Make sure the clockgating feature is supported before action.
Otherwise, the feature may be disabled unexpectedly on enablement
request.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable ASPM support for PCIE 7.4.0 and 7.6.0.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The scratch register should be accessed through MMIO instead of RLCG
in SRIOV, since it being used in RLCG register access function.
Fixes: d54762cc3e ("drm/amdgpu: nuke dynamic gfx scratch reg allocation")
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removed an unused parameter from two functions and added kernel-doc
comments.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is the same as the default case, so drop the extra
logic.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for peer-to-peer communication among AMD GPUs over PCIe
bus. Support REQUIRES enablement of config HSA_AMD_P2P.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All other chips, from gfx6-gfx10, now include the MODE register at the
end of the wave debug state. This appears to have been missed in gfx11,
so this patch adds in MODE to the debug state for gfx11.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix alignment problems reported by zuul for the
commit b07d1d73b0 ("drm/amd/amdgpu: Enable high priority gfx queue")
Fixes: b07d1d73b0 ("drm/amd/amdgpu: Enable high priority gfx queue")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b992a19085.
This causes regression in GPU reset related test.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: ricetons@gmail.com
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the default reset method to mode2 for SMU IP v13.0.4
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable pipe1 support starting from SIENNA CICHLID asic
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Starting from SIENNA CICHLID asic supports two gfx pipes, enabling
two graphics queues, 1 on each pipe, pipe0 queue0 would be the normal
piority queue and pipe1 queue0 would be the high priority queue
Only one queue per pipe is visble to SPI, SPI looks at the priority
value assigned to CP_GFX_HQD_QUEUE_PRIORITY from each of the queue's
HQD/MQD.
Create contexts applying AMDGPU_CTX_PRIORITY_HIGH which submits job
to the high priority queue on GFX pipe1. There would be starvation
of LP workload if HP workload is always available.
v2:
- remove unnecessary check(Nirmoy)
- make pipe1 hardware support a separate patch(Nirmoy)
- remove duplicate code(Shashank)
- add CSA support for second gfx pipe(Alex)
v3(Christian):
- fix incorrect indentation
- merge COMPUTE and GFX switch cases as both calls the same function.
v4:
- rebase w/ latest code base
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate memory for register value and use the same values for devcoredump.
v1 -> v2: Change krealloc_array() to kmalloc_array()
v2 -> v3: Fix alignment
Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Reviewed-by: Shashank Sharma <Shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
LVDS support was implemented in DC a while ago. Just DAC
support is left to do.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We know that "grbm_soft_reset" is true because we're already inside an
if (grbm_soft_reset) condition. No need to test again.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the AGP aperture on chips with GMC v11.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop all of the extra cases in the default case.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch will fix sdma doorbell issue on SDMA v6.0 and NBIO v7.7.0.
NBIO v7.7.0 uses a new reg function -- Common SDMA to allow a common
doorbell range for all SDMA queues, this is different to the old
NBIO version. This patch will add configuration for CSDMA and enable
SDMA doorbell function.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
APU required to issue the enable GFX IMU message after IMU reset.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds mmhub v3_0_1 ip block support
v2: rebase (Alex)
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch to use the callback function to poll the reset status on IMU.
Because it will have different sequency on other ASICs.
v2: drop unused variable (Alex)
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IMU has two work mode such as debug mode and mission mode. Current GC
v11_0_0 is using the debug mode.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX11 IP introduces new tiling mode. Various combinations of DCC
settings are possible and the most preferred settings must be exposed
for optimal use of the hardware.
add_gfx11_modifiers() is based on recommendation from Marek for the
preferred tiling modifier that are most efficient for the hardware.
v2: microtiling fix noticed by Marek
v3: keep Z tiling check
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
align the cg and pg settings between gc_v11_0 and gc_v11_2
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Add DCN32 to IP discovery to enable automatic initialization of AMDGPU
Display Manager
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU add a new variable mca_ceumc_addr to record
umc correctable error address in EccInfo table,
driver side add EccInfo_V2_t to support this feature
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removed trailing whitespace from end of line in amdgpu_device.c
Signed-off-by: Mitchell Augustin <kernel@mitchellaugustin.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suppress the compile warning below:
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:1292
gfx_v11_0_rlc_backdoor_autoload_copy_ucode() warn: should '1 << id' be a 64 bit type?
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The kfd_bo_list is used to restore process BOs after
evictions. As page tables could be destroyed during
evictions, we should also update pinned BOs' page tables
during restoring to make sure they are valid.
So for pinned BOs,
1, Validate them and update their page tables.
2, Don't add eviction fence for them.
v2:
- Don't handle pinned ones specially in BO validation.(Felix)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flush TLBs when existing PDEs are updated because a PTB or PDB moved,
but avoids unnecessary TLB flushes when new PDBs or PTBs are added to
the page table, which commonly happens when memory is mapped for the
first time.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add IP GC 10.3.7 in the list of target to have
tmz enabled by default.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.18.x
Adjust the sequence for ras late init and separate ras reset error status
from query status.
v2: squash in fix from Candice
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This symbol is not used outside of gfx_v11_0.c, so marks it static.
Fixes the following w1 warning:
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:1945:6: warning: no previous
prototype for function 'gfx_v11_0_rlc_stop' [-Wmissing-prototypes].
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following w1 warning:
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:5873:2: warning: unannotated
fall-through between switch labels [-Wimplicit-fallthrough].
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Wrong fb offset results in dmub f/w errors and white screen.
[drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3
[How]
Read aper_base from mmhub because GC is off by default
v2: use BAR for passthrough (Alex)
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Supports AV1. Mesa already has support for this and
doesn't rely on the kernel caps for yellow carp, so
this was already working from an application perspective.
Fixes: 554398174d ("amdgpu/nv.c - Added video codec support for Yellow Carp")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2002
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This symbol is not used outside of imu_v11_0.c, so marks it
static.
Fixes the following w1 warning:
drivers/gpu/drm/amd/amdgpu/imu_v11_0.c:302:6: warning: no previous
prototype for ‘program_imu_rlc_ram’ [-Wmissing-prototypes].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is enough to get gputop working :)
v2: rebase and some addition cleanup
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert fdinfo format to one documented in drm-usage-stats.rst.
It turned out that the existing implementation was actually completely
nonsense. The calculated percentages indeed represented the usage of the
engine, but with varying time slices.
So 10% usage for application A could mean something completely different
than 10% usage for application B.
Completely nuke that and just use the now standardized nanosecond
interface.
v2: drop the documentation change for now, nuke percentage calculation
v3: only account for each hw_ip, move the time_spend to the ctx mgr.
v4: move general ctx changes into separate patch, rework the fdinfo to
ctx_mgr interface so that all usages are calculated at once, drop
some unecessary and dangerous refcount dance.
v5: add one more comment how we calculate the time spend
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increase the minor version number to indicate that the new flags are
available.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the AMDGPU_VM_NOALLOC flag to let userspace control MALL allocation.
v2: also add the flag to the allowed flags.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a AMDGPU_GEM_CREATE_DISCARDABLE flag to note that the content of a BO
doesn't needs to be preserved during eviction.
KFD was already using a similar functionality for SVM BOs so replace the
internal flag with the new UAPI.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
