds.
This debugfs hook allows us to test this flow.
* send_start_message: Restart the communication with the CSME
firmware from the very beginning. At the very beginning (upon
iwlwifi start), iwlmei send a special message: SAP_ME_MSG_START.
This hook allows to send it again and this will retrigger the
whole flow. It is important to test this restart in the middle
of normal operation since it can happen (in case the CSME
firmware decided to reset for example).
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112062814.7502-3-emmanuel.grumbach@intel.com
CSME in two words
-----------------
CSME stands for Converged Security and Management Engine. It is
a CPU on the chipset and runs a dedicated firmware.
AMT (Active Management Technology) is one of the applications
that run on that CPU. AMT allows to control the platform remotely.
Here is a partial list of the use cases:
* View the screen of the plaform, with keyboard and mouse (KVM)
* Attach a remote IDE device
* Have a serial console to the device
* Query the state of the platform
* Reset / shut down / boot the platform
Networking in CSME
------------------
For those uses cases, CSME's firmware has an embedded network
stack and is able to use the network devices of the system: LAN
and WLAN. This is thanks to the CSME's firmware WLAN driver.
One can add a profile (SSID / key / certificate) to the CSME's OS
and CSME will connect to that profile. Then, one can use the WLAN
link to access the applications that run on CSME (AMT is one of
them). Note that CSME is active during power state and power state
transitions. For example, it is possible to have a KVM session
open to the system while the system is rebooting and actually
configure the BIOS remotely over WLAN thanks to AMT.
How all this is related to Linux
--------------------------------
In Linux, there is a driver that allows the OS to talk to the
CSME firmware, this driver is drivers/misc/mei. This driver
advertises a bus that allows other kernel drivers or even user
space) to talk to components inside the CSME firmware.
In practice, the system advertises a PCI device that allows
to send / receive data to / from the CSME firmware. The mei
bus drivers in drivers/misc/mei is an abstration on top of
this PCI device.
The driver being added here is called iwlmei and talks to the
WLAN driver inside the CSME firmware through the mei bus driver.
Note that the mei bus driver only gives bus services, it doesn't
define the content of the communication.
Why do we need this driver?
--------------------------
CSME uses the same WLAN device that the OS is expecting to see
hence we need an arbitration mechanism. This is what iwlmei is
in charge of. iwlmei maintains the communication with the CSME
firmware's WLAN driver. The language / protocol that is used
between the CSME's firmware WLAN driver and iwlmei is OS agnostic
and is called SAP which stands for Software Abritration Protocol.
With SAP, iwlmei will be able to tell the CSME firmware's WLAN
driver:
1) Please give me the device.
2) Please note that the SW/HW rfkill state change.
3) Please note that I am now associated to X.
4) Please note that I received this packet.
etc...
There are messages that go the opposite direction as well:
1) Please note that AMT is en/disable.
2) Please note that I believe the OS is broken and hence I'll take
the device *now*, whether you like it or not, to make sure that
connectivity is preserved.
3) Please note that I am willing to give the device if the OS
needs it.
4) Please give me any packet that is sent on UDP / TCP on IP address
XX.XX.XX.XX and an port ZZ.
5) Please send this packet.
etc...
Please check drivers/net/wireless/intel/iwlwifi/mei/sap.h for the
full protocol specification.
Arbitration is not the only purpose of iwlmei and SAP. SAP also
allows to maintain the AMT's functionality even when the OS owns
the device. To connect to AMT, one needs to initiate an HTTP
connection to port 16992. iwlmei will listen to the Rx path and
forward (through SAP) to the CSME firmware the data it got. Then,
the embedded HTTP server in the chipset will reply to the request
and send a SAP notification to ask iwlmei to send the reply.
This way, AMT running on the CSME can still work.
In practice this means that all the use cases quoted above (KVM,
remote IDE device, etc...) will work even when the OS uses the
WLAN device.
How to disable all this?
---------------------------
iwlmei won't be able to do anything if the CSME's networking stack
is not enabled. By default, CSME's networking stack is disabled (this
is a BIOS setting).
In case the CSME's networking stack is disabled, iwlwifi will just
get access to the device because there is no contention with any other
actor and, hence, no arbitration is needed.
In this patch, I only add the iwlmei driver. Integration with
iwlwifi will be implemented in the next one.
Co-Developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
v2: fix a few warnings raised by the different bots
v3: rewrite the commit message
v4: put the debugfs content in a different patch
v5: fix a NULL pointer dereference upon DHCP TX if SAP is connected
since we now have the required cfg80211 bits in wl-drv-next, add
the RFKILL handling patch to this series.
v6: change the SAP API to inherit the values from iwl-mei.h removing
the need to ensure the values are equal with a BUILD_BUG_ON.
This was suggested by Arend
v7: * fix a locking issue in case of CSME firmware reset:
When the CSME firmware resets, we need to unregister the
netdev, first take the mutex, and only then, rely on it
being taken.
* Add a comment to explain why it is ok to have static variables
(iwlmei can't have more than a single instance).
* Add a define for 26 + 8 + 8
* Add a define SEND_SAP_MAX_WAIT_ITERATION
* make struct const
* Reword a bit the Kconfig help message
* Ayala added her Signed-off
* fixed an RCU annotation
v8: do not require ownership upfront, use NIC_OWNER instead. This fixes
a deadlock when CSME does not have the right WiFi FW.
Add more documentation about the owernship transition
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112062814.7502-2-emmanuel.grumbach@intel.com
Should an error occur (invalid TLV len or memory allocation failure), the
memory already allocated in 'reduce_power_data' should be freed before
returning, otherwise it is leaking.
Fixes: 9dad325f9d ("iwlwifi: support loading the reduced power table from UEFI")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1504cd7d842d13ddb8244e18004523128d5c9523.1636615284.git.christophe.jaillet@wanadoo.fr
Fix warnings produced by:
- lockdep_assert_wiphy() in function reg_process_self_managed_hint(),
- wiphy_dereference() in function iwl_mvm_init_fw_regd().
Both function are expected to be called in critical section.
The warnings were discovered when running v5.15 kernel
with debug options enabled:
1)
Hardware name: Google Delbin/Delbin
RIP: 0010:reg_process_self_managed_hint+0x254/0x347 [cfg80211]
...
Call Trace:
regulatory_set_wiphy_regd_sync+0x3d/0xb0
iwl_mvm_init_mcc+0x49d/0x5a2
iwl_op_mode_mvm_start+0x1b58/0x2507
? iwl_mvm_reprobe_wk+0x94/0x94
_iwl_op_mode_start+0x146/0x1a3
iwl_opmode_register+0xda/0x13d
init_module+0x28/0x1000
2)
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c:263 suspicious rcu_dereference_protected() usage!
...
Hardware name: Google Delbin/Delbin, BIOS Google_Delbin
Call Trace:
dump_stack_lvl+0xb1/0xe6
iwl_mvm_init_fw_regd+0x2e7/0x379
iwl_mvm_init_mcc+0x2c6/0x5a2
iwl_op_mode_mvm_start+0x1b58/0x2507
? iwl_mvm_reprobe_wk+0x94/0x94
_iwl_op_mode_start+0x146/0x1a3
iwl_opmode_register+0xda/0x13d
init_module+0x28/0x100
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Łukasz Bartosik <lb@semihalf.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211110215744.5487-1-lukasz.bartosik@semihalf.com
In some very rare cases the init flow may fail. In many cases, this is
recoverable, so we can retry. Implement a loop to retry two more times
after the first attempt failed.
This can happen in two different situations, namely during probe and
during mac80211 start. For the first case, a simple loop is enough.
For the second case, we need to add a flag to prevent mac80211 from
trying to restart it as well, leaving full control with the driver.
Cc: <stable@vger.kernel.org>
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211110150132.57514296ecab.I52a0411774b700bdc7dedb124d8b59bf99456eb2@changeid
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'ret'.
Eliminate the follow smatch warning:
drivers/net/wireless/intel/iwlwifi/pcie/drv.c:1376 iwl_pci_probe() warn:
missing error code 'ret'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 1f171f4f14 ("iwlwifi: Add support for getting rf id with blank otp")
Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1635838727-128735-1-git-send-email-jiapeng.chong@linux.alibaba.com
Both gcc-11 and clang point out a potential issue with integer overflow when
the iwl_dev_info_table[] array is empty. This is what clang warns:
drivers/net/wireless/intel/iwlwifi/pcie/drv.c:1344:42: error: implicit conversion from 'unsigned long' to 'int' changes value from 18446744073709551615 to -1 [-Werror,-Wconstant-conversion]
for (i = ARRAY_SIZE(iwl_dev_info_table) - 1; i >= 0; i--) {
~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~
This is still harmless, as the loop correctly terminates, but adding
an extra range check makes that obvious to both readers and to the
compiler.
Fixes: 3f7320428f ("iwlwifi: pcie: simplify iwl_pci_find_dev_info()")
Reported-by: kernel test robot <lkp@intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211118142124.526901-1-arnd@kernel.org
Add const to the address param of ipw_send_adapter_address()
all the functions down the chain have already been changed.
Not sure how I lost this in the rebase.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space
and avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace
to work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction,
by exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec
offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP
buffer pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x
and Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we
can add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements
to CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=srde
-----END PGP SIGNATURE-----
Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
The end goal of the current buffer overflow detection work[0] is to gain
full compile-time and run-time coverage of all detectable buffer overflows
seen via array indexing or memcpy(), memmove(), and memset(). The str*()
family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this series
contains the foundational elements of several related buffer overflow
detection improvements by providing new common helpers and FORTIFY_SOURCE
changes needed to gain the introspection required for compiler visibility
into array sizes. Also included are a handful of already Acked instances
using the helpers (or related clean-ups), with many more waiting at the
ready to be taken via subsystem-specific trees[2]. The new helpers are:
- struct_group() for gaining struct member range introspection.
- memset_after() and memset_startat() for clearing to the end of structures.
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in structs.
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage under
GCC, and to prepare to fix the currently broken Clang support. Finishing
this work is part of the larger series[0], but depends on all the false
positives and buffer overflow bug fixes to have landed already and those
that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a compile-time
and run-time tests are added for FORTIFY_SOURCE and the mem*()-family
functions respectively. The compile time tests have found a legitimate
(though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage that
result in no known object code differences.
After this series (and the changes that have now landed via netdev
and usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds. However, due corner cases in
GCC[3] and Clang[4], I have not included the last two patches that turn
on these options, as I don't want to introduce any known warnings to
the build. Hopefully these can be solved soon.
[0] https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE
[2] https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/
[3] https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/
[4] https://bugs.llvm.org/show_bug.cgi?id=51682
[5] https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/
[6] https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/
-----BEGIN PGP SIGNATURE-----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=9xbT
-----END PGP SIGNATURE-----
Merge tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"The end goal of the current buffer overflow detection work[0] is to
gain full compile-time and run-time coverage of all detectable buffer
overflows seen via array indexing or memcpy(), memmove(), and
memset(). The str*() family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this
series contains the foundational elements of several related buffer
overflow detection improvements by providing new common helpers and
FORTIFY_SOURCE changes needed to gain the introspection required for
compiler visibility into array sizes. Also included are a handful of
already Acked instances using the helpers (or related clean-ups), with
many more waiting at the ready to be taken via subsystem-specific
trees[2].
The new helpers are:
- struct_group() for gaining struct member range introspection
- memset_after() and memset_startat() for clearing to the end of
structures
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in
structs
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage
under GCC, and to prepare to fix the currently broken Clang support.
Finishing this work is part of the larger series[0], but depends on
all the false positives and buffer overflow bug fixes to have landed
already and those that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a
compile-time and run-time tests are added for FORTIFY_SOURCE and the
mem*()-family functions respectively. The compile time tests have
found a legitimate (though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage
that result in no known object code differences.
After this series (and the changes that have now landed via netdev and
usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds.
However, due corner cases in GCC[3] and Clang[4], I have not included
the last two patches that turn on these options, as I don't want to
introduce any known warnings to the build. Hopefully these can be
solved soon"
Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1]
Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2]
Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3]
Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4]
Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5]
Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6]
* tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
fortify: strlen: Avoid shadowing previous locals
compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer
treewide: Replace 0-element memcpy() destinations with flexible arrays
treewide: Replace open-coded flex arrays in unions
stddef: Introduce DECLARE_FLEX_ARRAY() helper
btrfs: Use memset_startat() to clear end of struct
string.h: Introduce memset_startat() for wiping trailing members and padding
xfrm: Use memset_after() to clear padding
string.h: Introduce memset_after() for wiping trailing members/padding
lib: Introduce CONFIG_MEMCPY_KUNIT_TEST
fortify: Add compile-time FORTIFY_SOURCE tests
fortify: Allow strlen() and strnlen() to pass compile-time known lengths
fortify: Prepare to improve strnlen() and strlen() warnings
fortify: Fix dropped strcpy() compile-time write overflow check
fortify: Explicitly disable Clang support
fortify: Move remaining fortify helpers into fortify-string.h
lib/string: Move helper functions out of string.c
compiler_types.h: Remove __compiletime_object_size()
cm4000_cs: Use struct_group() to zero struct cm4000_dev region
can: flexcan: Use struct_group() to zero struct flexcan_regs regions
...
When we receive an association response, a significant amount
of time might have passed since we sent the corresponding
association request (mac80211 will wait up to 500ms for the TX
and then 100ms for the response after ACK was received). But
the time event is touched only when we send the assoc request,
so it might not have much time remaining, more easily causing
the (dreaded)
No beacon heard and the session protection is over already...
message.
Refactor iwl_mvm_mac_mgd_prepare_tx() and split out a new
function iwl_mvm_protect_assoc(), and call it on successful
association to extend the time event to the minimum time if
necessary.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024181719.411c174d9e5e.I03c701c2e9e6788f34546e538264763db0ab30ef@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If we somehow get disassociated while still waiting for a beacon
during connection, we can end up printing the
No beacon heard and the session protection is over already...
message even if we aren't really quite waiting for it anymore.
Remove the time event, if it's running, when we get disassociated
and don't need to wait for beacons anymore.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024181719.6192e2363784.Ie9c2bfdc30dcfff2c4dd7c393c79e3ac182840a9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When this code was implemented, there was no official FW API
description yet, so a placeholder name was used (GEO_TX_POWER_LIMIT).
But then the command became actually called
PER_CHAIN_LIMIT_OFFSET_CMD. Rename the command (and change related
comments) to PER_CHAIN_LIMIT_OFFSET_CMD to avoid confusion.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024181719.672fa727ef75.I6572df5d1e3441a0214993a59985da9a9431f3e5@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Trying to convert from one firmware data representation to the
next version is getting tedious and error-prone, and doesn't
lend itself well to new APIs being added. Additionally, the
version 11 of the API as defined in the driver doesn't even
exist in the firmware.
Instead of converting to a newer firmware version of the data,
convert to an internal representation. This takes a bit more
space because the TKIP/AES counters etc. must be kept twice,
their representation is different and we don't know which of
the ones it is until later, but this is just a temporary use
of memory, and the code is clearer this way.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024181719.9e71630627f3.Iad975e15338844ca068683f62a51eb1fcb69e608@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We currently match the list of devices from the start to
the end, but then find the *last* match, so we need to
look at each and every entry. We don't want to change the
semantics ("most generic entry must come first"), so just
change the order of matching to be back-to-front, then we
can break out once we find a match.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024165252.abd85e1391cb.I7681fe90735044cc1c59f120e8591b7ac125535d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
There's a new revision of the WGDS table with more data,
and corresponding firmware API to pass it through. Add
support for both.
Since we now support 4 different versions, make a table
to load them instead of hard-coding it all.
Signed-off-by: Ayala Barazani <ayala.barazani@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024165252.2f9b8e304f25.If88d2d1309270e659d4845c5b5c22d5e8d8e2caf@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
To improve chances of hearing beacons and probe responses during
a scan which (based on the scan request parameters) looks like a
roaming scan, enable reception on all chains.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024165252.f115ad455aca.I5de854fe8ce58c85c21a7adf43526acb29156a08@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The "Killer(R) Wi-Fi 6 AX1650w 160MHz Wireless Network Adapter (200D2W)"
and "Killer(R) Wi-Fi 6 AX1650x 160MHz Wireless Network Adapter (200NGW)"
names couldn't match properly because the most generic entry needs to be
specified last.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024165252.86a430e5b2ff.I7a9e89df7ddfc939690d3718d41afc934a4d4ea0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If a region is not active, it means that it was not defined as a region
TLV in the FW image. We should treat them as unsupported in that case.
This saves operational driver memory and run time when collecting debug
data by skipping unsupported regions.
Signed-off-by: Rotem Saado <rotem.saado@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.8025bd29d86a.I3ecb4e273bf714e426d82217e0590264cb763419@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Read the bitmap from the ACPI and pass it to he FW
through LARI_CONFIG_CHANGE_CMD.
This allows OEMs to override channel state to active
as per Geo Location bitmap.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.23d4f2d182c0.I39ac5ff74ac6f2223f393657205eddc1c8e48890@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sometimes driver fails to detect misbehaving AP since we may
miss a few beacons (AP is declared misbehaving only after the second
time CSA counter has a wrong jump).
Move the print to the start of the function to avoid doubts when
analysing this kind of issues.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.8e6b1eb8a436.I5fd6caee968007e91d03b93d6ea84b670ce047e9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Set BT coex high priority during the 802.1X handshake to avoid
issues where BT is active enough to kill all the big negotiation
frames that we may need to send (e.g. with a large certificate),
leading to the connection not being established correctly. Give
WiFi priority over BT during this short but critical phase.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.a1825bbba397.I10315577fb41dfcec15c92e8f6785d9655f74c6a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
in case allocation tlv is missing for specific dbgc id,
treat it as allocation failure.
with this behavior we removing later the unsupported regions
relating to the failed dbgc allocation.
this saves operational driver memory and run time at collecting
debug data.
Signed-off-by: Rotem Saado <rotem.saado@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.4cd241abf1de.I8f6cf00a7266675dfebdc01a73c1ac6e001855b9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Code tried to avoid setting ACs for PS-poll by an early return.
However as a result the timeouts weren't set as well.
Inactivity timeout of zero means we will always try to go back to
sleep immediately after moving to AM, which doesn't make much sense,
and isn't supported by FW.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.dda7f6ba0b22.Ia107bfe496b84e8a2edb33d9f39a5d2b56ed63f7@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sometimes some NICs may fail to initialize, but if we have
such a scenario we may only see an alive timeout (i.e. the
firmware doesn't send us the alive message), and that will
only cause us to fail the interface up.
Try to once grab NIC access during device probe to ensure
we can properly talk to the hardware at all, and to do all
the potential workarounds in that function.
Since we now finish NIC init here, we can remove it from
the later potential read of the RF ID.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.604dfc8f43bd.I07b58a5c9238f75413a91198452ba1268ee79425@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Evidently, it's possible to hit this issue, so reduce the
noise from it by just having it print a (rate-limited)
message instead. We don't really know yet why we hit it,
but there's no value in having a WARN_ON() here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.8d503387b523.Id2c82d023df5128e553b28c935d30df4d9411917@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sometimes we might want to have an error message for something
related to TX/RX, but if that somehow happens frequently it'll
overwhelm the logs. Add IWL_ERR_LIMIT() to alleviate that by
rate-limiting those messages.
To do this, rework __iwl_err() a bit to have a mode argument
instead of passing yet another (bool) argument to it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.2cb1e6b75672.Iec5b1c1bcc6ebc87c586921a6c5c2a937f49e83c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When auth/assoc completes, we should remove session protection,
except when association is successful, where we need it until a
beacon is received from the AP.
In particular, in the case of assoc comeback, currently the session
protection event just times out, leading to confusing messages:
wlan0: 42:00:00:00:00:00 rejected association temporarily; comeback duration 1000 TU (1024 ms)
iwlwifi 0000:00:00.0: Not associated and the session protection is over already...
wlan0: Connection to AP 42:00:00:00:00:00 lost
wlan0: associate with 42:00:00:00:00:00 (try 2/3)
mac80211 never does anything on the "Connection ... lost" as it's
not even connected.
Removing the session protection when it's no longer needed removes
those confusing messages and lets the device do other things in the
allocated time.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.95e4bebb069b.I635280e5d26c70414ac6eb5d62b46fe4bd942818@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We don't need this argument, since in all cases where the
function is called, trans->trans_cfg is already set (it's
in fact set during allocation). Remove it to avoid any
confusion about it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.cb04580b8521.I7129d4ba3dc689af839761d5807a10f99718893e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags, the RTS and CTS flags
are being removed from it. Instead, we have these flags
in the flags field in the TX command.
Add to new flags to the iwl_tx_cmd_flags enum.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.b5aaabb04432.I999f86ed6a9d9b99e63a33f724963f83f85fbb44@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Remove the unused csi parameter from
iwl_mvm_pass_packet_to_mac80211(). It is not used anymore, but was
accidentally left in.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20211017132604.480251-2-luca@coelho.fi
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags this two APIs
may use the new rate. Add support for the new rate.
These two APIs were updated in one patch because both of them
are using the same functions which were changed.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.7eb6240b8079.I1e804e70a8ebd23840a9431fc5d2a56ad8d5d1a2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags, a new version of this
structures was added in the FW. Add support for this new
version and for the new rate_n_flags in this API.
Both these APIs were updated in one patch since they are
using the same functions.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.a28e7a92f558.I19f72735c674f815c6e7c11cecfad6230b4510ef@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags, a new version of
BEACON_TEMPLATE_CMD was added in FW in order to support
the new rate_n_flags.
Add support for the new version.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.b42e67f14293.Ic3f1ed8cb3a31cfaa51174497dd993936b00d398@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Previously added BZ reset wasn't taking into account the
call to iwl_trans_pcie_sw_reset which used a pre-BZ logic
to reset the device - enabling iwl_trans_pcie_sw_reset to
support BZ family made this reset redundant.
MAC_ACCESS clear shouldn't be called here but only when calling
_iwl_trans_pcie_stop_device which now support also BZ family.
Signed-off-by: Roee Goldfiner <roee.h.goldfiner@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.648931fe07e2.Ibf30f9b8e70536da93c4a574ace33d325d3f8da4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Add new TLV for debug config set to read preset
based on TLV is set in context info.
This is needed to set the preset based on ucode in early
trigger point.
Add DRAM frag allocation info in first fragment of
DBGC1 with all details.
New capability from FW for DBGC frag debug support is
added and BUFFER_ALLOCATION_CMD is disabled in capability
is supported.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.cacf0babc521.If3704b5fda09b344e3e438252360898a3f2e90fa@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags, FW added a new version for
LOCATION_RANGE_RSP_NTFY, and it's internal structure -
LOCATION_RANGE_RSP_AP_ETRY_NTFY. Add support for this.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.c5c6c863631e.I4b493f4eeabbfa1dc965ae012b72fc57de7d5f4f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags, a new version of tlc_update_notif
was added in FW in order to support the new rate_n_flags.
Add support for the new version, and move the all API to use the
new rate_n_flags only (if FW supports the old one - convert it).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.9fc0cb5d5898.I1f88e02317f79f1be7f792c01236d836045a44b3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate & flags, convert an old format rate to
the new. This is needed if the driver supports the new format
but the FW supports the old one.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.1ea5263dafec.Iadffe7cb26554d4c23c9242eb2ec8326306202a9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Use the previously added infrastructure to scrub key material
in firmware dumps:
* in the TX FIFO data, just search for each key that we
know about and override such data
* scrub various commands that we sent to the firmware if
they're present
* in firmware memory, where advertised by firmware TLVs
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.d1514964e6a7.I18f8c2ce8082952af7cfe5f8fe75fe51851b8853@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In firmware dumps, currently all kinds of key material may be
included, e.g. in host commands (if firmware crashes during the
processing of a key-related command) or in the TX FIFO(s) if
we have been using in-TX-command key material.
Additionally, some firmware versions will advertise sections
of their internal data to not dump, due to them containing some
sensitive data.
Add some infrastructure to allow scrubbing this data out, as
dependent on the opmode's idea of what will need to be done.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.360cc8fe55b1.Ie3bd3ece38043969f7e116e61a6ec1197a58d78b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We still had the entire license statement here, but with BSD,
so the SPDX tag was not matching the actual text. Fix that
and remove all the texts since they're no longer needed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.328c2b33081c.Ib3570e8f214538a878204cc2b0b612b5ed0571b3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Consensus seems to be emerging that corporations or groups
shouldn't be listed as module authors, and we will not
maintain this email address any longer. Just remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.32109514aad0.I91a7d745f4ab50ee8ef918ece00dda8251541595@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
On some RFs we want to advertise vendor specific capabilities to
indicate support for improved beamforming rates and/or on 160 MHz,
some APs where Intel has collaborated with the vendor will use it
to improve behaviour. Add these elements where relevant, i.e. for
HR and GF RFs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.510f0ef9c2d5.If99bdb9009583ac7cc6cbb708e871a67df836dbe@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Just like we have default SMPS mode as dynamic in powersave,
we should not enable RX-diversity in powersave, to reduce
power consumption when connected to a non-MIMO AP.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.fc896bc5cdaa.I1d11da71b8a5cbe921a37058d5f578f1b14a2023@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We should consider the P2P interface type, which isn't in
vif->type due to mac80211's special handling of that. Use
ieee80211_vif_type_p2p() to convert appropriately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.8e992a3beee2.I4231ac8a7ae8f844e35a1ec221baf3e2b676e765@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Start scratch debug register for Bz family.
This register is used for FW debug, and the driver
should start this register with a fixed value, during
init, and upon an error, should read it, and add it to
the dump.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.609ad58a49f3.I05c351233601ecc51dddfa5df69ace292216eb95@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When having a blank OTP the only way to get the rf id
and the cdb info is from prph registers.
Currently there is some implementation for this, but it
is located in the wrong place in the code (should be before
trying to understand what HW is connected and not after),
and it has a partial implementation.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.820c2ae18c2b.Iec9b2e2615ce65e6aff5ce896589227a7030f4cf@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
netdev->dev_addr will be come const soon, constify the argument
to command send to avoid compiler warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-10-kuba@kernel.org
The integrated So devices covered by the iwl_so_long_latency_trans_cfg
configuration should all have low-latency-xtal enabled, so do that.
While at it, remove the TODO, I've checked the other values as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 6f60fb03c8 ("iwlwifi: move SnJ and So rules to the new tables")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211016114029.8b5480113f53.I80b5b4ebea84e56f3b3143fc1ee7097be8b4ae78@changeid
If resume fails for some reason, we need to set the PM state
back to normal so we're able to send commands during firmware
reset, rather than failing all of them because we're in D3.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 708a39aaca ("iwlwifi: mvm: don't send commands during suspend\resume transition")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211016114029.7ceb9eaca9f6.If0cbef38c6d07ec1ddce125878a4bdadcb35d2c9@changeid
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/0855d51423578ad019c0264dad3fe47a2e8af9c7.1633849511.git.christophe.jaillet@wanadoo.fr
Use dma_alloc_coherent() instead of pci_alloc_consistent(),
because only dma_alloc_coherent() is called here.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210925124621.197-1-caihuoqing@baidu.com
There is a Killer AX1650 2x2 Wi-Fi 6 and Bluetooth 5.1 wireless adapter
found on Dell XPS 15 (9510) laptop, its configuration was present on
Linux v5.7, however accidentally it has been removed from the list of
supported devices, let's add it back.
The problem is manifested on driver initialization:
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
iwlwifi: No config found for PCI dev 43f0/1651, rev=0x354, rfid=0x10a100
iwlwifi: probe of 0000:00:14.3 failed with error -22
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213939
Fixes: 3f910a2583 ("iwlwifi: pcie: convert all AX101 devices to the device tables")
Cc: Julien Wajsberg <felash@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Luca Coelho <luca@coelho.fi>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210924122154.2376577-1-vladimir.zapolskiy@linaro.org
This code was refactored and the mutex_unlock(&mvm->mutex); was
accidentally deleted.
Fixes: af3aab9ce2 ("iwlwifi: mvm: d3: make key reprogramming iteration optional")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Luca Coelho <luca@coelho.fi>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210831081849.GB9846@kili
These should be >= ARRAY_SIZE() instead of > ARRAY_SIZE() to prevent an
out of bounds write on the next line.
Fixes: 79e561f0f0 ("iwlwifi: mvm: d3: implement RSC command version 5")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Luca Coelho <luca@coelho.fi>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210831081802.GA9846@kili
In __iwl_mvm_remove_time_event() check that 'te_data->vif' is NULL
before dereferencing it.
Fixes: 7b3954a1d6 ("iwlwifi: mvm: Explicitly stop session protection before unbinding")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210907143156.e80e52167d93.Ie2247f43f8acb2cee6dff5b07a3947c79a772835@changeid
wireless and can.
Current release - regressions:
- qrtr: revert check in qrtr_endpoint_post(), fixes audio and wifi
- ip_gre: validate csum_start only on pull
- bnxt_en: fix 64-bit doorbell operation on 32-bit kernels
- ionic: fix double use of queue-lock, fix a sleeping in atomic
- can: c_can: fix null-ptr-deref on ioctl()
- cs89x0: disable compile testing on powerpc
Current release - new code bugs:
- bridge: mcast: fix vlan port router deadlock, consistently disable BH
Previous releases - regressions:
- dsa: tag_rtl4_a: fix egress tags, only port 0 was working
- mptcp: fix possible divide by zero
- netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex
- netfilter: socket: icmp6: fix use-after-scope
- stmmac: fix MAC not working when system resume back with WoL active
Previous releases - always broken:
- ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL
address
- seg6: set fc_nlinfo in nh_create_ipv4, nh_create_ipv6
- mptcp: only send extra TCP acks in eligible socket states
- dsa: lantiq_gswip: fix maximum frame length
- stmmac: fix overall budget calculation for rxtx_napi
- bnxt_en: fix firmware version reporting via devlink
- renesas: sh_eth: add missing barrier to fix freeing wrong tx descriptor
Stragglers:
- netfilter: conntrack: switch to siphash
- netfilter: refuse insertion if chain has grown too large
- ncsi: add get MAC address command to get Intel i210 MAC address
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Zvuz
-----END PGP SIGNATURE-----
Merge tag 'net-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes and stragglers from Jakub Kicinski:
"Networking stragglers and fixes, including changes from netfilter,
wireless and can.
Current release - regressions:
- qrtr: revert check in qrtr_endpoint_post(), fixes audio and wifi
- ip_gre: validate csum_start only on pull
- bnxt_en: fix 64-bit doorbell operation on 32-bit kernels
- ionic: fix double use of queue-lock, fix a sleeping in atomic
- can: c_can: fix null-ptr-deref on ioctl()
- cs89x0: disable compile testing on powerpc
Current release - new code bugs:
- bridge: mcast: fix vlan port router deadlock, consistently disable
BH
Previous releases - regressions:
- dsa: tag_rtl4_a: fix egress tags, only port 0 was working
- mptcp: fix possible divide by zero
- netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex
- netfilter: socket: icmp6: fix use-after-scope
- stmmac: fix MAC not working when system resume back with WoL active
Previous releases - always broken:
- ip/ip6_gre: use the same logic as SIT interfaces when computing
v6LL address
- seg6: set fc_nlinfo in nh_create_ipv4, nh_create_ipv6
- mptcp: only send extra TCP acks in eligible socket states
- dsa: lantiq_gswip: fix maximum frame length
- stmmac: fix overall budget calculation for rxtx_napi
- bnxt_en: fix firmware version reporting via devlink
- renesas: sh_eth: add missing barrier to fix freeing wrong tx
descriptor
Stragglers:
- netfilter: conntrack: switch to siphash
- netfilter: refuse insertion if chain has grown too large
- ncsi: add get MAC address command to get Intel i210 MAC address"
* tag 'net-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
ieee802154: Remove redundant initialization of variable ret
net: stmmac: fix MAC not working when system resume back with WoL active
net: phylink: add suspend/resume support
net: renesas: sh_eth: Fix freeing wrong tx descriptor
bonding: 3ad: pass parameter bond_params by reference
cxgb3: fix oops on module removal
can: c_can: fix null-ptr-deref on ioctl()
can: rcar_canfd: add __maybe_unused annotation to silence warning
net: wwan: iosm: Unify IO accessors used in the driver
net: wwan: iosm: Replace io.*64_lo_hi() with regular accessors
net: qcom/emac: Replace strlcpy with strscpy
ip6_gre: Revert "ip6_gre: add validation for csum_start"
net: hns3: make hclgevf_cmd_caps_bit_map0 and hclge_cmd_caps_bit_map0 static
selftests/bpf: Test XDP bonding nest and unwind
bonding: Fix negative jump label count on nested bonding
MAINTAINERS: add VM SOCKETS (AF_VSOCK) entry
stmmac: dwmac-loongson:Fix missing return value
iwlwifi: fix printk format warnings in uefi.c
net: create netdev->dev_addr assignment helpers
bnxt_en: Fix possible unintended driver initiated error recovery
...
The variable 'package_size' is an unsigned long, and should be printed
out using '%lu', not '%zd' (that would be for a size_t).
Yes, on many architectures (including x86-64), 'size_t' is in fact the
same type as 'long', but that's a fairly random architecture definition,
and on some platforms 'size_t' is in fact 'int' rather than 'long'.
That is the case on traditional 32-bit x86. Yes, both types are the
exact same 32-bit size, and it would all print out perfectly correctly,
but '%zd' ends up still being wrong.
And we can't make 'package_size' be a 'size_t', because we get the
actual value using efivar_entry_get() that takes a pointer to an
'unsigned long'. So '%lu' it is.
This fixes two of the i386 allmodconfig build warnings (that is now an
error due to -Werror).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel test robot reports printk format warnings in uefi.c, so
correct them.
../drivers/net/wireless/intel/iwlwifi/fw/uefi.c: In function 'iwl_uefi_get_pnvm':
../drivers/net/wireless/intel/iwlwifi/fw/uefi.c:52:30: warning: format '%zd' expects argument of type 'signed size_t', but argument 7 has type 'long unsigned int' [-Wformat=]
52 | "PNVM UEFI variable not found %d (len %zd)\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
53 | err, package_size);
| ~~~~~~~~~~~~
| |
| long unsigned int
../drivers/net/wireless/intel/iwlwifi/fw/uefi.c:59:29: warning: format '%zd' expects argument of type 'signed size_t', but argument 6 has type 'long unsigned int' [-Wformat=]
59 | IWL_DEBUG_FW(trans, "Read PNVM from UEFI with size %zd\n", package_size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~
| |
| long unsigned int
Fixes: 84c3c9952a ("iwlwifi: move UEFI code to a separate file")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210821020901.25901-1-rdunlap@infradead.org
A firmware is requested but never released in this function. This leads to
a memory leak in the normal execution path.
Add the missing 'release_firmware()' call.
Also introduce a temp variable (new_len) in order to keep the value of
'pnvm->size' after the firmware has been released.
Fixes: cdda18fbbe ("iwlwifi: pnvm: move file loading code to a separate function")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Luca Coelho <luca@coelho.fi>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1b5d80f54c1dbf85710fd285243932943b498fe7.1630614969.git.christophe.jaillet@wanadoo.fr
Start supporting API version 66 for AX devices.
Th iwlwifi FW API is frozen every 6 weeks, so we need to bump the
newest version number that the driver supports accordingly. In this
specific case, support for new HW will only be possible with the new
FW version. This change still keeps backwards compatibility with
older FW API versions for existing devices.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210901101412.300012-1-luca@coelho.fi
The Samsung Galaxy Book Flex2 Alpha uses an ax201 with the ID a0f0/6074.
This works fine with the existing driver once it knows to claim it.
Simple patch to add the device.
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210702223155.1981510-1-jforbes@fedoraproject.org
Due to a rebase damage, we lost the rtnl_lock() when the patch was
sent out. This causes an RTNL imbalance and failed assertions, due to
missing RTNL protection, for instance:
RTNL: assertion failed at net/wireless/reg.c (4025)
WARNING: CPU: 60 PID: 1720 at net/wireless/reg.c:4025 regulatory_set_wiphy_regd_sync+0x7f/0x90 [cfg80211]
Call Trace:
iwl_mvm_init_mcc+0x170/0x190 [iwlmvm]
iwl_op_mode_mvm_start+0x824/0xa60 [iwlmvm]
iwl_opmode_register+0xd0/0x130 [iwlwifi]
init_module+0x23/0x1000 [iwlmvm]
Fix this by adding the missing rtnl_lock() back to the code.
Fixes: eb09ae93da ("iwlwifi: mvm: load regdomain at INIT stage")
Link: https://lore.kernel.org/lkml/CAHk-=wjB_zBwZ+WR9LOpvgjvaQn=cqryoKigod8QnZs=iYGEhA@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To check beacon protection had a mismatch of the key ID we
currently use the key ID from the firmware, but firmware
side we want to clean up the API to stop reporting this.
Instead, check the IWL_RX_MPDU_STATUS_KEY_VALID bit that
indicates that the firmware used the correct key, and if
that's set but we get invalid MIC/replay use the key ID
from the frame to look up the key and notify mac80211 of
MIC error or replay. Since both keys must have the same
cipher and thus MIC length, we can use either of them to
look up the MIC length.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.30e665d39b07.I78bf7d304ef5a80cecf5fa1c1fca0b51b956cceb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This version adds the following configuration options:
1. Enable/disable setting the session id in the FTM frame
2. Set the BSS color for the responder
3. Set the minimum and maximum time between measurements for
non trigger based NDP ranging.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.0a10d43f3d7f.Ice4112c1910cf94babd1c2d492a3a3de9f7ee6cb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This version adds the following configuration options:
1. Set the BSS color for NDP ranging
2. Set the minimum and maximum time between measurements for
non trigger based NDP ranging.
3. Terminate the session in case the responder requests LMR feedback.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.9dcd5210b7e5.I76f6977cde852de0f251344e279ad85076eef8d6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We can send this even if initializing in RF-kill, thus
suppressing a bunch of error messages about it. In fact,
we _want_ to, since we might still want to debug the
firmware even if in RF-kill.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210819183728.bcdb076609e2.I2d177c00772510b5338d8aa45af7558138b08448@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When P2P roc is removed, the IWL_MVM_STATUS_NEED_FLUSH_P2P bit is set
to indicate to iwl_mvm_roc_done_wk() that the removed roc is a P2P
one, so it will flush the broadcast station and not the aux station.
However, since setting this bit and scheduling the worker is done
in roc ended flow as well as in case the roc is removed, there is
a race where the worker has already started running (but did not
test this bit yet) and then it is scheduled again. In this case,
the first run of the worker will clear this bit, and thus the second
run will find it already cleared and will try to flush and remove
the aux station by mistake.
Fix it by scheduling the worker only if this bit is not yet set. In
case this bit is already set, the worker is either running or
scheduled, so there is no need to re-schedule it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210819183728.8c147659b331.If5924375e9bfd46214ab8ab81cb9d0f5c82fbcbc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The debug dump ranges aren't just an array of such ranges
since each range has a variable size. Therefore, the use
of a struct array is misleading at best.
Change it to be a u8 data[] instead of the struct array,
the code doesn't significantly change since it's actually
doing things correctly now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210819183728.693c9891097d.Idcaab1fd659e8be2f56be647b2534befd61a4460@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We don't use this, but we embed this struct elsewhere and
having structs with flexible arrays embedded isn't quite
right, with sparse (for example) complaining. Remove the
data[] member in this case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210819183728.72ca1232b27c.I6ec766691b89670e1683f9fc0fbd12648309a574@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
DMA-API debug code pointed out that in this code path we
never check the return value of dma_map_page(), which could
fail.
However, we don't really even want to unmap/remap, we just
want to ensure that we can actually access the last version
of the data that the (now-dead) device may have written, so
only need to dma_sync_single_for_cpu() instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210819183728.5987f35883a2.I2d9ea5ecc69a5e5947b546fb15f33363a0595651@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We used to load the regdomain only in the load stage,
this caused the 'iw phy phy0 reg get' command to fail if we
booted a machine with wifi off.
Therefor we should load it in INIT stage already.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.a6077801d7d5.I7d8d5c895bc467efbf81ea055dde366ea01cced1@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We used to read the PPAG, WRDS, EWRD, WGDS tables from ACPI
in the load stage only. This prevented vendor commands from
being executed before bringing the interface up. Move reading those tables
to INIT stage.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.ce3b60f0b426.I3643bf00e714aae930880cc7d6cf390b142eaccb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In commit 79f033f6f2 ("iwlwifi: dbg: don't limit dump decisions
to all or monitor") we changed the code to pass around a bitmap,
but in the monitor_only case, one place accidentally used the bit
number, not the bit mask, resulting in CSR and FW_INFO getting
dumped instead of monitor data. Fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.774fd8729a33.Ic985a787071d1c0b127ef0ba8367da896ee11f57@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
By mistake we were considering the first element of the WTAS wifi
package as part of the data we want to rid, but that element is the wifi
package signature (always 0x07), so it should be skipped.
Change the code to read the data starting from element 1 instead.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Fixes: 28dd7ccdc5 ("iwlwifi: acpi: read TAS table from ACPI and send it to the FW")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.ff8148197b15.I70636c04e37b2b57a5df3ce611511f62203d27a7@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The new version of the command has same size and layout as
version 10. It just sends corresponding station id in one
of the reserved fields. It's not used in the driver, so just
be ready to accept version 11.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.0a387598eef1.I3be0bbf603ef95c644218be8a12b329411f11646@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The GEO profiles have been stored in single-dimension arrays and the
access has been done via a single index. We will soon need to support
different revisions of this table, which will make the flat array even
harder to handle. To prepare for that, convert the single-dimension
array to a struct with substructures.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.56f3506411a2.I600ed3708d19f2263a5a8d143f6711d08499bbb0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Change the SAR profile tables storage to revision 2 regardless of the
revision we read from ACPI. Revision 2 is a superset of revision 1,
which is in turn a superset of revision 0, so they can all be stored
inside revision 2.
Add support for reading and storing also revisions 1 and 2, whose only
difference is the number of chains and number of sub-bands. So most
of the code revolves around passing different chain and sub-band
sizes.
With this patch we still pass only revision 0 to the firmware, but
that will be changed in a separate patch.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.2edad09415c8.I36297aef90a9ec6a3ea1bf1a151a62f272826d59@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This definition was only used to pass the size of the tables in the FW
API to the iwl_sar_select_profile() function, but we should actually
pass the definition from the FW API file. We don't have the concept
of tables in the ACPI definition, so we can remove it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.00b5084be918.I18efb3c45bffacfa9a356c2c8d34e5ffbb3eb423@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The SAR profiles have been stored in single-dimension arrays and the
access has been done via a single index. We will soon need to support
different revisions of this table, which will make the flat array even
harder to handle. To prepare for that, convert the single-dimension
array to a struct with substructures.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.01530088097f.I903c236a574c7e4c0fc4db101fc39c0f5415ca43@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
- Short SSIDs should always be added for direct SSIDs included
in the scan request. However, this was not done in case that
information for collocated APs was included. Fix this.
- With the above fix, if the FW also supports discovery of hidden
APs over the 6GHz band, also set the corresponding full SSID
information.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.02512b7a1443.Ibb023b09b86179ed049a195f4e32e887c2f4971d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When a station is removed, the driver-mac80211 station mapping is removed
before the station is actually deleted from the FW. As a result, it is
reasonable that the FW will continue to pass frames although the driver
doesn't have a station for them anymore. Thus change the message
severity level from ERR to DEBUG_DROP.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.a751177743c6.I5607504dade88ba461508643f58390dd661c05ba@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In later firmware we haven't needed the TSC anyway since
we have it already (and firmware image doesn't change),
but the new version adds the ability to send down replay
counters for more than one GTK. Implement that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.28cd065e8c4a.Ic8406a78ee46b07e0ca1b8199522ef08ec6eef53@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Now that only reprogramming is left in the initial key iteration,
skip it entirely on unified firmware images instead of skipping
only the command sending inside of it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.c6f77325c430.I798ce9d757492a9e3d223c1de5d4e62ebbc00b2c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If we're sending the KEK/KCK data we also need the GTK and
IGTK type, add a separate key iteration for that so we can
make the configure_key iteration optional later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.c99f86423702.Icf7d4e93be77ea05a80235d01851ad0155593de9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We do a key iteration to program the keys, and while at it
we also collect the data necessary for TKIP. This code has
all kinds of dependencies on the firmware API though, so
take out the TKIP phase 1 key generation and do that in a
separate key iteration only if necessary.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.80721fc0fd61.I5a8fbba4e3a9606f700ee41c7a4244dd5e2af935@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Both 'iwl_scan_probe_params_v3' and 'iwl_scan_probe_params_v4'
wrongly addressed the 'bssid_array' field which should supposed
to be any array of BSSIDs each of size ETH_ALEN and not the
opposite. Fix it.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802215208.04146f24794f.I90726440ddff75013e9fecbe9fa1a05c69e3f17b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Device startup changed in Bz, some register bits moved around.
Change the code accordingly.
The new Bz hardware changes also the way we wake it (grab NIC
access) and the way we disable bus mastering, update the driver
code accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802215208.00a137364a95.I059a2abac948965458862941ee7db6a2e1076fa6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
On Bz devices, the MAC address CSRs changed from 0x380 to 0x30.
Change the boolean configuration "mac_addr_from_csr" to hold the
base address instead, and set it correctly for the different
devices using this feature.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802215208.928c7983f014.Ic5ba92d98946c1b4640280a05dcfd75119c0f0c0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
There's no need for all the complicated conditions here, any
bufferable MMPDUs or MMPDUs for client interfaces are already
coming through the TXQ interface, not iwl_mvm_mac_tx().
Simplify the logic.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.3939f7c5c43a.I1d5cb5262e31a000023d79acbb897b8db50adf0d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Since switching to mac80211 TXQs, we no longer need to
advertise more hardware queues than ACs, since we don't
even set QUEUE_CONTROL anyway, so the vif->hw_queue[]
mapping array won't be used.
All we need (at least for now) is for hw->queues to
indicate that we have enough queues to handle QoS.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.80611a3c1ee7.I8a3d2b269421b6d8bada8c12cce3e095e6cfaeed@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When TVQM is enabled (iwl_mvm_has_new_tx_api() is true), then
queue numbers are just sequentially assigned 0, 1, 2, ...
Prior to TVQM, in DQA, there were some statically allocated
queue numbers:
* IWL_MVM_DQA_AUX_QUEUE == 1,
* both IWL_MVM_DQA_INJECT_MONITOR_QUEUE and
IWL_MVM_DQA_P2P_DEVICE_QUEUE == 2, and
* IWL_MVM_DQA_AP_PROBE_RESP_QUEUE == 9.
Now, these values are assigned to the members mvm->aux_queue,
mvm->snif_queue, mvm->probe_queue and mvm->p2p_dev_queue by
default. Normally, this doesn't really matter, and if TVQM is
in fact available we override them to the real values after
allocating a queue for use there.
However, this allocation doesn't always happen. For example,
for mvm->p2p_dev_queue (== 2) it only happens when the P2P
Device interface is started, if any. If it's not started, the
value in mvm->p2p_dev_queue remains 2. This wouldn't really
matter all that much if it weren't for iwl_mvm_is_static_queue()
which checks a queue number against one of those four static
numbers.
Now, if no P2P Device or monitor interface is added then queue
2 may be dynamically allocated, yet alias mvm->p2p_dev_queue or
mvm->snif_queue, and thus iwl_mvm_is_static_queue() erroneously
returns true for it. If it then gets full, all interface queues
are stopped, instead of just backpressuring against the one TXQ
that's really the only affected one.
This clearly can lead to issues, as everything is stopped even
if just a single TXQ filled its corresponding HW queue, if it
happens to have an appropriate number (2 or 9, AUX is always
reassigned.) Due to a mac80211 bug, this also led to a situation
in which the queues remained stopped across a deauthentication
and then attempts to connect to a new AP started failing, but
that's fixed separately.
Fix all of this by simply initializing the queue numbers to
the invalid value until they're used, if TVQM is enabled, and
also setting them back to that value when the queues are later
freed again.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.2e47e623f9e2.I9b0830dafbb68ef35b7b8f0f46160abec02ac7d0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The firmware SMPS request should only be honoured if the
connection is currently with HE and on 160 MHz, so check
that and then potentially reapply any request if the BW
changes.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.0cdcac5660da.I9ee7956fd4f48399855d1f97728bc58b36caf112@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When installing a (new) key, set the replay counter so that
after FW restart the firmware has the correct value of the
replay counters.
This doesn't have a large effect - for frames that reach
the driver, it will do a replay check, and when installing
a new key, the counter is normally zero to start with (not
for GTK though, if joining the BSS for the first time).
Since this only affects frames handled entirely by the FW,
and that's restricted to a few unicast management frames,
the only affect here is for those after a firmware restart.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.1cedf2ca7bb6.I2e609c28eaa301436e6740f4f1beca838f69a96a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
EAPOL failure results in deauthentication with various reasons, not
related to AUTH failure specifically, so we just merge AUTH failure
with failed to assoc to AP.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.2ff350d85eab.I02c5b5d29c0d5c2e014bd1081b07ed33772ae04d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Add support for discovery of hidden networks on the 6GHz band,
by including the scan request direct SSIDs in the FW scan request
command:
- In case a short SSID matches one of the direct SSIDs in the scan
request command, add the matching SSID in the same offset in the
'direct_ssids' array.
- Otherwise, add the SSID in one of the available slots.
Additionally, as a preparation to handle hidden APs, refactor
iwl_mvm_umac_scan_cfg_channels_v6_6g() the function.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.ffb540a70212.Ia2bb9bc9435b833820bcc7dc30adcedb5a5a9869@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The scan request processing populated the direct SSIDs
in the FW scan request command also for 6GHz scan, which is not
needed and might result in unexpected behavior.
Fix the code to add the direct SSIDs only in case the scan
is not a 6GHz scan.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.f465937c7bbf.Ic11a1659ddda850c3ec1b1afbe9e2b9577ac1800@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If the firmware crashes while we're waiting for the reset
handshake then it cannot possibly make progress anymore,
and we will just time out the wait. That's pointless, so
just stop waiting at that point.
Additionally, if it never acknowledges the reset handshake,
something went wrong.
Dump an error in both of these cases, but we need to do it
synchronously here since the device will be turned off.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.8b6a33544b4b.I55f97f70f8efa64db064a9207177a094c60ac8f1@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When switching op-modes, or more generally when reconfiguring,
we might switch the RB size. In _iwl_pcie_rx_init() we have a
comment saying we must free all RBs since we might switch the
size, but this is actually too late: the switch has been done
and we'll free the buffers with the wrong size.
Fix this by always freeing the buffers, if any, at the start
of configure, instead of only after the size may have changed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.42d7c93279c4.I07f74e65aab0e3d965a81206fcb289dc92d74878@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
On 64-bit machines, struct iwl_rx_mem_buffer has a lot of
padding due to the use of pointers after the small items.
Move the list entry before them, and while at it also add
documentation for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.6a62255b3df0.I47bb36530a3c2cdbd73454c796ce608ee2a32a6c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If the firmware crashes while we're already shutting down
the system, there isn't much we can do since the shutdown
process is continuing and we wanted to do that. Don't do
a FW restart, with the implied debug collection, in this
case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.43a7351ae6bd.I164d48ce4379accf76ea0637983fd946d52dc6f5@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
First set of patches for v5.15. This got delayed as I have been mostly
offline for the last few weeks. The biggest change is removal of
prism54 driver, otherwise just smaller changes.
Major changes:
ath5k, ath9k, ath10k, ath11k:
* switch from 'pci_' to 'dma_' API
brcmfmac
* allow per-board firmware binaries
* add support 43752 SDIO device
prism54
* remove the obsoleted driver, everyone should be using p54 driver instead
-----BEGIN PGP SIGNATURE-----
iQFJBAABCgAzFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmEiEGcVHGt2YWxvQGNv
ZGVhdXJvcmEub3JnAAoJEG4XJFUm622b0UoH+wT2LyZ92PZUxL5FwUl1kFIRKefw
8H5urbnlioiqFjKU9YAwD3bvGTrIPMGjOkR50JxPNxxKzcx5CgHz6GQmIe16aSs2
FEMV//G5dcGe7HS94kdOiBhm6EqLrr+hrqWRop+uEnu9DuQNxnS/5ZpxU6zNSK7z
S2u2m/zpcaE6/F+Po1jlGyPRzUbTR8xV/3a7LKUgbZslbrGKayn+3aQwFXZ4D8YX
OhGrsL5nbFjKP0Ys7X/QS9s31IuzMBO5IUVMyJzcY7p6pPPFspxiGaT+HqUixZ9G
eb0hStxXANDAQbhBgz2KpIGH8J/0g8WdUwUj4SuiHOrhPSga6HZ06MhJ5xk=
=djwO
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2021-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.15
First set of patches for v5.15. This got delayed as I have been mostly
offline for the last few weeks. The biggest change is removal of
prism54 driver, otherwise just smaller changes.
Major changes:
ath5k, ath9k, ath10k, ath11k:
* switch from 'pci_' to 'dma_' API
brcmfmac
* allow per-board firmware binaries
* add support 43752 SDIO device
prism54
* remove the obsoleted driver, everyone should be using p54 driver instead
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
libipw_read_qos_param_element() copies a struct libipw_info_element
into a struct libipw_qos_information_element, but is actually wanting to
copy into the larger struct libipw_qos_parameter_info (the contents of
ac_params_record[] is later examined). Refactor the routine to perform
centralized checks, and copy the entire contents directly (since the id
and len members match the elementID and length members):
struct libipw_info_element {
u8 id;
u8 len;
u8 data[];
} __packed;
struct libipw_qos_information_element {
u8 elementID;
u8 length;
u8 qui[QOS_OUI_LEN];
u8 qui_type;
u8 qui_subtype;
u8 version;
u8 ac_info;
} __packed;
struct libipw_qos_parameter_info {
struct libipw_qos_information_element info_element;
u8 reserved;
struct libipw_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
} __packed;
Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210819202825.3545692-2-keescook@chromium.org
Dynamic size calculations (especially multiplication) should not be
performed in memory allocator function arguments due to the risk of them
overflowing. This could lead to values wrapping around and a smaller
allocation being made than the caller was expecting. Using those
allocations could lead to linear overflows of heap memory and other
misbehaviors.
To avoid this scenario, use the struct_size helper.
Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210717142513.5411-1-len.baker@gmx.com
Some products (So) may have two different types of products
with different mac-type that are otherwise equivalent, and
have the same PNVM data, so the PNVM file will contain two
(or perhaps later more) HW-type TLVs. Accept the file and
use the data section that contains any matching entry.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210719140154.a6a86e903035.Ic0b1b75c45d386698859f251518e8a5144431938@changeid
* aggregation handling improvements for some drivers
* hidden AP discovery on 6 GHz and other HE 6 GHz
improvements
* minstrel improvements for no-ack frames
* deferred rate control for TXQs to improve reaction
times
* virtual time-based airtime scheduler
* along with various little cleanups/fixups
-----BEGIN PGP SIGNATURE-----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=nFvj
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2021-06-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes berg says:
====================
Lots of changes:
* aggregation handling improvements for some drivers
* hidden AP discovery on 6 GHz and other HE 6 GHz
improvements
* minstrel improvements for no-ack frames
* deferred rate control for TXQs to improve reaction
times
* virtual time-based airtime scheduler
* along with various little cleanups/fixups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen reported a warning:
drivers/net/wireless/intel/iwlwifi/fw/acpi.c:720:12: warning: 'iwl_acpi_eval_dsm_func' defined but not used [-Wunused-function]
The warning is correct and the function is not used anywhere, so let's
just remove it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 7119f02b5d ("iwlwifi: mvm: support BIOS enable/disable for 11ax in Russia")
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210624052918.4946-1-kvalo@codeaurora.org
We have mgd_prepare_tx(), but sometimes drivers may want/need
to take action when the exchange finishes, whether successfully
or not.
Add a notification to the driver on completion, i.e. call the
new method mgd_complete_tx().
To unify the two scenarios, and to add more information, make
both of them take a struct that has the duration (prepare only),
subtype (both) and success (complete only).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.5d94e78f6230.I6dc979606b6f28701b740d7aab725f7853a5a155@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sending nulldata packets is important for sw AP link probing and detecting
4-address mode links. The checks that dropped these packets were apparently
added to work around an iwlwifi firmware bug with multi-TID aggregation.
Fixes: 41cbb0f5a2 ("mac80211: add support for HE")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210619101517.90806-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Conceptually, this belongs more into the firmware utils
rather than the mvm opmode, so move the collection and
output there.
Note that this slightly changes the format of the Status
line.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210621103449.b82b60d81346.Ide3b688107f6a59c7fc7eb1d8f2002b0a5c1f2d2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This new feature allows OEMs to set a special reduced power table in a
UEFI variable, which we use to tell the firmware to change the TX
power tables.
Read the variable and store it in a dram block to pass it to the
firmware. We do this as part of the PNVM loading flow.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210621103449.259a33ba5074.I2e0bb142d2a9c412547cba89b62dd077b328fdc4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In gen3, after firmware is alive, we no longer need the
firmware and image loader images, only the context info
itself and PRPH info/scratch need to remain.
Call iwl_pcie_ctxt_info_gen3_free() appropriately in the
alive callback (iwl_trans_pcie_gen2_fw_alive()) with a new
argument indicating whether it can free everything or only
partially.
The context info and PRPH scratch are also not needed after
PNVM load, but we don't have a good hook for freeing after
that, so keep them for now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.8230d91a46c1.Ia7db71e5e6265ca87363f1481eac1bc3bbebb15c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We don't fill in phy_data.d1 in no-data RX, and thus we
pretend some data is actually filled in radiotap when it
isn't or has default (zero) values.
Fill in phy_data.d1 appropriately, and while at it also
move the info_type initialization into the initializer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.3d488885f77c.Ib97a2bc57c1e9fb98927dc6f802568db313abe3b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
After firmware alive, iwl_trans_pcie_gen2_fw_alive() is called
to free the context info. However, on gen3 that will then free
the context info with the wrong size.
Since we free this allocation later, let it stick around until
the device is stopped for now, freeing some of it earlier is a
separate change.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.afb63fb8cbc1.If4968db8e09f4ce2a1d27a6d750bca3d132d7d70@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
It's been a while that the firmware uses LONG_GROUP by default
and not LEGACY_GROUP.
Until now the firmware wrongly advertise the WOWLAN_GET_STATUS
command's version with LEGACY_GROUP, but it is now being fixed.
In order to support both firmwares, first try to get the version
number of the command with the LONG_GROUP and if the firmware
didn't advertise the command version with LONG_GROUP, try to get
the command version with LEGACY_GROUP.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.cd6f4e421430.Iec07c746c8e65bc267e4750f38e4f74f2010ca45@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
These two version updates deprecate the need to set/get the nonqos sequence
counter during suspend/resume flow respectively; NICs supporting this
version maintain this counter internally and don't lose it during the
suspend/resume flow.
Note that this means that for such NICs the NON_QOS_TX_COUNTER_CMD is no
longer ever sent.
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.dd25dd667798.I8db9adcdbb133304b58cf417f8698611138c83b4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When operating in AP mode with NICs supporting the AP_LINK_PS hw flag,
mac80211 doesn't need to start/stop queueing tx for connected stations
because the FW already handles that.
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.64df994c8fbb.I0fa5cda3a5f893a396eef30a01522422be359e69@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In case of unbinding, the FW would remove the session protection time
events without sending a notification, so explicitly cancel the
session protection, so future requests for mgd_prepare_tx() would not
assume that the session protection is running.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.7c30f85ed241.Ibc19fdbefca7135f2c4ea83d0aef6b81b5033dcd@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Read the UNII4 setting from the ACPI table and use it in the
LARI_CONFIG_CHANGE_CMD accordingly.
This setting allows OEMs to enable or disable UNII4, bypassing the FW
defaults.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617100544.223090c509c4.If03cb5393607ae494041b6187bcec134d6a1e06d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The TR/CR tail data are meant to be per-queue-arrays, however,
we allocate them completely wrong (we have a separate allocation
per queue).
Looking at this more closely, it turns out that the hardware
never uses these - we have a separate free list per RX queue
and maintain a write pointer for that in a register, and the
RX itself is indicated in the RB status (rb_stts) DMA region.
Despite nothing using the tail pointers, the hardware will
unconditionally access them to write updates, even when we aren't
using CRs/TRs.
Give it dummy values that we never use/update so it can do that
without causing trouble.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617110647.5f5764e04c46.I4d5de1929be048085767f1234a1e07b517ab6a2d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The (default) HE capabilities for our devices weren't handled
correctly, adjust them to match the correct capabilities of
the devices.
Since the device regulatory will not allow 160 MHz on 5 GHz,
don't advertise this capability by default; do it only if an
NVM file is being loaded that might change the regulatory
parameters.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617100544.e8d0b02ec86b.Ia6ef8cc0480d38af25e6ac45fad9fb15bdfcbc2c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When the session protection ends and the Driver is not
associated or a beacon was not heard, the Driver
prints "No beacons heard...".
That's confusing for the case where not associated.
Change the print when not associated to "Not associated...".
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617100544.41a5a5a894fa.I9eabb76e7a3a7f4abbed8f2ef918f1df8e825726@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The firmware can now request SMPS (due to thermal conditions), add
some code to honour such requests and bubble them up through the
stack, subject to our other SMPS constraints, e.g. from Bluetooth.
Then, if the firmware requests SMPS, then we know that it supports
a small extension to the PHY configuration API where a chain mask
of 0 means "use 1 but pick which one yourself", so in this case we
use that extension.
During firmware restart, we stay in the previous state, and the FW
will send us a notification at startup (only) if the temperature is
below the lower or above the high threshold, to sync the state.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617100544.85656b7684b9.I7a661a0758d070a750d3a91874d1a0f5fab9febc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
SMPS requests may differ per interfaces due to e.g. Bluetooth
only interfering on 2.4 GHz, so if that's the case we should,
in the case of multiple PHY contexts, still allow RX diversity
on PHY context that have no interfaces with SMPS requests.
Fix the code to pass through the PHY context in question and
skip interfaces with non-matching PHY context while iterating.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617100544.123c6b05809d.I992e3d1c6a29850d02eeec01712b5b685b963a87@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The FW has a watchdog of 200ms in the PNVM load flow, so the driver
should have a slightly higher timeout. Change the timeout from 100ms
to 250ms.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 70d3ca86b0 ("iwlwifi: mvm: ring the doorbell and wait for PNVM load completion")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.ba22aec1e2be.I36bfadc28c480f4fc57266c075a79e8ea4a6934f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
pcim_iomap_table() might return NULL, so we shouldn't unconditionally
dereference the return value by taking the [0] entry.
Handle this better by checking for NULL first, and then separately
checking if the [0] entry is NULL.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.9aa4f0e3574a.I458b283f203d5f927f00be1bfbd4b8ebf11c5ae4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When we have a P2P Device active, we attempt to only change the
PHY context it uses when we get a new remain-on-channel, if the
P2P Device is the only user of the PHY context.
This is fine if we're switching within a band, but if we're
switching bands then the switch implies a removal and re-add
of the PHY context, which isn't permitted by the firmware while
it's bound to an interface.
Fix the code to skip the unbind/release/... cycle only if the
band doesn't change (or we have old devices that can switch the
band on the fly as well.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.e9ac313f70f3.I713b9d109957df7e7d9ed0861d5377ce3f8fccd3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Read the new BIOS DSM and Pass to FW if to disable\enable
11ax for Russia according to the BIOS key. This is
needed to enable OEMs to control enable/disable 11ax in Russia.
Also add support for future "enable 11ax in country X" features.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.a705f7cedff8.I580f1021cabcc37e88f5ec5e9a6bbf00aae514b6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Kernel test robot throws below warning ->
drivers/net/wireless/intel/ipw2x00/ipw2100.c:5359: warning: This comment
starts with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
Minor update in documentation.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1619347842-6638-1-git-send-email-jrdr.linux@gmail.com
- Fix spellos in comments for the tegra and sun8i (Bhaskar Chowdhury)
- Add the missing fifth node on the rcar_gen3 sensor (Niklas
Söderlund)
- Remove duplicate include in ti-bandgap (Zhang Yunkai)
- Assign error code in the error path in the function
thermal_of_populate_bind_params() (Jia-Ju Bai)
- Fix spelling mistake in a comment 'disabed' -> 'disabled' (Colin Ian
King)
- Use the device name instead of auto-numbering for a better
identification of the cooling device (Daniel Lezcano)
- Improve a bit the division accuracy in the power allocator governor
(Jeson Gao)
- Enable the missing third sensor on msm8976 (Konrad Dybcio)
- Add QCom tsens driver co-maintainer (Thara Gopinath)
- Fix memory leak and use after free errors in the core code (Daniel
Lezcano)
- Add the MDM9607 compatible bindings (Konrad Dybcio)
- Fix trivial spello in the copyright name for Hisilicon (Hao Fang)
- Fix negative index array access when converting the frequency to
power in the energy model (Brian-sy Yang)
- Add support for Gen2 new PMIC support for Qcom SPMI (David Collins)
- Update maintainer file for CPU cooling device section (Lukasz Luba)
- Fix missing put_device on error in the Qcom tsens driver (Guangqing
Zhu)
- Add compatible DT binding for sm8350 (Robert Foss)
- Add support for the MDM9607's tsens driver (Konrad Dybcio)
- Remove duplicate error messages in thermal_mmio and the bcm2835
driver (Ruiqi Gong)
- Add the Thermal Temperature Cooling driver (Zhang Rui)
- Remove duplicate error messages in the Hisilicon sensor driver (Ye
Bin)
- Use the devm_platform_ioremap_resource_byname() function instead of
a couple of corresponding calls (dingsenjie)
- Sort the headers alphabetically in the ti-bandgap driver (Zhen Lei)
- Add missing property in the DT thermal sensor binding (Rafał
Miłecki)
- Remove dead code in the ti-bandgap sensor driver (Lin Ruizhe)
- Convert the BRCM DT bindings to the yaml schema (Rafał Miłecki)
- Replace the thermal_notify_framework() call by a call to the
thermal_zone_device_update() function. Remove the function as well
as the corresponding documentation (Thara Gopinath)
- Add support for the ipq8064-tsens sensor along with a set of
cleanups and code preparation (Ansuel Smith)
- Add a lockless __thermal_cdev_update() function to improve the
locking scheme in the core code and governors (Lukasz Luba)
- Fix multiple cooling device notification changes (Lukasz Luba)
- Remove unneeded variable initialization (Colin Ian King)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmCRqDIACgkQqDIjiipP
6E8O2Qf5AQvSVoN9WYRBLo1+a4mkGsJ/wHQMEsOA4FVHft5/QVkRtpMNbSiyq00O
YTpNuoBqiYm/tSTyzK/5Oh+0ucgm/ef4c4dTyPjZYw2GB+3rYNRAXdX/tB6Ggjl/
oUArUCoSQZjOU6Y573B05rcHp1PVM/XL9LgD1uX76tXA1MaGvsyC0cyPRAdOANke
W83BWI0XMhv8B1bZwHVB2Oft5x6HhqWBl3HKbNOmPEMtwkqqBCFAqB0wNEH88ZTf
2hyBjBoZQHdMkJsC0piMvIyAjHZiIjQB47VWz31EvKB3/E28xCqRqPViPq9QbrA5
got0+oDbxI96T024ndXRomc0SSxZnw==
=5THg
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Remove duplicate error message for the amlogic driver (Tang Bin)
- Fix spellos in comments for the tegra and sun8i (Bhaskar Chowdhury)
- Add the missing fifth node on the rcar_gen3 sensor (Niklas Söderlund)
- Remove duplicate include in ti-bandgap (Zhang Yunkai)
- Assign error code in the error path in the function
thermal_of_populate_bind_params() (Jia-Ju Bai)
- Fix spelling mistake in a comment 'disabed' -> 'disabled' (Colin Ian
King)
- Use the device name instead of auto-numbering for a better
identification of the cooling device (Daniel Lezcano)
- Improve a bit the division accuracy in the power allocator governor
(Jeson Gao)
- Enable the missing third sensor on msm8976 (Konrad Dybcio)
- Add QCom tsens driver co-maintainer (Thara Gopinath)
- Fix memory leak and use after free errors in the core code (Daniel
Lezcano)
- Add the MDM9607 compatible bindings (Konrad Dybcio)
- Fix trivial spello in the copyright name for Hisilicon (Hao Fang)
- Fix negative index array access when converting the frequency to
power in the energy model (Brian-sy Yang)
- Add support for Gen2 new PMIC support for Qcom SPMI (David Collins)
- Update maintainer file for CPU cooling device section (Lukasz Luba)
- Fix missing put_device on error in the Qcom tsens driver (Guangqing
Zhu)
- Add compatible DT binding for sm8350 (Robert Foss)
- Add support for the MDM9607's tsens driver (Konrad Dybcio)
- Remove duplicate error messages in thermal_mmio and the bcm2835
driver (Ruiqi Gong)
- Add the Thermal Temperature Cooling driver (Zhang Rui)
- Remove duplicate error messages in the Hisilicon sensor driver (Ye
Bin)
- Use the devm_platform_ioremap_resource_byname() function instead of a
couple of corresponding calls (dingsenjie)
- Sort the headers alphabetically in the ti-bandgap driver (Zhen Lei)
- Add missing property in the DT thermal sensor binding (Rafał Miłecki)
- Remove dead code in the ti-bandgap sensor driver (Lin Ruizhe)
- Convert the BRCM DT bindings to the yaml schema (Rafał Miłecki)
- Replace the thermal_notify_framework() call by a call to the
thermal_zone_device_update() function. Remove the function as well as
the corresponding documentation (Thara Gopinath)
- Add support for the ipq8064-tsens sensor along with a set of cleanups
and code preparation (Ansuel Smith)
- Add a lockless __thermal_cdev_update() function to improve the
locking scheme in the core code and governors (Lukasz Luba)
- Fix multiple cooling device notification changes (Lukasz Luba)
- Remove unneeded variable initialization (Colin Ian King)
* tag 'thermal-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (55 commits)
thermal/drivers/mtk_thermal: Remove redundant initializations of several variables
thermal/core/power allocator: Use the lockless __thermal_cdev_update() function
thermal/core/fair share: Use the lockless __thermal_cdev_update() function
thermal/core/fair share: Lock the thermal zone while looping over instances
thermal/core/power_allocator: Update once cooling devices when temp is low
thermal/core/power_allocator: Maintain the device statistics from going stale
thermal/core: Create a helper __thermal_cdev_update() without a lock
dt-bindings: thermal: tsens: Document ipq8064 bindings
thermal/drivers/tsens: Add support for ipq8064-tsens
thermal/drivers/tsens: Drop unused define for msm8960
thermal/drivers/tsens: Replace custom 8960 apis with generic apis
thermal/drivers/tsens: Fix bug in sensor enable for msm8960
thermal/drivers/tsens: Use init_common for msm8960
thermal/drivers/tsens: Add VER_0 tsens version
thermal/drivers/tsens: Convert msm8960 to reg_field
thermal/drivers/tsens: Don't hardcode sensor slope
Documentation: driver-api: thermal: Remove thermal_notify_framework from documentation
thermal/core: Remove thermal_notify_framework
iwlwifi: mvm: tt: Replace thermal_notify_framework
dt-bindings: thermal: brcm,ns-thermal: Convert to the json-schema
...
thermal_notify_framework just updates for a single trip point where as
thermal_zone_device_update does other bookkeeping like updating the
temperature of the thermal zone and setting the next trip point etc.
Replace thermal_notify_framework with thermal_zone_device_update as the
later is more thorough.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210122023406.3500424-2-thara.gopinath@linaro.org
* set sk_pacing_shift for 802.3->802.11 encap offload
* some monitor support for 802.11->802.3 decap offload
* HE (802.11ax) spec updates
* userspace API for TDLS HE support
* along with various other small features, cleanups and
fixups
-----BEGIN PGP SIGNATURE-----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=b0NQ
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2021-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Another set of updates, all over the map:
* set sk_pacing_shift for 802.3->802.11 encap offload
* some monitor support for 802.11->802.3 decap offload
* HE (802.11ax) spec updates
* userspace API for TDLS HE support
* along with various other small features, cleanups and
fixups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Analogically to what we did in 2800aadc18 ("iwlwifi: Fix softirq/hardirq
disabling in iwl_pcie_enqueue_hcmd()"), we must apply the same fix to
iwl_pcie_gen2_enqueue_hcmd(), as it's being called from exactly the same
contexts.
Reported-by: Heiner Kallweit <hkallweit1@gmail.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2104171112390.18270@cbobk.fhfr.pm
After the fix from Jiri that disabled local IRQs instead of
just BHs (necessary to fix an issue with submitting a command
with IRQs already disabled), there was still a situation in
which we could deep in there enable BHs, if the device config
sets the apmg_wake_up_wa configuration, which is true on all
7000 series devices.
To fix that, but not require reverting commit 1ed08f6fb5
("iwlwifi: remove flags argument for nic_access"), split up
nic access into a version with BH manipulation to use most
of the time, and without it for this specific case where the
local IRQs are already disabled.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210415164821.d0f2edda1651.I75f762e0bed38914d1300ea198b86dd449b4b206@changeid
The "ext->key_len" is a u16 that comes from the user. If it's over
SCM_KEY_LEN (32) that could lead to memory corruption.
Fixes: e0d369d1d9 ("[PATCH] ieee82011: Added WE-18 support to default wireless extension handler")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YHaoA1i+8uT4ir4h@mwanda
Yoyo based debug is not applicable to old devices. As init debug is
enabled by default in the driver, it needs to be disabled to work the
old debug mechanism in old devices.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Fixes: b0d8d2c270 ("iwlwifi: yoyo: enable yoyo by default")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411132130.805401a1b8ec.I30db38184a418cfc1c5ca1a305cc14a52501d415@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In a few PCIe devices we may have to swap out the configuration
after we allocate/initialise some parts of the device because
we only know the correct one after reading some registers. This
causes some things such as the byte-count table allocations to
be incorrect, since the configuration is swapped for one with a
bigger queue size.
Fix this by initialising most of the transport much later, only
after the configuration has finally been determined.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411132130.8f5db97db1e4.Ic622da559b586a04ca536a0ec49ed5ecf03a9354@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
It is not very useful to WARN if we can't send a host command
The firmware is likely in a bad situation and the fact that
we didn't send the host command has an impact on the firmware
only, not on the driver. The driver could clean up all its
state.
Don't WARN in this case, but just leave a smaller note.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411132130.0324abc169c8.I4f9b769bc38d68f8ed43f77d2cd75e8f1993e964@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When we switch channel, we may miss a few beacons on the
new channel. Don't disconnect if the time event for the
switch ends before we hear the beacons.
Note that this is relevant only for old devices that still
use the TIME_EVENT firmware API for channel switch.
The check that we hear a beacon before the time event
ends was meant to be used for the association time event
and not for the channel switch time event.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411132130.3d710091a0bd.I37a161ffdfb099a10080fbdc3b70a4deb76952e2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The only difference between iwl_pcie_napi_poll_msix_shared() and
iwl_pcie_napi_poll_msix() is when we have a shared queue and nothing
in the rx queue. This case doesn't affect CPU performance, so we can
merge the two functions.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411124417.9d1b61ef53a5.I60b33d5379cf7c12f1de30fc3fd4cefc38220141@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We cannot lock a mutex while we're in an RCU critical section. At
the same time, we're accessing data structures that are protected
by the mvm->mutex anyway, so just move the entire locking here to
use only that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411124417.4d27bd36e10e.I1fd8e8fe442c41a5deaa560452b598ed7a60ada5@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Power save (PS) should only be enabled when we reach the max phy rate.
Before we reach it (MCS_9) for VHT, we should keep trying to improve the
throughput.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411124417.2a2fb9f9c25e.I7c7bbcfbdc1d35d2c3338778fb397dd5b08ea0e8@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
umac_error_table In TLV address was read using mask on MSB
but on the same table in alive message it was without which
caused mismatch in devices with different memory region MSB
Signed-off-by: Roee Goldfiner <roee.h.goldfiner@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411124417.179fee442115.Ib6eabe86cfda0b6044f07c07448c366b6e07e53d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In case the device is stopped any usage of hw queues needs to be
reallocated in fw due to fw reset after device stop, so all driver
internal queue should also be freed, and if we don't free the next usage
would leak the old memory and get in recover flows
"iwlwifi 0000:00:03.0: dma_pool_destroy iwlwifi:bc" warning.
Also warn about trying to reuse an internal allocated queue.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411124417.c72d2f0355c4.Ia3baff633b9b9109f88ab379ef0303aa152c16bf@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If the firmware is dead, the Tx queues won't drain, but
leaving a print in the log is enough, no need to WARN.
If the firmware is dead, we must already have printed enough
information in the log anyway.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411124417.9a438b2320a9.I4aa897178df82acefd80173d76dd6849ad1bcdc1@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Debug message "firmware didn't ACK the reset - continue anyway\n"
in fw_reset_handshake() is classified as error, however this is not
an error as it is ignored. So, change it to info message for proper
classification of debug messages.
Signed-off-by: Ravi Darsi <ravi.darsi@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.449b3092c330.I515edcc41913ca7fbe4a4de923671d120d5618c6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Instead of implementing the DSM evaluation function in the MVM code,
refactor it so it can be generalized and part of the common ACPI
implementation.
Signed-off-by: Harish Mitty <harish.mitty@intel.com>
[reworded subject and commit message]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.a24af3551aac.I8e6bd5eb05f853b6331fa4823750f7ba8ffe46e6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Read the new BIOS DSM and Pass to FW if to disable\enable
11ax for Ukraine according to the BIOS key. this is
needed to enable OEMs to control enable/disable 11ax in Ukraine
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.055654e7707e.If7eaf9839cd5d59729a235df07e31668b408e740@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Add support for ppag in China by reading revision 2 of the ppag table
from ACPI, and passing the data to the FW.
This is needed to enable OEMs to control ppag enablement
in China.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.69af388d0dce.I8cfddf9e6837bf394b00390181b4b774ded19acd@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When doing scan while 6GHz channels are not enabled, the 6GHz band
is not scanned. Thus, if there are no APs on the 2GHz and 5GHz bands
(that will allow discovery of geographic location etc. that would
allow enabling the 6GHz channels) but there are non collocated APs
on 6GHz PSC channels these would never be discovered.
To overcome this, FW added support for performing passive UHB scan
in case no APs were discovered during scan on the 2GHz and 5GHz
channels.
Add support for enabling such scan when the following conditions are
met:
- 6GHz channels are supported but not enabled by regulatory.
- Station interface is not associated or less than a defined time
interval passed from the last resume or HW reset flows.
- At least 4 channels are included in the scan request
- The scan request includes the widlcard SSID.
- At least 50 minutes passed from the last 6GHz passive scan.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.7c7bd00e0aeb.Ib226ad57e416b43a710c36a78a617d4243458b99@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When we do queue sync, it's confusing that we have the structures
declared in the FW API header files that aren't really firmware,
and the union is also confusing - especially now in the code that
checks the size on the return.
So rework this: change the type of sync and whether to do it in a
synchronous fashion to arguments, and build the data structure in
the function, so we don't need the union.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.f62833fd9893.I612d7ac1c655ec4880329360e15d207698c750bc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We use mvm->queue_sync_state to wait for synchronous queue sync
messages, but if an async one happens inbetween we shouldn't
clear mvm->queue_sync_state after sending the async one, that
can run concurrently (at least from the CPU POV) with another
synchronous queue sync.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.d11c9bcdb4aa.I0772171dbaec87433a11513e9586d98b5d920b5f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If we (for example) have a trans_cfg entry in the PCI IDs table,
but then don't find a full cfg entry for it in the info table,
we fall through to the code that treats the PCI ID table entry
as a full cfg entry. This obviously causes crashes later, e.g.
when trying to build the firmware name string.
Avoid such crashes by using the low bit of the pointer as a tag
for trans_cfg entries (automatically using a macro that checks
the type when assigning) and then checking that before trying to
use the data as a full entry - if it's just a partial entry at
that point, fail.
Since we're adding some macro magic, also check that the type is
in fact either struct iwl_cfg_trans_params or struct iwl_cfg,
failing compilation ("initializer element is not constant") if
it isn't.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.6f69fe6e4128.I921d4ae20ef5276716baeeeda0b001cf25b9b968@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
For simplicity we assume that msix has 2 IRQ lines one used for rx data
called msix_non_share, and another used for one bit flags messages
(alive, hw error, sw error, rx data flag) called msix_share.
Every time the FW has data to send it puts it on the RX queue and HW
turns on the flags in msix_share (inta_fw) indicating about rx data,
and HW sends an interrupt a bit later to the msix_non_share _unless_
the msix_shared RX data bit was cleared.
Currently in the code every time we get an msix_shared we clear all bits
including rx data queue bits.
So we can have a race
----------------------------------------------------
DRIVER | HW | FW
----------------------------------------------------
- send host cmd to FW | |
| | - handle message
| | and put a response
| | on the RX queue
| - RX flag on |
| | - send alive msix
| - alive flag on |
| - interrupt |
| msix_share driver |
- handle msix_shared | |
and clear all flags | |
bits | |
| - don't send an |
| interrupt on |
| msix_non_shared |
| (driver cleared) |
- driver timeout on | |
waiting for host cmd | |
respond | |
| |
----------------------------------------------------
The change is to clear only the msi_shared flags that are handled in
the msix_shared flow, which will cause the hardware to send an interrupt
on the msix_non_share line as well, when it has data.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.a1cdda2fa270.I02a82312679f4541f30bb8db8747a797dbb70ee7@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Add support for different combinations of Bz
and CRFs.
Note: As of now we do not know the exact values
for ltr_delay and xtal_latency, so for now use the
worst case scenario values until the actual values
are clarified.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.caac8d996532.I6a22d6decb106cd50d7954b19236b69d685dcc39@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
"Fully associated" means that we heard a beacon with the DTIM
information and the firmware is configured to track the beacons.
Since the firmware needs to track the beacons for the CSA, we
can't configure the firmware for CSA before it knows when the
beacons are expected otherwise we'd get ASSERT 301D.
If we are required to start CSA before we told the firmware
when the beacons are expected to arrive, just report a
failure and let mac80211 disconnect.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.9adaedeb59e4.Idaad6aaf3f9759d023b8e00b10064915c0db9aa3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We currently have a special, separate, code path to acquire NIC
access for the in-flight host-command workaround on 7000 series
hardware. However, the normal code path here has grown a number
of additional workarounds/semantics over time, such as reprobing
the device if things fail.
Rather than try to replicate any of this logic, call the normal
grab_nic_access logic for the workaround.
This changes the spinlock to _bh, but that's OK since it's just
redundant, we already have soft-IRQs disabled when we get here,
and so didn't (have to) do it again. Since it's only for commands
there's however no point in making the code more complex just to
not use _bh here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.d196fc6ffb23.Idc1ce3ce9fed9178beee7e5409bc669f79b06a0d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Most devices don't set the apmg_wake_up_wa flag, so we don't do
anything for them. Avoid taking the spinlock for every command
unless the device needs this workaround.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.1ab60af3f318.I51cc202f68a2a953223e70c3e8610343412961b6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When moving to the new channel, we block TX until we hear the
first beacon. if it is not heard, we proceed to disconnect.
Since TX is blocked (without mac80211 being aware of it) the frame
is stuck, resulting with queue hang.
Instead, reenable TX before reporting on the connection loss.
As we are on the new channel, there is no problem with that,
even if the original CSA had quiet mode.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.eb4f2ff1b863.Ib16238106b33d58b2b7688dc6297018b915ecef4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
First set of patches for v5.13. I have been offline for a couple of
and I have a smaller pull request this time. The next one will be
bigger. Nothing really special standing out.
ath11k
* add initial support for QCN9074, but not enabled yet due to firmware problems
* enable radar detection for 160MHz secondary segment
* handle beacon misses in station mode
rtw88
* 8822c: support firmware crash dump
mt7601u
* enable TDLS support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJgdSxyAAoJEG4XJFUm622bSIcH/1YFegVfAXx8YJmNUFaPbtka
EZtG7t+5Dqv+hfO3fLvd0fq7Qbdcc0lodoCEBjyu6U0ylDydN+jtmwnwUexkfHQa
Q1nl5Mc5JOpmQdiWG20VsQAKAedxYKck3LIESz9S3TmlGYn+V/nzse3WLpOWSvSR
GVb2KZyd7s1h112Kh6zwEHfMw5h9yMq6+mR/lUU81inpCeMZQDZjXOvZ+ullyL/H
avKftAwcmCmPVoz8n7H0xJgwDCf81nuriSUeu0H5xqTHL/tbGjHUCOS9N7xv0J6a
9DiepfSOEXXUMpO8n4NQ1tVULDxut+fo8EZ6ocGAY2JT5F+6YUOcv3ouVc/26Yg=
=6jDY
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2021-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.13
First set of patches for v5.13. I have been offline for a couple of
and I have a smaller pull request this time. The next one will be
bigger. Nothing really special standing out.
ath11k
* add initial support for QCN9074, but not enabled yet due to firmware problems
* enable radar detection for 160MHz secondary segment
* handle beacon misses in station mode
rtw88
* 8822c: support firmware crash dump
mt7601u
* enable TDLS support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a couple of warnings in this driver when building with W=1:
drivers/net/wireless/intel/iwlegacy/common.c: In function 'il_power_set_mode':
drivers/net/wireless/intel/iwlegacy/common.c:1195:60: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
1195 | il->chain_noise_data.state);
| ^
drivers/net/wireless/intel/iwlegacy/common.c: In function 'il_do_scan_abort':
drivers/net/wireless/intel/iwlegacy/common.c:1343:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
Change the empty debug macros to no_printk(), which avoids the
warnings and adds useful format string checks.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210322104343.948660-3-arnd@kernel.org
Unfortunately, since beacon protection isn't fully available
yet, we didn't notice that there are problems with it and
that the replay detection isn't working correctly. We were
relying only on mac80211, since iwl_mvm_rx_crypto() exits
when !ieee80211_has_protected(), which is of course true for
protected (but not encrypted) management frames.
Fix this to properly detect protected (but not encrypted)
management frames and handle them - we continue to only care
about beacons since for others everything can and will be
checked in mac80211.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: b1fdc2505a ("iwlwifi: mvm: advertise BIGTK client support if available")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.23c990843369.I09c262a8f6f9852cc8f513cdcb31a7f8f87dd8af@changeid
Since we now call iwl_notification_wait_notify() from the
NAPI poll in soft-IRQ, we get a (valid) lockdep complaint
that we could get a deadlock by taking the spinlock from
sleeping context and then getting the soft-IRQ that also
tries to take it (in NAPI polling).
Fix this by disabling soft-IRQs for this lock.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 25edc8f259 ("iwlwifi: pcie: properly implement NAPI")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.c3b2e3d6b58b.Ic56f351d04674df70567bab0269cba91bdbc853c@changeid
As the context info gen3 code is only called for >=AX210 devices
(from iwl_trans_pcie_gen2_start_fw()) the code there to set LTR
on 22000 devices cannot actually do anything (22000 < AX210).
Fix this by moving the LTR code to iwl_trans_pcie_gen2_start_fw()
where it can handle both devices. This then requires that we kick
the firmware only after that rather than doing it from the context
info code.
Note that this again had a dead branch in gen3 code, which I've
removed here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: ed0022da8b ("iwlwifi: pcie: set LTR on more devices")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.675486178ed1.Ib61463aba6920645059e366dcdca4c4c77f0ff58@changeid
When version 2 of the regulatory capability flags API was implemented,
the flag to disable 11ax was defined as bit 13, but this was later
changed and the bit remained as bit 10, like in version 1. This was
never changed in the driver, so we were checking for the wrong bit in
newer devices. Fix it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: e27c506a98 ("iwlwifi: regulatory: regulatory capabilities api change")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.6d28516b59cd.Id0248d5e4662695254f49ce37b0268834ed52918@changeid
Second set of fixes for v5.12. Only three iwlwifi fixes this time, the
crash with MVM being the most important one and reported by multiple
people.
iwlwifi
* fix kernel crash regression when using LTO with MVM devices
* fix printk format warnings
* fix potential deadlock found by lockdep
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJgP8G0AAoJEG4XJFUm622b1ZoH/1wSyEwQB90iYlZO4w1pR2yD
HHHJjQQE8JCkOOoMNTHLkCfFWc76c/e6BL3+U9DsbvJGuPccUAIiiUQUonrEMph/
QmNBDd7OB/yIYpmkIpciKpaKAg2Vg4qF2owq8xRDpnD5NosTfCUiacvkuMRB4Wzl
NuGBEECNw6Dq/l/vYVe2pgTQ+rYxCGrvpU7GsYAa5vOsSxzS+4RhMc4gFV5Ae9rK
RNWT4StB7wi8sLjhdEYR2hldyS2OSPnrFNhfJggHw6d/4aXPlmBe7tnd3D1P3kwF
+9FlqjA5U5bcT+3DC2ucFlGtwrfumxi+ro5j8Va19O2/eTLturCIK26A2C+BtTQ=
=cOCt
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-2021-03-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.12
Second set of fixes for v5.12. Only three iwlwifi fixes this time, the
crash with MVM being the most important one and reported by multiple
people.
iwlwifi
* fix kernel crash regression when using LTO with MVM devices
* fix printk format warnings
* fix potential deadlock found by lockdep
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
An unsigned long variable should rely on '%lu' format strings, not '%zd'
Fixes: a1a6a4cf49 ("iwlwifi: pnvm: implement reading PNVM from UEFI")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210302011640.1276636-1-pierre-louis.bossart@linux.intel.com
