Add check for pf->vf not being NULL before dereferencing
pf->vf[vsi->vf_id] in updating VSI filter sync.
Add a similar check before dereferencing !pf->vf[vsi->vf_id].trusted
in the condition for clearing promisc mode bit.
Fixes: c87c938f62 ("i40e: Add VF VLAN pruning")
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IGC_PTM_CTRL_SHRT_CYC defines the time between two consecutive PTM
requests. The bit resolution of this field is six bits. That bit five was
missing in the mask. This patch comes to correct the typo in the
IGC_PTM_CTRL_SHRT_CYC macro.
Fixes: a90ec84837 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20230821171721.2203572-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During stress test with attaching and detaching VF from KVM and
simultaneously changing VFs spoofcheck and trust there was a
NULL pointer dereference in ice_reset_vf that VF's VSI is null.
More than one instance of ice_reset_vf() can be running at a given
time. When we rebuild the VSI in ice_reset_vf, another reset can be
triaged from ice_service_task. In this case we can access the currently
uninitialized VSI and cause panic. The window for this racing condition
has been around for a long time but it's much worse after commit
227bf4500a ("ice: move VSI delete outside deconfig") because
the reset runs faster. ice_reset_vf() using vf->cfg_lock and when
we move this lock before accessing to the VF VSI, we can fix
BUG for all cases.
Panic occurs sometimes in ice_vsi_is_rx_queue_active() and sometimes
in ice_vsi_stop_all_rx_rings()
With our reproducer, we can hit BUG:
~8h before commit 227bf4500a ("ice: move VSI delete outside deconfig").
~20m after commit 227bf4500a ("ice: move VSI delete outside deconfig").
After this fix we are not able to reproduce it after ~48h
There was commit cf90b74341 ("ice: Fix call trace with null VSI during
VF reset") which also tried to fix this issue, but it was only
partially resolved and the bug still exists.
[ 6420.658415] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 6420.665382] #PF: supervisor read access in kernel mode
[ 6420.670521] #PF: error_code(0x0000) - not-present page
[ 6420.675659] PGD 0
[ 6420.677679] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 6420.682038] CPU: 53 PID: 326472 Comm: kworker/53:0 Kdump: loaded Not tainted 5.14.0-317.el9.x86_64 #1
[ 6420.691250] Hardware name: Dell Inc. PowerEdge R750/04V528, BIOS 1.6.5 04/15/2022
[ 6420.698729] Workqueue: ice ice_service_task [ice]
[ 6420.703462] RIP: 0010:ice_vsi_is_rx_queue_active+0x2d/0x60 [ice]
[ 6420.705860] ice 0000:ca:00.0: VF 0 is now untrusted
[ 6420.709494] Code: 00 00 66 83 bf 76 04 00 00 00 48 8b 77 10 74 3e 31 c0 eb 0f 0f b7 97 76 04 00 00 48 83 c0 01 39 c2 7e 2b 48 8b 97 68 04 00 00 <0f> b7 0c 42 48 8b 96 20 13 00 00 48 8d 94 8a 00 00 12 00 8b 12 83
[ 6420.714426] ice 0000:ca:00.0 ens7f0: Setting MAC 22:22:22:22:22:00 on VF 0. VF driver will be reinitialized
[ 6420.733120] RSP: 0018:ff778d2ff383fdd8 EFLAGS: 00010246
[ 6420.733123] RAX: 0000000000000000 RBX: ff2acf1916294000 RCX: 0000000000000000
[ 6420.733125] RDX: 0000000000000000 RSI: ff2acf1f2c6401a0 RDI: ff2acf1a27301828
[ 6420.762346] RBP: ff2acf1a27301828 R08: 0000000000000010 R09: 0000000000001000
[ 6420.769476] R10: ff2acf1916286000 R11: 00000000019eba3f R12: ff2acf19066460d0
[ 6420.776611] R13: ff2acf1f2c6401a0 R14: ff2acf1f2c6401a0 R15: 00000000ffffffff
[ 6420.783742] FS: 0000000000000000(0000) GS:ff2acf28ffa80000(0000) knlGS:0000000000000000
[ 6420.791829] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6420.797575] CR2: 0000000000000000 CR3: 00000016ad410003 CR4: 0000000000773ee0
[ 6420.804708] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6420.811034] vfio-pci 0000:ca:01.0: enabling device (0000 -> 0002)
[ 6420.811840] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6420.811841] PKRU: 55555554
[ 6420.811842] Call Trace:
[ 6420.811843] <TASK>
[ 6420.811844] ice_reset_vf+0x9a/0x450 [ice]
[ 6420.811876] ice_process_vflr_event+0x8f/0xc0 [ice]
[ 6420.841343] ice_service_task+0x23b/0x600 [ice]
[ 6420.845884] ? __schedule+0x212/0x550
[ 6420.849550] process_one_work+0x1e2/0x3b0
[ 6420.853563] ? rescuer_thread+0x390/0x390
[ 6420.857577] worker_thread+0x50/0x3a0
[ 6420.861242] ? rescuer_thread+0x390/0x390
[ 6420.865253] kthread+0xdd/0x100
[ 6420.868400] ? kthread_complete_and_exit+0x20/0x20
[ 6420.873194] ret_from_fork+0x1f/0x30
[ 6420.876774] </TASK>
[ 6420.878967] Modules linked in: vfio_pci vfio_pci_core vfio_iommu_type1 vfio iavf vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_counter nf_tables bridge stp llc sctp ip6_udp_tunnel udp_tunnel nfp tls nfnetlink bluetooth mlx4_en mlx4_core rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill sunrpc intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp irdma kvm_intel i40e kvm iTCO_wdt dcdbas ib_uverbs irqbypass iTCO_vendor_support mgag200 mei_me ib_core dell_smbios isst_if_mmio isst_if_mbox_pci rapl i2c_algo_bit drm_shmem_helper intel_cstate drm_kms_helper syscopyarea sysfillrect isst_if_common sysimgblt intel_uncore fb_sys_fops dell_wmi_descriptor wmi_bmof intel_vsec mei i2c_i801 acpi_ipmi ipmi_si i2c_smbus ipmi_devintf intel_pch_thermal acpi_power_meter pcspk
r
Fixes: efe4186000 ("ice: Fix memory corruption in VF driver")
Fixes: f23df5220d ("ice: Fix spurious interrupt during removal of trusted VF")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This reverts commit 7255355a06.
After this commit we are not able to attach VF to VM:
virsh attach-interface v0 hostdev --managed 0000:41:01.0 --mac 52:52:52:52:52:52
error: Failed to attach interface
error: Cannot set interface MAC to 52:52:52:52:52:52 for ifname enp65s0f0np0 vf 0: Resource temporarily unavailable
ice_check_vf_ready_for_cfg() already contain waiting for reset.
New condition in ice_check_vf_ready_for_reset() causing only problems.
Fixes: 7255355a06 ("ice: Fix ice VF reset during iavf initialization")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The driver is misconfiguring the hardware for some values of MTU such that
it could use multiple descriptors to receive a packet when it could have
simply used one.
Change the driver to use a round-up instead of the result of a shift, as
the shift can truncate the lower bits of the size, and result in the
problem noted above. It also aligns this driver with similar code in i40e.
The insidiousness of this problem is that everything works with the wrong
size, it's just not working as well as it could, as some MTU sizes end up
using two or more descriptors, and there is no way to tell that is
happening without looking at ice_trace or a bus analyzer.
Fixes: efc2214b60 ("ice: Add support for XDP")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-17 (ice)
This series contains updates to ice driver only.
Jan removes unused functions and refactors code to make, possible,
functions static.
Jake rearranges some functions to be logically grouped.
Marcin removes an unnecessary call to disable VLAN stripping.
Yang Yingliang utilizes list_for_each_entry() helper for a couple list
traversals.
Przemek removes some parameters from ice_aq_alloc_free_res() which were
always the same and reworks ice_aq_wait_for_event() to reduce chance of
race.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: split ice_aq_wait_for_event() func into two
ice: embed &ice_rq_event_info event into struct ice_aq_task
ice: ice_aq_check_events: fix off-by-one check when filling buffer
ice: drop two params from ice_aq_alloc_free_res()
ice: use list_for_each_entry() helper
ice: Remove redundant VSI configuration in eswitch setup
ice: move E810T functions to before device agnostic ones
ice: refactor ice_vsi_is_vlan_pruning_ena
ice: refactor ice_ptp_hw to make functions static
ice: refactor ice_sched to make functions static
ice: Utilize assign_bit() helper
ice: refactor ice_vf_lib to make functions static
ice: refactor ice_lib to make functions static
ice: refactor ice_ddp to make functions static
ice: remove unused methods
====================
Link: https://lore.kernel.org/r/20230817212239.2601543-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
virtchnl: fix fake 1-elem arrays
Alexander Lobakin says:
6.5-rc1 started spitting warning splats when composing virtchnl
messages, precisely on virtchnl_rss_key and virtchnl_lut:
[ 84.167709] memcpy: detected field-spanning write (size 52) of single
field "vrk->key" at drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1095
(size 1)
[ 84.169915] WARNING: CPU: 3 PID: 11 at drivers/net/ethernet/intel/
iavf/iavf_virtchnl.c:1095 iavf_set_rss_key+0x123/0x140 [iavf]
...
[ 84.191982] Call Trace:
[ 84.192439] <TASK>
[ 84.192900] ? __warn+0xc9/0x1a0
[ 84.193353] ? iavf_set_rss_key+0x123/0x140 [iavf]
[ 84.193818] ? report_bug+0x12c/0x1b0
[ 84.194266] ? handle_bug+0x42/0x70
[ 84.194714] ? exc_invalid_op+0x1a/0x50
[ 84.195149] ? asm_exc_invalid_op+0x1a/0x20
[ 84.195592] ? iavf_set_rss_key+0x123/0x140 [iavf]
[ 84.196033] iavf_watchdog_task+0xb0c/0xe00 [iavf]
...
[ 84.225476] memcpy: detected field-spanning write (size 64) of single
field "vrl->lut" at drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1127
(size 1)
[ 84.227190] WARNING: CPU: 27 PID: 1044 at drivers/net/ethernet/intel/
iavf/iavf_virtchnl.c:1127 iavf_set_rss_lut+0x123/0x140 [iavf]
...
[ 84.246601] Call Trace:
[ 84.247228] <TASK>
[ 84.247840] ? __warn+0xc9/0x1a0
[ 84.248263] ? iavf_set_rss_lut+0x123/0x140 [iavf]
[ 84.248698] ? report_bug+0x12c/0x1b0
[ 84.249122] ? handle_bug+0x42/0x70
[ 84.249549] ? exc_invalid_op+0x1a/0x50
[ 84.249970] ? asm_exc_invalid_op+0x1a/0x20
[ 84.250390] ? iavf_set_rss_lut+0x123/0x140 [iavf]
[ 84.250820] iavf_watchdog_task+0xb16/0xe00 [iavf]
Gustavo already tried to fix those back in 2021[0][1]. Unfortunately,
a VM can run a different kernel than the host, meaning that those
structures are sorta ABI.
However, it is possible to have proper flex arrays + struct_size()
calculations and still send the very same messages with the same sizes.
The common rule is:
elem[1] -> elem[]
size = struct_size() + <difference between the old and the new msg size>
The "old" size in the current code is calculated 3 different ways for
10 virtchnl structures total. Each commit addresses one of the ways
cumulatively instead of per-structure.
I was planning to send it to -net initially, but given that virtchnl was
renamed from i40evf and got some fat style cleanup commits in the past,
it's not very straightforward to even pick appropriate SHAs, not
speaking of automatic portability. I may send manual backports for
a couple of the latest supported kernels later on if anyone needs it
at all.
[0] https://lore.kernel.org/all/20210525230912.GA175802@embeddedor
[1] https://lore.kernel.org/all/20210525231851.GA176647@embeddedor
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
virtchnl: fix fake 1-elem arrays for structures allocated as `nents`
virtchnl: fix fake 1-elem arrays in structures allocated as `nents + 1`
virtchnl: fix fake 1-elem arrays in structs allocated as `nents + 1` - 1
====================
Link: https://lore.kernel.org/r/20230816210657.1326772-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e1949 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88a ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-16 (iavf, i40e)
This series contains updates to iavf and i40e drivers.
Piotr adds checks for unsupported Flow Director rules on iavf.
Andrii replaces incorrect 'write' messaging on read operations for i40e.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix misleading debug logs
iavf: fix FDIR rule fields masks validation
====================
Link: https://lore.kernel.org/r/20230816193308.1307535-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mitigate race between registering on wait list and receiving
AQ Response from FW.
ice_aq_prep_for_event() should be called before sending AQ command,
ice_aq_wait_for_event() should be called after sending AQ command,
to wait for AQ Response.
Please note, that this was found by reading the code,
an actual race has not yet materialized.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Expose struct ice_aq_task to callers,
what takes burden of memory ownership out from AQ-wait family of functions,
and reduces need for heap-based allocations.
Embed struct ice_rq_event_info event into struct ice_aq_task
(instead of it being a ptr) to remove some more code from the callers.
Subsequent commit will improve more based on this one.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Allow task's event buffer to be filled also in the case that it's size
is exactly the size of the message.
Fixes: d69ea414c9 ("ice: implement device flash update via devlink")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Drop @num_entries and @cd params, latter of which was always NULL.
Number of entities to alloc is passed in internal buffer, the outer layer
(that @num_entries was assigned to) meaning is closer to "the number of
requests", which was =1 in all cases.
ice_free_hw_res() was always called with 1 as its @num arg.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Convert list_for_each() to list_for_each_entry() where applicable.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove a call to disable VLAN stripping on switchdev control plane VSI, as
it is disabled by default.
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 885fe6932a ("ice: Add support for SMA control multiplexer")
accidentally placed all of the E810T SMA control functions in the middle of
the device agnostic functions section of ice_ptp_hw.c
This works fine, but makes it harder for readers to follow. The
ice_ptp_hw.c file is laid out such that each hardware family has the
specific functions in one block, with the access functions placed at the
end of the file.
Move the E810T functions so that they are in a block just after the E810
functions. Also move the ice_get_phy_tx_tstamp_ready_e810 which got added
at the end of the E810T block.
This keeps the functions laid out in a logical order and avoids intermixing
the generic access functions with the device specific implementations.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As this method became static, and is already called
with check for vsi being non-null, an unnecessary check along
with superfluous parentheses is removed.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As following methods are not used outside ice_ptp_hw,
they can be made static:
ice_read_phy_reg_e822
ice_write_phy_reg_e822
ice_ptp_prep_port_adj_e822
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As ice_sched_set_node_bw_lmt_per_tc is not used
outside of ice_sched, it can be made static.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The if/else check for bit setting can be replaced by using the
assign_bit() helper so do so.
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ADQ and switchdev are not supported simultaneously. Enabling both at the
same time can result in nullptr dereference.
To prevent this, check if ADQ is active when changing devlink mode to
switchdev mode, and check if switchdev is active when enabling ADQ.
Fixes: fbc7b27af0 ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816193405.1307580-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As following methods are not used outside ice_vf_lib,
they can be made static:
ice_vf_rebuild_host_vlan_cfg
ice_vf_rebuild_host_tx_rate_cfg
ice_vf_set_host_trust_cfg
ice_vf_rebuild_host_mac_cfg
ice_vf_rebuild_aggregator_node_cfg
ice_vf_rebuild_host_cfg
ice_set_vf_state_qs_dis
ice_vf_set_initialized
In order to achieve that, the order in which these
were defined was reorganized.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As following methods are not used outside of ice_lib,
they can be made static:
ice_vsi_is_vlan_pruning_ena
ice_vsi_cfg_frame_size
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As following methods are not used outside of ice_ddp,
they can be made static:
ice_verify_pgk
ice_pkg_val_buf
ice_aq_download_pkg
ice_aq_update_pkg
ice_find_seg_in_pkg
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Following methods were found to no longer be in use:
ice_is_pca9575_present
ice_mac_fltr_exist
ice_napi_del
Remove them.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Finally, fix 3 structures which are allocated technically correctly,
i.e. the calculated size equals to the one that struct_size() would
return, except for sizeof(). For &virtchnl_vlan_filter_list_v2, use
the same approach when there are no enough space as taken previously
for &virtchnl_vlan_filter_list, i.e. let the maximum size be calculated
automatically instead of trying to guestimate it using maths.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There are five virtchnl structures, which are allocated and checked in
the code as `nents + 1`, meaning that they always have memory for one
excessive element regardless of their actual number. This comes from
that their sizeof() includes space for 1 element and then they get
allocated via struct_size() or its open-coded equivalents, passing
the actual number of elements.
Expand virtchnl_struct_size() to handle such structures and replace
those 1-elem arrays with proper flex ones. Also fix several places
which open-code %IAVF_VIRTCHNL_VF_RESOURCE_SIZE. Finally, let the
virtchnl_ether_addr_list size be computed automatically when there's
no enough space for the whole list, otherwise we have to open-code
reverse struct_size() logics.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The two most problematic virtchnl structures are virtchnl_rss_key and
virtchnl_rss_lut. Their "flex" arrays have the type of u8, thus, when
allocating / checking, the actual size is calculated as `sizeof +
nents - 1 byte`. But their sizeof() is not 1 byte larger than the size
of such structure with proper flex array, it's two bytes larger due to
the padding. That said, their size is always 1 byte larger unless
there are no tail elements -- then it's +2 bytes.
Add virtchnl_struct_size() macro which will handle this case (and later
other cases as well). Make its calling conv the same as we call
struct_size() to allow it to be drop-in, even though it's unlikely to
become possible to switch to generic API. The macro will calculate a
proper size of a structure with a flex array at the end, so that it
becomes transparent for the compilers, but add the difference from the
old values, so that the real size of sorta-ABI-messages doesn't change.
Use it on the allocation side in IAVF and the receiving side (defined
as static inline in virtchnl.h) for the mentioned two structures.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Change "write" into the actual "read" word.
Change parameters description.
Fixes: 7073f46e44 ("i40e: Add AQ commands for NVM Update for X722")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Return an error if a field's mask is neither full nor empty. When a mask
is only partial the field is not being used for rule programming but it
gives a wrong impression it is used. Fix by returning an error on any
partial mask to make it clear they are not supported.
The ip_ver assignment is moved earlier in code to allow using it in
iavf_validate_fdir_fltr_masks.
Fixes: 527691bf06 ("iavf: Support IPv4 Flow Director filters")
Fixes: e90cbc257a ("iavf: Support IPv6 Flow Director filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
On some I219 devices, ethernet cable plugging detection only works once
from PCI D3 state. Subsequent cable plugging does set PME bit correctly,
but device still doesn't get woken up.
Since I219 connects to the root complex directly, it relies on platform
firmware (ACPI) to wake it up. In this case, the GPE from _PRW only
works for first cable plugging but fails to notify the driver for
subsequent plugging events.
The issue was originally found on CNP, but the same issue can be found
on ADL too. So workaround the issue by continuing use PME poll after
first ACPI wake. As PME poll is always used, the runtime suspend
restriction for CNP can also be removed.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit bdfe2da6ae ("e1000e: cosmetic move of function prototypes to the new mac.h")
declared but never implemented them.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230814135821.4808-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 675ad47375 ("e1000: Use netdev_<level>, pr_<level> and dev_<level>")
declared but never implemented e1000_get_hw_dev_name().
Commit 1532ecea1d ("e1000: drop dead pcie code from e1000")
removed e1000_check_mng_mode()/e1000_blink_led_start() but not the declarations.
Commit c46b59b241 ("e1000: Remove unused function e1000_mta_set.")
removed e1000_mta_set() but not its declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
i40e: Replace one-element arrays with flexible-array members
Replace one-element arrays with flexible-array members in multiple
structures.
This results in no differences in binary output.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: Replace one-element array with flex-array member in struct i40e_profile_aq_section
i40e: Replace one-element array with flex-array member in struct i40e_section_table
i40e: Replace one-element array with flex-array member in struct i40e_profile_segment
i40e: Replace one-element array with flex-array member in struct i40e_package_header
====================
Link: https://lore.kernel.org/r/20230810175302.1964182-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One-element and zero-length arrays are deprecated. So, replace
one-element array in struct i40e_profile_aq_section with
flexible-array member.
This results in no differences in binary output.
Link: https://github.com/KSPP/linux/issues/335
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
One-element and zero-length arrays are deprecated. So, replace
one-element array in struct i40e_section_table with flexible-array
member.
This results in no differences in binary output.
Link: https://github.com/KSPP/linux/issues/335
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
One-element and zero-length arrays are deprecated. So, replace
one-element array in struct i40e_profile_segment with flexible-array
member.
This results in no differences in binary output.
Link: https://github.com/KSPP/linux/issues/335
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Tested-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
One-element and zero-length arrays are deprecated. So, replace
one-element array in struct i40e_package_header with flexible-array
member.
The `+ sizeof(u32)` adjustments ensure that there are no differences
in binary output.
Link: https://github.com/KSPP/linux/issues/335
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-07 (ice)
This series contains updates to ice driver only.
Wojciech allows for LAG interfaces to be used for bridge offloads.
Marcin tracks additional metadata for filtering rules to aid in proper
differentiation of similar rules. He also renames some flags that
do not entirely describe their representation.
Karol and Jan add additional waiting for firmware load on devices that
require it.
Przemek refactors RSS implementation to clarify/simplify configurations.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: clean up __ice_aq_get_set_rss_lut()
ice: add FW load wait
ice: Add get C827 PHY index function
ice: Rename enum ice_pkt_flags values
ice: Add direction metadata
ice: Accept LAG netdevs in bridge offloads
====================
Link: https://lore.kernel.org/r/20230807204835.3129164-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add fdir_fltr_lock locking in unprotected places.
The change in iavf_fdir_is_dup_fltr adds a spinlock around a loop which
iterates over all filters and looks for a duplicate. The filter can be
removed from list and freed from memory at the same time it's being
compared. All other places where filters are deleted are already
protected with spinlock.
The remaining changes protect adapter->fdir_active_fltr variable so now
all its uses are under a spinlock.
Fixes: 527691bf06 ("iavf: Support IPv4 Flow Director filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807205011.3129224-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Access to shared variables through hrtimer requires locking in order
to protect the variables because actions to write into these variables
(oper_gate_closed, admin_gate_closed, and qbv_transition) might potentially
occur simultaneously. This patch provides a locking mechanisms to avoid
such scenarios.
Fixes: 175c241288 ("igc: Fix TX Hang issue when QBV Gate is closed")
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230807205129.3129346-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit d73ef2d69c ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length") added the nla_len check in rtnl_bridge_setlink,
which is the only caller for ndo_bridge_setlink handlers defined in
low-level driver codes. Hence, this patch cleanups the redundant checks in
each ndo_bridge_setlink handler function.
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807091347.3804523-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f62b5060d6 ("i40e: fix mac address checking") left behind
i40e_validate_mac_addr() declaration.
Also the other declarations are declared but never implemented in
commit 56a62fc868 ("i40e: init code and hardware support").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230804125525.20244-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor __ice_aq_get_set_rss_lut() to improve reader experience and limit
misuse scenarios (undesired LUT size for given LUT type).
Allow only 3 RSS LUT type+size variants:
PF LUT sized 2048, GLOBAL LUT sized 512, and VSI LUT sized 64, which were
used on default flows prior to this commit.
Prior to the change, code was mixing the meaning of @params->lut_size and
@params->lut_type, flag assigning logic was cryptic, while long defines
made everything harder to follow.
Fix that by extracting some code out to separate helpers.
Drop some of "shift by 0" statements that originated from Intel's
internal HW documentation.
Drop some redundant VSI masks (since ice_is_vsi_valid() gives "valid" for
up to 0x300 VSIs).
After sweeping all the defines out of struct ice_aqc_get_set_rss_lut,
it fits into 7 lines.
Finally apply some cleanup to the callsite
(use of the new enums, tmp var for lengthy bit extraction).
Note that flags for 128 and 64 sized VSI LUT are the same,
and 64 is used everywhere in the code (updated to new enum here), it just
happened that there was 128 in flag name.
__ice_aq_get_set_rss_key() uses the same VSI valid bit, make constant
common for it and __ice_aq_get_set_rss_lut().
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As some cards load FW from external sources, we have to wait
to be sure that FW is ready before setting link up.
Add check and wait for FW readiness
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add a function to find the C827 PHY node handle and return C827 PHY
index for the E810 products.
In order to bring this function to full functionality, some
helpers for this were written by Michal Michalik.
Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
enum ice_pkt_flags contains values such as ICE_PKT_FLAGS_VLAN and
ICE_PKT_FLAGS_TUNNEL, but actually the flags words which they refer to
contain a range of unrelated values - e.g. word 0 (ICE_PKT_FLAGS_VLAN)
contains fields such as from_network and ucast, which have nothing to do
with VLAN. Rename each enum value to ICE_PKT_FLAGS_MDID<number>, so it's
clear in which flags word does some value reside.
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently it is possible to create a filter which breaks TX traffic, e.g.:
tc filter add dev $PF1 ingress protocol ip prio 1 flower ip_proto udp
dst_port $PORT action mirred egress redirect dev $VF1_PR
This adds a rule which might match both TX and RX traffic, and in TX path
the PF will actually receive the traffic, which breaks communication.
To fix this, add a match on direction metadata flag when adding a tc rule.
Because of the way metadata is currently handled, a duplicate lookup word
would appear if VLAN metadata is also added. The lookup would still work
correctly, but one word would be wasted. To prevent it, lookup 0 now always
contains all metadata. When any metadata needs to be added, it is added to
lookup 0 and lookup count is not incremented. This way, two flags residing
in the same word will take up one word, instead of two.
Note: the drop action is also affected, i.e. it will now only work in one
direction.
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Allow LAG interfaces to be used in bridge offload using
netif_is_lag_master. In this case, search for ice netdev in
the list of LAG's lower devices.
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ixgbe_napi_add_all()/ixgbe_napi_del_all() are declared but never implemented in
commit 92915f7120 ("ixgbevf: Driver main and ethool interface module and main header")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230803141904.15316-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRdM/uy1Ege0+EN1fNar9k/UBDW4wUCZMvevwAKCRBar9k/UBDW
42Z0AP90hLZ9OmoghYAlALHLl8zqXuHCV8OeFXR5auqG+kkcCwEAx6h99vnh4zgP
Tngj6Yid60o39/IZXXblhV37HfSiyQ8=
=/kVE
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2023-08-03
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 84 files changed, 4026 insertions(+), 562 deletions(-).
The main changes are:
1) Add SO_REUSEPORT support for TC bpf_sk_assign from Lorenz Bauer,
Daniel Borkmann
2) Support new insns from cpu v4 from Yonghong Song
3) Non-atomically allocate freelist during prefill from YiFei Zhu
4) Support defragmenting IPv(4|6) packets in BPF from Daniel Xu
5) Add tracepoint to xdp attaching failure from Leon Hwang
6) struct netdev_rx_queue and xdp.h reshuffling to reduce
rebuild time from Jakub Kicinski
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
net: invert the netdevice.h vs xdp.h dependency
net: move struct netdev_rx_queue out of netdevice.h
eth: add missing xdp.h includes in drivers
selftests/bpf: Add testcase for xdp attaching failure tracepoint
bpf, xdp: Add tracepoint to xdp attaching failure
selftests/bpf: fix static assert compilation issue for test_cls_*.c
bpf: fix bpf_probe_read_kernel prototype mismatch
riscv, bpf: Adapt bpf trampoline to optimized riscv ftrace framework
libbpf: fix typos in Makefile
tracing: bpf: use struct trace_entry in struct syscall_tp_t
bpf, devmap: Remove unused dtab field from bpf_dtab_netdev
bpf, cpumap: Remove unused cmap field from bpf_cpu_map_entry
netfilter: bpf: Only define get_proto_defrag_hook() if necessary
bpf: Fix an array-index-out-of-bounds issue in disasm.c
net: remove duplicate INDIRECT_CALLABLE_DECLARE of udp[6]_ehashfn
docs/bpf: Fix malformed documentation
bpf: selftests: Add defrag selftests
bpf: selftests: Support custom type and proto for client sockets
bpf: selftests: Support not connecting client socket
netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link
...
====================
Link: https://lore.kernel.org/r/20230803174845.825419-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Handful of drivers currently expect to get xdp.h by virtue
of including netdevice.h. This will soon no longer be the case
so add explicit includes.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230803010230.1755386-2-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Replace uses of i40e_status to as equivalent as possible error codes.
Remove enum i40e_status as it is no longer needed
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230728171336.2446156-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During qdisc create/delete, it is necessary to rebuild the queue
of VSIs. An error occurred because the VSIs created by RDMA were
still active.
Added check if RDMA is active. If yes, it disallows qdisc changes
and writes a message in the system logs.
Fixes: 348048e724 ("ice: Implement iidc operations")
Signed-off-by: Rafal Rogalski <rafalx.rogalski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230728171243.2446101-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As 32bits of dissector->used_keys are exhausted,
increase the size to 64bits.
This is base change for ESP/AH flow dissector patch.
Please find patch and discussions at
https://lore.kernel.org/netdev/ZMDNjD46BvZ5zp5I@corigine.com/T/#t
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Tested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
t-queue
Tony Nguyen says:
====================
ice: Implement support for SRIOV + LAG
Dave Ertman says:
Implement support for SRIOV VF's on interfaces that are in an
aggregate interface.
The first interface added into the aggregate will be flagged as
the primary interface, and this primary interface will be
responsible for managing the VF's resources. VF's created on the
primary are the only VFs that will be supported on the aggregate.
Only Active-Backup mode will be supported and only aggregates whose
primary interface is in switchdev mode will be supported.
The ice-lag DDP must be loaded to support this feature.
Additional restrictions on what interfaces can be added to the aggregate
and still support SRIOV VFs are:
- interfaces have to all be on the same physical NIC
- all interfaces have to have the same QoS settings
- interfaces have to have the FW LLDP agent disabled
- only the primary interface is to be put into switchdev mode
- no more than two interfaces in the aggregate
---
v2:
- Move NULL check for q_ctx in ice_lag_qbuf_recfg() earlier (patch 6)
v1: https://lore.kernel.org/netdev/20230726182141.3797928-1-anthony.l.nguyen@intel.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add code to rebuild the LAG resources when rebuilding the state of the
interface after a reset.
Also added in a function for building per-queue information into the buffer
used to configure VF queues for LAG fail-over. This improves code reuse.
Due to differences in timing per interface for recovering from a reset, add
in the ability to retry on non-local dependencies where needed.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
To support SRIOV LAG, the driver cannot allow changes to an interface's DCB
configuration when in a bond. This would break the ability to modify
interfaces Tx scheduling for fail-over interfaces.
Block kernel generated DCB config events when in a bond.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement checks on what interfaces are eligible for supporting SRIOV VFs
when a member of an aggregate interface.
Implement unwind path for interfaces that become ineligible.
checks for the SRIOV LAG feature bit wrap most of the functional code for
manipulating resources that apply to this feature. Utilize this bit
to track compliant aggregates. Also flag any new entries into the
aggregate as not supporting SRIOV LAG for the time they are in the
non-compliant aggregate.
Once an aggregate has been flagged as non-compliant, only unpopulating the
aggregate and re-populating it will return SRIOV LAG functionality.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Code for supporting removal of the PF driver (NETDEV_UNREGISTER) events for
both when the bond has the primary interface as active and when failed over
to thew secondary interface.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add in the functions that will allow a VF created on the primary interface
of a bond to "fail-over" to another PF interface in the bond and continue
to Tx and Rx.
Add in an ordered take-down path for the bonded interface.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add in the function framework for the processing of LAG events. Also add
in helper function to perform common tasks.
Add the basis of the process of linking a lower netdev to an upper netdev.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The event handler for LAG will create a work item to place on the ordered
workqueue to be processed.
Add in defines for training packets and new recipes to be used by the
switching block of the HW for LAG packet steering.
Update the ice_lag struct to reflect the new processing methodology.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add defines needed for interaction with the FW admin queue interface
in relation to supporting LAG and SRIOV VFs interacting.
Add code, or make non-static previously static functions, to access
the new and changed admin queue calls for LAG.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add the defines, fields, and detection code for FW support of LAG for
SRIOV. Also exposes some previously static functions to allow access
in the lag code.
Clean up code that is unused or not needed for LAG support. Also add
an ordered workqueue for processing LAG events.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_alloc_lan_q_ctx function allocates the queue context array for a
given traffic class. This function uses devm_kcalloc which will
zero-allocate the structure. Thus, prior to any queue being setup by
ice_ena_vsi_txq, the q_ctx structure will have a q_handle of 0 and a q_teid
of 0. These are potentially valid values.
Modify the ice_alloc_lan_q_ctx function to initialize every member of the
q_ctx array to have invalid values. Modify ice_dis_vsi_txq to ensure that
it assigns q_teid to an invalid value when it assigns q_handle to the
invalid value as well.
This will allow other code to check whether the queue context is currently
valid before operating on it.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-07-21 (i40e, iavf)
This series contains updates to i40e and iavf drivers.
Wang Ming corrects an error check on i40e.
Jake unlocks crit_lock on allocation failure to prevent deadlock and
stops re-enabling of interrupts when it's not intended for iavf.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: check for removal state before IAVF_FLAG_PF_COMMS_FAILED
iavf: fix potential deadlock on allocation failure
i40e: Fix an NULL vs IS_ERR() bug for debugfs_create_dir()
====================
Link: https://lore.kernel.org/r/20230721155812.1292752-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix ethtool FDIR logic to not use memory after its release.
In the ice_ethtool_fdir.c file there are 2 spots where code can
refer to pointers which may be missing.
In the ice_cfg_fdir_xtrct_seq() function seg may be freed but
even then may be still used by memcpy(&tun_seg[1], seg, sizeof(*seg)).
In the ice_add_fdir_ethtool() function struct ice_fdir_fltr *input
may first fail to be added via ice_fdir_update_list_entry() but then
may be deleted by ice_fdir_update_list_entry.
Terminate in both cases when the returned value of the previous
operation is other than 0, free memory and don't use it anymore.
Reported-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2208423
Fixes: cac2a27cd9 ("ice: Support IPv4 Flow Director filters")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230721155854.1292805-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tracepoints for the following events:
- Add FDB entry
- Delete FDB entry
- Create bridge VLAN
- Cleanup bridge VLAN
- Link port to the bridge
- Unlink port from the bridge
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove fdb entries always when ageing time expired.
Allow user to set ageing time using port object attribute.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Port VLAN in this case means push and pop VLAN action on specific vid.
There are a few limitation in hardware:
- push and pop can't be used separately
- if port VLAN is used there can't be any trunk VLANs, because pop
action is done on all traffic received by VSI in port VLAN mode
- port VLAN mode on uplink port isn't supported
Reflect these limitations in code using dev_info to inform the user
about unsupported configuration.
In bridge mode there is a need to configure port vlan without resetting
VFs. To do that implement ice_port_vlan_on/off() functions. They are
only configuring correct vlan_ops to allow setting port vlan.
We also need to clear port vlan without resetting the VF which is not
supported right now. Change it by implementing clear_port_vlan ops.
As previous VLAN configuration isn't always the same, store current
config while creating port vlan and restore it in clear function.
Configuration steps:
- configure switchdev with bridge
- #bridge vlan add dev eth0 vid 120 pvid untagged
- #bridge vlan add dev eth1 vid 120 pvid untagged
- ping from VF0 to VF1
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add support for matching on VLAN tag in bridge offloads.
Currently only trunk mode is supported.
To enable VLAN filtering (existing FDB entries will be deleted):
ip link set $BR type bridge vlan_filtering 1
To add VLANs to bridge in trunk mode:
bridge vlan add dev $PF1 vid 110-111
bridge vlan add dev $VF1_PR vid 110-111
Signed-off-by: Marcin Szycik <marcin.szycik@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce new "guard" rule upon FDB entry creation.
It matches on src_mac, has valid bit unset, allow_pass_l2 set
and has a nop action.
Previously introduced "forward" rule matches on dst_mac, has valid
bit set, need_pass_l2 set and has a forward action.
With these rules, a packet will be offloaded only if FDB exists in both
directions (RX and TX).
Let's assume link partner sends a packet to VF1: src_mac = LP_MAC,
dst_mac = is VF1_MAC. Bridge adds FDB, two rules are created:
1. Guard rule matching on src_mac == LP_MAC
2. Forward rule matching on dst_mac == LP_MAC
Now VF1 responds with src_mac = VF1_MAC, dst_mac = LP_MAC. Before this
change, only one rule with dst_mac == LP_MAC would have existed, and the
packet would have been offloaded, meaning the bridge wouldn't add FDB in
the opposite direction. Now, the forward rule matches (dst_mac == LP_MAC),
but it has need_pass_l2 set an there is no guard rule with
src_mac == VF1_MAC, so the packet goes through slow-path and the bridge
adds FDB. Two rules are created:
1. Guard rule matching on src_mac == VF1_MAC
2. Forward rule matching on dst_mac == VF1_MAC
Further packets in both directions will be offloaded.
The same example is true in opposite direction (i.e. VF1 is the first to
send a packet out).
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Marcin Szycik <marcin.szycik@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Listen for SWITCHDEV_FDB_{ADD|DEL}_TO_DEVICE events while in switchdev
mode. Accept these events on both uplink and VF PR ports. Add HW
rules in newly created workqueue. FDB entries are stored in rhashtable
for lookup when removing the entry and in the list for cleanup
purpose. Direction of the HW rule depends on the type of the ports
on which the FDB event was received:
ICE_ESWITCH_BR_UPLINK_PORT:
TX rule that forwards the packet to the LAN (egress).
ICE_ESWITCH_BR_VF_REPR_PORT:
RX rule that forwards the packet to the VF associated
with the port representor.
In both cases the rule matches on the dst mac address.
All the FDB entries are stored in the bridge structure.
When the port is removed all the FDB entries associated with
this port are removed as well. This is achieved thanks to the reference
to the port that FDB entry holds.
In the fwd rule we use only one lookup type (MAC address)
but lkups_cnt variable is already introduced because
we will have more lookups in the subsequent patches.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
With this patch, ice driver is able to track if the port
representors or uplink port were added to the linux bridge in
switchdev mode. Listen for NETDEV_CHANGEUPPER events in order to
detect this. ice_esw_br data structure reflects the linux bridge
and stores all the ports of the bridge (ice_esw_br_port) in
xarray, it's created when the first port is added to the bridge and
freed once the last port is removed. Note that only one bridge is
supported per eswitch.
Bridge port (ice_esw_br_port) can be either a VF port representor
port or uplink port (ice_esw_br_port_type). In both cases bridge port
holds a reference to the VSI, VF's VSI in case of the PR and uplink
VSI in case of the uplink. VSI's index is used as an index to the
xarray in which ports are stored.
Add a check which prevents configuring switchdev mode if uplink is
already added to any bridge. This is needed because we need to listen
for NETDEV_CHANGEUPPER events to record if the uplink was added to
the bridge. Netdevice notifier is registered after eswitch mode
is changed to switchdev.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In switchdev mode uplink VSI is supposed to receive all packets that
were not matched by existing filters. If ICE_AQ_VSI_SW_FLAG_LOCAL_LB
bit is unset and we have a filter associated with uplink VSI
which matches on dst mac equal to MAC1, then packets with src mac equal
to MAC1 will be pruned from reaching uplink VSI.
Fix this by updating uplink VSI with ICE_AQ_VSI_SW_FLAG_LOCAL_LB bit
set when configuring switchdev mode.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In switchdev mode, uplink VSI is configured to be default
VSI which means it will receive all unmatched packets.
In order to receive vlan packets we need to disable vlan pruning
as well. This is done by dis_rx_filtering vlan op.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There is possibility that ice_eswitch_port_start_xmit might be
called while some resources are still not allocated which might
cause NULL pointer dereference. Fix this by checking if switchdev
configuration was finished.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Don't allow to change promisc mode in switchdev mode.
When switchdev is configured, PF netdev is set to be a
default VSI. This is needed for the slow-path to work correctly.
All the unmatched packets will be directed to PF netdev.
It is possible that this setting might be overwritten by
ndo_set_rx_mode. Prevent this by checking if switchdev is
enabled in ice_set_rx_mode.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Advanced rules for ctrl VSI will be removed anyway when the
VSI will cleaned up, no need to do it explicitly.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
VXLAN-GPE does not add an extra inner Ethernet header. Take that into
account when calculating header length.
This causes problems in skb_tunnel_check_pmtu, where incorrect PMTU is
cached.
In the collect_md mode (which is the only mode that VXLAN-GPE
supports), there's no magic auto-setting of the tunnel interface MTU.
It can't be, since the destination and thus the underlying interface
may be different for each packet.
So, the administrator is responsible for setting the correct tunnel
interface MTU. Apparently, the administrators are capable enough to
calculate that the maximum MTU for VXLAN-GPE is (their_lower_MTU - 36).
They set the tunnel interface MTU to 1464. If you run a TCP stream over
such interface, it's then segmented according to the MTU 1464, i.e.
producing 1514 bytes frames. Which is okay, this still fits the lower
MTU.
However, skb_tunnel_check_pmtu (called from vxlan_xmit_one) uses 50 as
the header size and thus incorrectly calculates the frame size to be
1528. This leads to ICMP too big message being generated (locally),
PMTU of 1450 to be cached and the TCP stream to be resegmented.
The fix is to use the correct actual header size, especially for
skb_tunnel_check_pmtu calculation.
Fixes: e1e5314de0 ("vxlan: implement GPE")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In iavf_adminq_task(), if the function can't acquire the
adapter->crit_lock, it checks if the driver is removing. If so, it simply
exits without re-enabling the interrupt. This is done to ensure that the
task stops processing as soon as possible once the driver is being removed.
However, if the IAVF_FLAG_PF_COMMS_FAILED is set, the function checks this
before attempting to acquire the lock. In this case, the function exits
early and re-enables the interrupt. This will happen even if the driver is
already removing.
Avoid this, by moving the check to after the adapter->crit_lock is
acquired. This way, if the driver is removing, we will not re-enable the
interrupt.
Fixes: fc2e6b3b13 ("iavf: Rework mutexes for better synchronisation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In iavf_adminq_task(), if kzalloc() fails to allocate the event.msg_buf,
the function will exit without releasing the adapter->crit_lock.
This is unlikely, but if it happens, the next access to that mutex will
deadlock.
Fix this by moving the unlock to the end of the function, and adding a new
label to allow jumping to the unlock portion of the function exit flow.
Fixes: fc2e6b3b13 ("iavf: Rework mutexes for better synchronisation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The debugfs_create_dir() function returns error pointers.
It never returns NULL. Most incorrect error checks were fixed,
but the one in i40e_dbg_init() was forgotten.
Fix the remaining error check.
Fixes: 02e9c29081 ("i40e: debugfs interface")
Signed-off-by: Wang Ming <machel@vivo.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-----BEGIN PGP SIGNATURE-----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=VRCb
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-07-19
We've added 45 non-merge commits during the last 3 day(s) which contain
a total of 71 files changed, 7808 insertions(+), 592 deletions(-).
The main changes are:
1) multi-buffer support in AF_XDP, from Maciej Fijalkowski,
Magnus Karlsson, Tirthendu Sarkar.
2) BPF link support for tc BPF programs, from Daniel Borkmann.
3) Enable bpf_map_sum_elem_count kfunc for all program types,
from Anton Protopopov.
4) Add 'owner' field to bpf_rb_node to fix races in shared ownership,
Dave Marchevsky.
5) Prevent potential skb_header_pointer() misuse, from Alexei Starovoitov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
bpf, net: Introduce skb_pointer_if_linear().
bpf: sync tools/ uapi header with
selftests/bpf: Add mprog API tests for BPF tcx links
selftests/bpf: Add mprog API tests for BPF tcx opts
bpftool: Extend net dump with tcx progs
libbpf: Add helper macro to clear opts structs
libbpf: Add link-based API for tcx
libbpf: Add opts-based attach/detach/query API for tcx
bpf: Add fd-based tcx multi-prog infra with link support
bpf: Add generic attach/detach/query API for multi-progs
selftests/xsk: reset NIC settings to default after running test suite
selftests/xsk: add test for too many frags
selftests/xsk: add metadata copy test for multi-buff
selftests/xsk: add invalid descriptor test for multi-buffer
selftests/xsk: add unaligned mode test for multi-buffer
selftests/xsk: add basic multi-buffer test
selftests/xsk: transmit and receive multi-buffer packets
xsk: add multi-buffer documentation
i40e: xsk: add TX multi-buffer support
ice: xsk: Tx multi-buffer support
...
====================
Link: https://lore.kernel.org/r/20230719175424.75717-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set eop bit in TX desc command only for the last descriptor of the
packet and do not set for all preceding descriptors.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-17-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Most of this patch is about actually supporting XDP_TX action. Pure Tx
ZC support is only about looking at XDP_PKT_CONTD presence at options
field and based on that generating EOP bit on Tx HW descriptor. This is
that simple due to the implementation on
xsk_tx_peek_release_desc_batch() where we are making sure that last
produced descriptor is an EOP one.
Overwrite xdp_zc_max_segs with a value that defines max scatter-gatter
count on Tx side that HW can handle.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-16-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch is inspired from the multi-buffer support in non-zc path for
i40e as well as from the patch to support zc on ice. Each subsequent
frag is added to skb_shared_info of the first frag for possible xdp_prog
use as well to xsk buffer list for accessing the buffers in af_xdp.
For XDP_PASS, new pages are allocated for frags and contents are copied
from memory backed by xsk_buff_pool.
Replace next_to_clean with next_to_process as done in non-zc path and
advance it for every buffer and change the semantics of next_to_clean to
point to the first buffer of a packet. Driver will use next_to_process
in the same way next_to_clean was used previously.
For the non multi-buffer case, next_to_process and next_to_clean will
always be the same since each packet consists of a single buffer.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-14-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This support is strongly inspired by work that introduced multi-buffer
support to regular Rx data path in ice. There are some differences,
though. When adding a frag, besides adding it to skb_shared_info, use
also fresh xsk_buff_add_frag() helper. Reason for doing both things is
that we can not rule out the fact that AF_XDP pipeline could use XDP
program that needs to access frame fragments. Without them being in
skb_shared_info it will not be possible. Another difference is that
XDP_PASS has to allocate a new pages for each frags and copy contents
from memory backed by xsk_buff_pool.
chain_len that is used for programming HW Rx descriptors no longer has
to be limited to 1 when xsk_pool is present - remove this restriction.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-13-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-07-14 (i40e)
This series contains updates to i40e driver only.
Ivan Vecera adds waiting for VF to complete initialization on VF related
configuration callbacks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-07-17 (iavf)
This series contains updates to iavf driver only.
Ding Hui fixes use-after-free issue by calling netif_napi_del() for all
allocated q_vectors. He also resolves out-of-bounds issue by not
updating to new values when timeout is encountered.
Marcin and Ahmed change the way resets are handled so that the callback
operating under the RTNL lock will wait for the reset to finish, the
rtnl_lock sensitive functions in reset flow will schedule the netdev update
for later in order to remove circular dependency with the critical lock.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: fix reset task race with iavf_remove()
iavf: fix a deadlock caused by rtnl and driver's lock circular dependencies
Revert "iavf: Do not restart Tx queues after reset task failure"
Revert "iavf: Detach device during reset task"
iavf: Wait for reset in callbacks which trigger it
iavf: use internal state to free traffic IRQs
iavf: Fix out-of-bounds when setting channels on remove
iavf: Fix use-after-free in free_netdev
====================
Link: https://lore.kernel.org/r/20230717175205.3217774-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In normal operation, each populated queue item has
next_to_watch pointing to the last TX desc of the packet,
while each cleaned item has it set to 0. In particular,
next_to_use that points to the next (necessarily clean)
item to use has next_to_watch set to 0.
When the TX queue is used both by an application using
AF_XDP with ZEROCOPY as well as a second non-XDP application
generating high traffic, the queue pointers can get in
an invalid state where next_to_use points to an item
where next_to_watch is NOT set to 0.
However, the implementation assumes at several places
that this is never the case, so if it does hold,
bad things happen. In particular, within the loop inside
of igc_clean_tx_irq(), next_to_clean can overtake next_to_use.
Finally, this prevents any further transmission via
this queue and it never gets unblocked or signaled.
Secondly, if the queue is in this garbled state,
the inner loop of igc_clean_tx_ring() will never terminate,
completely hogging a CPU core.
The reason is that igc_xdp_xmit_zc() reads next_to_use
before acquiring the lock, and writing it back
(potentially unmodified) later. If it got modified
before locking, the outdated next_to_use is written
pointing to an item that was already used elsewhere
(and thus next_to_watch got written).
Fixes: 9acf59a752 ("igc: Enable TX via AF_XDP zero-copy")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230717175444.3217831-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add TransmissionOverrun as per defined by IEEE 802.1Q Bridges.
TransmissionOverrun counter shall be incremented if the implementation
detects that a frame from a given queue is still being transmitted by
the MAC when that gate-close event for that queue occurs.
This counter is utilised by the Certification conformance test to
inform the user application whether any packets are currently being
transmitted on a particular queue during a gate-close event.
Intel Discrete I225/I226 have a mechanism to not transmit a packets if
the gate open time is insufficient for the packet transmission by setting
the Strict_End bit. Thus, it is expected for this counter to be always
zero at this moment.
Inspired from enetc_taprio_stats() and enetc_taprio_queue_stats(), now
driver also report the tx_overruns counter per traffic class.
User can get this counter by using below command:
1) tc -s qdisc show dev <interface> root
2) tc -s class show dev <interface>
Test Result (Before):
class mq :1 root
Sent 1289 bytes 20 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class mq :2 root
Sent 124 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class mq :3 root
Sent 46028 bytes 86 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class mq :4 root
Sent 2596 bytes 14 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Test Result (After):
class taprio 100:1 root
Sent 8491 bytes 38 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Transmit overruns: 0
class taprio 100:2 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Transmit overruns: 0
class taprio 100:3 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Transmit overruns: 0
class taprio 100:4 root
Sent 994 bytes 11 pkt (dropped 0, overlimits 0 requeues 1)
backlog 0b 0p requeues 1
Transmit overruns: 0
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230714201428.1718097-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The reset task is currently scheduled from the watchdog or adminq tasks.
First, all direct calls to schedule the reset task are replaced with the
iavf_schedule_reset(), which is modified to accept the flag showing the
type of reset.
To prevent the reset task from starting once iavf_remove() starts, we need
to check the __IAVF_IN_REMOVE_TASK bit before we schedule it. This is now
easily added to iavf_schedule_reset().
Finally, remove the check for IAVF_FLAG_RESET_NEEDED in the watchdog task.
It is redundant since all callers who set the flag immediately schedules
the reset task.
Fixes: 3ccd54ef44 ("iavf: Fix init state closure on remove")
Fixes: 14756b2ae2 ("iavf: Fix __IAVF_RESETTING state usage")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
A driver's lock (crit_lock) is used to serialize all the driver's tasks.
Lockdep, however, shows a circular dependency between rtnl and
crit_lock. This happens when an ndo that already holds the rtnl requests
the driver to reset, since the reset task (in some paths) tries to grab
rtnl to either change real number of queues of update netdev features.
[566.241851] ======================================================
[566.241893] WARNING: possible circular locking dependency detected
[566.241936] 6.2.14-100.fc36.x86_64+debug #1 Tainted: G OE
[566.241984] ------------------------------------------------------
[566.242025] repro.sh/2604 is trying to acquire lock:
[566.242061] ffff9280fc5ceee8 (&adapter->crit_lock){+.+.}-{3:3}, at: iavf_close+0x3c/0x240 [iavf]
[566.242167]
but task is already holding lock:
[566.242209] ffffffff9976d350 (rtnl_mutex){+.+.}-{3:3}, at: iavf_remove+0x6b5/0x730 [iavf]
[566.242300]
which lock already depends on the new lock.
[566.242353]
the existing dependency chain (in reverse order) is:
[566.242401]
-> #1 (rtnl_mutex){+.+.}-{3:3}:
[566.242451] __mutex_lock+0xc1/0xbb0
[566.242489] iavf_init_interrupt_scheme+0x179/0x440 [iavf]
[566.242560] iavf_watchdog_task+0x80b/0x1400 [iavf]
[566.242627] process_one_work+0x2b3/0x560
[566.242663] worker_thread+0x4f/0x3a0
[566.242696] kthread+0xf2/0x120
[566.242730] ret_from_fork+0x29/0x50
[566.242763]
-> #0 (&adapter->crit_lock){+.+.}-{3:3}:
[566.242815] __lock_acquire+0x15ff/0x22b0
[566.242869] lock_acquire+0xd2/0x2c0
[566.242901] __mutex_lock+0xc1/0xbb0
[566.242934] iavf_close+0x3c/0x240 [iavf]
[566.242997] __dev_close_many+0xac/0x120
[566.243036] dev_close_many+0x8b/0x140
[566.243071] unregister_netdevice_many_notify+0x165/0x7c0
[566.243116] unregister_netdevice_queue+0xd3/0x110
[566.243157] iavf_remove+0x6c1/0x730 [iavf]
[566.243217] pci_device_remove+0x33/0xa0
[566.243257] device_release_driver_internal+0x1bc/0x240
[566.243299] pci_stop_bus_device+0x6c/0x90
[566.243338] pci_stop_and_remove_bus_device+0xe/0x20
[566.243380] pci_iov_remove_virtfn+0xd1/0x130
[566.243417] sriov_disable+0x34/0xe0
[566.243448] ice_free_vfs+0x2da/0x330 [ice]
[566.244383] ice_sriov_configure+0x88/0xad0 [ice]
[566.245353] sriov_numvfs_store+0xde/0x1d0
[566.246156] kernfs_fop_write_iter+0x15e/0x210
[566.246921] vfs_write+0x288/0x530
[566.247671] ksys_write+0x74/0xf0
[566.248408] do_syscall_64+0x58/0x80
[566.249145] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[566.249886]
other info that might help us debug this:
[566.252014] Possible unsafe locking scenario:
[566.253432] CPU0 CPU1
[566.254118] ---- ----
[566.254800] lock(rtnl_mutex);
[566.255514] lock(&adapter->crit_lock);
[566.256233] lock(rtnl_mutex);
[566.256897] lock(&adapter->crit_lock);
[566.257388]
*** DEADLOCK ***
The deadlock can be triggered by a script that is continuously resetting
the VF adapter while doing other operations requiring RTNL, e.g:
while :; do
ip link set $VF up
ethtool --set-channels $VF combined 2
ip link set $VF down
ip link set $VF up
ethtool --set-channels $VF combined 4
ip link set $VF down
done
Any operation that triggers a reset can substitute "ethtool --set-channles"
As a fix, add a new task "finish_config" that do all the work which
needs rtnl lock. With the exception of iavf_remove(), all work that
require rtnl should be called from this task.
As for iavf_remove(), at the point where we need to call
unregister_netdevice() (and grab rtnl_lock), we make sure the finish_config
task is not running (cancel_work_sync()) to safely grab rtnl. Subsequent
finish_config work cannot restart after that since the task is guarded
by the __IAVF_IN_REMOVE_TASK bit in iavf_schedule_finish_config().
Fixes: 5ac49f3c27 ("iavf: use mutexes for locking of critical sections")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This reverts commit 08f1c147b7.
Netdev is no longer being detached during reset, so this fix can be
reverted. We leave the removal of "hacky" IFF_UP flag update.
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This reverts commit aa626da947.
Detaching device during reset was not fully fixing the rtnl locking issue,
as there could be a situation where callback was already in progress before
detaching netdev.
Furthermore, detaching netdevice causes TX timeouts if traffic is running.
To reproduce:
ip netns exec ns1 iperf3 -c $PEER_IP -t 600 --logfile /dev/null &
while :; do
for i in 200 7000 400 5000 300 3000 ; do
ip netns exec ns1 ip link set $VF1 mtu $i
sleep 2
done
sleep 10
done
Currently, callbacks such as iavf_change_mtu() wait for the reset.
If the reset fails to acquire the rtnl_lock, they schedule the netdev
update for later while continuing the reset flow. Operations like MTU
changes are performed under the rtnl_lock. Therefore, when the operation
finishes, another callback that uses rtnl_lock can start.
Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There was a fail when trying to add the interface to bonding
right after changing the MTU on the interface. It was caused
by bonding interface unable to open the interface due to
interface being in __RESETTING state because of MTU change.
Add new reset_waitqueue to indicate that reset has finished.
Add waiting for reset to finish in callbacks which trigger hw reset:
iavf_set_priv_flags(), iavf_change_mtu() and iavf_set_ringparam().
We use a 5000ms timeout period because on Hyper-V based systems,
this operation takes around 3000-4000ms. In normal circumstances,
it doesn't take more than 500ms to complete.
Add a function iavf_wait_for_reset() to reuse waiting for reset code and
use it also in iavf_set_channels(), which already waits for reset.
We don't use error handling in iavf_set_channels() as this could
cause the device to be in incorrect state if the reset was scheduled
but hit timeout or the waitng function was interrupted by a signal.
Fixes: 4e5e6b5d9d ("iavf: Fix return of set the new channel count")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Co-developed-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If the system tries to close the netdev while iavf_reset_task() is
running, __LINK_STATE_START will be cleared and netif_running() will
return false in iavf_reinit_interrupt_scheme(). This will result in
iavf_free_traffic_irqs() not being called and a leak as follows:
[7632.489326] remove_proc_entry: removing non-empty directory 'irq/999', leaking at least 'iavf-enp24s0f0v0-TxRx-0'
[7632.490214] WARNING: CPU: 0 PID: 10 at fs/proc/generic.c:718 remove_proc_entry+0x19b/0x1b0
is shown when pci_disable_msix() is later called. Fix by using the
internal adapter state. The traffic IRQs will always exist if
state == __IAVF_RUNNING.
Fixes: 5b36e8d04b ("i40evf: Enable VF to request an alternate queue allocation")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 028daf8011 ("i40e: Fix attach VF to VM issue") fixed
a race between i40e_ndo_set_vf_mac() and i40e_reset_vf() during
an attachment of VF device to VM. This issue is not related to
setting MAC address only but also VLAN assignment to particular
VF because the newer libvirt sets configured MAC address as well
as an optional VLAN. The same behavior is also for i40e's
.ndo_set_vf_rate and .ndo_set_vf_spoofchk where the callbacks
just check if the VF was initialized but not wait for the finish
of pending reset.
Reproducer:
[root@host ~]# virsh attach-interface guest hostdev --managed 0000:02:02.0 --mac 52:54:00:b4:aa:bb
error: Failed to attach interface
error: Cannot set interface MAC/vlanid to 52:54:00:b4:aa:bb/0 for ifname enp2s0f0 vf 0: Resource temporarily unavailable
Fix this issue by using i40e_check_vf_init_timeout() helper to check
whether a reset of particular VF was finished in i40e's
.ndo_set_vf_vlan, .ndo_set_vf_rate and .ndo_set_vf_spoofchk callbacks.
Tested-by: Ma Yuying <yuma@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move the check for VF inited state (with optional up-to 300ms
timeout to separate helper i40e_check_vf_init_timeout() that
will be used in the following commit.
Tested-by: Ma Yuying <yuma@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Since commit 6624e780a5 ("ice: split ice_vsi_setup into smaller
functions") ice_vsi_release does things twice. There is unregister
netdev which is unregistered in ice_deinit_eth also.
It also unregisters the devlink_port twice which is also unregistered
in ice_deinit_eth(). This double deregistration is hidden because
devl_port_unregister ignores the return value of xa_erase.
[ 68.642167] Call Trace:
[ 68.650385] ice_devlink_destroy_pf_port+0xe/0x20 [ice]
[ 68.655656] ice_vsi_release+0x445/0x690 [ice]
[ 68.660147] ice_deinit+0x99/0x280 [ice]
[ 68.664117] ice_remove+0x1b6/0x5c0 [ice]
[ 171.103841] Call Trace:
[ 171.109607] ice_devlink_destroy_pf_port+0xf/0x20 [ice]
[ 171.114841] ice_remove+0x158/0x270 [ice]
[ 171.118854] pci_device_remove+0x3b/0xc0
[ 171.122779] device_release_driver_internal+0xc7/0x170
[ 171.127912] driver_detach+0x54/0x8c
[ 171.131491] bus_remove_driver+0x77/0xd1
[ 171.135406] pci_unregister_driver+0x2d/0xb0
[ 171.139670] ice_module_exit+0xc/0x55f [ice]
Fixes: 6624e780a5 ("ice: split ice_vsi_setup into smaller functions")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The insertion of an empty frame was introduced with
commit db0b124f02 ("igc: Enhance Qbv scheduling by using first flag bit")
in order to ensure that the current cycle has at least one packet if
there is some packet to be scheduled for the next cycle.
However, the current implementation does not properly check if
a packet is already scheduled for the current cycle. Currently,
an empty packet is always inserted if and only if
txtime >= end_of_cycle && txtime > last_tx_cycle
but since last_tx_cycle is always either the end of the current
cycle (end_of_cycle) or the end of a previous cycle, the
second part (txtime > last_tx_cycle) is always true unless
txtime == last_tx_cycle.
What actually needs to be checked here is if the last_tx_cycle
was already written within the current cycle, so an empty frame
should only be inserted if and only if
txtime >= end_of_cycle && end_of_cycle > last_tx_cycle.
This patch does not only avoid an unnecessary insertion, but it
can actually be harmful to insert an empty packet if packets
are already scheduled in the current cycle, because it can lead
to a situation where the empty packet is actually processed
as the first packet in the upcoming cycle shifting the packet
with the first_flag even one cycle into the future, finally leading
to a TX hang.
The TX hang can be reproduced on a i225 with:
sudo tc qdisc replace dev enp1s0 parent root handle 100 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x1 \
txtime-delay 500000 \
clockid CLOCK_TAI
sudo tc qdisc replace dev enp1s0 parent 100:1 etf \
clockid CLOCK_TAI \
delta 500000 \
offload \
skip_sock_check
and traffic generator
sudo trafgen -i traffic.cfg -o enp1s0 --cpp -n0 -q -t1400ns
with traffic.cfg
#define ETH_P_IP 0x0800
{
/* Ethernet Header */
0x30, 0x1f, 0x9a, 0xd0, 0xf0, 0x0e, # MAC Dest - adapt as needed
0x24, 0x5e, 0xbe, 0x57, 0x2e, 0x36, # MAC Src - adapt as needed
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 48, 1, # IP Src - adapt as needed
10, 0, 48, 10, # IP Dest - adapt as needed
const16(5555), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
and the observed message with that is for example
igc 0000:01:00.0 enp1s0: Detected Tx Unit Hang
Tx Queue <0>
TDH <32>
TDT <3c>
next_to_use <3c>
next_to_clean <32>
buffer_info[next_to_clean]
time_stamp <ffff26a8>
next_to_watch <00000000632a1828>
jiffies <ffff27f8>
desc.status <1048000>
Fixes: db0b124f02 ("igc: Enhance Qbv scheduling by using first flag bit")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It is possible (verified on a running system) that frames are processed
by igc_tx_launchtime with a txtime before the start of the cycle
(baset_est).
However, the result of txtime - baset_est is written into a u32,
leading to a wrap around to a positive number. The following
launchtime > 0 check will only branch to executing launchtime = 0
if launchtime is already 0.
Fix it by using a s32 before checking launchtime > 0.
Fixes: db0b124f02 ("igc: Enhance Qbv scheduling by using first flag bit")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The flags IGC_TXQCTL_STRICT_CYCLE and IGC_TXQCTL_STRICT_END
prevent the packet transmission over slot and cycle boundaries.
This is important for taprio offload where the slots and
cycles correspond to the slots and cycles configured for the
network.
However, the Qbv offload feature of the i225 is also used for
enabling TX launchtime / ETF offload. In that case, however,
the cycle has no meaning for the network and is only used
internally to adapt the base time register after a second has
passed.
Enabling strict mode in this case would unnecessarily prevent
the transmission of certain packets (i.e. at the boundary of a
second) and thus interferes with the ETF qdisc that promises
transmission at a certain point in time.
Similar to ETF, this also applies to CBS offload that also should
not be influenced by strict mode unless taprio offload would be
enabled at the same time.
This fully reverts
commit d8f45be01d ("igc: Use strict cycles for Qbv scheduling")
but its commit message only describes what was already implemented
before that commit. The difference to a plain revert of that commit
is that it now copes with the base_time = 0 case that was fixed with
commit e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
In particular, enabling strict mode leads to TX hang situations
under high traffic if taprio is applied WITHOUT taprio offload
but WITH ETF offload, e.g. as in
sudo tc qdisc replace dev enp1s0 parent root handle 100 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x1 \
txtime-delay 500000 \
clockid CLOCK_TAI
sudo tc qdisc replace dev enp1s0 parent 100:1 etf \
clockid CLOCK_TAI \
delta 500000 \
offload \
skip_sock_check
and traffic generator
sudo trafgen -i traffic.cfg -o enp1s0 --cpp -n0 -q -t1400ns
with traffic.cfg
#define ETH_P_IP 0x0800
{
/* Ethernet Header */
0x30, 0x1f, 0x9a, 0xd0, 0xf0, 0x0e, # MAC Dest - adapt as needed
0x24, 0x5e, 0xbe, 0x57, 0x2e, 0x36, # MAC Src - adapt as needed
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 48, 1, # IP Src - adapt as needed
10, 0, 48, 10, # IP Dest - adapt as needed
const16(5555), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
and the observed message with that is for example
igc 0000:01:00.0 enp1s0: Detected Tx Unit Hang
Tx Queue <0>
TDH <d0>
TDT <f0>
next_to_use <f0>
next_to_clean <d0>
buffer_info[next_to_clean]
time_stamp <ffff661f>
next_to_watch <00000000245a4efb>
jiffies <ffff6e48>
desc.status <1048000>
Fixes: d8f45be01d ("igc: Use strict cycles for Qbv scheduling")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Since commit e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
it is possible to enable taprio offload with a basetime of 0.
However, the check if taprio offload is already enabled (and thus -EALREADY
should be returned for igc_save_qbv_schedule) still relied on
adapter->base_time > 0.
This can be reproduced as follows:
# TAPRIO offload (flags == 0x2) and base-time = 0
sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x2
# The second call should fail with "Error: Device failed to setup taprio offload."
# But that only happens if base-time was != 0
sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x2
Fixes: e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Only set adapter->taprio_offload_enable after validating the arguments.
Otherwise, it stays set even if the offload was not enabled.
Since the subsequent code does not get executed in case of invalid
arguments, it will not be read at first.
However, by activating and then deactivating another offload
(e.g. ETF/TX launchtime offload), taprio_offload_enable is read
and erroneously keeps the offload feature of the NIC enabled.
This can be reproduced as follows:
# TAPRIO offload (flags == 0x2) and negative base-time leading to expected -ERANGE
sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time -1000 \
sched-entry S 01 300000 \
flags 0x2
# IGC_TQAVCTRL is 0x0 as expected (iomem=relaxed for reading register)
sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1
# Activate ETF offload
sudo tc qdisc replace dev enp1s0 parent root handle 6666 mqprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
hw 0
sudo tc qdisc add dev enp1s0 parent 6666:1 etf \
clockid CLOCK_TAI \
delta 500000 \
offload
# IGC_TQAVCTRL is 0x9 as expected
sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1
# Deactivate ETF offload again
sudo tc qdisc delete dev enp1s0 parent 6666:1
# IGC_TQAVCTRL should now be 0x0 again, but is observed as 0x9
sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1
Fixes: e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In the current implementation the flags adapter->qbv_enable
and IGC_FLAG_TSN_QBV_ENABLED have a similar name, but do not
have the same meaning. The first one is used only to indicate
taprio offload (i.e. when igc_save_qbv_schedule was called),
while the second one corresponds to the Qbv mode of the hardware.
However, the second one is also used to support the TX launchtime
feature, i.e. ETF qdisc offload. This leads to situations where
adapter->qbv_enable is false, but the flag IGC_FLAG_TSN_QBV_ENABLED
is set. This is prone to confusion.
The rename should reduce this confusion. Since it is a pure
rename, it has no impact on functionality.
Fixes: e17090eb24 ("igc: allow BaseTime 0 enrollment for Qbv")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-07-05 (igc)
This series contains updates to igc driver only.
Husaini adds check to increment Qbv change error counter only on taprio
Qbvs. He also removes delay during Tx ring configuration and
resolves Tx hang that could occur when transmitting on a gate to be
closed.
Prasad Koya reports ethtool link mode as TP (twisted pair).
Tee Min corrects value for max SDU.
Aravindhan ensures that registers for PPS are always programmed to occur
in future.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
I225/6 hardware can be programmed to start PPS output once
the time in Target Time registers is reached. The time
programmed in these registers should always be into future.
Only then PPS output is triggered when SYSTIM register
reaches the programmed value. There are two modes in i225/6
hardware to program PPS, pulse and clock mode.
There were issues reported where PPS is not generated when
start time is in past.
Example 1, "echo 0 0 0 2 0 > /sys/class/ptp/ptp0/period"
In the current implementation, a value of '0' is programmed
into Target time registers and PPS output is in pulse mode.
Eventually an interrupt which is triggered upon SYSTIM
register reaching Target time is not fired. Thus no PPS
output is generated.
Example 2, "echo 0 0 0 1 0 > /sys/class/ptp/ptp0/period"
Above case, a value of '0' is programmed into Target time
registers and PPS output is in clock mode. Here, HW tries to
catch-up the current time by incrementing Target Time
register. This catch-up time seem to vary according to
programmed PPS period time as per the HW design. In my
experiments, the delay ranged between few tens of seconds to
few minutes. The PPS output is only generated after the
Target time register reaches current time.
In my experiments, I also observed PPS stopped working with
below test and could not recover until module is removed and
loaded again.
1) echo 0 <future time> 0 1 0 > /sys/class/ptp/ptp1/period
2) echo 0 0 0 1 0 > /sys/class/ptp/ptp1/period
3) echo 0 0 0 1 0 > /sys/class/ptp/ptp1/period
After this PPS did not work even if i re-program with proper
values. I could only get this back working by reloading the
driver.
This patch takes care of calculating and programming
appropriate future time value into Target Time registers.
Fixes: 5e91c72e56 ("igc: Fix PPS delta between two synchronized end-points")
Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
IEEE 802.1Q does not have clear definitions of what constitutes an
SDU (Service Data Unit), but IEEE Std 802.3 clause 3.1.2 does define
the MAC service primitives and clause 3.2.7 does define the MAC Client
Data for Q-tagged frames.
It shows that the mac_service_data_unit (MSDU) does NOT contain the
preamble, destination and source address, or FCS. The MSDU does contain
the length/type field, MAC client data, VLAN tag and any padding
data (prior to the FCS).
Thus, the maximum 802.3 frame size that is allowed to be transmitted
should be QueueMaxSDU (MSDU) + 16 (6 byte SA + 6 byte DA + 4 byte FCS).
Fixes: 92a0dcb842 ("igc: offload queue max SDU from tc-taprio")
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
set TP bit in the 'supported' and 'advertising' fields. i225/226 parts
only support twisted pair copper.
Fixes: 8c5ad0dae9 ("igc: Add ethtool support")
Signed-off-by: Prasad Koya <prasad@arista.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If a user schedules a Gate Control List (GCL) to close one of
the QBV gates while also transmitting a packet to that closed gate,
TX Hang will be happen. HW would not drop any packet when the gate
is closed and keep queuing up in HW TX FIFO until the gate is re-opened.
This patch implements the solution to drop the packet for the closed
gate.
This patch will also reset the adapter to perform SW initialization
for each 1st Gate Control List (GCL) to avoid hang.
This is due to the HW design, where changing to TSN transmit mode
requires SW initialization. Intel Discrete I225/6 transmit mode
cannot be changed when in dynamic mode according to Software User
Manual Section 7.5.2.1. Subsequent Gate Control List (GCL) operations
will proceed without a reset, as they already are in TSN Mode.
Step to reproduce:
DUT:
1) Configure GCL List with certain gate close.
BASE=$(date +%s%N)
tc qdisc replace dev $IFACE parent root handle 100 taprio \
num_tc 4 \
map 0 1 2 3 3 3 3 3 3 3 3 3 3 3 3 3 \
queues 1@0 1@1 1@2 1@3 \
base-time $BASE \
sched-entry S 0x8 500000 \
sched-entry S 0x4 500000 \
flags 0x2
2) Transmit the packet to closed gate. You may use udp_tai
application to transmit UDP packet to any of the closed gate.
./udp_tai -i <interface> -P 100000 -p 90 -c 1 -t <0/1> -u 30004
Fixes: ec50a9d437 ("igc: Add support for taprio offloading")
Co-developed-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Tested-by: Chwee Lin Choong <chwee.lin.choong@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove unnecessary delay during the TX ring configuration.
This will cause delay, especially during link down and
link up activity.
Furthermore, old SKUs like as I225 will call the reset_adapter
to reset the controller during TSN mode Gate Control List (GCL)
setting. This will add more time to the configuration of the
real-time use case.
It doesn't mentioned about this delay in the Software User Manual.
It might have been ported from legacy code I210 in the past.
Fixes: 13b5b7fd6a ("igc: Add support for Tx/Rx rings")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add condition to increase the qbv counter during taprio qbv
configuration only.
There might be a case when TC already been setup then user configure
the ETF/CBS qdisc and this counter will increase if no condition above.
Fixes: ae4fe46983 ("igc: Add qbv_config_change_errors counter")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Configuring tx_maxrate via sysfs interface
/sys/class/net/eth0/queues/tx-1/tx_maxrate was not working when
TCs are configured because always main VSI was being used. Fix by
using correct VSI in ice_set_tx_maxrate when TCs are configured.
Fixes: 1ddef455f4 ("ice: Add NDO callback to set the maximum per-queue bitrate")
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove incorrect check in ice_validate_mqprio_opt() that limits
filter configuration when sum of max_rates of all TCs exceeds
the link speed. The max rate of each TC is unrelated to value
used by other TCs and is valid as long as it is less than link
speed.
Fixes: fbc7b27af0 ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members
-----BEGIN PGP SIGNATURE-----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=s0j1
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"There are three areas of note:
A bunch of strlcpy()->strscpy() conversions ended up living in my tree
since they were either Acked by maintainers for me to carry, or got
ignored for multiple weeks (and were trivial changes).
The compiler option '-fstrict-flex-arrays=3' has been enabled
globally, and has been in -next for the entire devel cycle. This
changes compiler diagnostics (though mainly just -Warray-bounds which
is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
coverage. In other words, there are no new restrictions, just
potentially new warnings. Any new FORTIFY warnings we've seen have
been fixed (usually in their respective subsystem trees). For more
details, see commit df8fc4e934.
The under-development compiler attribute __counted_by has been added
so that we can start annotating flexible array members with their
associated structure member that tracks the count of flexible array
elements at run-time. It is possible (likely?) that the exact syntax
of the attribute will change before it is finalized, but GCC and Clang
are working together to sort it out. Any changes can be made to the
macro while we continue to add annotations.
As an example of that last case, I have a treewide commit waiting with
such annotations found via Coccinelle:
https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b
Also see commit dd06e72e68 for more details.
Summary:
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex
arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members"
* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
netfilter: ipset: Replace strlcpy with strscpy
uml: Replace strlcpy with strscpy
um: Use HOST_DIR for mrproper
kallsyms: Replace all non-returning strlcpy with strscpy
sh: Replace all non-returning strlcpy with strscpy
of/flattree: Replace all non-returning strlcpy with strscpy
sparc64: Replace all non-returning strlcpy with strscpy
Hexagon: Replace all non-returning strlcpy with strscpy
kobject: Use return value of strreplace()
lib/string_helpers: Change returned value of the strreplace()
jbd2: Avoid printing outside the boundary of the buffer
checkpatch: Check for 0-length and 1-element arrays
riscv/purgatory: Do not use fortified string functions
s390/purgatory: Do not use fortified string functions
x86/purgatory: Do not use fortified string functions
acpi: Replace struct acpi_table_slit 1-element array with flex-array
clocksource: Replace all non-returning strlcpy with strscpy
string: use __builtin_memcpy() in strlcpy/strlcat
staging: most: Replace all non-returning strlcpy with strscpy
drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
...
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-06-22 (ice)
This series contains updates to ice driver only.
Jake adds a slight wait on control queue send to reduce wait time for
responses that occur within normal times.
Maciej allows for hot-swapping XDP programs.
Przemek removes unnecessary checks when enabling SR-IOV and freeing
allocated memory.
Christophe Jaillet converts a managed memory allocation to a regular one.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: use ice_down_up() where applicable
ice: Remove managed memory usage in ice_get_fw_log_cfg()
ice: remove null checks before devm_kfree() calls
ice: clean up freeing SR-IOV VFs
ice: allow hot-swapping XDP programs
ice: reduce initial wait for control queue messages
====================
Link: https://lore.kernel.org/r/20230622183601.2406499-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-06-22 (iavf)
This series contains updates to iavf driver only.
Przemek defers removing, previous, primary MAC address until after
getting result of adding its replacement. He also does some cleanup by
removing unused functions and making applicable functions static.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: make functions static where possible
iavf: remove some unused functions and pointless wrappers
iavf: fix err handling for MAC replace
====================
Link: https://lore.kernel.org/r/20230622165914.2203081-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a setup where a Thunderbolt hub connects to Ethernet and a display
through USB Type-C, users may experience a hung task timeout when they
remove the cable between the PC and the Thunderbolt hub.
This is because the igb_down function is called multiple times when
the Thunderbolt hub is unplugged. For example, the igb_io_error_detected
triggers the first call, and the igb_remove triggers the second call.
The second call to igb_down will block at napi_synchronize.
Here's the call trace:
__schedule+0x3b0/0xddb
? __mod_timer+0x164/0x5d3
schedule+0x44/0xa8
schedule_timeout+0xb2/0x2a4
? run_local_timers+0x4e/0x4e
msleep+0x31/0x38
igb_down+0x12c/0x22a [igb 6615058754948bfde0bf01429257eb59f13030d4]
__igb_close+0x6f/0x9c [igb 6615058754948bfde0bf01429257eb59f13030d4]
igb_close+0x23/0x2b [igb 6615058754948bfde0bf01429257eb59f13030d4]
__dev_close_many+0x95/0xec
dev_close_many+0x6e/0x103
unregister_netdevice_many+0x105/0x5b1
unregister_netdevice_queue+0xc2/0x10d
unregister_netdev+0x1c/0x23
igb_remove+0xa7/0x11c [igb 6615058754948bfde0bf01429257eb59f13030d4]
pci_device_remove+0x3f/0x9c
device_release_driver_internal+0xfe/0x1b4
pci_stop_bus_device+0x5b/0x7f
pci_stop_bus_device+0x30/0x7f
pci_stop_bus_device+0x30/0x7f
pci_stop_and_remove_bus_device+0x12/0x19
pciehp_unconfigure_device+0x76/0xe9
pciehp_disable_slot+0x6e/0x131
pciehp_handle_presence_or_link_change+0x7a/0x3f7
pciehp_ist+0xbe/0x194
irq_thread_fn+0x22/0x4d
? irq_thread+0x1fd/0x1fd
irq_thread+0x17b/0x1fd
? irq_forced_thread_fn+0x5f/0x5f
kthread+0x142/0x153
? __irq_get_irqchip_state+0x46/0x46
? kthread_associate_blkcg+0x71/0x71
ret_from_fork+0x1f/0x30
In this case, igb_io_error_detected detaches the network interface
and requests a PCIE slot reset, however, the PCIE reset callback is
not being invoked and thus the Ethernet connection breaks down.
As the PCIE error in this case is a non-fatal one, requesting a
slot reset can be avoided.
This patch fixes the task hung issue and preserves Ethernet
connection by ignoring non-fatal PCIE errors.
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230620174732.4145155-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ice_change_mtu() is currently using a separate ice_down() and ice_up()
calls to reflect changed MTU. ice_down_up() serves this purpose, so do
the refactoring here.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There is no need to use managed memory allocation here. The memory is
released at the end of the function.
Use kzalloc()/kfree() to simplify the code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We all know they are redundant.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The check for existing VFs was redundant since very
inception of SR-IOV sysfs interface in the kernel,
see commit 1789382a72 ("PCI: SRIOV control and status via sysfs").
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently ice driver's .ndo_bpf callback brings interface down and up
independently of XDP resources' presence. This is only needed when
either these resources have to be configured or removed. It means that
if one is switching XDP programs on-the-fly with running traffic,
packets will be dropped.
To avoid this, compare early on ice_xdp_setup_prog() state of incoming
bpf_prog pointer vs the bpf_prog pointer that is already assigned to
VSI. Do the swap in case VSI has bpf_prog and incoming one are non-NULL.
Lastly, while at it, put old bpf_prog *after* the update of Rx ring's
bpf_prog pointer. In theory previous code could expose us to a state
where Rx ring's bpf_prog would still be referring to old_prog that got
released with earlier bpf_prog_put().
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_sq_send_cmd() function is used to send messages to the control
queues used to communicate with firmware, virtual functions, and even some
hardware.
When sending a control queue message, the driver is designed to
synchronously wait for a response from the queue. Currently it waits
between checks for 100 to 150 microseconds.
Commit f86d6f9c49 ("ice: sleep, don't busy-wait, for
ICE_CTL_Q_SQ_CMD_TIMEOUT") did recently change the behavior from an
unnecessary delay into a sleep which is a significant improvement over the
old behavior of polling using udelay.
Because of the nature of PCIe transactions, the hardware won't be informed
about a new message until the write to the tail register posts. This is
only guaranteed to occur at the next register read. In ice_sq_send_cmd(),
this happens at the ice_sq_done() call. Because of this, the driver
essentially forces a minimum of one full wait time regardless of how fast
the response is.
For the hardware-based sideband queue, this is especially slow. It is
expected that the hardware will respond within 2 or 3 microseconds, an
order of magnitude faster than the 100-150 microsecond sleep.
Allow such fast completions to occur without delay by introducing a small 5
microsecond delay first before entering the sleeping timeout loop. Ensure
the tail write has been posted by using ice_flush(hw) first.
While at it, lets also remove the ICE_CTL_Q_SQ_CMD_USEC macro as it
obscures the sleep time in the inner loop. It was likely introduced to
avoid "magic numbers", but in practice sleep and delay values are easier to
read and understand when using actual numbers instead of a named constant.
This change should allow the fast hardware based control queue messages to
complete quickly without delay, while slower firmware queue response times
will sleep while waiting for the response.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Make all possible functions static.
Move iavf_force_wb() up to avoid forward declaration.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Defer removal of current primary MAC until a replacement is successfully
added. Previous implementation would left filter list with no primary MAC.
This was found while reading the code.
The patch takes advantage of the fact that there can only be a single primary
MAC filter at any time ([1] by Piotr)
Piotr has also applied some review suggestions during our internal patch
submittal process.
[1] https://lore.kernel.org/netdev/20230614145302.902301-2-piotrx.gardocki@intel.com/
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There's an hardware issue that can cause missing timestamps. The bug
is that the interrupt is only cleared if the IGC_TXSTMPH_0 register is
read.
The bug can cause a race condition if a timestamp is captured at the
wrong time, and we will miss that timestamp. To reduce the time window
that the problem is able to happen, in case no timestamp was ready, we
read the "previous" value of the timestamp registers, and we compare
with the "current" one, if it didn't change we can be reasonably sure
that no timestamp was captured. If they are different, we use the new
value as the captured timestamp.
The HW bug is not easy to reproduce, got to reproduce it when smashing
the NIC with timestamping requests from multiple applications (e.g.
multiple ntpperf instances + ptp4l), after 10s of minutes.
This workaround has more impact when multiple timestamp registers are
used, and the IGC_TXSTMPH_0 register always need to be read, so the
interrupt is cleared.
Fixes: 2c344ae245 ("igc: Add support for TX timestamping")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Before requesting a packet transmission to be hardware timestamped,
check if the user has TX timestamping enabled. Fixes an issue that if
a packet was internally forwarded to the NIC, and it had the
SKBTX_HW_TSTAMP flag set, the driver would mark that timestamp as
skipped.
In reality, that timestamp was "not for us", as TX timestamp could
never be enabled in the NIC.
Checking if the TX timestamping is enabled earlier has a secondary
effect that when TX timestamping is disabled, there's no need to check
for timestamp timeouts.
We should only take care to free any pending timestamp when TX
timestamping is disabled, as that skb would never be released
otherwise.
Fixes: 2c344ae245 ("igc: Add support for TX timestamping")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, the igc driver supports timestamping only one tx packet at a
time. During the transmission flow, the skb that requires hardware
timestamping is saved in adapter->ptp_tx_skb. Once hardware has the
timestamp, an interrupt is delivered, and adapter->ptp_tx_work is
scheduled. In igc_ptp_tx_work(), we read the timestamp register, update
adapter->ptp_tx_skb, and notify the network stack.
While the thread executing the transmission flow (the user process
running in kernel mode) and the thread executing ptp_tx_work don't
access adapter->ptp_tx_skb concurrently, there are two other places
where adapter->ptp_tx_skb is accessed: igc_ptp_tx_hang() and
igc_ptp_suspend().
igc_ptp_tx_hang() is executed by the adapter->watchdog_task worker
thread which runs periodically so it is possible we have two threads
accessing ptp_tx_skb at the same time. Consider the following scenario:
right after __IGC_PTP_TX_IN_PROGRESS is set in igc_xmit_frame_ring(),
igc_ptp_tx_hang() is executed. Since adapter->ptp_tx_start hasn't been
written yet, this is considered a timeout and adapter->ptp_tx_skb is
cleaned up.
This patch fixes the issue described above by adding the ptp_tx_lock to
protect access to ptp_tx_skb and ptp_tx_start fields from igc_adapter.
Since igc_xmit_frame_ring() called in atomic context by the networking
stack, ptp_tx_lock is defined as a spinlock, and the irq safe variants
of lock/unlock are used.
With the introduction of the ptp_tx_lock, the __IGC_PTP_TX_IN_PROGRESS
flag doesn't provide much of a use anymore so this patch gets rid of it.
Fixes: 2c344ae245 ("igc: Add support for TX timestamping")
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The check has been moved to core. The ndo_set_mac_address callback
is not being called with new MAC address equal to the old one anymore.
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The check has been moved to core. The ndo_set_mac_address callback
is not being called with new MAC address equal to the old one anymore.
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add error handling into igb_set_eeprom() function, in case
nvm.ops.read() fails just quit with error code asap.
Fixes: 9d5c824399 ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Guarantee that when probe() is run again, PTM and PCI busmaster will be
in the same state as it was if the driver was never loaded.
Avoid an i225/i226 hardware issue that PTM requests can be made even
though PCI bus mastering is not enabled. These unexpected PTM requests
can crash some systems.
So, "force" disable PTM and busmastering before removing the driver,
so they can be re-enabled in the right order during probe(). This is
more like a workaround and should be applicable for i225 and i226, in
any platform.
Fixes: 1b5d73fb86 ("igc: Enable PCIe PTM")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
ice: Improve miscellaneous interrupt code
Jacob Keller says:
This series improves the driver's use of the threaded IRQ and the
communication between ice_misc_intr() and the ice_misc_intr_thread_fn()
which was previously introduced by commit 1229b33973 ("ice: Add low
latency Tx timestamp read").
First, a new custom enumerated return value is used instead of a boolean for
ice_ptp_process_ts(). This significantly reduces the cognitive burden when
reviewing the logic for this function, as the expected action is clear from
the return value name.
Second, the unconditional loop in ice_misc_intr_thread_fn() is removed,
replacing it with a write to the Other Interrupt Cause register. This causes
the MAC to trigger the Tx timestamp interrupt again. This makes it possible
to safely use the ice_misc_intr_thread_fn() to handle other tasks beyond
just the Tx timestamps. It is also easier to reason about since the thread
function will exit cleanly if we do something like disable the interrupt and
call synchronize_irq().
Third, refactor the handling for external timestamp events to use the
miscellaneous thread function. This resolves an issue with the external
time stamps getting blocked while processing the periodic work function
task.
Fourth, a simplification of the ice_misc_intr() function to always return
IRQ_WAKE_THREAD, and schedule the ice service task in the
ice_misc_intr_thread_fn() instead.
Finally, the Other Interrupt Cause is kept disabled over the thread function
processing, rather than immediately re-enabled.
Special thanks to Michal Schmidt for the careful review of the series and
pointing out my misunderstandings of the kernel IRQ code. It has been
determined that the race outlined as being fixed in previous series was
actually introduced by this series itself, which I've since corrected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-06-08 (ice)
This series contains updates to ice driver only.
Simon Horman stops null pointer dereference for GNSS error path.
Kamil fixes memory leak when downing interface when XDP is enabled.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix XDP memory leak when NIC is brought up and down
ice: Don't dereference NULL in ice_gnss_read error path
====================
Link: https://lore.kernel.org/r/20230608200051.451752-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable more than 32 IRQs by removing the u32 bit mask in
iavf_irq_enable_queues(). There is no need for the mask as there are no
callers that select individual IRQs through the bitmask. Also, if the PF
allocates more than 32 IRQs, this mask will prevent us from using all of
them.
Modify the comment in iavf_register.h to show that the maximum number
allowed for the IRQ index is 63 as per the iAVF standard 1.0 [1].
link: [1] https://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ethernet-adaptive-virtual-function-hardware-spec.pdf
Fixes: 5eae00c57f ("i40evf: main driver core")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230608200226.451861-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
82580/i354/i350 features circle-counter-like timestamp registers
that are different with newer i210. The EXTTS capture value in
AUXTSMPx should be converted from raw circle counter value to
timestamp value in resolution of 1 nanosec by the driver.
This issue can be reproduced on i350 nics, connecting an 1PPS
signal to a SDP pin, and run 'ts2phc' command to read external
1PPS timestamp value. On i210 this works fine, but on i350 the
extts is not correctly converted.
The i350/i354/82580's SYSTIM and other timestamp registers are
40bit counters, presenting time range of 2^40 ns, that means these
registers overflows every about 1099s. This causes all these regs
can't be used directly in contrast to the newer i210/i211s.
The igb driver needs to convert these raw register values to
valid time stamp format by using kernel timecounter apis for i350s
families. Here the igb_extts() just forgot to do the convert.
Fixes: 38970eac41 ("igb: support EXTTS on 82580/i354/i350")
Signed-off-by: Yuezhen Luan <eggcar.luan@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230607164116.3768175-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice driver uses threaded IRQ for managing Tx timestamps via the
devm_request_threaded_irq() interface. The ice_misc_intr() handler function
is responsible for processing the hard interrupt context, and can wake the
ice_misc_intr_thread_fn() by returning IRQ_WAKE_THREAD.
The request_threaded_irq() function comment says:
@handler is still called in hard interrupt context and has to check
whether the interrupt originates from the device. If yes, it needs to
disable the interrupt on the device and return IRQ_WAKE_THREAD which will
wake up the handler thread and run the @thread_fn.
We currently re-enable the Other Interrupt Cause Register (OCIR) at the end of
ice_misc_intr(). In practice, this seems to be ok, but it can make
communicating between the handler function and the thread function
difficult. This is because the interrupt can trigger again while the thread
function is still processing.
Move the OICR update to the end of the thread function, leaving the other
interrupt cause disabled in hardware until we complete one pass of the
thread function. This prevents the miscellaneous interrupt from firing
until after we finish the thread function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In ice_misc_intr_thread_fn(), if we do not complete all Tx timestamp work,
the thread function will poll continuously forever.
For E822 hardware, this wastes time as the return value from
ice_ptp_process_ts() is accurate and always reports correctly that the PHY
actually has new timestamp data.
In addition, if we receive enough timestamps with the right pacing, we may
never exit this polling. Should this occur, other tasks handled by the
ice_misc_intr_thread_fn() will never be processed.
Fix this by instead writing to PFINT_OICR, causing an emulated interrupt to
be triggered immediately. This does take slightly more processing than just
re-checking the timestamps. However, it allows all of the other interrupt
causes a chance to be processed first in the hard IRQ function.
Note that the OICR interrupt is configured to be throttled to no more than
once every 124 microseconds. This gives an effective interrupt rate of
~8000 interrupts per second. This should thus not cause a significant
increase in overall CPU usage when compared to sleeping.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix the buffer leak that occurs while switching
the port up and down with traffic and XDP by
checking for an active XDP program and freeing all empty TX buffers.
Fixes: efc2214b60 ("ice: Add support for XDP")
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/sch_taprio.c
d636fc5dd6 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
dced11ef84 ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")
net/ipv4/sysctl_net_ipv4.c
e209fee411 ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
ccce324dab ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_ptp_process_ts() function and its various helper functions return a
boolean value indicating whether any work is remaining. This use of a
boolean has grown confusing as we have multiple helpers that pass status
between each other. Readers must be aware of what "true" and "false" mean,
and it is very easy to get their meaning inverted. The names of the
functions are not standard "yes/no" questions, which is the best practice
for boolean returns.
Replace this use of an enumeration with a custom type, enum
ice_tx_tstamp_work. This enumeration clearly indicates whether all work is
done, or if more work is pending.
To aid in readability, factor the actual list iteration and processing out
into ice_ptp_process_tx_tstamp(), making it void. Then call this in
ice_ptp_tx_tstamp() ensuring that we always check the Tracker list at the
end when determining the appropriate return value.
Now the return value is an explicit name instead of the true or false
value. This is easier to follow and makes reading the resulting callers
much simpler.
In addition, this paves the way for future work to allow E822 hardware to
process timestamps for all functions using a single interrupt on the clock
owning PF.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor the ice_misc_intr() function to always return IRQ_WAKE_THREAD, and
schedule the service task during the soft IRQ thread function instead of at
the end of the hard IRQ handler.
Remove the duplicate call to ice_service_task_schedule() that happened when
we got a PCI exception.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_ptp_extts_work() and ice_ptp_periodic_work() functions are both
scheduled on the same kthread worker, pf.ptp.kworker. The
ice_ptp_periodic_work() function sends to the firmware to interact with the
PHY, and must block to wait for responses.
This can cause delay in responding to the PFINT_OICR_TSYN_EVNT interrupt
cause, ultimately resulting in disruption to processing an input signal of
the frequency is high enough. In our testing, even 100 Hz signals get
disrupted.
Fix this by instead processing the signal inside the miscellaneous
interrupt thread prior to handling Tx timestamps.
Use atomic bits in a new pf->misc_thread bitmap in order to safely
communicate which tasks require processing within the
ice_misc_intr_thread_fn(). This ensures the communication of desired tasks
from the ice_misc_intr() are correctly processed without racing even in the
event that the interrupt triggers again before the thread function exits.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If pf is NULL in ice_gnss_read() then it will be dereferenced
in the error path by a call to dev_dbg(ice_pf_to_dev(pf), ...).
Avoid this by simply returning in this case.
If logging is desired an alternate approach might be to
use pr_err() before returning.
Flagged by Smatch as:
.../ice_gnss.c:196 ice_gnss_read() error: we previously assumed 'pf' could be null (see line 131)
Fixes: 43113ff734 ("ice: add TTY for GNSS module for E810T device")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Flip the netif_carrier_ok() condition in queue wake logic.
When I moved it to inside __netif_txq_completed_wake()
I missed negating it.
This made the condition ineffective and could probably
lead to crashes.
Fixes: 301f227fc8 ("net: piggy back on the memory barrier in bql when waking queues")
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230607010826.960226-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current ice driver's GNSS write implementation buffers writes and
works through them asynchronously in a kthread. That's bad because:
- The GNSS write_raw operation is supposed to be synchronous[1][2].
- There is no upper bound on the number of pending writes.
Userspace can submit writes much faster than the driver can process,
consuming unlimited amounts of kernel memory.
A patch that's currently on review[3] ("[v3,net] ice: Write all GNSS
buffers instead of first one") would add one more problem:
- The possibility of waiting for a very long time to flush the write
work when doing rmmod, softlockups.
To fix these issues, simplify the implementation: Drop the buffering,
the write_work, and make the writes synchronous.
I tested this with gpsd and ubxtool.
[1] https://events19.linuxfoundation.org/wp-content/uploads/2017/12/The-GNSS-Subsystem-Johan-Hovold-Hovold-Consulting-AB.pdf
"User interface" slide.
[2] A comment in drivers/gnss/core.c:gnss_write():
/* Ignoring O_NONBLOCK, write_raw() is synchronous. */
[3] https://patchwork.ozlabs.org/project/intel-wired-lan/patch/20230217120541.16745-1-karol.kolacinski@intel.com/
Fixes: d6b98c8d24 ("ice: add write functionality for GNSS TTY")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inspired from struct flow_cls_offload :: cmd, in order for taprio to be
able to report statistics (which is future work), it seems that we need
to drill one step further with the ndo_setup_tc(TC_SETUP_QDISC_TAPRIO)
multiplexing, and pass the command as part of the common portion of the
muxed structure.
Since we already have an "enable" variable in tc_taprio_qopt_offload,
refactor all drivers to check for "cmd" instead of "enable", and reject
every other command except "replace" and "destroy" - to be future proof.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> # for lan966x
Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use newly introduce devlink port registration function variant and
register devlink port passing ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While struct_size() is normally used in situations where the structure
type already has a pointer instance, there are places where no variable
is available. In the past, this has been worked around by using a typed
NULL first argument, but this is a bit ugly. Add a helper to do this,
and replace the handful of instances of the code pattern with it.
Instances were found with this Coccinelle script:
@struct_size_t@
identifier STRUCT, MEMBER;
expression COUNT;
@@
- struct_size((struct STRUCT *)\(0\|NULL\),
+ struct_size_t(struct STRUCT,
MEMBER, COUNT)
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: HighPoint Linux Team <linux@highpoint-tech.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: Don Brace <don.brace@microchip.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Guo Xuenan <guoxuenan@huawei.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: kernel test robot <lkp@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: linux-scsi@vger.kernel.org
Cc: megaraidlinux.pdl@broadcom.com
Cc: storagedev@microchip.com
Cc: linux-xfs@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230522211810.never.421-kees@kernel.org
Tony Nguyen says:
====================
ice: allow matching on meta data
Michal Swiatkowski says:
This patchset is intended to improve the usability of the switchdev
slow path. Without matching on a meta data values slow path works
based on VF's MAC addresses. It causes a problem when the VF wants
to use more than one MAC address (e.g. when it is in trusted mode).
Parse all meta data in the same place where protocol type fields are
parsed. Add description for the currently implemented meta data. It is
important to note that depending on DDP not all described meta data can
be available. Using not available meta data leads to error returned by
function which is looking for correct words in profiles read from DDP.
There is also one small improvement, remove of rx field in rule info
structure (patch 2). It is redundant.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-05-18 (igc, igb, e1000e)
This series contains updates to igc, igb, and e1000e drivers.
Kurt Kanzenbach adds calls to txq_trans_cond_update() for XDP transmit
on igc.
Tom Rix makes definition of igb_pm_ops conditional on CONFIG_PM for igb.
Baozhu Ni adds a missing kdoc description on e1000e.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
e1000e: Add @adapter description to kdoc
igb: Define igb_pm_ops conditionally on CONFIG_PM
igc: Avoid transmit queue timeout for XDP
====================
Link: https://lore.kernel.org/r/20230518170942.418109-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The use of a source MAC to direct packets from the VF to the corresponding
port representor is only ok if there is only one MAC on a VF. To support
this functionality when the number of MACs on a VF is greater, it is
necessary to match a source VSI instead of a source MAC.
Let's use the new switch API that allows matching on metadata.
If MAC isn't used in match criteria there is no need to handle adding
rule after virtchnl command. Instead add new rule while port representor
is being configured.
Remove rule_added field, checking for sp_rule can be used instead.
Remove also checking for switchdev running in deleting rule as it can be
called from unroll context when running flag isn't set. Checking for
sp_rule covers both context (with and without running flag).
Rules are added in eswitch configuration flow, so there is no need to
have replay function.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add meta data matching criteria in the same place as protocol matching
criteria. There is no need to add meta data as special words after
parsing all lookups. Trade meta data in the same why as other lookups.
The one difference between meta data lookups and protocol lookups is
that meta data doesn't impact how the packets looks like. Because of that
ignore it when filling testing packet.
Match on tunnel type meta data always if tunnel type is different than
TNL_LAST.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Anonymous initializers are now discouraged. Define ICE_PROTCOL_ENTRY
macro to rewrite anonymous initializers to named one. No functional
changes here.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Information about the direction is currently stored in sw_act.flag.
There is no need to duplicate it in another field.
Setting direction flag doesn't mean that there is a match criteria for
direction in rule. It is only a information for HW from where switch id
should be collected (VSI or port). In current implementation of advance
rule handling, without matching for direction meta data, we can always
set one the same flag and everything will work the same.
Ability to match on direction meta data will be added in follow up
patches.
Recipe 0, 3 and 9 loaded from package has direction match
criteria, but they are handled in other function.
Move ice_adv_rule_info fields to avoid holes.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add description for each meta data. Redefine tunnel mask to match only
tunneled MAC and tunneled VLAN. It shouldn't try to match other flags
(previously it was 0xff, it is redundant).
VLAN mask was 0xd000, change it to 0xf000. 4 last bits are flags
depending on the same field in packets (VLAN tag). Because of that,
It isn't harmful to match also on ITAG.
Group all MDID and MDID offsets into enums to keep things organized.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-05-17 (ice, MAINTAINERS)
This series contains updates to ice driver and MAINTAINERS file.
Paul refactors PHY to link mode reporting and updates some PHY types to
report more accurate link modes for ice.
Dave removes mutual exclusion policy between LAG and SR-IOV in ice
driver.
Jesse updates link for Intel Wired LAN in the MAINTAINERS file.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
MAINTAINERS: update Intel Ethernet links
ice: Remove LAG+SRIOV mutual exclusion
ice: update PHY type to ethtool link mode mapping
ice: refactor PHY type to ethtool link mode
ice: update ICE_PHY_TYPE_HIGH_MAX_INDEX
====================
Link: https://lore.kernel.org/r/20230517165530.3179965-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Conflicts:
drivers/net/ethernet/freescale/fec_main.c
6ead9c98ca ("net: fec: remove the xdp_return_frame when lack of tx BDs")
144470c88c ("net: fec: using the standard return codes when xdp xmit errors")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a description for the kernel doc of the @adapter
of e1000e_trigger_lsc()
Signed-off-by: Baozhu Ni <nibaozhu@yeah.net>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
For s390, gcc with W=1 reports
drivers/net/ethernet/intel/igb/igb_main.c:186:32: error:
'igb_pm_ops' defined but not used [-Werror=unused-const-variable=]
186 | static const struct dev_pm_ops igb_pm_ops = {
| ^~~~~~~~~~
The only use of igb_pm_ops is conditional on CONFIG_PM.
The definition of igb_pm_ops should also be conditional on CONFIG_PM
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
High XDP load triggers the netdev watchdog:
|NETDEV WATCHDOG: enp3s0 (igc): transmit queue 2 timed out
The reason is the Tx queue transmission start (txq->trans_start) is not updated
in XDP code path. Therefore, add it for all XDP transmission functions.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There was a change previously to stop SR-IOV and LAG from existing on the
same interface. This was to prevent the violation of LACP (Link
Aggregation Control Protocol). The method to achieve this was to add a
no-op Rx handler onto the netdev when SR-IOV VFs were present, thus
blocking bonding, bridging, etc from claiming the interface by adding
its own Rx handler. Also, when an interface was added into a aggregate,
then the SR-IOV capability was set to false.
There are some users that have in house solutions using both SR-IOV and
bridging/bonding that this method interferes with (e.g. creating duplicate
VFs on the bonded interfaces and failing between them when the interface
fails over).
It makes more sense to provide the most functionality
possible, the restriction on co-existence of these features will be
removed. No additional functionality is currently being provided beyond
what existed before the co-existence restriction was put into place. It is
up to the end user to not implement a solution that would interfere with
existing network protocols.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Some link modes can be more accurately reported due to newer link mode
values that have been added to the kernel; update those PHY type to report
modes that better reflect the link mode.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor ice_phy_type_to_ethtool to use phy_type_[low|high]_lkup table to
map PHY type to AQ link speed and ethtool link mode. This removes
complexity and simplifies future changes.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ICE_PHY_TYPE_HIGH_MAX_INDEX should be the maximum index value and not the
length/number of ICE_PHY_TYPE_HIGH. This is not an issue because this
define is only used when calling ice_get_link_speed_based_on_phy_type(),
which will return ICE_AQ_LINK_SPEED_UNKNOWN for any invalid index. The
caller of ice_get_link_speed_based_on_phy_type(), ice_update_phy_type()
checks that the return value is a valid link speed before using it and
ICE_AQ_LINK_SPEED_UNKNOWN is not. However, update the define to reflect
the correct value.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
ice: support dynamic interrupt allocation
Piotr Raczynski says:
This patchset reimplements MSIX interrupt allocation logic to allow dynamic
interrupt allocation after MSIX has been initially enabled. This allows
current and future features to allocate and free interrupts as needed and
will help to drastically decrease number of initially preallocated
interrupts (even down to the API hard limit of 1). Although this patchset
does not change behavior in terms of actual number of allocated interrupts
during probe, it will be subject to change.
First few patches prepares to introduce dynamic allocation by moving
interrupt allocation code to separate file and update allocation API used
in the driver to the currently preferred one.
Due to the current contract between ice and irdma driver which is directly
accessing msix entries allocated by ice driver, even after moving away from
older pci_enable_msix_range function, still keep msix_entries array for
irdma use.
Next patches refactors and removes redundant code from SRIOV related logic
as it also make it easier to move away from static allocation scheme.
Last patches actually enables dynamic allocation of MSIX interrupts. First,
introduce functions to allocate and free interrupts individually. This sets
ground for the rest of the changes even if that patch still allocates the
interrupts from the preallocated pool. Since this patch starts to keep
interrupt details in ice_q_vector structure we can get rid of functions
that calculates base vector number and register offset for the interrupt
as it is equal to the interrupt index. Only keep separate register offset
functions for the VF VSIs.
Next, replace homegrown interrupt tracker with much simpler xarray based
approach. As new API always allocate interrupts one by one, also track
interrupts in the same manner.
Lastly, extend the interrupt tracker to deal both with preallocated and
dynamically allocated vectors and use pci_msix_alloc_irq_at and
pci_msix_free_irq functions. Since not all architecture supports dynamic
allocation, check it before trying to allocate a new interrupt.
As previously mentioned, this patchset does not change number of initially
allocated interrupts during init phase but now it can and will likely be
changed.
Patch 1-3 -> move code around and use newer API
Patch 4-5 -> refactor and remove redundant SRIOV code
Patch 6 -> allocate every interrupt individually
Patch 7 -> replace homegrown interrupt tracker with xarray
Patch 8 -> allow dynamic interrupt allocation
---
v2:
Patch 4
- simplify ice_vsi_setup_vector_base and account for num_avail_sw_msix
Patch 8
- prevent q_vector leak in case vf ctrl VSI error
v1: https://lore.kernel.org/netdev/20230509170048.2235678-1-anthony.l.nguyen@intel.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In igb_hash_mc_addr() the expression:
"mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]"
shift by more than 7 bits always yields zero, so hash becomes not so different.
Add initialization with bit_shift = 1 and add a loop condition to ensure
bit_shift will be always in [1..8] range.
Fixes: 9d5c824399 ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZGKqEAAKCRDbK58LschI
g6LYAQDp1jAszCOkmJ8VUA0ZyC5NAFDv+7y9Nd1toYWYX1btzAEAkf8+5qBJ1qmI
P5M0hjMTbH4MID9Aql10ZbMHheyOBAo=
=NUQM
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-05-16
We've added 57 non-merge commits during the last 19 day(s) which contain
a total of 63 files changed, 3293 insertions(+), 690 deletions(-).
The main changes are:
1) Add precision propagation to verifier for subprogs and callbacks,
from Andrii Nakryiko.
2) Improve BPF's {g,s}setsockopt() handling with wrong option lengths,
from Stanislav Fomichev.
3) Utilize pahole v1.25 for the kernel's BTF generation to filter out
inconsistent function prototypes, from Alan Maguire.
4) Various dyn-pointer verifier improvements to relax restrictions,
from Daniel Rosenberg.
5) Add a new bpf_task_under_cgroup() kfunc for designated task,
from Feng Zhou.
6) Unblock tests for arm64 BPF CI after ftrace supporting direct call,
from Florent Revest.
7) Add XDP hint kfunc metadata for RX hash/timestamp for igc,
from Jesper Dangaard Brouer.
8) Add several new dyn-pointer kfuncs to ease their usability,
from Joanne Koong.
9) Add in-depth LRU internals description and dot function graph,
from Joe Stringer.
10) Fix KCSAN report on bpf_lru_list when accessing node->ref,
from Martin KaFai Lau.
11) Only dump unprivileged_bpf_disabled log warning upon write,
from Kui-Feng Lee.
12) Extend test_progs to directly passing allow/denylist file,
from Stephen Veiss.
13) Fix BPF trampoline memleak upon failure attaching to fentry,
from Yafang Shao.
14) Fix emitting struct bpf_tcp_sock type in vmlinux BTF,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (57 commits)
bpf: Fix memleak due to fentry attach failure
bpf: Remove bpf trampoline selector
bpf, arm64: Support struct arguments in the BPF trampoline
bpftool: JIT limited misreported as negative value on aarch64
bpf: fix calculation of subseq_idx during precision backtracking
bpf: Remove anonymous union in bpf_kfunc_call_arg_meta
bpf: Document EFAULT changes for sockopt
selftests/bpf: Correctly handle optlen > 4096
selftests/bpf: Update EFAULT {g,s}etsockopt selftests
bpf: Don't EFAULT for {g,s}setsockopt with wrong optlen
libbpf: fix offsetof() and container_of() to work with CO-RE
bpf: Address KCSAN report on bpf_lru_list
bpf: Add --skip_encoding_btf_inconsistent_proto, --btf_gen_optimized to pahole flags for v1.25
selftests/bpf: Accept mem from dynptr in helper funcs
bpf: verifier: Accept dynptr mem as mem in helpers
selftests/bpf: Check overflow in optional buffer
selftests/bpf: Test allowing NULL buffer in dynptr slice
bpf: Allow NULL buffers in bpf_dynptr_slice(_rw)
selftests/bpf: Add testcase for bpf_task_under_cgroup
bpf: Add bpf_task_under_cgroup() kfunc
...
====================
Link: https://lore.kernel.org/r/20230515225603.27027-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the user disables rxvlan offloading and then changes the number of
channels, all VLAN ports are unable to receive traffic.
Changing the number of channels triggers a VFR reset. During re-init, when
VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is received, we do:
1 - set the IAVF_FLAG_SETUP_NETDEV_FEATURES flag
2 - call
iavf_set_vlan_offload_features(adapter, 0, netdev->features);
The second step sends to the PF the __default__ features, in this case
aq_required |= IAVF_FLAG_AQ_ENABLE_CTAG_VLAN_STRIPPING
While the first step forces the watchdog task to call
netdev_update_features() -> iavf_set_features() ->
iavf_set_vlan_offload_features(adapter, netdev->features, features).
Since the user disabled the "rxvlan", this sets:
aq_required |= IAVF_FLAG_AQ_DISABLE_CTAG_VLAN_STRIPPING
When we start processing the AQ commands, both flags are enabled. Since we
process DISABLE_XTAG first then ENABLE_XTAG, this results in the PF
enabling the rxvlan offload. This breaks all communications on the VLAN
net devices.
Fix by removing the call to iavf_set_vlan_offload_features() (second
step). Calling netdev_update_features() from watchdog task is enough for
both init and reset paths.
Fixes: 7598f4b40b ("iavf: Move netdev_update_features() into watchdog task")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix the current implementation that causes ice_trigger_vf_reset()
to start resetting the VF even when the VF-NIC is still initializing.
When we reset NIC with ice driver it can interfere with
iavf-vf initialization e.g. during consecutive resets induced by ice
iavf ice
| |
|<-----------------|
| ice resets vf
iavf |
reset |
start |
|<-----------------|
| ice resets vf
| causing iavf
| initialization
| error
| |
iavf
reset
end
This leads to a series of -53 errors
(failed to init adminq) from the IAVF.
Change the state of the vf_state field to be not active when the IAVF
is still initializing. Make sure to wait until receiving the message on
the message box to ensure that the vf is ready and initializded.
In simple terms we use the ACTIVE flag to make sure that the ice
driver knows if the iavf is ready for another reset
iavf ice
| |
| |
|<------------- ice resets vf
iavf vf_state != ACTIVE
reset |
start |
| |
| |
iavf |
reset-------> vf_state == ACTIVE
end ice resets vf
| |
| |
Fixes: c54d209c78 ("ice: Wait for VF to be reset/ready before configuration")
Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Acked-by: Jacob Keller <Jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
After a core PF reset, the VFs were showing wrong Rx/Tx stats. This is a
regression in commit 6624e780a5 ("ice: split ice_vsi_setup into smaller
functions") caused by missing to set "stat_offsets_loaded = false" in the
ice_vsi_rebuild() path.
Fixes: 6624e780a5 ("ice: split ice_vsi_setup into smaller functions")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently driver can only allocate interrupt vectors during init phase by
calling pci_alloc_irq_vectors. Change that and make use of new
pci_msix_alloc_irq_at/pci_msix_free_irq API and enable to allocate and free
more interrupts after MSIX has been enabled. Since not all platforms
supports dynamic allocation, check it with pci_msix_can_alloc_dyn.
Extend the tracker to keep track how many interrupts are allocated
initially so when all such vectors are already used, additional interrupts
are automatically allocated dynamically. Remember each interrupt allocation
method to then free appropriately. Since some features may require
interrupts allocated dynamically add appropriate VSI flag and take it into
account when allocating new interrupt.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Replace custom interrupt tracker with generic xarray data structure.
Remove all code responsible for searching for a new entry with xa_alloc,
which always tries to allocate at the lowes possible index. As a result
driver is always using a contiguous region of the MSIX vector table.
New tracker keeps ice_irq_entry entries in xarray as opaque for the rest
of the driver hiding the entry details from the caller.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently interrupt allocations, depending on a feature are distributed
in batches. Also, after allocation there is a series of operations that
distributes per irq settings through that batch of interrupts.
Although driver does not yet support dynamic interrupt allocation, keep
allocated interrupts in a pool and add allocation abstraction logic to
make code more flexible. Keep per interrupt information in the
ice_q_vector structure, which yields ice_vsi::base_vector redundant.
Also, as a result there are a few functions that can be removed.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove redundant code from ice_get_max_valid_res_idx that has no effect.
ice_pf::irq_tracker is initialized during driver probe, there is no reason
to check it again. Also it is not possible for pf::sriov_base_vector to be
lower than the tracker length, remove WARN_ON that will never happen.
Get rid of ice_get_max_valid_res_idx helper function completely since it
can never return negative value.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
All VF control VSIs share the same interrupt vector. Currently, a helper
function dedicated for that directly sets ice_vsi::base_vector.
Use helper that returns pointer to first found VF control VSI instead.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move away from using pci_enable_msix_range/pci_disable_msix and use
pci_alloc_irq_vectors/pci_free_irq_vectors instead.
As a result stop tracking msix_entries since with newer API entries are
handled by MSIX core. However, due to current design of communication
with RDMA driver which accesses ice_pf::msix_entries directly, keep
using the array just for RDMA driver use.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, driver gets interrupt number directly from ice_pf::msix_entries
array. Use helper function dedicated to do just that.
While at it use a variable to store interrupt number in
ice_free_irq_msix_misc instead of calling the helper function twice.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Keep interrupt handling code in a dedicated file. This helps keep driver
structured better and prepares for more functionality added to this file.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As not all ICE_TX_FLAGS_* fit in current 16-bit limited
tx_flags field that was introduced in the Fixes commit,
VLAN-related information would be discarded completely.
As such, creating a vlan and trying to run ping through
would result in no traffic passing.
Fix that by refactoring tx_flags variable into flags only and
a separate variable that holds VLAN ID. As there is some space left,
type variable can fit between those two. Pahole reports no size
change to ice_tx_buf struct.
Fixes: aa1d3faf71 ("ice: Robustify cleaning/completing XDP Tx buffers")
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
VF to VF traffic shouldn't go outside. To enforce it, set only the loopback
enable bit in case of all ingress type rules added via the tc tool.
Fixes: 0d08a441fb ("ice: ndo_setup_tc implementation for PF")
Reported-by: Sujai Buvaneswaran <Sujai.Buvaneswaran@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
igc_configure_rx_ring() function will be called as part of XDP program
setup. If Rx hardware timestamp is enabled prio to XDP program setup,
this timestamp enablement will be overwritten when buffer size is
written into SRRCTL register.
Thus, this commit read the register value before write to SRRCTL
register. This commit is tested by using xdp_hw_metadata bpf selftest
tool. The tool enables Rx hardware timestamp and then attach XDP program
to igc driver. It will display hardware timestamp of UDP packet with
port number 9092. Below are detail of test steps and results.
Command on DUT:
sudo ./xdp_hw_metadata <interface name>
Command on Link Partner:
echo -n skb | nc -u -q1 <destination IPv4 addr> 9092
Result before this patch:
skb hwtstamp is not found!
Result after this patch:
found skb hwtstamp = 1677800973.642836757
Optionally, read PHC to confirm the values obtained are almost the same:
Command:
sudo ./testptp -d /dev/ptp0 -g
Result:
clock time: 1677800973.913598978 or Fri Mar 3 07:49:33 2023
Fixes: fc9df2a0b5 ("igc: Enable RX via AF_XDP zero-copy")
Cc: <stable@vger.kernel.org> # 5.14+
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NIC hardware RX timestamping mechanism adds an optional tailored
header before the MAC header containing packet reception time. Optional
depending on RX descriptor TSIP status bit (IGC_RXDADV_STAT_TSIP). In
case this bit is set driver does offset adjustments to packet data start
and extracts the timestamp.
The timestamp need to be extracted before invoking the XDP bpf_prog,
because this area just before the packet is also accessible by XDP via
data_meta context pointer (and helper bpf_xdp_adjust_meta). Thus, an XDP
bpf_prog can potentially overwrite this and corrupt data that we want to
extract with the new kfunc for reading the timestamp.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Yoong Siang <yoong.siang.song@intel.com>
Link: https://lore.kernel.org/bpf/168182465791.616355.2583922957423587914.stgit@firesoul
This implements XDP hints kfunc for RX-hash (xmo_rx_hash).
The HW rss hash type is handled via mapping table.
This igc driver (default config) does L3 hashing for UDP packets
(excludes UDP src/dest ports in hash calc). Meaning RSS hash type is
L3 based. Tested that the igc_rss_type_num for UDP is either
IGC_RSS_TYPE_HASH_IPV4 or IGC_RSS_TYPE_HASH_IPV6.
This patch also updates AF_XDP zero-copy function igc_clean_rx_irq_zc()
to use the xdp_buff wrapper struct igc_xdp_buff.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Yoong Siang <yoong.siang.song@intel.com>
Link: https://lore.kernel.org/bpf/168182465285.616355.2701740913376314790.stgit@firesoul
Driver specific metadata data for XDP-hints kfuncs are propagated via tail
extending the struct xdp_buff with a locally scoped driver struct.
Zero-Copy AF_XDP/XSK does similar tricks via struct xdp_buff_xsk. This
xdp_buff_xsk struct contains a CB area (24 bytes) that can be used for
extending the locally scoped driver into. The XSK_CHECK_PRIV_TYPE define
catch size violations build time.
The changes needed for AF_XDP zero-copy in igc_clean_rx_irq_zc()
is done in next patch, because the member rx_desc isn't available
at this point.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Yoong Siang <yoong.siang.song@intel.com>
Link: https://lore.kernel.org/bpf/168182464779.616355.3761989884165609387.stgit@firesoul
When function igc_rx_hash() was introduced in v4.20 via commit 0507ef8a03
("igc: Add transmit and receive fastpath and interrupt handlers"), the
hardware wasn't configured to provide RSS hash, thus it made sense to not
enable net_device NETIF_F_RXHASH feature bit.
The NIC hardware was configured to enable RSS hash info in v5.2 via commit
2121c2712f ("igc: Add multiple receive queues control supporting"), but
forgot to set the NETIF_F_RXHASH feature bit.
The original implementation of igc_rx_hash() didn't extract the associated
pkt_hash_type, but statically set PKT_HASH_TYPE_L3. The largest portions of
this patch are about extracting the RSS Type from the hardware and mapping
this to enum pkt_hash_types. This was based on Foxville i225 software user
manual rev-1.3.1 and tested on Intel Ethernet Controller I225-LM (rev 03).
For UDP it's worth noting that RSS (type) hashing have been disabled both for
IPv4 and IPv6 (see IGC_MRQC_RSS_FIELD_IPV4_UDP + IGC_MRQC_RSS_FIELD_IPV6_UDP)
because hardware RSS doesn't handle fragmented pkts well when enabled (can
cause out-of-order). This results in PKT_HASH_TYPE_L3 for UDP packets, and
hash value doesn't include UDP port numbers. Not being PKT_HASH_TYPE_L4, have
the effect that netstack will do a software based hash calc calling into
flow_dissect, but only when code calls skb_get_hash(), which doesn't
necessary happen for local delivery.
For QA verification testing I wrote a small bpftrace prog:
[0] https://github.com/xdp-project/xdp-project/blob/master/areas/hints/monitor_skb_hash_on_dev.bt
Fixes: 2121c2712f ("igc: Add multiple receive queues control supporting")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Yoong Siang <yoong.siang.song@intel.com>
Link: https://lore.kernel.org/bpf/168182464270.616355.11391652654430626584.stgit@firesoul
Commit 4fe815850b ("ixgbe: let the xdpdrv work with more than 64 cpus")
adds support to allow XDP programs to run on systems with more than
64 CPUs by locking the XDP TX rings and indexing them using cpu % 64
(IXGBE_MAX_XDP_QS).
Upon trying this out patch on a system with more than 64 cores,
the kernel paniced with an array-index-out-of-bounds at the return in
ixgbe_determine_xdp_ring in ixgbe.h, which means ixgbe_determine_xdp_q_idx
was just returning the cpu instead of cpu % IXGBE_MAX_XDP_QS. An example
splat:
==========================================================================
UBSAN: array-index-out-of-bounds in
/var/lib/dkms/ixgbe/5.18.6+focal-1/build/src/ixgbe.h:1147:26
index 65 is out of range for type 'ixgbe_ring *[64]'
==========================================================================
BUG: kernel NULL pointer dereference, address: 0000000000000058
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 65 PID: 408 Comm: ksoftirqd/65
Tainted: G IOE 5.15.0-48-generic #54~20.04.1-Ubuntu
Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.5.4 01/13/2020
RIP: 0010:ixgbe_xmit_xdp_ring+0x1b/0x1c0 [ixgbe]
Code: 3b 52 d4 cf e9 42 f2 ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 55 b9
00 00 00 00 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 <44> 0f b7
47 58 0f b7 47 5a 0f b7 57 54 44 0f b7 76 08 66 41 39 c0
RSP: 0018:ffffbc3fcd88fcb0 EFLAGS: 00010282
RAX: ffff92a253260980 RBX: ffffbc3fe68b00a0 RCX: 0000000000000000
RDX: ffff928b5f659000 RSI: ffff928b5f659000 RDI: 0000000000000000
RBP: ffffbc3fcd88fce0 R08: ffff92b9dfc20580 R09: 0000000000000001
R10: 3d3d3d3d3d3d3d3d R11: 3d3d3d3d3d3d3d3d R12: 0000000000000000
R13: ffff928b2f0fa8c0 R14: ffff928b9be20050 R15: 000000000000003c
FS: 0000000000000000(0000) GS:ffff92b9dfc00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000058 CR3: 000000011dd6a002 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
ixgbe_poll+0x103e/0x1280 [ixgbe]
? sched_clock_cpu+0x12/0xe0
__napi_poll+0x30/0x160
net_rx_action+0x11c/0x270
__do_softirq+0xda/0x2ee
run_ksoftirqd+0x2f/0x50
smpboot_thread_fn+0xb7/0x150
? sort_range+0x30/0x30
kthread+0x127/0x150
? set_kthread_struct+0x50/0x50
ret_from_fork+0x1f/0x30
</TASK>
I think this is how it happens:
Upon loading the first XDP program on a system with more than 64 CPUs,
ixgbe_xdp_locking_key is incremented in ixgbe_xdp_setup. However,
immediately after this, the rings are reconfigured by ixgbe_setup_tc.
ixgbe_setup_tc calls ixgbe_clear_interrupt_scheme which calls
ixgbe_free_q_vectors which calls ixgbe_free_q_vector in a loop.
ixgbe_free_q_vector decrements ixgbe_xdp_locking_key once per call if
it is non-zero. Commenting out the decrement in ixgbe_free_q_vector
stopped my system from panicing.
I suspect to make the original patch work, I would need to load an XDP
program and then replace it in order to get ixgbe_xdp_locking_key back
above 0 since ixgbe_setup_tc is only called when transitioning between
XDP and non-XDP ring configurations, while ixgbe_xdp_locking_key is
incremented every time ixgbe_xdp_setup is called.
Also, ixgbe_setup_tc can be called via ethtool --set-channels, so this
becomes another path to decrement ixgbe_xdp_locking_key to 0 on systems
with more than 64 CPUs.
Since ixgbe_xdp_locking_key only protects the XDP_TX path and is tied
to the number of CPUs present, there is no reason to disable it upon
unloading an XDP program. To avoid confusion, I have moved enabling
ixgbe_xdp_locking_key into ixgbe_sw_init, which is part of the probe path.
Fixes: 4fe815850b ("ixgbe: let the xdpdrv work with more than 64 cpus")
Signed-off-by: John Hickey <jjh@daedalian.us>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230425170308.2522429-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to skb_eth_hdr() introduced in commit 96cc4b6958 ("macvlan: do
not assume mac_header is set in macvlan_broadcast()"), let's introduce a
skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get
to the VLAN header based on skb->data rather than based on the
skb_mac_header(skb).
We also consolidate the drivers that dereference skb->data to go through
this helper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
This series lowers the CPU usage of the ice driver when using its
provided /dev/gnss*.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
10 ms is a lot of time to spend busy-waiting. Sleeping is clearly
allowed here, because we have just returned from ice_sq_send_cmd(),
which takes a mutex.
On kernels with HZ=100, this msleep may be twice as long, but I don't
think it matters.
I did not actually observe any retries happening here.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The 'buf_cpy'-related code in ice_sq_send_cmd_retry() looks broken.
'buf' is nowhere copied into 'buf_cpy'.
The reason this does not cause problems is that all commands for which
'is_cmd_for_retry' is true go with a NULL buf.
Let's remove 'buf_cpy'. Add a WARN_ON in case the assumption no longer
holds in the future.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The driver polls for ice_sq_done() with a 100 µs period for up to 1 s
and it uses udelay to do that.
Let's use usleep_range instead. We know sleeping is allowed here,
because we're holding a mutex (cq->sq_lock). To preserve the total
max waiting time, measure the timeout in jiffies.
ICE_CTL_Q_SQ_CMD_TIMEOUT is used also in ice_release_res(), but there
the polling period is 1 ms (i.e. 10 times longer). Since the timeout was
expressed in terms of the number of loops, the total timeout in this
function is 10 s. I do not know if this is intentional. This patch keeps
it.
The patch lowers the CPU usage of the ice-gnss-<dev_name> kernel thread
on my system from ~8 % to less than 1 %.
I received a report of high CPU usage with ptp4l where the busy-waiting
in ice_sq_send_cmd dominated the profile. This patch has been tested in
that usecase too and it made a huge improvement there.
Tested-by: Brent Rowsell <browsell@redhat.com>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
sq_cmd_timeout is initialized to ICE_CTL_Q_SQ_CMD_TIMEOUT and never
changed, so just use the constant directly.
Suggested-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Double the GNSS data polling interval from 10 ms to 20 ms.
According to Karol Kolacinski from the Intel team, they have been
planning to make this change.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice-gnss-<dev_name> kernel thread, which reads data from the u-blox
GNSS module, keep a CPU core almost 100% busy. The main reason is that
it busy-waits for data to become available.
A simple improvement would be to replace the "mdelay(10);" in
ice_gnss_read() with sleeping. A better fix is to not do any waiting
directly in the function and just requeue this delayed work as needed.
The advantage is that canceling the work from ice_gnss_exit() becomes
immediate, rather than taking up to ~2.5 seconds (ICE_MAX_UBX_READ_TRIES
* 10 ms).
This lowers the CPU usage of the ice-gnss-<dev_name> thread on my system
from ~90 % to ~8 %.
I am not sure if the larger 0.1 s pause after inserting data into the
gnss subsystem is really necessary, but I'm keeping that as it was.
Of course, ideally the driver would not have to poll at all, but I don't
know if the E810 can watch for GNSS data availability over the i2c bus
by itself and notify the driver.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ethtool uses `ETHTOOL_GRXRINGS` to compute how many queues are supported
by RSS. The driver should return the smaller of either:
- The maximum number of RSS queues the device supports, OR
- The number of RX queues configured
Prior to this change, running `ethtool -X $iface default` fails if the
number of queues configured is larger than the number supported by RSS,
even though changing the queue count correctly resets the flowhash to
use all supported queues.
Other drivers (for example, i40e) will succeed but the flow hash will
reset to support the maximum number of queues supported by RSS, even if
that amount is smaller than the configured amount.
Prior to this change:
$ sudo ethtool -L eth1 combined 20
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 20 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 10 11 12 13 14 15
16: 0 1 2 3 4 5 6 7
24: 8 9 10 11 12 13 14 15
32: 0 1 2 3 4 5 6 7
...
You can see that the flowhash was correctly set to use the maximum
number of queues supported by the driver (16).
However, asking the NIC to reset to "default" fails:
$ sudo ethtool -X eth1 default
Cannot set RX flow hash configuration: Invalid argument
After this change, the flowhash can be reset to default which will use
all of the available RSS queues (16) or the configured queue count,
whichever is smaller.
Starting with eth1 which has 10 queues and a flowhash distributing to
all 10 queues:
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 10 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 0 1 2 3 4 5
16: 6 7 8 9 0 1 2 3
...
Increasing the queue count to 48 resets the flowhash to distribute to 16
queues, as it did before this patch:
$ sudo ethtool -L eth1 combined 48
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 10 11 12 13 14 15
16: 0 1 2 3 4 5 6 7
...
Due to the other bugfix in this series, the flowhash can be set to use
queues 0-5:
$ sudo ethtool -X eth1 equal 5
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
0: 0 1 2 3 4 0 1 2
8: 3 4 0 1 2 3 4 0
16: 1 2 3 4 0 1 2 3
...
Due to this bugfix, the flowhash can be reset to default and use 16
queues:
$ sudo ethtool -X eth1 default
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 10 11 12 13 14 15
16: 0 1 2 3 4 5 6 7
...
Fixes: 91cd94bfe4 ("ixgbe: add basic support for setting and getting nfc controls")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ixgbe currently returns `EINVAL` whenever the flowhash it set by ethtool
because the ethtool code in the kernel passes a non-zero value for hfunc
that ixgbe should allow.
When ethtool is called with `ETHTOOL_SRXFHINDIR`,
`ethtool_set_rxfh_indir` will call ixgbe's set_rxfh function
with `ETH_RSS_HASH_NO_CHANGE`. This value should be accepted.
When ethtool is called with `ETHTOOL_SRSSH`, `ethtool_set_rxfh` will
call ixgbe's set_rxfh function with `rxfh.hfunc`, which appears to be
hardcoded in ixgbe to always be `ETH_RSS_HASH_TOP`. This value should
also be accepted.
Before this patch:
$ sudo ethtool -L eth1 combined 10
$ sudo ethtool -X eth1 default
Cannot set RX flow hash configuration: Invalid argument
After this patch:
$ sudo ethtool -L eth1 combined 10
$ sudo ethtool -X eth1 default
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 10 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 0 1 2 3 4 5
16: 6 7 8 9 0 1 2 3
24: 4 5 6 7 8 9 0 1
...
Fixes: 1c7cf0784e ("ixgbe: support for ethtool set_rxfh")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-04-17 (i40e)
This series contains updates to i40e only.
Alex moves setting of active filters to occur under lock and checks/takes
error path in rebuild if re-initializing the misc interrupt vector
failed.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix i40e_setup_misc_vector() error handling
i40e: fix accessing vsi->active_filters without holding lock
====================
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230417205245.1030733-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While using i219-LM card currently it was only possible to achieve
about 60% of maximum speed due to regression introduced in Linux 5.8.
This was caused by TSO not being disabled by default despite commit
f29801030a ("e1000e: Disable TSO for buffer overrun workaround").
Fix that by disabling TSO during driver probe.
Fixes: f29801030a ("e1000e: Disable TSO for buffer overrun workaround")
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230417205345.1030801-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add error handling of i40e_setup_misc_vector() in i40e_rebuild().
In case interrupt vectors setup fails do not re-open vsi-s and
do not bring up vf-s, we have no interrupts to serve a traffic
anyway.
Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix accessing vsi->active_filters without holding the mac_filter_hash_lock.
Move vsi->active_filters = 0 inside critical section and
move clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state) after the critical
section to ensure the new filters from other threads can be added only after
filters cleaning in the critical section is finished.
Fixes: 278e7d0b9d ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Drivers call netdev_tx_completed_queue() right before
netif_txq_maybe_wake(). If BQL is enabled netdev_tx_completed_queue()
should issue a memory barrier, so we can depend on that separating
the stop check from the consumer index update, instead of adding
another barrier in netif_txq_maybe_wake().
This matters more than the barriers on the xmit path, because
the wake condition is almost always true. So we issue the
consumer side barrier often.
Wrap netdev_tx_completed_queue() in a local helper to issue
the barrier even if BQL is disabled. Keep the same semantics
as netdev_tx_completed_queue() (barrier only if bytes != 0)
to make it clear that the barrier is conditional.
Plus since macro gets pkt/byte counts as arguments now -
we can skip waking if there were no packets completed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert ixgbe to use the new macros, I think a lot of people
copy the ixgbe code. The only functional change is that the
unlikely() in ixgbe_clean_tx_irq() turns into a likely()
inside the new macro and no longer includes
total_packets && netif_carrier_ok(tx_ring->netdev)
which is probably for the best, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VLAN filters info is currently being held in a list and 2 bitmaps
(active_cvlans and active_svlans). We are experiencing some racing where
data is not in sync in the list and bitmaps. For example, the VLAN is
initially added to the list but only when the PF replies, it is added to
the bitmap. If a user adds many V2 VLANS before the PF responds:
while [ $((i++)) ]
ip l add l eth0 name eth0.$i type vlan id $i
we might end up with more VLAN list entries than the designated limit.
Also, The "ip link show" will show more links added than the PF limit.
On the other and, the bitmaps are only used to check the number of VLAN
filters and to re-enable the filters when the interface goes from DOWN to
UP.
This patch gets rid of the bitmaps and uses the list only. To do that,
the states of the VLAN filter are modified:
1 - IAVF_VLAN_REMOVE: the entry needs to be totally removed after informing
the PF. This is the "ip link del eth0.$i" path.
2 - IAVF_VLAN_DISABLE: (new) the netdev went down. The filter needs to be
removed from the PF and then marked INACTIVE.
3 - IAVF_VLAN_INACTIVE: (new) no PF filter exists, but the user did not
delete the VLAN.
Fixes: 48ccc43ecf ("iavf: Add support VIRTCHNL_VF_OFFLOAD_VLAN_V2 during netdev config")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The VLAN filter states are currently being saved as individual bits.
This is error prone as multiple bits might be mistakenly set.
Fix by replacing the bits with a single state enum. Also, add an
"ACTIVE" state for filters that are accepted by the PF.
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reset the FDIR counters when FDIR inits. Without this patch,
when VF initializes or resets, all the FDIR counters are not
cleaned, which may cause unexpected behaviors for future FDIR
rule create (e.g., rule conflict).
Fixes: 1f7ea1cd6a ("ice: Enable FDIR Configure for AVF")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Lingyu Liu <lingyu.liu@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When adding a FDIR filter, if ice_vc_fdir_set_irq_ctx returns failure,
the inserted fdir entry will not be removed and if ice_vc_fdir_write_fltr
returns failure, the fdir context info for irq handler will not be cleared
which may lead to inconsistent or memory leak issue. This patch refines
failure cases to resolve this issue.
Fixes: 1f7ea1cd6a ("ice: Enable FDIR Configure for AVF")
Signed-off-by: Simei Su <simei.su@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently in the i40e driver there is no implementation of different
MAC address handling depending on whether it is a legacy or primary.
Introduce new checks for VF to be able to specify its primary MAC
address based on the VIRTCHNL_ETHER_ADDR_PRIMARY type.
Primary MAC address are treated differently compared to legacy
ones in a scenario where:
1. If a unicast MAC is being added and it's specified as
VIRTCHNL_ETHER_ADDR_PRIMARY, then replace the current
default_lan_addr.addr.
2. If a unicast MAC is being deleted and it's type
is specified as VIRTCHNL_ETHER_ADDR_PRIMARY, then zero the
hw_lan_addr.addr.
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-30 (documentation, ice)
This series contains updates to driver documentation and the ice driver.
Tony removes links and addresses related to the out-of-tree driver from the
Intel ethernet driver documentation.
Jake removes a comment that is no longer valid to the ice driver.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: remove comment about not supporting driver reinit
Documentation/eth/intel: Remove references to SourceForge
Documentation/eth/intel: Update address for driver support
====================
Link: https://lore.kernel.org/r/20230330165935.2503604-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Conflicts:
drivers/net/ethernet/mediatek/mtk_ppe.c
3fbe4d8c0e ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
924531326e ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 31c8db2c4f ("ice: implement devlink reinit action"), the ice
driver does support driver re-initialization via devlink reload. Remove the
stale comment indicating that the driver lacks this support from the
ice_devlink_ops structure.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix invalid registers dump from ethtool -d ethX after adapter self test
by ethtool -t ethY. It causes invalid data display.
The problem was caused by overwriting i40e_reg_list[].elements
which is common for ethtool self test and dump.
Fixes: 22dd9ae8af ("i40e: Rework register diagnostic")
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230328172659.3906413-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code implicitly assumes that the list iterator finds a correct
handle. If 'vsi_handle' is not found the 'old_agg_vsi_info' was
pointing to an bogus memory location. For safety a separate list
iterator variable should be used to make the != NULL check on
'old_agg_vsi_info' correct under any circumstances.
Additionally Linus proposed to avoid any use of the list iterator
variable after the loop, in the attempt to move the list iterator
variable declaration into the macro to avoid any potential misuse after
the loop. Using it in a pointer comparison after the loop is undefined
behavior and should be omitted if possible [1].
Fixes: 37c592062b ("ice: remove the VSI info from previous agg")
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jkl820.git@gmail.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add profile conflict check while adding some FDIR rules to avoid
unexpected flow behavior, rules may have conflict including:
IPv4 <---> {IPv4_UDP, IPv4_TCP, IPv4_SCTP}
IPv6 <---> {IPv6_UDP, IPv6_TCP, IPv6_SCTP}
For example, when we create an FDIR rule for IPv4, this rule will work
on packets including IPv4, IPv4_UDP, IPv4_TCP and IPv4_SCTP. But if we
then create an FDIR rule for IPv4_UDP and then destroy it, the first
FDIR rule for IPv4 cannot work on pkt IPv4_UDP then.
To prevent this unexpected behavior, we add restriction in software
when creating FDIR rules by adding necessary profile conflict check.
Fixes: 1f7ea1cd6a ("ice: Enable FDIR Configure for AVF")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The current implementation causes ice_vsi_update() to update all VSI
fields based on the cached VSI context. This also assumes that the
ICE_AQ_VSI_PROP_Q_OPT_VALID bit is set. This can cause problems if the
VSI context is not correctly synced by the driver. Fix this by only
updating the fields that correspond to ICE_AQ_VSI_PROP_Q_OPT_VALID.
Also, make sure to save the updated result in the cached VSI context
on success.
Fixes: 348048e724 ("ice: Implement iidc operations")
Co-developed-by: Robert Malz <robertx.malz@intel.com>
Signed-off-by: Robert Malz <robertx.malz@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
make modules W=1 returns:
.../ice/ice_txrx_lib.c:448: warning: Function parameter or member 'first_idx' not described in 'ice_finalize_xdp_rx'
.../ice/ice_txrx.c:948: warning: Function parameter or member 'ntc' not described in 'ice_get_rx_buf'
.../ice/ice_txrx.c:1038: warning: Excess function parameter 'rx_buf' description in 'ice_construct_skb'
Fix these warnings by adding and deleting the deviant arguments.
Fixes: 2fba7dc515 ("ice: Add support for XDP multi-buffer on Rx side")
Fixes: d7956d81f1 ("ice: Pull out next_to_clean bump out of ice_put_rx_buf()")
CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-21 (ice)
This series contains updates to ice driver only.
Piotr sets first_desc field for proper handling of Flow Director
packets.
Michal moves error checking for VF earlier in function to properly return
error before other checks/reporting; he also corrects VSI filter removal to
be done during VSI removal and not rebuild.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: remove filters only if VSI is deleted
ice: check if VF exists before mode check
ice: fix rx buffers handling for flow director packets
====================
Link: https://lore.kernel.org/r/20230321183641.2849726-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
