Update addresses of PCIE link width registers,
& link width format used to populate gpu metrics
table for smu v13.0.6
v2:
Removed ESM register update
v3:
Updated patch subject and message
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Temperature needs to be reported in millidegree Celsius.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the right metrics table version based on the firmware.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2720
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The parameter amdgpu_mcbp shall have priority against the default value
calculated from the chip version.
User could disable mcbp by setting the parameter mcbp as zero.
v2: do not trigger preemption in sw ring muxer when mcbp is disabled.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0
V2: depend on pm.no_fan to check
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Use the dGPU path instead. There were a lot of platform
issues with IOMMU in general on these chips due to windows
not enabling IOMMU at the time. The dGPU path has been
used for a long time with newer APUs and works fine. This
also paves the way to simplify the driver significantly.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the dGPU path instead. There were a lot of platform
issues with IOMMU in general on these chips due to windows
not enabling IOMMU at the time. The dGPU path has been
used for a long time with newer APUs and works fine. This
also paves the way to simplify the driver significantly.
v2: use the dGPU queue manager functions
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are dropping the IOMMUv2 path, so no need to enable this.
It's often buggy on consumer platforms anyway.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is only required for SR-IOV world switches, but it
adds additional latency leading to reduced performance in
some benchmarks. Disable for now on bare metal.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCE products don't define a `remove_stream_from_ctx` like DCN ones
do. This means that when compute_mst_dsc_configs_for_state() is called
it always returns -EINVAL which causes MST to fail to setup.
Cc: stable@vger.kernel.org # 6.4.y
Cc: Harry Wentland <Harry.Wentland@amd.com>
Reported-by: Klaus.Kusche@computerix.info
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2671
Fixes: efa4c4df86 ("drm/amd/display: call remove_stream_from_ctx from res_pool funcs")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the gang_size check is outside of chunk parsing
loop, we need to reset i before we free the chunk data.
Suggested by Ye Zhang (@VAR10CK) of Baidu Security.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Energy counter should be reported in units of 15.259 uJ. Don't apply
any conversion.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't set predefined degamma curve to cursor plane if the cursor
attribute flag is not set. Applying a degamma curve to the cursor by
default breaks userspace expectation. Checking the flag before
performing any color transformation prevents too dark cursor gamma in
DCN3+ on many Linux desktop environment (KDE Plasma, GNOME,
wlroots-based, etc.) as reported at:
- https://gitlab.freedesktop.org/drm/amd/-/issues/1513
This is the same approach followed by DCN2 drivers where the issue is
not present.
Fixes: 03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1513
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The existing OD interface cannot support the growing demand for more
OD features. We are in the transition to a new OD mechanism. So,
disable the SMU13 OD feature support temporarily. And this should be
reverted when the new OD mechanism online.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
correct the pcie width value in pp_dpm_pcie for smu 13.0.0
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Some systems are only connected by HDMI or DP, so warning related to
missing eDP is unnecessary. Downgrade to debug instead.
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Fixes: 6d9b6dceaa ("drm/amd/display: only warn once in dce110_edp_wait_for_hpd_ready()")
Reported-by: Mastan.Katragadda@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On PSP v13.x ASICs, boot loader will set only the MSB to 1 and clear the
least significant bits for any command submission. Hence match against
the exact register value, otherwise a register value of all 0xFFs also
could falsely indicate that boot loader is ready. Also, from PSP v13.0.6
and newer, bits[7:0] will be used to indicate command error status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SMU v13.0.4/11, driver does not need to stop RLC for S0i3,
the firmwares will handle that properly.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users report a white flickering screen on multiple systems that
is tied to having 64GB or more memory. When S/G is enabled pages
will get pinned to both VRAM carve out and system RAM leading to
this.
Until it can be fixed properly, disable S/G when 64GB of memory or
more is detected. This will force pages to be pinned into VRAM.
This should fix white screen flickers but if VRAM pressure is
encountered may lead to black screens. It's a trade-off for now.
Fixes: 81d0bcf990 ("drm/amdgpu: make display pinning more flexible (v2)")
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: <stable@vger.kernel.org> # 6.1.y: bf0207e172 ("drm/amdgpu: add S/G display parameter")
Cc: <stable@vger.kernel.org> # 6.4.y
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2735
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX v9.4.3, compute queue MQD is populated using the values in HQD
persistent state register. Hence don't clear the values on module
unload, instead restore it to the default reset value so that MQD is
initialized correctly during next module load. In particular, preload
flag needs to be set on compute queue MQD, otherwise it could cause
uninitialized values being used at device reset state resulting in EDC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This error path needs to unlock the "aconnector->handle_mst_msg_ready"
mutex before returning.
Fixes: 4f6d9e38c4 ("drm/amd/display: Add polling method to handle MST reply packet")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DMUB may hang when powering down pixel clocks due to no dprefclk.
It is fixed by exiting idle optimization before the attempt to access PHY.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
It is not valid to set the WDIVIDER value to 0, so do not
re-write to DISPCLK_WDIVIDER if the current value is 0
(i.e., it is at it's initial value and we have not made any
requests to change DISPCLK yet).
Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current yellow carp B0 PHYD32CLK logic is incorrectly applied to other
ASICs.
[How]
Add guard to check chip family is yellow carp before applying logic.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Report current GFX clock also from average clock value as the original
CurrClock data is not valid/accurate any more as per FW team
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the second call to amdgpu_bo_create_kernel() fails, the memory
allocated from the first call should be cleared. If the third call
fails, the memory from the second call should be cleared.
Fixes: b95b539168 ("drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An instance of for_each_inst() was not changed to match its new
behaviour and is causing a loop.
v2: remove tmp_mask variable
Fixes: b579ea632f ("drm/amdgpu: Modify for_each_inst macro")
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the list of devices that require the cwsr trap handling
workaround for debugging use cases.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Ruili Ji <ruili.ji@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
~0 as no xcp partition is used in several places, so improve its
definition by a macro for code consistency.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Other PDs/PTs allocation should just use the same xcp_id as that
stored in root PD.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Recent code set xcp_id stored from file private data when opening
device to amdgpu bo for accounting memory usage etc, but not all
VMs are attached to this fpriv structure like the vm cases in
amdgpu_mes_self_test, otherwise, KASAN will complain below out
of bound access. And more importantly, VM code should not touch
fpriv structure, so drop fpriv code handling from amdgpu_vm_pt.
[ 77.292314] BUG: KASAN: slab-out-of-bounds in amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.293845] Read of size 4 at addr ffff888102c48a48 by task modprobe/1069
[ 77.294146] Call Trace:
[ 77.294178] <TASK>
[ 77.294208] dump_stack_lvl+0x49/0x63
[ 77.294260] print_report+0x16f/0x4a6
[ 77.294307] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.295979] ? kasan_complete_mode_report_info+0x3c/0x200
[ 77.296057] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.297556] kasan_report+0xb4/0x130
[ 77.297609] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.299202] __asan_load4+0x6f/0x90
[ 77.299272] amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[ 77.300796] ? amdgpu_init+0x6e/0x1000 [amdgpu]
[ 77.302222] ? amdgpu_vm_pt_clear+0x750/0x750 [amdgpu]
[ 77.303721] ? preempt_count_sub+0x18/0xc0
[ 77.303786] amdgpu_vm_init+0x39e/0x870 [amdgpu]
[ 77.305186] ? amdgpu_vm_wait_idle+0x90/0x90 [amdgpu]
[ 77.306683] ? kasan_set_track+0x25/0x30
[ 77.306737] ? kasan_save_alloc_info+0x1b/0x30
[ 77.306795] ? __kasan_kmalloc+0x87/0xa0
[ 77.306852] amdgpu_mes_self_test+0x169/0x620 [amdgpu]
v2: without specifying xcp partition for PD/PT bo, the xcp id is -1.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2686
Fixes: 3ebfd221c1 ("drm/amdkfd: Store xcp partition id to amdgpu bo")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
file_priv needs to be setup firstly, otherwise, root PD
will always be allocated on partition 0, even if opening
the device from other partitions.
Fixes: 3ebfd221c1 ("drm/amdkfd: Store xcp partition id to amdgpu bo")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Port of a change that went into DCN314 to keep the PHY enabled
when we have a connected and active DP display.
The PHY can hang if PHY refclk is disabled inadvertently.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In dcn314 DML the destination pipe vtotal was being set
to the crtc adjustment vtotal_min value even in cases
where that value is 0.
[How]
Only set vtotal to the crtc adjustment vtotal_min value
in cases where the value is non-zero.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
All of pipes will be used when the MPC split enable on the dcn
which just has 2 pipes. Then MPO enter will trigger the minimal
transition which need programe dcn from 2 pipes MPC split to 2
pipes MPO. This action will cause lag if happen frequently.
[HOW]
Disable the MPC split for the platform which dcn resource is limited
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
If there is no TG allocation we can dereference a NULL pointer when
checking if the TG is enabled.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Specific TBT4 dock doesn't send out short HPD to notify source
that IRQ event DOWN_REP_MSG_RDY is set. Which violates the spec
and cause source can't send out streams to mst sinks.
[How]
To cover this misbehavior, add an additional polling method to detect
DOWN_REP_MSG_RDY is set. HPD driven handling method is still kept.
Just hook up our handler to drm mgr->cbs->poll_hpd_irq().
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors & warnings reported by checkpatch:
ERROR: space required before the open brace '{'
ERROR: space required before the open parenthesis '('
ERROR: that open brace { should be on the previous line
ERROR: space prohibited before that ',' (ctx:WxW)
ERROR: else should follow close brace '}'
ERROR: open brace '{' following function definitions go on the next line
ERROR: code indent should use tabs where possible
WARNING: braces {} are not necessary for single statement blocks
WARNING: void function return statements are not generally useful
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow the initramfs generator to automatically include psp_13_0_6_ta
firmware to initramfs.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use current uclk to be consistent with other dGPUs.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Use average gfxclock for consistency with other dGPUs.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Up until now, amdgpu was silently degrading to vsync when
user-space requested an async flip but the hardware didn't support
it.
The hardware doesn't support immediate flips when the update changes
the FB pitch, the DCC state, the rotation, enables or disables CRTCs
or planes, etc. This is reflected in the dm_crtc_state.update_type
field: UPDATE_TYPE_FAST means that immediate flip is supported.
Silently degrading async flips to vsync is not the expected behavior
from a uAPI point-of-view. Xorg expects async flips to fail if
unsupported, to be able to fall back to a blit. i915 already behaves
this way.
This patch aligns amdgpu with uAPI expectations and returns a failure
when an async flip is not possible.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
In below thousands of screen rotation loop tests with virtual display
enabled, a CPU hard lockup issue may happen, leading system to unresponsive
and crash.
do {
xrandr --output Virtual --rotate inverted
xrandr --output Virtual --rotate right
xrandr --output Virtual --rotate left
xrandr --output Virtual --rotate normal
} while (1);
NMI watchdog: Watchdog detected hard LOCKUP on cpu 1
? hrtimer_run_softirq+0x140/0x140
? store_vblank+0xe0/0xe0 [drm]
hrtimer_cancel+0x15/0x30
amdgpu_vkms_disable_vblank+0x15/0x30 [amdgpu]
drm_vblank_disable_and_save+0x185/0x1f0 [drm]
drm_crtc_vblank_off+0x159/0x4c0 [drm]
? record_print_text.cold+0x11/0x11
? wait_for_completion_timeout+0x232/0x280
? drm_crtc_wait_one_vblank+0x40/0x40 [drm]
? bit_wait_io_timeout+0xe0/0xe0
? wait_for_completion_interruptible+0x1d7/0x320
? mutex_unlock+0x81/0xd0
amdgpu_vkms_crtc_atomic_disable
It's caused by a stuck in lock dependency in such scenario on different
CPUs.
CPU1 CPU2
drm_crtc_vblank_off hrtimer_interrupt
grab event_lock (irq disabled) __hrtimer_run_queues
grab vbl_lock/vblank_time_block amdgpu_vkms_vblank_simulate
amdgpu_vkms_disable_vblank drm_handle_vblank
hrtimer_cancel grab dev->event_lock
So CPU1 stucks in hrtimer_cancel as timer callback is running endless on
current clock base, as that timer queue on CPU2 has no chance to finish it
because of failing to hold the lock. So NMI watchdog will throw the errors
after its threshold, and all later CPUs are impacted/blocked.
So use hrtimer_try_to_cancel to fix this, as disable_vblank callback
does not need to wait the handler to finish. And also it's not necessary
to check the return value of hrtimer_try_to_cancel, because even if it's
-1 which means current timer callback is running, it will be reprogrammed
in hrtimer_start with calling enable_vblank to make it works.
v2: only re-arm timer when vblank is enabled (Christian) and add a Fixes
tag as well
v3: drop warn printing (Christian)
v4: drop superfluous check of blank->enabled in timer function, as it's
guaranteed in drm_handle_vblank (Christian)
Fixes: 84ec374bd5 ("drm/amdgpu: create amdgpu_vkms (v4)")
Cc: stable@vger.kernel.org
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
DCN301 does not have FAMS hence the workaround needed on other DCN3x
variants related to OTG min/max selector programming is not applicable for it.
Hence isolate it and have it use the old sequence without workaround.
Fixes: 1598fc5764 ("drm/amd/display: Program OTG vtotal min/max selectors unconditionally for DCN1+")
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Make a few functions non static so that they can be reused for other
asic. This is in preparation for separating out OTG programming sequence
for DCN301
Fixes: 1598fc5764 ("drm/amd/display: Program OTG vtotal min/max selectors unconditionally for DCN1+")
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU7 does a check if the dGPU is inserted into a Rocket Lake system,
to turn off DPM. Extend this check to all systems that have problems
with dynamic switching by using the
amdgpu_device_pcie_dynamic_switching_supported() helper.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu:
- SMU i2c locking fix
- Fix a possible deadlock in process restoration for ROCm apps
- Disable PCIe lane/speed switching on Intel platforms (the platforms don't support it)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZK7yYQAKCRC93/aFa7yZ
2JvYAQDpMj8/rLUsmWRk30jvkaZivgaeUEAG0FGaMpKaaATbvwEA2eHxN3xk5GKs
ethEPp/zdivIrz6h/JWSCFrpCzqg4g8=
=rsRJ
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-fixes-6.5-2023-07-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.5-2023-07-12:
amdgpu:
- SMU i2c locking fix
- Fix a possible deadlock in process restoration for ROCm apps
- Disable PCIe lane/speed switching on Intel platforms (the platforms don't support it)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230712184009.7740-1-alexander.deucher@amd.com
SMU13 overrides dynamic PCIe lane width and dynamic speed by when on
certain hosts. commit 38e4ced804 ("drm/amd/pm: conditionally disable
pcie lane switching for some sienna_cichlid SKUs") worked around this
issue by setting up certain SKUs to set up certain limits, but the same
fundamental problem with those hosts affects all SMU11 implmentations
as well, so align the SMU11 and SMU13 driver handling.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
This helper is used for checking if the connected host supports
the feature, it can be moved into generic code to be used by other
smu implementations as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
