Get rid of the initrd_gone hack which was required to keep
find_microcode_in_initrd() functional after init.
As find_microcode_in_initrd() is now only used during init, mark it
accordingly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211723.298854846@linutronix.de
Now that the microcode cache is initialized before the APs are brought
up, there is no point in scanning builtin/initrd microcode during AP
loading.
Convert the AP loader to utilize the cache, which in turn makes the CPU
hotplug callback which applies the microcode after initrd/builtin is
gone, obsolete as the early loading during late hotplug operations
including the resume path depends now only on the cache.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211723.243426023@linutronix.de
There is no reason to scan builtin/initrd microcode on each AP.
Cache the builtin/initrd microcode in an early initcall so that the
early AP loader can utilize the cache.
The existing fs initcall which invoked save_microcode_in_initrd_amd() is
still required to maintain the initrd_gone flag. Rename it accordingly.
This will be removed once the AP loader code is converted to use the
cache.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211723.187566507@linutronix.de
save_microcode_in_initrd_amd() fails to cache builtin microcode and only
scans initrd.
Use find_blobs_in_containers() instead which covers both.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231010150702.495139089@linutronix.de
find_blobs_in_containers() is invoked on every CPU but overwrites
unconditionally ucode_cpu_info of CPU0.
Fix this by using the proper CPU data and move the assignment into the
call site apply_ucode_from_containers() so that the function can be
reused.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231010150702.433454320@linutronix.de
Microcode is applied on the APs during early bringup. There is no point
in trying to apply the microcode again during the hotplug operations and
neither at the point where the microcode device is initialized.
Collect CPU info and microcode revision in setup_online_cpu() for now.
This will move to the CPU hotplug callback later.
[ bp: Leave the starting notifier for the following scenario:
- boot, late load, suspend to disk, resume
without the starting notifier, only the last core manages to update the
microcode upon resume:
# rdmsr -a 0x8b
10000bf
10000bf
10000bf
10000bf
10000bf
10000dc <----
This is on an AMD F10h machine.
For the future, one should check whether potential unification of
the CPU init path could cover the resume path too so that this can
be simplified even more.
tglx: This is caused by the odd handling of APs which try to find the
microcode blob in builtin or initrd instead of caching the microcode
blob during early init before the APs are brought up. Will be cleaned
up in a later step. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231017211723.018821624@linutronix.de
Take a cpu_signature argument and work from there. Move the match()
helper next to the callsite as there is no point for having it in
a header.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231002115902.797820205@linutronix.de
Nothing needs struct ucode_cpu_info. Make it take struct cpu_signature,
let it return a boolean and simplify the implementation. Rename it now
that the silly name clash with collect_cpu_info() is gone.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211722.851573238@linutronix.de
Deduplicate the early and late apply() functions.
[ bp: Rename the function which does the actual application to
__apply_microcode() to differentiate it from
microcode_ops.apply_microcode(). ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231017211722.795508212@linutronix.de
There are situations where the late microcode is loaded into memory but
is not applied:
1) The rendezvous fails
2) The microcode is rejected by the CPUs
If any of this happens then the pointer which was updated at firmware
load time is stale and subsequent CPU hotplug operations either fail to
update or create inconsistent microcode state.
Save the loaded microcode in a separate pointer before the late load is
attempted and when successful, update the hotplug pointer accordingly
via a new microcode_ops callback.
Remove the pointless fallback in the loader to a microcode pointer which
is never populated.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231002115902.505491309@linutronix.de
The early loading code is overly complicated:
- It scans the builtin/initrd for microcode not only on the BSP, but also
on all APs during early boot and then later in the boot process it
scans again to duplicate and save the microcode before initrd goes
away.
That's a pointless exercise because this can be simply done before
bringing up the APs when the memory allocator is up and running.
- Saving the microcode from within the scan loop is completely
non-obvious and a left over of the microcode cache.
This can be done at the call site now which makes it obvious.
Rework the code so that only the BSP scans the builtin/initrd microcode
once during early boot and save it away in an early initcall for later
use.
[ bp: Test and fold in a fix from tglx ontop which handles the need to
distinguish what save_microcode() does depending on when it is
called:
- when on the BSP during early load, it needs to find a newer
revision than the one currently loaded on the BSP
- later, before SMP init, it still runs on the BSP and gets the BSP
revision just loaded and uses that revision to know which patch
to save for the APs. For that it needs to find the exact one as
on the BSP.
]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211722.629085215@linutronix.de
CONFIG_RETHUNK, CONFIG_CPU_UNRET_ENTRY and CONFIG_CPU_SRSO are all
tangled up. De-spaghettify the code a bit.
Some of the rethunk-related code has been shuffled around within the
'.text..__x86.return_thunk' section, but otherwise there are no
functional changes. srso_alias_untrain_ret() and srso_alias_safe_ret()
((which are very address-sensitive) haven't moved.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/2845084ed303d8384905db3b87b77693945302b4.1693889988.git.jpoimboe@kernel.org
For enum switch statements which handle all possible cases, remove the
default case so a compiler warning gets printed if one of the enums gets
accidentally omitted from the switch statement.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/fcf6feefab991b72e411c2aed688b18e65e06aed.1693889988.git.jpoimboe@kernel.org
SBPB is only enabled in two distinct cases:
1) when SRSO has been disabled with srso=off
2) when SRSO has been fixed (in future HW)
Simplify the control flow by getting rid of the 'pred_cmd' label and
moving the SBPB enablement check to the two corresponding code sites.
This makes it more clear when exactly SBPB gets enabled.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/bb20e8569cfa144def5e6f25e610804bc4974de2.1693889988.git.jpoimboe@kernel.org
The SRSO default safe-ret mitigation is reported as "mitigated" even if
microcode hasn't been updated. That's wrong because userspace may still
be vulnerable to SRSO attacks due to IBPB not flushing branch type
predictions.
Report the safe-ret + !microcode case as vulnerable.
Also report the microcode-only case as vulnerable as it leaves the
kernel open to attacks.
Fixes: fb3bd914b3 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/a8a14f97d1b0e03ec255c81637afdf4cf0ae9c99.1693889988.git.jpoimboe@kernel.org
When overriding the requested mitigation with IBPB due to retbleed=ibpb,
print the mitigation in the usual format instead of a custom error
message.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/ec3af919e267773d896c240faf30bfc6a1fd6304.1693889988.git.jpoimboe@kernel.org
If the kernel wasn't compiled to support the requested option, print the
actual option that ends up getting used.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/7e7a12ea9d85a9f76ca16a3efb71f262dee46ab1.1693889988.git.jpoimboe@kernel.org
Make the SBPB check more robust against the (possible) case where future
HW has SRSO fixed but doesn't have the SRSO_NO bit set.
Fixes: 1b5277c0ea ("x86/srso: Add SRSO_NO support")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/cee5050db750b391c9f35f5334f8ff40e66c01b9.1693889988.git.jpoimboe@kernel.org
the guest kernel gets to emulate certain instructions in SEV-{ES,SNP}
guests by:
- disabling emulation of MMIO instructions when coming from user mode
- checking the IO permission bitmap before emulating IO instructions and
verifying the memory operands of INS/OUTS insns.
-----BEGIN PGP SIGNATURE-----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=MNCv
-----END PGP SIGNATURE-----
Merge tag 'sev_fixes_for_v6.6' of //git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"Take care of a race between when the #VC exception is raised and when
the guest kernel gets to emulate certain instructions in SEV-{ES,SNP}
guests by:
- disabling emulation of MMIO instructions when coming from user mode
- checking the IO permission bitmap before emulating IO instructions
and verifying the memory operands of INS/OUTS insns"
* tag 'sev_fixes_for_v6.6' of //git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Check for user-space IOIO pointing to kernel space
x86/sev: Check IOBM for IOIO exceptions from user-space
x86/sev: Disable MMIO emulation from user mode
Sanitize the microcode scan loop, fixup printks and move the loading
function for builtin microcode next to the place where it is used and mark
it __init.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231002115902.389400871@linutronix.de
so it becomes less obfuscated and rename it because there is nothing
generic about it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231002115902.330295409@linutronix.de
Mixed steppings aren't supported on Intel CPUs. Only one microcode patch
is required for the entire system. The caching of microcode blobs which
match the family and model is therefore pointless and in fact is
dysfunctional as CPU hotplug updates use only a single microcode blob,
i.e. the one where *intel_ucode_patch points to.
Remove the microcode cache and make it an AMD local feature.
[ tglx:
- save only at the end. Otherwise random microcode ends up in the
pointer for early loading
- free the ucode patch pointer in save_microcode_patch() only
after kmemdup() has succeeded, as reported by Andrew Cooper ]
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211722.404362809@linutronix.de
32-bit loads microcode before paging is enabled. The commit which
introduced that has zero justification in the changelog. The cover
letter has slightly more content, but it does not give any technical
justification either:
"The problem in current microcode loading method is that we load a
microcode way, way too late; ideally we should load it before turning
paging on. This may only be practical on 32 bits since we can't get
to 64-bit mode without paging on, but we should still do it as early
as at all possible."
Handwaving word salad with zero technical content.
Someone claimed in an offlist conversation that this is required for
curing the ATOM erratum AAE44/AAF40/AAG38/AAH41. That erratum requires
an microcode update in order to make the usage of PSE safe. But during
early boot, PSE is completely irrelevant and it is evaluated way later.
Neither is it relevant for the AP on single core HT enabled CPUs as the
microcode loading on the AP is not doing anything.
On dual core CPUs there is a theoretical problem if a split of an
executable large page between enabling paging including PSE and loading
the microcode happens. But that's only theoretical, it's practically
irrelevant because the affected dual core CPUs are 64bit enabled and
therefore have paging and PSE enabled before loading the microcode on
the second core. So why would it work on 64-bit but not on 32-bit?
The erratum:
"AAG38 Code Fetch May Occur to Incorrect Address After a Large Page is
Split Into 4-Kbyte Pages
Problem: If software clears the PS (page size) bit in a present PDE
(page directory entry), that will cause linear addresses mapped through
this PDE to use 4-KByte pages instead of using a large page after old
TLB entries are invalidated. Due to this erratum, if a code fetch uses
this PDE before the TLB entry for the large page is invalidated then it
may fetch from a different physical address than specified by either the
old large page translation or the new 4-KByte page translation. This
erratum may also cause speculative code fetches from incorrect addresses."
The practical relevance for this is exactly zero because there is no
splitting of large text pages during early boot-time, i.e. between paging
enable and microcode loading, and neither during CPU hotplug.
IOW, this load microcode before paging enable is yet another voodoo
programming solution in search of a problem. What's worse is that it causes
at least two serious problems:
1) When stackprotector is enabled, the microcode loader code has the
stackprotector mechanics enabled. The read from the per CPU variable
__stack_chk_guard is always accessing the virtual address either
directly on UP or via %fs on SMP. In physical address mode this
results in an access to memory above 3GB. So this works by chance as
the hardware returns the same value when there is no RAM at this
physical address. When there is RAM populated above 3G then the read
is by chance the same as nothing changes that memory during the very
early boot stage. That's not necessarily true during runtime CPU
hotplug.
2) When function tracing is enabled, the relevant microcode loader
functions and the functions invoked from there will call into the
tracing code and evaluate global and per CPU variables in physical
address mode. What could potentially go wrong?
Cure this and move the microcode loading after the early paging enable, use
the new temporary initrd mapping and remove the gunk in the microcode
loader which is required to handle physical address mode.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211722.348298216@linutronix.de
Early microcode loading on 32-bit runs in physical address mode because
the initrd is not covered by the initial page tables. That results in
a horrible mess all over the microcode loader code.
Provide a temporary mapping for the initrd in the initial page tables by
appending it to the actual initial mapping starting with a new PGD or
PMD depending on the configured page table levels ([non-]PAE).
The page table entries are located after _brk_end so they are not
permanently using memory space. The mapping is invalidated right away in
i386_start_kernel() after the early microcode loader has run.
This prepares for removing the physical address mode oddities from all
over the microcode loader code, which in turn allows further cleanups.
Provide the map and unmap code and document the place where the
microcode loader needs to be invoked with a comment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211722.292291436@linutronix.de
Prepare it for adding a temporary initrd mapping by splitting out the
actual map loop.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211722.175910753@linutronix.de
Move the ifdeffery out of the function and use proper typedefs to make it
work for both 2 and 3 level paging.
No functional change.
[ bp: Move mk_early_pgtbl_32() declaration into a header. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211722.111059491@linutronix.de
Use the existing macro instead of undefining and redefining __pa().
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211722.051625827@linutronix.de
Stackprotector cannot work before paging is enabled. The read from the per
CPU variable __stack_chk_guard is always accessing the virtual address
either directly on UP or via FS on SMP. In physical address mode this
results in an access to memory above 3GB.
So this works by chance as the hardware returns the same value when there
is no RAM at this physical address. When there is RAM populated above 3G
then the read is by chance the same as nothing changes that memory during
the very early boot stage.
Stop relying on pure luck and disable the stack protector for the only C
function which is called during early boot before paging is enabled.
Remove function tracing from the whole source file as there is no way to
trace this at all, but in case of CONFIG_DYNAMIC_FTRACE=n
mk_early_pgtbl_32() would access global function tracer variables in
physical address mode which again might work by chance.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231002115902.156063939@linutronix.de
Building with GCC 11.x results in the following warning:
arch/x86/kernel/cpu/microcode/amd.c: In function ‘find_blobs_in_containers’:
arch/x86/kernel/cpu/microcode/amd.c:504:58: error: ‘h.bin’ directive output may be truncated writing 5 bytes into a region of size between 1 and 7 [-Werror=format-truncation=]
arch/x86/kernel/cpu/microcode/amd.c:503:17: note: ‘snprintf’ output between 35 and 41 bytes into a destination of size 36
The issue is that GCC does not know that the family can only be a byte
(it ultimately comes from CPUID). Suggest the right size to the compiler
by marking the argument as char-size ("hh"). While at it, instead of
using the slightly more obscure precision specifier use the width with
zero padding (over 23000 occurrences in kernel sources, vs 500 for
the idiom using the precision).
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Closes: https://lore.kernel.org/oe-kbuild-all/202308252255.2HPJ6x5Q-lkp@intel.com/
Link: https://lore.kernel.org/r/20231016224858.2829248-1-pbonzini@redhat.com
In x86, hardware uses RMID to identify a monitoring group. When a user
creates a monitor group these details are not visible. These details
can help resctrl debugging.
Add RMID(mon_hw_id) to the monitor groups display in the resctrl interface.
Users can see these details when resctrl is mounted with "-o debug" option.
Add RFTYPE_MON_BASE that complements existing RFTYPE_CTRL_BASE and
represents files belonging to monitoring groups.
Other architectures do not use "RMID". Use the name mon_hw_id to refer
to "RMID" in an effort to keep the naming generic.
For example:
$cat /sys/fs/resctrl/mon_groups/mon_grp1/mon_hw_id
3
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-10-babu.moger@amd.com
Files unique to monitoring groups have the RFTYPE_MON flag. When a new
monitoring group is created the resctrl files with flags RFTYPE_BASE
(files common to all resource groups) and RFTYPE_MON (files unique to
monitoring groups) are created to support interacting with the new
monitoring group.
A resource group can support both monitoring and control, also termed
a CTRL_MON resource group. CTRL_MON groups should get both monitoring
and control resctrl files but that is not the case. Only the
RFTYPE_BASE and RFTYPE_CTRL files are created for CTRL_MON groups.
Ensure that files with the RFTYPE_MON flag are created for CTRL_MON groups.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-9-babu.moger@amd.com
In x86, hardware uses CLOSID to identify a control group. When a user
creates a control group this information is not visible to the user. It
can help resctrl debugging.
Add CLOSID(ctrl_hw_id) to the control groups display in the resctrl
interface. Users can see this detail when resctrl is mounted with the
"-o debug" option.
Other architectures do not use "CLOSID". Use the names ctrl_hw_id to refer
to "CLOSID" in an effort to keep the naming generic.
For example:
$cat /sys/fs/resctrl/ctrl_grp1/ctrl_hw_id
1
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-8-babu.moger@amd.com
Add "-o debug" option to mount resctrl filesystem in debug mode. When
in debug mode resctrl displays files that have the new RFTYPE_DEBUG flag
to help resctrl debugging.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-7-babu.moger@amd.com
The default resource group and its files are created during kernel init
time. Upcoming changes will make some resctrl files optional based on
a mount parameter. If optional files are to be added to the default
group based on the mount option, then each new file needs to be created
separately and call kernfs_activate() again.
Create all files of the default resource group during resctrl mount,
destroyed during unmount, to avoid scattering resctrl file addition
across two separate code flows.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-6-babu.moger@amd.com
rdt_enable_ctx() enables the features provided during resctrl mount.
Additions to rdt_enable_ctx() are required to also modify error paths
of rdt_enable_ctx() callers to ensure correct unwinding if errors
are encountered after calling rdt_enable_ctx(). This is error prone.
Introduce rdt_disable_ctx() to refactor the error unwinding of
rdt_enable_ctx() to simplify future additions. This also simplifies
cleanup in rdt_kill_sb().
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-5-babu.moger@amd.com
resctrl associates rftype flags with its files so that files can be chosen
based on the resource, whether it is info or base, and if it is control
or monitor type file. These flags use the RF_ as well as RFTYPE_ prefixes.
Change the prefix to RFTYPE_ for all these flags to be consistent.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-4-babu.moger@amd.com
The rftype flags are bitmaps used for adding files under the resctrl
filesystem. Some of these bitmap defines have one extra level of
indirection which is not necessary.
Drop the RF_* defines and simplify the macros.
[ bp: Massage commit message. ]
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-3-babu.moger@amd.com
The resctrl task assignment for monitor or control group needs to be
done one at a time. For example:
$mount -t resctrl resctrl /sys/fs/resctrl/
$mkdir /sys/fs/resctrl/ctrl_grp1
$echo 123 > /sys/fs/resctrl/ctrl_grp1/tasks
$echo 456 > /sys/fs/resctrl/ctrl_grp1/tasks
$echo 789 > /sys/fs/resctrl/ctrl_grp1/tasks
This is not user-friendly when dealing with hundreds of tasks.
Support multiple task assignment in one command with tasks ids separated
by commas. For example:
$echo 123,456,789 > /sys/fs/resctrl/ctrl_grp1/tasks
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-2-babu.moger@amd.com
Check the memory operand of INS/OUTS before emulating the instruction.
The #VC exception can get raised from user-space, but the memory operand
can be manipulated to access kernel memory before the emulation actually
begins and after the exception handler has run.
[ bp: Massage commit message. ]
Fixes: 597cfe4821 ("x86/boot/compressed/64: Setup a GHCB-based VC Exception handler")
Reported-by: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
The vga console driver is fairly self-contained, and only used by
architectures that explicitly initialize the screen_info settings.
Chance every instance that picks the vga console by setting conswitchp
to call a function instead, and pass a reference to the screen_info
there.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Khalid Azzi <khalid@gonehiking.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-6-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix the handling of the phycal timer offset when FEAT_ECV
and CNTPOFF_EL2 are implemented.
- Restore the functionnality of Permission Indirection that
was broken by the Fine Grained Trapping rework
- Cleanup some PMU event sharing code
MIPS:
- Fix W=1 build.
s390:
- One small fix for gisa to avoid stalls.
x86:
- Truncate writes to PMU counters to the counter's width to avoid spurious
overflows when emulating counter events in software.
- Set the LVTPC entry mask bit when handling a PMI (to match Intel-defined
architectural behavior).
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work to
kick the guest out of emulated halt.
- Fix for loading XSAVE state from an old kernel into a new one.
- Fixes for AMD AVIC
selftests:
- Play nice with %llx when formatting guest printf and assert statements.
- Clean up stale test metadata.
- Zero-initialize structures in memslot perf test to workaround a suspected
"may be used uninitialized" false positives from GCC.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUtvXgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOE3gf/Q0Xvi/oU/+iDMuvfCbMZg/nhbrsa
WmE/zXLrCF0DknppAsWulkhLGL2ceL6X+f37f2vWpBdG9SVDG/vSAg+QQDwsXiKN
hTJoaybtMMPZM64emPZKeLMrq3A/U32qIMmWMJkoQRyz6dftUhGqZEuy1jw8oomJ
n9idRDCMkbo+bick4URt0FEuI3Tf6dPIlG7P5hObFTw+nenzzxTjoxWZ432Mgyod
yqveEke4hcQ+6K1zdAcDNZqT9ZhxeTxAO4yrBAYfnFoPLhUXKDUumkqAQPNOhKTo
YN+b29kHBm+HvYkHN785FQla/13wjE1aq5TUj5J7NEDv4uRXDefDq2OAeg==
=b9AY
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of the phycal timer offset when FEAT_ECV and
CNTPOFF_EL2 are implemented
- Restore the functionnality of Permission Indirection that was
broken by the Fine Grained Trapping rework
- Cleanup some PMU event sharing code
MIPS:
- Fix W=1 build
s390:
- One small fix for gisa to avoid stalls
x86:
- Truncate writes to PMU counters to the counter's width to avoid
spurious overflows when emulating counter events in software
- Set the LVTPC entry mask bit when handling a PMI (to match
Intel-defined architectural behavior)
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work
to kick the guest out of emulated halt
- Fix for loading XSAVE state from an old kernel into a new one
- Fixes for AMD AVIC
selftests:
- Play nice with %llx when formatting guest printf and assert
statements
- Clean up stale test metadata
- Zero-initialize structures in memslot perf test to workaround a
suspected 'may be used uninitialized' false positives from GCC"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: arm64: timers: Correctly handle TGE flip with CNTPOFF_EL2
KVM: arm64: POR{E0}_EL1 do not need trap handlers
KVM: arm64: Add nPIR{E0}_EL1 to HFG traps
KVM: MIPS: fix -Wunused-but-set-variable warning
KVM: arm64: pmu: Drop redundant check for non-NULL kvm_pmu_events
KVM: SVM: Fix build error when using -Werror=unused-but-set-variable
x86: KVM: SVM: refresh AVIC inhibition in svm_leave_nested()
x86: KVM: SVM: add support for Invalid IPI Vector interception
x86: KVM: SVM: always update the x2avic msr interception
KVM: selftests: Force load all supported XSAVE state in state test
KVM: selftests: Load XSAVE state into untouched vCPU during state test
KVM: selftests: Touch relevant XSAVE state in guest for state test
KVM: x86: Constrain guest-supported xfeatures only at KVM_GET_XSAVE{2}
x86/fpu: Allow caller to constrain xfeatures when copying to uabi buffer
KVM: selftests: Zero-initialize entire test_result in memslot perf test
KVM: selftests: Remove obsolete and incorrect test case metadata
KVM: selftests: Treat %llx like %lx when formatting guest printf
KVM: x86/pmu: Synthesize at most one PMI per VM-exit
KVM: x86: Mask LVTPC when handling a PMI
KVM: x86/pmu: Truncate counter value to allowed width on write
...
Currently, all valid MCA_ADDR values are assumed to be usable on AMD
systems. However, this is not correct in most cases. Notifiers expecting
usable addresses may then operate on inappropriate values.
Define a helper function to do AMD-specific checks for a usable memory
address. List out all known cases.
[ bp: Tone down the capitalized words. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230613141142.36801-3-yazen.ghannam@amd.com
Define helper functions for legacy and SMCA systems in order to reuse
individual checks in later changes.
Describe what each function is checking for, and correct the XEC bitmask
for SMCA.
No functional change intended.
[ bp: Use "else in amd_mce_is_memory_error() to make the conditional
balanced, for readability. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230613141142.36801-2-yazen.ghannam@amd.com
This reverts commit 45e34c8af5, and the
two subsequent fixes to it:
3f874c9b2a ("x86/smp: Don't send INIT to non-present and non-booted CPUs")
b1472a60a5 ("x86/smp: Don't send INIT to boot CPU")
because it seems to result in hung machines at shutdown. Particularly
some Dell machines, but Thomas says
"The rest seems to be Lenovo and Sony with Alderlake/Raptorlake CPUs -
at least that's what I could figure out from the various bug reports.
I don't know which CPUs the DELL machines have, so I can't say it's a
pattern.
I agree with the revert for now"
Ashok Raj chimes in:
"There was a report (probably this same one), and it turns out it was a
bug in the BIOS SMI handler.
The client BIOS's were waiting for the lowest APICID to be the SMI
rendevous master. If this is MeteorLake, the BSP wasn't the one with
the lowest APIC and it triped here.
The BIOS change is also being pushed to others for assimilation :)
Server BIOS's had this correctly for a while now"
and it does look likely to be some bad interaction between SMI and the
non-BSP cores having put into INIT (and thus unresponsive until reset).
Link: https://bbs.archlinux.org/viewtopic.php?pid=2124429
Link: https://www.reddit.com/r/openSUSE/comments/16qq99b/tumbleweed_shutdown_did_not_finish_completely/
Link: https://forum.artixlinux.org/index.php/topic,5997.0.html
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2241279
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
prototypes between architectures.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=20Na
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
"Fix a Longsoon build warning by harmonizing the
arch_[un]register_cpu() prototypes between architectures"
* tag 'smp-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu-hotplug: Provide prototypes for arch CPU registration
Fei has reported that KASAN triggers during apply_alternatives() on
a 5-level paging machine:
BUG: KASAN: out-of-bounds in rcu_is_watching()
Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0
...
__asan_load4()
rcu_is_watching()
trace_hardirqs_on()
text_poke_early()
apply_alternatives()
...
On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57)
gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on
__VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled().
KASAN gets confused when apply_alternatives() patches the
KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START
static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue.
Fix it for real by disabling KASAN while the kernel is patching alternatives.
[ mingo: updated the changelog ]
Fixes: 6657fca06e ("x86/mm: Allow to boot without LA57 if CONFIG_X86_5LEVEL=y")
Reported-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231012100424.1456-1-kirill.shutemov@linux.intel.com
Mask off xfeatures that aren't exposed to the guest only when saving guest
state via KVM_GET_XSAVE{2} instead of modifying user_xfeatures directly.
Preserving the maximal set of xfeatures in user_xfeatures restores KVM's
ABI for KVM_SET_XSAVE, which prior to commit ad856280dd ("x86/kvm/fpu:
Limit guest user_xfeatures to supported bits of XCR0") allowed userspace
to load xfeatures that are supported by the host, irrespective of what
xfeatures are exposed to the guest.
There is no known use case where userspace *intentionally* loads xfeatures
that aren't exposed to the guest, but the bug fixed by commit ad856280dd
was specifically that KVM_GET_SAVE{2} would save xfeatures that weren't
exposed to the guest, e.g. would lead to userspace unintentionally loading
guest-unsupported xfeatures when live migrating a VM.
Restricting KVM_SET_XSAVE to guest-supported xfeatures is especially
problematic for QEMU-based setups, as QEMU has a bug where instead of
terminating the VM if KVM_SET_XSAVE fails, QEMU instead simply stops
loading guest state, i.e. resumes the guest after live migration with
incomplete guest state, and ultimately results in guest data corruption.
Note, letting userspace restore all host-supported xfeatures does not fix
setups where a VM is migrated from a host *without* commit ad856280dd,
to a target with a subset of host-supported xfeatures. However there is
no way to safely address that scenario, e.g. KVM could silently drop the
unsupported features, but that would be a clear violation of KVM's ABI and
so would require userspace to opt-in, at which point userspace could
simply be updated to sanitize the to-be-loaded XSAVE state.
Reported-by: Tyler Stachecki <stachecki.tyler@gmail.com>
Closes: https://lore.kernel.org/all/20230914010003.358162-1-tstachecki@bloomberg.net
Fixes: ad856280dd ("x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0")
Cc: stable@vger.kernel.org
Cc: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Message-Id: <20230928001956.924301-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Plumb an xfeatures mask into __copy_xstate_to_uabi_buf() so that KVM can
constrain which xfeatures are saved into the userspace buffer without
having to modify the user_xfeatures field in KVM's guest_fpu state.
KVM's ABI for KVM_GET_XSAVE{2} is that features that are not exposed to
guest must not show up in the effective xstate_bv field of the buffer.
Saving only the guest-supported xfeatures allows userspace to load the
saved state on a different host with a fewer xfeatures, so long as the
target host supports the xfeatures that are exposed to the guest.
KVM currently sets user_xfeatures directly to restrict KVM_GET_XSAVE{2} to
the set of guest-supported xfeatures, but doing so broke KVM's historical
ABI for KVM_SET_XSAVE, which allows userspace to load any xfeatures that
are supported by the *host*.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While reworking the x86 topology code Thomas tripped over creating a 'DIE' domain
for the package mask. :-)
Since these names are CONFIG_SCHED_DEBUG=y only, rename them to make the
name less ambiguous.
[ Shrikanth Hegde: rename on s390 as well. ]
[ Valentin Schneider: also rename it in the comments. ]
[ mingo: port to recent kernels & find all remaining occurances. ]
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Valentin Schneider <vschneid@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230712141056.GI3100107@hirez.programming.kicks-ass.net
The ->idt_seq and ->recv_jiffies variables added by:
1a3ea611fc ("x86/nmi: Accumulate NMI-progress evidence in exc_nmi()")
... place the exit-time check of the bottom bit of ->idt_seq after the
this_cpu_dec_return() that re-enables NMI nesting. This can result in
the following sequence of events on a given CPU in kernels built with
CONFIG_NMI_CHECK_CPU=y:
o An NMI arrives, and ->idt_seq is incremented to an odd number.
In addition, nmi_state is set to NMI_EXECUTING==1.
o The NMI is processed.
o The this_cpu_dec_return(nmi_state) zeroes nmi_state and returns
NMI_EXECUTING==1, thus opting out of the "goto nmi_restart".
o Another NMI arrives and ->idt_seq is incremented to an even
number, triggering the warning. But all is just fine, at least
assuming we don't get so many closely spaced NMIs that the stack
overflows or some such.
Experience on the fleet indicates that the MTBF of this false positive
is about 70 years. Or, for those who are not quite that patient, the
MTBF appears to be about one per week per 4,000 systems.
Fix this false-positive warning by moving the "nmi_restart" label before
the initial ->idt_seq increment/check and moving the this_cpu_dec_return()
to follow the final ->idt_seq increment/check. This way, all nested NMIs
that get past the NMI_NOT_RUNNING check get a clean ->idt_seq slate.
And if they don't get past that check, they will set nmi_state to
NMI_LATCHED, which will cause the this_cpu_dec_return(nmi_state)
to restart.
Fixes: 1a3ea611fc ("x86/nmi: Accumulate NMI-progress evidence in exc_nmi()")
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/0cbff831-6e3d-431c-9830-ee65ee7787ff@paulmck-laptop
When compiling the x86 kernel, if X86_LOCAL_APIC is not enabled but
GENERIC_MSI_IRQ is selected in '.config', the following compilation
error will occur:
include/linux/gpio/driver.h:38:19: error:
field 'msiinfo' has incomplete type
kernel/irq/msi.c:752:5: error: invalid use of incomplete typedef
'msi_alloc_info_t' {aka 'struct irq_alloc_info'}
kernel/irq/msi.c:740:1: error: control reaches end of non-void function
This is because file such as 'kernel/irq/msi.c' only depends on
'GENERIC_MSI_IRQ', and uses 'struct msi_alloc_info_t'. However,
this struct depends on 'X86_LOCAL_APIC'.
When enable 'GENERIC_MSI_IRQ' or 'X86_LOCAL_APIC' will select
'IRQ_DOMAIN_HIERARCHY', so exposing this struct using
'IRQ_DOMAIN_HIERARCHY' rather than 'X86_LOCAL_APIC'.
Under the above conditions, if 'HPET_TIMER' is selected, the following
compilation error will occur:
arch/x86/kernel/hpet.c:550:13: error: ‘x86_vector_domain’ undeclared
arch/x86/kernel/hpet.c:600:9: error: implicit declaration of
function ‘init_irq_alloc_info’
This is because 'x86_vector_domain' is defined in 'kernel/apic/vector.c'
which is compiled only when 'X86_LOCAL_APIC' is enabled. Besides,
function 'msi_domain_set_affinity' is defined in 'include/linux/msi.h'
which depends on 'GENERIC_MSI_IRQ'. So use 'X86_LOCAL_APIC' and
'GENERIC_MSI_IRQ' to expose these code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231012032659.323251-1-yaolu@kylinos.cn
Add the interface in resctrl FS to show if sparse cache allocation
bit masks are supported on the platform. Reading the file returns
either a "1" if non-contiguous 1s are supported and "0" otherwise.
The file path is /sys/fs/resctrl/info/{resource}/sparse_masks, where
{resource} can be either "L2" or "L3".
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Link: https://lore.kernel.org/r/7300535160beba41fd8aa073749ec1ee29b4621f.1696934091.git.maciej.wieczor-retman@intel.com
The setting for non-contiguous 1s support in Intel CAT is
hardcoded to false. On these systems, writing non-contiguous
1s into the schemata file will fail before resctrl passes
the value to the hardware.
In Intel CAT CPUID.0x10.1:ECX[3] and CPUID.0x10.2:ECX[3] stopped
being reserved and now carry information about non-contiguous 1s
value support for L3 and L2 cache respectively. The CAT
capacity bitmask (CBM) supports a non-contiguous 1s value if
the bit is set.
The exception are Haswell systems where non-contiguous 1s value
support needs to stay disabled since they can't make use of CPUID
for Cache allocation.
Originally-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Link: https://lore.kernel.org/r/1849b487256fe4de40b30f88450cba3d9abc9171.1696934091.git.maciej.wieczor-retman@intel.com
Provide common prototypes for arch_register_cpu() and
arch_unregister_cpu(). These are called by acpi_processor.c, with weak
versions, so the prototype for this is already set. It is generally not
necessary for function prototypes to be conditional on preprocessor macros.
Some architectures (e.g. Loongarch) are missing the prototype for this, and
rather than add it to Loongarch's asm/cpu.h, do the job once for everyone.
Since this covers everyone, remove the now unnecessary prototypes in
asm/cpu.h, and therefore remove the 'static' from one of ia64's
arch_register_cpu() definitions.
[ tglx: Bring back the ia64 part and remove the ACPI prototypes ]
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/E1qkoRr-0088Q8-Da@rmk-PC.armlinux.org.uk
Fix erratum #1485 on Zen4 parts where running with STIBP disabled can
cause an #UD exception. The performance impact of the fix is negligible.
Reported-by: René Rebe <rene@exactcode.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: René Rebe <rene@exactcode.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/D99589F4-BC5D-430B-87B2-72C20370CF57@exactcode.com
Since commit:
4d96f91091 ("x86/sev: Replace occurrences of sev_active() with cc_platform_has()")
... the SWIOTLB bounce buffer size adjustment and restricted virtio memory
setting also inadvertently apply to TDX: the code is using
cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT) as a gatekeeping condition,
which is also true for TDX, and this is also what we want.
To reflect this, move the corresponding code to generic mem_encrypt.c.
No functional changes intended.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20231010145220.3960055-2-alexander.shishkin@linux.intel.com
The kernel test robot reported kernel-doc warnings here:
arch/x86/kernel/cpu/resctrl/rdtgroup.c:915: warning: Function parameter or member 'of' not described in 'rdt_bit_usage_show'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:915: warning: Function parameter or member 'seq' not described in 'rdt_bit_usage_show'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:915: warning: Function parameter or member 'v' not described in 'rdt_bit_usage_show'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1144: warning: Function parameter or member 'type' not described in '__rdtgroup_cbm_overlaps'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1224: warning: Function parameter or member 'rdtgrp' not described in 'rdtgroup_mode_test_exclusive'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1261: warning: Function parameter or member 'of' not described in 'rdtgroup_mode_write'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1261: warning: Function parameter or member 'buf' not described in 'rdtgroup_mode_write'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1261: warning: Function parameter or member 'nbytes' not described in 'rdtgroup_mode_write'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1261: warning: Function parameter or member 'off' not described in 'rdtgroup_mode_write'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1370: warning: Function parameter or member 'of' not described in 'rdtgroup_size_show'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1370: warning: Function parameter or member 's' not described in 'rdtgroup_size_show'
arch/x86/kernel/cpu/resctrl/rdtgroup.c:1370: warning: Function parameter or member 'v' not described in 'rdtgroup_size_show'
The first two functions are missing an argument description while the
other three are file callbacks and don't require a kernel-doc comment.
Closes: https://lore.kernel.org/oe-kbuild-all/202310070434.mD8eRNAz-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Newman <peternewman@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20231011064843.246592-1-maciej.wieczor-retman@intel.com
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel element from sld_sysctl and itmt_kern_table. This
removal is safe because register_sysctl_init and register_sysctl
implicitly use the array size in addition to checking for the sentinel.
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Provide debug files which dump the topology related information of
cpuinfo_x86. This is useful to validate the upcoming conversion of the
topology evaluation for correctness or bug compatibility.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085113.353191313@linutronix.de
Per CPU cpuinfo is used to persist the logical package and die IDs. That's
really not the right place simply because cpuinfo is subject to be
reinitialized when a CPU goes through an offline/online cycle.
This works by chance today, but that's far from correct and neither obvious
nor documented.
Add a per cpu datastructure which persists those logical IDs, which allows
to cleanup the CPUID evaluation code.
This is a temporary workaround until the larger topology management is in
place, which makes all of this logical management mechanics obsolete.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085113.292947071@linutronix.de
APIC IDs are used with random data types u16, u32, int, unsigned int,
unsigned long.
Make it all consistently use u32 because that reflects the hardware
register width.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085113.233274223@linutronix.de
APIC IDs are used with random data types u16, u32, int, unsigned int,
unsigned long.
Make it all consistently use u32 because that reflects the hardware
register width.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085113.172569282@linutronix.de
APIC IDs are used with random data types u16, u32, int, unsigned int,
unsigned long.
Make it all consistently use u32 because that reflects the hardware
register width even if that callback going to be removed soonish.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085113.113097126@linutronix.de
APIC IDs are used with random data types u16, u32, int, unsigned int,
unsigned long.
Make it all consistently use u32 because that reflects the hardware
register width and fixup a few related usage sites for consistency sake.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085113.054064391@linutronix.de
APIC IDs are used with random data types u16, u32, int, unsigned int,
unsigned long.
Make it all consistently use u32 because that reflects the hardware
register width and move the default implementation to local.h as there are
no users outside the apic directory.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.981956102@linutronix.de
APIC IDs are used with random data types u16, u32, int, unsigned int,
unsigned long.
Make it all consistently use u32 because that reflects the hardware
register width and fixup the most obvious usage sites of that.
The APIC callbacks will be addressed separately.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.922905727@linutronix.de
APIC ID checks compare with BAD_APICID all over the place, but some
initializers and some code which fiddles with global data structure use
-1[U] instead. That simply cannot work at all.
Fix it up and use BAD_APICID consistently all over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.862835121@linutronix.de
The topology IDs which identify the LLC and L2 domains clearly belong to
the per CPU topology information.
Move them into cpuinfo_x86::cpuinfo_topo and get rid of the extra per CPU
data and the related exports.
This also paves the way to do proper topology evaluation during early boot
because it removes the only per CPU dependency for that.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.803864641@linutronix.de
Yet another topology related data pair. Rename logical_proc_id to
logical_pkg_id so it fits the common naming conventions.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.745139505@linutronix.de
cpuinfo_x86::x86_coreid_bits is only used by the AMD numa topology code. No
point in evaluating it on non AMD systems.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.687588373@linutronix.de
Rename it to core_id and stick it to the other ID fields.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.566519388@linutronix.de
Rename it to pkg_id which is the terminology used in the kernel.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.329006989@linutronix.de
The topology related information is randomly scattered across cpuinfo_x86.
Create a new structure cpuinfo_topo and move in a first step initial_apicid
and apicid into it.
Aside of being better readable this is in preparation for replacing the
horribly fragile CPU topology evaluation code further down the road.
Consolidate APIC ID fields to u32 as that represents the hardware type.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.269787744@linutronix.de
The SMT control mechanism got added as speculation attack vector
mitigation. The implemented logic relies on the primary thread mask to
be set up properly.
This turns out to be an issue with XEN/PV guests because their CPU hotplug
mechanics do not enumerate APICs and therefore the mask is never correctly
populated.
This went unnoticed so far because by chance XEN/PV ends up with
smp_num_siblings == 2. So cpu_smt_control stays at its default value
CPU_SMT_ENABLED and the primary thread mask is never evaluated in the
context of CPU hotplug.
This stopped "working" with the upcoming overhaul of the topology
evaluation which legitimately provides a fake topology for XEN/PV. That
sets smp_num_siblings to 1, which causes the core CPU hot-plug core to
refuse to bring up the APs.
This happens because cpu_smt_control is set to CPU_SMT_NOT_SUPPORTED which
causes cpu_bootable() to evaluate the unpopulated primary thread mask with
the conclusion that all non-boot CPUs are not valid to be plugged.
The core code has already been made more robust against this kind of fail,
but the primary thread mask really wants to be populated to avoid other
issues all over the place.
Just fake the mask by pretending that all XEN/PV vCPUs are primary threads,
which is consistent because all of XEN/PVs topology is fake or non-existent.
Fixes: 6a4d2657e0 ("x86/smp: Provide topology_is_primary_thread()")
Fixes: f54d4434c2 ("x86/apic: Provide cpu_primary_thread mask")
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.210011520@linutronix.de
Hygon processors with a model ID > 3 have CPUID leaf 0xB correctly
populated and don't need the fixed package ID shift workaround. The fixup
is also incorrect when running in a guest.
Fixes: e0ceeae708 ("x86/CPU/hygon: Fix phys_proc_id calculation logic for multi-die processors")
Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/tencent_594804A808BD93A4EBF50A994F228E3A7F07@qq.com
Link: https://lore.kernel.org/r/20230814085112.089607918@linutronix.de
Check the IO permission bitmap (if present) before emulating IOIO #VC
exceptions for user-space. These permissions are checked by hardware
already before the #VC is raised, but due to the VC-handler decoding
race it needs to be checked again in software.
Fixes: 25189d08e5 ("x86/sev-es: Add support for handling IOIO exceptions")
Reported-by: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tom Dohrmann <erbse.13@gmx.de>
Cc: <stable@kernel.org>
A virt scenario can be constructed where MMIO memory can be user memory.
When that happens, a race condition opens between when the hardware
raises the #VC and when the #VC handler gets to emulate the instruction.
If the MOVS is replaced with a MOVS accessing kernel memory in that
small race window, then write to kernel memory happens as the access
checks are not done at emulation time.
Disable MMIO emulation in user mode temporarily until a sensible use
case appears and justifies properly handling the race window.
Fixes: 0118b604c2 ("x86/sev-es: Handle MMIO String Instructions")
Reported-by: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tom Dohrmann <erbse.13@gmx.de>
Cc: <stable@kernel.org>
The kernel test robot reported kernel-doc warnings here:
monitor.c:34: warning: Cannot understand * @rmid_free_lru A least recently used list of free RMIDs on line 34 - I thought it was a doc line
monitor.c:41: warning: Cannot understand * @rmid_limbo_count count of currently unused but (potentially) on line 41 - I thought it was a doc line
monitor.c:50: warning: Cannot understand * @rmid_entry - The entry in the limbo and free lists. on line 50 - I thought it was a doc line
We don't have a syntax for documenting individual data items via
kernel-doc, so remove the "/**" kernel-doc markers and add a hyphen
for consistency.
Fixes: 6a445edce6 ("x86/intel_rdt/cqm: Add RDT monitoring initialization")
Fixes: 24247aeeab ("x86/intel_rdt/cqm: Improve limbo list processing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231006235132.16227-1-rdunlap@infradead.org
Commit bf5835bcdb ("intel_idle: Disable IBRS during long idle")
disables IBRS when the CPU enters long idle. However, when a CPU
becomes offline, the IBRS bit is still set when X86_FEATURE_KERNEL_IBRS
is enabled. That will impact the performance of a sibling CPU. Mitigate
this performance impact by clearing all the mitigation bits in SPEC_CTRL
MSR when offline. When the CPU is online again, it will be re-initialized
and so restoring the SPEC_CTRL value isn't needed.
Add a comment to say that native_play_dead() is a __noreturn function,
but it can't be marked as such to avoid confusion about the missing
MSR restoration code.
When DPDK is running on an isolated CPU thread processing network packets
in user space while its sibling thread is idle. The performance of the
busy DPDK thread with IBRS on and off in the sibling idle thread are:
IBRS on IBRS off
------- --------
packets/second: 7.8M 10.4M
avg tsc cycles/packet: 282.26 209.86
This is a 25% performance degradation. The test system is a Intel Xeon
4114 CPU @ 2.20GHz.
[ mingo: Extended the changelog with performance data from the 0/4 mail. ]
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20230727184600.26768-3-longman@redhat.com
rcu_report_dead() and rcutree_migrate_callbacks() have their headers in
rcupdate.h while those are pure rcutree calls, like the other CPU-hotplug
functions.
Also rcu_cpu_starting() and rcu_report_dead() have different naming
conventions while they mirror each other's effects.
Fix the headers and propose a naming that relates both functions and
aligns with the prefix of other rcutree CPU-hotplug functions.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
With the help of newly changed function parse_crashkernel() and generic
reserve_crashkernel_generic(), crashkernel reservation can be simplified
by steps:
1) Add a new header file <asm/crash_core.h>, and define CRASH_ALIGN,
CRASH_ADDR_LOW_MAX, CRASH_ADDR_HIGH_MAX and
DEFAULT_CRASH_KERNEL_LOW_SIZE in <asm/crash_core.h>;
2) Add arch_reserve_crashkernel() to call parse_crashkernel() and
reserve_crashkernel_generic(), and do the ARCH specific work if
needed.
3) Add ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION Kconfig in
arch/x86/Kconfig.
When adding DEFAULT_CRASH_KERNEL_LOW_SIZE, add crash_low_size_default() to
calculate crashkernel low memory because x86_64 has special requirement.
The old reserve_crashkernel_low() and reserve_crashkernel() can be
removed.
[bhe@redhat.com: move crash_low_size_default() code into <asm/crash_core.h>]
Link: https://lkml.kernel.org/r/ZQpeAjOmuMJBFw1/@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/20230914033142.676708-7-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add two parameters 'low_size' and 'high' to function parse_crashkernel(),
later crashkernel=,high|low parsing will be added. Make adjustments in
all call sites of parse_crashkernel() in arch.
Link: https://lkml.kernel.org/r/20230914033142.676708-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The usage of '&' before the array parameter is redundant because '&array'
is equivalent to 'array'. Therefore, there is no need to include '&'
before the array parameter. In fact, using '&' can cause more confusion,
especially for individuals who are not familiar with the address-of
operation for arrays. They might mistakenly believe that one is different
from the other and spend additional time realizing that they are actually
the same.
Harmonizing the style by removing the unnecessary '&' would save time for
those individuals.
Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/ZMt24BGEX9IhPSY6@fedora
