64-bit has removed the sync from _switch since commit 9145effd62
("powerpc/64: Drop explicit hwsync in context switch"). The same
logic there should apply to 32-bit. Remove the sync and replace with
a placeholder comment (32 and 64 will be merged with a later change).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230606132447.315714-4-npiggin@gmail.com
More some 64-bit specifics out from the function epilogue and rearrange
this to be a bit neater, use 32-bit mem ops for CR save/restore, and
change some register numbers.
This is preparation to consolidate 32-bit and 64-bit switch code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230606132447.315714-3-npiggin@gmail.com
The large hunk of SLB pinning in _switch asm code makes it more
difficult to see everything else that's going on. It is a less important
path now, so icache and fetch footprint overhead can be avoided.
Move context switch stack SLB pinning out of line.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230606132447.315714-2-npiggin@gmail.com
With SERIAL_8250=y and SERIAL_8250_FSL_CONSOLE=n the both
IS_ENABLED(CONFIG_SERIAL_8250) and IS_REACHABLE(CONFIG_SERIAL_8250)
evaluate to true and so fsl8250_handle_irq() is used. However this
function is only available if CONFIG_SERIAL_8250_CONSOLE=y (and thus
SERIAL_8250_FSL=y).
To prepare SERIAL_8250_FSL becoming tristate and being enabled in more
cases, check for IS_REACHABLE(CONFIG_SERIAL_8250_FSL) before making use
of fsl8250_handle_irq(). This check is correct with and without the
change to make SERIAL_8250_FSL modular.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 66eff0ef52 ("powerpc/legacy_serial: Warn about 8250 devices operated without active FSL workarounds")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Message-ID: <20230609133932.786117-2-u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do a search and replace of:
- NMI_WATCHDOG_ENABLED => WATCHDOG_HARDLOCKUP_ENABLED
- SOFT_WATCHDOG_ENABLED => WATCHDOG_SOFTOCKUP_ENABLED
- watchdog_nmi_ => watchdog_hardlockup_
- nmi_watchdog_available => watchdog_hardlockup_available
- nmi_watchdog_user_enabled => watchdog_hardlockup_user_enabled
- soft_watchdog_user_enabled => watchdog_softlockup_user_enabled
- NMI_WATCHDOG_DEFAULT => WATCHDOG_HARDLOCKUP_DEFAULT
Then update a few comments near where names were changed.
This is specifically to make it less confusing when we want to introduce
the buddy hardlockup detector, which isn't using NMIs. As part of this,
we sanitized a few names for consistency.
[trix@redhat.com: make variables static]
Link: https://lkml.kernel.org/r/20230525162822.1.I0fb41d138d158c9230573eaa37dc56afa2fb14ee@changeid
Link: https://lkml.kernel.org/r/20230519101840.v5.12.I91f7277bab4bf8c0cb238732ed92e7ce7bbd71a6@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Colin Cross <ccross@android.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cachestat is previously only wired in for x86 (and architectures using
the generic unistd.h table):
https://lore.kernel.org/lkml/20230503013608.2431726-1-nphamcs@gmail.com/
This patch wires cachestat in for all the other architectures.
[nphamcs@gmail.com: wire up cachestat for arm64]
Link: https://lkml.kernel.org/r/20230511092843.3896327-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20230510195806.2902878-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com> [s390]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Looking at generated code for handle_signal32() shows calls to a
function called __unsafe_save_user_regs.constprop.0 while user access
is open.
And that __unsafe_save_user_regs.constprop.0 function has two nops at
the begining, allowing it to be traced, which is unexpected during
user access open window.
The solution could be to mark __unsafe_save_user_regs() no trace, but
to be on the safe side the most efficient is to flag it __always_inline
as already done for function __unsafe_restore_general_regs(). The
function is relatively small and only called twice, so the size
increase will remain in the noise.
Do the same with save_tm_user_regs_unsafe() as it may suffer the
same issue.
Fixes: ef75e73182 ("powerpc/signal32: Transform save_user_regs() and save_tm_user_regs() in 'unsafe' version")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/7e469c8f01860a69c1ada3ca6a5e2aa65f0f74b2.1685955220.git.christophe.leroy@csgroup.eu
A disassembly of interrupt_exit_kernel_prepare() shows a useless read
of MSR register. This is shown by r9 being re-used immediately without
doing anything with the value read.
c000e0e0: 60 00 00 00 nop
c000e0e4: 7d 3a c2 a6 mfmd_ap r9
c000e0e8: 7d 20 00 a6 mfmsr r9
c000e0ec: 7c 51 13 a6 mtspr 81,r2
c000e0f0: 81 3f 00 84 lwz r9,132(r31)
c000e0f4: 71 29 80 00 andi. r9,r9,32768
This is due to the use of local_irq_save(). The flags read by
local_irq_save() are never used, use local_irq_disable() instead.
Fixes: 13799748b9 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/df36c6205ab64326fb1b991993c82057e92ace2f.1685955214.git.christophe.leroy@csgroup.eu
If the 8250 driver is built as a module (or built-in without console
support) the Freescale specific workaround were silently not activated.
Add a warning in this case.
Currently CONFIG_SERIAL_8250_FSL=y implies that the function
fsl8250_handle_irq() is built-in and can be used. However with the
changes of the next commit CONFIG_SERIAL_8250_FSL might be enabled also
when the 8250 driver is a module and so more care is needed when
fsl8250_handle_irq() is to be used. The code added here is able to
handle the new situation already.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-ID: <20230605130857.85543-2-u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we have raw_atomic*_<op>() definitions, there's no need to use
arch_atomic*_<op>() definitions outside of the low-level atomic
definitions.
Move treewide users of arch_atomic*_<op>() over to the equivalent
raw_atomic*_<op>().
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-19-mark.rutland@arm.com
A future change will move CLANG_FLAGS from KBUILD_{A,C}FLAGS to
KBUILD_CPPFLAGS so that '--target' is available while preprocessing.
When that occurs, the following error appears when building the compat
PowerPC vDSO:
clang: error: unsupported option '-mbig-endian' for target 'x86_64-pc-linux-gnu'
make[3]: *** [.../arch/powerpc/kernel/vdso/Makefile:76: arch/powerpc/kernel/vdso/vdso32.so.dbg] Error 1
Explicitly add CLANG_FLAGS to ldflags-y, so that '--target' will always
be present.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
For an SR-IOV device, while enabling DDW, a new table is created and
added at index 1 in the group. In the below 2 scenarios, the table is
incorrectly referenced at index 0 (which is where the table is for
default DMA window).
1. When adding DDW
This issue is exposed with "slub_debug". Error thrown out from
dma_iommu_dma_supported()
Warning: IOMMU offset too big for device mask
mask: 0xffffffff, table offset: 0x800000000000000
2. During Dynamic removal of the PCI device.
Error is from iommu_tce_table_put() since a NULL table pointer is
passed in.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230505184701.91613-1-gbatra@linux.vnet.ibm.com
When DMA window is backed by 2MB TCEs, the DMA address for the mapped
page should be the offset of the page relative to the 2MB TCE. The code
was incorrectly setting the DMA address to the beginning of the TCE
range.
Mellanox driver is reporting timeout trying to ENABLE_HCA for an SR-IOV
ethernet port, when DMA window is backed by 2MB TCEs.
Fixes: 3872731187 ("powerps/pseries/dma: Add support for 2M IOMMU page size")
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230504175913.83844-1-gbatra@linux.vnet.ibm.com
Now that power calls iommu_device_register() and populates its groups
using iommu_ops->device_group it should not be calling
iommu_group_remove_device().
The core code owns the groups and all the other related iommu data, it
will clean it up automatically.
Remove the bus notifiers and explicit calls to
iommu_group_remove_device().
Fixes: a940904443 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0-v1-1421774b874b+167-ppc_device_group_jgg@nvidia.com
Back during the discussion of
commit a9a3ed1eff ("x86: Fix early boot crash on gcc-10, third try")
we discussed the need for a function attribute to control the omission
of stack protectors on a per-function basis; at the time Clang had
support for no_stack_protector but GCC did not. This was fixed in
gcc-11. Now that the function attribute is available, let's start using
it.
Callers of boot_init_stack_canary need to use this function attribute
unless they're compiled with -fno-stack-protector, otherwise the canary
stored in the stack slot of the caller will differ upon the call to
boot_init_stack_canary. This will lead to a call to __stack_chk_fail()
then panic.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94722
Link: https://lore.kernel.org/all/20200316130414.GC12561@hirez.programming.kicks-ass.net/
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230412-no_stackp-v2-1-116f9fe4bbe7@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: ndesaulniers@google.com <ndesaulniers@google.com>
BACKGROUND
==========
When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().
However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.
While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.
This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
WHAT TO LOOK FOR
================
The conversions are from
alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
to
alloc_ordered_workqueue(flags, args...)
which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.
If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.
As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Commit e4ab08be5b ("powerpc/isa-bridge: Remove open coded "ranges"
parsing") broke PASemi Nemo board booting. The issue is the ISA I/O
range was not getting mapped as the logic to handle no "ranges" was
inverted. If phb_io_base_phys is non-zero, then the ISA range defaults
to the first 64K of the PCI I/O space. phb_io_base_phys should only be 0
when looking for a non-PCI ISA region.
Fixes: e4ab08be5b ("powerpc/isa-bridge: Remove open coded "ranges" parsing")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Link: https://lore.kernel.org/all/301595ad-0edf-2113-b55f-f5b8051ed24c@xenosoft.de/
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230505171816.3175865-1-robh@kernel.org
- Add support for building the kernel using PC-relative addressing on Power10.
- Allow HV KVM guests on Power10 to use prefixed instructions.
- Unify support for the P2020 CPU (85xx) into a single machine description.
- Always build the 64-bit kernel with 128-bit long double.
- Drop support for several obsolete 2000's era development boards as
identified by Paul Gortmaker.
- A series fixing VFIO on Power since some generic changes.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu,
Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel Stanley,
Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro Yamada, Michael
Neuling, Nathan Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin,
Nick Desaulniers, Nysal Jan K.A, Pali Rohár, Paul Gortmaker, Paul Mackerras,
Petr Vaněk, Randy Dunlap, Rob Herring, Sachin Sant, Sean Christopherson, Segher
Boessenkool, Timothy Pearson.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmRLdD8THG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgPrED/93Hwi1/8udXYV6OAFBnLLLDX9RZWNx
sj6W7PC/yY7MGUTIGcayrAURt5xFfQZMBdq9nhhH46Wyd8pSUe1IlpXIEgqeH64Y
5uaSe6u4OZ5dDmiYz8bM+Y4Ixkfq1xMO0Rj27FIRJyU4Pp6gyMQ6/8W+iPU2vYIb
jl4frVO8PpmCbW8euOyT/b9YB2h79+5nLgZT4RvmYJblKQwgzRZWaiCAU0wYf+xT
xYsMQcqJlPstizTnXIr+GC08VrMPQR51kJCurnNUMXoAQY6toEXebveWRNZ3sH39
K0BRQ036NNGPS4GlHVbjgLIdoWr4pUEROZ48Jy9WeiDh6OwO2vb2zrm7ZLtKlGXI
LCQ08T9diPbAAJyVJaKjpsNXhTffuLPRhIOr1o2vqGvY+Fqbw96bPQAyFbxpJtrw
rGTTc5e93fEdZV+eaGR8kfdNM75WM6lgiteaIbUnpirYTh/0j6YEO1Ijc4d9e5ux
aoHN2eXQDjMm9foZf1D6vaCTRyN8LwLa9hcydKCn6+qULUQzoZ2r4cRt6eSD7+fx
Wni1Zg7vD6xx294nVmhg5dWuD4qVIAZj3BZPFHHR2SPqy+UbEJLk/NKgznmrhhgQ
HBcZAEFqIBZkA4e0w6LJKh/1j1rxpZUokgjMotOJq4VRivq82W1P7SioFDY3/6w5
UvGtIgGq4Qsa2Q==
=89WH
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for building the kernel using PC-relative addressing on
Power10.
- Allow HV KVM guests on Power10 to use prefixed instructions.
- Unify support for the P2020 CPU (85xx) into a single machine
description.
- Always build the 64-bit kernel with 128-bit long double.
- Drop support for several obsolete 2000's era development boards as
identified by Paul Gortmaker.
- A series fixing VFIO on Power since some generic changes.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu,
Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel
Stanley, Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro
Yamada, Michael Neuling, Nathan Chancellor, Nathan Lynch, Nicholas
Miehlbradt, Nicholas Piggin, Nick Desaulniers, Nysal Jan K.A, Pali
Rohár, Paul Gortmaker, Paul Mackerras, Petr Vaněk, Randy Dunlap, Rob
Herring, Sachin Sant, Sean Christopherson, Segher Boessenkool, and
Timothy Pearson.
* tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits)
powerpc/64s: Disable pcrel code model on Clang
powerpc: Fix merge conflict between pcrel and copy_thread changes
powerpc/configs/powernv: Add IGB=y
powerpc/configs/64s: Drop JFS Filesystem
powerpc/configs/64s: Use EXT4 to mount EXT2 filesystems
powerpc/configs: Make pseries_defconfig an alias for ppc64le_guest
powerpc/configs: Make pseries_le an alias for ppc64le_guest
powerpc/configs: Incorporate generic kvm_guest.config into guest configs
powerpc/configs: Add IBMVETH=y and IBMVNIC=y to guest configs
powerpc/configs/64s: Enable Device Mapper options
powerpc/configs/64s: Enable PSTORE
powerpc/configs/64s: Enable VLAN support
powerpc/configs/64s: Enable BLK_DEV_NVME
powerpc/configs/64s: Drop REISERFS
powerpc/configs/64s: Use SHA512 for module signatures
powerpc/configs/64s: Enable IO_STRICT_DEVMEM
powerpc/configs/64s: Enable SCHEDSTATS
powerpc/configs/64s: Enable DEBUG_VM & other options
powerpc/configs/64s: Enable EMULATED_STATS
powerpc/configs/64s: Enable KUNIT and most tests
...
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some
major architectures it's not even consistently available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wp7f
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP cross-CPU function-call updates from Ingo Molnar:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some major
architectures it's not even consistently available.
* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
trace,smp: Trace all smp_function_call*() invocations
trace: Add trace_ipi_send_cpu()
sched, smp: Trace smp callback causing an IPI
smp: reword smp call IPI comment
treewide: Trace IPIs sent via smp_send_reschedule()
irq_work: Trace self-IPIs sent via arch_irq_work_raise()
smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
sched, smp: Trace IPIs sent via send_call_function_single_ipi()
trace: Add trace_ipi_send_cpumask()
kernel/smp: Make csdlock_debug= resettable
locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
locking/csd_lock: Remove added data from CSD lock debugging
locking/csd_lock: Add Kconfig option for csd_debug default
- Mark arch_cpu_idle_dead() __noreturn, make all architectures & drivers that did
this inconsistently follow this new, common convention, and fix all the fallout
that objtool can now detect statically.
- Fix/improve the ORC unwinder becoming unreliable due to UNWIND_HINT_EMPTY ambiguity,
split it into UNWIND_HINT_END_OF_STACK and UNWIND_HINT_UNDEFINED to resolve it.
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code.
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown/panic functions.
- Misc improvements & fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NwEV
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without Makefile.modbuiltin
or tristate.conf"). Nick has been working on this *for years* and
AFAICT I was the only one to suggest two alternatives to this approach
for tooling. The complexity in one of my suggested approaches lies in
that we'd need a possible-obj-m and a could-be-module which would check
if the object being built is part of any kconfig build which could ever
lead to it being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've
suggested would be to have a tristate in kconfig imply the same new
-DPOSSIBLE_MODULE as well but that means getting kconfig symbol names
mapping to modules always, and I don't think that's the case today. I am
not aware of Nick or anyone exploring either of these options. Quite
recently Josh Poimboeuf has pointed out that live patching, kprobes and
BPF would benefit from resolving some part of the disambiguation as
well but for other reasons. The function granularity KASLR (fgkaslr)
patches were mentioned but Joe Lawrence has clarified this effort has
been dropped with no clear solution in sight [1].
In the meantime removing module license tags from code which could never
be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up,
and so you'll see quite a bit of Nick's patches in other pull
requests for this merge window. I just picked up the stragglers after
rc3. LWN has good coverage on the motivation behind this work [2] and
the typical cross-tree issues he ran into along the way. The only
concrete blocker issue he ran into was that we should not remove the
MODULE_LICENSE() tags from files which have no SPDX tags yet, even if
they can never be modules. Nick ended up giving up on his efforts due
to having to do this vetting and backlash he ran into from folks who
really did *not understand* the core of the issue nor were providing
any alternative / guidance. I've gone through his changes and dropped
the patches which dropped the module license tags where an SPDX
license tag was missing, it only consisted of 11 drivers. To see
if a pull request deals with a file which lacks SPDX tags you
can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above,
but that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but
it demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees,
and I just picked up the slack after rc3 for the last kernel was out.
Those changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on
a systems with over 400 CPUs when KASAN was enabled due to running
out of virtual memory space. Although the functional change only
consists of 3 lines in the patch "module: avoid allocation if module is
already present and ready", proving that this was the best we can
do on the modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been
in linux-next since around rc3 of the last kernel, the actual final
fix for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported
with larger number of CPUs. Userspace is not yet fixed as it is taking
a bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge them,
but I'm currently inclined to just see if userspace can fix this
instead.
[0] https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/
[1] https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com
[2] https://lwn.net/Articles/927569/
[3] https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org
-----BEGIN PGP SIGNATURE-----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=56WK
-----END PGP SIGNATURE-----
Merge tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
-----BEGIN PGP SIGNATURE-----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=HPXl
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
iterators
PCIe native device hotplug:
- Fix AB-BA deadlock between reset_lock and device_lock
Power management:
- Wait longer for devices to become ready after resume (as we do for
reset) to accommodate Intel Titan Ridge xHCI devices
- Extend D3hot delay for NVIDIA HDA controllers to avoid
unrecoverable devices after a bus reset
Error handling:
- Clear PCIe Device Status after EDR since generic error recovery now
only clears it when AER is native
ASPM:
- Work around Chromebook firmware defect that clobbers Capability
list (including ASPM L1 PM Substates Cap) when returning from
D3cold to D0
Freescale i.MX6 PCIe controller driver:
- Install imprecise external abort handler only when DT indicates
PCIe support
Freescale Layerscape PCIe controller driver:
- Add ls1028a endpoint mode support
Qualcomm PCIe controller driver:
- Add SM8550 DT binding and driver support
- Add SDX55 DT binding and driver support
- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3
- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0
- Add DT "mhi" register region for supported SoCs
- Expose link transition counts via debugfs to help debug low power
issues
- Support system suspend and resume; reduce interconnect bandwidth
and turn off clock and PHY if there are no active devices
- Enable async probe by default to reduce boot time
Miscellaneous:
- Sort controller Kconfig entries by vendor"
* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
...
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relcations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they fail
to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up
in the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context
of different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource is
installed, i.e. timekeeping is still tick based and the tick period
advances from there.
The early enablement of sched_clock() broke this alignement as the time
accumulated by sched_clock() is taken into account when timekeeping is
initialized. So the base value now(CLOCK_MONOTONIC) is not longer a
multiple of tick periods, which breaks applications which relied on
that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements
- Cure the concurrent writer race for idle and IO sleeptime statistics
The statitic values which are exposed via /proc/stat are updated from
the CPU local idle exit and remotely by cpufreq, but that happens
without any form of serialization. As a consequence sleeptimes can be
accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
- Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race with
idle exit updates. As a consequence the readout may result in random
and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing the
remote runqueues nr_iowait counter. The latter is impossible to fix,
so the only way to deal with that is to document it properly and to
remove the assertion in the selftest which triggers occasionally due
to that.
- Restructure struct tick_sched for better cache layout
- Some small cleanups and a better cache layout for struct tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU timers
For unknown reason the introduction of the timer_wait_running() callback
missed to fixup posix CPU timers, which went unnoticed for almost four
years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels, it
turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled systems
there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU timers
out from hard interrupt context to task work, which is handled before
returning to user space or to a VM. The expiry mechanism moves the
expired timers to a stack local list head with sighand lock held. Once
sighand is dropped the task can be preempted and a task which wants to
delete a timer will spin-wait until the expiry task is scheduled back
in. In the worst case this will end up in a livelock when the preempting
task and the expiry task are pinned on the same CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which uses
a per CPU timer-base expiry lock which is held by the expiry code and the
task waiting for the timer function to complete blocks on that lock.
This does not work in the same way for posix CPU timers as there is no
timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry lock
can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry task
hold it accross the expiry function and let the deleting task which
waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra mutex_lock()/unlock()
pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents the
livelock and cures the problem for RT and !RT systems.
-----BEGIN PGP SIGNATURE-----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=SVnj
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relocations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they
fail to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up in
the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context of
different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource
is installed, i.e. timekeeping is still tick based and the tick
period advances from there.
The early enablement of sched_clock() broke this alignement as the
time accumulated by sched_clock() is taken into account when
timekeeping is initialized. So the base value now(CLOCK_MONOTONIC) is
not longer a multiple of tick periods, which breaks applications
which relied on that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements:
* Cure the concurrent writer race for idle and IO sleeptime
statistics
The statitic values which are exposed via /proc/stat are updated
from the CPU local idle exit and remotely by cpufreq, but that
happens without any form of serialization. As a consequence
sleeptimes can be accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
* Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race
with idle exit updates. As a consequence the readout may result
in random and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing
the remote runqueues nr_iowait counter. The latter is impossible
to fix, so the only way to deal with that is to document it
properly and to remove the assertion in the selftest which
triggers occasionally due to that.
* Restructure struct tick_sched for better cache layout
* Some small cleanups and a better cache layout for struct
tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU
timers
For unknown reason the introduction of the timer_wait_running()
callback missed to fixup posix CPU timers, which went unnoticed for
almost four years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels,
it turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled
systems there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU
timers out from hard interrupt context to task work, which is handled
before returning to user space or to a VM. The expiry mechanism moves
the expired timers to a stack local list head with sighand lock held.
Once sighand is dropped the task can be preempted and a task which
wants to delete a timer will spin-wait until the expiry task is
scheduled back in. In the worst case this will end up in a livelock
when the preempting task and the expiry task are pinned on the same
CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which
uses a per CPU timer-base expiry lock which is held by the expiry
code and the task waiting for the timer function to complete blocks
on that lock.
This does not work in the same way for posix CPU timers as there is
no timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry
lock can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry
task hold it accross the expiry function and let the deleting task
which waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra
mutex_lock()/unlock() pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents
the livelock and cures the problem for RT and !RT systems
* tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Implement the missing timer_wait_running callback
selftests/proc: Assert clock_gettime(CLOCK_BOOTTIME) VS /proc/uptime monotonicity
selftests/proc: Remove idle time monotonicity assertions
MAINTAINERS: Remove stale email address
timers/nohz: Remove middle-function __tick_nohz_idle_stop_tick()
timers/nohz: Add a comment about broken iowait counter update race
timers/nohz: Protect idle/iowait sleep time under seqcount
timers/nohz: Only ever update sleeptime from idle exit
timers/nohz: Restructure and reshuffle struct tick_sched
tick/common: Align tick period with the HZ tick.
selftests/timers/posix_timers: Test delivery of signals across threads
posix-timers: Prefer delivery of signals to the current thread
vdso: Improve cmd_vdso_check to check all dynamic relocations
Since commit a01353cf18 ("cpuidle: Fix ct_idle_*() usage"), the
cpuidle entry code calls trace_hardirqs_on() (actually
trace_hardirqs_on_prepare()) in ct_cpuidle_enter() before calling into
the cpuidle driver.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406144535.3786008-2-mpe@ellerman.id.au
Code in the idle path is not allowed to be instrumented because RCU is
disabled, see commit 0e985e9d22 ("cpuidle: Add comments about
noinstr/__cpuidle usage").
Mark prep_irq_for_idle() __cpuidle, which is equivalent to noinstr, to
enforce that.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406144535.3786008-1-mpe@ellerman.id.au
Build modules using PCREL addressing when CONFIG_PPC_KERNEL_PCREL=y.
- The module loader must handle several new relocation types:
* R_PPC64_REL24_NOTOC is a function call handled like R_PPC_REL24, but
does not restore r2 upon return. The external function call stub is
changed to use pcrel addressing to load the function pointer rather
than based on the module TOC.
* R_PPC64_GOT_PCREL34 is a reference to external data. A GOT table
must be built by hand, because the linker adds this during the final
link (which is not done for kernel modules). The GOT table is built
similarly to the way the external function call stub table is. This
section is called .mygot because .got has a special meaning for the
linker and can become upset.
* R_PPC64_PCREL34 is used for local data addressing, but there is a
special case where the percpu section is moved at load-time to the
percpu area which is out of range of this relocation. This requires
the PCREL34 relocations are converted to use GOT_PCREL34 addressing.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Some coding style & formatting fixups]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-7-npiggin@gmail.com
PC-Relative or PCREL addressing is an extension to the ELF ABI which
uses Power ISA v3.1 PC-relative instructions to calculate addresses,
rather than the traditional TOC scheme.
Add an option to build vmlinux using pcrel addressing. Modules continue
to use TOC addressing.
- TOC address helpers and r2 are poisoned with -1 when running vmlinux.
r2 could be used for something useful once things are ironed out.
- Assembly must call C functions with @notoc annotation, or the linker
complains aobut a missing nop after the call. This is done with the
CFUNC macro introduced earlier.
- Boot: with the exception of prom_init, the execution branches to the
kernel virtual address early in boot, before any addresses are
generated, which ensures 34-bit pcrel addressing does not miss the
high PAGE_OFFSET bits. TOC relative addressing has a similar
requirement. prom_init does not go to the virtual address and its
addresses should not carry over to the post-prom kernel.
- Ftrace trampolines are converted from TOC addressing to pcrel
addressing, including module ftrace trampolines that currently use the
kernel TOC to find ftrace target functions.
- BPF function prologue and function calling generation are converted
from TOC to pcrel.
- copypage_64.S has an interesting problem, prefixed instructions have
alignment restrictions so the linker can add padding, which makes the
assembler treat the difference between two local labels as
non-constant even if alignment is arranged so padding is not required.
This may need toolchain help to solve nicely, for now move the prefix
instruction out of the alternate patch section to work around it.
This reduces kernel text size by about 6%.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-6-npiggin@gmail.com
This macro is to be used in assembly where C functions are called.
pcrel addressing mode requires branches to functions with a
localentry value of 1 to have either a trailing nop or @notoc.
This macro permits the latter without changing callers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add dummy definitions to fix selftests build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-5-npiggin@gmail.com
Add an option to build kernel and module with prefixed instructions if
the CPU and toolchain support it.
This is not related to kernel support for userspace execution of
prefixed instructions.
Building with prefixed instructions breaks some extended inline asm
memory addressing, for example it will provide immediates that exceed
the range of simple load/store displacement. Whether this is a
toolchain or a kernel asm problem remains to be seen. For now, these
are replaced with simpler and less efficient direct register addressing
when compiling with prefixed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-4-npiggin@gmail.com
This mostly consolidates the Book3E and Book3S behaviour in boot WRT
executing from the physical or virtual address.
Book3E sets up kernel virtual linear map in start_initialization_book3e
and runs from the virtual linear alias after that. This change makes
Book3S begin to execute from the virtual alias at the same point. Book3S
can not use its MMU for that at this point, but when the MMU is disabled,
the virtual linear address correctly aliases to physical memory because
the top bits of the address are ignored with MMU disabled.
Secondaries execute from the virtual address similarly early.
This reduces the differences between subarchs, but the main motivation
was to enable the PC-relative addressing ABI for Book3S, where pointer
calculations must execute from the virtual address or the top bits of
the pointer will be lost. This is similar to the requirement the TOC
relative addressing already has that the TOC pointer use its virtual
address.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-3-npiggin@gmail.com
A later change moves the non-prom case to run at the virtual address
earlier, which calls for virtual TOC and kernel base. Split these two
calculations for prom and non-prom to make that change simpler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Retain relative_toc call for start_initialization_book3e]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-2-npiggin@gmail.com
When building with W=1 after commit 80b6093b55 ("kbuild: add -Wundef
to KBUILD_CPPFLAGS for W=1 builds"), the following warning occurs.
In file included from arch/powerpc/kvm/bookehv_interrupts.S:26:
arch/powerpc/kvm/../kernel/head_booke.h:20:6: warning: "THREAD_SHIFT" is not defined, evaluates to 0 [-Wundef]
20 | #if (THREAD_SHIFT < 15)
| ^~~~~~~~~~~~
THREAD_SHIFT is defined in thread_info.h but it is not directly included
in head_booke.h, so it is possible for THREAD_SHIFT to be undefined. Add
the include to ensure that THREAD_SHIFT is always defined.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/202304050954.yskLdczH-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230406-wundef-thread_shift_booke-v1-1-8deffa4d84f9@kernel.org
syscalls do not set the PPR field in their interrupt frame and
return from syscall always sets the default PPR for userspace,
so setting the value in the ret_from_fork frame is not necessary
and mildly inconsistent. Remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-9-npiggin@gmail.com
In the kernel user thread path, don't set _TIF_RESTOREALL because
the thread is required to call kernel_execve() before it returns,
which will set _TIF_RESTOREALL if necessary via start_thread().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-8-npiggin@gmail.com
Kernel created user threads start similarly to kernel threads in that
they call a kernel function after first returning from _switch, so
they share ret_from_kernel_thread for this. Kernel threads never return
from that function though, whereas user threads often do (although some
don't, e.g., IO threads).
Split these startup functions in two, and catch kernel threads that
improperly return from their function. This is intended to make the
complicated code a little bit easier to understand.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-7-npiggin@gmail.com
When copy_thread is given a kernel function to run in arg->fn, this
does not necessarily mean it is a kernel thread. User threads can be
created this way (e.g., kernel_init, see also x86's copy_thread()).
These threads run a kernel function which may call kernel_execve()
and return, which returns like a userspace exec(2) syscall.
Kernel threads are to be differentiated with PF_KTHREAD, will always
have arg->fn set, and should never return from that function, instead
calling kthread_exit() to exit.
Create separate paths for the kthread and user kernel thread creation
logic. The kthread path will never exit and does not require a user
interrupt frame, so it gets a minimal stack frame.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-6-npiggin@gmail.com
If the system call return path always restores NVGPRs then there is no
need for ret_from_fork to do it. The HANDLER_RESTORE_NVGPRS does the
right thing for this.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-5-npiggin@gmail.com
The kernel thread path in copy_thread creates a user interrupt frame on
stack and stores the function and arg parameters there, and
ret_from_kernel_thread loads them. This is a slightly confusing way to
overload that frame. Non-volatile registers are loaded from the switch
frame, so the parameters can be stored there. The user interrupt frame
is now only used by user threads when they return to user.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-4-npiggin@gmail.com
The ret_from_fork code for 64e and 32-bit set r3 for
syscall_exit_prepare the same way that 64s does, so there should
be no need to special-case them in copy_thread.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-3-npiggin@gmail.com
The pkey registers (AMR, IAMR) do not get loaded from the switch frame
so it is pointless to save anything there. Remove the dead code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-2-npiggin@gmail.com
Instead of open-coding it everywhere introduce a tiny helper that can be
used to iterate over each resource of a PCI device, and convert the most
obvious users into it.
While at it drop doubled empty line before pdev_sort_resources().
No functional changes intended.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230330162434.35055-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
"ranges" is a standard property with common parsing functions. Users
shouldn't be implementing their own parsing of it. Reimplement the
ISA brige "ranges" parsing using the common ranges iterator functions.
The common routines are flexible enough to work on PCI and non-PCI to
ISA bridges, so refactor pci_process_ISA_OF_ranges() and
isa_bridge_init_non_pci() into a single implementation.
Signed-off-by: Rob Herring <robh@kernel.org>
[mpe: Unsplit some strings and use pr_xxx()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230327223045.819852-1-robh@kernel.org
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix a false positive warning in __pte_needs_flush() (with DEBUG_VM=y).
- Fix oops when a PF_IO_WORKER thread tries to core dump.
- Don't try to reconfigure VAS when it's disabled.
Thanks to: Benjamin Gray, Haren Myneni, Jens Axboe, Nathan Lynch, Russell Currey.
-----BEGIN PGP SIGNATURE-----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=1Sli
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a false positive warning in __pte_needs_flush() (with DEBUG_VM=y)
- Fix oops when a PF_IO_WORKER thread tries to core dump
- Don't try to reconfigure VAS when it's disabled
Thanks to Benjamin Gray, Haren Myneni, Jens Axboe, Nathan Lynch, and
Russell Currey.
* tag 'powerpc-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/vas: Ignore VAS update for DLPAR if copy/paste is not enabled
powerpc: Don't try to copy PPR for task with NULL pt_regs
powerpc/64s: Fix __pte_needs_flush() false positive warning
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310144659.1541127-1-robh@kernel.org
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
[mpe: Drop change in ppc4xx_probe_pci_bridge(), formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310144657.1541039-1-robh@kernel.org
Add lockdep annotations for the following properties that must hold:
* Any error log retrieval must be atomically coupled with the prior
RTAS call, without a window for another RTAS call to occur before the
error log can be retrieved.
* All users of the core rtas_args parameter block must hold rtas_lock.
Move the definitions of rtas_lock and rtas_args up in the file so that
__do_enter_rtas_trace() can refer to them.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-6-010e4416f13f@linux.ibm.com
The 'filter' member is a pointer, not a bool; fix the wording
accordingly.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-4-010e4416f13f@linux.ibm.com
Add documentation for rtas_call_unlocked(), including details on how
it differs from rtas_call().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-3-010e4416f13f@linux.ibm.com
Using memcpy() isn't safe when buf is identical to rtas_err_buf, which
can happen during boot before slab is up. Full context which may not
be obvious from the diff:
if (altbuf) {
buf = altbuf;
} else {
buf = rtas_err_buf;
if (slab_is_available())
buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
}
if (buf)
memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
This was found by inspection and I'm not aware of it causing problems
in practice. It appears to have been introduced by commit
033ef338b6 ("powerpc: Merge rtas.c into arch/powerpc/kernel"); the
old ppc64 version of this code did not have this problem.
Use memmove() instead.
Fixes: 033ef338b6 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-2-010e4416f13f@linux.ibm.com
Add explicit _lazy_tlb annotated functions for lazy tlb mm refcounting.
This makes the lazy tlb mm references more obvious, and allows the
refcounting scheme to be modified in later changes. There is no
functional change with this patch.
Link: https://lkml.kernel.org/r/20230203071837.1136453-3-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
powerpc sets up PF_KTHREAD and PF_IO_WORKER with a NULL pt_regs, which
from my (arguably very short) checking is not commonly done for other
archs. This is fine, except when PF_IO_WORKER's have been created and
the task does something that causes a coredump to be generated. Then we
get this crash:
Kernel attempted to read user page (160) - exploit attempt? (uid: 1000)
BUG: Kernel NULL pointer dereference on read at 0x00000160
Faulting instruction address: 0xc0000000000c3a60
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=32 NUMA pSeries
Modules linked in: bochs drm_vram_helper drm_kms_helper xts binfmt_misc ecb ctr syscopyarea sysfillrect cbc sysimgblt drm_ttm_helper aes_generic ttm sg libaes evdev joydev virtio_balloon vmx_crypto gf128mul drm dm_mod fuse loop configfs drm_panel_orientation_quirks ip_tables x_tables autofs4 hid_generic usbhid hid xhci_pci xhci_hcd usbcore usb_common sd_mod
CPU: 1 PID: 1982 Comm: ppc-crash Not tainted 6.3.0-rc2+ #88
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c0000000000c3a60 LR: c000000000039944 CTR: c0000000000398e0
REGS: c0000000041833b0 TRAP: 0300 Not tainted (6.3.0-rc2+)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 88082828 XER: 200400f8
...
NIP memcpy_power7+0x200/0x7d0
LR ppr_get+0x64/0xb0
Call Trace:
ppr_get+0x40/0xb0 (unreliable)
__regset_get+0x180/0x1f0
regset_get_alloc+0x64/0x90
elf_core_dump+0xb98/0x1b60
do_coredump+0x1c34/0x24a0
get_signal+0x71c/0x1410
do_notify_resume+0x140/0x6f0
interrupt_exit_user_prepare_main+0x29c/0x320
interrupt_exit_user_prepare+0x6c/0xa0
interrupt_return_srr_user+0x8/0x138
Because ppr_get() is trying to copy from a PF_IO_WORKER with a NULL
pt_regs.
Check for a valid pt_regs in both ppc_get/ppr_set, and return an error
if not set. The actual error value doesn't seem to be important here, so
just pick -EINVAL.
Fixes: fa439810cc ("powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[mpe: Trim oops in change log, add Fixes & Cc stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/d9f63344-fe7c-56ae-b420-4a1a04a2ae4c@kernel.dk
To be able to trace invocations of smp_send_reschedule(), rename the
arch-specific definitions of it to arch_smp_send_reschedule() and wrap it
into an smp_send_reschedule() that contains a tracepoint.
Changes to include the declaration of the tracepoint were driven by the
following coccinelle script:
@func_use@
@@
smp_send_reschedule(...);
@include@
@@
#include <trace/events/ipi.h>
@no_include depends on func_use && !include@
@@
#include <...>
+
+ #include <trace/events/ipi.h>
[csky bits]
[riscv bits]
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230307143558.294354-6-vschneid@redhat.com
With appropriate compiler support [1], KASAN builds use __asan prefixed
meminstrinsics, and KASAN no longer overrides memcpy/memset/memmove.
If compiler support is detected (CC_HAS_KASAN_MEMINTRINSIC_PREFIX), define
memintrinsics normally (do not prefix '__').
On powerpc, KASAN is the only user of __mem functions, which are used to
define instrumented memintrinsics. Alias the normal versions for KASAN to
use in its implementation.
Link: https://lore.kernel.org/all/20230224085942.1791837-1-elver@google.com/ [1]
Link: https://lore.kernel.org/oe-kbuild-all/202302271348.U5lvmo0S-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230227094726.3833247-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The actual intention is that no dynamic relocation exists in the VDSO. For
this the VDSO build validates that the resulting .so file does not have any
relocations which are specified via $(ARCH_REL_TYPE_ABS) per architecture,
which is fragile as e.g. ARM64 lacks an entry for R_AARCH64_RELATIVE. Aside
of that ARCH_REL_TYPE_ABS is a misnomer as it checks for relative
relocations too.
However, some GNU ld ports produce unneeded R_*_NONE relocation entries. If
a port fails to determine the exact .rel[a].dyn size, the trailing zeros
become R_*_NONE relocations. E.g. ld's powerpc port recently fixed
https://sourceware.org/bugzilla/show_bug.cgi?id=29540). R_*_NONE are
generally a no-op in the dynamic loaders. So just ignore them.
Remove the ARCH_REL_TYPE_ABS defines and just validate that the resulting
.so file does not contain any R_* relocation entries except R_*_NONE.
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for aarch64
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for vDSO, aarch64
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20230310190750.3323802-1-maskray@google.com
Direct access to the struct bus_type dev_root pointer is going away soon
so replace that with a call to bus_get_dev_root() instead, which is what
it is there for.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230313182918.1312597-12-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310232850.3960676-2-mcgrof@kernel.org
ppc_md.calibrate_decr() is a mandatory item. Its nullity is never
checked so it must be non null on all platforms.
Most platforms define generic_calibrate_decr() as their
ppc_md.calibrate_decr(). Have time_init() call
generic_calibrate_decr() when ppc_md.calibrate_decr() is NULL,
and remove default assignment from all machines.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
Most probe functions do nothing else than checking whether
the machine is compatible to a given string.
Define that string in ppc_md structure and check it directly from
probe_machine() instead of using ppc_md.probe() for that.
Keep checking in ppc_md.probe() only for more complex probing.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
The current code provokes a kernel-doc warnings:
arch/powerpc/kernel/process.c:1606: warning: This comment starts with
'/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221101015452.3216-1-liubo03@inspur.com
Up until now PPC64 managed to avoid using iommu_ops. The VFIO driver
uses a SPAPR TCE sub-driver and all iommu_ops uses were kept in the
Type1 VFIO driver. Recent development added 2 uses of iommu_ops to the
generic VFIO which broke POWER:
- a coherency capability check;
- blocking IOMMU domain - iommu_group_dma_owner_claimed()/...
This adds a simple iommu_ops which reports support for cache coherency
and provides a basic support for blocking domains. No other domain types
are implemented so the default domain is NULL.
Since now iommu_ops controls the group ownership, this takes it out of
VFIO.
This adds an IOMMU device into a pci_controller (=PHB) and registers it
in the IOMMU subsystem, iommu_ops is registered at this point. This
setup is done in postcore_initcall_sync.
This replaces iommu_group_add_device() with iommu_probe_device() as the
former misses necessary steps in connecting PCI devices to IOMMU
devices. This adds a comment about why explicit iommu_probe_device() is
still needed.
The previous discussion is here:
https://lore.kernel.org/r/20220707135552.3688927-1-aik@ozlabs.ru/https://lore.kernel.org/r/20220701061751.1955857-1-aik@ozlabs.ru/
Fixes: e8ae0e140c ("vfio: Require that devices support DMA cache coherence")
Fixes: 70693f4708 ("vfio: Set DMA ownership for VFIO devices")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[mpe: Fix CONFIG_IOMMU_API=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2000135730.16998523.1678123860135.JavaMail.zimbra@raptorengineeringinc.com
Subsequent patches are going to add dependency/use of iommu_ops which is
initialized in subsys_initcall as well.
This moves pciobios_init() to the next initcall level.
This should not cause behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/12303156.16998521.1678123842049.JavaMail.zimbra@raptorengineeringinc.com
PPC64 IOMMU API defines iommu_table_group_ops which handles DMA windows
for PEs: control the ownership, create/set/unset a table the hardware
for dynamic DMA windows (DDW). VFIO uses the API to implement support on
POWER.
So far only PowerNV IODA2 (POWER8 and newer machines) implemented this
and other cases (POWER7 or nested KVM) did not and instead reused
existing iommu_table structs. This means 1) no DDW 2) ownership transfer
is done directly in the VFIO SPAPR TCE driver.
Soon POWER is going to get its own iommu_ops and ownership control is
going to move there. This implements spapr_tce_table_group_ops which
borrows iommu_table tables. The upside is that VFIO needs to know less
about POWER.
The new ops returns the existing table from create_table() and only
checks if the same window is already set. This is only going to work if
the default DMA window starts table_group.tce32_start and as big as
pe->table_group.tce32_size (not the case for IODA2+ PowerNV).
This changes iommu_table_group_ops::take_ownership() to return an error
if borrowing a table failed.
This should not cause any visible change in behavior for PowerNV.
pSeries was not that well tested/supported anyway.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[mpe: Fix CONFIG_IOMMU_API=n build (skiroot_defconfig), & formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/525438831.16998517.1678123820075.JavaMail.zimbra@raptorengineeringinc.com
module_layout manages different types of memory (text, data, rodata, etc.)
in one allocation, which is problematic for some reasons:
1. It is hard to enable CONFIG_STRICT_MODULE_RWX.
2. It is hard to use huge pages in modules (and not break strict rwx).
3. Many archs uses module_layout for arch-specific data, but it is not
obvious how these data are used (are they RO, RX, or RW?)
Improve the scenario by replacing 2 (or 3) module_layout per module with
up to 7 module_memory per module:
MOD_TEXT,
MOD_DATA,
MOD_RODATA,
MOD_RO_AFTER_INIT,
MOD_INIT_TEXT,
MOD_INIT_DATA,
MOD_INIT_RODATA,
and allocating them separately. This adds slightly more entries to
mod_tree (from up to 3 entries per module, to up to 7 entries per
module). However, this at most adds a small constant overhead to
__module_address(), which is expected to be fast.
Various archs use module_layout for different data. These data are put
into different module_memory based on their location in module_layout.
IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT;
data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc.
module_memory simplifies quite some of the module code. For example,
ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a
different allocator for the data. kernel/module/strict_rwx.c is also
much cleaner with module_memory.
Signed-off-by: Song Liu <song@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Before commit 076cbf5d2163 ("x86/xen: don't let xen_pv_play_dead()
return"), in Xen, when a previously offlined CPU was brought back
online, it unexpectedly resumed execution where it left off in the
middle of the idle loop.
There were some hacks to make that work, but the behavior was surprising
as do_idle() doesn't expect an offlined CPU to return from the dead (in
arch_cpu_idle_dead()).
Now that Xen has been fixed, and the arch-specific implementations of
arch_cpu_idle_dead() also don't return, give it a __noreturn attribute.
This will cause the compiler to complain if an arch-specific
implementation might return. It also improves code generation for both
caller and callee.
Also fixes the following warning:
vmlinux.o: warning: objtool: do_idle+0x25f: unreachable instruction
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/60d527353da8c99d4cf13b6473131d46719ed16d.1676358308.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
- Drop orphaned VAS MAINTAINERS entry.
- Fix build errors with clang and KCSAN.
- Avoid build errors seen with LD_DEAD_CODE_DATA_ELIMINATION & recordmcount.
Thanks to: Nathan Chancellor
-----BEGIN PGP SIGNATURE-----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=G47E
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Drop orphaned VAS MAINTAINERS entry
- Fix build errors with clang and KCSAN
- Avoid build errors seen with LD_DEAD_CODE_DATA_ELIMINATION together
with recordmcount
Thanks to Nathan Chancellor.
* tag 'powerpc-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Avoid dead code/data elimination when using recordmcount
powerpc/vmlinux.lds: Add .text.asan/tsan sections
powerpc: Drop orphaned VAS MAINTAINERS entry
When KASAN/KCSAN are enabled clang generates .text.asan/tsan sections.
Because they are not mentioned in the linker script warnings are
generated, and when orphan handling is set to error that becomes a build
error, eg:
ld.lld: error: vmlinux.a(init/main.o):(.text.tsan.module_ctor) is
being placed in '.text.tsan.module_ctor' ld.lld: error:
vmlinux.a(init/version.o):(.text.tsan.module_ctor) is being placed in
'.text.tsan.module_ctor'
Fix it by adding the sections to our linker script, similar to the
generic change made in 848378812e ("vmlinux.lds.h: Handle clang's
module.{c,d}tor sections").
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230222060037.2897169-1-mpe@ellerman.id.au
- Change V=1 option to print both short log and full command log.
- Allow V=1 and V=2 to be combined as V=12.
- Make W=1 detect wrong .gitignore files.
- Tree-wide cleanups for unused command line arguments passed to Clang.
- Stop using -Qunused-arguments with Clang.
- Make scripts/setlocalversion handle only correct release tags instead
of any arbitrary annotated tag.
- Create Debian and RPM source packages without cleaning the source tree.
- Various cleanups for packaging.
-----BEGIN PGP SIGNATURE-----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=HpFZ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Change V=1 option to print both short log and full command log
- Allow V=1 and V=2 to be combined as V=12
- Make W=1 detect wrong .gitignore files
- Tree-wide cleanups for unused command line arguments passed to Clang
- Stop using -Qunused-arguments with Clang
- Make scripts/setlocalversion handle only correct release tags instead
of any arbitrary annotated tag
- Create Debian and RPM source packages without cleaning the source
tree
- Various cleanups for packaging
* tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits)
kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install
docs: kbuild: remove description of KBUILD_LDS_MODULE
.gitattributes: use 'dts' diff driver for *.dtso files
kbuild: deb-pkg: improve the usability of source package
kbuild: deb-pkg: fix binary-arch and clean in debian/rules
kbuild: tar-pkg: use tar rules in scripts/Makefile.package
kbuild: make perf-tar*-src-pkg work without relying on git
kbuild: deb-pkg: switch over to source format 3.0 (quilt)
kbuild: deb-pkg: make .orig tarball a hard link if possible
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile
kbuild: srcrpm-pkg: create source package without cleaning
kbuild: rpm-pkg: build binary packages from source rpm
kbuild: deb-pkg: create source package without cleaning
kbuild: add a tool to list files ignored by git
Documentation/llvm: add Chimera Linux, Google and Meta datacenters
setlocalversion: use only the correct release tag for git-describe
setlocalversion: clean up the construction of version output
.gitignore: ignore *.cover and *.mbx
kbuild: remove --include-dir MAKEFLAG from top Makefile
kbuild: fix trivial typo in comment
...
- Support for configuring secure boot with user-defined keys on PowerVM LPARs.
- Simplify the replay of soft-masked IRQs by making it non-recursive.
- Add support for KCSAN on 64-bit Book3S.
- Improvements to the API & code which interacts with RTAS (pseries firmware).
- Change 32-bit powermac to assign PCI bus numbers per domain by default.
- Some improvements to the 32-bit BPF JIT.
- Various other small features and fixes.
Thanks to: Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin Gray, Christophe
Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand, Greg Kroah-Hartman, Jan-Benedict
Glaw, Josh Poimboeuf, Kajol Jain, Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers,
Mimi Zohar, Murphy Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin,
Pali Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika Vasireddy,
Sourabh Jain, Stefan Berger, Stephen Rothwell, Sudhakar Kuppusamy.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmP4GnkTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgEnlEAC9UoE9JM853o9ZzpOJDrbYknHsRQad
ztQJ9xu5qjkFHHryTmWKYdiAtNDFbcfn7+1aoc5FXrIb6BOfvBo/uRFw6P501Qwv
Fg0MQyWUnT5WrI7+rBE2q+1+FaHBNKLycLNRSh5JpXtuKe2ubQfiFD80tarBnEnU
6I4bqXd+xjDtnqtpfiYnil/kdZTu/MzntdkmCne6fMkflgEQFU9EVQEnnE+imqFa
6BuCwITvZ+NyaaU+cYMeGZT7aoz9PAwkksgTxXW2gQbTIApX9WX4kYU/vbW4aHts
0bpzMmIbSbAklYIu2PQQhSU0bLfKJ+xly8E8tozHgRX6hrFlqvtmD/T5LHTBD11f
FFzKb0NUCD8qTIy6Hn0M1tj5egLpxxzATPe/kVTkxxqTlZrzdSEaqzft6syyJHJd
ueo0QN53AUyBaVMtxLbnB/U/8Vnz6rLqY+8dLKzXhjYjoPJqOZh/Qlc1Tk3syPwf
E2j4H6wFqGMTOGi453Pijkpj3qpNkNT79FG5DmClcQLJxD/EXDyffLZITrkzQa0S
FEkcMzz/Hn9Hkf7ZuNo4DN6ss6IF0vlxoi7GNr+MRR53/aVQJUDc8z24c4ICl/3w
20ETk57XMVJzP++Hb+yn16JyAawfQOOlckBRZ2O8W5YYVoes45hxDQxVoh8EII69
hb3KOGYEqF5wyA==
=ECNb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for configuring secure boot with user-defined keys on PowerVM
LPARs
- Simplify the replay of soft-masked IRQs by making it non-recursive
- Add support for KCSAN on 64-bit Book3S
- Improvements to the API & code which interacts with RTAS (pseries
firmware)
- Change 32-bit powermac to assign PCI bus numbers per domain by
default
- Some improvements to the 32-bit BPF JIT
- Various other small features and fixes
Thanks to Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin
Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand,
Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain,
Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy
Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali
Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika
Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, and Sudhakar
Kuppusamy.
* tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (114 commits)
powerpc/pseries: Avoid hcall in plpks_is_available() on non-pseries
powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot
powerpc/e500: Add missing prototype for 'relocate_init'
powerpc/64: Fix unannotated intra-function call warning
powerpc/epapr: Don't use wrteei on non booke
powerpc: Pass correct CPU reference to assembler
powerpc/mm: Rearrange if-else block to avoid clang warning
powerpc/nohash: Fix build with llvm-as
powerpc/nohash: Fix build error with binutils >= 2.38
powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flags
macintosh: windfarm: Use unsigned type for 1-bit bitfields
powerpc/kexec_file: print error string on usable memory property update failure
powerpc/machdep: warn when machine_is() used too early
powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500
powerpc/eeh: Set channel state after notifying the drivers
selftests/powerpc: Fix incorrect kernel headers search path
powerpc/rtas: arch-wide function token lookup conversions
powerpc/rtas: introduce rtas_function_token() API
powerpc/pseries/lpar: convert to papr_sysparm API
powerpc/pseries/hv-24x7: convert to papr_sysparm API
...
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
- Improve the scalability of the CFS bandwidth unthrottling logic
with large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with
the generic scheduler code. Add __cpuidle methods as noinstr to
objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS,
to query previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period,
to improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- ... Misc other cleanups, fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmPzbJwRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1iIvA//ZcEaB8Z6ChLRQjM+bsaudKJu3pdLQbPK
iYbP8Da+LsAfxbEfYuGV3m+jIp0LlBOtsI/EezxQrXV+V7FvNyAX9Y00eEu/zlj8
7Jn3LMy/DBYTwH7LwVdcU0MyIVI8ZPc6WNnkx0LOtGZn8n+qfHPSDzcP3CW+a5AV
UvllPYpYyEmsX0Eby7CF4Ue8mSmbViw/xR3rNr8ZSve0c25XzKabw8O9kE3jiHxP
d/zERJoAYeDyYUEuZqhfn5dTlB4an4IjNEkAfRE5SQ09RA8Gkxsa5Ar8gob9e9M1
eQsdd4/bdhnrkM8L5qDZczqmgCTZ2bukQrxkBXhRDhLgoFxwAn77b+2ZjmIW3Lae
AyGqRcDSg1q2oxaYm5ZiuO/t26aDOZu9vPHyHRDGt95EGbZlrp+GgeePyfCigJYz
UmPdZAAcHdSymnnnlcvdG37WVvaVkpgWZzd8LbtBi23QR+Zc4WQ2IlgnUS5WKNNf
VOBcAcP6E1IslDotZDQCc2dPFFQoQQEssVooyUc5oMytm7BsvxXLOeHG+Ncu/8uc
H+U8Qn8jnqTxJbC5hkWQIJlhVKCq2FJrHxxySYTKROfUNcDgCmxboFeAcXTCIU1K
T0S+sdoTS/CvtLklRkG0j6B8N4N98mOd9cFwUV3tX+/gMLMep3hCQs5L76JagvC5
skkQXoONNaM=
=l1nN
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
objtool throws the following warning:
arch/powerpc/kernel/head_64.o: warning: objtool: .text+0x6128:
unannotated intra-function call
Fix the warning by annotating start_initialization_book3s symbol with the
SYM_FUNC_START_LOCAL and SYM_FUNC_END macros.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Fixes: 58f24eea52 ("powerpc/64s: Refactor initialisation after prom")
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230217043226.1020041-1-sv@linux.ibm.com
When a PCI error is encountered 6th time in an hour we
set the channel state to perm_failure and notify the
driver about the permanent failure.
However, after upstream commit 38ddc01147 ("powerpc/eeh:
Make permanently failed devices non-actionable"), EEH handler
stops calling any routine once the device is marked as
permanent failure. This issue can lead to fatal consequences
like kernel hang with certain PCI devices.
Following log is observed with lpfc driver, with and without
this change, Without this change kernel hangs, If PCI error
is encountered 6 times for a device in an hour.
Without the change
EEH: Beginning: 'error_detected(permanent failure)'
PCI 0132:60:00.0#600000: EEH: not actionable (1,1,1)
PCI 0132:60:00.1#600000: EEH: not actionable (1,1,1)
EEH: Finished:'error_detected(permanent failure)'
With the change
EEH: Beginning: 'error_detected(permanent failure)'
EEH: Invoking lpfc->error_detected(permanent failure)
EEH: lpfc driver reports: 'disconnect'
EEH: Invoking lpfc->error_detected(permanent failure)
EEH: lpfc driver reports: 'disconnect'
EEH: Finished:'error_detected(permanent failure)'
To fix the issue, set channel state to permanent failure after
notifying the drivers.
Fixes: 38ddc01147 ("powerpc/eeh: Make permanently failed devices non-actionable")
Suggested-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230209105649.127707-1-ganeshgr@linux.ibm.com
With the tokens for all implemented RTAS functions now available via
rtas_function_token(), which is optimal and safe for arbitrary
contexts, there is no need to use rtas_token() or cache its result.
Most conversions are trivial, but a few are worth describing in more
detail:
* Error injection token comparisons for lockdown purposes are
consolidated into a simple predicate: token_is_restricted_errinjct().
* A couple of special cases in block_rtas_call() do not use
rtas_token() but perform string comparisons against names in the
function table. These are converted to compare against token values
instead, which is logically equivalent but less expensive.
* The lookup for the ibm,os-term token can be deferred until needed,
instead of caching it at boot to avoid device tree traversal during
panic.
* Since rtas_function_token() accesses a read-only data structure
without taking any locks, xmon's lookup of set-indicator can be
performed as needed instead of cached at startup.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-20-26929c8cce78@linux.ibm.com
Users of rtas_token() supply a string argument that can't be validated
at build time. A typo or misspelling has to be caught by inspection or
by observing wrong behavior at runtime.
Since the core RTAS code now has consolidated the names of all
possible RTAS functions and mapped them to their tokens, token lookup
can be implemented using symbolic constants to index a static array.
So introduce rtas_function_token(), a replacement API which does that,
along with a rtas_service_present()-equivalent helper,
rtas_function_implemented(). Callers supply an opaque predefined
function handle which is used internally to index the function
table. Typos or other inappropriate arguments yield build errors, and
the function handle is a type that can't be easily confused with RTAS
tokens or other integer types.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-19-26929c8cce78@linux.ibm.com
Various pseries-specific RTAS functions take a temporary "work area"
parameter - a buffer in memory accessible to RTAS. Typically such
functions are passed the statically allocated rtas_data_buf buffer as
the argument. This buffer is protected by a global spinlock. So users
of rtas_data_buf cannot perform sleeping operations while accessing
the buffer.
Most RTAS functions that have a work area parameter can return a
status (-2/990x) that indicates that the caller should retry. Before
retrying, the caller may need to reschedule or sleep (see
rtas_busy_delay() for details). This combination of factors
leads to uncomfortable constructions like this:
do {
spin_lock(&rtas_data_buf_lock);
rc = rtas_call(token, __pa(rtas_data_buf, ...);
if (rc == 0) {
/* parse or copy out rtas_data_buf contents */
}
spin_unlock(&rtas_data_buf_lock);
} while (rtas_busy_delay(rc));
Another unfortunately common way of handling this is for callers to
blithely ignore the possibility of a -2/990x status and hope for the
best.
If users were allowed to perform blocking operations while owning a
work area, the programming model would become less tedious and
error-prone. Users could schedule away, sleep, or perform other
blocking operations without having to release and re-acquire
resources.
We could continue to use a single work area buffer, and convert
rtas_data_buf_lock to a mutex. But that would impose an unnecessarily
coarse serialization on all users. As awkward as the current design
is, it prevents longer running operations that need to repeatedly use
rtas_data_buf from blocking the progress of others.
There are more considerations. One is that while 4KB is fine for all
current in-kernel uses, some RTAS calls can take much smaller buffers,
and some (VPD, platform dumps) would likely benefit from larger
ones. Another is that at least one RTAS function (ibm,get-vpd)
has *two* work area parameters. And finally, we should expect the
number of work area users in the kernel to increase over time as we
introduce lockdown-compatible ABIs to replace less safe use cases
based on sys_rtas/librtas.
So a special-purpose allocator for RTAS work area buffers seems worth
trying.
Properties:
* The backing memory for the allocator is reserved early in boot in
order to satisfy RTAS addressing requirements, and then managed with
genalloc.
* Allocations can block, but they never fail (mempool-like).
* Prioritizes first-come, first-serve fairness over throughput.
* Early boot allocations before the allocator has been initialized are
served via an internal static buffer.
Intended to replace rtas_data_buf. New code that needs RTAS work area
buffers should prefer this API.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-12-26929c8cce78@linux.ibm.com
Decompose the RTAS entry C code into tracing and non-tracing variants,
calling the just-added tracepoints in the tracing-enabled path. Skip
tracing in contexts known to be unsafe (real mode, CPU offline).
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-11-26929c8cce78@linux.ibm.com
Make do_enter_rtas() take a pointer to struct rtas_args and do the
__pa() conversion in one place instead of leaving it to callers. This
also makes it possible to introduce enter/exit tracepoints that access
the rtas_args struct fields.
There's no apparent reason to force inlining of do_enter_rtas()
either, and it seems to bloat the code a bit. Let the compiler decide.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-9-26929c8cce78@linux.ibm.com
The core RTAS support code and its clients perform two types of lookup
for RTAS firmware function information.
First, mapping a known function name to a token. The typical use case
invokes rtas_token() to retrieve the token value to pass to
rtas_call(). rtas_token() relies on of_get_property(), which performs
a linear search of the /rtas node's property list under a lock with
IRQs disabled.
Second, and less common: given a token value, looking up some
information about the function. The primary example is the sys_rtas
filter path, which linearly scans a small table to match the token to
a rtas_filter struct. Another use case to come is RTAS entry/exit
tracepoints, which will require efficient lookup of function names
from token values. Currently there is no general API for this.
We need something much like the existing rtas_filters table, but more
general and organized to facilitate efficient lookups.
Introduce:
* A new rtas_function type, aggregating function name, token,
and filter. Other function characteristics could be added in the
future.
* An array of rtas_function, where each element corresponds to a known
RTAS function. All information in the table is static save the token
values, which are derived from the device tree at boot. The array is
sorted by function name to allow binary search.
* A named constant for each known RTAS function, used to index the
function array. These also will be used in a client-facing API to be
added later.
* An xarray that maps valid tokens to rtas_function objects.
Fold the existing rtas_filter table into the new rtas_function array,
with the appropriate adjustments to block_rtas_call(). Remove
now-redundant fields from struct rtas_filter. Preserve the function of
the CONFIG_CPU_BIG_ENDIAN guard in the current filter table by
introducing a per-function flag that is set for the function entries
related to pseries LPAR migration. These have never had working users
via sys_rtas on ppc64le; see commit de0f7349a0 ("powerpc/rtas:
prevent suspend-related sys_rtas use on LE").
Convert rtas_token() to use a lockless binary search on the function
table. Fall back to the old behavior for lookups against names that
are not known to be RTAS functions, but issue a warning. rtas_token()
is for function names; it is not a general facility for accessing
arbitrary properties of the /rtas node. All known misuses of
rtas_token() have been converted to more appropriate of_ APIs in
preceding changes.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-8-26929c8cce78@linux.ibm.com
Some RTAS functions that have work area parameters impose alignment
requirements on the work area passed to them by the OS. Examples
include:
- ibm,configure-connector
- ibm,update-nodes
- ibm,update-properties
4KB is the greatest alignment required by PAPR for such
buffers. rtas_data_buf used to have a __page_aligned attribute in the
arch/ppc64 days, but that was changed to __cacheline_aligned for
unknown reasons by commit 033ef338b6 ("powerpc: Merge rtas.c into
arch/powerpc/kernel"). That works out to 128-byte alignment
on ppc64, which isn't right.
This was found by inspection and I'm not aware of any real problems
caused by this. Either current RTAS implementations don't enforce the
alignment constraints, or rtas_data_buf is always being placed at a
4KB boundary by accident (or both, perhaps).
Use __aligned(SZ_4K) to ensure the rtas_data_buf has alignment
appropriate for all users.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 033ef338b6 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-6-26929c8cce78@linux.ibm.com
Some code that runs early in boot calls RTAS functions that can return
-2 or 990x statuses, which mean the caller should retry. An example is
pSeries_cmo_feature_init(), which invokes ibm,get-system-parameter but
treats these benign statuses as errors instead of retrying.
pSeries_cmo_feature_init() and similar code should be made to retry
until they succeed or receive a real error, using the usual pattern:
do {
rc = rtas_call(token, etc...);
} while (rtas_busy_delay(rc));
But rtas_busy_delay() will perform a timed sleep on any 990x
status. This isn't safe so early in boot, before the CPU scheduler and
timer subsystem have initialized.
The -2 RTAS status is much more likely to occur during single-threaded
boot than 990x in practice, at least on PowerVM. This is because -2
usually means that RTAS made progress but exhausted its self-imposed
timeslice, while 990x is associated with concurrent requests from the
OS causing internal contention. Regardless, according to the language
in PAPR, the OS should be prepared to handle either type of status at
any time.
Add a fallback path to rtas_busy_delay() to handle this as safely as
possible, performing a small delay on 990x. Include a counter to
detect retry loops that aren't making progress and bail out. Add __ref
to rtas_busy_delay() since it now conditionally calls an __init
function.
This was found by inspection and I'm not aware of any real
failures. However, the implementation of rtas_busy_delay() before
commit 38f7b7067d ("powerpc/rtas: rtas_busy_delay() improvements")
was not susceptible to this problem, so let's treat this as a
regression.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 38f7b7067d ("powerpc/rtas: rtas_busy_delay() improvements")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-1-26929c8cce78@linux.ibm.com
Before interacting with the PLPKS, we ask the hypervisor to generate a
password for the current boot, which is then required for most further
PLPKS operations.
If we kexec into a new kernel, the new kernel will try and fail to
generate a new password, as the password has already been set.
Pass the password through to the new kernel via the device tree, in
/chosen/ibm,plpks-pw. Check for the presence of this property before
trying to generate a new password - if it exists, use the existing
password and remove it from the device tree.
This only works with the kexec_file_load() syscall, not the older
kexec_load() syscall, however if you're using Secure Boot then you want
to be using kexec_file_load() anyway.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-24-ajd@linux.ibm.com
If attempting to read the size or data attributes of a non-existent
variable (which will be possible after a later patch to expose the PLPKS
via the secvar interface), don't spam the kernel log with error messages.
Only print errors for return codes that aren't ENOENT.
Reported-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-14-ajd@linux.ibm.com
Due to sysfs constraints, when writing to a variable, we can only handle
writes of up to PAGE_SIZE.
It's possible that the maximum object size is larger than PAGE_SIZE, in
which case, print a warning on boot so that the user is aware.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-13-ajd@linux.ibm.com
Currently, the list of variables is populated by calling
secvar_ops->get_next() repeatedly, which is explicitly modelled on the
OPAL API (including the keylen parameter).
For the upcoming PLPKS backend, we have a static list of variable names.
It is messy to fit that into get_next(), so instead, let the backend put
a NULL-terminated array of variable names into secvar_ops->var_names,
which will be used if get_next() is undefined.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-12-ajd@linux.ibm.com
The forthcoming pseries consumer of the secvar API wants to expose a
number of config variables. Allowing secvar implementations to provide
their own sysfs attributes makes it easy for consumers to expose what
they need to.
This is not being used by the OPAL secvar implementation at present, and
the config directory will not be created if no attributes are set.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-11-ajd@linux.ibm.com
Remove unnecessary prefixes from error messages in secvar_sysfs_init()
(the file defines pr_fmt, so putting "secvar:" in every message is
unnecessary). Make capitalisation and punctuation more consistent.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-10-ajd@linux.ibm.com
Currently the max object size is handled in the core secvar code with an
entirely OPAL-specific implementation, so create a new max_size() op and
move the existing implementation into the powernv platform. Should be
no functional change.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-9-ajd@linux.ibm.com
The code that handles the format string in secvar-sysfs.c is entirely
OPAL specific, so create a new "format" op in secvar_operations to make
the secvar code more generic. No functional change.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-8-ajd@linux.ibm.com
The secvar format string and object size sysfs files are both ASCII
text, and should use sysfs_emit(). No functional change.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-7-ajd@linux.ibm.com
The secvar code only supports one consumer at a time.
Multiple consumers aren't possible at this point in time, but we'd want
it to be obvious if it ever could happen.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-6-ajd@linux.ibm.com
There's no reason for secvar_operations to use uint64_t vs the more
common kernel type u64.
The types are compatible, but they require different printk format
strings which can lead to confusion.
Change all the secvar related routines to use u64.
Reviewed-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-5-ajd@linux.ibm.com
secvar_ops->get_next() returns -ENOENT when there are no more variables
to return, which is expected behaviour.
Fix this by returning 0 if get_next() returns -ENOENT.
This fixes an issue introduced in commit bd5d9c743d ("powerpc: expose
secure variables to userspace via sysfs"), but the return code of
secvar_sysfs_load() was never checked so this issue never mattered.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-4-ajd@linux.ibm.com
Instrumented memory accesses provided by KCSAN will access core-local
memories (which will save and restore IRQs) as well as restoring IRQs
directly. Avoid recursive instrumentation by applying __no_kcsan
annotation to IRQ restore routines.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
[mpe: Resolve merge conflict with IRQ replay recursion changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-5-rmclure@linux.ibm.com
In order for KCSAN to increase its likelihood of observing a data race,
it sets a watchpoint on memory accesses and stalls, allowing for
detection of conflicting accesses by other kernel threads or interrupts.
Stalls are implemented by injecting a call to udelay in instrumented code.
To prevent recursive instrumentation, exclude udelay from being instrumented.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-3-rmclure@linux.ibm.com
Stack validation in early boot can just bail out of checking alternate
stacks if they are not validated yet. Checking against a NULL stack
could cause NULLish pointer values to be considered valid.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-5-npiggin@gmail.com
The early paca and boot cpuid dance is complicated and currently does
not quite work as expected for boot cpuid != 0 cases.
early_init_devtree() currently allocates the paca_ptrs and boot cpuid
paca, but until that returns and early_setup() calls setup_paca(), this
thread is currently still executing with smp_processor_id() == 0.
One problem this causes is the paca_ptrs[smp_processor_id()] pointer is
poisoned, so valid_emergency_stack() (any backtrace) and any similar
users will crash.
Another is that the hardware id which is set here will not be returned
by get_hard_smp_processor_id(smp_processor_id()), but it would work
correctly for boot_cpuid == 0, which could lead to difficult to
reproduce or find bugs. The hard id does not seem to be used by the rest
of early_init_devtree(), it just looks like all this code might have
been put here to allocate somewhere to store boot CPU hardware id while
scanning the devtree.
Rearrange things so the hwid is put in a global variable like
boot_cpuid, and do all the paca allocation and boot paca setup in the
64-bit early_setup() after we have everything ready to go.
The paca_ptrs[0] re-poisoning code in early_setup does not seem to have
ever worked, because paca_ptrs[0] was never not-poisoned when boot_cpuid
is not 0.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix build error on 32-bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-4-npiggin@gmail.com
powerpc/64 can boot on a non-zero SMP processor id. Initially, the boot
CPU is said to be "assumed to be 0" until early_init_devtree() discovers
the id from the device tree. That is not a good description because the
assumption can be wrong and that has to be handled, the better
description is that 0 is used as a placeholder, and things are fixed
after the real id is discovered.
smp_processor_id() is set to the boot cpuid, but task_cpu(current) is
not, which causes the smp_processor_id() == task_cpu(current) invariant
to be broken until init_idle() in sched_init().
This is quite fragile and could lead to subtle bugs in future. One bug
is that validate_sp_size uses task_cpu() to get the process stack, so
any stack trace from the booting CPU between early_init_devtree()
and sched_init() will have problems. Early on paca_ptrs[0] will be
poisoned, so that can cause machine checks dereferencing that memory
in real mode. Later, validating the current stack pointer against the
idle task of a different secondary will probably cause no stack trace
to be printed.
Fix this by setting thread_info->cpu right after smp_processor_id() is
set to the boot cpuid.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix SMP=n build as reported by sfr]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-3-npiggin@gmail.com
As the earlier comment explains, __secondary_hold_spinloop does not have
to be accessed at its virtual address, slightly simplifying code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203113858.1152093-4-npiggin@gmail.com
Move some basic Book3S initialisation after prom to a function similar
to what Book3E looks like. Book3E returns from this function at the
virtual address mapping, and Book3S will do the same in a later change,
so making them look similar helps with that.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203113858.1152093-3-npiggin@gmail.com
That test was introducted in 2006 by
commit 00ae36de49 ("[POWERPC] Better check in show_instructions").
At that time, there was no BPF progs.
As seen in message of commit 89d21e259a ("powerpc/bpf/32: Fix Oops
on tail call tests"), when a page fault occurs in test_bpf.ko for
instance, the code is dumped as XXXXXXXXs. Allthough
__kernel_text_address() checks is_bpf_text_address(), it seems it is
not enough.
Today, show_instructions() uses get_kernel_nofault() to read the code,
so there is no real need for additional verifications.
ARM64 and x86 don't do any additional check before dumping
instructions. Do the same and remove __kernel_text_address()
in show_instructions().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4fd69ef7945518c3e27f96b95046a5c1468d35bf.1675245773.git.christophe.leroy@csgroup.eu
For all unrecoverable errors we are missing to log the
error, Since machine_check_log_err() is not getting called
for unrecoverable errors. machine_check_log_err() is called
from deferred handler, To run deferred handlers we have to do
irq work raise from the exception handler.
For recoverable errors exception vector code takes care of
running deferred handlers.
For unrecoverable errors raise irq work in save_mce_event(),
So that we log the error from MCE deferred handler.
Log without this change
MCE: CPU27: machine check (Severe) Real address Load/Store (foreign/control memory) [Not recovered]
MCE: CPU27: PID: 10580 Comm: inject-ra-err NIP: [0000000010000df4]
MCE: CPU27: Initiator CPU
MCE: CPU27: Unknown
Log with this change
MCE: CPU24: machine check (Severe) Real address Load/Store (foreign/control memory) [Not recovered]
MCE: CPU24: PID: 1589811 Comm: inject-ra-err NIP: [0000000010000e48]
MCE: CPU24: Initiator CPU
MCE: CPU24: Unknown
RTAS: event: 5, Type: Platform Error (224), Severity: 3
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230201095933.129482-1-ganeshgr@linux.ibm.com
Currently, for vmalloc areas with flag VM_IOREMAP set, except of the
specific alignment clamping in __get_vm_area_node(), they will be
1) Shown as ioremap in /proc/vmallocinfo;
2) Ignored by /proc/kcore reading via vread()
So for the io mapping in ioremap_phb() of ppc, we should set VM_IOREMAP in
flag to make it handled correctly as above.
Link: https://lkml.kernel.org/r/20230206084020.174506-7-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230202141919.2298821-1-gregkh@linuxfoundation.org
The "pci-OF-bus-map" property was declared deprecated in 2006 [1] and to
the best of everyone's knowledge is not used by anything anymore [2].
The creation of the property was disabled on powermac (arch/powerpc) in
2005 by commit 35499c0195 ("powerpc: Merge in 64-bit powermac
support."). But it is still created by default on CHRP.
On powermac the actual map (pci_to_OF_bus_map) is still used by default,
even though the device tree property is not created.
Add an option to enable/disable use of the pci_to_OF_bus_map, and
creation of the property (on CHRP).
Disabling the option allows enabling CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
which allows "normal" bus numbering and more than 256 buses, like 64-bit
and other architectures.
Mark the new option as default n, the intention is that the option and
the code will be removed in a future release.
[1]: https://lore.kernel.org/linuxppc-dev/1148016268.13249.14.camel@localhost.localdomain/
[2]: https://lore.kernel.org/all/575f239205e8635add81c9f902b7d9db7beb83ea.camel@kernel.crashing.org/
Signed-off-by: Pali Rohár <pali@kernel.org>
[mpe: Reword commit & help text, shrink option name, rework to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206113902.1857123-1-mpe@ellerman.id.au
The RFI and STF security mitigation options can flip the
interrupt_exit_not_reentrant static branch condition concurrently with
the interrupt exit code which tests that branch.
Interrupt exit tests this condition to set MSR[EE|RI] for exit, then
again in the case a soft-masked interrupt is found pending, to recover
the MSR so the interrupt can be replayed before attempting to exit
again. If the condition changes between these two tests, the MSR and irq
soft-mask state will become corrupted, leading to warnings and possible
crashes. For example, if the branch is initially true then false,
MSR[EE] will be 0 but PACA_IRQ_HARD_DIS clear and EE may not get
enabled, leading to warnings in irq_64.c.
Fixes: 13799748b9 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206042240.92103-1-npiggin@gmail.com
After commit 8d9acfce33 ("kbuild: Stop using '-Qunused-arguments' with
clang"), the PowerPC vDSO shows the following error with clang-13 and
older when CONFIG_INIT_STACK_ALL_ZERO is enabled:
clang: error: argument unused during compilation: '-enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang' [-Werror,-Wunused-command-line-argument]
clang-14 added a change to make sure this flag never triggers
-Wunused-command-line-argument, so it is fixed with newer releases. For
older releases that the kernel still supports building with, just filter
out this flag, as has been done for other flags.
Fixes: f0a42fbab4 ("powerpc/vdso: Improve linker flags")
Fixes: 8d9acfce33 ("kbuild: Stop using '-Qunused-arguments' with clang")
Link: ca6d5813d1
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPW7E8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGf7MIAI0JnHN9WvtEukSZ
E6j6+cEGWxsvD6q0g3GPolaKOCw7hlv0pWcFJFcUAt0jebspMdxV2oUGJ8RYW7Lg
nCcHvEVswGKLAQtQSWw52qotW6fUfMPsNYYB5l31sm1sKH4Cgss0W7l2HxO/1LvG
TSeNHX53vNAZ8pVnFYEWCSXC9bzrmU/VALF2EV00cdICmfvjlgkELGXoLKJJWzUp
s63fBHYGGURSgwIWOKStoO6HNo0j/F/wcSMx8leY8qDUtVKHj4v24EvSgxUSDBER
ch3LiSQ6qf4sw/z7pqruKFthKOrlNmcc0phjiES0xwwGiNhLv0z3rAhc4OM2cgYh
SDc/Y/c=
=zpaD
-----END PGP SIGNATURE-----
Merge tag 'v6.2-rc6' into sched/core, to pick up fixes
Pick up fixes before merging another batch of cpuidle updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Interrupt entry sets the soft mask to IRQS_ALL_DISABLED to match the
hard irq disabled state. So when should_hard_irq_enable() returns true
because we want PMI interrupts in irq handlers, MSR[EE] is enabled but
PMIs just get soft-masked. Fix this by clearing IRQS_PMI_DISABLED before
enabling MSR[EE].
This also tidies some of the warnings, no need to duplicate them in
both should_hard_irq_enable() and do_hard_irq_enable().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121100156.2824054-1-npiggin@gmail.com
Interrupt handlers called by soft-pending irq replay code can run
softirqs, softirq replay enables and disables local irqs, which allows
interrupts to come in including soft-masked interrupts, and it can
cause pending irqs to be replayed again. That makes the soft irq replay
state machine and possible races more complicated and fragile than it
needs to be.
Use irq_enter/irq_exit around irq replay to prevent softirqs running
while interrupts are being replayed. Softirqs will now be run at the
irq_exit() call after all the irq replaying is done. This prevents irqs
being replayed while irqs are being replayed, and should hopefully make
things simpler and easier to think about and debug.
A new PACA_IRQ_REPLAYING is added to prevent asynchronous interrupt
handlers hard-enabling EE while pending irqs are being replayed, because
that causes new pending irqs to arrive which is also a complexity. This
means pending irqs won't be profiled quite so well because perf irqs
can't be taken.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121102618.2824429-1-npiggin@gmail.com
At the time commit f97bb36f70 ("powerpc/rtas: Turn rtas lock into a
raw spinlock") was written, the spinlock lockup detection code called
__delay(), which will not make progress if the timebase is not
advancing. Since the interprocessor timebase synchronization sequence
for chrp, cell, and some now-unsupported Power models can temporarily
freeze the timebase through an RTAS function (freeze-time-base), the
lock that serializes most RTAS calls was converted to arch_spinlock_t
to prevent kernel hangs in the lockup detection code.
However, commit bc88c10d7e ("locking/spinlock/debug: Remove spinlock
lockup detection code") removed that inconvenient property from the
lock debug code several years ago. So now it should be safe to
reintroduce generic locks into the RTAS support code, primarily to
increase lockdep coverage.
Making rtas_lock a spinlock_t would violate lock type nesting rules
because it can be acquired while holding raw locks, e.g. pci_lock and
irq_desc->lock. So convert it to raw_spinlock_t. There's no apparent
reason not to upgrade timebase_lock as well.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230124140448.45938-5-nathanl@linux.ibm.com
Only code internal to the RTAS subsystem needs access to the central
lock and parameter block. Remove these from the globally visible
'rtas' struct and make them file-static in rtas.c.
Some changed lines in rtas_call() lack appropriate spacing around
operators and cause checkpatch errors; fix these as well.
Suggested-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230124140448.45938-4-nathanl@linux.ibm.com
The first symbol exports of RTAS functions and data came with the (now
removed) scanlog driver in 2003:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=f92e361842d5251e50562b09664082dcbd0548bb
At the time this was applied, EXPORT_SYMBOL_GPL() was very new, and
the exports of rtas_call() etc have remained non-GPL. As new APIs have
been added to the RTAS subsystem, their symbol exports have followed
the convention set by existing code.
However, the historical evidence is that RTAS function exports have been
added over time only to satisfy the needs of in-kernel users, and these
clients must have fairly intimate knowledge of how the APIs work to use
them safely. No out of tree users are known, and future ones seem
unlikely.
Arguably the default for RTAS symbols should have become
EXPORT_SYMBOL_GPL once it was available. Let's make it so now, and
exceptions can be evaluated as needed.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230124140448.45938-3-nathanl@linux.ibm.com
No modular code needs access to the 'rtas' struct, so remove the
symbol export.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230124140448.45938-2-nathanl@linux.ibm.com
objtool throws the following warning:
arch/powerpc/kernel/head_85xx.o: warning: objtool: .head.text+0x1a6c:
unannotated intra-function call
Fix the warning by annotating KernelSPE symbol with SYM_FUNC_START_LOCAL
and SYM_FUNC_END macros.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230128124138.1066176-1-sv@linux.ibm.com
When a module with a livepatched function is unloaded and then reloaded,
klp attempts to dynamically re-patch it. On ppc64, that fails with the
following error:
module_64: livepatch_nfsd: Expected nop after call, got e8410018 at e_show+0x60/0x548 [livepatch_nfsd]
livepatch: failed to initialize patch 'livepatch_nfsd' for module 'nfsd' (-8)
livepatch: patch 'livepatch_nfsd' failed for module 'nfsd', refusing to load module 'nfsd'
The error happens because the restore r2 instruction had already
previously been written into the klp module's replacement function when
the original function was patched the first time. So the instruction
wasn't a nop as expected.
When the restore r2 instruction has already been patched in, detect that
and skip the warning and the instruction write.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2f6329ffd9674df6ff57e03edeb2ca54414770ab.1674617130.git.jpoimboe@kernel.org
restore_r2() returns 1 on success, which is surprising for a non-boolean
function. Change it to return 0 on success and -errno on error to match
kernel coding convention.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/15baf76c271a0ae09f7b8556e50f2b4251e7049d.1674617130.git.jpoimboe@kernel.org
When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns:
clang-16: error: argument unused during compilation: '-fno-stack-clash-protection' [-Werror,-Wunused-command-line-argument]
This warning happens because vgettimeofday-32.c gets its base CFLAGS
from the main kernel, which may contain flags that are only supported on
a 64-bit target but not a 32-bit one, which is the case here.
-fstack-clash-protection and its negation are only suppported by the
64-bit powerpc target but that flag is included in an invocation for a
32-bit powerpc target, so clang points out that while the flag is one
that it recognizes, it is not actually used by this compiler job.
To eliminate the warning, remove -fno-stack-clash-protection from
vgettimeofday-32.c's CFLAGS when using clang, as has been done for other
flags previously.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, there
are several warnings in the PowerPC vDSO:
clang-16: error: -Wl,-soname=linux-vdso32.so.1: 'linker' input unused [-Werror,-Wunused-command-line-argument]
clang-16: error: -Wl,--hash-style=both: 'linker' input unused [-Werror,-Wunused-command-line-argument]
clang-16: error: argument unused during compilation: '-shared' [-Werror,-Wunused-command-line-argument]
clang-16: error: argument unused during compilation: '-nostdinc' [-Werror,-Wunused-command-line-argument]
clang-16: error: argument unused during compilation: '-Wa,-maltivec' [-Werror,-Wunused-command-line-argument]
The first group of warnings point out that linker flags were being added
to all invocations of $(CC), even though they will only be used during
the final vDSO link. Move those flags to ldflags-y.
The second group of warnings are compiler or assembler flags that will
be unused during linking. Filter them out from KBUILD_CFLAGS so that
they are not used during linking.
Additionally, '-z noexecstack' was added directly to the ld_and_check
rule in commit 1d53c0192b ("powerpc/vdso: link with -z noexecstack")
but now that there is a common ldflags variable, it can be moved there.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns:
clang-16: error: argument unused during compilation: '-s' [-Werror,-Wunused-command-line-argument]
The compiler's '-s' flag is a linking option (it is passed along to the
linker directly), which means it does nothing when the linker is not
invoked by the compiler. The kernel builds all .o files with '-c', which
stops the compilation pipeline before linking, so '-s' can be safely
dropped from ASFLAGS.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Some scripts increase the verbose level when V=1, but others when
not V=0.
I think the former is correct because V=2 is not a log level but
a switch to print the reason for rebuilding.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
zap_page_range was originally designed to unmap pages within an address
range that could span multiple vmas. While working on [1], it was
discovered that all callers of zap_page_range pass a range entirely within
a single vma. In addition, the mmu notification call within zap_page
range does not correctly handle ranges that span multiple vmas. When
crossing a vma boundary, a new mmu_notifier_range_init/end call pair with
the new vma should be made.
Instead of fixing zap_page_range, do the following:
- Create a new routine zap_vma_pages() that will remove all pages within
the passed vma. Most users of zap_page_range pass the entire vma and
can use this new routine.
- For callers of zap_page_range not passing the entire vma, instead call
zap_page_range_single().
- Remove zap_page_range.
[1] https://lore.kernel.org/linux-mm/20221114235507.294320-2-mike.kravetz@oracle.com/
Link: https://lkml.kernel.org/r/20230104002732.232573-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Suggested-by: Peter Xu <peterx@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com> [s390]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current arch_cpu_idle() is called with IRQs disabled, but will return
with IRQs enabled.
However, the very first thing the generic code does after calling
arch_cpu_idle() is raw_local_irq_disable(). This means that
architectures that can idle with IRQs disabled end up doing a
pointless 'enable-disable' dance.
Therefore, push this IRQ disabling into the idle function, meaning
that those architectures can avoid the pointless IRQ state flipping.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.618076436@infradead.org
Idle code is very like entry code in that RCU isn't available. As
such, add a little validation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.373461409@infradead.org
Although the powerpc linker script mentions .comment in the DISCARD
section, that has never actually caused it to be discarded, because the
earlier ELF_DETAILS macro (previously STABS_DEBUG) explicitly includes
.comment.
However commit 99cb0d917f ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro. With binutils < 2.36 that causes the DISCARD directives later in
the script to be applied earlier, causing .comment to actually be
discarded.
It's confusing to explicitly include and discard .comment, and even more
so if the behaviour depends on the toolchain version. So don't discard
.comment in order to maintain the existing behaviour in all cases.
Fixes: 83a092cf95 ("powerpc: Link warning for orphan sections")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-3-mpe@ellerman.id.au
Relocatable kernels must not discard relocations, they need to be
processed at runtime. As such they are included for CONFIG_RELOCATABLE
builds in the powerpc linker script (line 340).
However they are also unconditionally discarded later in the
script (line 414). Previously that worked because the earlier inclusion
superseded the discard.
However commit 99cb0d917f ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 137). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier, causing .rela* to
actually be discarded at link time, leading to build warnings and a
kernel that doesn't boot:
ld: warning: discarding dynamic section .rela.init.rodata
Fix it by conditionally discarding .rela* only when CONFIG_RELOCATABLE
is disabled.
Fixes: 99cb0d917f ("arch: fix broken BuildID for arm64 and riscv")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-2-mpe@ellerman.id.au
The powerpc linker script explicitly includes .exit.text, because
otherwise the link fails due to references from __bug_table and
__ex_table. The code is freed (discarded) at runtime along with
.init.text and data.
That has worked in the past despite powerpc not defining
RUNTIME_DISCARD_EXIT because DISCARDS appears late in the powerpc linker
script (line 410), and the explicit inclusion of .exit.text
earlier (line 280) supersedes the discard.
However commit 99cb0d917f ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 136). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier [1], causing
.exit.text to actually be discarded at link time, leading to build
errors:
'.exit.text' referenced in section '__bug_table' of crypto/algboss.o: defined in
discarded section '.exit.text' of crypto/algboss.o
'.exit.text' referenced in section '__ex_table' of drivers/nvdimm/core.o: defined in
discarded section '.exit.text' of drivers/nvdimm/core.o
Fix it by defining RUNTIME_DISCARD_EXIT, which causes the generic
DISCARDS macro to not include .exit.text at all.
1: https://lore.kernel.org/lkml/87fscp2v7k.fsf@igel.home/
Fixes: 99cb0d917f ("arch: fix broken BuildID for arm64 and riscv")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-1-mpe@ellerman.id.au
The <asm/archrandom.h> header is a random.c private detail, not
something to be called by other code. As such, don't make it
automatically available by way of random.h.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
- Add powerpc qspinlock implementation optimised for large system scalability and
paravirt. See the merge message for more details.
- Enable objtool to be built on powerpc to generate mcount locations.
- Use a temporary mm for code patching with the Radix MMU, so the writable mapping is
restricted to the patching CPU.
- Add an option to build the 64-bit big-endian kernel with the ELFv2 ABI.
- Sanitise user registers on interrupt entry on 64-bit Book3S.
- Many other small features and fixes.
Thanks to: Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn Helgaas, Bo Liu, Chen
Lifu, Christoph Hellwig, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Colin
Ian King, Deming Wang, Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven,
Gustavo A. R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol Jain,
Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan Lynch, Naveen N. Rao,
Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Randy Dunlap, Rohan McLure,
Russell Currey, Sathvika Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng, XueBing Chen, Yang
Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu, Wolfram Sang.
-----BEGIN PGP SIGNATURE-----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=7k3p
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add powerpc qspinlock implementation optimised for large system
scalability and paravirt. See the merge message for more details
- Enable objtool to be built on powerpc to generate mcount locations
- Use a temporary mm for code patching with the Radix MMU, so the
writable mapping is restricted to the patching CPU
- Add an option to build the 64-bit big-endian kernel with the ELFv2
ABI
- Sanitise user registers on interrupt entry on 64-bit Book3S
- Many other small features and fixes
Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn
Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET,
Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang,
Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A.
R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol
Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin,
Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika
Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng,
XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu,
and Wolfram Sang.
* tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits)
powerpc/code-patching: Fix oops with DEBUG_VM enabled
powerpc/qspinlock: Fix 32-bit build
powerpc/prom: Fix 32-bit build
powerpc/rtas: mandate RTAS syscall filtering
powerpc/rtas: define pr_fmt and convert printk call sites
powerpc/rtas: clean up includes
powerpc/rtas: clean up rtas_error_log_max initialization
powerpc/pseries/eeh: use correct API for error log size
powerpc/rtas: avoid scheduling in rtas_os_term()
powerpc/rtas: avoid device tree lookups in rtas_os_term()
powerpc/rtasd: use correct OF API for event scan rate
powerpc/rtas: document rtas_call()
powerpc/pseries: unregister VPA when hot unplugging a CPU
powerpc/pseries: reset the RCU watchdogs after a LPM
powerpc: Take in account addition CPU node when building kexec FDT
powerpc: export the CPU node count
powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state
powerpc/dts/fsl: Fix pca954x i2c-mux node names
cxl: Remove unnecessary cxl_pci_window_alignment()
selftests/powerpc: Fix resource leaks
...
* Randomize the per-cpu entry areas
Cleanups:
* Have CR3_ADDR_MASK use PHYSICAL_PAGE_MASK instead of open
coding it
* Move to "native" set_memory_rox() helper
* Clean up pmd_get_atomic() and i386-PAE
* Remove some unused page table size macros
-----BEGIN PGP SIGNATURE-----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=wwVF
-----END PGP SIGNATURE-----
Merge tag 'x86_mm_for_6.2_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
"New Feature:
- Randomize the per-cpu entry areas
Cleanups:
- Have CR3_ADDR_MASK use PHYSICAL_PAGE_MASK instead of open coding it
- Move to "native" set_memory_rox() helper
- Clean up pmd_get_atomic() and i386-PAE
- Remove some unused page table size macros"
* tag 'x86_mm_for_6.2_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
x86/mm: Ensure forced page table splitting
x86/kasan: Populate shadow for shared chunk of the CPU entry area
x86/kasan: Add helpers to align shadow addresses up and down
x86/kasan: Rename local CPU_ENTRY_AREA variables to shorten names
x86/mm: Populate KASAN shadow for entire per-CPU range of CPU entry area
x86/mm: Recompute physical address for every page of per-CPU CEA mapping
x86/mm: Rename __change_page_attr_set_clr(.checkalias)
x86/mm: Inhibit _PAGE_NX changes from cpa_process_alias()
x86/mm: Untangle __change_page_attr_set_clr(.checkalias)
x86/mm: Add a few comments
x86/mm: Fix CR3_ADDR_MASK
x86/mm: Remove P*D_PAGE_MASK and P*D_PAGE_SIZE macros
mm: Convert __HAVE_ARCH_P..P_GET to the new style
mm: Remove pointless barrier() after pmdp_get_lockless()
x86/mm/pae: Get rid of set_64bit()
x86_64: Remove pointless set_64bit() usage
x86/mm/pae: Be consistent with pXXp_get_and_clear()
x86/mm/pae: Use WRITE_ONCE()
x86/mm/pae: Don't (ab)use atomic64
mm/gup: Fix the lockless PMD access
...
- A ptrace API cleanup series from Sergey Shtylyov
- Fixes and cleanups for kexec from ye xingchen
- nilfs2 updates from Ryusuke Konishi
- squashfs feature work from Xiaoming Ni: permit configuration of the
filesystem's compression concurrency from the mount command line.
- A series from Akinobu Mita which addresses bound checking errors when
writing to debugfs files.
- A series from Yang Yingliang to address rapido memory leaks
- A series from Zheng Yejian to address possible overflow errors in
encode_comp_t().
- And a whole shower of singleton patches all over the place.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5efRgAKCRDdBJ7gKXxA
jgvdAP0al6oFDtaSsshIdNhrzcMwfjt6PfVxxHdLmNhF1hX2dwD/SVluS1bPSP7y
0sZp7Ustu3YTb8aFkMl96Y9m9mY1Nwg=
=ga5B
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- A ptrace API cleanup series from Sergey Shtylyov
- Fixes and cleanups for kexec from ye xingchen
- nilfs2 updates from Ryusuke Konishi
- squashfs feature work from Xiaoming Ni: permit configuration of the
filesystem's compression concurrency from the mount command line
- A series from Akinobu Mita which addresses bound checking errors when
writing to debugfs files
- A series from Yang Yingliang to address rapidio memory leaks
- A series from Zheng Yejian to address possible overflow errors in
encode_comp_t()
- And a whole shower of singleton patches all over the place
* tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (79 commits)
ipc: fix memory leak in init_mqueue_fs()
hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount
rapidio: devices: fix missing put_device in mport_cdev_open
kcov: fix spelling typos in comments
hfs: Fix OOB Write in hfs_asc2mac
hfs: fix OOB Read in __hfs_brec_find
relay: fix type mismatch when allocating memory in relay_create_buf()
ocfs2: always read both high and low parts of dinode link count
io-mapping: move some code within the include guarded section
kernel: kcsan: kcsan_test: build without structleak plugin
mailmap: update email for Iskren Chernev
eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
rapidio: fix possible UAF when kfifo_alloc() fails
relay: use strscpy() is more robust and safer
cpumask: limit visibility of FORCE_NR_CPUS
acct: fix potential integer overflow in encode_comp_t()
acct: fix accuracy loss for input value of encode_comp_t()
linux/init.h: include <linux/build_bug.h> and <linux/stringify.h>
rapidio: rio: fix possible name leak in rio_register_mport()
rapidio: fix possible name leaks when rio_add_device() fails
...
-----BEGIN PGP SIGNATURE-----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=QRhK
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
- Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and the
work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown
timer. Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync() should
be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding rearm
attempts silently. A warning for the case that a rearm attempt of a
shutdown timer is detected would not be really helpful because it's
entirely unclear how it should be acted upon. The only way to address
such a case is to add 'if (in_shutdown)' conditionals all over the
place. This is error prone and in most cases of teardown not required
all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
- Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=JlDe
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and drivers:
Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and
the work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown timer.
Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync()
should be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding
rearm attempts silently.
A warning for the case that a rearm attempt of a shutdown timer is
detected would not be really helpful because it's entirely unclear
how it should be acted upon. The only way to address such a case is
to add 'if (in_shutdown)' conditionals all over the place. This is
error prone and in most cases of teardown not required all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place"
* tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
dt-bindings: timer: renesas,cmt: Add r8a779g0 CMT support
dt-bindings: timer: renesas,tmu: Add r8a779g0 support
clocksource/drivers/arm_arch_timer: Use kstrtobool() instead of strtobool()
clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
clocksource/drivers/timer-ti-dm: Clear settings on probe and free
clocksource/drivers/timer-ti-dm: Make timer_get_irq static
clocksource/drivers/timer-ti-dm: Fix warning for omap_timer_match
clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
clocksource/drivers/timer-npcm7xx: Enable timer 1 clock before use
dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
dt-bindings: timer: rockchip: Add rockchip,rk3128-timer
clockevents: Repair kernel-doc for clockevent_delta2ns()
clocksource/drivers/ingenic-ost: Define pm functions properly in platform_driver struct
clocksource/drivers/sh_cmt: Access registers according to spec
vdso/timens: Refactor copy-pasted find_timens_vvar_page() helper into one copy
Bluetooth: hci_qca: Fix the teardown problem for real
timers: Update the documentation to reflect on the new timer_shutdown() API
timers: Provide timer_shutdown[_sync]()
timers: Add shutdown mechanism to the internal functions
timers: Split [try_to_]del_timer[_sync]() to prepare for shutdown mode
...
Add an IS_ENABLED() check to fix the build error:
arch/powerpc/kernel/prom.o: in function `early_init_dt_scan_cpus':
prom.c:(.init.text+0x2ea): undefined reference to `boot_cpu_node_count'
Fixes: e13d23a404 ("powerpc: export the CPU node count")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
CONFIG_PPC_RTAS_FILTER has been optional but default-enabled since its
introduction. It's been enabled in enterprise distro kernels for a
while without causing ABI breakage that wasn't easily fixed, and it
prevents harmful abuses of the rtas syscall.
Let's make it unconditional.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-10-nathanl@linux.ibm.com
Set pr_fmt to "rtas: " and convert the handful of printk() uses in
rtas.c, adjusting the messages to remove now-redundant "RTAS"
strings.
Note that rtas_restart(), rtas_power_off(), and rtas_halt() all
currently use printk() without specifying a log level. These have been
changed to use pr_emerg(), which matches the behavior of
rtas_os_term().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-9-nathanl@linux.ibm.com
rtas.c used to host complex code related to pseries-specific guest
migration and suspend, which used atomics, completions, hcalls, and
CPU hotplug APIs. That's all been deleted or moved, so remove the
include directives that have been rendered unnecessary. Sort the
remainder (with linux/ before asm/) to impose some order on where
future additions go.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-8-nathanl@linux.ibm.com
The code in rtas_get_error_log_max() doesn't cause problems in
practice, but there are no measures to ensure that the lazy
initialization of the static rtas_error_log_max variable is atomic,
and it's not worth adding them.
Initialize the static rtas_error_log_max variable at boot when we're
single-threaded instead of lazily on first use. Use the more
appropriate of_property_read_u32() API instead of rtas_token() to
consult the "rtas-error-log-max" property, which is not the name of an
RTAS function. Convert use of printk() to pr_warn() and distinguish
the possible error cases.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-7-nathanl@linux.ibm.com
rtas_os_term() is called during panic. Its behavior depends on a couple
of conditions in the /rtas node of the device tree, the traversal of
which entails locking and local IRQ state changes. If the kernel panics
while devtree_lock is held, rtas_os_term() as currently written could
hang.
Instead of discovering the relevant characteristics at panic time,
cache them in file-static variables at boot. Note the lookup for
"ibm,extended-os-term" is converted to of_property_read_bool() since it
is a boolean property, not an RTAS function token.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Incorporate suggested change from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-4-nathanl@linux.ibm.com
rtas_token() should be used only for properties that are RTAS function
tokens. "rtas-event-scan-rate" does not contain a function token, but it
has the same size/format as token properties so reading it with
rtas_token() happens to work.
Convert to of_property_read_u32().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-3-nathanl@linux.ibm.com
rtas_call() has a complex calling convention, non-standard return
values, and many users. Add kernel-doc for it and remove the less
structured commentary from rtas.h.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-2-nathanl@linux.ibm.com
At boot time, the FDT is parsed to compute the number of CPUs.
In addition count the number of CPU nodes and export it.
This is useful when building the FDT for a kexeced kernel since we need to
take in account the CPU node added since the boot time during CPU hotplug
operations.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221110180619.15796-2-ldufour@linux.ibm.com
Zero GPRS r14-r31 on entry into the kernel for interrupt sources to
limit influence of user-space values in potential speculation gadgets.
Prior to this commit, all other GPRS are reassigned during the common
prologue to interrupt handlers and so need not be zeroised explicitly.
This may be done safely, without loss of register state prior to the
interrupt, as the common prologue saves the initial values of
non-volatiles, which are unconditionally restored in interrupt_64.S.
Mitigation defaults to enabled by INTERRUPT_SANITIZE_REGISTERS.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221201071019.1953023-6-rmclure@linux.ibm.com
Zeroise user state in gprs (assign to zero) to reduce the influence of user
registers on speculation within kernel syscall handlers. Clears occur
at the very beginning of the sc and scv 0 interrupt handlers, with
restores occurring following the execution of the syscall handler.
Zeroise GPRS r0, r2-r11, r14-r31, on entry into the kernel for all
other interrupt sources. The remaining gprs are overwritten by
entry macros to interrupt handlers, irrespective of whether or not a
given handler consumes these register values. If an interrupt does not
select the IMSR_R12 IOption, zeroise r12.
Prior to this commit, r14-r31 are restored on a per-interrupt basis at
exit, but now they are always restored on 64bit Book3S. Remove explicit
REST_NVGPRS invocations on 64-bit Book3S. 32-bit systems do not clear
user registers on interrupt, and continue to depend on the return value
of interrupt_exit_user_prepare to determine whether or not to restore
non-volatiles.
The mmap_bench benchmark in selftests should rapidly invoke pagefaults.
See ~0.8% performance regression with this mitigation, but this
indicates the worst-case performance due to heavier-weight interrupt
handlers. This mitigation is able to be enabled/disabled through
CONFIG_INTERRUPT_SANITIZE_REGISTERS.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221201071019.1953023-5-rmclure@linux.ibm.com
Interrupt handlers in asm/exceptions-64s.S contain a great deal of common
code produced by the GEN_COMMON macros. Currently, at the exit point of
the macro, r12 will contain the contents of the MSR. A future patch will
cause these macros to zeroise architected registers to avoid potential
speculation influence of user data.
Provide an IOption that signals that r12 must be retained, as the
interrupt handler assumes it to hold the contents of the MSR.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221201071019.1953023-4-rmclure@linux.ibm.com
Interrupt code is shared between Book3E/S 64-bit systems for interrupt
handlers. Ensure that exit code correctly restores non-volatile gprs on
each system when CONFIG_INTERRUPT_SANITIZE_REGISTERS is enabled.
Also introduce macros for clearing/restoring registers on interrupt
entry for when this configuration option is either disabled or enabled.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221201071019.1953023-3-rmclure@linux.ibm.com
This affects only 64-bit ELFv2 kernels, and reduces the minimum
asm-created stack frame size from 112 to 32 byte on those kernels.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-16-npiggin@gmail.com
Most callers just want to validate an arbitrary kernel stack pointer,
some need a particular size. Make the size case the exceptional one
with an extra function.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-15-npiggin@gmail.com
Stack unwinders need LR and the back chain as a minimum. The switch
stack uses regs->nip for its return pointer rather than lrsave, so
that was not set in the fork frame, and neither was the back chain.
This change sets those fields in the stack.
With this and the previous change, a stack trace in the switch or
interrupt stack goes from looking like this:
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 3 PID: 90 Comm: systemd Not tainted
NIP: c000000000011060 LR: c000000000010f68 CTR: 0000000000007fff
[ ... regs ... ]
NIP [c000000000011060] _switch+0x160/0x17c
LR [c000000000010f68] _switch+0x68/0x17c
Call Trace:
To this:
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 0 PID: 93 Comm: systemd Not tainted
NIP: c000000000011060 LR: c000000000010f68 CTR: 0000000000007fff
[ ... regs ... ]
NIP [c000000000011060] _switch+0x160/0x17c
LR [c000000000010f68] _switch+0x68/0x17c
Call Trace:
[c000000005a93e10] [c00000000000cdbc] ret_from_fork_scv+0x0/0x54
--- interrupt: 3000 at 0x7fffa72f56d8
NIP: 00007fffa72f56d8 LR: 0000000000000000 CTR: 0000000000000000
[ ... regs ... ]
NIP [00007fffa72f56d8] 0x7fffa72f56d8
LR [0000000000000000] 0x0
--- interrupt: 3000
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-14-npiggin@gmail.com
Backtraces will not recognise the fork system call interrupt without
the regs marker. And regular interrupt entry from userspace creates
the back chain to the user stack, so do this for the initial fork
frame too, to be consistent.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-13-npiggin@gmail.com
This is open-coded in process.c, ppc32 uses a different define with the
same value, and the C definition is name differently which makes it an
extra indirection to grep for.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-12-npiggin@gmail.com
This is a count of longs from the stack pointer to the regs marker.
Rename it to make it more distinct from the other byte offsets. It
can be derived from the byte offset definitions just added.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-10-npiggin@gmail.com
This is a common offset that currently uses the overloaded
STACK_FRAME_OVERHEAD constant. It's easier to read and more
flexible to use a specific regs offset for this.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-8-npiggin@gmail.com
This makes it a bit clearer where the stack frame is created, and will
allow easier use of some of the stack offset constants in a later
change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-5-npiggin@gmail.com
Override the generic module ELF check to provide a check for the ELF ABI
version. This becomes important if we allow big-endian ELF ABI V2 builds
but it doesn't hurt to check now.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221128041539.1742489-3-npiggin@gmail.com
find_timens_vvar_page() is not architecture-specific, as can be seen from
how all five per-architecture versions of it are the same.
(arm64, powerpc and riscv are exactly the same; x86 and s390 have two
characters difference inside a comment, less blank lines, and mark the
!CONFIG_TIME_NS version as inline.)
Refactor the five copies into a central copy in kernel/time/namespace.c.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130115320.2918447-1-jannh@google.com
For the coming temporary mm used for instruction patching, the
breakpoint registers need to be cleared to prevent them from
accidentally being triggered. As soon as the patching is done, the
breakpoints will be restored.
The breakpoint state is stored in the per-cpu variable current_brk[].
Add a suspend_breakpoints() function which will clear the breakpoint
registers without touching the state in current_brk[]. Add a pair
function restore_breakpoints() which will move the state in
current_brk[] back to the registers.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221109045112.187069-2-bgray@linux.ibm.com
In hw_breakpoint_handler(), ea is set by wp_get_instr_detail() except
for 8xx, leading the variable to be passed uninitialised to
wp_check_constraints(). This is safe as wp_check_constraints() returns
early without using ea, so just set it to make the compiler happy.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221024041346.103608-1-ruscur@russell.cc
preempt_enable_no_resched() is just the same as preempt_enable() when we
are in a irqs disabled context. kprobe_handler() and the post/fault
handlers are all called with irqs disabled. As such, convert those to
just use preempt_enable().
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/72639f75fe66f931ec8c2165276ffbfb0fe1006f.1666262278.git.naveen.n.rao@linux.vnet.ibm.com
Similar to x86 commit 2e62024c26 ("kprobes/x86: Use preempt_enable()
in optimized_callback()"), change powerpc optprobes to use
preempt_enable() rather than preempt_enable_no_resched() since powerpc
also removed irq disabling for optprobes in commit f72180cc93
("powerpc/kprobes: Do not disable interrupts for optprobes and
kprobes_on_ftrace").
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1885bab182626c33d9bf6421f430abf924c521a5.1666262278.git.naveen.n.rao@linux.vnet.ibm.com
arch_prepare_kprobe() is called from register_kprobe() via
prepare_kprobe(), or through register_aggr_kprobe(), both with the
kprobe_mutex held. Per the comment for get_kprobe():
/*
* This routine is called either:
* - under the 'kprobe_mutex' - during kprobe_[un]register().
* OR
* - with preemption disabled - from architecture specific code.
*/
As such, there is no need to disable preemption around the call to
get_kprobe(). Drop the same.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1043d06a0affed83a4a46dd29466e72820ee215d.1666262278.git.naveen.n.rao@linux.vnet.ibm.com
cputime_t was a core kernel type, removed by commits
ed5c8c854f2b..b672592f0221. As explained in commit b672592f02
("sched/cputime: Remove generic asm headers"), the final cleanup
is for the arch to provide cputime_to_nsec[s](). Commit ade7667a98
("powerpc: Add cputime_to_nsecs()") did that, but justdidn't remove
the then-unused cputime_to_usecs(), cputime_t type, and associated
remnants.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221006105653.115829-1-npiggin@gmail.com
Although the previous commit made the powerpc instruction dump usable
with scripts/decodecode, there are still some problems.
Because the dump is split across multiple lines, the script doesn't cope
with printk timestamps or caller info.
That can be fixed by printing the entire dump on one line, eg:
[ 12.016307][ T112] --- interrupt: c00
[ 12.016605][ T112] Code: 4b7aae15 60000000 3d22016e 3c62ffec 39291160 38639bc0 e8890000 4b7aadf9 60000000 4bfffee8 7c0802a6 60000000 <0fe00000> 60420000 3c4c008f 384268a0
[ 12.017655][ T112] ---[ end trace 0000000000000000 ]---
That output can then be piped directly into scripts/decodecode and
interpreted correctly.
Printing the dump on a single line does produce a very long line, about
173 characters. That is still shorter than x86, which prints nearly 200
characters even without timestamps etc.
All consoles I'm aware of will wrap the line if it's too long, so the
length should not be a functional problem. If anything it should help on
consoles like VGA by using less vertical space.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221006032019.1128624-2-mpe@ellerman.id.au
Matt reported that scripts/decodecode doesn't work for the instruction
dump in the powerpc oops output. Although there are scripts around that
can decode it, it would be preferable if the standard in-tree script
worked.
All other arches prefix the instruction dump with "Code:", and that's
what the script looks for, so use that.
The script then works as expected:
$ CROSS_COMPILE=powerpc64le-linux-gnu- ./scripts/decodecode
Code:
fbc1fff0 f821ffc1 7c7d1b78 7c9c2378 ebc30028 7fdff378 48000018 60000000
60000000 ebff0008 7c3ef840 41820048 <815f0060> e93f0000 5529077c 7d295378
^D
All code
========
0: f0 ff c1 fb std r30,-16(r1)
4: c1 ff 21 f8 stdu r1,-64(r1)
8: 78 1b 7d 7c mr r29,r3
...
Note that the script doesn't cope well with printk timestamps or printk
caller info.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221006032019.1128624-1-mpe@ellerman.id.au
The kvm code was refactored to convert some of kvm assembly routines to C.
This includes commits which moved code path for the kvm guest entry/exit
for p7/8 from aseembly to C. As part of the code changes, usage of some of
the macros were removed. But definitions still exist in the assembly files.
Commits are listed below:
Commit 2e1ae9cd56 ("KVM: PPC: Book3S HV: Implement radix prefetch workaround by disabling MMU")
Commit 9769a7fd79 ("KVM: PPC: Book3S HV: Remove radix guest support from P7/8 path")
Commit fae5c9f366 ("KVM: PPC: Book3S HV: remove ISA v3.0 and v3.1 support from P7/8 path")
Commit 57dc0eed73 ("KVM: PPC: Book3S HV P9: Implement PMU save/restore in C")
Many of the asm-offset macro definitions were missed to remove. Patch
fixes by removing the unused macros.
Signed-off-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916105736.268153-2-disgoel@linux.vnet.ibm.com
Do not run objtool on VDSO files, by using OBJECT_FILES_NON_STANDARD.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-8-sv@linux.ibm.com
Fix several annotations in assembly files on PPC32.
[Sathvika Vasireddy: Changed subject line and removed Kconfig change to
enable objtool, as it is a part of "objtool/powerpc: Enable objtool to
be built on ppc" patch in this series.]
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-7-sv@linux.ibm.com
This is a simple mechanical transformation done by:
@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
.data.rel.ro* catches .data.rel.root_cpuacct, and the kernel crashes on
a store in css_clear_dir. At least we know read-only data protection is
working...
Fixes: b6adc6d6d3 ("powerpc/build: move .data.rel.ro, .sdata2 to read-only")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221116043954.3307852-1-npiggin@gmail.com
With the introduction of syscall wrappers all wrappers for syscalls with
64-bit arguments must be handled specially, not only those that have
unaligned 64-bit arguments. This left out the fallocate() and
sync_file_range2() syscalls.
Fixes: 7e92e01b72 ("powerpc: Provide syscall wrapper")
Fixes: e237506238 ("powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs")
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/87mt9cxd6g.fsf_-_@igel.home
Commit a4cb3651a1 ("powerpc/64s/interrupt: Fix lost interrupts when
returning to soft-masked context") fixed the problem of pending irqs
being cleared when clearing the HARD_DIS bit, but then it didn't clear
the bit at all. This change clears HARD_DIS without affecting other bits
in the mask.
When an interrupt hits in a soft-masked section that has MSR[EE]=1, it
can hard disable and set PACA_IRQS_HARD_DIS, which must be cleared when
returning to the EE=1 caller (unless it was set due to a MUST_HARD_MASK
interrupt becoming pending). Failure to clear this leaves the
returned-to context running with MSR[EE]=1 and PACA_IRQS_HARD_DIS, which
confuses irq assertions and could be dangerous for code that might test
the flag.
This was observed in a hash MMU kernel where a kernel hash fault hits in
a local_irqs_disabled region that has EE=1. The hash fault also runs
with EE=1, then as it returns, a decrementer hits in the restart section
and the irq restart code hard-masks which sets the PACA_IRQ_HARD_DIS
flag, which is not clear when the original context is returned to.
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: a4cb3651a1 ("powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221022052207.471328-1-npiggin@gmail.com
NMI interrupts should exit with EXCEPTION_RESTORE_REGS not with
interrupt_return_srr, which is what the perf NMI handler currently does.
This breaks if a PMI hits after interrupt_exit_user_prepare_main() has
switched the context tracking to user mode, then the CT_WARN_ON() in
interrupt_exit_kernel_prepare() fires because it returns to kernel with
context set to user.
This could possibly be solved by soft-disabling PMIs in the exit path,
but that reduces our ability to profile that code. The warning could be
removed, but it's potentially useful.
All other NMIs and soft-NMIs return using EXCEPTION_RESTORE_REGS, so
this makes perf interrupts consistent with that and seems like the best
fix.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Squash in fixups from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221006140413.126443-3-npiggin@gmail.com
NMI PMIs really should not return using the normal interrupt_return
function. If such a PMI hits in code returning to user with the context
switched to user mode, this warning can fire. This was enough to cause
crashes when reproducing on 64s, because another perf interrupt would
hit while reporting bug, and that would cause another bug, and so on
until smashing the stack.
Work around that particular crash for now by just disabling that context
warning for PMIs. This is a hack and not a complete fix, there could be
other such problems lurking in corners. But it does fix the known crash.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221014030729.2077151-3-npiggin@gmail.com
-----BEGIN PGP SIGNATURE-----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=M+mV
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
- Fix 32-bit syscall wrappers with 64-bit arguments of unaligned register-pairs.
Notably this broke ftruncate64 & pread/write64, which can lead to file corruption.
- Fix lost interrupts when returning to soft-masked context on 64-bit.
- Fix build failure when CONFIG_DTL=n.
Thanks to: Nicholas Piggin, Jason A. Donenfeld, Guenter Roeck, Arnd Bergmann, Sachin Sant.
-----BEGIN PGP SIGNATURE-----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=B+7s
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix 32-bit syscall wrappers with 64-bit arguments of unaligned
register-pairs. Notably this broke ftruncate64 & pread/write64, which
can lead to file corruption.
- Fix lost interrupts when returning to soft-masked context on 64-bit.
- Fix build failure when CONFIG_DTL=n.
Thanks to Nicholas Piggin, Jason A. Donenfeld, Guenter Roeck, Arnd
Bergmann, and Sachin Sant.
* tag 'powerpc-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Fix CONFIG_DTL=n build
powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context
powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs
It's possible for an interrupt returning to an irqs-disabled context to
lose a pending soft-masked irq because it branches to part of the exit
code for irqs-enabled contexts, which is meant to clear only the
PACA_IRQS_HARD_DIS flag from PACAIRQHAPPENED by zeroing the byte. This
just looks like a simple thinko from a recent commit (if there was no
hard mask pending, there would be no reason to clear it anyway).
This also adds comment to the code that actually does need to clear the
flag.
Fixes: e485f6c751 ("powerpc/64/interrupt: Fix return to masked context after hard-mask irq becomes pending")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221013064418.1311104-1-npiggin@gmail.com
- Valentin Schneider makes crash-kexec work properly when invoked from
an NMI-time panic.
- ntfs bugfixes from Hawkins Jiawei
- Jiebin Sun improves IPC msg scalability by replacing atomic_t's with
percpu counters.
- nilfs2 cleanups from Minghao Chi
- lots of other single patches all over the tree!
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0Yf0gAKCRDdBJ7gKXxA
joapAQDT1d1zu7T8yf9cQXkYnZVuBKCjxKE/IsYvqaq1a42MjQD/SeWZg0wV05B8
DhJPj9nkEp6R3Rj3Mssip+3vNuceAQM=
=lUQY
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- hfs and hfsplus kmap API modernization (Fabio Francesco)
- make crash-kexec work properly when invoked from an NMI-time panic
(Valentin Schneider)
- ntfs bugfixes (Hawkins Jiawei)
- improve IPC msg scalability by replacing atomic_t's with percpu
counters (Jiebin Sun)
- nilfs2 cleanups (Minghao Chi)
- lots of other single patches all over the tree!
* tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype
proc: test how it holds up with mapping'less process
mailmap: update Frank Rowand email address
ia64: mca: use strscpy() is more robust and safer
init/Kconfig: fix unmet direct dependencies
ia64: update config files
nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
fork: remove duplicate included header files
init/main.c: remove unnecessary (void*) conversions
proc: mark more files as permanent
nilfs2: remove the unneeded result variable
nilfs2: delete unnecessary checks before brelse()
checkpatch: warn for non-standard fixes tag style
usr/gen_init_cpio.c: remove unnecessary -1 values from int file
ipc/msg: mitigate the lock contention with percpu counter
percpu: add percpu_counter_add_local and percpu_counter_sub_local
fs/ocfs2: fix repeated words in comments
relay: use kvcalloc to alloc page array in relay_alloc_page_array
proc: make config PROC_CHILDREN depend on PROC_FS
fs: uninline inode_maybe_inc_iversion()
...
powerpc 32-bit system call (and function) calling convention for 64-bit
arguments requires the next available odd-pair (two sequential registers
with the first being odd-numbered) from the standard register argument
allocation.
The first argument register is r3, so a 64-bit argument that appears at
an even position in the argument list must skip a register (unless there
were preceding 64-bit arguments, which might throw things off). This
requires non-standard compat definitions to deal with the holes in the
argument register allocation.
With pt_regs syscall wrappers which use a standard mapper to map pt_regs
GPRs to function arguments, 32-bit kernels hit the same basic problem,
the standard definitions don't cope with the unused argument registers.
Fix this by having 32-bit kernels share those syscall definitions with
compat.
Thanks to Jason for spending a lot of time finding and bisecting this
and developing a trivial reproducer. The perfect bug report.
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Fixes: 7e92e01b72 ("powerpc: Provide syscall wrapper")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221012035335.866440-1-npiggin@gmail.com
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:
@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)
@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@
- RAND = get_random_u32();
... when != RAND
- RAND %= (E);
+ RAND = prandom_u32_max(E);
// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@
((T)get_random_u32()@p & (LITERAL))
// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@
value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
print("Skipping 0x%x for cleanup elsewhere" % (value))
cocci.include_match(False)
elif value & (value + 1) != 0:
print("Skipping 0x%x because it's not a power of two minus one" % (value))
cocci.include_match(False)
elif literal.startswith('0x'):
coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))
// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@
- (FUNC()@p & (LITERAL))
+ prandom_u32_max(RESULT)
@collapse_ret@
type T;
identifier VAR;
expression E;
@@
{
- T VAR;
- VAR = (E);
- return VAR;
+ return E;
}
@drop_var@
type T;
identifier VAR;
@@
{
- T VAR;
... when != VAR
}
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The merge of the kbuild tree dropped the renaming of the FSL_BOOKE
kconfig option.
Fixes: 8afc66e8d4 ("Merge tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
linux-next for a couple of months without, to my knowledge, any negative
reports (or any positive ones, come to that).
- Also the Maple Tree from Liam R. Howlett. An overlapping range-based
tree for vmas. It it apparently slight more efficient in its own right,
but is mainly targeted at enabling work to reduce mmap_lock contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
(https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com).
This has yet to be addressed due to Liam's unfortunately timed
vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down to
the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support
file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA
joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf
bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU=
=xfWx
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
From Phil Auld:
drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES
From me:
cpumask: cleanup nr_cpu_ids vs nr_cpumask_bits mess
This series cleans that mess and adds new config FORCE_NR_CPUS that
allows to optimize cpumask subsystem if the number of CPUs is known
at compile-time.
From me:
lib: optimize find_bit() functions
Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT() macros.
From me:
lib/find: add find_nth_bit()
Adds find_nth_bit(), which is ~70 times faster than bitcounting with
for_each() loop:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
Also adds bitmap_weight_and() to let people replace this pattern:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
with a single bitmap_weight_and() call.
From me:
cpumask: repair cpumask_check()
After switching cpumask to use nr_cpu_ids, cpumask_check() started
generating many false-positive warnings. This series fixes it.
From Valentin Schneider:
bitmap,cpumask: Add for_each_cpu_andnot() and for_each_cpu_andnot()
Extends the API with one more function and applies it in sched/core.
-----BEGIN PGP SIGNATURE-----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=Q/+F
-----END PGP SIGNATURE-----
Merge tag 'bitmap-6.1-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld)
- cleanup nr_cpu_ids vs nr_cpumask_bits mess (me)
This series cleans that mess and adds new config FORCE_NR_CPUS that
allows to optimize cpumask subsystem if the number of CPUs is known
at compile-time.
- optimize find_bit() functions (me)
Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT()
macros.
- add find_nth_bit() (me)
Adds find_nth_bit(), which is ~70 times faster than bitcounting with
for_each() loop:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
Also adds bitmap_weight_and() to let people replace this pattern:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
with a single bitmap_weight_and() call.
- repair cpumask_check() (me)
After switching cpumask to use nr_cpu_ids, cpumask_check() started
generating many false-positive warnings. This series fixes it.
- Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin
Schneider)
Extends the API with one more function and applies it in sched/core.
* tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits)
sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot()
lib/test_cpumask: Add for_each_cpu_and(not) tests
cpumask: Introduce for_each_cpu_andnot()
lib/find_bit: Introduce find_next_andnot_bit()
cpumask: fix checking valid cpu range
lib/bitmap: add tests for for_each() loops
lib/find: optimize for_each() macros
lib/bitmap: introduce for_each_set_bit_wrap() macro
lib/find_bit: add find_next{,_and}_bit_wrap
cpumask: switch for_each_cpu{,_not} to use for_each_bit()
net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}
cpumask: add cpumask_nth_{,and,andnot}
lib/bitmap: remove bitmap_ord_to_pos
lib/bitmap: add tests for find_nth_bit()
lib: add find_nth{,_and,_andnot}_bit()
lib/bitmap: add bitmap_weight_and()
lib/bitmap: don't call __bitmap_weight() in kernel code
tools: sync find_bit() implementation
lib/find_bit: optimize find_next_bit() functions
lib/find_bit: create find_first_zero_bit_le()
...
- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc. in case GNU Make may miss to do that when stderr is piped
to another program.
- Rewrite the single target build so it works more correctly.
- Fix rpm-pkg builds with V=1.
- List top-level subdirectories in ./Kbuild.
- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in kallsyms.
- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.
- Unify two modpost invocations to optimize the build process.
- Remove head-y syntax in favor of linker scripts for placing particular
sections in the head of vmlinux.
- Bump the minimal GNU Make version to 3.82.
- Clean up misc Makefiles and scripts.
-----BEGIN PGP SIGNATURE-----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=DHiN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc in case GNU Make may miss to do that when stderr is piped
to another program.
- Rewrite the single target build so it works more correctly.
- Fix rpm-pkg builds with V=1.
- List top-level subdirectories in ./Kbuild.
- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
kallsyms.
- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.
- Unify two modpost invocations to optimize the build process.
- Remove head-y syntax in favor of linker scripts for placing
particular sections in the head of vmlinux.
- Bump the minimal GNU Make version to 3.82.
- Clean up misc Makefiles and scripts.
* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
docs: bump minimal GNU Make version to 3.82
ia64: simplify esi object addition in Makefile
Revert "kbuild: Check if linker supports the -X option"
kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
zstd: Fixing mixed module-builtin objects
kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
kallsyms: take the input file instead of reading stdin
kallsyms: drop duplicated ignore patterns from kallsyms.c
kbuild: reuse mksysmap output for kallsyms
mksysmap: update comment about __crc_*
kbuild: remove head-y syntax
kbuild: use obj-y instead extra-y for objects placed at the head
kbuild: hide error checker logs for V=1 builds
kbuild: re-run modpost when it is updated
kbuild: unify two modpost invocations
kbuild: move vmlinux.o rule to the top Makefile
kbuild: move .vmlinux.objs rule to Makefile.modpost
kbuild: list sub-directories in ./Kbuild
Makefile.compiler: replace cc-ifversion with compiler-specific macros
...
- PMU driver updates:
- Add AMD Last Branch Record Extension Version 2 (LbrExtV2)
feature support for Zen 4 processors.
- Extend the perf ABI to provide branch speculation information,
if available, and use this on CPUs that have it (eg. LbrExtV2).
- Improve Intel PEBS TSC timestamp handling & integration.
- Add Intel Raptor Lake S CPU support.
- Add 'perf mem' and 'perf c2c' memory profiling support on
AMD CPUs by utilizing IBS tagged load/store samples.
- Clean up & optimize various x86 PMU details.
- HW breakpoints:
- Big rework to optimize the code for systems with hundreds of CPUs and
thousands of breakpoints:
- Replace the nr_bp_mutex global mutex with the bp_cpuinfo_sem
per-CPU rwsem that is read-locked during most of the key operations.
- Improve the O(#cpus * #tasks) logic in toggle_bp_slot()
and fetch_bp_busy_slots().
- Apply micro-optimizations & cleanups.
- Misc cleanups & enhancements.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LcGg
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"PMU driver updates:
- Add AMD Last Branch Record Extension Version 2 (LbrExtV2) feature
support for Zen 4 processors.
- Extend the perf ABI to provide branch speculation information, if
available, and use this on CPUs that have it (eg. LbrExtV2).
- Improve Intel PEBS TSC timestamp handling & integration.
- Add Intel Raptor Lake S CPU support.
- Add 'perf mem' and 'perf c2c' memory profiling support on AMD CPUs
by utilizing IBS tagged load/store samples.
- Clean up & optimize various x86 PMU details.
HW breakpoints:
- Big rework to optimize the code for systems with hundreds of CPUs
and thousands of breakpoints:
- Replace the nr_bp_mutex global mutex with the bp_cpuinfo_sem
per-CPU rwsem that is read-locked during most of the key
operations.
- Improve the O(#cpus * #tasks) logic in toggle_bp_slot() and
fetch_bp_busy_slots().
- Apply micro-optimizations & cleanups.
- Misc cleanups & enhancements"
* tag 'perf-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
perf/hw_breakpoint: Annotate tsk->perf_event_mutex vs ctx->mutex
perf: Fix pmu_filter_match()
perf: Fix lockdep_assert_event_ctx()
perf/x86/amd/lbr: Adjust LBR regardless of filtering
perf/x86/utils: Fix uninitialized var in get_branch_type()
perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header file
perf/x86/amd: Support PERF_SAMPLE_PHY_ADDR
perf/x86/amd: Support PERF_SAMPLE_ADDR
perf/x86/amd: Support PERF_SAMPLE_{WEIGHT|WEIGHT_STRUCT}
perf/x86/amd: Support PERF_SAMPLE_DATA_SRC
perf/x86/amd: Add IBS OP_DATA2 DataSrc bit definitions
perf/mem: Introduce PERF_MEM_LVLNUM_{EXTN_MEM|IO}
perf/x86/uncore: Add new Raptor Lake S support
perf/x86/cstate: Add new Raptor Lake S support
perf/x86/msr: Add new Raptor Lake S support
perf/x86: Add new Raptor Lake S support
bpf: Check flags for branch stack in bpf_read_branch_records helper
perf, hw_breakpoint: Fix use-after-free if perf_event_open() fails
perf: Use sample_flags for raw_data
perf: Use sample_flags for addr
...
- Remove our now never-true definitions for pgd_huge() and p4d_leaf().
- Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit.
- Add support for syscall wrappers.
- Add support for KFENCE on 64-bit.
- Update 64-bit HV KVM to use the new guest state entry/exit accounting API.
- Support execute-only memory when using the Radix MMU (P9 or later).
- Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests.
- Updates to our linker script to move more data into read-only sections.
- Allow the VDSO to be randomised on 32-bit.
- Many other small features and fixes.
Thanks to: Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Christophe
Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas, Gaosheng Cui, Gustavo A. R. Silva,
Haren Myneni, Hari Bathini, Jilin Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan
Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Rohan McLure,
Russell Currey, Sachin Sant, Segher Boessenkool, Shrikanth Hegde, Tyrel Datwyler, Wolfram
Sang, ye xingchen, Zheng Yongjun.
-----BEGIN PGP SIGNATURE-----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=TFBA
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Remove our now never-true definitions for pgd_huge() and p4d_leaf().
- Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit.
- Add support for syscall wrappers.
- Add support for KFENCE on 64-bit.
- Update 64-bit HV KVM to use the new guest state entry/exit accounting
API.
- Support execute-only memory when using the Radix MMU (P9 or later).
- Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests.
- Updates to our linker script to move more data into read-only
sections.
- Allow the VDSO to be randomised on 32-bit.
- Many other small features and fixes.
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Christophe Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas,
Gaosheng Cui, Gustavo A. R. Silva, Haren Myneni, Hari Bathini, Jilin
Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent
Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan
Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali
Rohár, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool,
Shrikanth Hegde, Tyrel Datwyler, Wolfram Sang, ye xingchen, and Zheng
Yongjun.
* tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
KVM: PPC: Book3S HV: Fix stack frame regs marker
powerpc: Don't add __powerpc_ prefix to syscall entry points
powerpc/64s/interrupt: Fix stack frame regs marker
powerpc/64: Fix msr_check_and_set/clear MSR[EE] race
powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARN
powerpc/pseries: Add firmware details to the hardware description
powerpc/powernv: Add opal details to the hardware description
powerpc: Add device-tree model to the hardware description
powerpc/64: Add logical PVR to the hardware description
powerpc: Add PVR & CPU name to hardware description
powerpc: Add hardware description string
powerpc/configs: Enable PPC_UV in powernv_defconfig
powerpc/configs: Update config files for removed/renamed symbols
powerpc/mm: Fix UBSAN warning reported on hugetlb
powerpc/mm: Always update max/min_low_pfn in mem_topology_setup()
powerpc/mm/book3s/hash: Rename flush_tlb_pmd_range
powerpc: Drops STABS_DEBUG from linker scripts
powerpc/64s: Remove lost/old comment
powerpc/64s: Remove old STAB comment
powerpc: remove orphan systbl_chk.sh
...
When using syscall wrappers the __SYSCALL_DEFINEx() and related macros
add a "__powerpc_" prefix to all syscall entry points.
So for example sys_mmap becomes __powerpc_sys_mmap.
This risks breaking workflows and tools that expect the old naming
scheme. At a minimum setting a breakpoint on eg. sys_mmap with gdb no
longer works.
There seems to be no compelling reason to add the "__powerpc_" prefix,
other than that it follows what some other arches do (x86, arm64, s390).
But unlike other arches powerpc doesn't always enable syscall wrappers,
so the syscall entry points can change name depending on CONFIG options.
For those reasons drop the "__powerpc_" prefix, reverting to the
existing naming.
Doing so reveals two prototypes in signal.h that have the incorrect type
when syscall wrappers are enabled. There are already prototypes for both
functions in syscalls.h, so drop the ones from signal.h.
Fixes: 7e92e01b72 ("powerpc: Provide syscall wrapper")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221006135940.1223988-1-mpe@ellerman.id.au
The value of the stack frame regs marker that gets saved on the stack in
interrupt entry code does not match the regs marker value, which breaks
stack frame marker matching.
This stray instruction looks to have been introduced in a mismerge.
Fixes: bf75a3258a ("powerpc/64s/interrupt: move early boot ILE fixup into a macro")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Mismerge by yours truly -_-]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221004132952.984341-1-npiggin@gmail.com
irq soft-masking means that when Linux irqs are disabled, the MSR[EE]
value can change from 1 to 0 asynchronously: if a masked interrupt of
the PACA_IRQ_MUST_HARD_MASK variety fires while irqs are disabled,
the masked handler will return with MSR[EE]=0.
This means a sequence like mtmsr(mfmsr() | MSR_FP) is racy if it can
be called with local irqs disabled, unless a hard_irq_disable has been
done.
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221004051157.308999-2-npiggin@gmail.com
This new assertion added is generally harmless and gets fixed up
naturally, but it does indicate a problem with MSR manipulation
somewhere.
Fixes: c39fb71a54 ("powerpc/64s/interrupt: masked handler debug check for previous hard disable")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221004051157.308999-1-npiggin@gmail.com
The objects placed at the head of vmlinux need special treatments:
- arch/$(SRCARCH)/Makefile adds them to head-y in order to place
them before other archives in the linker command line.
- arch/$(SRCARCH)/kernel/Makefile adds them to extra-y instead of
obj-y to avoid them going into built-in.a.
This commit gets rid of the latter.
Create vmlinux.a to collect all the objects that are unconditionally
linked to vmlinux. The objects listed in head-y are moved to the head
of vmlinux.a by using 'ar m'.
With this, arch/$(SRCARCH)/kernel/Makefile can consistently use obj-y
for builtin objects.
There is no *.o that is directly linked to vmlinux. Drop unneeded code
in scripts/clang-tools/gen_compile_commands.py.
$(AR) mPi needs 'T' to workaround the llvm-ar bug. The fix was suggested
by Nathan Chancellor [1].
[1]: https://lore.kernel.org/llvm/YyjjT5gQ2hGMH0ni@dev-arch.thelio-3990X/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Add the model of the machine we're on to the hardware description, which
is printed at boot and in case of an oops.
eg: Hardware name: IBM,8247-22L
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930082709.55830-4-mpe@ellerman.id.au
If we detect a logical PVR add that to the hardware description, which
is printed at boot and in case of an oops.
eg: Hardware name: ... 0xf000004
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930082709.55830-3-mpe@ellerman.id.au
Add the PVR and CPU name to the hardware description, which is printed
at boot and in case of an oops.
eg: Hardware name: ... POWER8E (raw) 0x4b0201
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930082709.55830-2-mpe@ellerman.id.au
Create a hardware description string, which we will use to record
various details of the hardware platform we are running on.
Print the accumulated description at boot, and use it to set the generic
description which is printed in oopses.
To begin with add ppc_md.name, aka the "machine description".
Example output at boot with the full series applied:
Linux version 6.0.0-rc2-gcc-11.1.0-00199-g893f9007a5ce-dirty (michael@alpine1-p1) (powerpc64-linux-gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #844 SMP Thu Sep 29 22:29:53 AEST 2022
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1200 0xf000005 of:SLOF,git-5b4c5a pSeries
printk: bootconsole [udbg0] enabled
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930082709.55830-1-mpe@ellerman.id.au
No toolchain we support should be generating stabs debug information
anymore. Drop the sections entirely from our linker scripts.
We removed all the manual stabs annotations in commit
1231816373 ("powerpc/32: Remove remaining .stabs annotations").
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220928130951.1732983-1-mpe@ellerman.id.au
This used to be about the 0x4300 handler, but that was moved in commit
da2bc4644c ("powerpc/64s: Add new exception vector macros").
Note that "STAB" here refers to "Segment Table" not the debug format.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220928130912.1732466-1-mpe@ellerman.id.au
arch/powerpc/kernel/systbl_chk.sh has not been referenced since commit
ab66dcc76d ("powerpc: generate uapi header and system call table
files"). Remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220929032120.3592593-1-npiggin@gmail.com
The data storage interrupt (DSI) error will be generated when the
paste operation is issued on the suspended Nest Accelerator (NX)
window due to NX state changes. The hypervisor expects the
partition to ignore this error during page fault handling.
To differentiate DSI caused by an actual HW configuration or by
the NX window, a new “ibm,pi-features” type value is defined.
Byte 0, bit 3 of pi-attribute-specifier-type is now defined to
indicate this DSI error. If this error is not ignored, the user
space can get SIGBUS when the NX request is issued.
This patch adds changes to read ibm,pi-features property and ignore
DSI error during page fault handling if MMU_FTR_NX_DSI is defined.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Mention PAPR version in comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b9cd844b85eb8f70459109ce1b14e44c4cc85fa7.camel@linux.ibm.com
I found a null pointer reference in arch_prepare_kprobe():
# echo 'p cmdline_proc_show' > kprobe_events
# echo 'p cmdline_proc_show+16' >> kprobe_events
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc000000000050bfc
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 122 Comm: sh Not tainted 6.0.0-rc3-00007-gdcf8e5633e2e #10
NIP: c000000000050bfc LR: c000000000050bec CTR: 0000000000005bdc
REGS: c0000000348475b0 TRAP: 0300 Not tainted (6.0.0-rc3-00007-gdcf8e5633e2e)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 88002444 XER: 20040006
CFAR: c00000000022d100 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 0
...
NIP arch_prepare_kprobe+0x10c/0x2d0
LR arch_prepare_kprobe+0xfc/0x2d0
Call Trace:
0xc0000000012f77a0 (unreliable)
register_kprobe+0x3c0/0x7a0
__register_trace_kprobe+0x140/0x1a0
__trace_kprobe_create+0x794/0x1040
trace_probe_create+0xc4/0xe0
create_or_delete_trace_kprobe+0x2c/0x80
trace_parse_run_command+0xf0/0x210
probes_write+0x20/0x40
vfs_write+0xfc/0x450
ksys_write+0x84/0x140
system_call_exception+0x17c/0x3a0
system_call_vectored_common+0xe8/0x278
--- interrupt: 3000 at 0x7fffa5682de0
NIP: 00007fffa5682de0 LR: 0000000000000000 CTR: 0000000000000000
REGS: c000000034847e80 TRAP: 3000 Not tainted (6.0.0-rc3-00007-gdcf8e5633e2e)
MSR: 900000000280f033 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 44002408 XER: 00000000
The address being probed has some special:
cmdline_proc_show: Probe based on ftrace
cmdline_proc_show+16: Probe for the next instruction at the ftrace location
The ftrace-based kprobe does not generate kprobe::ainsn::insn, it gets
set to NULL. In arch_prepare_kprobe() it will check for:
...
prev = get_kprobe(p->addr - 1);
preempt_enable_no_resched();
if (prev && ppc_inst_prefixed(ppc_inst_read(prev->ainsn.insn))) {
...
If prev is based on ftrace, 'ppc_inst_read(prev->ainsn.insn)' will occur
with a null pointer reference. At this point prev->addr will not be a
prefixed instruction, so the check can be skipped.
Check if prev is ftrace-based kprobe before reading 'prev->ainsn.insn'
to fix this problem.
Fixes: b4657f7650 ("powerpc/kprobes: Don't allow breakpoints on suffixes")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
[mpe: Trim oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220923093253.177298-1-lihuafei1@huawei.com
At boot time, it is not necessary to delay between polls of
cpu_callin_map when waiting for a kicked CPU to come up. Remove the
delay intervals, but preserve the overall deadline (five seconds).
At run time, the first poll result is usually negative and we incur a
sleeping wait. If we spin on the callin word for a short time first,
we can reduce __cpu_up() from dozens of milliseconds to under 1ms in
the common case on a P9 LPAR:
$ ppc64_cpu --smt=off
$ bpftrace -e 'kprobe:__cpu_up {
@start[tid] = nsecs;
}
kretprobe:__cpu_up /@start[tid]/ {
@us = hist((nsecs - @start[tid]) / 1000);
delete(@start[tid]);
}' -c 'ppc64_cpu --smt=on'
Before:
@us:
[16K, 32K) 85 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[32K, 64K) 13 |@@@@@@@ |
After:
@us:
[128, 256) 95 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[256, 512) 3 |@ |
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926220250.157022-1-nathanl@linux.ibm.com
The error injection facility on pseries VMs allows corruption of
arbitrary guest memory, potentially enabling a sufficiently privileged
user to disable lockdown or perform other modifications of the running
kernel via the rtas syscall.
Block the PAPR error injection facility from being opened or called
when locked down.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM)
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926131643.146502-3-nathanl@linux.ibm.com
Ensure r13 is zero from very early in boot until it gets set to the
boot paca pointer. This allows early program and mce handlers to halt
if there is no valid paca, rather than potentially run off into the
weeds. This preserves register and memory contents for low level
debugging tools.
Nothing could be printed to console at this point in any case because
even udbg is only set up after the boot paca is set, so this shouldn't
be missed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926055620.2676869-6-npiggin@gmail.com
The idea is to get to the point where if r13 is non-zero, then it should
contain a reasonable paca. This can be used in early boot program check
and machine check handlers to avoid running off into the weeds if they
hit before r13 has a paca.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926055620.2676869-5-npiggin@gmail.com
relocate() uses r13 in early boot before it is used for the paca. Use
a different register for this so r13 is kept unchanged until it is
set to the paca pointer.
Avoid r14 as well while we're here, there's no reason not to use the
volatile registers which is a bit less surprising, and r14 could be used
as another fixed reg one day.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926055620.2676869-4-npiggin@gmail.com
Use the early boot interrupt fixup in the machine check handler to allow
the machine check handler to run before interrupt endian is set up.
Branch to an early boot handler that just does a basic crash, which
allows it to run before ppc_md is set up. MSR[ME] is enabled on the boot
CPU earlier, and the machine check stack is temporarily set to the
middle of the init task stack.
This allows machine checks (e.g., due to invalid data access in real
mode) to print something useful earlier in boot (as soon as udbg is set
up, if CONFIG_PPC_EARLY_DEBUG=y).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926055620.2676869-3-npiggin@gmail.com
In preparation for using this sequence in machine check interrupt, move
it into a macro, with a small change to make it position independent.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926055620.2676869-2-npiggin@gmail.com
The interrupt entry code carefully saves a minimal number of registers,
so in some places the TOC is required, it is loaded into a different
register, so provide a macro that can supply an alternate TOC register.
This continues to use got addressing because TOC-relative results in
"got/toc optimization is not supported" messages by the linker. Having
r2 be one of the saved registers and using that for TOC addressing may
be the best way to avoid that and switch this to TOC addressing.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926034057.2360083-6-npiggin@gmail.com
A later change stops the kernel using r2 and loads it with a poison
value. Provide a PACATOC loading abstraction which can hide this
detail.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926034057.2360083-5-npiggin@gmail.com
Use helper macros to access global variables, and place them in .data
sections rather than in .toc. Putting addresses in TOC is not required
because the kernel is linked with a single TOC.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926034057.2360083-3-npiggin@gmail.com
Using a 32-bit constant for this marker allows it to be loaded with
two ALU instructions, like 32-bit. This avoids a TOC entry and a
TOC load that depends on the r2 value that has just been loaded from
the PACA.
This changes the value for 32-bit as well, so both have the same
value in the low 4 bytes and 64-bit has 0 in the top bytes.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926034057.2360083-2-npiggin@gmail.com
irq replay is quite complicated because of softirq processing which
itself enables and disables irqs. Several considerations need to be
accounted for due to this, and they are not clearly documented.
Refactor the irq replay code a bit to tidy and deduplicate some common
functions. Add comments, debug checks.
This has a minor functional change that irq tracing enable/disable is
done after each interrupt replayed, rather than after a batch. It also
re-sets state to IRQS_ALL_DISABLED after an interrupt, which doesn't
matter much because interrupts are hard disabled at this point, but it
is more consistent with how interrupt handlers are called.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926054305.2671436-8-npiggin@gmail.com
Prior changes eliminated cases of masked PACA_IRQ_MUST_HARD_MASK
interrupts that re-fire due to MSR[EE] being enabled while they are
pending. Add a debug check in the masked interrupt handler to catch
if this occurs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926054305.2671436-6-npiggin@gmail.com
If a synchronous interrupt (e.g., hash fault) is taken inside an
irqs-disabled region which has MSR[EE]=1, then an asynchronous interrupt
that is PACA_IRQ_MUST_HARD_MASK (e.g., PMI) is taken inside the
synchronous interrupt handler, then the synchronous interrupt will
return with MSR[EE]=1 and the asynchronous interrupt fires again.
If the asynchronous interrupt is a PMI and the original context does not
have PMIs disabled (only Linux IRQs), the asynchronous interrupt will
fire despite having the PMI marked soft pending. This can confuse the
perf code and cause warnings.
This patch changes the interrupt return so that irqs-disabled MSR[EE]=1
contexts will be returned to with MSR[EE]=0 if a PACA_IRQ_MUST_HARD_MASK
interrupt has become pending in the meantime.
The longer explanation for what happens:
1. local_irq_disable()
2. Hash fault interrupt fires, do_hash_fault handler runs
3. interrupt_enter_prepare() sets IRQS_ALL_DISABLED
4. interrupt_enter_prepare() sets MSR[EE]=1
5. PMU interrupt fires, masked handler runs
6. Masked handler marks PMI pending
7. Masked handler returns with PACA_IRQ_HARD_DIS set, MSR[EE]=0
8. do_hash_fault interrupt return handler runs
9. interrupt_exit_kernel_prepare() clears PACA_IRQ_HARD_DIS
10. interrupt returns with MSR[EE]=1
11. PMU interrupt fires, perf handler runs
Fixes: 4423eb5ae3 ("powerpc/64/interrupt: make normal synchronous interrupts enable MSR[EE] if possible")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926054305.2671436-4-npiggin@gmail.com
This prevents interrupts in early boot (e.g., program check) from
enabling MSR[EE], potentially causing endian mismatch or other
crashes when reporting early boot traps.
Fixes: 4423eb5ae3 ("powerpc/64/interrupt: make normal synchronous interrupts enable MSR[EE] if possible")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926054305.2671436-3-npiggin@gmail.com
The wait instruction encoding changed between ISA v2.07 and ISA v3.0.
In v3.1 the instruction gained a new field.
Update the PPC_WAIT macro to the current encoding. Rename the older
incompatible one with a _v203 suffix as it was introduced in v2.03
(the WC field was introduced in v2.07 but the kernel only uses WC=0).
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220920122259.363092-1-npiggin@gmail.com
Setting DEC to maximum at the start of the timer interrupt is not
necessary and can be avoided for performance when MSR[EE] is not
enabled during the handler as explained in commit 0faf20a1ad
("powerpc/64s/interrupt: Don't enable MSR[EE] in irq handlers unless
perf is in use"), where this change was first attempted.
The idea is that the timer interrupt runs with MSR[EE]=0, and at the end
of the interrupt DEC is programmed to the next timer interval, so there
is no need to clear the decrementer exception before then.
When the above commit was merged, that was not quite true. The low res
timer subsystem had some cases in the oneshot timer code where if the
tick was to be stopped and no timers active, the clock device would not
get the ->set_state_oneshot_stopped() call, so DEC would not get
reprogrammed, and this would hang taking continual timer interrupts.
So this was reverted in commit d2b9be1f4a ("powerpc/time: Always set
decrementer in timer_interrupt()"), which was a partial revert of the
above commit.
Commit 62c1256d54 ("timers/nohz: Switch to ONESHOT_STOPPED in the
low-res handler when the tick is stopped") was later merged to fix this
missing case in the timer subsystem, so now the behaviour can be
restored.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220909142457.278032-1-npiggin@gmail.com
Currently powerpc early debugging contains lot of platform specific
options, but does not support standard UART / serial 16550 console.
Later legacy_serial.c code supports registering UART as early debug console
from device tree but it is not early during booting, but rather later after
machine description code finishes.
So for real early debugging via UART is current code unsuitable.
Add support for new early debugging option CONFIG_PPC_EARLY_DEBUG_16550
which enable Serial 16550 console on address defined by new option
CONFIG_PPC_EARLY_DEBUG_16550_PHYSADDR and by stride by option
CONFIG_PPC_EARLY_DEBUG_16550_STRIDE.
With this change it is possible to debug powerpc machine descriptor code.
For example this early debugging code can print on serial console also
"No suitable machine description found" error which is done before
legacy_serial.c code.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220822231501.16827-1-pali@kernel.org
Implement syscall wrapper as per s390, x86, arm64. When enabled
cause handlers to accept parameters from a stack frame rather than
from user scratch register state. This allows for user registers to be
safely cleared in order to reduce caller influence on speculation
within syscall routine. The wrapper is a macro that emits syscall
handler symbols that call into the target handler, obtaining its
parameters from a struct pt_regs on the stack.
As registers are already saved to the stack prior to calling
system_call_exception, it appears that this function is executed more
efficiently with the new stack-pointer convention than with parameters
passed by registers, avoiding the allocation of a stack frame for this
method. On a 32-bit system, we see >20% performance increases on the
null_syscall microbenchmark, and on a Power 8 the performance gains
amortise the cost of clearing and restoring registers which is
implemented at the end of this series, seeing final result of ~5.6%
performance improvement on null_syscall.
Syscalls are wrapped in this fashion on all platforms except for the
Cell processor as this commit does not provide SPU support. This can be
quickly fixed in a successive patch, but requires spu_sys_callback to
allocate a pt_regs structure to satisfy the wrapped calling convention.
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmai.com>
[mpe: Make incompatible with COMPAT to retain clearing of high bits of args]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-22-rmclure@linux.ibm.com
Change system_call_exception arguments to pass a pointer to a stack
frame container caller state, as well as the original r0, which
determines the number of the syscall. This has been observed to yield
improved performance to passing them by registers, circumventing the
need to allocate a stack frame.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Retain clearing of high bits of args for compat tasks]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-21-rmclure@linux.ibm.com
Cause syscall handlers to be typed as follows when called indirectly
throughout the kernel. This is to allow for better type checking.
typedef long (*syscall_fn)(unsigned long, unsigned long, unsigned long,
unsigned long, unsigned long, unsigned long);
Since both 32 and 64-bit abis allow for at least the first six
machine-word length parameters to a function to be passed by registers,
even handlers which admit fewer than six parameters may be viewed as
having the above type.
Coercing syscalls to syscall_fn requires a cast to void* to avoid
-Wcast-function-type.
Fixup comparisons in VDSO to avoid pointer-integer comparison. Introduce
explicit cast on systems with SPUs.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-19-rmclure@linux.ibm.com
The table of syscall handlers and registered compatibility syscall
handlers has in past been produced using assembly, with function
references resolved at link time. This moves link-time errors to
compile-time, by rewriting systbl.S in C, and including the
linux/syscalls.h, linux/compat.h and asm/syscalls.h headers for
prototypes.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-18-rmclure@linux.ibm.com
Forward declare all syscall handler prototypes where a generic prototype
is not provided in either linux/syscalls.h or linux/compat.h in
asm/syscalls.h. This is required for compile-time type-checking for
syscall handlers, which is implemented later in this series.
32-bit compatibility syscall handlers are expressed in terms of types in
ppc32.h. Expose this header globally.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use standard include guard naming for syscalls_32.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-17-rmclure@linux.ibm.com
Arch-specific implementations of syscall handlers are currently used
over generic implementations for the following reasons:
1. Semantics unique to powerpc
2. Compatibility syscalls require 'argument padding' to comply with
64-bit argument convention in ELF32 abi.
3. Parameter types or order is different in other architectures.
These syscall handlers have been defined prior to this patch series
without invoking the SYSCALL_DEFINE or COMPAT_SYSCALL_DEFINE macros with
custom input and output types. We remove every such direct definition in
favour of the aforementioned macros.
Also update syscalls.tbl in order to refer to the symbol names generated
by each of these macros. Since ppc64_personality can be called by both
64 bit and 32 bit binaries through compatibility, we must generate both
both compat_sys_ and sys_ symbols for this handler.
As an aside:
A number of architectures including arm and powerpc agree on an
alternative argument order and numbering for most of these arch-specific
handlers. A future patch series may allow for asm/unistd.h to signal
through its defines that a generic implementation of these syscall
handlers with the correct calling convention be emitted, through the
__ARCH_WANT_COMPAT_SYS_... convention.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-16-rmclure@linux.ibm.com
Avoid duplication in future patch that will define the ppc64_personality
syscall handler in terms of the SYSCALL_DEFINE and COMPAT_SYSCALL_DEFINE
macros, by extracting the common body of ppc64_personality into a helper
function.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-15-rmclure@linux.ibm.com
Syscall handlers should not be invoked internally by their symbol names,
as these symbols defined by the architecture-defined SYSCALL_DEFINE
macro. Move the compatibility syscall definition for mmap2 to
syscalls.c, so that all mmap implementations can share a helper function.
Remove 'inline' on static mmap helper.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix compat_sys_mmap2() prototype and offset handling]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-14-rmclure@linux.ibm.com
Syscall handlers should not be invoked internally by their symbol names,
as these symbols defined by the architecture-defined SYSCALL_DEFINE
macro. Fortunately, in the case of ppc64_personality, its call to
sys_personality can be replaced with an invocation to the
equivalent ksys_personality inline helper in <linux/syscalls.h>.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-13-rmclure@linux.ibm.com
Syscall #82 has been implemented for 32-bit platforms in a unique way on
powerpc systems. This hack will in effect guess whether the caller is
expecting new select semantics or old select semantics. It does so via a
guess, based off the first parameter. In new select, this parameter
represents the length of a user-memory array of file descriptors, and in
old select this is a pointer to an arguments structure.
The heuristic simply interprets sufficiently large values of its first
parameter as being a call to old select. The following is a discussion
on how this syscall should be handled.
As discussed in this thread, the existence of such a hack suggests that for
whatever powerpc binaries may predate glibc, it is most likely that they
would have taken use of the old select semantics. x86 and arm64 both
implement this syscall with oldselect semantics.
Remove the powerpc implementation, and update syscall.tbl to refer to emit
a reference to sys_old_select and compat_sys_old_select
for 32-bit binaries, in keeping with how other architectures support
syscall #82.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/13737de5-0eb7-e881-9af0-163b0d29a1a0@csgroup.eu/
Link: https://lore.kernel.org/r/20220921065605.1051927-12-rmclure@linux.ibm.com
The powerpc fallocate compat syscall handler is identical to the
generic implementation provided by commit 59c10c52f5 ("riscv:
compat: syscall: Add compat_sys_call_table implementation"), and as
such can be removed in favour of the generic implementation.
A future patch series will replace more architecture-defined syscall
handlers with generic implementations, dependent on introducing generic
implementations that are compatible with powerpc and arm's parameter
reorderings.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-11-rmclure@linux.ibm.com
As reported[1] by Arnd, the arch-specific fadvise64_64 and fallocate
compatibility handlers assume parameters are passed with 32-bit
big-endian ABI. This affects the assignment of odd-even parameter pairs
to the high or low words of a 64-bit syscall parameter.
Fix fadvise64_64 fallocate compat handlers to correctly swap upper/lower
32 bits conditioned on endianness.
A future patch will replace the arch-specific compat fallocate with an
asm-generic implementation. This patch is intended for ease of
back-port.
[1]: https://lore.kernel.org/all/be29926f-226e-48dc-871a-e29a54e80583@www.fastmail.com/
Fixes: 57f48b4b74 ("powerpc/compat_sys: swap hi/lo parts of 64-bit syscall args in LE mode")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-9-rmclure@linux.ibm.com
Interrupt handlers on 64s systems will often need to save register state
from the interrupted process to make space for loading special purpose
registers or for internal state.
Fix a comment documenting a common code path macro in the beginning of
interrupt handlers where r10 is saved to the PACA to afford space for
the value of the CFAR. Comment is currently written as if r10-r12 are
saved to PACA, but in fact only r10 is saved, with r11-r12 saved much
later. The distance in code between these saves has grown over the many
revisions of this macro. Fix this by signalling with a comment where
r11-r12 are saved to the PACA.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-8-rmclure@linux.ibm.com
The common interrupt handler prologue macro and the bad_stack
trampolines include consecutive sequences of register saves, and some
register clears. Neaten such instances by expanding use of the SAVE_GPRS
macro and employing the ZEROIZE_GPR macro when appropriate.
Also simplify an invocation of SAVE_GPRS targetting all non-volatile
registers to SAVE_NVGPRS.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-7-rmclure@linux.ibm.com
Restoring the register state of the interrupted thread involves issuing
a large number of predictable loads to the kernel stack frame. Issue the
REST_GPR{,S} macros to clearly signal when this is happening, and bunch
together restores at the end of the interrupt handler where the saved
value is not consumed earlier in the handler code.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-6-rmclure@linux.ibm.com
Use the convenience macros for saving/clearing/restoring gprs in keeping
with syscall calling conventions. The plural variants of these macros
can store a range of registers for concision.
This works well when the user gpr value we are hoping to save is still
live. In the syscall interrupt handlers, user register state is
sometimes juggled between registers. Hold-off from issuing the SAVE_GPR
macro for applicable neighbouring lines to highlight the delicate
register save logic.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-5-rmclure@linux.ibm.com
This reverts commit 8875f47b76 ("powerpc/syscall: Save r3 in regs->orig_r3
").
Save caller's original r3 state to the kernel stackframe before entering
system_call_exception. This allows for user registers to be cleared by
the time system_call_exception is entered, reducing the influence of
user registers on speculation within the kernel.
Prior to this commit, orig_r3 was saved at the beginning of
system_call_exception. Instead, save orig_r3 while the user value is
still live in r3.
Also replicate this early save in 32-bit. A similar save was removed in
commit 6f76a01173 ("powerpc/syscall: implement system call entry/exit
logic in C for PPC32") when 32-bit adopted system_call_exception. Revert
its removal of orig_r3 saves.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-3-rmclure@linux.ibm.com
The asmlinkage macro has no special meaning in powerpc, and prior to
this patch is used sporadically on some syscall handler definitions. On
architectures that do not define asmlinkage, it resolves to extern "C"
for C++ compilers and a nop otherwise. The current invocations of
asmlinkage provide far from complete support for C++ toolchains, and so
the macro serves no purpose in powerpc.
Remove all invocations of asmlinkage in arch/powerpc. These incidentally
only occur in syscall definitions and prototypes.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-2-rmclure@linux.ibm.com
e500 idle setup is a bit messy.
e500_idle() is used for PPC32 while book3e_idle() is used for PPC64.
As they are mutually exclusive, call them all e500_idle().
Use CONFIG_MPC_85xx instead of PPC32 + E500 in Makefile and rename
idle_e500.c to idle_85xx.c .
Rename idle_book3e.c to idle_64e.c and remove #ifdef PPC64 in
as it's only built on PPC64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8039301334e948974c85ec5ef2db37751075185b.1663606876.git.christophe.leroy@csgroup.eu
PPC_85xx is PPC32 only.
PPC_85xx always selects E500 and is the only PPC32 that
selects E500.
FSL_BOOKE is selected when E500 and PPC32 are selected.
So FSL_BOOKE is redundant with PPC_85xx.
Remove FSL_BOOKE.
And rename four files accordingly.
cpu_setup_fsl_booke.S is not renamed because it is linked to
PPC_FSL_BOOK3E and not to FSL_BOOKE as suggested by its name.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/08e3e15594e66d63b9e89c5b4f9c35153913c28f.1663606875.git.christophe.leroy@csgroup.eu
cpu_specs[] is full of #ifdefs depending on the different
types of CPU.
CPUs are mutually exclusive, it is therefore possible to split
cpu_specs[] into smaller more readable pieces.
Create cpu_specs_XXX.h that will each be dedicated on one
of the following mutually exclusive families:
- 40x
- 44x
- 47x
- 8xx
- e500
- book3s/32
- book3s/64
In book3s/32, the block for 603 has been moved in front in order
to not have two 604 blocks.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix CONFIG_47x to be CONFIG_PPC_47x, tweak some formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a44b865e0318286155273b10cdf524ab697928c1.1663606875.git.christophe.leroy@csgroup.eu
The only 64-bit Book3E CPUs we support require the selection
of CONFIG_PPC_E500MC.
However our Kconfig allows configurating a kernel that has 64-bit
Book3E support, but without CONFIG_PPC_E500MC enabled. Such a kernel
would never boot, it doesn't know about any CPUs.
To fix this, force CONFIG_PPC_E500MC to be selected whenever we are
building a 64-bit Book3E kernel.
And add a test to detect future situations where cpu_specs is empty.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ae5d8b8b3ccc346e61d2ec729767f92766273f0b.1663606875.git.christophe.leroy@csgroup.eu
The original microwatt submission[1] included some early debug code for
using the Microwatt "potato" UART.
The series that was eventually merged switched to using a standard UART,
and so doesn't need any special early debug handling. But some of the
original code was merged accidentally under the non-existent
CONFIG_PPC_EARLY_DEBUG_MICROWATT.
Drop the unused code.
1: https://lore.kernel.org/linuxppc-dev/20200509050340.GD1464954@thinks.paulus.ozlabs.org/
Fixes: 48b545b801 ("powerpc/microwatt: Use standard 16550 UART for console")
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220919052755.800907-1-mpe@ellerman.id.au
In interrupt_64.S, formerly entry_64.S, there are two toc entries
created for sys_call_table and compat_sys_call_table.
These are no longer used, since the system call entry was converted from
asm to C, so remove them.
Fixes: 68b34588e2 ("powerpc/64/sycall: Implement syscall entry/exit logic in C")
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220913124545.2817825-1-mpe@ellerman.id.au
Const function pointers by convention live in .data.rel.ro if they need
to be relocated. Now that .data.rel.ro is linked into the read-only
region, put them in the right section. This doesn't make much practical
difference, but it will make the C conversion of sys_call_table a
smaller change as far as linking goes.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916040755.2398112-8-npiggin@gmail.com
Follow the binutils ld internal linker script and merge .got and .toc
input sections in the .got output section.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916040755.2398112-7-npiggin@gmail.com
.sdata2 is a readonly small data section for ppc32, and .data.rel.ro
is data that needs relocating but is read-only after that so these
can both be moved to the read only memory region.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916040755.2398112-5-npiggin@gmail.com
This moves linker-related tables from .data to read-only area.
Relocations are performed at early boot time before memory is protected,
after which there should be no modifications required.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Don't use SPECIAL as reported by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916040755.2398112-4-npiggin@gmail.com
Following the example from the binutils default linker script, move
.got1 and .got2 out of .text, to just after RO_DATA.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916040755.2398112-3-npiggin@gmail.com
powerpc has a number of read-only sections and tables that are put after
RO_DATA(). Move the __end_rodata symbol to cover these as well.
Setting memory to read-only at boot is done using __init_begin, change
that to use __end_rodata.
This makes is_kernel_rodata() exactly cover the read-only region, as
well as other things using __end_rodata (e.g., kernel/dma/debug.c).
Boot dmesg also prints the rodata size more accurately.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916040755.2398112-2-npiggin@gmail.com
Currently __init_begin is used as the boundary for strict RWX between
executable/read-only text and data, and non-executable (after boot) code
and data.
But that's a little subtle, so add an explicit symbol to document that
the SRWX boundary lies there, and add a comment making it clear that
__init_begin must also begin there.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916131422.318752-2-mpe@ellerman.id.au
Add a check that STRICT_ALIGN_SIZE is aligned to at least PAGE_SIZE.
That then makes the alignment to PAGE_SIZE immediately after the
alignment to STRICT_ALIGN_SIZE redundant, so remove it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916131422.318752-1-mpe@ellerman.id.au
Commit 24d33ac5b8 ("powerpc/64s: Make prom_init require RELOCATABLE")
made prom_init depend on CONFIG_RELOCATABLE.
But it missed cleaning up a case in the linker script for RELOCATABLE=n,
and associated symbols. Remove them now.
Fixes: 24d33ac5b8 ("powerpc/64s: Make prom_init require RELOCATABLE")
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220920131157.1032707-1-mpe@ellerman.id.au
generic_secondary_common_init() calls LOAD_REG_ADDR(r7, nr_cpu_ids)
conditionally on CONFIG_SMP. However, if 'NR_CPUS == 1', kernel doesn't
use the nr_cpu_ids, and in C code, it's just:
#if NR_CPUS == 1
#define nr_cpu_ids
...
This series makes declaration of nr_cpu_ids conditional on NR_CPUS == 1,
and that reveals the issue, because compiler can't link the
LOAD_REG_ADDR(r7, nr_cpu_ids) against nonexisting symbol.
Current code looks unsafe for those who build kernel with CONFIG_SMP=y and
NR_CPUS == 1. This is weird configuration, but not disallowed.
Fix the linker error by replacing LOAD_REG_ADDR() with LOAD_REG_IMMEDIATE()
conditionally on NR_CPUS == 1.
As the following patch adds CONFIG_FORCE_NR_CPUS option that has the
similar effect on nr_cpu_ids, make the generic_secondary_common_init()
conditional on it too.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
At the time this was submitted by Leonardo, I confirmed -- or thought
I had confirmed -- with PowerVM partition firmware development that
the following RTAS functions:
- ibm,get-xive
- ibm,int-off
- ibm,int-on
- ibm,set-xive
were safe to call on multiple CPUs simultaneously, not only with
respect to themselves as indicated by PAPR, but with arbitrary other
RTAS calls:
https://lore.kernel.org/linuxppc-dev/875zcy2v8o.fsf@linux.ibm.com/
Recent discussion with firmware development makes it clear that this
is not true, and that the code in commit b664db8e3f ("powerpc/rtas:
Implement reentrant rtas call") is unsafe, likely explaining several
strange bugs we've seen in internal testing involving DLPAR and
LPM. These scenarios use ibm,configure-connector, whose internal state
can be corrupted by the concurrent use of the "reentrant" functions,
leading to symptoms like endless busy statuses from RTAS.
Fixes: b664db8e3f ("powerpc/rtas: Implement reentrant rtas call")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220907220111.223267-1-nathanl@linux.ibm.com
Just one fixup patch, reworking the softirq_on_own_stack logic for
preempt-rt kernels as discussed in
https://lore.kernel.org/all/CAHk-=wgZSD3W2y6yczad2Am=EfHYyiPzTn3CfXxrriJf9i5W5w@mail.gmail.com/
-----BEGIN PGP SIGNATURE-----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=0A1T
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull SOFTIRQ_ON_OWN_STACK rework from Arnd Bergmann:
"Just one fixup patch, reworking the softirq_on_own_stack logic for
preempt-rt kernels as discussed in
https://lore.kernel.org/all/CAHk-=wgZSD3W2y6yczad2Am=EfHYyiPzTn3CfXxrriJf9i5W5w@mail.gmail.com/"
* tag 'asm-generic-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: Conditionally enable do_softirq_own_stack() via Kconfig.
When building with W=1 you get:
arch/powerpc/math-emu/fre.c:6:5: error: no previous prototype for 'fre' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fsqrt.c:11:1: error: no previous prototype for 'fsqrt' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fsqrts.c:12:1: error: no previous prototype for 'fsqrts' [-Werror=missing-prototypes]
arch/powerpc/math-emu/frsqrtes.c:6:5: error: no previous prototype for 'frsqrtes' [-Werror=missing-prototypes]
arch/powerpc/math-emu/mtfsf.c:10:1: error: no previous prototype for 'mtfsf' [-Werror=missing-prototypes]
arch/powerpc/math-emu/mtfsfi.c:10:1: error: no previous prototype for 'mtfsfi' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fabs.c:7:1: error: no previous prototype for 'fabs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fadd.c:11:1: error: no previous prototype for 'fadd' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fadds.c:12:1: error: no previous prototype for 'fadds' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fcmpo.c:11:1: error: no previous prototype for 'fcmpo' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fcmpu.c:11:1: error: no previous prototype for 'fcmpu' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fcmpu.c:14:19: error: variable 'B_c' set but not used [-Werror=unused-but-set-variable]
arch/powerpc/math-emu/fcmpu.c:13:19: error: variable 'A_c' set but not used [-Werror=unused-but-set-variable]
arch/powerpc/math-emu/fctiw.c:11:1: error: no previous prototype for 'fctiw' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fctiwz.c:11:1: error: no previous prototype for 'fctiwz' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fdiv.c:11:1: error: no previous prototype for 'fdiv' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fdivs.c:12:1: error: no previous prototype for 'fdivs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fmadd.c:11:1: error: no previous prototype for 'fmadd' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fmadds.c:12:1: error: no previous prototype for 'fmadds' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fmsub.c:11:1: error: no previous prototype for 'fmsub' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fmsubs.c:12:1: error: no previous prototype for 'fmsubs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fmul.c:11:1: error: no previous prototype for 'fmul' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fmuls.c:12:1: error: no previous prototype for 'fmuls' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fnabs.c:7:1: error: no previous prototype for 'fnabs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fneg.c:7:1: error: no previous prototype for 'fneg' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fnmadd.c:11:1: error: no previous prototype for 'fnmadd' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fnmadds.c:12:1: error: no previous prototype for 'fnmadds' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fnmsub.c:11:1: error: no previous prototype for 'fnmsub' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fnmsubs.c:12:1: error: no previous prototype for 'fnmsubs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fres.c:7:1: error: no previous prototype for 'fres' [-Werror=missing-prototypes]
arch/powerpc/math-emu/frsp.c:12:1: error: no previous prototype for 'frsp' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fsel.c:11:1: error: no previous prototype for 'fsel' [-Werror=missing-prototypes]
arch/powerpc/math-emu/lfs.c:12:1: error: no previous prototype for 'lfs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/frsqrte.c:7:1: error: no previous prototype for 'frsqrte' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fsub.c:11:1: error: no previous prototype for 'fsub' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fsubs.c:12:1: error: no previous prototype for 'fsubs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/mcrfs.c:10:1: error: no previous prototype for 'mcrfs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/mffs.c:10:1: error: no previous prototype for 'mffs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/mtfsb0.c:10:1: error: no previous prototype for 'mtfsb0' [-Werror=missing-prototypes]
arch/powerpc/math-emu/mtfsb1.c:10:1: error: no previous prototype for 'mtfsb1' [-Werror=missing-prototypes]
arch/powerpc/math-emu/stfiwx.c:7:1: error: no previous prototype for 'stfiwx' [-Werror=missing-prototypes]
arch/powerpc/math-emu/stfs.c:12:1: error: no previous prototype for 'stfs' [-Werror=missing-prototypes]
arch/powerpc/math-emu/fmr.c:7:1: error: no previous prototype for 'fmr' [-Werror=missing-prototypes]
arch/powerpc/math-emu/lfd.c:10:1: error: no previous prototype for 'lfd' [-Werror=missing-prototypes]
arch/powerpc/math-emu/stfd.c:7:1: error: no previous prototype for 'stfd' [-Werror=missing-prototypes]
arch/powerpc/math-emu/math_efp.c:177:5: error: no previous prototype for 'do_spe_mathemu' [-Werror=missing-prototypes]
arch/powerpc/math-emu/math_efp.c:726:5: error: no previous prototype for 'speround_handler' [-Werror=missing-prototypes]
arch/powerpc/math-emu/math_efp.c:893:12: error: no previous prototype for 'spe_mathemu_init' [-Werror=missing-prototypes]
Fix the warnings in math_efp.c by adding prototypes of do_spe_mathemu()
and speround_handler() to asm/processor.h and declare spe_mathemu_init()
static.
The other warnings are benign and not worth the churn of fixing them,
expecially the 'unused-but-set-variable' which would impact the core
part of 'math-emu'.
So silence them by adding -Wno-missing-prototypes -Wno-unused-but-set-variable.
But then you get:
arch/powerpc/math-emu/fre.c:6:5: error: no previous declaration for 'fre' [-Werror=missing-declarations]
arch/powerpc/math-emu/fsqrt.c:11:1: error: no previous declaration for 'fsqrt' [-Werror=missing-declarations]
arch/powerpc/math-emu/fsqrts.c:12:1: error: no previous declaration for 'fsqrts' [-Werror=missing-declarations]
arch/powerpc/math-emu/frsqrtes.c:6:5: error: no previous declaration for 'frsqrtes' [-Werror=missing-declarations]
arch/powerpc/math-emu/mtfsf.c:10:1: error: no previous declaration for 'mtfsf' [-Werror=missing-declarations]
arch/powerpc/math-emu/mtfsfi.c:10:1: error: no previous declaration for 'mtfsfi' [-Werror=missing-declarations]
arch/powerpc/math-emu/fabs.c:7:1: error: no previous declaration for 'fabs' [-Werror=missing-declarations]
arch/powerpc/math-emu/fadd.c:11:1: error: no previous declaration for 'fadd' [-Werror=missing-declarations]
arch/powerpc/math-emu/fadds.c:12:1: error: no previous declaration for 'fadds' [-Werror=missing-declarations]
arch/powerpc/math-emu/fcmpo.c:11:1: error: no previous declaration for 'fcmpo' [-Werror=missing-declarations]
arch/powerpc/math-emu/fcmpu.c:11:1: error: no previous declaration for 'fcmpu' [-Werror=missing-declarations]
arch/powerpc/math-emu/fctiw.c:11:1: error: no previous declaration for 'fctiw' [-Werror=missing-declarations]
arch/powerpc/math-emu/fctiwz.c:11:1: error: no previous declaration for 'fctiwz' [-Werror=missing-declarations]
arch/powerpc/math-emu/fdiv.c:11:1: error: no previous declaration for 'fdiv' [-Werror=missing-declarations]
arch/powerpc/math-emu/fdivs.c:12:1: error: no previous declaration for 'fdivs' [-Werror=missing-declarations]
arch/powerpc/math-emu/fmadd.c:11:1: error: no previous declaration for 'fmadd' [-Werror=missing-declarations]
arch/powerpc/math-emu/fmadds.c:12:1: error: no previous declaration for 'fmadds' [-Werror=missing-declarations]
arch/powerpc/math-emu/fmsub.c:11:1: error: no previous declaration for 'fmsub' [-Werror=missing-declarations]
arch/powerpc/math-emu/fmsubs.c:12:1: error: no previous declaration for 'fmsubs' [-Werror=missing-declarations]
arch/powerpc/math-emu/fmul.c:11:1: error: no previous declaration for 'fmul' [-Werror=missing-declarations]
arch/powerpc/math-emu/fmuls.c:12:1: error: no previous declaration for 'fmuls' [-Werror=missing-declarations]
arch/powerpc/math-emu/fnabs.c:7:1: error: no previous declaration for 'fnabs' [-Werror=missing-declarations]
arch/powerpc/math-emu/fneg.c:7:1: error: no previous declaration for 'fneg' [-Werror=missing-declarations]
arch/powerpc/math-emu/fnmadd.c:11:1: error: no previous declaration for 'fnmadd' [-Werror=missing-declarations]
arch/powerpc/math-emu/fnmadds.c:12:1: error: no previous declaration for 'fnmadds' [-Werror=missing-declarations]
arch/powerpc/math-emu/fnmsub.c:11:1: error: no previous declaration for 'fnmsub' [-Werror=missing-declarations]
arch/powerpc/math-emu/fnmsubs.c:12:1: error: no previous declaration for 'fnmsubs' [-Werror=missing-declarations]
arch/powerpc/math-emu/fres.c:7:1: error: no previous declaration for 'fres' [-Werror=missing-declarations]
arch/powerpc/math-emu/frsp.c:12:1: error: no previous declaration for 'frsp' [-Werror=missing-declarations]
arch/powerpc/math-emu/fsel.c:11:1: error: no previous declaration for 'fsel' [-Werror=missing-declarations]
arch/powerpc/math-emu/lfs.c:12:1: error: no previous declaration for 'lfs' [-Werror=missing-declarations]
arch/powerpc/math-emu/frsqrte.c:7:1: error: no previous declaration for 'frsqrte' [-Werror=missing-declarations]
arch/powerpc/math-emu/fsub.c:11:1: error: no previous declaration for 'fsub' [-Werror=missing-declarations]
arch/powerpc/math-emu/fsubs.c:12:1: error: no previous declaration for 'fsubs' [-Werror=missing-declarations]
arch/powerpc/math-emu/mcrfs.c:10:1: error: no previous declaration for 'mcrfs' [-Werror=missing-declarations]
arch/powerpc/math-emu/mffs.c:10:1: error: no previous declaration for 'mffs' [-Werror=missing-declarations]
arch/powerpc/math-emu/mtfsb0.c:10:1: error: no previous declaration for 'mtfsb0' [-Werror=missing-declarations]
arch/powerpc/math-emu/mtfsb1.c:10:1: error: no previous declaration for 'mtfsb1' [-Werror=missing-declarations]
arch/powerpc/math-emu/stfiwx.c:7:1: error: no previous declaration for 'stfiwx' [-Werror=missing-declarations]
arch/powerpc/math-emu/stfs.c:12:1: error: no previous declaration for 'stfs' [-Werror=missing-declarations]
arch/powerpc/math-emu/fmr.c:7:1: error: no previous declaration for 'fmr' [-Werror=missing-declarations]
arch/powerpc/math-emu/lfd.c:10:1: error: no previous declaration for 'lfd' [-Werror=missing-declarations]
arch/powerpc/math-emu/stfd.c:7:1: error: no previous declaration for 'stfd' [-Werror=missing-declarations]
So also add -Wno-missing-declarations.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/688084b40b5ac88f2905cb207d5dad947d8d34dc.1662531153.git.christophe.leroy@csgroup.eu
Remove the CONFIG_PREEMPT_RT symbol from the ifdef around
do_softirq_own_stack() and move it to Kconfig instead.
Enable softirq stacks based on SOFTIRQ_ON_OWN_STACK which depends on
HAVE_SOFTIRQ_ON_OWN_STACK and its default value is set to !PREEMPT_RT.
This ensures that softirq stacks are not used on PREEMPT_RT and avoids
a 'select' statement on an option which has a 'depends' statement.
Link: https://lore.kernel.org/YvN5E%2FPrHfUhggr7@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In pcibios_alloc_controller(), 'phb' is allocated and escaped into
global 'hose_list'. So we should call of_node_get() when a new reference
created into 'phb->dn'. And when phb is freed, we should call
of_node_put() on it.
NOTE: This function is called in the iteration of for_each_xx in
chrp_find_bridges() and pSeries_discover_phbs(). If there is no
of_node_get(), the object may be prematurely freed.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220702022936.266146-1-windhl@126.com
In pci_add_device_node_info(), use of_node_put() to drop the reference
to 'parent' returned by of_get_parent() to keep refcount balance.
Fixes: cca87d303c ("powerpc/pci: Refactor pci_dn")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20220701131750.240170-1-windhl@126.com
In find_legacy_serial_ports(), of_find_node_by_path() will return a node
pointer with refcount incremented. The reference should be dropped with
of_node_put() when it is not used anymore.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220619070811.4067215-1-windhl@126.com
With recent binutils, the following warning appears:
VDSO32L arch/powerpc/kernel/vdso/vdso32.so.dbg
/opt/gcc-12.2.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/12.2.0/../../../../powerpc64-linux/bin/ld: warning: arch/powerpc/kernel/vdso/getcpu-32.o: missing .note.GNU-stack section implies executable stack
/opt/gcc-12.2.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/12.2.0/../../../../powerpc64-linux/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
To avoid that, explicitly tell the linker we don't want executable
stack.
For more explanations, see commit ffcf9c5700 ("x86: link vdso
and boot with -z noexecstack --no-warn-rwx-segments")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b95f2e3216a574837dd61208444e9515c3423da4.1662132312.git.christophe.leroy@csgroup.eu
dtl is the PAPR Dispatch Trace Log, which is entirely a pseries feature.
The pseries platform alrady has a file dealing with the dtl, so move
scanning for stolen time accounting there from kernel/time.c.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220902085316.2071519-5-npiggin@gmail.com
Internal data structures (cpu_bps, task_bps) of powerpc's hw_breakpoint
implementation have relied on nr_bp_mutex serializing access to them.
Before overhauling synchronization of kernel/events/hw_breakpoint.c,
introduce 2 spinlocks to synchronize cpu_bps and task_bps respectively,
thus avoiding reliance on callers synchronizing powerpc's hw_breakpoint.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-10-elver@google.com
The definitions for the patch sites etc. don't belong in
asm-prototypes.h, they are not EXPORT'ed asm symbols.
Move them into sections.h which is traditionally used for asm symbols.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220818050659.187181-1-mpe@ellerman.id.au
The semi-recent changes to MSR handling when entering RTAS (firmware)
cause crashes on IBM Cell machines. An example trace:
kernel tried to execute user page (2fff01a8) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0x2fff01a8
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=4 NUMA Cell
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.0.0-rc2-00433-gede0a8d3307a #207
NIP: 000000002fff01a8 LR: 0000000000032608 CTR: 0000000000000000
REGS: c0000000015236b0 TRAP: 0400 Tainted: G W (6.0.0-rc2-00433-gede0a8d3307a)
MSR: 0000000008001002 <ME,RI> CR: 00000000 XER: 20000000
...
NIP 0x2fff01a8
LR 0x32608
Call Trace:
0xc00000000143c5f8 (unreliable)
.rtas_call+0x224/0x320
.rtas_get_boot_time+0x70/0x150
.read_persistent_clock64+0x114/0x140
.read_persistent_wall_and_boot_offset+0x24/0x80
.timekeeping_init+0x40/0x29c
.start_kernel+0x674/0x8f0
start_here_common+0x1c/0x50
Unlike PAPR platforms where RTAS is only used in guests, on the IBM Cell
machines Linux runs with MSR[HV] set but also uses RTAS, provided by
SLOF.
Fix it by copying the MSR[HV] bit from the MSR value we've just read
using mfmsr into the value used for RTAS.
It seems like we could also fix it using an #ifdef CELL to set MSR[HV],
but that doesn't work because it's possible to build a single kernel
image that runs on both Cell native and pseries.
Fixes: b6b1c3ce06 ("powerpc/rtas: Keep MSR[RI] set when calling RTAS")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Link: https://lore.kernel.org/r/20220823115952.1203106-2-mpe@ellerman.id.au
Christophe Leroy reported that commit 7b4537199a ("kbuild: link
symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS") broke
mpc85xx_defconfig + CONFIG_RELOCATABLE=y.
LD vmlinux
SYSMAP System.map
SORTTAB vmlinux
CHKREL vmlinux
WARNING: 451 bad relocations
c0b312a9 R_PPC_UADDR32 .head.text-0x3ff9ed54
c0b312ad R_PPC_UADDR32 .head.text-0x3ffac224
c0b312b1 R_PPC_UADDR32 .head.text-0x3ffb09f4
c0b312b5 R_PPC_UADDR32 .head.text-0x3fe184dc
c0b312b9 R_PPC_UADDR32 .head.text-0x3fe183a8
...
The compiler emits a bunch of R_PPC_UADDR32, which is not supported by
arch/powerpc/kernel/reloc_32.S.
The reason is there exists an unaligned symbol.
$ powerpc-linux-gnu-nm -n vmlinux
...
c0b31258 d spe_aligninfo
c0b31298 d __func__.0
c0b312a9 D sys_call_table
c0b319b8 d __func__.0
Commit 7b4537199a is not the root cause. Even before that, I can
reproduce the same issue for mpc85xx_defconfig + CONFIG_RELOCATABLE=y
+ CONFIG_MODVERSIONS=n.
It is just that nobody noticed because when CONFIG_MODVERSIONS is
enabled, a __crc_* symbol inserted before sys_call_table was hiding the
unalignment issue.
Adding alignment to the syscall table for ppc32 fixes the issue.
Cc: stable@vger.kernel.org
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Trim change log discussion, add Cc stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/38605f6a-a568-f884-f06f-ea4da5b214f0@csgroup.eu/
Link: https://lore.kernel.org/r/20220820165129.1147589-1-masahiroy@kernel.org
On 32-bit powerpc systems with more PCIe controllers and more PCI
domains, where on more PCI domains are same PCI numbers, when kernel is
compiled with CONFIG_PROC_FS=y and
CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT=y options, kernel prints
"proc_dir_entry 'pci/01' already registered" error message.
proc_dir_entry 'pci/01' already registered
WARNING: CPU: 0 PID: 1 at fs/proc/generic.c:377 proc_register+0x1a8/0x1ac
...
NIP proc_register+0x1a8/0x1ac
LR proc_register+0x1a8/0x1ac
Call Trace:
proc_register+0x1a8/0x1ac (unreliable)
_proc_mkdir+0x78/0xa4
pci_proc_attach_device+0x11c/0x168
pci_proc_init+0x80/0x98
do_one_initcall+0x80/0x284
kernel_init_freeable+0x1f4/0x2a0
kernel_init+0x24/0x150
ret_from_kernel_thread+0x5c/0x64
This regression started appearing after commit
5663568130 ("powerpc/pci: Add config option for using all 256 PCI
buses") in case in each mPCIe slot is connected PCIe card and therefore
PCI bus 1 is populated in for every PCIe controller / PCI domain.
The reason is that PCI procfs code expects that when PCI bus numbers are
not unique across all PCI domains, function pci_proc_domain() returns
true for domain dependent buses.
Fix this issue by setting PCI_ENABLE_PROC_DOMAINS and
PCI_COMPAT_DOMAIN_0 flags for 32-bit powerpc code when
CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT is enabled. Same approach is
already implemented for 64-bit powerpc code (where PCI bus numbers are
always domain dependent).
Fixes: 5663568130 ("powerpc/pci: Add config option for using all 256 PCI buses")
Signed-off-by: Pali Rohár <pali@kernel.org>
[mpe: Trim change log oops message]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220820115113.30581-1-pali@kernel.org
