mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2025-11-23 05:42:14 +00:00
f1f73651a0
2225 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
691806e977 |
Thermal control updates for 6.2-rc1
- Fix race conditions related to thermal device operations that are not
protected against thermal device removal (Guenter Roeck).
- Fix error code in __thermal_cooling_device_register() (Dan Carpenter).
- Validate new cooling device state (coming from user space) in
cur_state_store() and reuse the max_state value from cooling device
structure in the sysfs interface (Viresh Kumar).
- Fix some possible name leaks in error paths in the thermal control
core code (Yang Yingliang).
- Detect TCC lock bit set in the intel_tcc_cooling driver and make it
refuse to update the TCC offset in that case (Zhang Rui).
- Add TCC cooling support for RaptorLake-S (Zhang Rui).
- Prevent accidental clearing of HFI status by one of the other
drivers using the same status register (Srinivas Pandruvada).
- Protect clearing of thermal status bits in Intel thermal control
drivers (Srinivas Pandruvada).
- Allow the HFI thermal control driver to ACK an HFI event for the
previously observed timestamp (Srinivas Pandruvada).
- Remove a pointless die_id check from the HFI thermal driver and
adjust the definition a data structure used by it (Ricardo Neri).
-----BEGIN PGP SIGNATURE-----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=ZdzX
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These include thermal core fixes to protect thermal device operations
against thermal device removal, other thermal core fixes and updates
of Intel thermal control drivers.
Specifics:
- Fix race conditions related to thermal device operations that are
not protected against thermal device removal (Guenter Roeck)
- Fix error code in __thermal_cooling_device_register() (Dan
Carpenter)
- Validate new cooling device state (coming from user space) in
cur_state_store() and reuse the max_state value from cooling device
structure in the sysfs interface (Viresh Kumar)
- Fix some possible name leaks in error paths in the thermal control
core code (Yang Yingliang)
- Detect TCC lock bit set in the intel_tcc_cooling driver and make it
refuse to update the TCC offset in that case (Zhang Rui)
- Add TCC cooling support for RaptorLake-S (Zhang Rui)
- Prevent accidental clearing of HFI status by one of the other
drivers using the same status register (Srinivas Pandruvada)
- Protect clearing of thermal status bits in Intel thermal control
drivers (Srinivas Pandruvada)
- Allow the HFI thermal control driver to ACK an HFI event for the
previously observed timestamp (Srinivas Pandruvada)
- Remove a pointless die_id check from the HFI thermal driver and
adjust the definition a data structure used by it (Ricardo Neri)"
* tag 'thermal-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: hfi: Remove a pointless die_id check
thermal: core: fix some possible name leaks in error paths
thermal: intel: hfi: ACK HFI for the same timestamp
thermal: intel: Protect clearing of thermal status bits
thermal: intel: Prevent accidental clearing of HFI status
thermal/core: Protect thermal device operations against thermal device removal
thermal/core: Remove thermal_zone_set_trips()
thermal/core: Protect sysfs accesses to thermal operations with thermal zone mutex
thermal/core: Protect hwmon accesses to thermal operations with thermal zone mutex
thermal/core: Introduce locked version of thermal_zone_device_update
thermal/core: Move parameter validation from __thermal_zone_get_temp to thermal_zone_get_temp
thermal/core: Ensure that thermal device is registered in thermal_zone_get_temp
thermal/core: Delete device under thermal device zone lock
thermal/core: Destroy thermal zone device mutex in release function
thermal: intel: intel_tcc_cooling: Add TCC cooling support for RaptorLake-S
thermal: intel: intel_tcc_cooling: Detect TCC lock bit
thermal: intel: hfi: Improve the type of hfi_features::nr_table_pages
thermal/core: fix error code in __thermal_cooling_device_register()
thermal: sysfs: Reuse cdev->max_state
thermal: Validate new state in cur_state_store()
|
||
|
Linus Torvalds
|
456ed864fd |
ACPI updates for 6.2-rc1
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
* Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki).
* Add support for loong_arch-specific APICs in MADT (Huacai Chen).
* Add support for fixed PCIe wake event (Huacai Chen).
* Add EBDA pointer sanity checks (Vit Kabele).
* Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
* Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
* Add a couple of new UUIDs to the known UUID list (Bob Moore).
* Add support for FFH Opregion special context data (Sudeep Holla).
* Improve warning message for "invalid ACPI name" (Bob Moore).
* Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield).
* Prepare IORT support for revision E.e (Robin Murphy).
* Finish support for the CDAT table (Bob Moore).
* Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki).
* Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao).
* Update the version of the ACPICA code in the kernel (Bob Moore).
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König).
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel).
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu).
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede).
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf).
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang ShaoBo).
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen).
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo).
- Fix the PCC mailbox handling error code path (Huisong Li).
- Avoid using PCC Opregions if there is no platform interrupt allocated
for this purpose (Huisong Li).
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen).
- Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng
Wang).
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang).
- Do not disable PNP devices on suspend when they cannot be re-enabled
on resume (Hans de Goede).
- Clean up the ACPI thermal driver a bit (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=GVzp
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and PNP updates from Rafael Wysocki:
"These include new code (for instance, support for the FFH address
space type and support for new firmware data structures in ACPICA),
some new quirks (mostly related to backlight handling and I2C
enumeration), a number of fixes and a fair amount of cleanups all
over.
Specifics:
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
- Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki)
- Add support for loong_arch-specific APICs in MADT (Huacai Chen)
- Add support for fixed PCIe wake event (Huacai Chen)
- Add EBDA pointer sanity checks (Vit Kabele)
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele)
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan)
- Add a couple of new UUIDs to the known UUID list (Bob Moore)
- Add support for FFH Opregion special context data (Sudeep
Holla)
- Improve warning message for "invalid ACPI name" (Bob Moore)
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield)
- Prepare IORT support for revision E.e (Robin Murphy)
- Finish support for the CDAT table (Bob Moore)
- Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki)
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao)
- Update the version of the ACPICA code in the kernel (Bob Moore)
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti)
- Change the return type of the ACPI driver remove callback to void
and update its users accordingly (Dawei Li)
- Add general support for FFH address space type and implement the
low- level part of it for ARM64 (Sudeep Holla)
- Fix stale comments in the ACPI tables parsing code and make it
print more messages related to MADT (Hanjun Guo, Huacai Chen)
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe
JAILLET, Xu Panda)
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen)
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla)
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li
Zhong, Colin Ian King, Sudeep Holla)
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi)
- Add some mew ACPI backlight handling quirks and update some
existing ones (Hans de Goede)
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede)
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König)
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel)
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay
Lu)
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede)
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf)
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang
ShaoBo)
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen)
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo)
- Fix the PCC mailbox handling error code path (Huisong Li)
- Avoid using PCC Opregions if there is no platform interrupt
allocated for this purpose (Huisong Li)
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen)
- Fix some kernel-doc issues in the ACPI GSI processing code
(Xiongfeng Wang)
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang)
- Do not disable PNP devices on suspend when they cannot be
re-enabled on resume (Hans de Goede)
- Clean up the ACPI thermal driver a bit (Rafael Wysocki)"
* tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: thermal: Adjust critical.flags.valid check
ACPI: fan: Convert to use sysfs_emit_at() API
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPI: battery: Call power_supply_changed() when adding hooks
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
ACPI: APEI: Remove a useless include
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: PM: Silence missing prototype warning
...
|
||
|
Rafael J. Wysocki
|
75b15aa0d8 |
Merge branch 'thermal-intel'
Merge one more Intel thermal control change for 6.2-rc1: - Remove a pointless die_id chec from the Intel HFI thermal control driver (Ricardo Neri). * thermal-intel: thermal: intel: hfi: Remove a pointless die_id check |
||
|
Ricardo Neri
|
3a3073b69c |
thermal: intel: hfi: Remove a pointless die_id check
die_id is an u16 quantity. On single-die systems the default value of die_id is 0. No need to check for negative values. Plus, removing this check makes Coverity happy. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
7d4b19ab6b |
Merge Intel thermal control drivers changes for v6.2
- Add Raptor Lake-S support to the intel_tcc_cooling driver (Zhang Rui). - Make the intel_tcc_cooling driver detect TCC locking (Zhang Rui). - Address Coverity warning in intel_hfi_process_event() (Ricardo Neri). - Prevent accidental clearing of HFI in the package thermal interrupt status (Srinivas Pandruvada). - Protect the clearing of status bits in MSR_IA32_PACKAGE_THERM_STATUS and MSR_IA32_THERM_STATUS (Srinivas Pandruvada). - Allow the HFI interrupt handler to ACK an event for the same timestamp (Srinivas Pandruvada). * thermal-intel: thermal: intel: hfi: ACK HFI for the same timestamp thermal: intel: Protect clearing of thermal status bits thermal: intel: Prevent accidental clearing of HFI status thermal: intel: intel_tcc_cooling: Add TCC cooling support for RaptorLake-S thermal: intel: intel_tcc_cooling: Detect TCC lock bit thermal: intel: hfi: Improve the type of hfi_features::nr_table_pages |
||
|
Yang Yingliang
|
4748f9687c |
thermal: core: fix some possible name leaks in error paths
In some error paths before device_register(), the names allocated
by dev_set_name() are not freed. Move dev_set_name() front to
device_register(), so the name can be freed while calling
put_device().
Fixes:
|
||
|
Srinivas Pandruvada
|
c0e3acdcde |
thermal: intel: hfi: ACK HFI for the same timestamp
Some processors issue more than one HFI interrupt with the same
timestamp. Each interrupt must be acknowledged to let the hardware issue
new HFI interrupts. But this can't be done without some additional flow
modification in the existing interrupt handling.
For background, the HFI interrupt is a package level thermal interrupt
delivered via a LVT. This LVT is common for both the CPU and package
level interrupts. Hence, all CPUs receive the HFI interrupts. But only
one CPU should process interrupt and others simply exit by issuing EOI
to LAPIC.
The current HFI interrupt processing flow:
1. Receive Thermal interrupt
2. Check if there is an active HFI status in MSR_IA32_THERM_STATUS
3. Try and get spinlock, one CPU will enter spinlock and others
will simply return from here to issue EOI.
(Let's assume CPU 4 is processing interrupt)
4. Check the stored time-stamp from the HFI memory time-stamp
5. if same
6. ignore interrupt, unlock and return
7. Copy the HFI message to local buffer
8. unlock spinlock
9. ACK HFI interrupt
10. Queue the message for processing in a work-queue
It is tempting to simply acknowledge all the interrupts even if they
have the same timestamp. This may cause some interrupts to not be
processed.
Let's say CPU5 is slightly late and reaches step 4 while CPU4 is
between steps 8 and 9.
Currently we simply ignore interrupts with the same timestamp. No
issue here for CPU5. When CPU4 acknowledges the interrupt, the next
HFI interrupt can be delivered.
If we acknowledge interrupts with the same timestamp (at step 6), there
is a race condition. Under the same scenario, CPU 5 will acknowledge
the HFI interrupt. This lets hardware generate another HFI interrupt,
before CPU 4 start executing step 9. Once CPU 4 complete step 9, it
will acknowledge the newly arrived HFI interrupt, without actually
processing it.
Acknowledge the interrupt when holding the spinlock. This avoids
contention of the interrupt acknowledgment.
Updated flow:
1. Receive HFI Thermal interrupt
2. Check if there is an active HFI status in MSR_IA32_THERM_STATUS
3. Try and get spin-lock
Let's assume CPU 4 is processing interrupt
4.1 Read MSR_IA32_PACKAGE_THERM_STATUS and check HFI status bit
4.2 If hfi status is 0
4.3 unlock spinlock
4.4 return
4.5 Check the stored time-stamp from the HFI memory time-stamp
5. if same
6.1 ACK HFI Interrupt,
6.2 unlock spinlock
6.3 return
7. Copy the HFI message to local buffer
8. ACK HFI interrupt
9. unlock spinlock
10. Queue the message for processing in a work-queue
To avoid taking the lock unnecessarily, intel_hfi_process_event() checks
the status of the HFI interrupt before taking the lock. If CPU5 is late,
when it starts processing the interrupt there are two scenarios:
a) CPU4 acknowledged the HFI interrupt before CPU5 read
MSR_IA32_THERM_STATUS. CPU5 exits.
b) CPU5 reads MSR_IA32_THERM_STATUS before CPU4 has acknowledged the
interrupt. CPU5 will take the lock if CPU4 has released it. It then
re-reads MSR_IA32_THERM_STATUS. If there is not a new interrupt,
the HFI status bit is clear and CPU5 exits. If a new HFI interrupt
was generated it will find that the status bit is set and it will
continue to process the interrupt. In this case even if timestamp
is not changed, the ACK can be issued as this is a new interrupt.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Tested-by: Arshad, Adeel<adeel.arshad@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
Srinivas Pandruvada
|
930d06bf07 |
thermal: intel: Protect clearing of thermal status bits
The clearing of the package thermal status is done by Read-Modify-Write operation. This may result in clearing of some new status bits which are being or about to be processed. For example, while clearing of HFI status, after read of thermal status register, a new thermal status bit is set by the hardware. But during write back, the newly generated status bit will be set to 0 or cleared. So, it is not safe to do read-modify-write. Since thermal status Read-Write bits can be set to only 0 not 1, it is safe to set all other bits to 1 which are not getting cleared. Create a common interface for clearing package thermal status bits. Use this interface to replace existing code to clear thermal package status bits. It is safe to call from different CPUs without protection as there is no read-modify-write. Also wrmsrl results in just single instruction. For example while CPU 0 and CPU 3 are clearing bit 1 and 3 respectively. If CPU 3 wins the race, it will write 0x4000aa2, then CPU 1 will write 0x4000aa8. The bits which are not part of clear are set to 1. The default mask for bits, which can be written here is 0x4000aaa. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Srinivas Pandruvada
|
6fe1e64b60 |
thermal: intel: Prevent accidental clearing of HFI status
When there is a package thermal interrupt with PROCHOT log, it will be processed and cleared. It is possible that there is an active HFI event status, which is about to get processed or getting processed. While clearing PROCHOT log bit, it will also clear HFI status bit. This means that hardware is free to update HFI memory. When clearing a package thermal interrupt, some processors will generate a "general protection fault" when any of the read only bit is set to 1. The driver maintains a mask of all read-write bits which can be set. This mask doesn't include HFI status bit. This bit will also be cleared, as it will be assumed read-only bit. So, add HFI status bit 26 to the mask. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Dawei Li
|
6c0eb5ba35 |
ACPI: make remove callback of ACPI driver void
For bus-based driver, device removal is implemented as:
1 device_remove()->
2 bus->remove()->
3 driver->remove()
Driver core needs no inform from callee(bus driver) about the
result of remove callback. In that case, commit
|
||
|
Arnd Bergmann
|
a6eeafba11 |
firmware: tegra: Changes for v6.2-rc1
This adds new BPMP ABI so that newer features can be enabled. Furthermore, the BPMP driver is updated to use iosys-map helpers to allow working with shared memory regions that are located in system memory. Apart from that, several minor cleanups are included. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmN7rlETHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoaT0EACUyPn96EovNyLMY9Ay/EgJbCtBB7MG k1ow5NoM3ZU8LXQLwtmqQcNrBxi9edQDU40vZqzoLrhWuTIQbVdu9F+rb6oYMnC4 4POrbXKtuuFz9lr+k8xYs/M44qFQsFosvH/yr64GL9/l2yQCrKd8UP8xkxlwcE9N K4a8Lum+aNM6UwAoDvFiY97PkYf3SHgfpFbZ1teWARTnpOGaC3zpUPqOIREL7f08 SezHFK5+qmMI6D+VtsG9EETjYYeHpstmEW5j2tM3HI/noAlfY7JEBffoaptWmJ02 7A4OkWS7vbR/m69JQcpVEj5oFDUQAYMYbdEfNR/FMPPL+nAviC2yiNjWzvELgqfJ xyrtK0GqXIGOS8bQbb+nlXK+T+RiaRMFFHFp6DVKKx06QHLNYHefoRR94AjUGwyu So4POKimX0VLgMZi2votP4gQH3WKgqTsvtk+Spwq4XLH+Id5wRhg6miEInpaid/L mwoVqr4cW2ECeH5RzadtR0mR1bgL0uweXBXQFLw5Hp6MnGhD3LwNUNz/NlL5sO11 q67df3K3zccatPniOQza/WV7uul0rC+EZl9zeexSGEMlUjVHv77/99e7vDfRWe12 NNBbQxL8SmlFXriYEdWv+ZuI43tXkuk9OaSx0A1WjA4XZFwn2/3JGz9owPCDdGII SyUKFp9olvkMYg== =e9FJ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmN9O8AACgkQmmx57+YA GNl+hRAAlwOn0/70DAtKWh49vg03JDm/fe4HYPBRNRz3z20+3qMMaINB2nCKLDhy 1+uiafbkhW6Wl/NTA+RCFbHno3ztFjHxMvUyOa/PmN3FWz1hIGR/EQk8aRVY3Jsu y+Qf2+UhsyUVJYjU0S2Mz4kdbE2hGPAmVG05MCQ1CQhLk2nIoofLqqPfKOAHqppu KqCxMzsJmPjC/6FUtM6+o7AC1wnNMO9qOR152hoPe2d8yVdydta339sDxUBKH6fE HeodQNnvNmK3M1FQf9q7Mqa1ltyyTZZKB3MMWulZFPGnnZF8u8b2jslxNQaQ+pfb G61V9KvX7sLV8mw+lXPP+lquP85IwOOajhoCGF/Pa8nofjL5vfJE4lH4spuUkFTa nWKlVhXMnpAyzQ1K7qSeA+UycZwXGAUriwVJeSyB9jrg5bBzbtaNXQ+KoB/yV2Vn sQoH4Aspm52ePLggZUnDOZTuq6NUC4HZOyApPRQgPoSGiMkFwS6ic4ae0gGDXdyT ShHkAjF2wDOcL0fxpS5Y1lRtNI9NBFAeuETrjE1QQfT6MnTjLRpWnTsylIu01lTz 1Eh4x8cOwOiYuYD52ozbnZ0F3roUbbvIm67/zgF/Up9h8qwCyIUZ1rkHQDMruBrx c91zgDxoqrEfp7Mbdu/wFWnQYhfSD6g9spBixbtflmCnMblerog= =yh95 -----END PGP SIGNATURE----- Merge tag 'tegra-for-6.2-firmware-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers firmware: tegra: Changes for v6.2-rc1 This adds new BPMP ABI so that newer features can be enabled. Furthermore, the BPMP driver is updated to use iosys-map helpers to allow working with shared memory regions that are located in system memory. Apart from that, several minor cleanups are included. * tag 'tegra-for-6.2-firmware-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: firmware: tegra: Remove surplus dev_err() when using platform_get_irq_byname() firmware: tegra: Update BPMP ABI firmware: tegra: bpmp: Do not support big-endian firmware: tegra: bpmp: Use iosys-map helpers firmware: tegra: bpmp: Prefer u32 over uint32_t Link: https://lore.kernel.org/r/20221121171239.2041835-2-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Guenter Roeck
|
b778b4d782 |
thermal/core: Protect thermal device operations against thermal device removal
Thermal device operations may be called after thermal zone device removal. After thermal zone device removal, thermal zone device operations must no longer be called. To prevent such calls from happening, ensure that the thermal device is registered before executing any thermal device operations. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Guenter Roeck
|
91b3aafc22 |
thermal/core: Remove thermal_zone_set_trips()
Since no callers of thermal_zone_set_trips() are left, remove the function. Document __thermal_zone_set_trips() instead. Explicitly state that the thermal zone lock must be held when calling the function, and that the pointer to the thermal zone must be valid. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Guenter Roeck
|
05eeee2b51 |
thermal/core: Protect sysfs accesses to thermal operations with thermal zone mutex
Protect access to thermal operations against thermal zone removal by acquiring the thermal zone device mutex. After acquiring the mutex, check if the thermal zone device is registered and abort the operation if not. With this change, we can call __thermal_zone_device_update() instead of thermal_zone_device_update() from trip_point_temp_store() and from emul_temp_store(). Similar, we can call __thermal_zone_set_trips() instead of thermal_zone_set_trips() from trip_point_hyst_store(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Guenter Roeck
|
ea37bec51f |
thermal/core: Protect hwmon accesses to thermal operations with thermal zone mutex
In preparation to protecting access to thermal operations against thermal zone device removal, protect hwmon accesses to thermal zone operations with the thermal zone mutex. After acquiring the mutex, ensure that the thermal zone device is registered before proceeding. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Guenter Roeck
|
1c439dec35 |
thermal/core: Introduce locked version of thermal_zone_device_update
In thermal_zone_device_set_mode(), the thermal zone mutex is released only to be reacquired in the subsequent call to thermal_zone_device_update(). Introduce __thermal_zone_device_update(), which is similar to thermal_zone_device_update() but has to be called with the thermal device mutex held. Call the new function from thermal_zone_device_set_mode() to avoid the extra thermal device mutex release/acquire sequence in that function. With the new function in place, re-implement thermal_zone_device_update() as wrapper around __thermal_zone_device_update() to acquire and release the thermal device mutex. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Guenter Roeck
|
ed97d10a8b |
thermal/core: Move parameter validation from __thermal_zone_get_temp to thermal_zone_get_temp
All callers of __thermal_zone_get_temp() already validated the thermal zone parameters. Move validation to thermal_zone_get_temp() where it is actually needed. Also add kernel documentation for __thermal_zone_get_temp(), listing the requirement that the function must be called with validated parameters and with thermal device mutex held. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Guenter Roeck
|
1c6b300607 |
thermal/core: Ensure that thermal device is registered in thermal_zone_get_temp
Calls to thermal_zone_get_temp() are not protected against thermal zone device removal. As result, it is possible that the thermal zone operations callbacks are no longer valid when thermal_zone_get_temp() is called. This may result in crashes such as BUG: unable to handle page fault for address: ffffffffc04ef420 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 5d60e067 P4D 5d60e067 PUD 5d610067 PMD 110197067 PTE 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 3209 Comm: cat Tainted: G W 5.10.136-19389-g615abc6eb807 #1 02df41ac0b12f3a64f4b34245188d8875bb3bce1 Hardware name: Google Coral/Coral, BIOS Google_Coral.10068.92.0 11/27/2018 RIP: 0010:thermal_zone_get_temp+0x26/0x73 Code: 89 c3 eb d3 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 53 48 85 ff 74 50 48 89 fb 48 81 ff 00 f0 ff ff 77 44 48 8b 83 98 03 00 00 <48> 83 78 10 00 74 36 49 89 f6 4c 8d bb d8 03 00 00 4c 89 ff e8 9f RSP: 0018:ffffb3758138fd38 EFLAGS: 00010287 RAX: ffffffffc04ef410 RBX: ffff98f14d7fb000 RCX: 0000000000000000 RDX: ffff98f17cf90000 RSI: ffffb3758138fd64 RDI: ffff98f14d7fb000 RBP: ffffb3758138fd50 R08: 0000000000001000 R09: ffff98f17cf90000 R10: 0000000000000000 R11: ffffffff8dacad28 R12: 0000000000001000 R13: ffff98f1793a7d80 R14: ffff98f143231708 R15: ffff98f14d7fb018 FS: 00007ec166097800(0000) GS:ffff98f1bbd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc04ef420 CR3: 000000010ee9a000 CR4: 00000000003506e0 Call Trace: temp_show+0x31/0x68 dev_attr_show+0x1d/0x4f sysfs_kf_seq_show+0x92/0x107 seq_read_iter+0xf5/0x3f2 vfs_read+0x205/0x379 __x64_sys_read+0x7c/0xe2 do_syscall_64+0x43/0x55 entry_SYSCALL_64_after_hwframe+0x61/0xc6 if a thermal device is removed while accesses to its device attributes are ongoing. The problem is exposed by code in iwl_op_mode_mvm_start(), which registers a thermal zone device only to unregister it shortly afterwards if an unrelated failure is encountered while accessing the hardware. Check if the thermal zone device is registered after acquiring the thermal zone device mutex to ensure this does not happen. The code was tested by triggering the failure in iwl_op_mode_mvm_start() on purpose. Without this patch, the kernel crashes reliably. The crash is no longer observed after applying this and the preceding patches. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Guenter Roeck
|
30b2ae07d3 |
thermal/core: Delete device under thermal device zone lock
Thermal device attributes may still be opened after unregistering the thermal zone and deleting the thermal device. Currently there is no protection against accessing thermal device operations after unregistering a thermal zone. To enable adding such protection, protect the device delete operation with the thermal zone device mutex. This requires splitting the call to device_unregister() into its components, device_del() and put_device(). Only the first call can be executed under mutex protection, since put_device() may result in releasing the thermal zone device memory. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Guenter Roeck
|
d35f29ed9d |
thermal/core: Destroy thermal zone device mutex in release function
Accesses to thermal zones, and with it the thermal zone device mutex, are still possible after the thermal zone device has been unregistered. For example, thermal_zone_get_temp() can be called from temp_show() in thermal_sysfs.c if the sysfs attribute was opened before the thermal device was unregistered. Move the call to mutex_destroy from thermal_zone_device_unregister() to thermal_release() to ensure that it is only destroyed after it is guaranteed to be no longer accessed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Zhang Rui
|
e77f069fd6 |
thermal: intel: intel_tcc_cooling: Add TCC cooling support for RaptorLake-S
Add RaptorLake to the list of processor models supported by the Intel TCC cooling driver. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Zhang Rui
|
be6abd3ed6 |
thermal: intel: intel_tcc_cooling: Detect TCC lock bit
When MSR_IA32_TEMPERATURE_TARGET is locked, TCC Offset can not be updated even if the PROGRAMMABE Bit is set. Yield the driver on platforms with MSR_IA32_TEMPERATURE_TARGET locked. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Ricardo Neri
|
54d9135cf2 |
thermal: intel: hfi: Improve the type of hfi_features::nr_table_pages
A Coverity static code scan raised a potential overflow_before_widen warning when hfi_features::nr_table_pages is used as an argument to memcpy in intel_hfi_process_event(). Even though the overflow can never happen (the maximum number of pages of the HFI table is 0x10 and 0x10 << PAGE_SHIFT = 0x10000), using size_t as the data type of hfi_features::nr_table_pages makes Coverity happy and matches the data type of the argument 'size' of memcpy(). Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Dan Carpenter
|
e49a1e1ee0 |
thermal/core: fix error code in __thermal_cooling_device_register()
Return an error pointer if ->get_max_state() fails. The current code
returns NULL which will cause an oops in the callers.
Fixes:
|
||
|
Viresh Kumar
|
a365105c68 |
thermal: sysfs: Reuse cdev->max_state
Now that the cooling device structure stores the max_state value, reuse it and drop max_states from struct cooling_dev_stats. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Viresh Kumar
|
c408b3d1d9 |
thermal: Validate new state in cur_state_store()
In cur_state_store(), the new state of the cooling device is received from user-space and is not validated by the thermal core but the same is left for the individual drivers to take care of. Apart from duplicating the code it leaves possibility for introducing bugs where a driver may not do it right. Lets make the thermal core check the new state itself and store the max value in the cooling device structure. Link: https://lore.kernel.org/all/Y0ltRJRjO7AkawvE@kili/ Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Thierry Reding
|
4c1e0a9735 |
firmware: tegra: bpmp: Use iosys-map helpers
The shared memory used for inter-processor communication between the CPU and the BPMP can reside either in system memory or in I/O memory. Use the iosys-map helpers to abstract these differences away. Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
|
Rafael J. Wysocki
|
4bb7f6c278 |
thermal: intel_powerclamp: Use first online CPU as control_cpu
Commit |
||
|
Linus Torvalds
|
aa512c115a |
More thermal control updates for 6.1-rc1
- Use platform data to get the sensor ID instead of parsing the device
in imx_sc thermal driver and remove the dedicated OF function from
the core code (Daniel Lezcano).
- Fix Kconfig dependency for the QCom tsens thermal driver (Jonathan
Cameron).
- Add missing const annotation to the RCar ops thermal driver (Lad
Prabhakar).
- Drop duplicate parameter check from
thermal_zone_device_register_with_trips() (Lad Prabhakar).
- Fix NULL pointer dereference in trip_point_temp_store() by making it
check if the ->set_trip_temp() operation is present (Lad Prabhakar).
- Fix the MSM8939 fourth sensor hardware ID in the QCom tsens thermal
driver (Vincent Knecht).
-----BEGIN PGP SIGNATURE-----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=BrtK
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These fix assorted issues in the thermal core and ARM thermal drivers.
Specifics:
- Use platform data to get the sensor ID instead of parsing the
device in imx_sc thermal driver and remove the dedicated OF
function from the core code (Daniel Lezcano).
- Fix Kconfig dependency for the QCom tsens thermal driver (Jonathan
Cameron).
- Add missing const annotation to the RCar ops thermal driver (Lad
Prabhakar).
- Drop duplicate parameter check from
thermal_zone_device_register_with_trips() (Lad Prabhakar).
- Fix NULL pointer dereference in trip_point_temp_store() by making
it check if the ->set_trip_temp() operation is present (Lad
Prabhakar).
- Fix the MSM8939 fourth sensor hardware ID in the QCom tsens thermal
driver (Vincent Knecht)"
* tag 'thermal-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id
thermal/core: Add a check before calling set_trip_temp()
thermal/core: Drop valid pointer check for type
thermal/drivers/rcar_thermal: Constify static thermal_zone_device_ops
thermal/drivers/qcom: Drop false build dependency of all QCOM drivers on QCOM_TSENS
thermal/of: Remove the thermal_zone_of_get_sensor_id() function
thermal/drivers/imx_sc: Rely on the platform data to get the resource id
|
||
|
Linus Torvalds
|
a09476668e |
Char/Misc and other driver changes for 6.1-rc1
Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
|
||
|
Linus Torvalds
|
0326074ff4 |
Networking changes for 6.1.
Core
----
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO.
This significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF
---
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions.
Expose crash_kexec() to allow BPF to trigger a kernel dump.
Use CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs.
Only structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols
---------
- WiFi: more Extremely High Throughput (EHT) and Multi-Link
Operation (MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state
and RST packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API
----------
- Allow selecting the conduit interface used by each port
in DSA switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting
per traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one
of the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much
as possible. It's one of those magic knobs which seemed like
a good idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers
----------------------
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers
-------
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay
window offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Gsio
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
|
||
|
Vincent Knecht
|
b0c883e900 |
thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id
Reading temperature from this sensor fails with 'Invalid argument'.
Looking at old vendor dts [1], its hw_id should be 3 instead of 4.
Change this hw_id accordingly.
[1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/master/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L511
Fixes:
|
||
|
Lad Prabhakar
|
597f500fde |
thermal/core: Add a check before calling set_trip_temp()
The thermal driver [0] for Renesas RZ/G2L SoC does not implement set_trip_temp() callback but has trips commit |
||
|
Lad Prabhakar
|
c71d8035f1 |
thermal/core: Drop valid pointer check for type
Drop the valid pointer check for type in thermal_zone_device_register_with_trips() as we already have it confirmed for != NULL from the previous if block. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220909181322.10933-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> |
||
|
Lad Prabhakar
|
c7114365e3 |
thermal/drivers/rcar_thermal: Constify static thermal_zone_device_ops
The only usage of rcar_thermal_zone_of_ops is to pass its address to devm_thermal_of_zone_register(), which takes a pointer to const struct thermal_zone_device_ops. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20220909182838.11154-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> |
||
|
Jonathan Cameron
|
34dc523bba |
thermal/drivers/qcom: Drop false build dependency of all QCOM drivers on QCOM_TSENS
The SPMI QCOM drivers have no dependency in Kconfig, but the Makefile will not be included without QCOM_TSENS. This unnecessarily reduces build coverage. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Bhupesh Sharma <bhupesh.sharma@linaro.org> Acked-by: Amit Kucheria <amitk@kernel.org> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20220821160032.2206349-1-jic23@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> |
||
|
Daniel Lezcano
|
5d10f480f7 |
thermal/of: Remove the thermal_zone_of_get_sensor_id() function
The function thermal_zone_of_get_sensor_id() is no longer used anywhere, remove it. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220818082316.2717095-2-daniel.lezcano@linaro.org |
||
|
Daniel Lezcano
|
31fd4b9db1 |
thermal/drivers/imx_sc: Rely on the platform data to get the resource id
Currently the imx_sc driver is reimplementing part of the thermal zone parsing from the thermal OF tree code to get the sensor id associated with a thermal zone sensor. The driver platform specific code should know what sensor is present and not rely on the thermal zone description to do a discovery. Well that is arguable but all the other drivers have a per platform data telling what sensor id to use. The imx_sc thermal driver is the only one using a different approach. Not invalid but forcing to keep a specific function 'thermal_zone_of_get_sensor_id()' to get the sensor id for a specific thermal zone as the self-explanatory function tells and having device tree code inside the driver. The thermal OF code had a rework and remains now self-encapsulated with a register/unregister functions and their 'devm' variants, except for the function mentioned above. After investigating, it appears the imx_sc sensor is defined in arch/arm64/boot/dts/freescale/imx8qxp.dtsi: which defines the cpu-thermal zone with the id: IMX_SC_R_SYSTEM This dtsi is included by: - imx8qxp-ai_ml.dts - imx8qxp-colibri.dtsi - imx8qxp-mek.dts The two first ones do not define more thermal zones The third one adds the pmic-thermal0 zone with id: IMX_SC_R_PMIC_0 The thermal OF code returns -ENODEV if the thermal zone registration with a specific id fails because the description is not available in the DT for such a sensor id. In this case we continue with the other ids without bailing out with an error. So we can build for the 'fsl,imx-sc-thermal' a compatible data, an array of sensor ids containing IMX_SC_R_SYSTEM and IMX_SC_R_PMIC_0. The latter won't be found but that will not result in an error but a normal case where we continue the initialization with other ids. Just to clarify, it is what the thermal framework does and what the other drivers are expecting: when a registration fails with -ENODEV this is not an error but a case where the description is not found in the device tree, that be can the entire thermal zones description or a specific thermal zone with an unknown id. There is one small functional change but without impact. When there is no 'thermal-zones' description the probe function was returning '-ENODEV', now it returns zero. When a thermal zone fails to register with an error different from '-ENODEV', the error is detected and returned. Change the code accordingly and remove the OF code from the driver. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220818082316.2717095-1-daniel.lezcano@linaro.org |
||
|
Rafael J. Wysocki
|
2e70ea7fb9 |
Merge branches 'thermal-intel' and 'thermal-drivers'
Merge thermal control driver changes for 6.1-rc1: - Use module_pci_driver() macro in the int340x processor_thermal driver (Shang XiaoJing). - Use get_cpu() instead of smp_processor_id() in the intel_powerclamp thermal driver to prevent it from crashing and remove unused accounting for IRQ wakes from it (Srinivas Pandruvada). - Consolidate priv->data_vault checks in int340x_thermal (Rafael Wysocki). - Check the policy first in cpufreq_cooling_register() (Xuewen Yan). - Drop redundant error message from da9062-thermal (zhaoxiao). - Drop of_match_ptr() from thermal_mmio (Jean Delvare). * thermal-intel: thermal: int340x: processor_thermal: Use module_pci_driver() macro thermal: intel_powerclamp: Remove accounting for IRQ wakes thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash thermal: int340x_thermal: Consolidate priv->data_vault checks * thermal-drivers: thermal: cpufreq_cooling: Check the policy first in cpufreq_cooling_register() thermal: da9062-thermal: Drop redundant error message thermal/drivers/thermal_mmio: Drop of_match_ptr() |
||
|
Rafael J. Wysocki
|
a7ae50fc34 |
Merge branch 'thermal-core'
Merge core thermal control changes for 6.1-rc1: - Increase maximum number of trip points in the thermal core (Sumeet Pawnikar). - Replace strlcpy() with unused retval with strscpy() in the core thermal control code (Wolfram Sang). - Do not lock thermal zone mutex in the user space governor (Rafael Wysocki) - Rework the device tree initialization, convert the drivers to the new API and remove the old OF code (Daniel Lezcano) - Fix return value to -ENODEV when searching for a specific thermal zone which does not exist (Daniel Lezcano) - Fix the return value inspection in of_thermal_zone_find() (Dan Carpenter) - Fix kernel panic when KASAN is enabled as it detects use after free when unregistering a thermal zone (Daniel Lezcano) - Move the set_trip ops inside the therma sysfs code (Daniel Lezcano) - Remove unnecessary error message as it is already showed in the underlying function (Jiapeng Chong) - Rework the monitoring path and move the locks upper in the call stack to fix some potentials race windows (Daniel Lezcano) - Fix lockdep_assert() warning introduced by the lock rework (Daniel Lezcano) - Revert the Mellanox 'hotter thermal zone' feature because it is already handled in the thermal framework core code (Daniel Lezcano) * thermal-core: (47 commits) thermal: core: Increase maximum number of trip points thermal: move from strlcpy() with unused retval to strscpy() thermal: gov_user_space: Do not lock thermal zone mutex Revert "mlxsw: core: Add the hottest thermal zone detection" thermal/core: Fix lockdep_assert() warning thermal/core: Move the mutex inside the thermal_zone_device_update() function thermal/core: Move the thermal zone lock out of the governors thermal/governors: Group the thermal zone lock inside the throttle function thermal/core: Rework the monitoring a bit thermal/core: Rearm the monitoring only one time thermal/drivers/qcom/spmi-adc-tm5: Remove unnecessary print function dev_err() thermal/of: Remove old OF code thermal/core: Move set_trip_temp ops to the sysfs code thermal/drivers/samsung: Switch to new of thermal API regulator/drivers/max8976: Switch to new of thermal API Input: sun4i-ts - switch to new of thermal API iio/drivers/sun4i_gpadc: Switch to new of thermal API hwmon/drivers/core: Switch to new of thermal API hwmon: pm_bus: core: Switch to new of thermal API ata/drivers/ahci_imx: Switch to new of thermal API ... |
||
|
Sumeet Pawnikar
|
82b1ec794d |
thermal: core: Increase maximum number of trip points
On one of the Chrome system, if we define more than 12 trip points, probe for thermal sensor fails with "int3403 thermal: probe of INTC1046:03 failed with error -22" and throws an error as "thermal_sys: Error: Incorrect number of thermal trips". The thermal_zone_device_register() interface needs maximum number of trip points supported in a zone as an argument. This number can't exceed THERMAL_MAX_TRIPS, which is currently set to 12. To address this issue, THERMAL_MAX_TRIPS value has to be increased. This interface also has an argument to specify a mask of trips which are writable. This mask is defined as an int. This mask sets the ceiling for increasing maximum number of supported trips. With the current implementation, maximum number of trips can be supported is 31. Also, THERMAL_MAX_TRIPS macro is used in one place only. So, remove THERMAL_MAX_TRIPS macro and compare num_trips directly with using a macro BITS_PER_TYPE(int)-1. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Shang XiaoJing
|
53e41b8593 |
thermal: int340x: processor_thermal: Use module_pci_driver() macro
Since PCI provides helper macro module_pci_driver(), the module_init/exit code can be replaced with it. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafał Miłecki
|
28fc7c986f |
nvmem: prefix all symbols with NVMEM_
This unifies all NVMEM symbols. They follow one style now. Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Srinivas Pandruvada
|
c4e927da89 |
thermal: intel_powerclamp: Remove accounting for IRQ wakes
There is a static variable "idle_wakeup_counter", which accounts for
number of wake ups because of IRQs and take actions to compensate idle
injection. This is now read and reset to 0, but never incremented.
So all the usage of this counter for idle injection has no use.
Also another static variable "reduce_irq", which depends on
"idle_wakeup_counter", so remove usage of "reduce_irq" also.
Commit
|
||
|
Srinivas Pandruvada
|
68b99e94a4 |
thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash
When CPU 0 is offline and intel_powerclamp is used to inject idle, it generates kernel BUG: BUG: using smp_processor_id() in preemptible [00000000] code: bash/15687 caller is debug_smp_processor_id+0x17/0x20 CPU: 4 PID: 15687 Comm: bash Not tainted 5.19.0-rc7+ #57 Call Trace: <TASK> dump_stack_lvl+0x49/0x63 dump_stack+0x10/0x16 check_preemption_disabled+0xdd/0xe0 debug_smp_processor_id+0x17/0x20 powerclamp_set_cur_state+0x7f/0xf9 [intel_powerclamp] ... ... Here CPU 0 is the control CPU by default and changed to the current CPU, if CPU 0 offlined. This check has to be performed under cpus_read_lock(), hence the above warning. Use get_cpu() instead of smp_processor_id() to avoid this BUG. Suggested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Greg Kroah-Hartman
|
4ba028e41b |
1st set of IIO new device support, features and cleanup for 6.1
This includes Nuno Sa's work to move the IIO core over to generic firmware
properties rather than having DT specific code paths. Combined with Andy
Shevchenko's long term work on drivers, this leaves IIO in a good state for
handling other firmware types.
New device support
- liteon,ltrf216a
* New driver and dt bindings to support this Light sensor.
- maxim,max11205
* New driver for this 16bit single channel ADC.
- memsensing,msa311
* New driver for this accelerometer. Includes a string helper for read/write.
- richtek,rtq6056
* New driver and dt binding to support this current monitor used to measure
power usage.
- yamaha,yas530
* Support the YAS537 variant (series includes several fixes for other parts
and new driver features).
Staging graduation
- adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using
the posted RFC of that framework.
Features
- core
* Large rework to make all the core IIO code use generic firmware properties.
Includes switching some drivers over as well using newly provided
generic interfaces and allowing removal of DT specific ones.
* Support for gesture event types for single and double tap. Used in
bosch,bma400.
- atmel,at91-sama5d2
* Add support for temperature sensor which uses two muxed inputs to estimate
the temperature.
* Handle trackx bits of EMR register to improve temp sampling accuracy.
* Runtime PM support.
- liteon,ltrf216a
* Add a _raw channel output to allow working around an issue with
differing conversions equations that breaks some user space controls.
- mexelis,mlx90632
* Support regulator control.
- ti,tsc2046
* External reference voltage support.
Clean up and minor fixes
- Tree-wide
* devm_clk_get_enabled() replacements of opencoded equivalent.
* Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers).
* Various minor warning and similar cleanup such as missing static
markings.
* strlcpy() to strscpy() for cases where return value not checked.
* provide units.h entries for more HZ units and use them in drivers.
- dt-bindings cleanup
* Drop maintainers listss where the email address is bouncing.
* Switch spi devices over to using spi-peripheral.yaml
* Add some missing unevaluatedProperties / additionalProperties: false
entries.
- ABI docs
* Add some missing channel type specific sampling frequency entries.
* Add parameter names for callback parameters.
- MAINTAINERS
* Fix wrong ADI forum links.
- core
* lockdep class per device, to avoid an issue with nest when one IIO
device is the consumer of another.
* White space tweaks.
- asc,dlhl60d
* Use get_unaligned_be24 to avoid some unusual data manipulation and masking.
- atmel,at91-sama5d2
* Fix wrong max value.
* Improve error handling when measuring pressure and touch.
* Add locks to remove races on updating oversampling / sampling freq.
* Add missing calls in suspend and resume path to ensure state is correctly
brought up if buffered capture was in use when suspend happened.
* Error out of write_raw() callback if buffered capture enabled to avoid
unpredictable behavior.
* Handle different versions having different oversampling ratio support and
drop excess error checking.
* Cleanup magic value defines where the name is just the value and hence
hurts readability.
* Use read_avail() callback to provide info on possible oversampling ratios.
* Correctly handle variable bit depth when doing oversampling on different
supported parts. Also handle higher oversampling ratios.
- fsl,imx8qxp
* Don't ignore errors from regulator_get_voltage() so as to avoid some
very surprising scaling.
- invensense,icp10100
* Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made
sense and is now deprecated. In this driver we just avoid double disabling
in some paths.
- maxim,max1363
* Drop consumer channel map provision by platform data. There have been
better ways of doing this for years and there are no in tree users.
- microchip,mcp3911
* Update status to maintained.
- qcom,spmi-adc5
* Support measurement of LDO output voltage.
- qcom,spmi-adc
* Add missing channel available on SM6125 SoC.
- st,stmpe
* Drop requirement on node name in binding now that driver correctly
doesn't enforce it.
- stx104
* Move to more appropriate addac directory
- ti,am335x
* Document ti,am654-adc compatible already in use in tree.
- ti,hmc5843
* Move dev_pm_ops out of header and use new pm macros to handle export.
- yamaha,yas530
* Minor cleanups.
-----BEGIN PGP SIGNATURE-----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=fUm6
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.1
This includes Nuno Sa's work to move the IIO core over to generic firmware
properties rather than having DT specific code paths. Combined with Andy
Shevchenko's long term work on drivers, this leaves IIO in a good state for
handling other firmware types.
New device support
- liteon,ltrf216a
* New driver and dt bindings to support this Light sensor.
- maxim,max11205
* New driver for this 16bit single channel ADC.
- memsensing,msa311
* New driver for this accelerometer. Includes a string helper for read/write.
- richtek,rtq6056
* New driver and dt binding to support this current monitor used to measure
power usage.
- yamaha,yas530
* Support the YAS537 variant (series includes several fixes for other parts
and new driver features).
Staging graduation
- adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using
the posted RFC of that framework.
Features
- core
* Large rework to make all the core IIO code use generic firmware properties.
Includes switching some drivers over as well using newly provided
generic interfaces and allowing removal of DT specific ones.
* Support for gesture event types for single and double tap. Used in
bosch,bma400.
- atmel,at91-sama5d2
* Add support for temperature sensor which uses two muxed inputs to estimate
the temperature.
* Handle trackx bits of EMR register to improve temp sampling accuracy.
* Runtime PM support.
- liteon,ltrf216a
* Add a _raw channel output to allow working around an issue with
differing conversions equations that breaks some user space controls.
- mexelis,mlx90632
* Support regulator control.
- ti,tsc2046
* External reference voltage support.
Clean up and minor fixes
- Tree-wide
* devm_clk_get_enabled() replacements of opencoded equivalent.
* Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers).
* Various minor warning and similar cleanup such as missing static
markings.
* strlcpy() to strscpy() for cases where return value not checked.
* provide units.h entries for more HZ units and use them in drivers.
- dt-bindings cleanup
* Drop maintainers listss where the email address is bouncing.
* Switch spi devices over to using spi-peripheral.yaml
* Add some missing unevaluatedProperties / additionalProperties: false
entries.
- ABI docs
* Add some missing channel type specific sampling frequency entries.
* Add parameter names for callback parameters.
- MAINTAINERS
* Fix wrong ADI forum links.
- core
* lockdep class per device, to avoid an issue with nest when one IIO
device is the consumer of another.
* White space tweaks.
- asc,dlhl60d
* Use get_unaligned_be24 to avoid some unusual data manipulation and masking.
- atmel,at91-sama5d2
* Fix wrong max value.
* Improve error handling when measuring pressure and touch.
* Add locks to remove races on updating oversampling / sampling freq.
* Add missing calls in suspend and resume path to ensure state is correctly
brought up if buffered capture was in use when suspend happened.
* Error out of write_raw() callback if buffered capture enabled to avoid
unpredictable behavior.
* Handle different versions having different oversampling ratio support and
drop excess error checking.
* Cleanup magic value defines where the name is just the value and hence
hurts readability.
* Use read_avail() callback to provide info on possible oversampling ratios.
* Correctly handle variable bit depth when doing oversampling on different
supported parts. Also handle higher oversampling ratios.
- fsl,imx8qxp
* Don't ignore errors from regulator_get_voltage() so as to avoid some
very surprising scaling.
- invensense,icp10100
* Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made
sense and is now deprecated. In this driver we just avoid double disabling
in some paths.
- maxim,max1363
* Drop consumer channel map provision by platform data. There have been
better ways of doing this for years and there are no in tree users.
- microchip,mcp3911
* Update status to maintained.
- qcom,spmi-adc5
* Support measurement of LDO output voltage.
- qcom,spmi-adc
* Add missing channel available on SM6125 SoC.
- st,stmpe
* Drop requirement on node name in binding now that driver correctly
doesn't enforce it.
- stx104
* Move to more appropriate addac directory
- ti,am335x
* Document ti,am654-adc compatible already in use in tree.
- ti,hmc5843
* Move dev_pm_ops out of header and use new pm macros to handle export.
- yamaha,yas530
* Minor cleanups.
* tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits)
iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS().
iio: adc: max1363: Drop provision to provide an IIO channel map via platform data
iio: accel: bma400: Add support for single and double tap events
iio: Add new event type gesture and use direction for single and double tap
iio: Use per-device lockdep class for mlock
iio: adc: add max11205 adc driver
dt-bindings: iio: adc: Add max11205 documentation file
iio: magnetometer: yamaha-yas530: Use dev_err_probe()
iio: magnetometer: yamaha-yas530: Make strings const in chip info
iio: magnetometer: yamaha-yas530: Use pointers as driver data
iio: adc: tsc2046: silent spi_device_id warning
iio: adc: tsc2046: add vref support
dt-bindings: iio: adc: ti,tsc2046: add vref-supply property
iio: light: ltrf216a: Add raw attribute
dt-bindings: iio: Add missing (unevaluated|additional)Properties on child nodes
MAINTAINERS: fix Analog Devices forum links
iio/accel: fix repeated words in comments
dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
iio: add MEMSensing MSA311 3-axis accelerometer driver
dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
...
|
||
|
Rafael J. Wysocki
|
e9a7c526c2 |
thermal: int340x_thermal: Consolidate priv->data_vault checks
It is sufficient to check priv->data_vault once in the error code path of int3400_thermal_probe(), so do that. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Xuewen Yan
|
cff895277c |
thermal: cpufreq_cooling: Check the policy first in cpufreq_cooling_register()
Since the policy needs to be accessed first when obtaining cpu devices,
first check whether the policy is legal before this.
Fixes:
|
||
|
Jilin Yuan
|
96f1c52992 |
thermal: Drop duplicate words from comments
Drop duplicate words from two kerneldoc comments in the thermal subsystem. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> [ rjw: Subject edits and changelog rewrite ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Jakub Kicinski
|
60ad1100d5 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
tools/testing/selftests/net/.gitignore sort the net-next version and use it Signed-off-by: Jakub Kicinski <kuba@kernel.org> |