Long Term Reference (LTR) frames are the frames that are encoded
sometime in the past and stored in the DPB buffer list to be used
as reference to encode future frames.
This change adds controls to enable this feature.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
:c:type:`struct v4l2_requestbuffers` should be
struct :c:type:`v4l2_requestbuffers`.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The VIDIOC_G/S/TRY_EXT_CTRLS documentation has large explanatory texts for
some of the fields in a table. This makes it hard to read. Move those text
to a new cell spanning the whole width of the table, similar to what was
done for struct v4l2_pix_format. This makes it much more readable.
Also move the 'ctrl_class' description to below the 'which' description and
just mention that it is deprecated and that 'which' should be used instead.
Finally remove 'note::' for the V4L2_CTRL_WHICH_DEF_VAL description. It
doesn't have to be marked as a note, it's just a simple paragraph.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The _FRAME_SKIP_ enums were missing the _VIDEO prefix.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The media bus bit width of MEDIA_BUS_FMT_RGB101010_1X30 is 30.
So, 'Bit31' and 'Bit30' cells for the 'MEDIA_BUS_FMT_RGB101010_1X30'
row should be spaces instead of '0's.
Fixes: 54f38fcae5 ("media: docs: move uAPI book to userspace-api/media")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The added format is V4L2_PIX_FMT_YUV24, this is a packed
YUV 4:4:4 format, with 8 bits for each component, 24 bits
per sample.
This format is used by the i.MX 8QuadMax and i.MX 8DualXPlus/8QuadXPlus
JPEG encoder/decoder.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The documentation for V4L2_CID_MPEG_VIDEO_BITRATE was missing the word
'Average': this is the average video bitrate.
The V4L2_CID_MPEG_VIDEO_BITRATE_PEAK documentation *does* refer to
V4L2_CID_MPEG_VIDEO_BITRATE as the average video bitrate.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Until now, the VP8 V4L2 API was not exported as a public API,
and only defined in a private media header (media/vp8-ctrls.h).
The reason for this was a concern about the API not complete
and ready to support VP8 decoding hardware accelerators.
After reviewing the VP8 specification in detail, and now
that the API is able to support Cedrus and Hantro G1,
we can consider this ready.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since we are ready to stabilize the VP8 stateless API,
move the parsed VP8 pixel format.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rename to struct v4l2_vp8_loop_filter, which is closer to the
VP8 syntax. This change is only cosmetics, but since this API
is exposed to userspace, it's worth the trouble to get it consistent.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It doesn't seem to add any clarity to have a "header" suffix in controls,
struct names and flags.
Since this just makes names too long without any benefit, just drop it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a control to enable inserting of AUD NALU into encoded
bitstream.
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Deprecate mfc private display delay and display enable controls for
new clients and use the standard controls instead.
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Make display delay and display delay enable MFC controls standard v4l
controls. This will allow reuse of the controls for other decoder
drivers. Also the new proposed controls are now codec agnostic because
they could be used for any codec.
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As some hardware have a knob to enable or disable emulation prevention
bytes removal, driver writers ended up wondering what exactly the
START_CODE_NONE modes meant in this regards. This patch clarify what is
expected with a reference to the specification.
Reported-by: John Cox <jc@kynesim.co.uk>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sphinx doesn't allow placing those cross-reference identifies
everywhere. Misplacing them cause those warnings:
Documentation/userspace-api/media/v4l/hist-v4l2.rst:818: WARNING: undefined label: control-flags (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/hist-v4l2.rst:853: WARNING: undefined label: reserved-formats (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst:47: WARNING: undefined label: reserved-formats (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/subdev-formats.rst:39: WARNING: undefined label: v4l2-subdev-mbus-code-flags (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/subdev-formats.rst:53: WARNING: undefined label: v4l2-subdev-mbus-code-flags (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/subdev-formats.rst:67: WARNING: undefined label: v4l2-subdev-mbus-code-flags (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/subdev-formats.rst:83: WARNING: undefined label: v4l2-subdev-mbus-code-flags (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/subdev-formats.rst:97: WARNING: undefined label: v4l2-subdev-mbus-code-flags (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/subdev-formats.rst:140: WARNING: undefined label: v4l2-subdev-mbus-code-flags (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst:75: WARNING: undefined label: decoder-cmds (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/vidioc-dqevent.rst:234: WARNING: undefined label: control-flags (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst:156: WARNING: undefined label: dv-bt-flags (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst:41: WARNING: undefined label: ctrl-class (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst:246: WARNING: undefined label: ctrl-class (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst:269: WARNING: undefined label: ctrl-class (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst💯 WARNING: undefined label: modulator-txsubchans (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst:119: WARNING: undefined label: tuner-rxsubchans (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst:167: WARNING: undefined label: control-flags (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst:245: WARNING: undefined label: control-flags (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst:396: WARNING: undefined label: ctrl-class (if the link has no caption the label must precede a section header)
Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst:73: WARNING: undefined label: v4l2-subdev-mbus-code-flags (if the link has no caption the label must precede a section header)
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It makes more sense to place the xvideo example at the body,
keeping the footnote only to justify the design decision.
While this makes the text better, it also fixes the PDF
output.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are lots of tables that are not properly displayed
in LaTeX/PDF.
Fix the tablecolumns, add longtable where needed and LaTeX
formatting macros, in order to address such issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add missing format macros for the tables there to be properly
output.
While here, also remove the empty ".. note::" markup.
It should be noticed that ".. [1]" markups will generate footnotes,
and not a note within the main text body.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Picture Parameter Set Flags table for H-264 doesn't output
well on PDF. There are missing format instructions for LaTeX, and
the columns are too long.
Reduce the size of the second column, as 16 bits is more than enough
for the current flags usage, and add the needed bits for it to be
properly output in PDF format.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sphinx/LaTeX doesn't work well with literal blocks.
Due to that, V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF ends
being writing outside the table (and even outside the page).
We need to not only change the table size and font size, but
also to change the message, in order to avoid this bug.
So, improve the text a little bit, while ensuring that the
literal will be written at the beginning of the second line.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The bayer formats have a subtitle, specifying how many bits
they use. Add a title markup to those, as otherwise they
look weird, specially at the PDF output.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The text is repeating the name of the control, which causes
it to be displayed outside the page with PDF output.
Besides that, this is the only JPEG control doing that. Removing
the name duplication doesn't affect the description, but, instead,
make it nicer.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Those tables nicely fits on PDF output without any hack.
Yet, they are using a very small font, and have tabularcolumns.
Clean it up, and convert it to an ASCII artwork, as it
makes easier to see that no hacks are needed to display it ;-)
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of using "- 1", use "minus one".
The reason is that, if the table is split like:
V4L2_FWHT_FL_COMPONENTS_NUM_MSK 0x00070000 The number of color components
- 1.
One might not realize the meaning of the second line.
As a side effect, using text instead of arabic numbers is
more appropriate for formal documents like this spec.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While fixing issues with PDF generation, I noticed that
bit 8 was missing for WSS 625 format.
While here, convert the literal block into a tables,
as it becomes more visible.
I opted to move the payload into a separate table, as
Sphinx has troubles with complex nested tables.
This way, it should work fine on both html and LaTeX/PDF
formats.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The default way to document control enums is via tables.
Use one here too. As the table is simple, just use ASCII
artwork.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Those tables have small cells that fit nicely without requiring
line beaks.
So, they don't need tabular columns, as Sphinx/LaTeX
can adjust the width on such tables.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
YUV 4:4:4 is not subsampled, fix this in the docs.
Fixes: da785536e0 ("media: doc: pixfmt-yuv: Move all semi-planar YUV formats to common file")
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This control indicates the priority id to be applied
to base layer.
[hverkuil: renumbered V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID]
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Adds bitrate control for all coding layers for h264
same as hevc.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Adds min/max qp controls for B frame for h264.
- Adds min/max qp controls for I/P/B frames for hevc similar to h264.
- Update valid range of min/max qp for hevc to accommodate 10 bit.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add V4L2 controls for controlling CCS lens shading correction as well as
conveying its capabilities.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add two new controls for alternative analogue gain some CCS compliant
camera sensors support.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add V4L2 controls for analogue gain constants required to control
analogue gain. The values are device specific and thus need to be obtained
from the driver.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add user documentation for the CCS driver. This includes e.g. sub-devices
implemented by the driver.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add and document a media entity type for Image Signal Processor devices.
Surprisingly we didn't have one, so add one now. More or less all ISP
drivers should use this type instead of what they currently are using (or
not using anything).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Planar pixel formats are documented in separate files. This duplicates
information, as those formats share comon traits. Consolidate them in a
single file and summarize their descriptions in a single table.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Semi-planar pixel formats are documented in separate files. This
duplicates information, as those formats share comon traits. Consolidate
them in a single file and summarize their descriptions in a single
table.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Luma-only pixel formats are documented in separate files. This
duplicates information, as those formats share comon traits. Consolidate
them in a single file and describe them in a single table.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document the naming scheme for the existing packed YUV 4:4:4 formats, as
previously done for the RGB formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The 4:4:4 packed YUV formats are documented with a bit-level
representation, which creates a wide table. Switch to a byte-oriented
representation to make it more compact. This prepares for the addition
of formats with more than 8 bits per component, that would make the
table way too wide.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The padding bits are left blank, which look weird in the XYUV format,
and, worse, may lead to the VUYX format to be understand as consuming 3
bytes per pixel. Add 'X' for padding bits as we do for RGB formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The pixfmt-packed-yuv.rst file documents packed YUV 4:4:4 formats, but
is titled generically as "Packed YUV formats". 4:2:2 and 4:1:1 packed
YUV formats are documented in separate files, which can be confusing.
Group all packed YUV formats in pixfmt-packed-yuv.rst, which allows
documenting the 4:2:2 formats in a more concise way.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document YUV subsampling, including chroma spatial siting, and replace
the siting examples in individual formats by references to the common
documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Using '-' to represent padding bits and bytes make text and tables more
difficult to read. Use 'x' and 'X' instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
All formats using 8 bits per component can be described with a byte
granularity instead of a bit granularity without loss of precision. This
makes the corresponding table more compact and easier to read.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The naming scheme for the RGB pixel formats has been developed
organically, and isn't consistent between formats using less than 8 bits
per pixels (mostly stored in 1 or 2 bytes per pixel, except for RGB666
that uses 4 bytes per pixel) and formats with 8 bits per pixel (stored
in 3 or 4 bytes). For the latter category, the names use a components
order convention that is the opposite of the first category, and the
opposite of DRM pixel formats. This has led to lots of confusion in the
past, and would really benefit from being explained more precisely. Do
so, which also prepares for the addition of additional RGB pixels
formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Improve readability of the documentation by adding a section title for
the deprecated formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The packed RGB formats documentation includes a layout table without any
context. This doesn't bring much useful information, and is confusing at
best. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With Sphinx 2.x: those two warnings are produced:
/devel/v4l/docs/sphinx2/Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-meta-fmt-rk-isp1-params (if the link has no caption the label must precede a section header)
/devel/v4l/docs/sphinx2/Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-meta-fmt-rk-isp1-stat-3a (if the link has no caption the label must precede a section header)
The reason is that there's no blank line between the two
identifiers.
Fixes: 3f46cac678 ("media: admin-guide/pixfmt-meta-rkisp1.rst: pixfmt reference conforming with macro")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document V4L2_CTRL_TYPE_FWHT_PARAMS and p_fwht_params. Also
improve the V4L2_PIX_FMT_FWHT_STATELESS description.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add 'struct' to clarify that these are pointers to structs.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the 'bullets' for the HEVC stateless codec documentation.
It doesn't work, and they just show up as asterisks.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move the documentation for the stateless FWHT codec to
ext-ctrls-codec-stateless.rst since that is the proper place
for the stable stateless API documentation.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The FWHT stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.
Note that these control IDs were never exported as a public API,
they were only defined at the driver's code.
While not too late, let's rename them is preparation for promoting
the stateless FWHT codec API as a public API.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The v4l2_area struct was not documented in the media documentation,
which meant that references to that struct elsewhere in the documentation
never linked to anything.
[mchehab: remove .. cssclass:: longtable]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix warnings from make htmlddocs:
Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-meta-fmt-rk-isp1-params (if the link has no caption the label must precede a section header)
Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-meta-fmt-rk-isp1-stat-3a (if the link has no caption the label must precede a section header)
Fixes: df22026aeb ("media: videodev2.h, v4l2-ioctl: add rkisp1 meta buffer format")
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now that we've destaged the H264 stateless codec controls,
and with all the pieces in place, update the documentation
and move it to its own section.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When V4L2_CTRL_TYPE_H264_PRED_WEIGHTS was added, adding a replace
symbol directive in videodev2.h.rst.exceptions was missed.
Now that the control type is destaged, it's important to fix this.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a new control class to hold the stateless codecs controls
that are ready to be moved out of staging.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For historical reasons, stateful codec controls are named
as {}_MPEG_{}. While we can't at this point sanely
change all control IDs (such as V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER),
we can least change the more meaningful macros such as classes
macros.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V4L2_CTRL_CLASS_DETECT was never documented here, add it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "and".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "and".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "Any".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "in".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "controls".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "standard.".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "and".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "and".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "and".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The rc_proto enum values should be ignored for now, otherwise we get
warnings like:
Documentation/output/lirc.h.rst:6: WARNING: undefined label: rc-proto-max (if the link has no caption the label must precede a section header)
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 72e637fec5 ("media: rc: validate that "rc_proto" is reasonable")
Fixes: cea357bc25 ("media: lirc: ensure RC_PROTO_MAX has documentation")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add documentation for enum rc_proto and struct lirc_scancode
at the generated docs.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Make the license for those documents also compatible with GPLv2.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
All the items in the TODO list were addressed, uapi was reviewed,
documentation written, checkpatch errors fixed, several bugs fixed.
There is no big reason to keep this driver in staging, so move it out.
Dt-bindings Verified with:
make ARCH=arm64 dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml
Fields of MAINTAINERS file sorted according to output of
./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS
--order
[dt-bindings: media: rkisp1: move rockchip-isp1 bindings out of staging]
[dt-bindings: media: rkisp1: move rockchip-isp1 bindings out of staging]
[hverkuil: fix various checkpatch alignment warnings]
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
MEDIA_BUS_FMT_METADATA_FIXED should be used when
the same driver handles both sides of the link and
the bus format is a fixed metadata format that is
not configurable from userspace.
The width and height will be set to 0 for this format.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
cec-core.rst was missing 'are', and cec-ioc-g-mode.rst was missing
a comma.
In both cases this made the description of the Monitor All functionality
hard to read.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The description of the V4L2_COLORSPACE_470_SYSTEM_BG stated that it was
superseded by SMPTE 170M. That is incorrect. The probably root cause of
this is that the HDMI standard does not support this colorspace and,
unless otherwise signaled, will fall back to SMPTE 170M for SDTV.
However, EBU Tech. 3321 states that sources should signal Rec. 709 as the
colorimetry when using HDMI since the difference between Rec. 709 and
Tech. 3213 are negligible.
Update the text accordingly.
Also drop a spurious " at the end of the Tech 3213 title in the
bibliography.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Changeset 129134e541 ("media: media/v4l2: remove V4L2_FLAG_MEMORY_NON_CONSISTENT flag")
reverted an uAPI flag, but it kept some left-overs at the documentation.
Drop them too. This should solve this warning:
Documentation/userspace-api/media/v4l/buffer.rst:692: WARNING: The "flat-table" directive is empty; content required.
.. flat-table::
:header-rows: 0
:stub-columns: 0
:widths: 3 1 4
Fixes: 129134e541 ("media: media/v4l2: remove V4L2_FLAG_MEMORY_NON_CONSISTENT flag")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sphinx 3.x broke support for the cdomain.py extension, as the
c domain code was rewritten. Due to that, the c tags need to
be re-written, in order to use the new c domain notation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sphinx 3.x broke support for the cdomain.py extension, as the
c domain code was rewritten. Due to that, the c tags need to
be re-written, in order to use the new c domain notation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sphinx 3.x broke support for the cdomain.py extension, as the
c domain code was rewritten. Due to that, the c tags need to
be re-written, in order to use the new c domain notation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sphinx 3.x broke support for the cdomain.py extension, as the
c domain code was rewritten. Due to that, the c tags need to
be re-written, in order to use the new c domain notation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sphinx 3.x broke support for the cdomain.py extension, as the
c domain code was rewritten. Due to that, the c tags need to
be re-written, in order to use the new c domain notation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Using struct|enum :c:`type` here sounds a bad idea, as it may be
documenting data types that were already removed. Also, it makes
the file harder to read.
As automarkup.py should be able to handle those cases, let's
just get rid of the markup.
While not required by automarkup, in order to make easier for
grep, both type and names are now at the same line.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several places there where struct was used twice,
on multiple lines, like:
struct
struct ``v4l2_zoomcap``
That's probably done during the DocBook to ReSt conversion.
Probably the cases where "struct struct" were at the same line
was addressed back then, but the multi-line cases are still
there.
Get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sphinx 3.x is pedantic with glossary entries:
Documentation/userspace-api/media/glossary.rst:17: WARNING: term device driver not found in case sensitive match.made a reference to Device Driver instead.
Documentation/userspace-api/media/glossary.rst:59: WARNING: term media hardware not found in case sensitive match.made a reference to Media Hardware instead.
Documentation/userspace-api/media/glossary.rst:59: WARNING: term IP block not found in case sensitive match.made a reference to IP Block instead.
Documentation/userspace-api/media/glossary.rst:64: WARNING: term hardware component not found in case sensitive match.made a reference to Hardware Component instead.
Documentation/userspace-api/media/glossary.rst:64: WARNING: term ip block not found in case sensitive match.made a reference to IP Block instead.
Documentation/userspace-api/media/glossary.rst:70: WARNING: term peripheral not found in case sensitive match.made a reference to Peripheral instead.
Documentation/userspace-api/media/glossary.rst:130: WARNING: term V4L2 hardware not found in case sensitive match.made a reference to V4L2 Hardware instead.
Documentation/userspace-api/media/glossary.rst:151: WARNING: term hardware peripheral not found in case sensitive match.made a reference to Hardware Peripheral instead.
Documentation/userspace-api/media/glossary.rst:183: WARNING: term device node not found in case sensitive match.made a reference to Device Node instead.
Documentation/userspace-api/media/glossary.rst:191: WARNING: term bridge driver not found in case sensitive match.made a reference to Bridge Driver instead.
While it works with case-insensitive entires, it complains.
Let's fix it, in order to cleanup the warnings. Also, I won't
doubt that a later change on Sphinx will end breaking support
for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The metadata formats V4L2_META_FMT_RK_ISP1_PARAMS,
V4L2_META_FMT_RK_ISP1_STAT_3A are currently described in
two files under
drivers/staging/media/rkisp1/Documentation/media/uapi/v4l
This patch moves the description to one file:
Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst
The patch also extends the description and adds the rst file to
toctree.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch extends the CSC API in video devices to be supported
also on sub-devices. The flag V4L2_MBUS_FRAMEFMT_SET_CSC set by
the application when calling VIDIOC_SUBDEV_S_FMT ioctl.
The flags:
V4L2_SUBDEV_MBUS_CODE_CSC_COLORSPACE,
V4L2_SUBDEV_MBUS_CODE_CSC_XFER_FUNC,
V4L2_SUBDEV_MBUS_CODE_CSC_YCBCR_ENC/V4L2_SUBDEV_MBUS_CODE_CSC_HSV_ENC
V4L2_SUBDEV_MBUS_CODE_CSC_QUANTIZATION
are set by the driver in the VIDIOC_SUBDEV_ENUM_MBUS_CODE ioctl.
New 'flags' fields were added to the structs
v4l2_subdev_mbus_code_enum, v4l2_mbus_framefmt which are borrowed
from the 'reserved' field
The patch also replaces the 'ycbcr_enc' field in
'struct v4l2_mbus_framefmt' with a union that includes 'hsv_enc'
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For video capture it is the driver that reports the colorspace,
transfer function, Y'CbCr/HSV encoding and quantization range
used by the video, and there is no way to request something
different, even though many HDTV receivers have some sort of
colorspace conversion capabilities.
For output video this feature already exists since the application
specifies this information for the video format it will send out, and
the transmitter will enable any available CSC if a format conversion has
to be performed in order to match the capabilities of the sink.
For video capture we propose adding new v4l2_pix_format flag:
V4L2_PIX_FMT_FLAG_SET_CSC. The flag is set by the application,
the driver will interpret the colorspace, xfer_func, ycbcr_enc/hsv_enc
and quantization fields as the requested colorspace information and will
attempt to do the conversion it supports.
Drivers set the flags
V4L2_FMT_FLAG_CSC_COLORSPACE,
V4L2_FMT_FLAG_CSC_XFER_FUNC,
V4L2_FMT_FLAG_CSC_YCBCR_ENC/V4L2_FMT_FLAG_CSC_HSV_ENC,
V4L2_FMT_FLAG_CSC_QUANTIZATION,
in the flags field of the struct v4l2_fmtdesc during enumeration to
indicate that they support colorspace conversion for the respective field.
Drivers do not have to actually look at the flags. If the flags are not
set, then the fields 'colorspace', 'xfer_func', 'ycbcr_enc/hsv_enc',
and 'quantization' are set to the default values by the core, i.e. just
pass on the received format without conversion.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add menu control for VP9 codec levels. A total of 14 levels are
defined for Profile 0 (8bit) and Profile 2 (10bit). Each level
is a set of constrained bitstreams coded with targeted resolutions,
frame rates, and bitrates.
The definitions have been taken from webm project [1].
[1] https://www.webmproject.org/vp9/levels/
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The patch partially reverts some of the UAPI bits of the buffer
cache management hints. Namely, the queue consistency (memory
coherency) user-space hint because, as it turned out, the kernel
implementation of this feature was misusing DMA_ATTR_NON_CONSISTENT.
The patch reverts both kernel and user space parts: removes the
DMA consistency attr functions, rolls back changes to v4l2_requestbuffers,
v4l2_create_buffers structures and corresponding UAPI functions
(plus compat32 layer) and cleans up the documentation.
[hverkuil: fixed a few typos in the commit log]
[hverkuil: fixed vb2_core_reqbufs call in drivers/media/dvb-core/dvb_vb2.c]
[mchehab: fixed a typo in the commit log: revers->reverts]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When we added support for omap3, back in 2010, we added a new
type of V4L2 devices that aren't fully controlled via the V4L2
device node.
Yet, we have never clearly documented in the V4L2 specification
the differences between the two types.
Let's document them based on the the current implementation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
