beacon_inject_active turns true and false via debugfs when we inject a
beacon. During the time of the beacon injection we can't configure the
FW with a beacon cmd. If we have a hw restart during the beacon injection
then in the recovery flow we will not be able to configure the beacon
cmd to the FW. Fix this by cleaning up this variable after an hw restart.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.b021bce5e162.Ia5a0a0b5d8734f63077ceaac936176a345f8d3d1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As part of version 2 we don't need to have wake_packet_bufsize
and wake_packet_length. The first one is already calculated by the driver,
the latter is sent as part of the wake packet notification.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.3b53213b10d4.Ibf2f15aca614def2d262dd267d1aad65931b58f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When secure LTF is not used, the HLTK is not derived during the PASN
authentication. Make the HLTK optional when adding a PASN station.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.a57f7f3b59bd.Ifa88afb51a2516156153ac321d81556e295036c2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to hardware limitations when splitting up A-MSDUs, it
cannot handle an arbitrary number of MSDUs per A-MSDU. Set
the bits to ask transmitters to send only 8 MSDUs in one
A-MSDU.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.e6c518f2724f.I15c13d13b38289edbcd64f67d57cf18f6026457a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The aux queue is initialized to IWL_MVM_INVALID_QUEUE. This is
later used for a bitmask of the queue, which results in a
shift-out-of-bounds. Fix it.
Fixes: b85f7ebb24 ("wifi: iwlwifi: mvm: avoid UB shift of snif_queue")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.c41a33c32898.Idc15f9eed005345a4137c28ef62efd80a405fad0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Starting from version 4 of ANT_GAIN_CMD verification of ppag table
values is done by the FW. Driver has to send the complete table as
it appears in the BIOS. Make this change.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.a965365e2336.I1081f00ae309d9225d0529fa2da6ba7e34a8bd4f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
MCAST frames are filtered out by the driver if we are not
authorized yet.
Fix it to filter out only protected frames.
Fixes: 147eb05f24 ("iwlwifi: mvm: always tell the firmware to accept MCAST frames in BSS")
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.9cedcc27db60.I8fb7057981392660da482dd215e85c15946d3f4b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add debug print for different FW program counter details of
different CPU. Program counter pc details will be read from
TLV during init.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.862790d336a9.I34e2ea05a79e8b2552f7f221bacf3af0166cb9c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The checks of whether or not a frame is bufferable were not
taking into account that some action frames aren't, such as
FTM. Check this, which requires some changes to the function
ieee80211_is_bufferable_mmpdu() since we need the whole skb
for the checks now.
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the IPC registers are used for sleep control, setting
the IPC sleep bit already triggers an interrupt to the fw, so
there is no need to also set the doorbell. Setting also the
doorbell triggers the sleep interrupt twice which lead to
an assert.
Fixes: af08571d39 ("iwlwifi: pcie: support Bz suspend/resume trigger")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.b5f2f6e44d38.I4cb5b6ad4914db47a714e731c4c8b4db679cabce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PHY configuration command need to be sent to FW if the tx diversity
with SISO is supported.
This need to be sent to get the init notification from FW.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.c2121c8694a7.Ibee3dd8765ef4b7504660fa228a7c7eff78920af@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Max A-MPDU length exponent shall be set to 2 for EHT capable
device on 6GHz band in order to support 4MB aggregation.
Update HE MAC capabilities accordingly for station and softap
interfaces.
This change requires to add another ieee80211_sband_iftype_data for
uhb since high/uhb are no longer the same.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.1eee32cfd199.I9c5ff3a6956d509137deca620814935149516fbc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since Gl A-step devices use the old checksum hardware,
we shouldn't use the Bz code to check for A-MSDU
combining ability; fix that.
Fixes: ec18e7d4d2 ("wifi: iwlwifi: mvm: use old checksum for Bz A-step")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.8c445b943fee.Ibf772102ca712f59e2ee0cdd4c344011fcf445aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On queue remove, we should convert the TID value to the
firmware value (8 -> 15) just like we do on queue add.
Otherwise, the firmware will not be able to find the
correct queue to remove.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.6651077eaec3.Ia6868c8fc1a92063609bb057b6a618726712d0bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
update the device configuration for HR1 device for SO and SOF device.
QuZ device configuration is corrected to support specific CRF.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.86f08520323f.Ieccb50de47f877b85732000a0d67b645eeeb0c2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This function receives the queue id to reclaim packets from. Currently
we're passing to it the queue id we received from the FW in the flush
response. We don't do any check of this value and it might be invalid.
In such case we will refer to a pointer to a queue which might be NULL.
Fix this by adding a validity check of the queue id before using it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.a9c3fd32bce7.I5fbdcf3b1b80eb96a907116c166f19dc0aae7cb8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In __iwl_err(), if we rate-limit the message away, then
vaf.va is still NULL-initialized by the time we get to
the tracing code, which then crashes. When it doesn't
get rate-limited out, it's still wrong to reuse the old
args2 that was already printed, which is why we bother
making a copy in the first place.
Assign vaf.va properly to fix this.
Fixes: e5f1cc98cc ("iwlwifi: allow rate-limited error messages")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.e27134c6bcd4.Ib3894cd2ba7a5ad5e75912a7634f146ceaa569e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There're two identical entries for ax1650 device in
iwl_dev_info_table. Remove one of the duplicate entries.
Fixes: 953e66a723 ("iwlwifi: add new ax1650 killer device")
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230410140721.897683-2-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
clang with W=1 reports
drivers/net/wireless/intel/ipw2x00/ipw2200.c:381:19: error:
unused function '_ipw_read16' [-Werror,-Wunused-function]
static inline u16 _ipw_read16(struct ipw_priv *ipw, unsigned long ofs)
^
This function and its wrapping marco are not used, so remove them.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230319135418.1703380-1-trix@redhat.com
There are a few merge conflicts due to overlapping
fixes and changes, merge wireless/main to fix them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This function can be invoked for both MLO and non-MLO, so
it must deal with multi-link correctly. Notable, on auth
timeout, we'd otherwise get a warning due to the erroneous
deflink usage in MLO cases.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.b85f6052d51a.Iedfef4b4c4f3ca557aebc0093fdc3f5cfb49b507@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The link management queues associated with the broadcast stations
were forgotten and so the same queue was used with both broadcast
stations. This leads to lost frames and warnings on cleanup and
HW restart.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.0671fa976832.Id5aa9856fd5984e447f247e6d0c3979d9794a21a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the MLD code, we free probe_resp_data before we remove
the MAC from the firmware, so we might receive another one
from the device after freeing, and thus might leak it. Fix
that by moving the free later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.152b1715fc13.Ibd37fed1b24cd25012923ad9170d1fe33ab35c5c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This field is used only for host TLC, so it can reside inside
the corresponding lq_sta struct. Also, TLC lq_sta is cleared
in iwl_mvm_rs_rate_init() upon association, but max_agg_bufsize
is set earlier in iwl_mvm_sta_init(). Thus, place this field
in the persistent part of lq_sta to retain its value.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.d55361064e39.Ib79d30f27d94607d097f0192af2aacd455a17958@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
By using the internal station add the station is installed in
firmware with zeroed MAC addresses, which is wrong. Use the
full installation function instead, to fill all data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.62d5371bb3c7.Ie25b62125a3a022f76a36bae5fed9796c18698aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we remove the station, we call iwl_mvm_sta_del() which
returns true if we cannot remove it from the firmware yet,
which happens if this is the station ID for the AP station
that's still used because the MAC is still associated.
However, we still must free the link data as the station is
only kept alive in the firmware, in mac80211 and driver the
data structures are destroyed.
To fix that, we need to make iwl_mvm_mld_free_sta_link()
track whether or not the station is still alive in FW, as
otherwise we might reuse the station ID in the meantime and
iwl_mvm_mld_rm_sta_from_fw() would reject the later delete
from the firmware. Add an argument to it for that. Then we
can use the return value of iwl_mvm_sta_del() for that to
fix the issue, and call iwl_mvm_mld_rm_sta_from_fw() only
if we need to not keep the station in FW.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.1d81d4c71f35.I8fc60ac28ffc1147e9b1250e5e6237b3cb5516ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use the new macros from mac80211 that do lockdep checking
on the RCU dereferences, instead of hard-coding 1 as the
argument to rcu_dereference_protected().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.112df5c8dec2.I1a1008f5566e509953d988f254d15c9e58630418@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During link switching there might be a link that's marked
active but has no chanctx assigned (so it's not active from
our driver's POV), skip such links in power recalculation
without any warning.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.c629090bd5d2.If7a680d5e349d454f2122f936c21522b9528a55f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we change only idle, avoid sending the MAC context
command since it doesn't depend on idle state. This
also fixes an issue with the firmware because without
this we send the command during link switching, as we
just deactivated the first link, and we cannot send
this command when there's no active link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.f5218f8453ec.I1325ff14ec07a27dd7ea2c1c210a1721d969839f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we remove the AP station, we iterate over the links
and remove all the keys, however, the key iteration will
return all keys for all links, so skip the ones that we
don't need based on the link ID.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.e724878f502e.I66870d4629244b4b309be79e11cbbd384bdf93be@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a fw_id_to_link_sta array in mvm to track the link
STA for each firmware station ID, and then use that to
report the link a frame was received on (since we know
the station ID from firmware).
Notably, this fixes beacon tracking for the correct link
since mac80211 now queues and processes those on the one
link identified by the link ID only.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.c7dd3ec18077.I12ef9eb4a5b8b5c2b9d6bcaa1fda73b59eba39d8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
