When this file was split in commit 5d945cbcd4 ("drm/amd/display:
Create a file dedicated to planes") this chunk seemed to get dropped.
Linus noticed on this rx580 and I've reproduced on FIJI which makes
sense as these are pre-modifier GPUs.
With this applied, I get gdm back.
Fixes: 5d945cbcd4 ("drm/amd/display: Create a file dedicated to planes")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
New driver:
- logicvc
vfio:
- use aperture API
core:
- of: Add data-lane helpers and convert drivers
- connector: Remove deprecated ida_simple_get()
media:
- Add various RGB666 and RGB888 format constants
panel:
- Add HannStar HSD101PWW
- Add ETML0700Y5DHA
dma-buf:
- add sync-file API
- set dma mask for udmabuf devices
fbcon:
- Improve scrolling performance
- Sanitize input
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
edid:
- CEA data-block iterators
- struct drm_edid introduction
- implement HF-EEODB extension
gem:
- don't use fb format non-existing planes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
mediatek:
- add vdosys0/1 for mt8195
- add MT8195 dp_intf driver
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution
-----BEGIN PGP SIGNATURE-----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=HQ9U
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- New driver for logicvc - which is a display IP core.
- EDID parser rework to add new extensions
- fbcon scrolling improvements
- i915 has some more DG2 work but not enabled by default, but should
have enough features for userspace to work now.
Otherwise it's lots of work all over the place. Detailed summary:
New driver:
- logicvc
vfio:
- use aperture API
core:
- of: Add data-lane helpers and convert drivers
- connector: Remove deprecated ida_simple_get()
media:
- Add various RGB666 and RGB888 format constants
panel:
- Add HannStar HSD101PWW
- Add ETML0700Y5DHA
dma-buf:
- add sync-file API
- set dma mask for udmabuf devices
fbcon:
- Improve scrolling performance
- Sanitize input
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
edid:
- CEA data-block iterators
- struct drm_edid introduction
- implement HF-EEODB extension
gem:
- don't use fb format non-existing planes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
mediatek:
- add vdosys0/1 for mt8195
- add MT8195 dp_intf driver
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution"
* tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits)
drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code
drm/amdgpu: enable support for psp 13.0.4 block
drm/amdgpu: add files for PSP 13.0.4
drm/amdgpu: add header files for MP 13.0.4
drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index
drm/amdgpu: send msg to IMU for the front-door loading
drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b"
drm/amdgpu: fix hive reference leak when reflecting psp topology info
drm/amd/pm: enable GFX ULV feature support for SMU13.0.0
drm/amd/pm: update driver if header for SMU 13.0.0
drm/amdgpu: move mes self test after drm sched re-started
drm/amdgpu: drop non-necessary call trace dump
drm/amdgpu: enable VCN cg and JPEG cg/pg
drm/amdgpu: vcn_4_0_2 video codec query
drm/amdgpu: add VCN_4_0_2 firmware support
drm/amdgpu: add VCN function in NBIO v7.7
drm/amdgpu: fix a vcn4 boot poll bug in emulation mode
drm/amd/amdgpu: add memory training support for PSP_V13
drm/amdkfd: remove an unnecessary amdgpu_bo_ref
drm/amd/pm: Add get_gfx_off_status interface for yellow carp
...
We got a report from Stephen/Michael that the PowerPC build was failing
with the following error:
ld: drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o uses soft float
ld: failed to merge target specific data of file drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o
This error happened because of the function optc3_set_vrr_m_const. This
function expects a double as a parameter in a code that is not allowed
to have FPU operations. After further investigation, it became clear
that optc3_set_vrr_m_const was never invoked, so we can safely drop this
function and fix the ld issue.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Melissa Wen <mwen@igalia.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Re-enable the new amdgpu display engine for powerpc, as long as the compiler is
correctly configured.
- Disable stack variable initialisation in prom_init to fix GCC 12 allmodconfig.
Thanks to: Dan Horák, Sudip Mukherjee.
-----BEGIN PGP SIGNATURE-----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=u93i
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Re-enable the new amdgpu display engine for powerpc, as long as the
compiler is correctly configured.
- Disable stack variable initialisation in prom_init to fix GCC 12
allmodconfig.
Thanks to Dan Horák and Sudip Mukherjee.
* tag 'powerpc-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
drm/amdgpu: Re-enable DCN for 64-bit powerpc
powerpc/64s: Disable stack variable initialisation for prom_init
All references to struct freesync_context were removed, so remove the
struct freesync_context itself and its entry on struct dc_stream_state.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eliminate the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c:2344:67-68: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "ret" variable needs to be signed for the error handling to work.
Fixes: 2ca97adccd ("drm/amd/display: Add Synaptics Fifo Reset Workaround")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit d11219ad53 ("amdgpu: disable powerpc support for the newer
display engine") disabled the DCN driver for all of powerpc due to
unresolved build failures with some compilers.
Further digging shows that the build failures only occur with compilers
that default to 64-bit long double.
Both the ppc64 and ppc64le ABIs define long double to be 128-bits, but
there are compilers in the wild that default to 64-bits. The compilers
provided by the major distros (Fedora, Ubuntu) default to 128-bits and
are not affected by the build failure.
There is a compiler flag to force 128-bit long double, which may be the
correct long term fix, but as an interim fix only allow building the DCN
driver if long double is 128-bits by default.
The bisection in commit d11219ad53 must have gone off the rails at
some point, the build failure occurs all the way back to the original
commit that enabled DCN support on powerpc, at least with some
toolchains.
Depends-on: d11219ad53 ("amdgpu: disable powerpc support for the newer display engine")
Fixes: 16a9dea110 ("amdgpu: Enable initial DCN support on POWER")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dan Horák <dan@danny.cz>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2100
Link: https://lore.kernel.org/r/20220725123918.1903255-1-mpe@ellerman.id.au
When we use the allmodconfig option we see the following error:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'dml32_ModeSupportAndSystemConfigurationFull':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:3799:1: error: the frame size of 2464 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
3799 | } // ModeSupportAndSystemConfigurationFull
This commit fixes this issue by moving part of the mode support
operation from ModeSupportAndSystemConfigurationFull to a dedicated
function.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Copy crc_skip_count when duplicating CRTC state
- Add debug option for idle optimizations on cursor updates
- Disable MPC split for DCN32/321
- Add missing ODM 2:1 policy logic
- Update DCN32 and DCN321 SR latencies
- Add reinstate dram in the FPO logic
- Add dc_ctx to link_enc_create() parameters
- Cache cursor when cursor exceeds 64x64
- Add support for manual DMUB FAMS trigger
- Fix dpstreamclk programming
- Add missing AUDIO_DTO_SEL reg field
- Add OTG/ODM functions
- Use correct clock source constructor for DCN314
- Use correct DTO_SRC_SEL for 128b/132b encoding
- Add pixel rate div calcs and programming
- Remove FPU flags from DCN30 Makefile
- Create patch bounding box function for isolate FPU
- Move mclk calculation function to DML
- Remove FPU operations from dcn201 resources
- Fallback to SW cursor if SubVP + cursor too big
- Drop unnecessary FPU flags on dcn302 files
- Reboot while unplug hdcp enabled dp from mst hub
- Reset pipe count when iterating for DET override
- Calculate MALL cache lines based on Mblks required
- Fix two MPO videos in single display ODM combine mode
- Guard against zero memory channels
- Updates SubVP + SubVP DRR cases updates
- Fix OPTC function pointers for DCN314
- Add enable/disable FIFO callbacks to stream setup
- Avoid MPC infinite loop
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
crc_skip_count is used to track how many frames to skip to allow the OTG
CRC engine to "warm up" before it outputs correct CRC values.
Experimentally, this seems to be 2 frames.
When duplicating CRTC states, this value was not copied to the
duplicated state. Therefore, when this state is committed, we will
needlessly wait 2 frames before outputing CRC values. Even if the CRC
engine is already warmed up.
[How]
Copy the crc_skip_count as part of dm_crtc_duplicate_state.
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For optimizations and debug purposes we added an option to exit idle
operations on cursor updates.
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to CRB, no need to rely on MPC splitting to maximize use of DET
anymore.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Phantom pipes must use the same configuration used in main pipes. This
commit add this check.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update worst case SR latencies according to values measured by hardware
team.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to handle FPO correctly, we need to reinstate the dram values.
This function adds the required code to handle the vblank stretch and
the dram calculation.
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Preparation to enable run time initialization of register offsets to add
dc_context to the link_enc_create callback. This is needed to get the
dc_ctx handle where register offset initialization routine is called.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When Static screen from MALL, the cursor needs to be
cached if cursor exceeds 64x64 size.
[How]
Program the bit that cache cursor in MALL when size
of the cursor exceeds 64x64.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add is_drr parameter to indicate DRR is enabled on
the panel to determine whether SubVP MCLK switch
logic should be enabled
- Add DRR manual trigger in FW (instead of driver)
because manual trigger programming triggers DRR
update pending and can block SubVP MCLK switches
from taking place
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently programming incorrect hpo inst as well as selecting incorrect source
[HOW]
Use hpo inst instead of otg inst to select dpstreamclk inst
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Needed to program audio dto
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Required for correct OTG_H_TIMING_CNTL programming
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previously was pointing to DCN3 clock constructor rather than DCN31's
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DP DTO isn't used for 128b/132b encoding
[HOW]
Check current link rate to determine whether using 8b/10b or 128/132b encoding
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY/HOW]
Need to calculate and set some pixel rate divisors on correct otg_inst
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At this stage, we must have all the FPU code for DCN30 isolated in the
DML folder. Drop FPU flags from Makefile.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the DCN30 resource, we have a small patch to the bounding box struct;
this patch uses FPU operations. This commit moves that specific part to
its function under the DML folder.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function responsible for calculating the MCLK switching has FPU
operations. This commit moves it to the dcn30_fpu file.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have some FPU operations on the resource part of the DCN201. This
commit drops FPU flags and moves any required FPU code to the DML
folder.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
