mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2026-01-14 12:10:33 +00:00
d44fd4a767
9937 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Josh Triplett
|
519fe1bae7 |
ext4: Add a uapi header for ext4 userspace APIs
Create a uapi header include/uapi/linux/ext4.h, move the ioctls and associated data structures to the uapi header, and include it from fs/ext4/ext4.h. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: https://lore.kernel.org/r/680175260970d977d16b5cc7e7606483ec99eb63.1680402881.git.josh@joshtriplett.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> |
||
|
Chuck Lever
|
2fd5532044 |
net/handshake: Add a kernel API for requesting a TLSv1.3 handshake
To enable kernel consumers of TLS to request a TLS handshake, add support to net/handshake/ to request a handshake upcall. This patch also acts as a template for adding handshake upcall support for other kernel transport layer security providers. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Chuck Lever
|
3b3009ea8a |
net/handshake: Create a NETLINK service for handling handshake requests
When a kernel consumer needs a transport layer security session, it first needs a handshake to negotiate and establish a session. This negotiation can be done in user space via one of the several existing library implementations, or it can be done in the kernel. No in-kernel handshake implementations yet exist. In their absence, we add a netlink service that can: a. Notify a user space daemon that a handshake is needed. b. Once notified, the daemon calls the kernel back via this netlink service to get the handshake parameters, including an open socket on which to establish the session. c. Once the handshake is complete, the daemon reports the session status and other information via a second netlink operation. This operation marks that it is safe for the kernel to use the open socket and the security session established there. The notification service uses a multicast group. Each handshake mechanism (eg, tlshd) adopts its own group number so that the handshake services are completely independent of one another. The kernel can then tell via netlink_has_listeners() whether a handshake service is active and prepared to handle a handshake request. A new netlink operation, ACCEPT, acts like accept(2) in that it instantiates a file descriptor in the user space daemon's fd table. If this operation is successful, the reply carries the fd number, which can be treated as an open and ready file descriptor. While user space is performing the handshake, the kernel keeps its muddy paws off the open socket. A second new netlink operation, DONE, indicates that the user space daemon is finished with the socket and it is safe for the kernel to use again. The operation also indicates whether a session was established successfully. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Ondrej Kozina
|
9e05a2599a |
sed-opal: geometry feature reporting command
Locking range start and locking range length attributes may be require to satisfy restrictions exposed by OPAL2 geometry feature reporting. Geometry reporting feature is described in TCG OPAL SSC, section 3.1.1.4 (ALIGN, LogicalBlockSize, AlignmentGranularity and LowestAlignedLBA). 4.3.5.2.1.1 RangeStart Behavior: [ StartAlignment = (RangeStart modulo AlignmentGranularity) - LowestAlignedLBA ] When processing a Set method or CreateRow method on the Locking table for a non-Global Range row, if: a) the AlignmentRequired (ALIGN above) column in the LockingInfo table is TRUE; b) RangeStart is non-zero; and c) StartAlignment is non-zero, then the method SHALL fail and return an error status code INVALID_PARAMETER. 4.3.5.2.1.2 RangeLength Behavior: If RangeStart is zero, then [ LengthAlignment = (RangeLength modulo AlignmentGranularity) - LowestAlignedLBA ] If RangeStart is non-zero, then [ LengthAlignment = (RangeLength modulo AlignmentGranularity) ] When processing a Set method or CreateRow method on the Locking table for a non-Global Range row, if: a) the AlignmentRequired (ALIGN above) column in the LockingInfo table is TRUE; b) RangeLength is non-zero; and c) LengthAlignment is non-zero, then the method SHALL fail and return an error status code INVALID_PARAMETER In userspace we stuck to logical block size reported by general block device (via sysfs or ioctl), but we can not read 'AlignmentGranularity' or 'LowestAlignedLBA' anywhere else and we need to get those values from sed-opal interface otherwise we will not be able to report or avoid locking range setup INVALID_PARAMETER errors above. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Tested-by: Milan Broz <gmazyland@gmail.com> Link: https://lore.kernel.org/r/20230411090931.9193-2-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Ming Lei
|
2d786e66c9 |
block: ublk: switch to ioctl command encoding
All ublk commands(control, IO) should have taken ioctl command encoding from the beginning, because ioctl command encoding defines each code uniquely, so driver can figure out wrong command sent from userspace easily; 2) it might help security subsystem for audit uring cmd[1]. Unfortunately we didn't do that way, and it could be one lesson for ublk driver. So switch to ioctl command encoding now, we still support commands encoded in old way, but they become legacy definition. Any new command should take ioctl encoding. See ublksrv code for switching to ioctl command encoding in [2]. [1] https://lore.kernel.org/io-uring/CAHC9VhSVzujW9LOj5Km80AjU0EfAuukoLrxO6BEfnXeK_s6bAg@mail.gmail.com/ [2] https://github.com/ming1/ubdsrv/commits/ioctl_cmd_encoding Cc: Christoph Hellwig <hch@infradead.org> Cc: Ken Kurematsu <k.kurematsu@nskint.co.jp> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230418131810.855959-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
David Wei
|
ea97f6c855 |
io_uring: add support for multishot timeouts
A multishot timeout submission will repeatedly generate completions with the IORING_CQE_F_MORE cflag set. Depending on the value of the `off' field in the submission, these timeouts can either repeat indefinitely until cancelled (`off' = 0) or for a fixed number of times (`off' > 0). Only noseq timeouts (i.e. not dependent on the number of I/O completions) are supported. An indefinite timer will be cancelled if the CQ ever overflows. Signed-off-by: David Wei <davidhwei@meta.com> Link: https://lore.kernel.org/r/20230418225817.1905027-1-davidhwei@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Kevin Brodsky
|
31088f6f79 |
uapi/linux/const.h: prefer ISO-friendly __typeof__
typeof is (still) a GNU extension, which means that it cannot be used when
building ISO C (e.g. -std=c99). It should therefore be avoided in uapi
headers in favour of the ISO-friendly __typeof__.
Unfortunately this issue could not be detected by
CONFIG_UAPI_HEADER_TEST=y as the __ALIGN_KERNEL() macro is not expanded in
any uapi header.
This matters from a userspace perspective, not a kernel one. uapi
headers and their contents are expected to be usable in a variety of
situations, and in particular when building ISO C applications (with
-std=c99 or similar).
This particular problem can be reproduced by trying to use the
__ALIGN_KERNEL macro directly in application code, say:
#include <linux/const.h>
int align(int x, int a)
{
return __KERNEL_ALIGN(x, a);
}
and trying to build that with -std=c99.
Link: https://lkml.kernel.org/r/20230411092747.3759032-1-kevin.brodsky@arm.com
Fixes:
|
||
|
Yang Yang
|
a3b2aeac9d |
delayacct: track delays from IRQ/SOFTIRQ
Delay accounting does not track the delay of IRQ/SOFTIRQ. While
IRQ/SOFTIRQ could have obvious impact on some workloads productivity, such
as when workloads are running on system which is busy handling network
IRQ/SOFTIRQ.
Get the delay of IRQ/SOFTIRQ could help users to reduce such delay. Such
as setting interrupt affinity or task affinity, using kernel thread for
NAPI etc. This is inspired by "sched/psi: Add PSI_IRQ to track
IRQ/SOFTIRQ pressure"[1]. Also fix some code indent problems of older
code.
And update tools/accounting/getdelays.c:
/ # ./getdelays -p 156 -di
print delayacct stats ON
printing IO accounting
PID 156
CPU count real total virtual total delay total delay average
15 15836008 16218149 275700790 18.380ms
IO count delay total delay average
0 0 0.000ms
SWAP count delay total delay average
0 0 0.000ms
RECLAIM count delay total delay average
0 0 0.000ms
THRASHING count delay total delay average
0 0 0.000ms
COMPACT count delay total delay average
0 0 0.000ms
WPCOPY count delay total delay average
36 7586118 0.211ms
IRQ count delay total delay average
42 929161 0.022ms
[1] commit 52b1364ba0b1("sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure")
Link: https://lkml.kernel.org/r/202304081728353557233@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Jiang Xuexin <jiang.xuexin@zte.com.cn>
Cc: wangyong <wang.yong12@zte.com.cn>
Cc: junhua huang <huang.junhua@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Josh Triplett
|
ddc65971bb |
prctl: add PR_GET_AUXV to copy auxv to userspace
If a library wants to get information from auxv (for instance, AT_HWCAP/AT_HWCAP2), it has a few options, none of them perfectly reliable or ideal: - Be main or the pre-main startup code, and grub through the stack above main. Doesn't work for a library. - Call libc getauxval. Not ideal for libraries that are trying to be libc-independent and/or don't otherwise require anything from other libraries. - Open and read /proc/self/auxv. Doesn't work for libraries that may run in arbitrarily constrained environments that may not have /proc mounted (e.g. libraries that might be used by an init program or a container setup tool). - Assume you're on the main thread and still on the original stack, and try to walk the stack upwards, hoping to find auxv. Extremely bad idea. - Ask the caller to pass auxv in for you. Not ideal for a user-friendly library, and then your caller may have the same problem. Add a prctl that copies current->mm->saved_auxv to a userspace buffer. Link: https://lkml.kernel.org/r/d81864a7f7f43bca6afa2a09fc2e850e4050ab42.1680611394.git.josh@joshtriplett.org Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Qu Wenruo
|
604e6681e1 |
btrfs: scrub: reject unsupported scrub flags
Since the introduction of scrub interface, the only flag that we support is BTRFS_SCRUB_READONLY. Thus there is no sanity checks, if there are some undefined flags passed in, we just ignore them. This is problematic if we want to introduce new scrub flags, as we have no way to determine if such flags are supported. Address the problem by introducing a check for the flags, and if unsupported flags are set, return -EOPNOTSUPP to inform the user space. This check should be backported for all supported kernels before any new scrub flags are introduced. CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Gregory Price
|
3f67987cdc |
ptrace: Provide set/get interface for syscall user dispatch
The syscall user dispatch configuration can only be set by the task itself, but lacks a ptrace set/get interface which makes it impossible to implement checkpoint/restore for it. Add the required ptrace requests and the get/set functions in the syscall user dispatch code to make that possible. Signed-off-by: Gregory Price <gregory.price@memverge.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/r/20230407171834.3558-4-gregory.price@memverge.com |
||
|
Dave Marchevsky
|
d54730b50b |
bpf: Introduce opaque bpf_refcount struct and add btf_record plumbing
A 'struct bpf_refcount' is added to the set of opaque uapi/bpf.h types meant for use in BPF programs. Similarly to other opaque types like bpf_spin_lock and bpf_rbtree_node, the verifier needs to know where in user-defined struct types a bpf_refcount can be located, so necessary btf_record plumbing is added to enable this. bpf_refcount is sized to hold a refcount_t. Similarly to bpf_spin_lock, the offset of a bpf_refcount is cached in btf_record as refcount_off in addition to being in the field array. Caching refcount_off makes sense for this field because further patches in the series will modify functions that take local kptrs (e.g. bpf_obj_drop) to change their behavior if the type they're operating on is refcounted. So enabling fast "is this type refcounted?" checks is desirable. No such verifier behavior changes are introduced in this patch, just logic to recognize 'struct bpf_refcount' in btf_record. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Link: https://lore.kernel.org/r/20230415201811.343116-3-davemarchevsky@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Ming Qian
|
302b988ca0 |
media: Add ABGR64_12 video format
ABGR64_12 is a reversed RGB format with alpha channel last, 12 bits per component like ABGR32, expanded to 16bits. Data in the 12 high bits, zeros in the 4 low bits, arranged in little endian order. Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Ming Qian
|
da0b7a400e |
media: Add BGR48_12 video format
BGR48_12 is a reversed RGB format with 12 bits per component like BGR24, expanded to 16bits. Data in the 12 high bits, zeros in the 4 low bits, arranged in little endian order. Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Ming Qian
|
99c9549677 |
media: Add YUV48_12 video format
YUV48_12 is a YUV format with 12-bits per component like YUV24, expanded to 16bits. Data in the 12 high bits, zeros in the 4 low bits, arranged in little endian order. [hverkuil: replaced a . by ,] Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Ming Qian
|
a490ea6844 |
media: Add Y012 video format
Y012 is a luma-only formats with 12-bits per pixel, expanded to 16bits. Data in the 12 high bits, zeros in the 4 low bits, arranged in little endian order. Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Ming Qian
|
aa10804042 |
media: Add P012 and P012M video format
P012 is a YUV format with 12-bits per component with interleaved UV, like NV12, expanded to 16 bits. Data in the 12 high bits, zeros in the 4 low bits, arranged in little endian order. And P012M has two non contiguous planes. Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Tomi Valkeinen
|
f57fa29592 |
media: v4l2-subdev: Add new ioctl for client capabilities
Add new ioctls to set and get subdev client capabilities. Client in this context means the userspace application which opens the subdev device node. The client capabilities are stored in the file handle of the opened subdev device node, and the client must set the capabilities for each opened subdev. For now we only add a single flag, V4L2_SUBDEV_CLIENT_CAP_STREAMS, which indicates that the client is streams-aware. The reason for needing such a flag is as follows: Many structs passed via ioctls, e.g. struct v4l2_subdev_format, contain reserved fields (usually a single array field). These reserved fields can be used to extend the ioctl. The userspace is required to zero the reserved fields. We recently added a new 'stream' field to many of these structs, and the space for the field was taken from these reserved arrays. The assumption was that these new 'stream' fields are always initialized to zero if the userspace does not use them. This was a mistake, as, as mentioned above, the userspace is required to zero the _reserved_ fields. In other words, there is no requirement to zero this new stream field, and if the userspace doesn't use the field (which is the case for all userspace applications at the moment), the field may contain random data. This shows that the way the reserved fields are defined in v4l2 is, in my opinion, somewhat broken, but there is nothing to do about that. To fix this issue we need a way for the userspace to tell the kernel that the userspace has indeed set the 'stream' field, and it's fine for the kernel to access it. This is achieved with the new ioctl, which the userspace should usually use right after opening the subdev device node. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Vladimir Oltean
|
a721c3e54b |
net/sched: taprio: allow per-TC user input of FP adminStatus
This is a duplication of the FP adminStatus logic introduced for tc-mqprio. Offloading is done through the tc_mqprio_qopt_offload structure embedded within tc_taprio_qopt_offload. So practically, if a device driver is written to treat the mqprio portion of taprio just like standalone mqprio, it gets unified handling of frame preemption. I would have reused more code with taprio, but this is mostly netlink attribute parsing, which is hard to transform into generic code without having something that stinks as a result. We have the same variables with the same semantics, just different nlattr type values (TCA_MQPRIO_TC_ENTRY=5 vs TCA_TAPRIO_ATTR_TC_ENTRY=12; TCA_MQPRIO_TC_ENTRY_FP=2 vs TCA_TAPRIO_TC_ENTRY_FP=3, etc) and consequently, different policies for the nest. Every time nla_parse_nested() is called, an on-stack table "tb" of nlattr pointers is allocated statically, up to the maximum understood nlattr type. That array size is hardcoded as a constant, but when transforming this into a common parsing function, it would become either a VLA (which the Linux kernel rightfully doesn't like) or a call to the allocator. Having FP adminStatus in tc-taprio can be seen as addressing the 802.1Q Annex S.3 "Scheduling and preemption used in combination, no HOLD/RELEASE" and S.4 "Scheduling and preemption used in combination with HOLD/RELEASE" use cases. HOLD and RELEASE events are emitted towards the underlying MAC Merge layer when the schedule hits a Set-And-Hold-MAC or a Set-And-Release-MAC gate operation. So within the tc-taprio UAPI space, one can distinguish between the 2 use cases by choosing whether to use the TC_TAPRIO_CMD_SET_AND_HOLD and TC_TAPRIO_CMD_SET_AND_RELEASE gate operations within the schedule, or just TC_TAPRIO_CMD_SET_GATES. A small part of the change is dedicated to refactoring the max_sdu nlattr parsing to put all logic under the "if" that tests for presence of that nlattr. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
f62af20bed |
net/sched: mqprio: allow per-TC user input of FP adminStatus
IEEE 802.1Q-2018 clause 6.7.2 Frame preemption specifies that each packet priority can be assigned to a "frame preemption status" value of either "express" or "preemptible". Express priorities are transmitted by the local device through the eMAC, and preemptible priorities through the pMAC (the concepts of eMAC and pMAC come from the 802.3 MAC Merge layer). The FP adminStatus is defined per packet priority, but 802.1Q clause 12.30.1.1.1 framePreemptionAdminStatus also says that: | Priorities that all map to the same traffic class should be | constrained to use the same value of preemption status. It is impossible to ignore the cognitive dissonance in the standard here, because it practically means that the FP adminStatus only takes distinct values per traffic class, even though it is defined per priority. I can see no valid use case which is prevented by having the kernel take the FP adminStatus as input per traffic class (what we do here). In addition, this also enforces the above constraint by construction. User space network managers which wish to expose FP adminStatus per priority are free to do so; they must only observe the prio_tc_map of the netdev (which presumably is also under their control, when constructing the mqprio netlink attributes). The reason for configuring frame preemption as a property of the Qdisc layer is that the information about "preemptible TCs" is closest to the place which handles the num_tc and prio_tc_map of the netdev. If the UAPI would have been any other layer, it would be unclear what to do with the FP information when num_tc collapses to 0. A key assumption is that only mqprio/taprio change the num_tc and prio_tc_map of the netdev. Not sure if that's a great assumption to make. Having FP in tc-mqprio can be seen as an implementation of the use case defined in 802.1Q Annex S.2 "Preemption used in isolation". There will be a separate implementation of FP in tc-taprio, for the other use cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
c2865b1122 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZDhSiwAKCRDbK58LschI
g8cbAQCH4xrquOeDmYyGXFQGchHZAIj++tKg8ABU4+hYeJtrlwEA6D4W6wjoSZRk
mLSptZ9qro8yZA86BvyPvlBT1h9ELQA=
=StAc
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-04-13
We've added 260 non-merge commits during the last 36 day(s) which contain
a total of 356 files changed, 21786 insertions(+), 11275 deletions(-).
The main changes are:
1) Rework BPF verifier log behavior and implement it as a rotating log
by default with the option to retain old-style fixed log behavior,
from Andrii Nakryiko.
2) Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params, from Christian Ehrig.
3) Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton,
from Alexei Starovoitov.
4) Optimize hashmap lookups when key size is multiple of 4,
from Anton Protopopov.
5) Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps, from David Vernet.
6) Add support for stashing local BPF kptr into a map value via
bpf_kptr_xchg(). This is useful e.g. for rbtree node creation
for new cgroups, from Dave Marchevsky.
7) Fix BTF handling of is_int_ptr to skip modifiers to work around
tracing issues where a program cannot be attached, from Feng Zhou.
8) Migrate a big portion of test_verifier unit tests over to
test_progs -a verifier_* via inline asm to ease {read,debug}ability,
from Eduard Zingerman.
9) Several updates to the instruction-set.rst documentation
which is subject to future IETF standardization
(https://lwn.net/Articles/926882/), from Dave Thaler.
10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register
known bits information propagation, from Daniel Borkmann.
11) Add skb bitfield compaction work related to BPF with the overall goal
to make more of the sk_buff bits optional, from Jakub Kicinski.
12) BPF selftest cleanups for build id extraction which stand on its own
from the upcoming integration work of build id into struct file object,
from Jiri Olsa.
13) Add fixes and optimizations for xsk descriptor validation and several
selftest improvements for xsk sockets, from Kal Conley.
14) Add BPF links for struct_ops and enable switching implementations
of BPF TCP cong-ctls under a given name by replacing backing
struct_ops map, from Kui-Feng Lee.
15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable
offset stack read as earlier Spectre checks cover this,
from Luis Gerhorst.
16) Fix issues in copy_from_user_nofault() for BPF and other tracers
to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner
and Alexei Starovoitov.
17) Add --json-summary option to test_progs in order for CI tooling to
ease parsing of test results, from Manu Bretelle.
18) Batch of improvements and refactoring to prep for upcoming
bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator,
from Martin KaFai Lau.
19) Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations,
from Quentin Monnet.
20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting
the module name from BTF of the target and searching kallsyms of
the correct module, from Viktor Malik.
21) Improve BPF verifier handling of '<const> <cond> <non_const>'
to better detect whether in particular jmp32 branches are taken,
from Yonghong Song.
22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock.
A built-in cc or one from a kernel module is already able to write
to app_limited, from Yixin Shen.
Conflicts:
Documentation/bpf/bpf_devel_QA.rst
|
||
|
Jakub Kicinski
|
800e68c44f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts: tools/testing/selftests/net/config |
||
|
Dave Jiang
|
2442b7473a |
dmaengine: idxd: process batch descriptor completion record faults
Add event log processing for faulting of user batch descriptor completion record. When encountering an event log entry for a page fault on a completion record, the driver is expected to do the following: 1. If the "first error in batch" bit in event log entry error info is set, discard any previously recorded errors associated with the "batch identifier". 2. Fix the page fault according to the fault address in the event log. If successful, write the completion record to the fault address in user space. 3. If an error is encountered while writing the completion record and it is associated to a descriptor in the batch, the driver associates the error with the batch identifier of the event log entry and tracks it until the event log entry for the corresponding batch desc is encountered. While processing an event log entry for a batch descriptor with error indicating that one or more descs in the batch had event log entries, the driver will do the following before writing the batch completion record: 1. If the status field of the completion record is 0x1, the driver will change it to error code 0x5 (one or more operations in batch completed with status not successful) and changes the result field to 1. 2. If the status is error code 0x6 (page fault on batch descriptor list address), change the result field to 1. 3. If status is any other value, the completion record is not changed. 4. Clear the recorded error in preparation for next batch with same batch identifier. The result field is for user software to determine whether to set the "Batch Error" flag bit in the descriptor for continuation of partial batch descriptor completion. See DSA spec 2.0 for additional information. If no error has been recorded for the batch, the batch completion record is written to user space as is. Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-12-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Dave Jiang
|
6926987185 |
dmaengine: idxd: add descs_completed field for completion record
The descs_completed field for a completion record is part of a batch descriptor completion record. It takes the same location as bytes_completed in a normal descriptor field. Add to expose to user. Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-11-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Dave Jiang
|
c40bd7d973 |
dmaengine: idxd: process user page faults for completion record
DSA supports page fault handling through PRS. However, the DMA engine that's processing the descriptor is blocked until the PRS response is received. Other workqueues sharing the engine are also blocked. Page fault handing by the driver with PRS disabled can be used to mitigate the stalling. With PRS disabled while ATS remain enabled, DSA handles page faults on a completion record by reporting an event in the event log. In this instance, the descriptor is completed and the event log contains the completion record address and the contents of the completion record. Add support to the event log handling code to fault in the completion record and copy the content of the completion record to user memory. A bitmap is introduced to keep track of discarded event log entries. When the user process initiates ->release() of the char device, it no longer is interested in any remaining event log entries tied to the relevant wq and PASID. The driver will mark the event log entry index in the bitmap. Upon encountering the entries during processing, the event log handler will just clear the bitmap bit and skip the entry rather than attempt to process the event log entry. Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-10-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Dave Jiang
|
5fbe6503b5 |
dmanegine: idxd: add debugfs for event log dump
Add debugfs entry to dump the content of the event log for debugging. The function will dump all non-zero entries in the event log. It will note which entries are processed and which entries are still pending processing at the time of the dump. The entries may not always be in chronological order due to the log is a circular buffer. Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-6-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Dave Jiang
|
2f431ba908 |
dmaengine: idxd: add interrupt handling for event log
An event log interrupt is raised in the misc interrupt INTCAUSE register when an event is written by the hardware. Add basic event log processing support to the interrupt handler. The event log is a ring where the hardware owns the tail and the software owns the head. The hardware will advance the tail index when an additional event has been pushed to memory. The software will process the log entry and then advances the head. The log is full when (tail + 1) % log_size = head. The hardware will stop writing when the log is full. The user is expected to create a log size large enough to handle all the expected events. Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-5-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Dave Jiang
|
244da66cda |
dmaengine: idxd: setup event log configuration
Add setup of event log feature for supported device. Event log addresses error reporting that was lacking in gen 1 DSA devices where a second error event does not get reported when a first event is pending software handling. The event log allows a circular buffer that the device can push error events to. It is up to the user to create a large enough event log ring in order to capture the expected events. The evl size can be set in the device sysfs attribute. By default 64 entries are supported as minimal when event log is enabled. Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-4-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Andrii Nakryiko
|
47a71c1f9a |
bpf: Add log_true_size output field to return necessary log buffer size
Add output-only log_true_size and btf_log_true_size field to BPF_PROG_LOAD and BPF_BTF_LOAD commands, respectively. It will return the size of log buffer necessary to fit in all the log contents at specified log_level. This is very useful for BPF loader libraries like libbpf to be able to size log buffer correctly, but could be used by users directly, if necessary, as well. This patch plumbs all this through the code, taking into account actual bpf_attr size provided by user to determine if these new fields are expected by users. And if they are, set them from kernel on return. We refactory btf_parse() function to accommodate this, moving attr and uattr handling inside it. The rest is very straightforward code, which is split from the logging accounting changes in the previous patch to make it simpler to review logic vs UAPI changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-13-andrii@kernel.org |
||
|
Ming Qian
|
ec9aa62a1e |
media: add RealVideo format RV30 and RV40
RealVideo, or also spelled as Real Video, is a suite of proprietary video compression formats developed by RealNetworks - the specific format changes with the version. RealVideo codecs are identified by four-character codes. RV30 and RV40 are RealNetworks' proprietary H.264-based codecs. Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Ming Qian
|
ae77d13914 |
media: add Sorenson Spark video format
Sorenson Spark is an implementation of H.263 for use in Flash Video and Adobe Flash files. Sorenson Spark is an incomplete implementation of H.263. It differs mostly in header structure and ranges of the coefficients. Signed-off-by: Ming Qian <ming.qian@nxp.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Axel Rasmussen
|
0289184476 |
mm: userfaultfd: add UFFDIO_CONTINUE_MODE_WP to install WP PTEs
UFFDIO_COPY already has UFFDIO_COPY_MODE_WP, so when installing a new PTE
to resolve a missing fault, one can install a write-protected one. This
is useful when using UFFDIO_REGISTER_MODE_{MISSING,WP} in combination.
This was motivated by testing HugeTLB HGM [1], and in particular its
interaction with userfaultfd features. Existing userfaultfd code supports
using WP and MINOR modes together (i.e. you can register an area with
both enabled), but without this CONTINUE flag the combination is in
practice unusable.
So, add an analogous UFFDIO_CONTINUE_MODE_WP, which does the same thing as
UFFDIO_COPY_MODE_WP, but for *minor* faults.
Update the selftest to do some very basic exercising of the new flag.
Update Documentation/ to describe how these flags are used (neither the
COPY nor the new CONTINUE versions of this mode flag were described there
before).
[1]: https://patchwork.kernel.org/project/linux-mm/cover/20230218002819.1486479-1-jthoughton@google.com/
Link: https://lkml.kernel.org/r/20230314221250.682452-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Peter Xu
|
2bad466cc9 |
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED
Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4.
The new feature bit makes anonymous memory acts the same as file memory on
userfaultfd-wp in that it'll also wr-protect none ptes.
It can be useful in two cases:
(1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot,
so pre-fault can be replaced by enabling this flag and speed up
protections
(2) It helps to implement async uffd-wp mode that Muhammad is working on [1]
It's debatable whether this is the most ideal solution because with the
new feature bit set, wr-protect none pte needs to pre-populate the
pgtables to the last level (PAGE_SIZE). But it seems fine so far to
service either purpose above, so we can leave optimizations for later.
The series brings pte markers to anonymous memory too. There's some
change in the common mm code path in the 1st patch, great to have some eye
looking at it, but hopefully they're still relatively straightforward.
This patch (of 2):
This is a new feature that controls how uffd-wp handles none ptes. When
it's set, the kernel will handle anonymous memory the same way as file
memory, by allowing the user to wr-protect unpopulated ptes.
File memories handles none ptes consistently by allowing wr-protecting of
none ptes because of the unawareness of page cache being exist or not.
For anonymous it was not as persistent because we used to assume that we
don't need protections on none ptes or known zero pages.
One use case of such a feature bit was VM live snapshot, where if without
wr-protecting empty ptes the snapshot can contain random rubbish in the
holes of the anonymous memory, which can cause misbehave of the guest when
the guest OS assumes the pages should be all zeros.
QEMU worked it around by pre-populate the section with reads to fill in
zero page entries before starting the whole snapshot process [1].
Recently there's another need raised on using userfaultfd wr-protect for
detecting dirty pages (to replace soft-dirty in some cases) [2]. In that
case if without being able to wr-protect none ptes by default, the dirty
info can get lost, since we cannot treat every none pte to be dirty (the
current design is identify a page dirty based on uffd-wp bit being
cleared).
In general, we want to be able to wr-protect empty ptes too even for
anonymous.
This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make
uffd-wp handling on none ptes being consistent no matter what the memory
type is underneath. It doesn't have any impact on file memories so far
because we already have pte markers taking care of that. So it only
affects anonymous.
The feature bit is by default off, so the old behavior will be maintained.
Sometimes it may be wanted because the wr-protect of none ptes will
contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte
markers to anonymous), but also on creating the pgtables to store the pte
markers. So there's potentially less chance of using thp on the first
fault for a none pmd or larger than a pmd.
The major implementation part is teaching the whole kernel to understand
pte markers even for anonymously mapped ranges, meanwhile allowing the
UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the
new feature bit is set.
Note that even if the patch subject starts with mm/uffd, there're a few
small refactors to major mm path of handling anonymous page faults. But
they should be straightforward.
With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all
the memory before wr-protect during taking a live snapshot. Quotting from
Muhammad's test result here [3] based on a simple program [4]:
(1) With huge page disabled
echo madvise > /sys/kernel/mm/transparent_hugepage/enabled
./uffd_wp_perf
Test DEFAULT: 4
Test PRE-READ: 1111453 (pre-fault
|
||
|
Ondrej Kozina
|
4c4dd04e75 |
sed-opal: Add command to read locking range parameters.
It returns following attributes: locking range start locking range length read lock enabled write lock enabled lock state (RW, RO or LK) It can be retrieved by user authority provided the authority was added to locking range via prior IOC_OPAL_ADD_USR_TO_LR ioctl command. The command was extended to add user in ACE that allows to read attributes listed above. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Link: https://lore.kernel.org/r/20230405111223.272816-6-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Oliver Upton
|
e65733b5c5 |
KVM: x86: Redefine 'longmode' as a flag for KVM_EXIT_HYPERCALL
The 'longmode' field is a bit annoying as it blows an entire __u32 to represent a boolean value. Since other architectures are looking to add support for KVM_EXIT_HYPERCALL, now is probably a good time to clean it up. Redefine the field (and the remaining padding) as a set of flags. Preserve the existing ABI by using bit 0 to indicate if the guest was in long mode and requiring that the remaining 31 bits must be zero. Cc: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230404154050.2270077-2-oliver.upton@linux.dev |
||
|
Dmitry Fomichev
|
f1ba4e674f |
virtio-blk: fix to match virtio spec
The merged patch series to support zoned block devices in virtio-blk
is not the most up to date version. The merged patch can be found at
https://lore.kernel.org/linux-block/20221016034127.330942-3-dmitry.fomichev@wdc.com/
but the latest and reviewed version is
https://lore.kernel.org/linux-block/20221110053952.3378990-3-dmitry.fomichev@wdc.com/
The reason is apparently that the correct mailing lists and
maintainers were not copied.
The differences between the two are mostly cleanups, but there is one
change that is very important in terms of compatibility with the
approved virtio-zbd specification.
Before it was approved, the OASIS virtio spec had a change in
VIRTIO_BLK_T_ZONE_APPEND request layout that is not reflected in the
current virtio-blk driver code. In the running code, the status is
the first byte of the in-header that is followed by some pad bytes
and the u64 that carries the sector at which the data has been written
to the zone back to the driver, aka the append sector.
This layout turned out to be problematic for implementing in QEMU and
the request status byte has been eventually made the last byte of the
in-header. The current code doesn't expect that and this causes the
append sector value always come as zero to the block layer. This needs
to be fixed ASAP.
Fixes:
|
||
|
Pavel Begunkov
|
d322818ef4 |
io_uring: kill unused notif declarations
There are two leftover structures from the notification registration mechanism that has never been released, kill them. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/f05f65aebaf8b1b5bf28519a8fdb350e3e7c9ad0.1679924536.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
c56e022c0a |
io_uring: add support for user mapped provided buffer ring
The ring mapped provided buffer rings rely on the application allocating the memory for the ring, and then the kernel will map it. This generally works fine, but runs into issues on some architectures where we need to be able to ensure that the kernel and application virtual address for the ring play nicely together. This at least impacts architectures that set SHM_COLOUR, but potentially also anyone setting SHMLBA. To use this variant of ring provided buffers, the application need not allocate any memory for the ring. Instead the kernel will do so, and the allocation must subsequently call mmap(2) on the ring with the offset set to: IORING_OFF_PBUF_RING | (bgid << IORING_OFF_PBUF_SHIFT) to get a virtual address for the buffer ring. Normally the application would allocate a suitable piece of memory (and correctly aligned) and simply pass that in via io_uring_buf_reg.ring_addr and the kernel would map it. Outside of the setup differences, the kernel allocate + user mapped provided buffer ring works exactly the same. Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
81cf17cd3a |
io_uring/kbuf: rename struct io_uring_buf_reg 'pad' to'flags'
In preparation for allowing flags to be set for registration, rename the padding and use it for that. Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jakub Kicinski
|
54fd494af9 |
netfilter updates for net-next
1. No need to disable BH in nfnetlink proc handler, freeing happens
via call_rcu.
2. Expose classid in nfetlink_queue, from Eric Sage.
3. Fix nfnetlink message description comments, from Matthieu De Beule.
4. Allow removal of offloaded connections via ctnetlink, from Paul Blakey.
Signed-off-by: Florian Westphal <fw@strlen.de>
-----BEGIN PGP SIGNATURE-----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=EBSm
-----END PGP SIGNATURE-----
Merge tag 'nf-next-2023-03-30' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter updates for net-next
1. No need to disable BH in nfnetlink proc handler, freeing happens
via call_rcu.
2. Expose classid in nfetlink_queue, from Eric Sage.
3. Fix nfnetlink message description comments, from Matthieu De Beule.
4. Allow removal of offloaded connections via ctnetlink, from Paul Blakey.
* tag 'nf-next-2023-03-30' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: ctnetlink: Support offloaded conntrack entry deletion
netfilter: Correct documentation errors in nf_tables.h
netfilter: nfnetlink_queue: enable classid socket info retrieval
netfilter: nfnetlink_log: remove rcu_bh usage
====================
Link: https://lore.kernel.org/r/20230331104809.2959-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Fenghua Yu
|
6fec8938b7 |
dmaengine: idxd: Add descriptor definitions for translation fetch operation
The translation fetch operation (0x0A) fetches address translations for the address range specified in the descriptor by issuing address translation (ATS) requests to the IOMMU. Add descriptor definitions for the operation so that user can use DSA to accelerate translation fetch. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230303213413.3357431-4-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Fenghua Yu
|
12bbc2c260 |
dmaengine: idxd: Add descriptor definitions for DIX generate operation
The Data Integrity Extension (DIX) generate operation (0x17) computes the Data Integrity Field (DIF) on the source data and writes only the computed DIF for each source block to the PI destination address. Add descriptor definitions for this operation so that user can use DSA to accelerate DIX generate operation. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230303213413.3357431-3-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Fenghua Yu
|
9e410fe3dc |
dmaengine: idxd: Add descriptor definitions for 16 bytes of pattern in memory fill operation
The memory fill operation (0x04) can fill in memory with either 8 bytes or 16 bytes of pattern. To fill in memory with 16 bytes of pattern, the first 8 bytes are provided in pattern lower in bytes 16-23 and the next 8 bytes are in pattern upper in bytes 40-47 in the descriptor. Currently only 8 bytes of pattern is enabled. Add descriptor definitions for pattern lower and pattern upper so that user can use 16 bytes of pattern to fill memory. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230303213413.3357431-2-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Jakub Kicinski
|
ce7928f7cf |
Major stack changes:
* TC offload support for drivers below mac80211
* reduced neighbor report (RNR) handling for AP mode
* mac80211 mesh fast-xmit and fast-rx support
* support for another mesh A-MSDU format
(seems nobody got the spec right)
Major driver changes:
Kalle moved the drivers that were just plain C files
in drivers/net/wireless/ to legacy/ and virtual/ dirs.
hwsim
* multi-BSSID support
* some FTM support
ath11k
* MU-MIMO parameters support
* ack signal support for management packets
rtl8xxxu
* support for RTL8710BU aka RTL8188GU chips
rtw89
* support for various newer firmware APIs
ath10k
* enabled threaded NAPI on WCN3990
iwlwifi
* lots of work for multi-link/EHT (wifi7)
* hardware timestamping support for some devices/firwmares
* TX beacon protection on newer hardware
-----BEGIN PGP SIGNATURE-----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=Zi6X
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Major stack changes:
* TC offload support for drivers below mac80211
* reduced neighbor report (RNR) handling for AP mode
* mac80211 mesh fast-xmit and fast-rx support
* support for another mesh A-MSDU format
(seems nobody got the spec right)
Major driver changes:
Kalle moved the drivers that were just plain C files
in drivers/net/wireless/ to legacy/ and virtual/ dirs.
hwsim
* multi-BSSID support
* some FTM support
ath11k
* MU-MIMO parameters support
* ack signal support for management packets
rtl8xxxu
* support for RTL8710BU aka RTL8188GU chips
rtw89
* support for various newer firmware APIs
ath10k
* enabled threaded NAPI on WCN3990
iwlwifi
* lots of work for multi-link/EHT (wifi7)
* hardware timestamping support for some devices/firwmares
* TX beacon protection on newer hardware
* tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (181 commits)
wifi: clean up erroneously introduced file
wifi: iwlwifi: mvm: correctly use link in iwl_mvm_sta_del()
wifi: iwlwifi: separate AP link management queues
wifi: iwlwifi: mvm: free probe_resp_data later
wifi: iwlwifi: bump FW API to 75 for AX devices
wifi: iwlwifi: mvm: move max_agg_bufsize into host TLC lq_sta
wifi: iwlwifi: mvm: send full STA during HW restart
wifi: iwlwifi: mvm: rework active links counting
wifi: iwlwifi: mvm: update mac config when assigning chanctx
wifi: iwlwifi: mvm: use the correct link queue
wifi: iwlwifi: mvm: clean up mac_id vs. link_id in MLD sta
wifi: iwlwifi: mvm: fix station link data leak
wifi: iwlwifi: mvm: initialize max_rc_amsdu_len per-link
wifi: iwlwifi: mvm: use appropriate link for rate selection
wifi: iwlwifi: mvm: use the new lockdep-checking macros
wifi: iwlwifi: mvm: remove chanctx WARN_ON
wifi: iwlwifi: mvm: avoid sending MAC context for idle
wifi: iwlwifi: mvm: remove only link-specific AP keys
wifi: iwlwifi: mvm: skip inactive links
wifi: iwlwifi: mvm: adjust iwl_mvm_scan_respect_p2p_go_iter() for MLO
...
====================
Link: https://lore.kernel.org/r/20230330205612.921134-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Davide Caratti
|
2384127e98 |
net/sched: act_tunnel_key: add support for "don't fragment"
extend "act_tunnel_key" to allow specifying TUNNEL_DONT_FRAGMENT. Suggested-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu De Beule
|
a25b8b7136 |
netfilter: Correct documentation errors in nf_tables.h
NFTA_RANGE_OP incorrectly says nft_cmp_ops instead of nft_range_ops. NFTA_LOG_GROUP and NFTA_LOG_QTHRESHOLD claim NLA_U32 instead of NLA_U16 NFTA_EXTHDR_SREG isn't documented as a register Signed-off-by: Matthieu De Beule <matthieu.debeule@proton.ch> Signed-off-by: Florian Westphal <fw@strlen.de> |
||
|
Eric Sage
|
28c1b6df43 |
netfilter: nfnetlink_queue: enable classid socket info retrieval
This enables associating a socket with a v1 net_cls cgroup. Useful for applying a per-cgroup policy when processing packets in userspace. Signed-off-by: Eric Sage <eric_sage@apple.com> Signed-off-by: Florian Westphal <fw@strlen.de> |
||
|
Gustavo A. R. Silva
|
00168b415a |
uapi: net: ipv6: Replace fake flex-array with flex-array member
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.
Address the following warning found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
net/ipv6/exthdrs.c: In function ‘fl6_update_dst’:
net/ipv6/exthdrs.c:1393:28: warning: array subscript 0 is outside array bounds of ‘struct in6_addr[0]’ [-Warray-bounds=]
1393 | fl6->daddr = *((struct rt0_hdr *)opt->srcrt)->addr;
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ./include/linux/ipv6.h:5,
from ./include/linux/icmpv6.h:6,
from net/ipv6/exthdrs.c:27:
./include/uapi/linux/ipv6.h:84:33: note: while referencing ‘addr’
84 | struct in6_addr addr[0];
| ^~~~
net/ipv6/exthdrs.c: In function ‘ipv6_push_rthdr0.isra’:
net/ipv6/exthdrs.c:1125:19: warning: array subscript <unknown> is outside array bounds of ‘struct in6_addr[0]’ [-Warray-bounds=]
1125 | phdr->addr[hops - 1] = **addr_p;
| ~~~~~~~~~~^~~~~~~~~~
./include/uapi/linux/ipv6.h:84:33: note: while referencing ‘addr’
84 | struct in6_addr addr[0];
| ^~~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/276
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
||
|
Mike Snitzer
|
06961c487a |
dm: split discards further if target sets max_discard_granularity
The block core (bio_split_discard) will already split discards based on the 'discard_granularity' and 'max_discard_sectors' queue_limits. But the DM thin target also needs to ensure that it doesn't receive a discard that spans a 'max_discard_sectors' boundary. Introduce a dm_target 'max_discard_granularity' flag that if set will cause DM core to split discard bios relative to 'max_discard_sectors'. This treats 'discard_granularity' as a "min_discard_granularity" and 'max_discard_sectors' as a "max_discard_granularity". Requested-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> |
||
|
Marc Zyngier
|
30ec7997d1 |
KVM: arm64: timers: Allow userspace to set the global counter offset
And this is the moment you have all been waiting for: setting the counter offset from userspace. We expose a brand new capability that reports the ability to set the offset for both the virtual and physical sides. In keeping with the architecture, the offset is expressed as a delta that is substracted from the physical counter value. Once this new API is used, there is no going back, and the counters cannot be written to to set the offsets implicitly (the writes are instead ignored). Reviewed-by: Colton Lewis <coltonlewis@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230330174800.2677007-8-maz@kernel.org |
||
|
Kieran Frewen
|
9a8aac92eb |
wifi: nl80211: support advertising S1G capabilities
Include S1G capabilities in netlink band info messages. Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com> Co-developed-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com> Signed-off-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com> Link: https://lore.kernel.org/r/20230223212917.4010246-1-gilad.itzkovitch@virscient.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Daniel Vetter
|
82bbec189a |
Linux 6.3-rc4
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmQgu8QeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG2fAH/0+pSM+u9ZiTCRcc 9cxpHqRu4J16oDJVroxD5c95C8t6pqq8emla7OcPjEbt+2jijEmTVda6i4IpAscc e8c3t4zonzIjxWQxukZ2iPb7rUAsDYjom9Y5NpHB5J4eJMEvrgiDo7MIBtvwECYp SejOpecquUcpFF1JTsDqqUUKgt56A/F/9jNyC/3p31doHbUfQWwTAiEA60gXwjiV DtFFwUlKivLgkTOgigL0MUCrKLpwKXfpBOAbbp5h+zkV/6yjBmkx/OViovsJfrwX kauOPOA/bSLXby4YyHkIB3nUY7mu7KDJfkpy2KMvZkRnJkYYW1Gt3urf714KVo5G dnjfrA8= =q5sO -----END PGP SIGNATURE----- Merge v6.3-rc4 into drm-next I just landed the fence deadline PR from Rob that a bunch of drivers want/need to apply driver-specific patches. Backmerge -rc4 so that they don't have to be stuck on -rc2 for no reason at all. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> |
||
|
Daniel Vetter
|
929ae7c2e3 |
Merge tag 'dma-fence-deadline' of https://gitlab.freedesktop.org/drm/msm into drm-next
This series adds a deadline hint to fences, so realtime deadlines such as vblank can be communicated to the fence signaller for power/ frequency management decisions. This is partially inspired by a trick i915 does, but implemented via dma-fence for a couple of reasons: 1) To continue to be able to use the atomic helpers 2) To support cases where display and gpu are different drivers See https://patchwork.freedesktop.org/series/93035/ This does not yet add any UAPI, although this will be needed in a number of cases: 1) Workloads "ping-ponging" between CPU and GPU, where we don't want the GPU freq governor to interpret time stalled waiting for GPU as "idle" time 2) Cases where the compositor is waiting for fences to be signaled before issuing the atomic ioctl, for example to maintain 60fps cursor updates even when the GPU is not able to maintain that framerate. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt5nDQpa6J86V1oFKPA30YcJzPhAVpmF7N1K1g2N3c=Zg@mail.gmail.com |
||
|
Beau Belgrave
|
a4c40c1349 |
tracing/user_events: Align structs with tabs for readability
Add tabs to make struct members easier to read and unify the style of the code. Link: https://lkml.kernel.org/r/20230328235219.203-13-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Beau Belgrave
|
dcb8177c13 |
tracing/user_events: Add ioctl for disabling addresses
Enablements are now tracked by the lifetime of the task/mm. User processes need to be able to disable their addresses if tracing is requested to be turned off. Before unmapping the page would suffice. However, we now need a stronger contract. Add an ioctl to enable this. A new flag bit is added, freeing, to user_event_enabler to ensure that if the event is attempted to be removed while a fault is being handled that the remove is delayed until after the fault is reattempted. Link: https://lkml.kernel.org/r/20230328235219.203-6-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Beau Belgrave
|
7235759084 |
tracing/user_events: Use remote writes for event enablement
As part of the discussions for user_events aligned with user space tracers, it was determined that user programs should register a aligned value to set or clear a bit when an event becomes enabled. Currently a shared page is being used that requires mmap(). Remove the shared page implementation and move to a user registered address implementation. In this new model during the event registration from user programs 3 new values are specified. The first is the address to update when the event is either enabled or disabled. The second is the bit to set/clear to reflect the event being enabled. The third is the size of the value at the specified address. This allows for a local 32/64-bit value in user programs to support both kernel and user tracers. As an example, setting bit 31 for kernel tracers when the event becomes enabled allows for user tracers to use the other bits for ref counts or other flags. The kernel side updates the bit atomically, user programs need to also update these values atomically. User provided addresses must be aligned on a natural boundary, this allows for single page checking and prevents odd behaviors such as a enable value straddling 2 pages instead of a single page. Currently page faults are only logged, future patches will handle these. Link: https://lkml.kernel.org/r/20230328235219.203-4-beaub@linux.microsoft.com Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Beau Belgrave
|
e5a26a4048 |
tracing/user_events: Split header into uapi and kernel
The UAPI parts need to be split out from the kernel parts of user_events now that other parts of the kernel will reference it. Do so by moving the existing include/linux/user_events.h into include/uapi/linux/user_events.h. Link: https://lkml.kernel.org/r/20230328235219.203-2-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Daniel Starke
|
4ca589661d |
tty: n_gsm: add ioctl for DLC specific parameter configuration
Parameter negotiation has been introduced with
commit
|
||
|
Herbert Xu
|
954d1fa1ac |
macvlan: Add netlink attribute for broadcast cutoff
Make the broadcast cutoff configurable through netlink. Note that macvlan is weird because there is no central device for us to configure (the lowerdev could be anything). So all the options are duplicated over what could be thousands of child devices. IFLA_MACVLAN_BC_QUEUE_LEN took the approach of taking the maximum of all child device settings. This is unnecessary as we could simply store the option in the port device and take the last child device that gets updated as the value to use. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Rob Clark
|
d71c11cc79 |
dma-buf/sync_file: Surface sync-file uABI
We had all of the internal driver APIs, but not the all important
userspace uABI, in the dma-buf doc. Fix that. And re-arrange the
comments slightly as otherwise the comments for the ioctl nr defines
would not show up.
v2: Fix docs build warning coming from newly including the uabi header
in the docs build
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
|
||
|
Shay Agroskin
|
233eb4e786 |
ethtool: Add support for configuring tx_push_buf_len
This attribute, which is part of ethtool's ring param configuration
allows the user to specify the maximum number of the packet's payload
that can be written directly to the device.
Example usage:
# ethtool -G [interface] tx-push-buf-len [number of bytes]
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Gustavo A. R. Silva
|
5c8c74ef20 |
scsi: target: uapi: Replace fake flex-array with flexible-array member
Zero-length arrays as fake flexible arrays are deprecated and we are moving
towards adopting C99 flexible-array members instead.
Address the following warning found with GCC-13 and -fstrict-flex-arrays=3
enabled:
CC drivers/target/target_core_user.o
drivers/target/target_core_user.c: In function ‘queue_cmd_ring’:
drivers/target/target_core_user.c:1096:15: warning: array subscript 0 is outside array bounds of ‘struct iovec[0]’ [-Warray-bounds=]
1096 | iov = &entry->req.iov[0];
| ^~~~~~~~~~~~~~~~~~
In file included from drivers/target/target_core_user.c:31:
./include/uapi/linux/target_core_user.h:122:38: note: while referencing ‘iov’
122 | struct iovec iov[0];
| ^~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help us make progress towards globally enabling
-fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/270
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZBSchMvTdl7VObKI@work
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
||
|
Aloka Dixit
|
dbbb27e183 |
cfg80211: support RNR for EMA AP
As per IEEE Std 802.11ax-2021, 11.1.3.8.3 Discovery of a nontransmitted BSSID profile, an EMA AP that transmits a Beacon frame carrying a partial list of nontransmitted BSSID profiles should include in the frame a Reduced Neighbor Report element carrying information for at least the nontransmitted BSSIDs that are not present in the Multiple BSSID element carried in that frame. Add new nested attribute NL80211_ATTR_EMA_RNR_ELEMS to support the above. Number of RNR elements must be more than or equal to the number of MBSSID elements. This attribute can be used only when EMA is enabled. Userspace is responsible for splitting the RNR into multiple elements such that each element excludes the non-transmitting profiles already included in the MBSSID element (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon will be generated by adding MBSSID and RNR elements at the same index. If the userspace provides more RNR elements than the number of MBSSID elements then these will be added in every EMA beacon. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20230323113801.6903-2-quic_alokad@quicinc.com [Johannes: validate elements] Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Andy Shevchenko
|
1fb1ea0d9c |
mei: Move uuid.h to the MEI namespace
There is only a single user of the UUID uAPI, let's make it part of that user. The way it's done is to prevent compilation time breakage for the user space that does #include <linux/uuid.h> In the future MEI user space tools can switch over to use mei_uuid.h. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230310170747.22782-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Kui-Feng Lee
|
aef56f2e91 |
bpf: Update the struct_ops of a bpf_link.
By improving the BPF_LINK_UPDATE command of bpf(), it should allow you to conveniently switch between different struct_ops on a single bpf_link. This would enable smoother transitions from one struct_ops to another. The struct_ops maps passing along with BPF_LINK_UPDATE should have the BPF_F_LINK flag. Signed-off-by: Kui-Feng Lee <kuifeng@meta.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230323032405.3735486-6-kuifeng@meta.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
|
Kui-Feng Lee
|
68b04864ca |
bpf: Create links for BPF struct_ops maps.
Make bpf_link support struct_ops. Previously, struct_ops were always used alone without any associated links. Upon updating its value, a struct_ops would be activated automatically. Yet other BPF program types required to make a bpf_link with their instances before they could become active. Now, however, you can create an inactive struct_ops, and create a link to activate it later. With bpf_links, struct_ops has a behavior similar to other BPF program types. You can pin/unpin them from their links and the struct_ops will be deactivated when its link is removed while previously need someone to delete the value for it to be deactivated. bpf_links are responsible for registering their associated struct_ops. You can only use a struct_ops that has the BPF_F_LINK flag set to create a bpf_link, while a structs without this flag behaves in the same manner as before and is registered upon updating its value. The BPF_LINK_TYPE_STRUCT_OPS serves a dual purpose. Not only is it used to craft the links for BPF struct_ops programs, but also to create links for BPF struct_ops them-self. Since the links of BPF struct_ops programs are only used to create trampolines internally, they are never seen in other contexts. Thus, they can be reused for struct_ops themself. To maintain a reference to the map supporting this link, we add bpf_struct_ops_link as an additional type. The pointer of the map is RCU and won't be necessary until later in the patchset. Signed-off-by: Kui-Feng Lee <kuifeng@meta.com> Link: https://lore.kernel.org/r/20230323032405.3735486-4-kuifeng@meta.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
|
Ondrej Zary
|
05f0adefd4 |
ata: parport_pc: add 16-bit and 8-bit fast EPP transfer flags
PARPORT_EPP_FAST flag currently uses 32-bit I/O port access for data read/write (insl/outsl). Add PARPORT_EPP_FAST_16 and PARPORT_EPP_FAST_8 that use insw/outsw and insb/outsb (and PARPORT_EPP_FAST_32 as alias for PARPORT_EPP_FAST). Signed-off-by: Ondrej Zary <linux@zary.sk> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> |
||
|
Manikanta Pubbisetty
|
8e40c3b6e1 |
wifi: nl80211: Update the documentation of NL80211_SCAN_FLAG_COLOCATED_6GHZ
Currently when NL80211_SCAN_FLAG_COLOCATED_6GHZ is set in the scan flags, in addition to the co-located APs, PSC channels in the 6 GHz band would also be scanned if the user space has asked for it. In other words, the scan would happen on PSC channels & co-located 6 GHz channels that were reported in the RNR IE. Update the documentation of NL80211_SCAN_FLAG_COLOCATED_6GHZ flag to reflect the above said behavior. Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Link: https://lore.kernel.org/r/20230308104556.9399-1-quic_mpubbise@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Dionna Glaze
|
0144e3b85d |
x86/sev: Change snp_guest_issue_request()'s fw_err argument
The GHCB specification declares that the firmware error value for a guest request will be stored in the lower 32 bits of EXIT_INFO_2. The upper 32 bits are for the VMM's own error code. The fw_err argument to snp_guest_issue_request() is thus a misnomer, and callers will need access to all 64 bits. The type of unsigned long also causes problems, since sw_exit_info2 is u64 (unsigned long long) vs the argument's unsigned long*. Change this type for issuing the guest request. Pass the ioctl command struct's error field directly instead of in a local variable, since an incomplete guest request may not set the error code, and uninitialized stack memory would be written back to user space. The firmware might not even be called, so bookend the call with the no firmware call error and clear the error. Since the "fw_err" field is really exitinfo2 split into the upper bits' vmm error code and lower bits' firmware error code, convert the 64 bit value to a union. [ bp: - Massage commit message - adjust code - Fix a build issue as Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303070609.vX6wp2Af-lkp@intel.com - print exitinfo2 in hex Tom: - Correct -EIO exit case. ] Signed-off-by: Dionna Glaze <dionnaglaze@google.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230214164638.1189804-5-dionnaglaze@google.com Link: https://lore.kernel.org/r/20230307192449.24732-12-bp@alien8.de |
||
|
Peter Gonda
|
efb339a833 |
crypto: ccp - Name -1 return value as SEV_RET_NO_FW_CALL
The PSP can return a "firmware error" code of -1 in circumstances where the PSP has not actually been called. To make this protocol unambiguous, name the value SEV_RET_NO_FW_CALL. [ bp: Massage a bit. ] Signed-off-by: Peter Gonda <pgonda@google.com> Signed-off-by: Dionna Glaze <dionnaglaze@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20221207010210.2563293-2-dionnaglaze@google.com |
||
|
Greg Kroah-Hartman
|
abae262640 |
Merge 6.3-rc3 into char-misc-next
We need the mainline fixes in this branch for testing and other subsystem changes to be based properly on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Dave Airlie
|
90031bc33f |
Merge tag 'amd-drm-next-6.4-2023-03-17' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.4-2023-03-17: amdgpu: - Misc code cleanups - Documentation fixes - Make kobj structures const - Add thermal throttling adjustments for supported APUs - UMC RAS fixes - Display reset fixes - DCN 3.2 fixes - Freesync fixes - DC code reorg - Generalize dmabuf import to work with KFD - DC DML fixes - SRIOV fixes - UVD code cleanups - IH 4.4.2 updates - HDP 4.4.2 updates - SDMA 4.4.2 updates - PSP 13.0.6 updates - Add capped/uncapped workload handling for supported APUs - DCN 3.1.4 updates - Re-org DC Kconfig - USB4 fixes - Reorg DC plane and stream handling - Register vga_switcheroo for apple-gmux - SMU 13.0.6 updates - Fix error checking in read_mm_registers functions for affected families - VCN 4.0.4 fix - Drop redundant pci_enable_pcie_error_reporting() call - RDNA2 SMU OD suspend/resume fix - Expose additional memory stats via fdinfo - RAS fixes - Misc display fixes - DP MST fixes - IOMMU regression fix for KFD amdkfd: - Make kobj structures const - Support for exporting buffers via dmabuf - Multi-VMA page migration fixes - NBIO fixes - Misc code cleanups - Fix possible double free - Fix possible UAF radeon: - iMac fix UAPI: - KFD dmabuf export support. Required for importing KFD buffers into GEM contexts and for RDMA P2P support. Proposed user mode changes: https://github.com/fxkamd/ROCT-Thunk-Interface/commits/fxkamd/dmabuf From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230317164416.138340-1-alexander.deucher@amd.com |
||
|
Hans Verkuil
|
fc650d2eba |
media: videodev.h: drop V4L2_FBUF_CAP_LIST/BITMAP_CLIPPING
These two capabilities are no longer supported, so no longer define them when compiling the kernel. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Jakub Kicinski
|
1118aa4c70 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
net/wireless/nl80211.c |
||
|
Linus Torvalds
|
478a351ce0 |
Including fixes from netfilter, wifi and ipsec.
Current release - regressions:
- phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()
- virtio: vsock: don't use skbuff state to account credit
- virtio: vsock: don't drop skbuff on copy failure
- virtio_net: fix page_to_skb() miscalculating the memory size
Current release - new code bugs:
- eth: correct xdp_features after device reconfig
- wifi: nl80211: fix the puncturing bitmap policy
- net/mlx5e: flower:
- fix raw counter initialization
- fix missing error code
- fix cloned flow attribute
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context,
don't assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave
Ethertype change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5/YI
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi and ipsec.
A little more changes than usual, but it's pretty normal for us that
the rc3/rc4 PRs are oversized as people start testing in earnest.
Possibly an extra boost from people deploying the 6.1 LTS but that's
more of an unscientific hunch.
Current release - regressions:
- phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()
- virtio: vsock: don't use skbuff state to account credit
- virtio: vsock: don't drop skbuff on copy failure
- virtio_net: fix page_to_skb() miscalculating the memory size
Current release - new code bugs:
- eth: correct xdp_features after device reconfig
- wifi: nl80211: fix the puncturing bitmap policy
- net/mlx5e: flower:
- fix raw counter initialization
- fix missing error code
- fix cloned flow attribute
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context, don't
assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype
change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action"
* tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
selftests: bonding: add tests for ether type changes
bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
net: renesas: rswitch: Fix GWTSDIE register handling
net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
ethernet: sun: add check for the mdesc_grab()
net: ipa: fix some register validity checks
net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
net: ipa: add two missing declarations
net: ipa: reg: include <linux/bug.h>
net: xdp: don't call notifiers during driver init
net/sched: act_api: add specific EXT_WARN_MSG for tc action
Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
ynl: make the tooling check the license
ynl: broaden the license even more
tools: ynl: make definitions optional again
hsr: ratelimit only when errors are printed
qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
selftests: net: devlink_port_split.py: skip test if no suitable device available
...
|
||
|
Ido Schimmel
|
a3a48de5ea |
vxlan: mdb: Add MDB control path support
Implement MDB control path support, enabling the creation, deletion, replacement and dumping of MDB entries in a similar fashion to the bridge driver. Unlike the bridge driver, each entry stores a list of remote VTEPs to which matched packets need to be replicated to and not a list of bridge ports. The motivating use case is the installation of MDB entries by a user space control plane in response to received EVPN routes. As such, only allow permanent MDB entries to be installed and do not implement snooping functionality, avoiding a lot of unnecessary complexity. Since entries can only be modified by user space under RTNL, use RTNL as the write lock. Use RCU to ensure that MDB entries and remotes are not freed while being accessed from the data path during transmission. In terms of uAPI, reuse the existing MDB netlink interface, but add a few new attributes to request and response messages: * IP address of the destination VXLAN tunnel endpoint where the multicast receivers reside. * UDP destination port number to use to connect to the remote VXLAN tunnel endpoint. * VXLAN VNI Network Identifier to use to connect to the remote VXLAN tunnel endpoint. Required when Ingress Replication (IR) is used and the remote VTEP is not a member of originating broadcast domain (VLAN/VNI) [1]. * Source VNI Network Identifier the MDB entry belongs to. Used only when the VXLAN device is in external mode. * Interface index of the outgoing interface to reach the remote VXLAN tunnel endpoint. This is required when the underlay destination IP is multicast (P2MP), as the multicast routing tables are not consulted. All the new attributes are added under the 'MDBA_SET_ENTRY_ATTRS' nest which is strictly validated by the bridge driver, thereby automatically rejecting the new attributes. [1] https://datatracker.ietf.org/doc/html/draft-ietf-bess-evpn-irb-mcast#section-3.2.2 Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Hangbin Liu
|
2f59823fe6 |
net/sched: act_api: add specific EXT_WARN_MSG for tc action
In my previous commit |
||
|
Jakub Kicinski
|
4e16b6a748 |
ynl: broaden the license even more
I relicensed Netlink spec code to GPL-2.0 OR BSD-3-Clause but
we still put a slightly different license on the uAPI header
than the rest of the code. Use the Linux-syscall-note on all
the specs and all generated code. It's moot for kernel code,
but should not hurt. This way the licenses match everywhere.
Cc: Chuck Lever <chuck.lever@oracle.com>
Fixes:
|
||
|
Thomas Huth
|
c5edd753a0 |
KVM: x86: Remove the KVM_GET_NR_MMU_PAGES ioctl
The KVM_GET_NR_MMU_PAGES ioctl is quite questionable on 64-bit hosts since it fails to return the full 64 bits of the value that can be set with the corresponding KVM_SET_NR_MMU_PAGES call. Its "long" return value is truncated into an "int" in the kvm_arch_vm_ioctl() function. Since this ioctl also never has been used by userspace applications (QEMU, Google's internal VMM, kvmtool and CrosVM have been checked), it's likely the best if we remove this badly designed ioctl before anybody really tries to use it. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230208140105.655814-4-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Srinivas Pandruvada
|
f8e0077a9d |
platform/x86: ISST: Add SST-TF support via TPMI
The support of Intel Speed Select Technology - Turbo Frequency (SST-TF) feature enables the ability to set different “All core turbo ratio limits” to cores based on the priority. By using this feature, some cores can be configured to get higher turbo frequency by designating them as high priority at the cost of lower or no turbo frequency on the low priority cores. One new IOCTLs are added: ISST_IF_GET_TURBO_FREQ_INFO : Get information about turbo frequency buckets Once an instance is identified, read or write from correct MMIO offset for a given field as defined in the specification. For details on SST-TF operations using intel-speed-selet utility, refer to: Documentation/admin-guide/pm/intel-speed-select.rst under the kernel documentation Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Pragya Tanwar <pragya.tanwar@intel.com> Link: https://lore.kernel.org/r/20230308070642.1727167-8-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Srinivas Pandruvada
|
ea009e4769 |
platform/x86: ISST: Add SST-PP support via TPMI
This Intel Speed Select Technology - Performance Profile (SST-PP) feature introduces a mechanism that allows multiple optimized performance profiles per system. Each profile defines a set of CPUs that need to be online and rest offline to sustain a guaranteed base frequency. Five new IOCTLs are added: ISST_IF_PERF_LEVELS : Get number of performance levels ISST_IF_PERF_SET_LEVEL : Set to a new performance level ISST_IF_PERF_SET_FEATURE : Activate SST-BF/SST-TF for a performance level ISST_IF_GET_PERF_LEVEL_INFO : Get parameters for a performance level ISST_IF_GET_PERF_LEVEL_CPU_MASK : Get CPU mask for a performance level Once an instance is identified, read or write from correct MMIO offset for a given field as defined in the specification. For details on SST PP operations using intel-speed-selet utility, refer to: Documentation/admin-guide/pm/intel-speed-select.rst under the kernel documentation Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Pragya Tanwar <pragya.tanwar@intel.com> Link: https://lore.kernel.org/r/20230308070642.1727167-6-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Srinivas Pandruvada
|
12a7d2cb81 |
platform/x86: ISST: Add SST-CP support via TPMI
Intel Speed Select Technology Core Power (SST-CP) is an interface that allows users to define per core priority. This defines a mechanism to distribute power among cores when there is a power constrained scenario. This defines a class of service (CLOS) configuration. Three new IOCTLs are added: ISST_IF_CORE_POWER_STATE : Enable/Disable SST-CP ISST_IF_CLOS_PARAM : Configure CLOS parameters ISST_IF_CLOS_ASSOC : Associate CPUs to a CLOS To associate CPUs to CLOS, either Linux CPU numbering or PUNIT numbering scheme can be used, using parameter punit_cpu_map (1: for PUNIT numbering 0 for Linux CPU number). There is no change to IOCTL to get PUNIT CPU number for a CPU. Introduce get_instance() function, which is used by majority of IOCTLs processing to convert a socket and power domain to tpmi_per_power_domain_info * instance. This instance has all the MMIO offsets stored to read a particular field. Once an instance is identified, read or write from correct MMIO offset for a given field as defined in the specification. For details on SST CP operations using intel-speed-selet utility, refer to: Documentation/admin-guide/pm/intel-speed-select.rst under the kernel documentation Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Pragya Tanwar <pragya.tanwar@intel.com> Link: https://lore.kernel.org/r/20230308070642.1727167-5-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Srinivas Pandruvada
|
d805456c71 |
platform/x86: ISST: Enumerate TPMI SST and create framework
Enumerate TPMI SST driver and create basic framework to add more features. The basic user space interface is still same as the legacy using /dev/isst_interface. Users of "intel-speed-select" utility should be able to use same commands as prior gens without being aware of new underlying hardware interface. TPMI SST driver enumerates on device "intel_vsec.tpmi-sst". Since there can be multiple instances and there is one common SST core, split implementation into two parts: A common core part and an enumeration part. The enumeration driver is loaded for each device instance and register with the TPMI SST core driver. On very first enumeration the TPMI SST core driver register with SST core driver to get IOCTL callbacks. The api_version is incremented for IOCTL ISST_IF_GET_PLATFORM_INFO, so that user space can issue new IOCTLs. Each TPMI package contains multiple power domains. Each power domain has its own set of SST controls. For each domain map the MMIO memory and update per domain struct tpmi_per_power_domain_info. This information will be used to implement other SST interfaces. Implement first IOCTL commands to get number of TPMI SST instances and instance mask as some of the power domains may not have any SST controls. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Pragya Tanwar <pragya.tanwar@intel.com> Link: https://lore.kernel.org/r/20230308070642.1727167-3-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Ross Zwisler
|
27d7fdf06f |
bpf: use canonical ftrace path
The canonical location for the tracefs filesystem is at /sys/kernel/tracing. But, from Documentation/trace/ftrace.rst: Before 4.1, all ftrace tracing control files were within the debugfs file system, which is typically located at /sys/kernel/debug/tracing. For backward compatibility, when mounting the debugfs file system, the tracefs file system will be automatically mounted at: /sys/kernel/debug/tracing Many comments and samples in the bpf code still refer to this older debugfs path, so let's update them to avoid confusion. There are a few spots where the bpf code explicitly checks both tracefs and debugfs (tools/bpf/bpftool/tracelog.c and tools/lib/api/fs/fs.c) and I've left those alone so that the tools can continue to work with both paths. Signed-off-by: Ross Zwisler <zwisler@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20230313205628.1058720-2-zwisler@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jiri Pirko
|
be50da3e9d |
net: virtio_net: implement exact header length guest feature
Virtio spec introduced a feature VIRTIO_NET_F_GUEST_HDRLEN which when set implicates that device benefits from knowing the exact size of the header. For compatibility, to signal to the device that the header is reliable driver also needs to set this feature. Without this feature set by driver, device has to figure out the header size itself. Quoting the original virtio spec: "hdr_len is a hint to the device as to how much of the header needs to be kept to copy into each packet" "a hint" might not be clear for the reader what does it mean, if it is "maybe like that" of "exactly like that". This feature just makes it crystal clear and let the device count on the hdr_len being filled up by the exact length of header. Also note the spec already has following note about hdr_len: "Due to various bugs in implementations, this field is not useful as a guarantee of the transport header size." Without this feature the device needs to parse the header in core data path handling. Accurate information helps the device to eliminate such header parsing and directly use the hardware accelerators for GSO operation. virtio_net_hdr_from_skb() fills up hdr_len to skb_headlen(skb). The driver already complies to fill the correct value. Introduce the feature and advertise it. Note that virtio spec also includes following note for device implementation: "Caution should be taken by the implementation so as to prevent a malicious driver from attacking the device by setting an incorrect hdr_len." There is a plan to support this feature in our emulated device. A device of SolidRun offers this feature bit. They claim this feature will save the device a few cycles for every GSO packet. Link: https://docs.oasis-open.org/virtio/virtio/v1.2/cs01/virtio-v1.2-cs01.html#x1-230006x3 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230309094559.917857-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Lorenzo Bianconi
|
f85949f982 |
xdp: add xdp_set_features_flag utility routine
Introduce xdp_set_features_flag utility routine in order to update dynamically xdp_features according to the dynamic hw configuration via ethtool (e.g. changing number of hw rx/tx queues). Add xdp_clear_features_flag() in order to clear all xdp_feature flag. Reviewed-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
2af560e5a5 |
wireless-next patches for 6.4
Major changes:
cfg80211
* 6 GHz improvements
* HW timestamping support
* support for randomized auth/deauth TA for PASN privacy
(also for mac80211)
mac80211
* radiotap TLV and EHT support for the iwlwifi sniffer
* HW timestamping support
* per-link debugfs for multi-link
brcmfmac
* support for Apple (M1 Pro/Max) devices
iwlwifi
* support for a few new devices
* EHT sniffer support
rtw88
* better support for some SDIO devices
(e.g. MAC address from efuse)
rtw89
* HW scan support for 8852b
* better support for 6 GHz scanning
-----BEGIN PGP SIGNATURE-----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=sPir
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless-next patches for 6.4
Major changes:
cfg80211
* 6 GHz improvements
* HW timestamping support
* support for randomized auth/deauth TA for PASN privacy
(also for mac80211)
mac80211
* radiotap TLV and EHT support for the iwlwifi sniffer
* HW timestamping support
* per-link debugfs for multi-link
brcmfmac
* support for Apple (M1 Pro/Max) devices
iwlwifi
* support for a few new devices
* EHT sniffer support
rtw88
* better support for some SDIO devices
(e.g. MAC address from efuse)
rtw89
* HW scan support for 8852b
* better support for 6 GHz scanning
* tag 'wireless-next-2023-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (84 commits)
wifi: iwlwifi: mvm: fix EOF bit reporting
wifi: iwlwifi: Do not include radiotap EHT user info if not needed
wifi: iwlwifi: mvm: add EHT RU allocation to radiotap
wifi: iwlwifi: Update logs for yoyo reset sw changes
wifi: iwlwifi: mvm: clean up duplicated defines
wifi: iwlwifi: rs-fw: break out for unsupported bandwidth
wifi: iwlwifi: Add support for B step of BnJ-Fm4
wifi: iwlwifi: mvm: make flush code a bit clearer
wifi: iwlwifi: mvm: avoid UB shift of snif_queue
wifi: iwlwifi: mvm: add primary 80 known for EHT radiotap
wifi: iwlwifi: mvm: parse FW frame metadata for EHT sniffer mode
wifi: iwlwifi: mvm: decode USIG_B1_B7 RU to nl80211 RU width
wifi: iwlwifi: mvm: rename define to generic name
wifi: iwlwifi: mvm: allow Microsoft to use TAS
wifi: iwlwifi: mvm: add all EHT based on data0 info from HW
wifi: iwlwifi: mvm: add EHT radiotap info based on rate_n_flags
wifi: iwlwifi: mvm: add an helper function radiotap TLVs
wifi: radiotap: separate vendor TLV into header/content
wifi: iwlwifi: reduce verbosity of some logging events
wifi: iwlwifi: Adding the code to get RF name for MsP device
...
====================
Link: https://lore.kernel.org/r/20230310120159.36518-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Thomas Huth
|
f5bdc61eb6 |
pktcdvd: Remove CONFIG_CDROM_PKTCDVD_WCACHE from uapi header
CONFIG_* switches should not be exposed in uapi headers, thus let's get rid of the USE_WCACHING macro here (which was also named way to generic) and integrate the logic directly in the only function that needs it. Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Palmer Dabbelt
|
d3c7ec7588 |
Move bp_type_idx to include/linux/hw_breakpoint.h
This has a "#ifdef CONFIG_*" that used to be exposed to userspace. The names in here are so generic that I don't think it's a good idea to expose them to userspace (or even the rest of the kernel). There are multiple in-kernel users, so it's been moved to a kernel header file. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> Reviewed-by: Andrew Waterman <waterman@eecs.berkeley.edu> Reviewed-by: Albert Ou <aou@eecs.berkeley.edu> Message-Id: <1447119071-19392-10-git-send-email-palmer@dabbelt.com> [thuth: Remove it also from tools/include/uapi/linux/hw_breakpoint.h] Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Palmer Dabbelt
|
063f3ed9fa |
Move ep_take_care_of_epollwakeup() to fs/eventpoll.c
This doesn't make any sense to expose to userspace, so it's been moved
to the one user. This was introduced by commit
|
||
|
Palmer Dabbelt
|
5fe5a7586c |
Move COMPAT_ATM_ADDPARTY to net/atm/svc.c
This used to be behind an #ifdef COMPAT_COMPAT, so most of userspace wouldn't have seen the definition before. Unfortunately this header file became visible to userspace, so the definition has instead been moved to net/atm/svc.c (the only user). Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> Reviewed-by: Andrew Waterman <waterman@eecs.berkeley.edu> Reviewed-by: Albert Ou <aou@eecs.berkeley.edu> Message-Id: <1447119071-19392-4-git-send-email-palmer@dabbelt.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Torvalds
|
ae195ca1a8 |
for-6.3-rc1-tag
-----BEGIN PGP SIGNATURE-----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=rJlY
-----END PGP SIGNATURE-----
Merge tag 'for-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"First batch of fixes. Among them there are two updates to sysfs and
ioctl which are not strictly fixes but are used for testing so there's
no reason to delay them.
- fix block group item corruption after inserting new block group
- fix extent map logging bit not cleared for split maps after
dropping range
- fix calculation of unusable block group space reporting bogus
values due to 32/64b division
- fix unnecessary increment of read error stat on write error
- improve error handling in inode update
- export per-device fsid in DEV_INFO ioctl to distinguish seeding
devices, needed for testing
- allocator size classes:
- fix potential dead lock in size class loading logic
- print sysfs stats for the allocation classes"
* tag 'for-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix block group item corruption after inserting new block group
btrfs: fix extent map logging bit not cleared for split maps after dropping range
btrfs: fix percent calculation for bg reclaim message
btrfs: fix unnecessary increment of read error stat on write error
btrfs: handle btrfs_del_item errors in __btrfs_update_delayed_inode
btrfs: ioctl: return device fsid from DEV_INFO ioctl
btrfs: fix potential dead lock in size class loading logic
btrfs: sysfs: add size class stats
|
||
|
Jakub Kicinski
|
d0928c1c5b |
Merge branch 'main' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says: ==================== Netfilter updates for net-next 1. nf_tables 'brouting' support, from Sriram Yagnaraman. 2. Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header, from Xin Long. This comes with a test BIG TCP test case, added to tools/testing/selftests/net/. 3. Fix spelling and indentation in conntrack, from Jeremy Sowden. * 'main' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nat: fix indentation of function arguments netfilter: conntrack: fix typo selftests: add a selftest for big tcp netfilter: use nf_ip6_check_hbh_len in nf_ct_skb_network_trim netfilter: move br_nf_check_hbh_len to utils netfilter: bridge: move pskb_trim_rcsum out of br_nf_check_hbh_len netfilter: bridge: check len before accessing more nh data netfilter: bridge: call pskb_may_pull in br_nf_check_hbh_len netfilter: bridge: introduce broute meta statement ==================== Link: https://lore.kernel.org/r/20230308193033.13965-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
d0ddf5065f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Documentation/bpf/bpf_devel_QA.rst |
||
|
Michael Weiß
|
5a70f4a630 |
bpf: Fix a typo for BPF_F_ANY_ALIGNMENT in bpf.h
Fix s/BPF_PROF_LOAD/BPF_PROG_LOAD/ typo in the documentation comment for BPF_F_ANY_ALIGNMENT in bpf.h. Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230309133823.944097-1-michael.weiss@aisec.fraunhofer.de |
||
|
Linus Torvalds
|
44889ba56c |
Networking fixes for 6.3-rc2, including fixes from netfilter, bpf
Current release - regressions:
- core: avoid skb end_offset change in __skb_unclone_keeptruesize()
- sched:
- act_connmark: handle errno on tcf_idr_check_alloc
- flower: fix fl_change() error recovery path
- ieee802154: prevent user from crashing the host
Current release - new code bugs:
- eth: bnxt_en: fix the double free during device removal
- tools: ynl:
- fix enum-as-flags in the generic CLI
- fully inherit attrs in subsets
- re-license uniformly under GPL-2.0 or BSD-3-clause
Previous releases - regressions:
- core: use indirect calls helpers for sk_exit_memory_pressure()
- tls:
- fix return value for async crypto
- avoid hanging tasks on the tx_lock
- eth: ice: copy last block omitted in ice_get_module_eeprom()
Previous releases - always broken:
- core: avoid double iput when sock_alloc_file fails
- af_unix: fix struct pid leaks in OOB support
- tls:
- fix possible race condition
- fix device-offloaded sendpage straddling records
- bpf:
- sockmap: fix an infinite loop error
- test_run: fix &xdp_frame misplacement for LIVE_FRAMES
- fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR
- netfilter: tproxy: fix deadlock due to missing BH disable
- phylib: get rid of unnecessary locking
- eth: bgmac: fix *initial* chip reset to support BCM5358
- eth: nfp: fix csum for ipsec offload
- eth: mtk_eth_soc: fix RX data corruption issue
Misc:
- usb: qmi_wwan: add telit 0x1080 composition
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hSXM
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
Current release - regressions:
- core: avoid skb end_offset change in __skb_unclone_keeptruesize()
- sched:
- act_connmark: handle errno on tcf_idr_check_alloc
- flower: fix fl_change() error recovery path
- ieee802154: prevent user from crashing the host
Current release - new code bugs:
- eth: bnxt_en: fix the double free during device removal
- tools: ynl:
- fix enum-as-flags in the generic CLI
- fully inherit attrs in subsets
- re-license uniformly under GPL-2.0 or BSD-3-clause
Previous releases - regressions:
- core: use indirect calls helpers for sk_exit_memory_pressure()
- tls:
- fix return value for async crypto
- avoid hanging tasks on the tx_lock
- eth: ice: copy last block omitted in ice_get_module_eeprom()
Previous releases - always broken:
- core: avoid double iput when sock_alloc_file fails
- af_unix: fix struct pid leaks in OOB support
- tls:
- fix possible race condition
- fix device-offloaded sendpage straddling records
- bpf:
- sockmap: fix an infinite loop error
- test_run: fix &xdp_frame misplacement for LIVE_FRAMES
- fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR
- netfilter: tproxy: fix deadlock due to missing BH disable
- phylib: get rid of unnecessary locking
- eth: bgmac: fix *initial* chip reset to support BCM5358
- eth: nfp: fix csum for ipsec offload
- eth: mtk_eth_soc: fix RX data corruption issue
Misc:
- usb: qmi_wwan: add telit 0x1080 composition"
* tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
tools: ynl: fix enum-as-flags in the generic CLI
tools: ynl: move the enum classes to shared code
net: avoid double iput when sock_alloc_file fails
af_unix: fix struct pid leaks in OOB support
eth: fealnx: bring back this old driver
net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC
net: microchip: sparx5: fix deletion of existing DSCP mappings
octeontx2-af: Unlock contexts in the queue context cache in case of fault detection
net/smc: fix fallback failed while sendmsg with fastopen
ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause
mailmap: update entries for Stephen Hemminger
mailmap: add entry for Maxim Mikityanskiy
nfc: change order inside nfc_se_io error path
ethernet: ice: avoid gcc-9 integer overflow warning
ice: don't ignore return codes in VSI related code
ice: Fix DSCP PFC TLV creation
net: usb: qmi_wwan: add Telit 0x1080 composition
net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990
netfilter: conntrack: adopt safer max chain length
net: tls: fix device-offloaded sendpage straddling records
...
|
||
|
Jiri Slaby
|
9b12f050c7 |
char: pcmcia: remove all the drivers
These char PCMCIA drivers are buggy[1] and receive only minimal care. It was concluded[2], that we should try to remove most pcmcia drivers completely. Let's start with these char broken one. Note that I also removed a UAPI header: include/uapi/linux/cm4000_cs.h. I found only coccinelle tests mentioning some ioctl constants from that file. But they are not actually used. Anyway, should someone complain, we may reintroduce the header (or its parts). [1] https://lore.kernel.org/all/f41c2765-80e0-48bc-b1e4-8cfd3230fd4a@www.fastmail.com/ [2] https://lore.kernel.org/all/c5b39544-a4fb-4796-a046-0b9be9853787@app.fastmail.com/ Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: "Hyunwoo Kim" <imv4bel@gmail.com> Cc: Harald Welte <laforge@gnumonks.org> Cc: Lubomir Rintel <lkundrak@v3.sk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230222092302.6348-2-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Xin Long
|
42d452e770 |
sctp: add weighted fair queueing stream scheduler
As it says in rfc8260#section-3.6 about the weighted fair queueing scheduler: A Weighted Fair Queueing scheduler between the streams is used. The weight is configurable per outgoing SCTP stream. This scheduler considers the lengths of the messages of each stream and schedules them in a specific way to use the capacity according to the given weights. If the weight of stream S1 is n times the weight of stream S2, the scheduler should assign to stream S1 n times the capacity it assigns to stream S2. The details are implementation dependent. Interleaving user messages allows for a better realization of the capacity usage according to the given weights. This patch adds Weighted Fair Queueing Scheduler actually based on the code of Fair Capacity Scheduler by adding fc_weight into struct sctp_stream_out_ext and taking it into account when sorting stream-> fc_list in sctp_sched_fc_sched() and sctp_sched_fc_dequeue_done(). Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Xin Long
|
4821a076eb |
sctp: add fair capacity stream scheduler
As it says in rfc8260#section-3.5 about the fair capacity scheduler:
A fair capacity distribution between the streams is used. This
scheduler considers the lengths of the messages of each stream and
schedules them in a specific way to maintain an equal capacity for
all streams. The details are implementation dependent. interleaving
user messages allows for a better realization of the fair capacity
usage.
This patch adds Fair Capacity Scheduler based on the foundations added
by commit
|
||
|
Andrii Nakryiko
|
6018e1f407 |
bpf: implement numbers iterator
Implement the first open-coded iterator type over a range of integers.
It's public API consists of:
- bpf_iter_num_new() constructor, which accepts [start, end) range
(that is, start is inclusive, end is exclusive).
- bpf_iter_num_next() which will keep returning read-only pointer to int
until the range is exhausted, at which point NULL will be returned.
If bpf_iter_num_next() is kept calling after this, NULL will be
persistently returned.
- bpf_iter_num_destroy() destructor, which needs to be called at some
point to clean up iterator state. BPF verifier enforces that iterator
destructor is called at some point before BPF program exits.
Note that `start = end = X` is a valid combination to setup an empty
iterator. bpf_iter_num_new() will return 0 (success) for any such
combination.
If bpf_iter_num_new() detects invalid combination of input arguments, it
returns error, resets iterator state to, effectively, empty iterator, so
any subsequent call to bpf_iter_num_next() will keep returning NULL.
BPF verifier has no knowledge that returned integers are in the
[start, end) value range, as both `start` and `end` are not statically
known and enforced: they are runtime values.
While the implementation is pretty trivial, some care needs to be taken
to avoid overflows and underflows. Subsequent selftests will validate
correctness of [start, end) semantics, especially around extremes
(INT_MIN and INT_MAX).
Similarly to bpf_loop(), we enforce that no more than BPF_MAX_LOOPS can
be specified.
bpf_iter_num_{new,next,destroy}() is a logical evolution from bounded
BPF loops and bpf_loop() helper and is the basis for implementing
ergonomic BPF loops with no statically known or verified bounds.
Subsequent patches implement bpf_for() macro, demonstrating how this can
be wrapped into something that works and feels like a normal for() loop
in C language.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Sriram Yagnaraman
|
4386b92185 |
netfilter: bridge: introduce broute meta statement
nftables equivalent for ebtables -t broute. Implement broute meta statement to set br_netfilter_broute flag in skb to force a packet to be routed instead of being bridged. Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Florian Westphal <fw@strlen.de> |
||
|
Jakub Kicinski
|
37d9df224d |
ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause
I was intending to make all the Netlink Spec code BSD-3-Clause to ease the adoption but it appears that: - I fumbled the uAPI and used "GPL WITH uAPI note" there - it gives people pause as they expect GPL in the kernel As suggested by Chuck re-license under dual. This gives us benefit of full BSD freedom while fulfilling the broad "kernel is under GPL" expectations. Link: https://lore.kernel.org/all/20230304120108.05dd44c5@kernel.org/ Link: https://lore.kernel.org/r/20230306200457.3903854-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Veerendranath Jakkam
|
6933486133 |
wifi: nl80211: Add support for randomizing TA of auth and deauth frames
Add support to use a random local address in authentication and deauthentication frames sent to unassociated peer when the driver supports. The driver needs to configure receive behavior to accept frames with random transmit address specified in TX path authentication frames during the time of the frame exchange is pending and such frames need to be acknowledged similarly to frames sent to the local permanent address when this random address functionality is used. This capability allows use of randomized transmit address for PASN authentication frames to improve privacy of WLAN clients. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230112012415.167556-2-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Avraham Stern
|
cbbaf2bb82 |
wifi: nl80211: add a command to enable/disable HW timestamping
Add a command to enable and disable HW timestamping of TM and FTM frames. HW timestamping can be enabled for a specific mac address or for all addresses. The low level driver will indicate how many peers HW timestamping can be enabled concurrently, and this information will be passed to userspace. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.05678d7b1c17.Iccc08869ea8156f1c71a3111a47f86dd56234bd0@changeid [switch to needing netdev UP, minor edits] Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Ilan Peer
|
d509c55cda |
wifi: nl80211: Update the documentation of NL80211_SCAN_FLAG_COLOCATED_6GHZ
Add a detailed description of NL80211_SCAN_FLAG_COLOCATED_6GHZ flag. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.487ab04feb39.I5129fd61841332474693046241586f057b134c3c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Jakub Kicinski
|
36e5e391a2 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZAZsBwAKCRDbK58LschI g3W1AQCQnO6pqqX5Q2aYDAZPlZRtV2TRLjuqrQE0dHW/XLAbBgD/bgsAmiKhPSCG 2mTt6izpTQVlZB0e8KcDIvbYd9CE3Qc= =EjJQ -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-03-06 We've added 85 non-merge commits during the last 13 day(s) which contain a total of 131 files changed, 7102 insertions(+), 1792 deletions(-). The main changes are: 1) Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses, from Joanne Koong. 2) Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities, from Andrii Nakryiko. 3) Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc, from Alexei Starovoitov. 4) Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps, from Kumar Kartikeya Dwivedi. 5) Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them, from Eduard Zingerman. 6) Make uprobe attachment Android APK aware by supporting attachment to functions inside ELF objects contained in APKs via function names, from Daniel Müller. 7) Add a new flag BPF_F_TIMER_ABS flag for bpf_timer_start() helper to start the timer with absolute expiration value instead of relative one, from Tero Kristo. 8) Add a new kfunc bpf_cgroup_from_id() to look up cgroups via id, from Tejun Heo. 9) Extend libbpf to support users manually attaching kprobes/uprobes in the legacy/perf/link mode, from Menglong Dong. 10) Implement workarounds in the mips BPF JIT for DADDI/R4000, from Jiaxun Yang. 11) Enable mixing bpf2bpf and tailcalls for the loongarch BPF JIT, from Hengqi Chen. 12) Extend BPF instruction set doc with describing the encoding of BPF instructions in terms of how bytes are stored under big/little endian, from Jose E. Marchesi. 13) Follow-up to enable kfunc support for riscv BPF JIT, from Pu Lehui. 14) Fix bpf_xdp_query() backwards compatibility on old kernels, from Yonghong Song. 15) Fix BPF selftest cross compilation with CLANG_CROSS_FLAGS, from Florent Revest. 16) Improve bpf_cpumask_ma to only allocate one bpf_mem_cache, from Hou Tao. 17) Fix BPF verifier's check_subprogs to not unnecessarily mark a subprogram with has_tail_call, from Ilya Leoshkevich. 18) Fix arm syscall regs spec in libbpf's bpf_tracing.h, from Puranjay Mohan. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits) selftests/bpf: Add test for legacy/perf kprobe/uprobe attach mode selftests/bpf: Split test_attach_probe into multi subtests libbpf: Add support to set kprobe/uprobe attach mode tools/resolve_btfids: Add /libsubcmd to .gitignore bpf: add support for fixed-size memory pointer returns for kfuncs bpf: generalize dynptr_get_spi to be usable for iters bpf: mark PTR_TO_MEM as non-null register type bpf: move kfunc_call_arg_meta higher in the file bpf: ensure that r0 is marked scratched after any function call bpf: fix visit_insn()'s detection of BPF_FUNC_timer_set_callback helper bpf: clean up visit_insn()'s instruction processing selftests/bpf: adjust log_fixup's buffer size for proper truncation bpf: honor env->test_state_freq flag in is_state_visited() selftests/bpf: enhance align selftest's expected log matching bpf: improve regsafe() checks for PTR_TO_{MEM,BUF,TP_BUFFER} bpf: improve stack slot state printing selftests/bpf: Disassembler tests for verifier.c:convert_ctx_access() selftests/bpf: test if pointer type is tracked for BPF_ST_MEM bpf: allow ctx writes using BPF_ST_MEM instruction bpf: Use separate RCU callbacks for freeing selem ... ==================== Link: https://lore.kernel.org/r/20230307004346.27578-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Alexander Aring
|
01c7a59789 |
fs: dlm: remove deprecated code parts
This patch removes code parts which was declared deprecated by
commit
|
||
|
Qu Wenruo
|
2943868a90 |
btrfs: ioctl: return device fsid from DEV_INFO ioctl
Currently user space utilizes dev info ioctl to grab the info of a
certain devid, this includes its device uuid. But the returned info is
not enough to determine if a device is a seed.
Commit
|
||
|
Linus Torvalds
|
9d0281b56b |
block-6.3-2023-03-03
-----BEGIN PGP SIGNATURE-----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=ezrg
-----END PGP SIGNATURE-----
Merge tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Don't access released socket during error recovery (Akinobu
Mita)
- Bring back auto-removal of deleted namespaces during sequential
scan (Christoph Hellwig)
- Fix an error code in nvme_auth_process_dhchap_challenge (Dan
Carpenter)
- Show well known discovery name (Daniel Wagner)
- Add a missing endianess conversion in effects masking (Keith
Busch)
- Fix for a regression introduced in blk-rq-qos during init in this
merge window (Breno)
- Reorder a few fields in struct blk_mq_tag_set, eliminating a few
holes and shrinking it (Christophe)
- Remove redundant bdev_get_queue() NULL checks (Juhyung)
- Add sed-opal single user mode support flag (Luca)
- Remove SQE128 check in ublk as it isn't needed, saving some memory
(Ming)
- Op specific segment checking for cloned requests (Uday)
- Exclusive open partition scan fixes (Yu)
- Loop offset/size checking before assigning them in the device (Zhong)
- Bio polling fixes (me)
* tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux:
blk-mq: enforce op-specific segment limits in blk_insert_cloned_request
nvme-fabrics: show well known discovery name
nvme-tcp: don't access released socket during error recovery
nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge()
nvme: bring back auto-removal of deleted namespaces during sequential scan
blk-iocost: Pass gendisk to ioc_refresh_params
nvme: fix sparse warning on effects masking
block: be a bit more careful in checking for NULL bdev while polling
block: clear bio->bi_bdev when putting a bio back in the cache
loop: loop_set_status_from_info() check before assignment
ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd
block: remove more NULL checks after bdev_get_queue()
blk-mq: Reorder fields in 'struct blk_mq_tag_set'
block: fix scan partition for exclusively open device again
block: Revert "block: Do not reread partition table on exclusively open device"
sed-opal: add support flag for SUM in status ioctl
|
||
|
Tero Kristo
|
f71f853049 |
bpf: Add support for absolute value BPF timers
Add a new flag BPF_F_TIMER_ABS that can be passed to bpf_timer_start() to start an absolute value timer instead of the default relative value. This makes the timer expire at an exact point in time, instead of a time with latencies induced by both the BPF and timer subsystems. Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com> Link: https://lore.kernel.org/r/20230302114614.2985072-2-tero.kristo@linux.intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Joanne Koong
|
66e3a13e7c |
bpf: Add bpf_dynptr_slice and bpf_dynptr_slice_rdwr
Two new kfuncs are added, bpf_dynptr_slice and bpf_dynptr_slice_rdwr. The user must pass in a buffer to store the contents of the data slice if a direct pointer to the data cannot be obtained. For skb and xdp type dynptrs, these two APIs are the only way to obtain a data slice. However, for other types of dynptrs, there is no difference between bpf_dynptr_slice(_rdwr) and bpf_dynptr_data. For skb type dynptrs, the data is copied into the user provided buffer if any of the data is not in the linear portion of the skb. For xdp type dynptrs, the data is copied into the user provided buffer if the data is between xdp frags. If the skb is cloned and a call to bpf_dynptr_data_rdwr is made, then the skb will be uncloned (see bpf_unclone_prologue()). Please note that any bpf_dynptr_write() automatically invalidates any prior data slices of the skb dynptr. This is because the skb may be cloned or may need to pull its paged buffer into the head. As such, any bpf_dynptr_write() will automatically have its prior data slices invalidated, even if the write is to data in the skb head of an uncloned skb. Please note as well that any other helper calls that change the underlying packet buffer (eg bpf_skb_pull_data()) invalidates any data slices of the skb dynptr as well, for the same reasons. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/r/20230301154953.641654-10-joannelkoong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Joanne Koong
|
05421aecd4 |
bpf: Add xdp dynptrs
Add xdp dynptrs, which are dynptrs whose underlying pointer points to a xdp_buff. The dynptr acts on xdp data. xdp dynptrs have two main benefits. One is that they allow operations on sizes that are not statically known at compile-time (eg variable-sized accesses). Another is that parsing the packet data through dynptrs (instead of through direct access of xdp->data and xdp->data_end) can be more ergonomic and less brittle (eg does not need manual if checking for being within bounds of data_end). For reads and writes on the dynptr, this includes reading/writing from/to and across fragments. Data slices through the bpf_dynptr_data API are not supported; instead bpf_dynptr_slice() and bpf_dynptr_slice_rdwr() should be used. For examples of how xdp dynptrs can be used, please see the attached selftests. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/r/20230301154953.641654-9-joannelkoong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Joanne Koong
|
b5964b968a |
bpf: Add skb dynptrs
Add skb dynptrs, which are dynptrs whose underlying pointer points to a skb. The dynptr acts on skb data. skb dynptrs have two main benefits. One is that they allow operations on sizes that are not statically known at compile-time (eg variable-sized accesses). Another is that parsing the packet data through dynptrs (instead of through direct access of skb->data and skb->data_end) can be more ergonomic and less brittle (eg does not need manual if checking for being within bounds of data_end). For bpf prog types that don't support writes on skb data, the dynptr is read-only (bpf_dynptr_write() will return an error) For reads and writes through the bpf_dynptr_read() and bpf_dynptr_write() interfaces, reading and writing from/to data in the head as well as from/to non-linear paged buffers is supported. Data slices through the bpf_dynptr_data API are not supported; instead bpf_dynptr_slice() and bpf_dynptr_slice_rdwr() (added in subsequent commit) should be used. For examples of how skb dynptrs can be used, please see the attached selftests. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/r/20230301154953.641654-8-joannelkoong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
a8356cdb5b |
LoongArch changes for v6.3
1, Make -mstrict-align configurable; 2, Add kernel relocation and KASLR support; 3, Add single kernel image implementation for kdump; 4, Add hardware breakpoints/watchpoints support; 5, Add kprobes/kretprobes/kprobes_on_ftrace support; 6, Add LoongArch support for some selftests. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmP+9H0WHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImerz+D/98MjkLXM4qtgfAxuBKpVdEVA4U bzO19UlpqWlwTJbwrhf0GYsRrAis37PTVJG4eNORJairJ/oTkMtEEBPhwq0D9Whc URDEh+VrjzFztLsu2OlvzOA9gE7lpg+xAx2LKflP7ixlOELOWeercDLW3octp5/J CJDE8wPaw9tJrMHFWuiVybs03yZmY3YFV55JdWL9hY8Ryy4DY5997mruOfzjvHpl EfDgQM2zCn2JSQwaD+Kl3MHxHyRx07Tj2wnZAh9ptaGeptK/yplc7nqRwhe7BevS QwClhJNPICcOi+evZ7cDUY0PTL4evpw2KRnF1N4zw+58RhZECjVrCEJNdf6L1scj muptQngWKrE/TJvn4way3cJr44stSCtT71elPhn629S23my/CauMmFqCqKpYOPOf pxwzzCaqDcaZKwMu96qBkZS76tIrhoNeNFntj+C9RS+8ezY3+o144S3vF1A6A9Zb M4gwa2NiQuLqnCUwKK6dZkLQVX2NMIMViUkYNKdUStxNWx/K7fFmXcl0ycAFpGYp 8Q95LLH34jUrpSgqMSCmcylsPvNiN1QnuXFnw8Tu+zDthp5dOzio60tORLPM1ZUq gobPeGjeTQInq4eMCf2B5HH8fOMVtJyj6H4K9G1M6HUMg64UtcBp6BvEbwPxTxNN sIOFUjDfDnBiIXWF4w== =SzL5 -----END PGP SIGNATURE----- Merge tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Make -mstrict-align configurable - Add kernel relocation and KASLR support - Add single kernel image implementation for kdump - Add hardware breakpoints/watchpoints support - Add kprobes/kretprobes/kprobes_on_ftrace support - Add LoongArch support for some selftests. * tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (23 commits) selftests/ftrace: Add LoongArch kprobe args string tests support selftests/seccomp: Add LoongArch selftesting support tools: Add LoongArch build infrastructure samples/kprobes: Add LoongArch support LoongArch: Mark some assembler symbols as non-kprobe-able LoongArch: Add kprobes on ftrace support LoongArch: Add kretprobes support LoongArch: Add kprobes support LoongArch: Simulate branch and PC* instructions LoongArch: ptrace: Add hardware single step support LoongArch: ptrace: Add function argument access API LoongArch: ptrace: Expose hardware breakpoints to debuggers LoongArch: Add hardware breakpoints/watchpoints support LoongArch: kdump: Add crashkernel=YM handling LoongArch: kdump: Add single kernel image implementation LoongArch: Add support for kernel address space layout randomization (KASLR) LoongArch: Add support for kernel relocation LoongArch: Add la_abs macro implementation LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs LoongArch: Use la.pcrel instead of la.abs when it's trivially possible ... |
||
|
Felix Kuehling
|
fd234e7581 |
drm/amdkfd: Implement DMA buf fd export from KFD
Exports a DMA buf fd of a given KFD buffer handle. This is intended for being able to import KFD BOs into GEM contexts to leverage the amdgpu_bo_va API for more flexible virtual address mappings. It will also be used for the new upstreamable RDMA solution coming to UCX and RCCL. The corresponding user mode change (Thunk API and kfdtest) is here: https://github.com/fxkamd/ROCT-Thunk-Interface/commits/fxkamd/dmabuf Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Xiaogang Chen <Xiaogang.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
Linus Torvalds
|
5ca26d6039 |
Including fixes from wireless and netfilter.
Current release - regressions:
- phy: multiple fixes for EEE rework
- wifi: wext: warn about usage only once
- wifi: ath11k: allow system suspend to survive ath11k
Current release - new code bugs:
- mlx5: Fix memory leak in IPsec RoCE creation
- ibmvnic: assign XPS map to correct queue index
Previous releases - regressions:
- netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
- netfilter: ctnetlink: make event listener tracking global
- nf_tables: allow to fetch set elements when table has an owner
- mlx5:
- fix skb leak while fifo resync and push
- fix possible ptp queue fifo use-after-free
Previous releases - always broken:
- sched: fix action bind logic
- ptp: vclock: use mutex to fix "sleep on atomic" bug if driver
also uses a mutex
- netfilter: conntrack: fix rmmod double-free race
- netfilter: xt_length: use skb len to match in length_mt6,
avoid issues with BIG TCP
Misc:
- ice: remove unnecessary CONFIG_ICE_GNSS
- mlx5e: remove hairpin write debugfs files
- sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ko4p
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
The notable fixes here are the EEE fix which restores boot for many
embedded platforms (real and QEMU); WiFi warning suppression and the
ICE Kconfig cleanup.
Current release - regressions:
- phy: multiple fixes for EEE rework
- wifi: wext: warn about usage only once
- wifi: ath11k: allow system suspend to survive ath11k
Current release - new code bugs:
- mlx5: Fix memory leak in IPsec RoCE creation
- ibmvnic: assign XPS map to correct queue index
Previous releases - regressions:
- netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
- netfilter: ctnetlink: make event listener tracking global
- nf_tables: allow to fetch set elements when table has an owner
- mlx5:
- fix skb leak while fifo resync and push
- fix possible ptp queue fifo use-after-free
Previous releases - always broken:
- sched: fix action bind logic
- ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also
uses a mutex
- netfilter: conntrack: fix rmmod double-free race
- netfilter: xt_length: use skb len to match in length_mt6, avoid
issues with BIG TCP
Misc:
- ice: remove unnecessary CONFIG_ICE_GNSS
- mlx5e: remove hairpin write debugfs files
- sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
* tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
tcp: tcp_check_req() can be called from process context
net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard
xen-netback: remove unused variables pending_idx and index
net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
net: dsa: ocelot_ext: remove unnecessary phylink.h include
net: mscc: ocelot: fix duplicate driver name error
net: dsa: felix: fix internal MDIO controller resource length
net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
net/sched: act_sample: fix action bind logic
net/sched: act_mpls: fix action bind logic
net/sched: act_pedit: fix action bind logic
wifi: wext: warn about usage only once
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
qede: avoid uninitialized entries in coal_entry array
nfc: fix memory leak of se_io context in nfc_genl_se_io
ice: remove unnecessary CONFIG_ICE_GNSS
net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy()
ibmvnic: Assign XPS map to correct queue index
docs: net: fix inaccuracies in msg_zerocopy.rst
tools: net: add __pycache__ to gitignore
...
|
||
|
Linus Torvalds
|
d40b2f4c94 |
fuse update for 6.3
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCY/ysqAAKCRDh3BK/laaZ PLSfAP9c4z/KOZj/Am8nQ0mqI8Ss0Ei+hyu8Vow6NoyJkR4NvwD/SxEeI2+rpXj7 TGOA+6k4chLc7QIFBsIwGvQgeXld1gA= =s4b/ -----END PGP SIGNATURE----- Merge tag 'fuse-update-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: - Fix regression in fileattr permission checking - Fix possible hang during PID namespace destruction - Add generic support for request extensions - Add supplementary group list extension - Add limited support for supplying supplementary groups in create requests - Documentation fixes * tag 'fuse-update-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: add inode/permission checks to fileattr_get/fileattr_set fuse: fix all W=1 kernel-doc warnings fuse: in fuse_flush only wait if someone wants the return code fuse: optional supplementary group in create requests fuse: add request extension |
||
|
Linus Torvalds
|
4b8c673b76 |
media updates for v6.3-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmP7M9AACgkQCF8+vY7k 4RVpxRAAjarn420frUo/YiMWuYiYtDCFmXj+toHgqsa9fcUOjxml9V+S5L0uY6tF D6d9KCgqKf1AO2MDzB3aR1qQmPfelMoSomQjsTm6cWaMPDobxpzL2IlcspMDBxz0 PyCz4R9cCK5kwuBiQlz3dE605/t/7JXOAFEopo5tvYWNfRt9YXFbPJ/Hdttc4cqw d6js3TN7oxHoa+t5Ox9Fq+i6MSxsMEku5RvfHVI6yUs//eWcf9H2zFfZ83vZ7+vY L8PlRzMXlvovsFwXivtiZdSkuwFloWrqIs8btHb1/psClOUxFQhpk2B4hkUixCAn wk9EN7eHWNdbaZha5//uPRmxUjjhIn4XAIXnfslsB7iiRn7uJtYryUnt+b+kD3Lt dtF2i1W7nNfUd5e7YRjipTjgjtazLpeyDGvH0TqfpwK8Wn10Acj+Az1v4bjf+cc0 GC1EVUtGeJhexYzLsHSQMQZB1IgFxUw5LNKdqsrboled3yvxfgK69Yp9FQLon9vZ R7KEDHuzt+e4Kihxq8dTp6wMV47dNrq0wpJKMjfylKhq/MPqa9uiygl1s2KlMg6n HDJQlYbQGlzrgHDDQRhYUAgxs3JeyxAmup2eLR6dWrAqBW+ULT9S2DiggOk9xxKg UkaCkodr3ZOhZti+oLRRAY2cRsGYgan7rKhscd0t7opO+CrfHxo= =0XIw -----END PGP SIGNATURE----- Merge tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye, stkwebcam, tm6000, vpfe_capture and zr364xx - saa7146 recovered from staging/deprecated. We opted to give ti a chance, and, instead of deprecating it, the intention is to write patches migrating it from VB1 to VB2. - av7110 returned from staging/deprecated/ to staging/ as we're not planning on dropping it any time soon - media controller API has gained experimental support for G_ROUTING and streams API. No drivers use it right now. We're planning to add one after -rc1, giving some time to experience the API and eventually have changes during the next development cycle - New sensor drivers: imx296, imx415, ov8858 - Atomisp had lots of changes, specially on its sensor's interface, making atomisp sensor drivers closer to normal sensor drivers - media controller kAPI has gained some helpers to traverse pipelines - uvcvideo now better support power line control - lots of bug fixes, cleanups and driver improvements * tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits) media: imx-mipi-csis: Check csis_fmt validity before use media: v4l2-subdev.c: clear stream field media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci" media: Revert "media: av7110: move to staging/media/deprecated/saa7146" media: imx-pxp: convert to regmap media: imx-pxp: Use non-threaded IRQ media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers media: imx-pxp: Implement frame size enumeration media: imx-pxp: Pass pixel format value to find_format() media: imx-pxp: Add media controller support media: imx-pxp: Don't set bus_info manually in .querycap() media: imx-pxp: Sort headers alphabetically media: imx-pxp: add support for i.MX7D media: imx-pxp: make data_path_ctrl0 platform dependent media: imx-pxp: disable LUT block media: imx-pxp: explicitly disable unused blocks media: imx-pxp: extract helper function to setup data path media: imx-pxp: detect PXP version media: dt-bindings: media: fsl-pxp: convert to yaml ... |
||
|
Linus Torvalds
|
cac85e4616 |
VFIO updates for v6.3-rc1
- Remove redundant resource check in vfio-platform. (Angus Chen)
- Use GFP_KERNEL_ACCOUNT for persistent userspace allocations, allowing
removal of arbitrary kernel limits in favor of cgroup control.
(Yishai Hadas)
- mdev tidy-ups, including removing the module-only build restriction
for sample drivers, Kconfig changes to select mdev support,
documentation movement to keep sample driver usage instructions with
sample drivers rather than with API docs, remove references to
out-of-tree drivers in docs. (Christoph Hellwig)
- Fix collateral breakages from mdev Kconfig changes. (Arnd Bergmann)
- Make mlx5 migration support match device support, improve source
and target flows to improve pre-copy support and reduce downtime.
(Yishai Hadas)
- Convert additional mdev sysfs case to use sysfs_emit(). (Bo Liu)
- Resolve copy-paste error in mdev mbochs sample driver Kconfig.
(Ye Xingchen)
- Avoid propagating missing reset error in vfio-platform if reset
requirement is relaxed by module option. (Tomasz Duszynski)
- Range size fixes in mlx5 variant driver for missed last byte and
stricter range calculation. (Yishai Hadas)
- Fixes to suspended vaddr support and locked_vm accounting, excluding
mdev configurations from the former due to potential to indefinitely
block kernel threads, fix underflow and restore locked_vm on new mm.
(Steve Sistare)
- Update outdated vfio documentation due to new IOMMUFD interfaces in
recent kernels. (Yi Liu)
- Resolve deadlock between group_lock and kvm_lock, finally.
(Matthew Rosato)
- Fix NULL pointer in group initialization error path with IOMMUFD.
(Yan Zhao)
-----BEGIN PGP SIGNATURE-----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=QqPa
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.3-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Remove redundant resource check in vfio-platform (Angus Chen)
- Use GFP_KERNEL_ACCOUNT for persistent userspace allocations, allowing
removal of arbitrary kernel limits in favor of cgroup control (Yishai
Hadas)
- mdev tidy-ups, including removing the module-only build restriction
for sample drivers, Kconfig changes to select mdev support,
documentation movement to keep sample driver usage instructions with
sample drivers rather than with API docs, remove references to
out-of-tree drivers in docs (Christoph Hellwig)
- Fix collateral breakages from mdev Kconfig changes (Arnd Bergmann)
- Make mlx5 migration support match device support, improve source and
target flows to improve pre-copy support and reduce downtime (Yishai
Hadas)
- Convert additional mdev sysfs case to use sysfs_emit() (Bo Liu)
- Resolve copy-paste error in mdev mbochs sample driver Kconfig (Ye
Xingchen)
- Avoid propagating missing reset error in vfio-platform if reset
requirement is relaxed by module option (Tomasz Duszynski)
- Range size fixes in mlx5 variant driver for missed last byte and
stricter range calculation (Yishai Hadas)
- Fixes to suspended vaddr support and locked_vm accounting, excluding
mdev configurations from the former due to potential to indefinitely
block kernel threads, fix underflow and restore locked_vm on new mm
(Steve Sistare)
- Update outdated vfio documentation due to new IOMMUFD interfaces in
recent kernels (Yi Liu)
- Resolve deadlock between group_lock and kvm_lock, finally (Matthew
Rosato)
- Fix NULL pointer in group initialization error path with IOMMUFD (Yan
Zhao)
* tag 'vfio-v6.3-rc1' of https://github.com/awilliam/linux-vfio: (32 commits)
vfio: Fix NULL pointer dereference caused by uninitialized group->iommufd
docs: vfio: Update vfio.rst per latest interfaces
vfio: Update the kdoc for vfio_device_ops
vfio/mlx5: Fix range size calculation upon tracker creation
vfio: no need to pass kvm pointer during device open
vfio: fix deadlock between group lock and kvm lock
vfio: revert "iommu driver notify callback"
vfio/type1: revert "implement notify callback"
vfio/type1: revert "block on invalid vaddr"
vfio/type1: restore locked_vm
vfio/type1: track locked_vm per dma
vfio/type1: prevent underflow of locked_vm via exec()
vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR
vfio: platform: ignore missing reset if disabled at module init
vfio/mlx5: Improve the target side flow to reduce downtime
vfio/mlx5: Improve the source side flow upon pre_copy
vfio/mlx5: Check whether VF is migratable
samples: fix the prompt about SAMPLE_VFIO_MDEV_MBOCHS
vfio/mdev: Use sysfs_emit() to instead of sprintf()
vfio-mdev: add back CONFIG_VFIO dependency
...
|
||
|
Linus Torvalds
|
84cc6674b7 |
virtio,vhost,vdpa: features, fixes
device feature provisioning in ifcvf, mlx5 new SolidNET driver support for zoned block device in virtio blk numa support in virtio pmem VIRTIO_F_RING_RESET support in vhost-net more debugfs entries in mlx5 resume support in vdpa completion batching in virtio blk cleanup of dma api use in vdpa now simulating more features in vdpa-sim documentation, features, fixes all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmP0D98PHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpV6IH/iecRgLMWWjp3n31IFdu31f/J4HpF7dczVjK qtV98eJ1N2pkgeJkdCfmB5XszfvFBeAurrS7++FTHiJhrRfR3Z+2ml/Qtvh5DEyP qxz6wOw6VVsi/txdUxM1wsxLeEmmzkmFdAmPM+FXeIjhWj76GOgy/4A3eaj6TgzV W8ShsBve/UZ5qMOC3XbIscvdOrudHJ18tH90Tiz3NZfH1fAs5E4uWbU6Mrz9DJVr canGvf4kAI9z8qram5HSgzPIXRJEYiF4q/eiStdtiiME8gL1mHLRZDNP1I1LeCAb q6Q6RCRKi3Ek+LGdH6u+nR1Swu03N2b/g+vgKtv30kJo06oZVzw= =EasV -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: - device feature provisioning in ifcvf, mlx5 - new SolidNET driver - support for zoned block device in virtio blk - numa support in virtio pmem - VIRTIO_F_RING_RESET support in vhost-net - more debugfs entries in mlx5 - resume support in vdpa - completion batching in virtio blk - cleanup of dma api use in vdpa - now simulating more features in vdpa-sim - documentation, features, fixes all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits) vdpa/mlx5: support device features provisioning vdpa/mlx5: make MTU/STATUS presence conditional on feature bits vdpa: validate device feature provisioning against supported class vdpa: validate provisioned device features against specified attribute vdpa: conditionally read STATUS in config space vdpa: fix improper error message when adding vdpa dev vdpa/mlx5: Initialize CVQ iotlb spinlock vdpa/mlx5: Don't clear mr struct on destroy MR vdpa/mlx5: Directly assign memory key tools/virtio: enable to build with retpoline vringh: fix a typo in comments for vringh_kiov vhost-vdpa: print warning when vhost_vdpa_alloc_domain fails scsi: virtio_scsi: fix handling of kmalloc failure vdpa: Fix a couple of spelling mistakes in some messages vhost-net: support VIRTIO_F_RING_RESET vhost-scsi: convert sysfs snprintf and sprintf to sysfs_emit vdpa: mlx5: support per virtqueue dma device vdpa: set dma mask for vDPA device virtio-vdpa: support per vq dma device vdpa: introduce get_vq_dma_device() ... |
||
|
Linus Torvalds
|
49d5759268 |
ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Two patches sorting out confusion between virtual and physical
addresses, which currently are the same on s390.
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world,
some of them affecting architecurally legal but unlikely to
happen in practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM
similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at this
point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and
MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't support
EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just
let the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how
to do initialization.
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit
the correct hypercall instruction instead of relying on KVM to patch
in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP2YA0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg/Qf+J6nT+TkIa+8Ei+fN1oMTDp4YuIOx
mXvJ9mRK9sQ+tAUVwvDz3qN/fK5mjsYbRHIDlVc5p2Q3bCrVGDDqXPFfCcLx1u+O
9U9xjkO4JxD2LS9pc70FYOyzVNeJ8VMGOBbC2b0lkdYZ4KnUc6e/WWFKJs96bK+H
duo+RIVyaMthnvbTwSv1K3qQb61n6lSJXplywS8KWFK6NZAmBiEFDAWGRYQE9lLs
VcVcG0iDJNL/BQJ5InKCcvXVGskcCm9erDszPo7w4Bypa4S9AMS42DHUaRZrBJwV
/WqdH7ckIz7+OSV0W1j+bKTHAFVTCjXYOM7wQykgjawjICzMSnnG9Gpskw==
=goe1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
|
||
|
Linus Torvalds
|
7c3dc440b1 |
cxl for v6.3
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for
setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL HDM
Decoder Capability to translate the CXL DVSEC Range Registers into
'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of hotplug,
or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug message
improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY/WYcgAKCRDfioYZHlFs
Z6m3APkBUtiEEm1o8ikdu5llUS1OTLBwqjJDwGMTyf8X/WDXhgD+J2mLsCgARS7X
5IS0RAtefutrW5sQpUucPM7QiLuraAY=
=kOXC
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dan Williams:
"To date Linux has been dependent on platform-firmware to map CXL RAM
regions and handle events / errors from devices. With this update we
can now parse / update the CXL memory layout, and report events /
errors from devices. This is a precursor for the CXL subsystem to
handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that
for DDR-attached-DRAM is handled by the EDAC driver where it maps
system physical address events to a field-replaceable-unit (FRU /
endpoint device). In general, CXL has the potential to standardize
what has historically been a pile of memory-controller-specific error
handling logic.
Another change of note is the default policy for handling RAM-backed
device-dax instances. Previously the default access mode was "device",
mmap(2) a device special file to access memory. The new default is
"kmem" where the address range is assigned to the core-mm via
add_memory_driver_managed(). This saves typical users from wondering
why their platform memory is not visible via free(1) and stuck behind
a device-file. At the same time it allows expert users to deploy
policy to, for example, get dedicated access to high performance
memory, or hide low performance memory from general purpose kernel
allocations. This affects not only CXL, but also systems with
high-bandwidth-memory that platform-firmware tags with the
EFI_MEMORY_SP (special purpose) designation.
Summary:
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow
for setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL
HDM Decoder Capability to translate the CXL DVSEC Range Registers
into 'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of
hotplug, or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug
message improvements"
* tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits)
dax/kmem: Fix leak of memory-hotplug resources
cxl/mem: Add kdoc param for event log driver state
cxl/trace: Add serial number to trace points
cxl/trace: Add host output to trace points
cxl/trace: Standardize device information output
cxl/pci: Remove locked check for dvsec_range_allowed()
cxl/hdm: Add emulation when HDM decoders are not committed
cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders
cxl/hdm: Emulate HDM decoder from DVSEC range registers
cxl/pci: Refactor cxl_hdm_decode_init()
cxl/port: Export cxl_dvsec_rr_decode() to cxl_port
cxl/pci: Break out range register decoding from cxl_hdm_decode_init()
cxl: add RAS status unmasking for CXL
cxl: remove unnecessary calling of pci_enable_pcie_error_reporting()
dax/hmem: build hmem device support as module if possible
dax: cxl: add CXL_REGION dependency
cxl: avoid returning uninitialized error code
cxl/pmem: Fix nvdimm registration races
cxl/mem: Fix UAPI command comment
cxl/uapi: Tag commands from cxl_query_cmd()
...
|
||
|
Qing Zhang
|
1a69f7a161 |
LoongArch: ptrace: Expose hardware breakpoints to debuggers
Implement the regset-based ptrace interface that exposes hardware breakpoints to user-space debuggers to query and set instruction and data breakpoints. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Linus Torvalds
|
693fed981e |
Char/Misc and other driver subsystem changes for 6.3-rc1
Here is the large set of driver changes for char/misc drivers and other
smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem seems
under very active development recently. This required also merging
in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/inQw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yksvwCeOvU//SPwrbIpaeHAmHUv0PSVOrwAoKmt4ICh
hQUudlztfkvUJxKIH0gh
=Sjk4
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the
shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...
|
||
|
Linus Torvalds
|
17cd4d6f05 |
TTY/Serial driver updates for 6.3-rc1
Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/itAw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykJbQCfWv/J4ZElO108iHBU5mJCDagUDBgAnAtLLN6A SEAnnokGCDtA/BNIXeES =luRi -----END PGP SIGNATURE----- Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits) tty: n_gsm: add keep alive support serial: imx: remove a redundant check dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h tty: n_gsm: add TIOCMIWAIT support tty: n_gsm: add RING/CD control support tty: n_gsm: mark unusable ioctl structure fields accordingly serial: imx: get rid of registers shadowing serial: imx: refine local variables in rxint() serial: imx: stop using USR2 in FIFO reading loop serial: imx: remove redundant USR2 read from FIFO reading loop serial: imx: do not break from FIFO reading loop prematurely serial: imx: do not sysrq broken chars serial: imx: work-around for hardware RX flood serial: imx: factor-out common code to imx_uart_soft_reset() serial: 8250_pci1xxxx: Add power management functions to quad-uart driver serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver serial: 8250_pci1xxxx: Add driver for quad-uart support serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c tty: pcn_uart: fix memory leak with using debugfs_lookup() ... |
||
|
Linus Torvalds
|
72bffe7e1e |
USB / Thunderbolt driver changes for 6.3-rc1
Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ivpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymkdQCeOS6N613eggYrXwnbjJhxMQDtKAcAmweK6kXh
3o1IKOYqIMOx5E7zxn6W
=7ajf
-----END PGP SIGNATURE-----
Merge tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues"
* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
usb: dwc3: xilinx: Remove unused of_gpio,h
usb: typec: pd: Add higher capability sysfs for sink PDO
usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
usb: dwc3: pci: add support for the Intel Meteor Lake-M
usb: gadget: u_ether: Don't warn in gether_setup_name_default()
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_serial: Add null pointer check in gserial_resume
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
xhci: host: potential NULL dereference in xhci_generic_plat_probe()
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
of: device: Do not ignore error code in of_device_uevent_modalias
of: device: Ignore modalias of reused nodes
usb: gadget: configfs: Fix set but not used variable warning
usb: gadget: uvc: Use custom strings if available
usb: gadget: uvc: Allow linking function to string descs
usb: gadget: uvc: Pick up custom string descriptor IDs
usb: gadget: uvc: Allow linking XUs to string descriptors
usb: gadget: configfs: Attach arbitrary strings to cdev
usb: gadget: configfs: Support arbitrary string descriptors
...
|
||
|
Tariq Toukan
|
1862de92c8 |
netdev-genl: fix repeated typo oflloading -> offloading
Fix a repeated copy/paste typo.
Fixes:
|
||
|
Linus Torvalds
|
3822a7c409 |
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
||
|
Linus Torvalds
|
a5c95ca18a |
drm next for 6.3-rc1
Removals:
- remove legacy dri1 drivers -
- i810, mga, r128, savage, sis, tdfx, via
New driver:
- intel VPU accelerator driver
- habanalabs comes via drm tree now
drm/core:
- use drm_dbg_ helpers in several places
- Document defaults for CRTC backgrounds
- Document use of drm_minor
edid:
- improve mode parsing and refactoring
connector:
- support analog TV mode property
media:
- add some common formats
udmabuf:
- add vmap/vunmap methods
fourcc:
- add XRGB1555 and RGB565 formats
- document open source user waiver
firmware:
- fix color-format selection for system framebuffer
format-helper:
- Add conversion from XRGB8888 to various sysfb formats
- Make XRGB8888 the only driver-emulated legacy format
- Add conversion from XRGB8888 to XBGR8888 and ABGR8888
fb-helper:
- fix preferred depth and bpp values across drivers
- Avoid blank consoles from selecting an incorrect color format
probe-helper:
- Enable/disable HPD on connectors
scheduler:
- Fix lockup in drm_sched_entity_kill()
- Deprecate drm_sched_resubmit_jobs()
bridge:
- remove unused functions
- implement i2c probe_new in various drivers
- ite-it6505: Locking fixes, Cache EDID data
- ite-it66121: Support IT6610 chip
- lontium-tl9611: Fix HDMI on DragonBoard 845c
- parade-ps8640: Use atomic bridge functions
- Support i.MX93 LDB plus DT bindings
debugfs:
- add per device helpers and convert drivers
displayport:
- mst fixes
- add DP adaptive sync DPCD definitions
fbdev:
- always pick 32bpp as default
- remove some unused code
simpledrm:
- support system memory framebuffers
panel:
- add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
- Use ktime_get_boottime() to measure power-down delay
- Fix auto-suspend delay
- Visionox VTDR6130 AMOLED DSI
- Support Himax HX8394
- Convert many drivers to common generic DSI write-sequence helper
- AUO A030JTN01
ttm:
- drop bo wait wrapper
- fix MIPS build
habanalabs:
- moved driver to accel subsystem
- gaudi2 decoder error improvement
- more trace events
- Gaudi2 abrupt reset by firmware support
- add uAPI to flush memory transactions
- add uAPI to pass through userspace reqs to fw
- remove dma-buf export by handle
amdgpu:
- add new INFO queries for peak and min sclk/mclk for profile modes
- Add PCIe info to the INFO IOCTL
- secure display support for multiple displays
- DML optimizations
- DCN 3.2 updates
- PSR updates
- DP 2.1 updates
- SR-IOV RAS updates
- VCN RAS support
- SMU 13.x updates
- Switch 1 element arrays to flexible arrays
- Add RAS support for DF 4.3
- Stack size improvements
- S0ix rework
- Allow 0 as a vram limit on APUs
- Handle profiling modes for SMU13.x
- Fix possible segfault in failure case
- Rework FW requests to happen in early_init for all IPs so
that we don't lose the sbios console if FW is missing
- Fix power reporting on certain firmwares for CZN/RN
- Allow S0ix without BIOS support
- Enable freesync over PCon
- Re-enable the AGP aperture on GMC 11.x
amdkfd:
- Error handling fixes
- PASID fixes
- Fix for cleared VRAM BOs
- Fix cleanup if GPUVM creation fails
- Memory accounting fix
- Use resource_size rather than open codeing it
- GC11 mGPU fix
radeon:
- Switch 1 element arrays to flexible arrays
- Fix memory leak on shutdown
- move to new logging
i915:
- Meteorlake display/OA/GSC fw/workarounds enabling
- DP MST DSC support
- Gamma/degamma readout support for the state checker
- Enable SDP split support for DP 2.0
- Add probe blocking support to i915.force_probe parameter
- Enable Xe HP 4tile support
- Avoid display direct calls to uncore
- Fix HuC delayed load memory leaks
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663
- Improve suspend / resume times with VT-d scanout workaround active
- Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state
- Fix TLB invalidation for Gen12.50 video and compute engines
- Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid
- Start using unversioned DMC firmware paths for new platforms
- ELD refactor: Stop using hardware buffer, precompute ELD
- lots of display code refactoring
nouveau:
- drop legacy ioctl support
- replace 0-sized array
msm:
- dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform
- Added bindings for SM8150
- dpu: Partial support for DSC on SM8150 and SM8250
- dpu: Fixed color transformation matrix being lost on suspend/resume
- dp: Support SDM845 and SC8280XP platforms
- dp: Support for limiting DP link rate via DT property
- dsi: Validate display modes according to the DSI OPP table
- dsi: DSI PHY support for the SM6375 platform
- Add MSM_SUBMIT_BO_NO_IMPLICI
- a2xx: Support to load legacy firmware
- a6xx: GPU devcore dump updates for a650/a660
- GPU devfreq tuning and fixes
- Turn 8960 HDMI PHY into clock provider,
- Make 8960 HDMI PHY use PXO clock from DT
etnaviv:
- experimental versilicon NPU support
- report GPU load via fdinfo format
- MMU fault message improvements
tegra:
- rework syncpoint interrupt
mediatek:
- DSI timing fix
- fix config deps
ast:
- various fixes
exynos:
- restore bridge chain order fixes
gud:
- convert to shadow plane buffers
- perform flushing synchronously during atomic update
- Use new debugfs helpers
arm/hdlcd:
- Use new debugfs helper
ili9486:
- Support 16-bit pixel data
imx:
- Split off IPUv3 driver
mipi-dbi:
- convert to DRM shadow-plane helpers
- rsp driver changes
- Support separate I/O-voltage supply
mxsfb:
- Depend on ARCH_MXS or ARCH_MXC
sun4i:
- convert to new TV mode property
vc4:
- convert to new TV mode property
- kunit tests
- Support RGB565 and RGB666 formats
- convert dsi driver to bridge
- Various HVS an CRTC fixes
v3d:
- Do not opencode drm_gem_object_lookup()
virtio:
- improve tracing
vkms:
- support small cursors in IGT tests
- Fix SEGFAULT from incorrect GEM-buffer mapping
rcar-du:
- fixes and improvements
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmP2rKwACgkQDHTzWXnE
hr7cZw//WNBHajGXWUnuhh5GEd5QDiEzC5cazNT+QE9XFuv/ZT/AxchZ+v2zAYM7
uZ0VhRrWq7y2OZtNQjQ9LSTUE1vAjXwTH5roIKWQH4Xl4r2iPpqBMpvYppptOaoP
MEXqtTXAIjzxRPFFzXGuj4CnfsTUhLn8YM6roAJ+Q+banszxNL1XBPs8xO2isyko
6RFk4XHhIwhnL3GCCggNcxSQh2itZ6niytLXScO1YgoQ90eDVJl+RAEO14K10svL
Dq5tImbuwze06blM8xZxjDRtlNu/0n3Y1VC4oCDvEZHQFq7gfMk5rc1GpBAz9MUT
bBT9Ep4Q8Sp1xcyvxWSEDO8QV/C9y8Fr48CIfsJAxjtlLBuTvUZmSQI/jvoNeJmi
G3pFY6QmuEkl2W9uxPQusFlRVnPrlO0KFMORgxg9w95xqT9Rb2+F6dAauIjuiZLR
WgQPBy2wLxjxZek0am3U2b4B6EgPHLBEyfQge51Qh3EOL6rIZO3Yx+wAJVglTKRH
WzSyMRx0LQKyG4soE8P7V3KNBdsSgsjgq1I5fPyiJ4ck06d7jOD+BZVEfbAdz9Mi
eOxfCx3P83LCedKLfgQ652lc2BSgu+04N69/d06eNuSFbWgCl9Aw/4WmwGAQEP0w
B7w+Od20psq2ffEz7GwO8BP9c6K++a5PvlsvhiSYJqjkHndgcMY=
=HQUi
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There are a bunch of changes all over in the usual places.
Highlights:
- habanalabs moves from misc to accel
- first accel driver for Intel VPU (Versatile Processing Unit)
inference engine
- dropped all the ancient legacy DRI1 drivers. I think it's been at
least 10 years since anyone has heard about these.
- Intel DG2 updates and prelim Meteorlake enablement
- etnaviv adds support for Versilicon NPU device (a GPU like engine
with inference accelerators)
Detailed summary:
Removals:
- remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via
New driver:
- intel VPU accelerator driver
- habanalabs comes via drm tree now
drm/core:
- use drm_dbg_ helpers in several places
- Document defaults for CRTC backgrounds
- Document use of drm_minor
edid:
- improve mode parsing and refactoring
connector:
- support analog TV mode property
media:
- add some common formats
udmabuf:
- add vmap/vunmap methods
fourcc:
- add XRGB1555 and RGB565 formats
- document open source user waiver
firmware:
- fix color-format selection for system framebuffer
format-helper:
- Add conversion from XRGB8888 to various sysfb formats
- Make XRGB8888 the only driver-emulated legacy format
- Add conversion from XRGB8888 to XBGR8888 and ABGR8888
fb-helper:
- fix preferred depth and bpp values across drivers
- Avoid blank consoles from selecting an incorrect color format
probe-helper:
- Enable/disable HPD on connectors
scheduler:
- Fix lockup in drm_sched_entity_kill()
- Deprecate drm_sched_resubmit_jobs()
bridge:
- remove unused functions
- implement i2c probe_new in various drivers
- ite-it6505: Locking fixes, Cache EDID data
- ite-it66121: Support IT6610 chip
- lontium-tl9611: Fix HDMI on DragonBoard 845c
- parade-ps8640: Use atomic bridge functions
- Support i.MX93 LDB plus DT bindings
debugfs:
- add per device helpers and convert drivers
displayport:
- mst fixes
- add DP adaptive sync DPCD definitions
fbdev:
- always pick 32bpp as default
- remove some unused code
simpledrm:
- support system memory framebuffers
panel:
- add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
- Use ktime_get_boottime() to measure power-down delay
- Fix auto-suspend delay
- Visionox VTDR6130 AMOLED DSI
- Support Himax HX8394
- Convert many drivers to common generic DSI write-sequence helper
- AUO A030JTN01
ttm:
- drop bo wait wrapper
- fix MIPS build
habanalabs:
- moved driver to accel subsystem
- gaudi2 decoder error improvement
- more trace events
- Gaudi2 abrupt reset by firmware support
- add uAPI to flush memory transactions
- add uAPI to pass through userspace reqs to fw
- remove dma-buf export by handle
amdgpu:
- add new INFO queries for peak and min sclk/mclk for profile modes
- Add PCIe info to the INFO IOCTL
- secure display support for multiple displays
- DML optimizations
- DCN 3.2 updates
- PSR updates
- DP 2.1 updates
- SR-IOV RAS updates
- VCN RAS support
- SMU 13.x updates
- Switch 1 element arrays to flexible arrays
- Add RAS support for DF 4.3
- Stack size improvements
- S0ix rework
- Allow 0 as a vram limit on APUs
- Handle profiling modes for SMU13.x
- Fix possible segfault in failure case
- Rework FW requests to happen in early_init for all IPs so that we
don't lose the sbios console if FW is missing
- Fix power reporting on certain firmwares for CZN/RN
- Allow S0ix without BIOS support
- Enable freesync over PCon
- Re-enable the AGP aperture on GMC 11.x
amdkfd:
- Error handling fixes
- PASID fixes
- Fix for cleared VRAM BOs
- Fix cleanup if GPUVM creation fails
- Memory accounting fix
- Use resource_size rather than open codeing it
- GC11 mGPU fix
radeon:
- Switch 1 element arrays to flexible arrays
- Fix memory leak on shutdown
- move to new logging
i915:
- Meteorlake display/OA/GSC fw/workarounds enabling
- DP MST DSC support
- Gamma/degamma readout support for the state checker
- Enable SDP split support for DP 2.0
- Add probe blocking support to i915.force_probe parameter
- Enable Xe HP 4tile support
- Avoid display direct calls to uncore
- Fix HuC delayed load memory leaks
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663
- Improve suspend / resume times with VT-d scanout workaround active
- Fix DG2 visual corruption on small BAR systems by not forgetting to
copy CCS aux state
- Fix TLB invalidation for Gen12.50 video and compute engines
- Enable HF-EEODB by switching HDMI, DP and LVDS to use struct
drm_edid
- Start using unversioned DMC firmware paths for new platforms
- ELD refactor: Stop using hardware buffer, precompute ELD
- lots of display code refactoring
nouveau:
- drop legacy ioctl support
- replace 0-sized array
msm:
- dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform
- Added bindings for SM8150
- dpu: Partial support for DSC on SM8150 and SM8250
- dpu: Fixed color transformation matrix being lost on suspend/resume
- dp: Support SDM845 and SC8280XP platforms
- dp: Support for limiting DP link rate via DT property
- dsi: Validate display modes according to the DSI OPP table
- dsi: DSI PHY support for the SM6375 platform
- Add MSM_SUBMIT_BO_NO_IMPLICI
- a2xx: Support to load legacy firmware
- a6xx: GPU devcore dump updates for a650/a660
- GPU devfreq tuning and fixes
- Turn 8960 HDMI PHY into clock provider,
- Make 8960 HDMI PHY use PXO clock from DT
etnaviv:
- experimental versilicon NPU support
- report GPU load via fdinfo format
- MMU fault message improvements
tegra:
- rework syncpoint interrupt
mediatek:
- DSI timing fix
- fix config deps
ast:
- various fixes
exynos:
- restore bridge chain order fixes
gud:
- convert to shadow plane buffers
- perform flushing synchronously during atomic update
- Use new debugfs helpers
arm/hdlcd:
- Use new debugfs helper
ili9486:
- Support 16-bit pixel data
imx:
- Split off IPUv3 driver
mipi-dbi:
- convert to DRM shadow-plane helpers
- rsp driver changes
- Support separate I/O-voltage supply
mxsfb:
- Depend on ARCH_MXS or ARCH_MXC
sun4i:
- convert to new TV mode property
vc4:
- convert to new TV mode property
- kunit tests
- Support RGB565 and RGB666 formats
- convert dsi driver to bridge
- Various HVS an CRTC fixes
v3d:
- Do not opencode drm_gem_object_lookup()
virtio:
- improve tracing
vkms:
- support small cursors in IGT tests
- Fix SEGFAULT from incorrect GEM-buffer mapping
rcar-du:
- fixes and improvements"
* tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits)
msm/fbdev: fix unused variable warning with clang.
drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()
dma-buf: make kobj_type structure constant
drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()
drm/amd/display: disable SubVP + DRR to prevent underflow
drm/amd/display: Fail atomic_check early on normalize_zpos error
drm/amd/pm: avoid unaligned access warnings
drm/amd/display: avoid unaligned access warnings
drm/amd/display: Remove duplicate/repeating expressions
drm/amd/display: Remove duplicate/repeating expression
drm/amd/display: Make variables declaration inside ifdef guard
drm/amd/display: Fix excess arguments on kernel-doc
drm/amd/display: Add previously missing includes
drm/amd/amdgpu: Add function prototypes to headers
drm/amd/display: Add function prototypes to headers
drm/amd/display: Turn global functions into static
drm/amd/display: remove unused _calculate_degamma_curve function
drm/amd/display: remove unused func declaration from resource headers
drm/amd/display: unset initial value for tf since it's never used
drm/amd/display: camel case cleanup in color_gamma file
...
|
||
|
Linus Torvalds
|
5b7c4cabbb |
Networking changes for 6.3.
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
|
||
|
Linus Torvalds
|
8bf1a529cd |
arm64 updates for 6.3:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore. - Include TPIDR2 in the signal context and add the corresponding kselftests. - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time. - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64. - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables. - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values). - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure. - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice. - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone. - Further arm64 sysreg conversion and some fixes. - arm64 kselftest fixes and improvements. - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation. - Pseudo-NMI code generation optimisations. - Minor fixes for SME and TPIDR2 handling. - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmP0/QsACgkQa9axLQDI XvG+gA/+JDVEH9wRzAIZvbp9hSuohPc48xgAmIMP1eiVB0/5qeRjYAJwS33H0rXS BPC2kj9IBy/eQeM9ICg0nFd0zYznSVacITqe6NrqeJ1F+ftS4rrHdfxd+J7kIoCs V2L8e+BJvmHdhmNV2qMAgJdGlfxfQBA7fv2cy52HKYcouoOh1AUVR/x+yXVXAsCd qJP3+dlUKccgm/oc5unEC1eZ49u8O+EoasqOyfG6K5udMgzhEX3K6imT9J3hw0WT UjstYkx5uGS/prUrRCQAX96VCHoZmzEDKtQuHkHvQXEYXsYPF3ldbR2CziNJnHe7 QfSkjJlt8HAtExA+BkwEe9i0MQO/2VF5qsa2e4fA6l7uqGu3LOtS/jJd23C9n9fR Id8aBMeN6S8+MjqRA9L2uf4t6e4ISEHoG9ZRdc4WOwloxEEiJoIeun+7bHdOSZLj AFdHFCz4NXiiwC0UP0xPDI2YeCLqt5np7HmnrUqwzRpVO8UUagiJD8TIpcBSjBN9 J68eidenHUW7/SlIeaMKE2lmo8AUEAJs9AorDSugF19/ThJcQdx7vT2UAZjeVB3j 1dbbwajnlDOk/w8PQC4thFp5/MDlfst0htS3WRwa+vgkweE2EAdTU4hUZ8qEP7FQ smhYtlT1xUSTYDTqoaG/U2OWR6/UU79wP0jgcOsHXTuyYrtPI/Q= =VmXL -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore - Include TPIDR2 in the signal context and add the corresponding kselftests - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64 - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values) - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone - Further arm64 sysreg conversion and some fixes - arm64 kselftest fixes and improvements - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation - Pseudo-NMI code generation optimisations - Minor fixes for SME and TPIDR2 handling - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits) arm64: fix .idmap.text assertion for large kernels kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context arm64: kprobes: Drop ID map text from kprobes blacklist perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 arm64/sme: Fix __finalise_el2 SMEver check drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable arm64/signal: Only read new data when parsing the ZT context arm64/signal: Only read new data when parsing the ZA context arm64/signal: Only read new data when parsing the SVE context arm64/signal: Avoid rereading context frame sizes arm64/signal: Make interface for restore_fpsimd_context() consistent arm64/signal: Remove redundant size validation from parse_user_sigframe() arm64/signal: Don't redundantly verify FPSIMD magic arm64/cpufeature: Use helper macros to specify hwcaps arm64/cpufeature: Always use symbolic name for feature value in hwcaps arm64/sysreg: Initial unsigned annotations for ID registers arm64/sysreg: Initial annotation of signed ID registers ... |
||
|
Linus Torvalds
|
4a7d37e824 |
hardening updates for v6.3-rc1
- Replace 0-length and 1-element arrays with flexible arrays in various
subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees Cook)
- randstruct: Disable Clang 15 support (Eric Biggers)
- GCC plugins: Drop -std=gnu++11 flag (Sam James)
- strpbrk(): Refactor to use strchr() (Andy Shevchenko)
- LoadPin LSM: Allow root filesystem switching when non-enforcing
- fortify: Use dynamic object size hints when available
- ext4: Fix CFI function prototype mismatch
- Nouveau: Fix DP buffer size arguments
- hisilicon: Wipe entire crypto DMA pool on error
- coda: Fully allocate sig_inputArgs
- UBSAN: Improve arm64 trap code reporting
- copy_struct_from_user(): Add minimum bounds check on kernel buffer size
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmPv1Y8WHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJg5UD/9x3Lx0EG3iL4qPtjmohaXd899r
AzP1ysoxYnmo/cY0//W3DPCJrUaVlTm7M2xXOpzi7YPVD8Jcofzy6Uxm9BiG/OJ9
bla7uQixlDMA2MBmWzAXhM7337WgEtBcr6kbXk6rHFnzmk8CdAY3wjmLmiefxEWT
gkdeJlbkBFynssSF2nejgCvr/ZyiWQr2V9hRdEavLQH/MDS785bmNwbLyUNqK+eo
gOtuyjyV90t+cSIN0bF7gOCFGf1ivKA/+GNFrob0jY0Fy2kGx1I2wQMn9yzjzerC
o6Majz9r+7Z7xIaz2Pm9nDaWyZDI05RfoRpQZ9dSEJ+zYgbFBFpDpJShcJvSpNa0
POqeR400n/6VWBcbk7UU0s7VCVU13IsOFhBSVMQM5FfzIcUkj0/VBm0Jm0ODrpM9
13/nKyAkvHkH0uSJbQjn79rXvEvqQyi5f28emm2CuhiHHUiDEUdsmMD7fE8UXo4r
U8dgfwTOLLQBKmOQJcgiLo8iLDPhatZKYQAZ7LMY9kbHLsJlRVxfzY9PriNCuI5o
XuMLJG33TrlUDfqQrKeSJ9srVRiiIBAzoWnIfIVE3Xb46LqFNXVRdJCt4A2678jn
gYIzkQ2HbVe2chUhUyjsjGTjmmeX9qZG0UOlhRQ0RvWFxi390wwYqhkSaOEGtDGv
QbVh0Lb86m3H/G+M9g==
=XnVa
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"Beyond some specific LoadPin, UBSAN, and fortify features, there are
other fixes scattered around in various subsystems where maintainers
were okay with me carrying them in my tree or were non-responsive but
the patches were reviewed by others:
- Replace 0-length and 1-element arrays with flexible arrays in
various subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees
Cook)
- randstruct: Disable Clang 15 support (Eric Biggers)
- GCC plugins: Drop -std=gnu++11 flag (Sam James)
- strpbrk(): Refactor to use strchr() (Andy Shevchenko)
- LoadPin LSM: Allow root filesystem switching when non-enforcing
- fortify: Use dynamic object size hints when available
- ext4: Fix CFI function prototype mismatch
- Nouveau: Fix DP buffer size arguments
- hisilicon: Wipe entire crypto DMA pool on error
- coda: Fully allocate sig_inputArgs
- UBSAN: Improve arm64 trap code reporting
- copy_struct_from_user(): Add minimum bounds check on kernel buffer
size"
* tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: disable Clang 15 support
uaccess: Add minimum bounds check on kernel buffer size
arm64: Support Clang UBSAN trap codes for better reporting
coda: Avoid partial allocation of sig_inputArgs
gcc-plugins: drop -std=gnu++11 to fix GCC 13 build
lib/string: Use strchr() in strpbrk()
crypto: hisilicon: Wipe entire pool on error
net/i40e: Replace 0-length array with flexible array
io_uring: Replace 0-length array with flexible array
ext4: Fix function prototype mismatch for ext4_feat_ktype
i915/gvt: Replace one-element array with flexible-array member
drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size
LoadPin: Allow filesystem switch when not enforcing
LoadPin: Move pin reporting cleanly out of locking
LoadPin: Refactor sysctl initialization
LoadPin: Refactor read-only check into a helper
ARM: ixp4xx: Replace 0-length arrays with flexible arrays
fortify: Use __builtin_dynamic_object_size() when available
rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper
|
||
|
Günther Noack
|
ed35e2f2f0
|
landlock: Clarify documentation for the LANDLOCK_ACCESS_FS_REFER right
Clarify the "refer" documentation by splitting up a big paragraph of text. - Call out specifically that the denial by default applies to ABI v1 as well. - Turn the three additional constraints for link/rename operations into bullet points, to give it more structure. Signed-off-by: Günther Noack <gnoack3000@gmail.com> Link: https://lore.kernel.org/r/20230221165205.4231-1-gnoack3000@gmail.com Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
|
Linus Torvalds
|
1f2d9ffc7a |
Scheduler updates in this cycle are:
- Improve the scalability of the CFS bandwidth unthrottling logic
with large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with
the generic scheduler code. Add __cpuidle methods as noinstr to
objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS,
to query previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period,
to improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- ... Misc other cleanups, fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=l1nN
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
|
||
|
Jakub Kicinski
|
ee8d72a157 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY+/uBgAKCRDbK58LschI g0ngAPwJHd1RicBuy2C4fLv0nGKZtmYZBAnTGlI2RisPxU6BRwEAwUDLHuc5K6nR j261okOxOy/MRxdN1NhmR6Qe7nMyQAk= =tYU+ -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-02-17 We've added 64 non-merge commits during the last 7 day(s) which contain a total of 158 files changed, 4190 insertions(+), 988 deletions(-). The main changes are: 1) Add a rbtree data structure following the "next-gen data structure" precedent set by recently-added linked-list, that is, by using kfunc + kptr instead of adding a new BPF map type, from Dave Marchevsky. 2) Add a new benchmark for hashmap lookups to BPF selftests, from Anton Protopopov. 3) Fix bpf_fib_lookup to only return valid neighbors and add an option to skip the neigh table lookup, from Martin KaFai Lau. 4) Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accouting for container environments, from Yafang Shao. 5) Batch of ice multi-buffer and driver performance fixes, from Alexander Lobakin. 6) Fix a bug in determining whether global subprog's argument is PTR_TO_CTX, which is based on type names which breaks kprobe progs, from Andrii Nakryiko. 7) Prep work for future -mcpu=v4 LLVM option which includes usage of BPF_ST insn. Thus improve BPF_ST-related value tracking in verifier, from Eduard Zingerman. 8) More prep work for later building selftests with Memory Sanitizer in order to detect usages of undefined memory, from Ilya Leoshkevich. 9) Fix xsk sockets to check IFF_UP earlier to avoid a NULL pointer dereference via sendmsg(), from Maciej Fijalkowski. 10) Implement BPF trampoline for RV64 JIT compiler, from Pu Lehui. 11) Fix BPF memory allocator in combination with BPF hashtab where it could corrupt special fields e.g. used in bpf_spin_lock, from Hou Tao. 12) Fix LoongArch BPF JIT to always use 4 instructions for function address so that instruction sequences don't change between passes, from Hengqi Chen. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits) selftests/bpf: Add bpf_fib_lookup test bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup riscv, bpf: Add bpf trampoline support for RV64 riscv, bpf: Add bpf_arch_text_poke support for RV64 riscv, bpf: Factor out emit_call for kernel and bpf context riscv: Extend patch_text for multiple instructions Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES" selftests/bpf: Add global subprog context passing tests selftests/bpf: Convert test_global_funcs test to test_loader framework bpf: Fix global subprog context argument resolution logic LoongArch, bpf: Use 4 instructions for function address in JIT bpf: bpf_fib_lookup should not return neigh in NUD_FAILED state bpf: Disable bh in bpf_test_run for xdp and tc prog xsk: check IFF_UP earlier in Tx path Fix typos in selftest/bpf files selftests/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() samples/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() bpftool: Use bpf_{btf,link,map,prog}_get_info_by_fd() libbpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() libbpf: Introduce bpf_{btf,link,map,prog}_get_info_by_fd() ... ==================== Link: https://lore.kernel.org/r/20230217221737.31122-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Sebastien Boeuf
|
3b688d7a08 |
vhost-vdpa: uAPI to resume the device
This new ioctl adds support for resuming the device from userspace. This is required when trying to restore the device in a functioning state after it's been suspended. It is already possible to reset a suspended device, but that means the device must be reconfigured and all the IOMMU/IOTLB mappings must be recreated. This new operation allows the device to be resumed without going through a full reset. This is particularly useful when trying to perform offline migration of a virtual machine (also known as snapshot/restore) as it allows the VMM to resume the virtual machine back to a running state after the snapshot is performed. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Message-Id: <73b75fb87d25cff59768b4955a81fe7ffe5b4770.1672742878.git.sebastien.boeuf@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> |
||
|
Sebastien Boeuf
|
69106b6fb3 |
vhost-vdpa: Introduce RESUME backend feature bit
Userspace knows if the device can be resumed or not by checking this feature bit. It's only exposed if the vdpa driver backend implements the resume() operation callback. Userspace trying to negotiate this feature when it hasn't been exposed will result in an error. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Message-Id: <b18db236ba3d990cdb41278eb4703be9201d9514.1672742878.git.sebastien.boeuf@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> |
||
|
Linus Torvalds
|
5b0ed59649 |
for-6.3/block-2023-02-16
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmPvfncQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpob2EADXJxcr2jjYHm/7cjKkyuVX8fr80dNdMeuY
JFdsjG1k6Uj73BVhQQWYTcs/PsrWBHWRsv6uz4WgOELj55eXmf5Q0kJszyUeJW33
/DjqLvtoppVcYf80xE13wKvCfn73BjwQo6xkGM0qAYn15eaXiD/Ax3xC6eJlsBeK
PEw7EJyhacbSxZa/1D2B6+mqII1jUQWProTCc3udZ4JHi3WvdWa3Rda0qCqHl4a1
+K2aP2YTFIRPxBzfMNa/CafWVIFubTdht+4Ds6R60RImzB9e0VUBfcsiUyW5Zg7L
Fwv7ptXuWrALwVNdW56Oz1QikBxn2pdRR2HMLwKJW1MD8kP9r8LMm2jV5Rhiwe0B
OQsGRYkOzBvw+bxeP5fvk0iPGVMz6ActH4gkraA5QdLqayDaFYOadlhqz0uRo5SH
Fb42Vl658K/MHDSIk8U58TNkmrsIJsBGohXI9DOGINPPvv3XOPi4Q1HmXkGRmii0
y+lNU/QEGh7xXXew29SPP76uQpQaYfC7NxXCMw/OpOMwehzjsjshmM2lpxi8zsgt
PJUmfHv5qxCplNmTJXmUpmX7sS7550HUdu9FJb13DM+gzKg8bk9jWVuLrzqrVlG5
1hKWEl1+heg1heRfaIuJVLbPI0au6Sb4uqhih/PHyrP9TWIoAruDbDJM65GKTxyE
2uEgcHzHQw==
=poRc
-----END PGP SIGNATURE-----
Merge tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Christoph:
- Small improvements to the logging functionality (Amit Engel)
- Authentication cleanups (Hannes Reinecke)
- Cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- Work around the command effects for Format NVM (Keith Busch)
- Misc cleanups (Keith Busch, Christoph Hellwig)
- Fix and cleanup freeing single sgl (Keith Busch)
- MD updates via Song:
- Fix a rare crash during the takeover process
- Don't update recovery_cp when curr_resync is ACTIVE
- Free writes_pending in md_stop
- Change active_io to percpu
- Updates to drbd, inching us closer to unifying the out-of-tree driver
with the in-tree one (Andreas, Christoph, Lars, Robert)
- BFQ update adding support for multi-actuator drives (Paolo, Federico,
Davide)
- Make brd compliant with REQ_NOWAIT (me)
- Fix for IOPOLL and queue entering, fixing stalled IO waiting on
timeouts (me)
- Fix for REQ_NOWAIT with multiple bios (me)
- Fix memory leak in blktrace cleanup (Greg)
- Clean up sbitmap and fix a potential hang (Kemeng)
- Clean up some bits in BFQ, and fix a bug in the request injection
(Kemeng)
- Clean up the request allocation and issue code, and fix some bugs
related to that (Kemeng)
- ublk updates and fixes:
- Add support for unprivileged ublk (Ming)
- Improve device deletion handling (Ming)
- Misc (Liu, Ziyang)
- s390 dasd fixes (Alexander, Qiheng)
- Improve utility of request caching and fixes (Anuj, Xiao)
- zoned cleanups (Pankaj)
- More constification for kobjs (Thomas)
- blk-iocost cleanups (Yu)
- Remove bio splitting from drivers that don't need it (Christoph)
- Switch blk-cgroups to use struct gendisk. Some of this is now
incomplete as select late reverts were done. (Christoph)
- Add bvec initialization helpers, and convert callers to use that
rather than open-coding it (Christoph)
- Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin,
Matthew, Ulf, Zhong)
* tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits)
brd: use radix_tree_maybe_preload instead of radix_tree_preload
block: use proper return value from bio_failfast()
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
block: Fix io statistics for cgroup in throttle path
brd: mark as nowait compatible
brd: check for REQ_NOWAIT and set correct page allocation mask
brd: return 0/-error from brd_insert_page()
block: sync mixed merged request's failfast with 1st bio's
Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
Revert "blk-cgroup: pass a gendisk to blkg_lookup"
Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
Revert "blk-cgroup: move the cgroup information to struct gendisk"
nvme-pci: remove iod use_sgls
nvme-pci: fix freeing single sgl
block: ublk: check IO buffer based on flag need_get_data
s390/dasd: Fix potential memleak in dasd_eckd_init()
s390/dasd: sort out physical vs virtual pointers usage
block: Remove the ALLOC_CACHE_SLACK constant
block: make kobj_type structures constant
...
|
||
|
Linus Torvalds
|
cce5fe5eda |
for-6.3/io_uring-2023-02-16
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmPueWMQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgprngEADFtiQ+B3+PQxo6Y32H7JJloqG7e6HtyysO i7mZm3kbnpklFqqjqgswlTeBxwmQnJxfTaY9pl89AGMps2VmW50GpwnDR7VJb4nF VdWHgQ9n3+P/C+p1zcH0T+8ftP5GnmgckEWKisxIxaNNCGuenGhYmFo2qC7CyCl9 pzcukYrbjauytR59aCtV+bVZ/9tjpQw7QylUJ0oEk+BZ8md5O+DBUfkZbA65qj1X G9Jyb5fybLkyiWU2oXJ7XjSqEYND7I5io0yg9CtGsYzHCgrZcteX0L2Jux5CYvLd 6QIEgPWF1235Z9L0Zy7RcT6rvuCTVTdGVTjAFgT67WpeTaLNLn4ZC4Pm0MGGsx1i QhLsMxJhyFCcsMrii1FtIKPrxvS9hI/5HYymhUqU4wksno4Fpfg3nW2/HUGuNJBa 35AUwX4OhGvSfXPDJDuRjjNlzCFu5dWJoWwi0CRv6zrPcrqPQ5WZHGqURjzJYNaJ zz32PbQVObrs3nxj7UTa9g5eInqtXGnrd//f9BcMgnykgvXpBrtFq/l1oB0oDR/r m1HKiZBlcUqHZ+DqgbhXmRJCtbwuxt25WPMPxSqSzizZVuaKszyYreOOMfhxJFNd SH8kzJ83O4mBeCKozt6WwroHDFq5QRn9ILa/m40CUzci731Wdh3RBt7JXN+Yuc3S i/1kegdeNA== =dX7U -----END PGP SIGNATURE----- Merge tag 'for-6.3/io_uring-2023-02-16' of git://git.kernel.dk/linux Pull io_uring updates from Jens Axboe: - Cleanup series making the async prep and handling of REQ_F_FORCE_ASYNC easier to follow and verify (Dylan) - Enable specifying specific flags for OP_MSG_RING (Breno) - Enable use of KASAN with the internal request cache (Breno) - Split the opcode definition structs into a hot and cold part (Breno) - OP_MSG_RING fixes (Pavel, me) - Fix an issue with IOPOLL cancelation and PREEMPT_NONE (me) - Handle TIF_NOTIFY_RESUME for the io-wq threads that never return to userspace (me) - Add support for using io_uring_register() with a registered ring fd (Josh) - Improve handling of poll on the ring fd (Pavel) - Series improving the task_work handling (Pavel) - Misc cleanups, fixes, improvements (Dmitrii, Quanfa, Richard, Pavel, me) * tag 'for-6.3/io_uring-2023-02-16' of git://git.kernel.dk/linux: (51 commits) io_uring: Support calling io_uring_register with a registered ring fd io_uring,audit: don't log IORING_OP_MADVISE io_uring: mark task TASK_RUNNING before handling resume/task work io_uring: always go async for unsupported open flags io_uring: always go async for unsupported fadvise flags io_uring: for requests that require async, force it io_uring: if a linked request has REQ_F_FORCE_ASYNC then run it async io_uring: add reschedule point to handle_tw_list() io_uring: add a conditional reschedule to the IOPOLL cancelation loop io_uring: return normal tw run linking optimisation io_uring: refactor tctx_task_work io_uring: refactor io_put_task helpers io_uring: refactor req allocation io_uring: improve io_get_sqe io_uring: kill outdated comment about overflow flush io_uring: use user visible tail in io_uring_poll() io_uring: pass in io_issue_def to io_assign_file() io_uring: Enable KASAN for request cache io_uring: handle TIF_NOTIFY_RESUME when checking for task_work io_uring/msg-ring: ensure flags passing works for task_work completions ... |
||
|
Linus Torvalds
|
cd776a4342 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmPvZJwACgkQnJ2qBz9k QNlPcAf/UL7DDv37vnvfcFTa9lRyC0dXsgxnVZUwMU0hJs/ewbmueYGnJSBRTVLG 7ad7bKYQVWsjhas4YulofgRrFWxVDcR32qbC+pDo/X6vGjo4tDl2CNPYREY3n3kN xR6Ca7nPxBH5AVYwwOqBJSTqhWGy1TSDeuskndS0P+YtTv6Y4Zvm4UEiNAXJ4nwo 5Nd+bsPpkrEgQqO/NK2rCXfBfkJr4jAMcp+Nn2zAP44icZAXJYn8QrN3gVL6OZlN RKq36MGQf52lxyufVyFCulWKRbxhEKUS0nURZgAG+Sv87DlSuBJgRVG7xJ1baPpK 2g7wG2jaT7YMfA4PWms/rwAj/CkGLA== =NRh0 -----END PGP SIGNATURE----- Merge tag 'fsnotify_for_v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: "Support for auditing decisions regarding fanotify permission events" * tag 'fsnotify_for_v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fanotify,audit: Allow audit to use the full permission event response fanotify: define struct members to hold response decision context fanotify: Ensure consistent variable type for response |
||
|
Paolo Bonzini
|
4090871d77 |
KVM/arm64 updates for 6.3
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add myself as
co-maintainer
This also drags in a couple of branches to avoid conflicts:
- The shared 'kvm-hw-enable-refactor' branch that reworks
initialization, as it conflicted with the virtual cache topology
changes.
- arm64's 'for-next/sme2' branch, as the PSCI relay changes, as both
touched the EL2 initialization code.
-----BEGIN PGP SIGNATURE-----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=r4s/
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.3
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
|
||
|
Martin KaFai Lau
|
31de4105f0 |
bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup
The bpf_fib_lookup() also looks up the neigh table. This was done before bpf_redirect_neigh() was added. In the use case that does not manage the neigh table and requires bpf_fib_lookup() to lookup a fib to decide if it needs to redirect or not, the bpf prog can depend only on using bpf_redirect_neigh() to lookup the neigh. It also keeps the neigh entries fresh and connected. This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid the double neigh lookup when the bpf prog always call bpf_redirect_neigh() to do the neigh lookup. The params->smac output is skipped together when SKIP_NEIGH is set because bpf_redirect_neigh() will figure out the smac also. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev |
||
|
Luca Boccassi
|
9ec041ea40 |
sed-opal: add support flag for SUM in status ioctl
Not every OPAL drive supports SUM (Single User Mode), so report this information to userspace via the get-status ioctl so that we can adjust the formatting options accordingly. Tested on a kingston drive (which supports it) and a samsung one (which does not). Signed-off-by: Luca Boccassi <bluca@debian.org> Link: https://lore.kernel.org/r/20230210010612.28729-1-luca.boccassi@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jakub Kicinski
|
ca0df43d21 |
Major stack changes:
* EHT channel puncturing support (client & AP)
* some support for AP MLD without mac80211
* fixes for A-MSDU on mesh connections
Major driver changes:
iwlwifi
* EHT rate reporting
* Bump FW API to 74 for AX devices
* STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware
mt76
* switch to using page pool allocator
* mt7996 EHT (Wi-Fi 7) support
* Wireless Ethernet Dispatch (WED) reset support
libertas
* WPS enrollee support
brcmfmac
* Rename Cypress 89459 to BCM4355
* BCM4355 and BCM4377 support
mwifiex
* SD8978 chipset support
rtl8xxxu
* LED support
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
-----BEGIN PGP SIGNATURE-----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=p6+A
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Major stack changes:
* EHT channel puncturing support (client & AP)
* some support for AP MLD without mac80211
* fixes for A-MSDU on mesh connections
Major driver changes:
iwlwifi
* EHT rate reporting
* Bump FW API to 74 for AX devices
* STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware
mt76
* switch to using page pool allocator
* mt7996 EHT (Wi-Fi 7) support
* Wireless Ethernet Dispatch (WED) reset support
libertas
* WPS enrollee support
brcmfmac
* Rename Cypress 89459 to BCM4355
* BCM4355 and BCM4377 support
mwifiex
* SD8978 chipset support
rtl8xxxu
* LED support
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
* tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
wifi: brcmfmac: p2p: Introduce generic flexible array frame member
wifi: mac80211: add documentation for amsdu_mesh_control
wifi: cfg80211: remove gfp parameter from cfg80211_obss_color_collision_notify description
wifi: mac80211: always initialize link_sta with sta
wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta()
wifi: cfg80211: Set SSID if it is not already set
wifi: rtw89: move H2C of del_pkt_offload before polling FW status ready
wifi: rtw89: use readable return 0 in rtw89_mac_cfg_ppdu_status()
wifi: rtw88: usb: drop now unnecessary URB size check
wifi: rtw88: usb: send Zero length packets if necessary
wifi: rtw88: usb: Set qsel correctly
wifi: mac80211: fix off-by-one link setting
wifi: mac80211: Fix for Rx fragmented action frames
wifi: mac80211: avoid u32_encode_bits() warning
wifi: mac80211: Don't translate MLD addresses for multicast
wifi: cfg80211: call reg_notifier for self managed wiphy from driver hint
wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify
wifi: nl80211: Allow authentication frames and set keys on NAN interface
wifi: mac80211: fix non-MLO station association
wifi: mac80211: Allow NSS change only up to capability
...
====================
Link: https://lore.kernel.org/r/20230216105406.208416-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Josh Triplett
|
7d3fd88d61 |
io_uring: Support calling io_uring_register with a registered ring fd
Add a new flag IORING_REGISTER_USE_REGISTERED_RING (set via the high bit of the opcode) to treat the fd as a registered index rather than a file descriptor. This makes it possible for a library to open an io_uring, register the ring fd, close the ring fd, and subsequently use the ring entirely via registered index. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: https://lore.kernel.org/r/f2396369e638284586b069dbddffb8c992afba95.1676419314.git.josh@joshtriplett.org [axboe: remove extra high bit clear] Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Daniel Starke
|
72206cc730 |
tty: n_gsm: add keep alive support
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapters 5.4.6.3.4 and 5.1.8.1.3 describe the test command which can be used to test the mux connection between both sides. Currently, no algorithm is implemented to make use of this command. This requires that each multiplexed upper layer protocol supervises the underlying muxer connection to handle possible connection losses. Introduce ioctl commands and functions to optionally enable keep alive handling via the test command as described in chapter 5.4.6.3.4. A single incrementing octet "ka_num" is being used for unique identification of each single keep alive packet. Retries will use the same "ka_num" value as the original packet. Retry count and interval are taken from the general parameters N2 and T2. Add usage description and basic example for the new ioctl to the n_gsm documentation. Note that support for the test command is mandatory and already present in the muxer implementation since the very first version. Also note that the previous ioctl structure gsm_config cannot be extended due to missing checks against zero of the field "unused". Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230214122737.1976-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Paolo Bonzini
|
e4922088f8 |
* Two more V!=R patches
* The last part of the cmpxchg patches * A few fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEwGNS88vfc9+v45Yq41TmuOI4ufgFAmPkwH0ACgkQ41TmuOI4 ufhrshAAmv9OlCNVsGTmQLpEnGdnxGM2vBPDEygdi+oVHtpMBFn27R3fu295aUR0 v0o3xsSImhaOU03OxWrsLqPanEL5BqnicLwkL4xou3NXXD4Wo0Zrstd3ykfaODhq bTDx7zC2zMQ5J+LPuwDaYUat5R0bHv7cULv1CKLdyISnPGafy0kpUPvC30nymJZi nV7/DjvDYbuOFfhdTEOklGRXvMSEBPLGhIJk/cYZzJECNeNJFUeSs+00uNJ8P6WO BQD/FLWie+Fn6lTGIUhulZCPf65KI4bHHLB6WFXA5Jy+O08urdtLiZwlBC4iNsFV NFIwangpJ/RnupJoOMwQfw31op5SZuiOYn91njaGIiLpHgvA9+iaERsqXtjp8NW7 /ne1TZqtrGbYY71XvZ/yPQU5VGc/MG1CyCGX1CPNSQO7v4yl27BNChxdkBHzzm2u C0IuLZuXl25XwAt8xbdi65fb84pJOeWRU4Zoe4cUZ3drBy5cZsmFXe3lhEAqs7nf MB9XekTLpZ6pCqTE1u/BOrobVg5es/lDQiDeLCvDe1I3I5inSD6ehjJz7qjK0w8o 3pn0rb+Kb4Ijzfi4RNbgJXmBNzkwwSSPPwYt4THHOZtr8p0fZMBeGHqq1wTJmKcq M/+9w4cZqgFpdyNqitj8NyTayX1Lj4LWayexCBYaGkLuHTD6cCk= =HOly -----END PGP SIGNATURE----- Merge tag 'kvm-s390-next-6.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD * Two more V!=R patches * The last part of the cmpxchg patches * A few fixes |
||
|
Paolo Bonzini
|
33436335e9 |
KVM/riscv changes for 6.3
- Fix wrong usage of PGDIR_SIZE to check page sizes - Fix privilege mode setting in kvm_riscv_vcpu_trap_redirect() - Redirect illegal instruction traps to guest - SBI PMU support for guest -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmPifFIACgkQrUjsVaLH LAcEyxAAinMBaBhiPmwWZQvcCzh/UFmJo8BQCwAPuwoc/a4ZGAR7ylzd0oJilP8M wSgX6Ad8XF+CEW2VpxW9nwyi41N25ep1Lrf8vOaWy9L9QNUo0t15WrCIbXT2p399 HrK9fz7HHKKIMsJy+rYb9EepdmMf55xtr1Y/EjyvhoDQbrEMlKsAODYz/SUoriQG Tn3cCYBzLdvzDzu0xXM9v+nsetWXdajK/v4je+mE3NQceXhePAO4oVWP4IpnoROd ZQm3evvVdf0WtKG9curxwMB7jjBqDBFrcLYl0qHGa7pi2o5PzVM7esgaV47KwetH IgA/Mrf1IfzpgM7VYDDax5wUHlKj63KisqU0J8rU3PUloQXaWqv7+ho51t9GzZ/i 9x4uyO/evVntgyTw6HCbqmQJDgEtJiG1ydrR/ydBMYHLnh7LPY2UpKgcqmirtbkK 1/DYDp84vikQ5VW1hc8IACdoBShh9Moh4xsEStzkTrIeHcZCjtORXUh8UIPZ0Mu2 7Mnkktu9I55SLwA3rwH/EYT1ISrOV1G+q3wfqgeLpn8YUWwCIiqWQ5Ur0/WSMJse uJ3HedZDzj9T4n4khX+mKEYh6joAafQZag+4TID2lRSwd0S/mpeC22hYrViMdDmq yhE+JNin/sz4AVaHNzGwfqk2NC2RFl9aRn2X0xTwyBubif9pKMQ= =spUL -----END PGP SIGNATURE----- Merge tag 'kvm-riscv-6.3-1' of https://github.com/kvm-riscv/linux into HEAD KVM/riscv changes for 6.3 - Fix wrong usage of PGDIR_SIZE to check page sizes - Fix privilege mode setting in kvm_riscv_vcpu_trap_redirect() - Redirect illegal instruction traps to guest - SBI PMU support for guest |
||
|
Michael S. Tsirkin
|
b16a1756c7 |
virtio_blk: mark all zone fields LE
zone is a virtio 1.x feature so all fields are LE, they are handled as such, but have mistakenly been labeled __virtioXX in the header. This results in a bunch of sparse warnings. Use the __leXX tags to make sparse happy. Message-Id: <20221222193214.55146-1-mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Dmitry Fomichev
|
95bfec41bd |
virtio-blk: add support for zoned block devices
This patch adds support for Zoned Block Devices (ZBDs) to the kernel virtio-blk driver. The patch accompanies the virtio-blk ZBD support draft that is now being proposed for standardization. The latest version of the draft is linked at https://github.com/oasis-tcs/virtio-spec/issues/143 . The QEMU zoned device code that implements these protocol extensions has been developed by Sam Li and it is currently in review at the QEMU mailing list. A number of virtblk request structure changes has been introduced to accommodate the functionality that is specific to zoned block devices and, most importantly, make room for carrying the Zoned Append sector value from the device back to the driver along with the request status. The zone-specific code in the patch is heavily influenced by NVMe ZNS code in drivers/nvme/host/zns.c, but it is simpler because the proposed virtio ZBD draft only covers the zoned device features that are relevant to the zoned functionality provided by Linux block layer. includes the following fixup: virtio-blk: fix probe without CONFIG_BLK_DEV_ZONED When building without CONFIG_BLK_DEV_ZONED, VIRTIO_BLK_F_ZONED is excluded from array of driver features. As a result virtio_has_feature panics in virtio_check_driver_offered_feature since that by design verifies that a feature we are checking for is listed in the feature array. To fix, replace the call to virtio_has_feature with a stub. Message-Id: <20221016034127.330942-3-dmitry.fomichev@wdc.com> Co-developed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20221220112340.518841-1-mst@redhat.com> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Reported-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Debugged-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Tested-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> |
||
|
Dan Williams
|
5a6fe61fac |
Merge branch 'for-6.3/cxl' into cxl/next
Pick up the AER unmasking patches for v6.3. |
||
|
Dave Jiang
|
248529edc8 |
cxl: add RAS status unmasking for CXL
By default the CXL RAS mask registers bits are defaulted to 1's and suppress all error reporting. If the kernel has negotiated ownership of error handling for CXL then unmask the mask registers by writing 0s. PCI_EXP_DEVCTL capability is checked to see uncorrectable or correctable errors bits are set before unmasking the respective errors. Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_regs.h Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/167639402301.778884.12556849214955646539.stgit@djiang5-mobl3.local Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Greg Kroah-Hartman
|
c4a07e264d |
Merge 6.2-rc8 into usb-next
We need the USB fixes in here for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Vinay Gannevaram
|
9b89495e47 |
wifi: nl80211: Allow authentication frames and set keys on NAN interface
Wi-Fi Aware R4 specification defines NAN Pairing which uses PASN handshake to authenticate the peer and generate keys. Hence allow to register and transmit the PASN authentication frames on NAN interface and set the keys to driver or underlying modules on NAN interface. The driver needs to configure the feature flag NL80211_EXT_FEATURE_SECURE_NAN, which also helps userspace modules to know if the driver supports secure NAN. Signed-off-by: Vinay Gannevaram <quic_vganneva@quicinc.com> Link: https://lore.kernel.org/r/1675519179-24174-1-git-send-email-quic_vganneva@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Aloka Dixit
|
d7c1a9a0ed |
wifi: nl80211: validate and configure puncturing bitmap
- New feature flag, NL80211_EXT_FEATURE_PUNCT, to advertise driver support for preamble puncturing in AP mode. - New attribute, NL80211_ATTR_PUNCT_BITMAP, to receive a puncturing bitmap from the userspace during AP bring up (NL80211_CMD_START_AP) and channel switch (NL80211_CMD_CHANNEL_SWITCH) operations. Each bit corresponds to a 20 MHz channel in the operating bandwidth, lowest bit for the lowest channel. Bit set to 1 indicates that the channel is punctured. Higher 16 bits are reserved. - New members added to structures cfg80211_ap_settings and cfg80211_csa_settings to propagate the bitmap to the driver after validation. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-3-quic_alokad@quicinc.com [move validation against 0xffff into policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Veerendranath Jakkam
|
9a47c1ef5a |
wifi: cfg80211: Authentication offload to user space for MLO connection in STA mode
Currently authentication request event interface doesn't have support to indicate the user space whether it should enable MLO or not during the authentication with the specified AP. But driver needs such capability since the connection is MLO or not decided by the driver in case of SME offload to the driver. Add support for driver to indicate MLD address of the AP in authentication offload request to inform user space to enable MLO during authentication process. Driver shall look at NL80211_ATTR_MLO_SUPPORT flag capability in NL80211_CMD_CONNECT to know whether the user space supports enabling MLO during the authentication offload. User space should enable MLO during the authentication only when it receives the AP MLD address in authentication offload request. User space shouldn't enable MLO if the authentication offload request doesn't indicate the AP MLD address even if the AP is MLO capable. When MLO is enabled, user space should use the MAC address of the interface (on which driver sent request) as self MLD address. User space and driver to use MLD addresses in RA, TA and BSSID fields of the frames between them, and driver translates the MLD addresses to/from link addresses based on the link chosen for the authentication. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230116125058.1604843-1-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Dave Marchevsky
|
9c395c1b99 |
bpf: Add basic bpf_rb_{root,node} support
This patch adds special BPF_RB_{ROOT,NODE} btf_field_types similar to
BPF_LIST_{HEAD,NODE}, adds the necessary plumbing to detect the new
types, and adds bpf_rb_root_free function for freeing bpf_rb_root in
map_values.
structs bpf_rb_root and bpf_rb_node are opaque types meant to
obscure structs rb_root_cached rb_node, respectively.
btf_struct_access will prevent BPF programs from touching these special
fields automatically now that they're recognized.
btf_check_and_fixup_fields now groups list_head and rb_root together as
"graph root" fields and {list,rb}_node as "graph node", and does same
ownership cycle checking as before. Note that this function does _not_
prevent ownership type mixups (e.g. rb_root owning list_node) - that's
handled by btf_parse_graph_root.
After this patch, a bpf program can have a struct bpf_rb_root in a
map_value, but not add anything to nor do anything useful with it.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Oliver Upton
|
619cec0085 |
Merge branch arm64/for-next/sme2 into kvmarm/next
Merge the SME2 branch to fix up a rather annoying conflict due to the EL2 finalization refactor. Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Oleksij Rempel
|
022c3f87f8 |
net: phy: add genphy_c45_ethtool_get/set_eee() support
Add replacement for phy_ethtool_get/set_eee() functions. Current phy_ethtool_get/set_eee() implementation is great and it is possible to make it even better: - this functionality is for devices implementing parts of IEEE 802.3 specification beyond Clause 22. The better place for this code is phy-c45.c - currently it is able to do read/write operations on PHYs with different abilities to not existing registers. It is better to use stored supported_eee abilities to avoid false read/write operations. - the eee_active detection will provide wrong results on not supported link modes. It is better to validate speed/duplex properties against supported EEE link modes. - it is able to support only limited amount of link modes. We have more EEE link modes... By refactoring this code I address most of this point except of the last one. Adding additional EEE link modes will need more work. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Shannon Nelson
|
5b4e9a7a71 |
net: ethtool: extend ringparam set/get APIs for rx_push
Similar to what was done for TX_PUSH, add an RX_PUSH concept to the ethtool interfaces. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Dan Williams
|
dfd423e0a3 |
Merge branch 'for-6.3/cxl' into cxl/next
Pick up some final miscellaneous updates for v6.3 including support for communicating 'exclusive' and 'enabled' state of commands. |
||
|
Ira Weiny
|
af73370dcb |
cxl/mem: Fix UAPI command comment
The command comment had grammatical errors. In an attempt to fix those it was noted that the comment and the query command were not in sync. Now that the query command returns excluded and device unsupported command information. Update the kdoc and fix the grammatical errors. [1] https://lore.kernel.org/all/63b4ec4e37cc1_5178e2941d@dwillia2-xfh.jf.intel.com.notmuch/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20221222-cxl-misc-v4-4-62f701c1cdd1@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Ira Weiny
|
814a15f3b4 |
cxl/uapi: Tag commands from cxl_query_cmd()
It was pointed out that commands not supported by the device or excluded by the kernel were being returned in cxl_query_cmd().[1] While libcxl correctly handles failing commands, it is more efficient to not issue an invalid command in the first place. This can't be done without additional information being returned from cxl_query_cmd(). In addition, information about the availability of commands can be useful for debugging. Add flags to struct cxl_command_info which reflect if a command is enabled and/or exclusive to the kernel. [1] https://lore.kernel.org/all/63b4ec4e37cc1_5178e2941d@dwillia2-xfh.jf.intel.com.notmuch/ Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20221222-cxl-misc-v4-3-62f701c1cdd1@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Ira Weiny
|
11ef026e46 |
cxl/uapi: Add warning on CXL command enum
The CXL command enum is exported to user space and must maintain backwards compatibility. Add comment that new defines must be added to the end of the list. Suggested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20221222-cxl-misc-v4-2-62f701c1cdd1@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Jakub Kicinski
|
de42873367 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY+bZrwAKCRDbK58LschI gzi4AP4+TYo0jnSwwkrOoN9l4f5VO9X8osmj3CXfHBv7BGWVxAD/WnvA3TDZyaUd agIZTkRs6BHF9He8oROypARZxTeMLwM= =nO1C -----END PGP SIGNATURE----- Daniel Borkmann says: ==================== pull-request: bpf-next 2023-02-11 We've added 96 non-merge commits during the last 14 day(s) which contain a total of 152 files changed, 4884 insertions(+), 962 deletions(-). There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c between commit |
||
|
Catalin Marinas
|
156010ed9c |
Merge branches 'for-next/sysreg', 'for-next/sme', 'for-next/kselftest', 'for-next/misc', 'for-next/sme2', 'for-next/tpidr2', 'for-next/scs', 'for-next/compat-hwcap', 'for-next/ftrace', 'for-next/efi-boot-mmu-on', 'for-next/ptrauth' and 'for-next/pseudo-nmi', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable perf: arm_spe: Support new SPEv1.2/v8.7 'not taken' event perf: arm_spe: Use new PMSIDR_EL1 register enums perf: arm_spe: Drop BIT() and use FIELD_GET/PREP accessors arm64/sysreg: Convert SPE registers to automatic generation arm64: Drop SYS_ from SPE register defines perf: arm_spe: Use feature numbering for PMSEVFR_EL1 defines perf/marvell: Add ACPI support to TAD uncore driver perf/marvell: Add ACPI support to DDR uncore driver perf/arm-cmn: Reset DTM_PMU_CONFIG at probe drivers/perf: hisi: Extract initialization of "cpa_pmu->pmu" drivers/perf: hisi: Simplify the parameters of hisi_pmu_init() drivers/perf: hisi: Advertise the PERF_PMU_CAP_NO_EXCLUDE capability * for-next/sysreg: : arm64 sysreg and cpufeature fixes/updates KVM: arm64: Use symbolic definition for ISR_EL1.A arm64/sysreg: Add definition of ISR_EL1 arm64/sysreg: Add definition for ICC_NMIAR1_EL1 arm64/cpufeature: Remove 4 bit assumption in ARM64_FEATURE_MASK() arm64/sysreg: Fix errors in 32 bit enumeration values arm64/cpufeature: Fix field sign for DIT hwcap detection * for-next/sme: : SME-related updates arm64/sme: Optimise SME exit on syscall entry arm64/sme: Don't use streaming mode to probe the maximum SME VL arm64/ptrace: Use system_supports_tpidr2() to check for TPIDR2 support * for-next/kselftest: (23 commits) : arm64 kselftest fixes and improvements kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context kselftest/arm64: Fix enumeration of systems without 128 bit SME for SSVE+ZA kselftest/arm64: Fix enumeration of systems without 128 bit SME kselftest/arm64: Don't require FA64 for streaming SVE tests kselftest/arm64: Limit the maximum VL we try to set via ptrace kselftest/arm64: Correct buffer size for SME ZA storage kselftest/arm64: Remove the local NUM_VL definition kselftest/arm64: Verify simultaneous SSVE and ZA context generation kselftest/arm64: Verify that SSVE signal context has SVE_SIG_FLAG_SM set kselftest/arm64: Remove spurious comment from MTE test Makefile kselftest/arm64: Support build of MTE tests with clang kselftest/arm64: Initialise current at build time in signal tests kselftest/arm64: Don't pass headers to the compiler as source kselftest/arm64: Remove redundant _start labels from FP tests kselftest/arm64: Fix .pushsection for strings in FP tests kselftest/arm64: Run BTI selftests on systems without BTI kselftest/arm64: Fix test numbering when skipping tests kselftest/arm64: Skip non-power of 2 SVE vector lengths in fp-stress kselftest/arm64: Only enumerate power of two VLs in syscall-abi ... * for-next/misc: : Miscellaneous arm64 updates arm64/mm: Intercept pfn changes in set_pte_at() Documentation: arm64: correct spelling arm64: traps: attempt to dump all instructions arm64: Apply dynamic shadow call stack patching in two passes arm64: el2_setup.h: fix spelling typo in comments arm64: Kconfig: fix spelling arm64: cpufeature: Use kstrtobool() instead of strtobool() arm64: Avoid repeated AA64MMFR1_EL1 register read on pagefault path arm64: make ARCH_FORCE_MAX_ORDER selectable * for-next/sme2: (23 commits) : Support for arm64 SME 2 and 2.1 arm64/sme: Fix __finalise_el2 SMEver check kselftest/arm64: Remove redundant _start labels from zt-test kselftest/arm64: Add coverage of SME 2 and 2.1 hwcaps kselftest/arm64: Add coverage of the ZT ptrace regset kselftest/arm64: Add SME2 coverage to syscall-abi kselftest/arm64: Add test coverage for ZT register signal frames kselftest/arm64: Teach the generic signal context validation about ZT kselftest/arm64: Enumerate SME2 in the signal test utility code kselftest/arm64: Cover ZT in the FP stress test kselftest/arm64: Add a stress test program for ZT0 arm64/sme: Add hwcaps for SME 2 and 2.1 features arm64/sme: Implement ZT0 ptrace support arm64/sme: Implement signal handling for ZT arm64/sme: Implement context switching for ZT0 arm64/sme: Provide storage for ZT0 arm64/sme: Add basic enumeration for SME2 arm64/sme: Enable host kernel to access ZT0 arm64/sme: Manually encode ZT0 load and store instructions arm64/esr: Document ISS for ZT0 being disabled arm64/sme: Document SME 2 and SME 2.1 ABI ... * for-next/tpidr2: : Include TPIDR2 in the signal context kselftest/arm64: Add test case for TPIDR2 signal frame records kselftest/arm64: Add TPIDR2 to the set of known signal context records arm64/signal: Include TPIDR2 in the signal context arm64/sme: Document ABI for TPIDR2 signal information * for-next/scs: : arm64: harden shadow call stack pointer handling arm64: Stash shadow stack pointer in the task struct on interrupt arm64: Always load shadow stack pointer directly from the task struct * for-next/compat-hwcap: : arm64: Expose compat ARMv8 AArch32 features (HWCAPs) arm64: Add compat hwcap SSBS arm64: Add compat hwcap SB arm64: Add compat hwcap I8MM arm64: Add compat hwcap ASIMDBF16 arm64: Add compat hwcap ASIMDFHM arm64: Add compat hwcap ASIMDDP arm64: Add compat hwcap FPHP and ASIMDHP * for-next/ftrace: : Add arm64 support for DYNAMICE_FTRACE_WITH_CALL_OPS arm64: avoid executing padding bytes during kexec / hibernation arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS arm64: ftrace: Update stale comment arm64: patching: Add aarch64_insn_write_literal_u64() arm64: insn: Add helpers for BTI arm64: Extend support for CONFIG_FUNCTION_ALIGNMENT ACPI: Don't build ACPICA with '-Os' Compiler attributes: GCC cold function alignment workarounds ftrace: Add DYNAMIC_FTRACE_WITH_CALL_OPS * for-next/efi-boot-mmu-on: : Permit arm64 EFI boot with MMU and caches on arm64: kprobes: Drop ID map text from kprobes blacklist arm64: head: Switch endianness before populating the ID map efi: arm64: enter with MMU and caches enabled arm64: head: Clean the ID map and the HYP text to the PoC if needed arm64: head: avoid cache invalidation when entering with the MMU on arm64: head: record the MMU state at primary entry arm64: kernel: move identity map out of .text mapping arm64: head: Move all finalise_el2 calls to after __enable_mmu * for-next/ptrauth: : arm64 pointer authentication cleanup arm64: pauth: don't sign leaf functions arm64: unify asm-arch manipulation * for-next/pseudo-nmi: : Pseudo-NMI code generation optimisations arm64: irqflags: use alternative branches for pseudo-NMI logic arm64: add ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap arm64: make ARM64_HAS_GIC_PRIO_MASKING depend on ARM64_HAS_GIC_CPUIF_SYSREGS arm64: rename ARM64_HAS_IRQ_PRIO_MASKING to ARM64_HAS_GIC_PRIO_MASKING arm64: rename ARM64_HAS_SYSREG_GIC_CPUIF to ARM64_HAS_GIC_CPUIF_SYSREGS |
||
|
Jakub Kicinski
|
8697a258ae |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
net/devlink/leftover.c / net/core/devlink.c: |
||
|
Steve Sistare
|
ef3a3f6a29 |
vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR
Disable the VFIO_UPDATE_VADDR capability if mediated devices are present.
Their kernel threads could be blocked indefinitely by a misbehaving
userland while trying to pin/unpin pages while vaddrs are being updated.
Do not allow groups to be added to the container while vaddr's are invalid,
so we never need to block user threads from pinning, and can delete the
vaddr-waiting code in a subsequent patch.
Fixes:
|
||
|
Mauro Carvalho Chehab
|
94817983fb |
Linux 6.2-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPgG/geHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGidAH/j0pUbmniNM3aft8 5O1XxltlOZgqxju8OQhkiuX9VnQuuSeTNhAuj6jfcQOLpXDvlKsVfrpBxEfXalML yead9QAy/OT3hNGQxifMQzGbsmaWH1kgxxnv2lKo2eNP5KYZ+rec+IgtQhgX9quN q/N/ymd2/ju9AEOVRYwG1PD1EiIwTd3xPfBZl4Z35J+Ym+6NRrlXmN6J9LwslXmJ /P4cwgdf9/TuYAB96EshRHsZ4Tk/Gxkn15uyhLaWBmrZ/LAF5JGbClEfFlCWgjwv F5SGv3F+O6HSv49W9a24XtenE+3tw78AbCdqKZyzbb2whhv1eY99vKSbGnCahc/y O0VBP/g= =YoPk -----END PGP SIGNATURE----- Merge tag 'v6.2-rc7' into media_tree Linux 6.2-rc7 * tag 'v6.2-rc7': (1549 commits) Linux 6.2-rc7 fbcon: Check font dimension limits efi: fix potential NULL deref in efi_mem_reserve_persistent kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup() HV: hv_balloon: fix memory leak with using debugfs_lookup() mtk_sgmii: enable PCS polling to allow SFP work net: mediatek: sgmii: fix duplex configuration net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration MAINTAINERS: update SCTP maintainers MAINTAINERS: ipv6: retire Hideaki Yoshifuji mailmap: add John Crispin's entry MAINTAINERS: bonding: move Veaceslav Falico to CREDITS net: openvswitch: fix flow memory leak in ovs_flow_cmd_new net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC virtio-net: Keep stop() to follow mirror sequence of open() efi: Accept version 2 of memory attributes table ceph: blocklist the kclient when receiving corrupted snap trace ceph: move mount state enum to super.h selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs ... |
||
|
Daniel Starke
|
9bd6dcb8cc |
tty: n_gsm: mark unusable ioctl structure fields accordingly
gsm_config and gsm_netconfig includes unused fields that have been included to allow future extension without changing the structure size. Unfortunately, no checks have been included for these field. The actual value set by old user space code remains undefined. This means that future extensions can not use these fields without breaking old user space code which may set unexpected values. Mark these fields accordingly to avoid breaking code changes. Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230206114606.2133-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Kumaravel Thiagarajan
|
32bb477fa7 |
serial: 8250_pci1xxxx: Add driver for quad-uart support
pci1xxxx is a PCIe switch with a multi-function endpoint on one of its downstream ports. Quad-uart is one of the functions in the multi-function endpoint. This driver loads for the quad-uart and enumerates single or multiple instances of uart based on the PCIe subsystem device ID. Co-developed-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com> Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com> Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230207164814.3104605-3-kumaravel.thiagarajan@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Janis Schoetterl-Glausch
|
3fd49805d1 |
KVM: s390: Extend MEM_OP ioctl by storage key checked cmpxchg
User space can use the MEM_OP ioctl to make storage key checked reads and writes to the guest, however, it has no way of performing atomic, key checked, accesses to the guest. Extend the MEM_OP ioctl in order to allow for this, by adding a cmpxchg op. For now, support this op for absolute accesses only. This op can be used, for example, to set the device-state-change indicator and the adapter-local-summary indicator atomically. Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20230206164602.138068-13-scgl@linux.ibm.com Message-Id: <20230206164602.138068-13-scgl@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> |
||
|
Richard Guy Briggs
|
70529a1995 |
fanotify: define struct members to hold response decision context
This patch adds a flag, FAN_INFO and an extensible buffer to provide additional information about response decisions. The buffer contains one or more headers defining the information type and the length of the following information. The patch defines one additional information type, FAN_RESPONSE_INFO_AUDIT_RULE, to audit a rule number. This will allow for the creation of other information types in the future if other users of the API identify different needs. The kernel can be tested if it supports a given info type by supplying the complete info extension but setting fd to FAN_NOFD. It will return the expected size but not issue an audit record. Suggested-by: Steve Grubb <sgrubb@redhat.com> Link: https://lore.kernel.org/r/2745105.e9J7NaK4W3@x2 Suggested-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201001101219.GE17860@quack2.suse.cz Tested-by: Steve Grubb <sgrubb@redhat.com> Acked-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <10177cfcae5480926b7176321a28d9da6835b667.1675373475.git.rgb@redhat.com> |
||
|
Rob Herring
|
09519ec3b1 |
perf: Add perf_event_attr::config3
Arm SPEv1.2 adds another 64-bits of event filtering control. As the existing perf_event_attr::configN fields are all used up for SPE PMU, an additional field is needed. Add a new 'config3' field. Tested-by: James Clark <james.clark@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220825-arm-spe-v8-7-v4-7-327f860daf28@kernel.org Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Daniel Scally
|
e16cab9c15 |
usb: uvc: Enumerate valid values for color matching
The color matching descriptors defined in the UVC Specification contain 3 fields with discrete numeric values representing particular settings. Enumerate those values so that later code setting them can be more readable. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Link: https://lore.kernel.org/r/20230202114142.300858-2-dan.scally@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
f6b2ce79b5 |
Merge 6.2-rc7 into tty-next
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Herton R. Krzesinski
|
03702d4d29 |
uapi: add missing ip/ipv6 header dependencies for linux/stddef.h
Since commit |
||
|
Petr Machata
|
a1aee20d5d |
net: bridge: Add netlink knobs for number / maximum MDB entries
The previous patch added accounting for number of MDB entries per port and
per port-VLAN, and the logic to verify that these values stay within
configured bounds. However it didn't provide means to actually configure
those bounds or read the occupancy. This patch does that.
Two new netlink attributes are added for the MDB occupancy:
IFLA_BRPORT_MCAST_N_GROUPS for the per-port occupancy and
BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS for the per-port-VLAN occupancy.
And another two for the maximum number of MDB entries:
IFLA_BRPORT_MCAST_MAX_GROUPS for the per-port maximum, and
BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS for the per-port-VLAN one.
Note that the two new IFLA_BRPORT_ attributes prompt bumping of
RTNL_SLAVE_MAX_TYPE to size the slave attribute tables large enough.
The new attributes are used like this:
# ip link add name br up type bridge vlan_filtering 1 mcast_snooping 1 \
mcast_vlan_snooping 1 mcast_querier 1
# ip link set dev v1 master br
# bridge vlan add dev v1 vid 2
# bridge vlan set dev v1 vid 1 mcast_max_groups 1
# bridge mdb add dev br port v1 grp 230.1.2.3 temp vid 1
# bridge mdb add dev br port v1 grp 230.1.2.4 temp vid 1
Error: bridge: Port-VLAN is already in 1 groups, and mcast_max_groups=1.
# bridge link set dev v1 mcast_max_groups 1
# bridge mdb add dev br port v1 grp 230.1.2.3 temp vid 2
Error: bridge: Port is already in 1 groups, and mcast_max_groups=1.
# bridge -d link show
5: v1@v2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br [...]
[...] mcast_n_groups 1 mcast_max_groups 1
# bridge -d vlan show
port vlan-id
br 1 PVID Egress Untagged
state forwarding mcast_router 1
v1 1 PVID Egress Untagged
[...] mcast_n_groups 1 mcast_max_groups 1
2
[...] mcast_n_groups 0 mcast_max_groups 0
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Greg Kroah-Hartman
|
d38e781ea0 |
Linux 6.2-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPgG/geHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGidAH/j0pUbmniNM3aft8 5O1XxltlOZgqxju8OQhkiuX9VnQuuSeTNhAuj6jfcQOLpXDvlKsVfrpBxEfXalML yead9QAy/OT3hNGQxifMQzGbsmaWH1kgxxnv2lKo2eNP5KYZ+rec+IgtQhgX9quN q/N/ymd2/ju9AEOVRYwG1PD1EiIwTd3xPfBZl4Z35J+Ym+6NRrlXmN6J9LwslXmJ /P4cwgdf9/TuYAB96EshRHsZ4Tk/Gxkn15uyhLaWBmrZ/LAF5JGbClEfFlCWgjwv F5SGv3F+O6HSv49W9a24XtenE+3tw78AbCdqKZyzbb2whhv1eY99vKSbGnCahc/y O0VBP/g= =YoPk -----END PGP SIGNATURE----- Merge 6.2-rc7 into char-misc-next We need the char-misc driver fixes in here as other patches depend on them. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
924fb3ec50 |
Merge 6.2-rc7 into usb-next
We need the USB fixes in here, and this resolves a merge conflict with the i915 driver as reported in linux-next Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Florian Lehner
|
17c9b4e1a7 |
bpf: fix typo in header for bpf_perf_prog_read_value
Fix a simple typo in the documentation for bpf_perf_prog_read_value. Signed-off-by: Florian Lehner <dev@der-flo.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20230203121439.25884-1-dev@der-flo.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
|
Joey Gouly
|
b507808ebc |
mm: implement memory-deny-write-execute as a prctl
Patch series "mm: In-kernel support for memory-deny-write-execute (MDWE)", v2. The background to this is that systemd has a configuration option called MemoryDenyWriteExecute [2], implemented as a SECCOMP BPF filter. Its aim is to prevent a user task from inadvertently creating an executable mapping that is (or was) writeable. Since such BPF filter is stateless, it cannot detect mappings that were previously writeable but subsequently changed to read-only. Therefore the filter simply rejects any mprotect(PROT_EXEC). The side-effect is that on arm64 with BTI support (Branch Target Identification), the dynamic loader cannot change an ELF section from PROT_EXEC to PROT_EXEC|PROT_BTI using mprotect(). For libraries, it can resort to unmapping and re-mapping but for the main executable it does not have a file descriptor. The original bug report in the Red Hat bugzilla - [3] - and subsequent glibc workaround for libraries - [4]. This series adds in-kernel support for this feature as a prctl PR_SET_MDWE, that is inherited on fork(). The prctl denies PROT_WRITE | PROT_EXEC mappings. Like the systemd BPF filter it also denies adding PROT_EXEC to mappings. However unlike the BPF filter it only denies it if the mapping didn't previous have PROT_EXEC. This allows to PROT_EXEC -> PROT_EXEC | PROT_BTI with mprotect(), which is a problem with the BPF filter. This patch (of 2): The aim of such policy is to prevent a user task from creating an executable mapping that is also writeable. An example of mmap() returning -EACCESS if the policy is enabled: mmap(0, size, PROT_READ | PROT_WRITE | PROT_EXEC, flags, 0, 0); Similarly, mprotect() would return -EACCESS below: addr = mmap(0, size, PROT_READ | PROT_EXEC, flags, 0, 0); mprotect(addr, size, PROT_READ | PROT_WRITE | PROT_EXEC); The BPF filter that systemd MDWE uses is stateless, and disallows mprotect() with PROT_EXEC completely. This new prctl allows PROT_EXEC to be enabled if it was already PROT_EXEC, which allows the following case: addr = mmap(0, size, PROT_READ | PROT_EXEC, flags, 0, 0); mprotect(addr, size, PROT_READ | PROT_EXEC | PROT_BTI); where PROT_BTI enables branch tracking identification on arm64. Link: https://lkml.kernel.org/r/20230119160344.54358-1-joey.gouly@arm.com Link: https://lkml.kernel.org/r/20230119160344.54358-2-joey.gouly@arm.com Signed-off-by: Joey Gouly <joey.gouly@arm.com> Co-developed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jeremy Linton <jeremy.linton@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Mark Brown <broonie@kernel.org> Cc: nd <nd@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Szabolcs Nagy <szabolcs.nagy@arm.com> Cc: Topi Miettinen <toiwoton@gmail.com> Cc: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Jakub Kicinski
|
d3d854fd6a |
netdev-genl: create a simple family for netdev stuff
Add a Netlink spec-compatible family for netdevs.
This is a very simple implementation without much
thought going into it.
It allows us to reap all the benefits of Netlink specs,
one can use the generic client to issue the commands:
$ ./cli.py --spec netdev.yaml --dump dev_get
[{'ifindex': 1, 'xdp-features': set()},
{'ifindex': 2, 'xdp-features': {'basic', 'ndo-xmit', 'redirect'}},
{'ifindex': 3, 'xdp-features': {'rx-sg'}}]
the generic python library does not have flags-by-name
support, yet, but we also don't have to carry strings
in the messages, as user space can get the names from
the spec.
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/327ad9c9868becbe1e601b580c962549c8cd81f2.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Xin Long
|
9eefedd58a |
net: add gso_ipv4_max_size and gro_ipv4_max_size per device
This patch introduces gso_ipv4_max_size and gro_ipv4_max_size per device and adds netlink attributes for them, so that IPV4 BIG TCP can be guarded by a separate tunable in the next patch. To not break the old application using "gso/gro_max_size" for IPv4 GSO packets, this patch updates "gso/gro_ipv4_max_size" in netif_set_gso/gro_max_size() if the new size isn't greater than GSO_LEGACY_MAX_SIZE, so that nothing will change even if userspace doesn't realize the new netlink attributes. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Xin Long
|
8e08bb75b6 |
packet: add TP_STATUS_GSO_TCP for tp_status
Introduce TP_STATUS_GSO_TCP tp_status flag to tell the af_packet user that this is a TCP GSO packet. When parsing IPv4 BIG TCP packets in tcpdump/libpcap, it can use tp_len as the IPv4 packet len when this flag is set, as iph tot_len is set to 0 for IPv4 BIG TCP packets. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Andy Shevchenko
|
5e6a51787f |
uuid: Decouple guid_t and uuid_le types and respective macros
The guid_t type and respective macros are being used internally only. The uuid_le has its user outside the kernel. Decouple these types and macros, and make guid_t completely internal type to the kernel. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230124133838.22645-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ingo Molnar
|
57a30218fa |
Linux 6.2-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPW7E8eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGf7MIAI0JnHN9WvtEukSZ E6j6+cEGWxsvD6q0g3GPolaKOCw7hlv0pWcFJFcUAt0jebspMdxV2oUGJ8RYW7Lg nCcHvEVswGKLAQtQSWw52qotW6fUfMPsNYYB5l31sm1sKH4Cgss0W7l2HxO/1LvG TSeNHX53vNAZ8pVnFYEWCSXC9bzrmU/VALF2EV00cdICmfvjlgkELGXoLKJJWzUp s63fBHYGGURSgwIWOKStoO6HNo0j/F/wcSMx8leY8qDUtVKHj4v24EvSgxUSDBER ch3LiSQ6qf4sw/z7pqruKFthKOrlNmcc0phjiES0xwwGiNhLv0z3rAhc4OM2cgYh SDc/Y/c= =zpaD -----END PGP SIGNATURE----- Merge tag 'v6.2-rc6' into sched/core, to pick up fixes Pick up fixes before merging another batch of cpuidle updates. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Daniel Vetter
|
aebd8f0c6f |
Linux 6.2-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPW7E8eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGf7MIAI0JnHN9WvtEukSZ E6j6+cEGWxsvD6q0g3GPolaKOCw7hlv0pWcFJFcUAt0jebspMdxV2oUGJ8RYW7Lg nCcHvEVswGKLAQtQSWw52qotW6fUfMPsNYYB5l31sm1sKH4Cgss0W7l2HxO/1LvG TSeNHX53vNAZ8pVnFYEWCSXC9bzrmU/VALF2EV00cdICmfvjlgkELGXoLKJJWzUp s63fBHYGGURSgwIWOKStoO6HNo0j/F/wcSMx8leY8qDUtVKHj4v24EvSgxUSDBER ch3LiSQ6qf4sw/z7pqruKFthKOrlNmcc0phjiES0xwwGiNhLv0z3rAhc4OM2cgYh SDc/Y/c= =zpaD -----END PGP SIGNATURE----- Merge v6.2-rc6 into drm-next Due to holidays we started -next with more -fixes in-flight than usual, and people have been asking where they are. Backmerge to get things better in sync. Conflicts: - Tiny conflict in drm_fbdev_generic.c between variable rename and missing error handling that got added. - Conflict in drm_fb_helper.c between the added call to vgaswitcheroo in drm_fb_helper_single_fb_probe and a refactor patch that extracted lots of helpers and incidentally removed the dev local variable. Readd it to make things compile. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> |
||
|
Greg Kroah-Hartman
|
745656a39e |
uvcvideo fixes and improvements
-----BEGIN PGP SIGNATURE----- iJgEABYKAEAWIQTAnvhxs4J7QT+XHKnMPy2AAyfeZAUCY8R0CCIcbGF1cmVudC5w aW5jaGFydEBpZGVhc29uYm9hcmQuY29tAAoJEMw/LYADJ95k3XwBAMn3MAcX185i DNPc1tWKCA0+j7eLqgCrNHOQgqYSV7ZOAQDaoDt/drJffp8S9TdCpP1DhT9wcSIB i6i6j7mlzGsqBw== =yAlT -----END PGP SIGNATURE----- Merge tag 'media-uvc-next-20230115' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into usb-next Merge in this tag from the media tree so that future USB uvc patches will apply properly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'media-uvc-next-20230115' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux: (27 commits) media: uvcvideo: Silence memcpy() run-time false positive warnings media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910 media: uvcvideo: Fix race condition with usb_kill_urb media: uvcvideo: Use standard names for menus media: uvcvideo: Fix power line control for Lenovo Integrated Camera media: uvcvideo: Refactor power_line_frequency_controls_limited media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU media: uvcvideo: Extend documentation of uvc_video_clock_decode() media: uvcvideo: Limit power line control for Acer EasyCamera media: uvcvideo: Refactor __uvc_ctrl_add_mapping media: uvcvideo: Fix handling on Bitmask controls media: uvcvideo: Do not return positive errors in uvc_query_ctrl() media: uvcvideo: Return -EACCES for Wrong state error media: uvcvideo: Improve error logging in uvc_query_ctrl() media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible() media: uvcvideo: Factor out usb_string() calls media: uvcvideo: Limit power line control for Acer EasyCamera media: uvcvideo: Recover stalled ElGato devices media: uvcvideo: Remove void casting for the status endpoint ... |
||
|
David S. Miller
|
5dd3beba22 |
This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich - drop prandom.h includes, by Sven Eckelmann - fix mailing list address, by Sven Eckelmann - multicast feature preparation, by Linus Lüssing (2 patches) -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAmPTpRsWHHN3QHNpbW9u d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoZWoEAC7F92qmyNAye5ylC4O7XeG5KXL tPHzOSp5n5Q98HOmLGrqgOTEgfoX8q/GkAQh4lauiG5LPhs8iOYfHhiz5u0rXXnv Dm26PCLTKxOd+nif2H28rh4ahzgZUSizQgtg3S6tiYAvvTc8TM67UbJpPkU3sXf6 Xh9gT7W5YvZ8lvEQF/l/otdhuE3jpiBgjzyfDKTyLlVweWgli4XZSZ9BqIhv8c/O gSa6vp72FGyJEZJCHyXh4jD1yNU/S+CRFpj6Gy1OsqLVMnNVlJviwEyVJ+ZuzSw2 KSOeeUXxN4XjeDulIOPgvvxFRsAPCeNoGqOzHtlLgEugyZGowKY9q5Bh33K63A7t YzayKnfq2CKAVg9VujePurGkiMTY5gjrtuS7KlcWxXn30V8rry3bN6Y8XLphr80A p1fVYjPQtFhbjjrrmsKbGSCmJiNo+jx2Rs6y1aQ86ykNVK3Et6rSUrISaMRjZEEG OIMGOkzE0ESH2yK99sdaHOKiauZIMPMHTK7rB53cSMCL2eyP+6wP1jGQFwiytaA6 9GzMD8w8LVrJQc7PjkYP6f75iFKxtWzpf8RzwePhZFiRGVBROW0+6ECv6NAx2ImG PoMYcqy0EV3ffwUhNnWtML+f4keqBaOKXa63GyWGBKymHLr5yLBzyvjgsr9jMJNb 3Sj/qf7JQy908jSxQQ== =yGYm -----END PGP SIGNATURE----- Merge tag 'batadv-next-pullrequest-20230127' of git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - drop prandom.h includes, by Sven Eckelmann - fix mailing list address, by Sven Eckelmann - multicast feature preparation, by Linus Lüssing (2 patches) ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Dave Airlie
|
54587d9943 |
Renesas R-Car DU fixes and improvements
-----BEGIN PGP SIGNATURE----- iJgEABYKAEAWIQTAnvhxs4J7QT+XHKnMPy2AAyfeZAUCY9QAUiIcbGF1cmVudC5w aW5jaGFydEBpZGVhc29uYm9hcmQuY29tAAoJEMw/LYADJ95kIlUA/ijw+E7QMW7w CbBfyFN+juM44qzpXhU14mdqcMmUmhYvAP9DyX3yxcwdwu3UMIiHHy04cH7Elwv5 IO+EaGLUOxfIDg== =3wyo -----END PGP SIGNATURE----- Merge tag 'drm-next-20230127' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into drm-next Renesas R-Car DU fixes and improvements Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y9QCw3SkHm6k1bwJ@pendragon.ideasonboard.com |
||
|
Ming Lei
|
4093cb5a06 |
ublk_drv: add mechanism for supporting unprivileged ublk device
unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Ming Lei
|
abb864d380 |
ublk_drv: add device parameter UBLK_PARAM_TYPE_DEVT
Userspace side only knows device ID, but the associated path of ublkc* and ublkb* could be changed by udev, and that depends on userspace's policy, so add parameter of UBLK_PARAM_TYPE_DEVT for retrieving major/minor of the ublkc* and ublkb*, then user may figure out major/minor of the ublk disks he/she owns. With major/minor, it is easy to find the device node path. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-5-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Breno Leitao
|
cbeb47a7b5 |
io_uring/msg_ring: Pass custom flags to the cqe
This patch adds a new flag (IORING_MSG_RING_FLAGS_PASS) in the message ring operations (IORING_OP_MSG_RING). This new flag enables the sender to specify custom flags, which will be copied over to cqe->flags in the receiving ring. These custom flags should be specified using the sqe->file_index field. This mechanism provides additional flexibility when sending messages between rings. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20230103160507.617416-1-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jakub Kicinski
|
2d104c390f |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY9RqJgAKCRDbK58LschI gw2IAP9G5uhFO5abBzYLupp6SY3T5j97MUvPwLfFqUEt7EXmuwEA2lCUEWeW0KtR QX+QmzCa6iHxrW7WzP4DUYLue//FJQY= =yYqA -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== bpf-next 2023-01-28 We've added 124 non-merge commits during the last 22 day(s) which contain a total of 124 files changed, 6386 insertions(+), 1827 deletions(-). The main changes are: 1) Implement XDP hints via kfuncs with initial support for RX hash and timestamp metadata kfuncs, from Stanislav Fomichev and Toke Høiland-Jørgensen. Measurements on overhead: https://lore.kernel.org/bpf/875yellcx6.fsf@toke.dk 2) Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case, from Andrii Nakryiko. 3) Significantly reduce the search time for module symbols by livepatch and BPF, from Jiri Olsa and Zhen Lei. 4) Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals, from David Vernet. 5) Fix several issues in the dynptr processing such as stack slot liveness propagation, missing checks for PTR_TO_STACK variable offset, etc, from Kumar Kartikeya Dwivedi. 6) Various performance improvements, fixes, and introduction of more than just one XDP program to XSK selftests, from Magnus Karlsson. 7) Big batch to BPF samples to reduce deprecated functionality, from Daniel T. Lee. 8) Enable struct_ops programs to be sleepable in verifier, from David Vernet. 9) Reduce pr_warn() noise on BTF mismatches when they are expected under the CONFIG_MODULE_ALLOW_BTF_MISMATCH config anyway, from Connor O'Brien. 10) Describe modulo and division by zero behavior of the BPF runtime in BPF's instruction specification document, from Dave Thaler. 11) Several improvements to libbpf API documentation in libbpf.h, from Grant Seltzer. 12) Improve resolve_btfids header dependencies related to subcmd and add proper support for HOSTCC, from Ian Rogers. 13) Add ipip6 and ip6ip decapsulation support for bpf_skb_adjust_room() helper along with BPF selftests, from Ziyang Xuan. 14) Simplify the parsing logic of structure parameters for BPF trampoline in the x86-64 JIT compiler, from Pu Lehui. 15) Get BTF working for kernels with CONFIG_RUST enabled by excluding Rust compilation units with pahole, from Martin Rodriguez Reboredo. 16) Get bpf_setsockopt() working for kTLS on top of TCP sockets, from Kui-Feng Lee. 17) Disable stack protection for BPF objects in bpftool given BPF backends don't support it, from Holger Hoffstätte. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (124 commits) selftest/bpf: Make crashes more debuggable in test_progs libbpf: Add documentation to map pinning API functions libbpf: Fix malformed documentation formatting selftests/bpf: Properly enable hwtstamp in xdp_hw_metadata selftests/bpf: Calls bpf_setsockopt() on a ktls enabled socket. bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt(). bpf/selftests: Verify struct_ops prog sleepable behavior bpf: Pass const struct bpf_prog * to .check_member libbpf: Support sleepable struct_ops.s section bpf: Allow BPF_PROG_TYPE_STRUCT_OPS programs to be sleepable selftests/bpf: Fix vmtest static compilation error tools/resolve_btfids: Alter how HOSTCC is forced tools/resolve_btfids: Install subcmd headers bpf/docs: Document the nocast aliasing behavior of ___init bpf/docs: Document how nested trusted fields may be defined bpf/docs: Document cpumask kfuncs in a new file selftests/bpf: Add selftest suite for cpumask kfuncs selftests/bpf: Add nested trust selftests suite bpf: Enable cpumasks to be queried and used as kptrs bpf: Disallow NULLable pointers for trusted kfuncs ... ==================== Link: https://lore.kernel.org/r/20230128004827.21371-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
b568d3072a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts: drivers/net/ethernet/intel/ice/ice_main.c |
||
|
Kees Cook
|
36632d0629 |
io_uring: Replace 0-length array with flexible array
Zero-length arrays are deprecated[1]. Replace struct io_uring_buf_ring's
"bufs" with a flexible array member. (How is the size of this array
verified?) Detected with GCC 13, using -fstrict-flex-arrays=3:
In function 'io_ring_buffer_select',
inlined from 'io_buffer_select' at io_uring/kbuf.c:183:10:
io_uring/kbuf.c:141:23: warning: array subscript 255 is outside the bounds of an interior zero-length array 'struct io_uring_buf[0]' [-Wzero-length-bounds]
141 | buf = &br->bufs[head];
| ^~~~~~~~~~~~~~~
In file included from include/linux/io_uring.h:7,
from io_uring/kbuf.c:10:
include/uapi/linux/io_uring.h: In function 'io_buffer_select':
include/uapi/linux/io_uring.h:628:41: note: while referencing 'bufs'
628 | struct io_uring_buf bufs[0];
| ^~~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Fixes:
|
||
|
Miklos Szeredi
|
8ed7cb3f27 |
fuse: optional supplementary group in create requests
Permission to create an object (create, mkdir, symlink, mknod) needs to take supplementary groups into account. Add a supplementary group request extension. This can contain an arbitrary number of group IDs and can be added to any request. This extension is not added to any request by default. Add FUSE_CREATE_SUPP_GROUP init flag to enable supplementary group info in creation requests. This adds just a single supplementary group that matches the parent group in the case described above. In other cases the extension is not added. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
||
|
Miklos Szeredi
|
15d937d7ca |
fuse: add request extension
Will need to add supplementary groups to create messages, so add the general concept of a request extension. A request extension is appended to the end of the main request. It has a header indicating the size and type of the extension. The create security context (fuse_secctx_*) is similar to the generic request extension, so include that as well in a backward compatible manner. Add the total extension length to the request header. The offset of the extension block within the request can be calculated by: inh->len - inh->total_extlen * 8 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
||
|
Jamie Bainbridge
|
d0941130c9 |
icmp: Add counters for rate limits
There are multiple ICMP rate limiting mechanisms: * Global limits: net.ipv4.icmp_msgs_burst/icmp_msgs_per_sec * v4 per-host limits: net.ipv4.icmp_ratelimit/ratemask * v6 per-host limits: net.ipv6.icmp_ratelimit/ratemask However, when ICMP output is limited, there is no way to tell which limit has been hit or even if the limits are responsible for the lack of ICMP output. Add counters for each of the cases above. As we are within local_bh_disable(), use the __INC stats variant. Example output: # nstat -sz "*RateLimit*" IcmpOutRateLimitGlobal 134 0.0 IcmpOutRateLimitHost 770 0.0 Icmp6OutRateLimitHost 84 0.0 Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Suggested-by: Abhishek Rawal <rawal.abhishek92@gmail.com> Link: https://lore.kernel.org/r/273b32241e6b7fdc5c609e6f5ebc68caf3994342.1674605770.git.jamie.bainbridge@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Jakub Sitnicki
|
91d0b78c51 |
inet: Add IP_LOCAL_PORT_RANGE socket option
Users who want to share a single public IP address for outgoing connections
between several hosts traditionally reach for SNAT. However, SNAT requires
state keeping on the node(s) performing the NAT.
A stateless alternative exists, where a single IP address used for egress
can be shared between several hosts by partitioning the available ephemeral
port range. In such a setup:
1. Each host gets assigned a disjoint range of ephemeral ports.
2. Applications open connections from the host-assigned port range.
3. Return traffic gets routed to the host based on both, the destination IP
and the destination port.
An application which wants to open an outgoing connection (connect) from a
given port range today can choose between two solutions:
1. Manually pick the source port by bind()'ing to it before connect()'ing
the socket.
This approach has a couple of downsides:
a) Search for a free port has to be implemented in the user-space. If
the chosen 4-tuple happens to be busy, the application needs to retry
from a different local port number.
Detecting if 4-tuple is busy can be either easy (TCP) or hard
(UDP). In TCP case, the application simply has to check if connect()
returned an error (EADDRNOTAVAIL). That is assuming that the local
port sharing was enabled (REUSEADDR) by all the sockets.
# Assume desired local port range is 60_000-60_511
s = socket(AF_INET, SOCK_STREAM)
s.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s.bind(("192.0.2.1", 60_000))
s.connect(("1.1.1.1", 53))
# Fails only if 192.0.2.1:60000 -> 1.1.1.1:53 is busy
# Application must retry with another local port
In case of UDP, the network stack allows binding more than one socket
to the same 4-tuple, when local port sharing is enabled
(REUSEADDR). Hence detecting the conflict is much harder and involves
querying sock_diag and toggling the REUSEADDR flag [1].
b) For TCP, bind()-ing to a port within the ephemeral port range means
that no connecting sockets, that is those which leave it to the
network stack to find a free local port at connect() time, can use
the this port.
IOW, the bind hash bucket tb->fastreuse will be 0 or 1, and the port
will be skipped during the free port search at connect() time.
2. Isolate the app in a dedicated netns and use the use the per-netns
ip_local_port_range sysctl to adjust the ephemeral port range bounds.
The per-netns setting affects all sockets, so this approach can be used
only if:
- there is just one egress IP address, or
- the desired egress port range is the same for all egress IP addresses
used by the application.
For TCP, this approach avoids the downsides of (1). Free port search and
4-tuple conflict detection is done by the network stack:
system("sysctl -w net.ipv4.ip_local_port_range='60000 60511'")
s = socket(AF_INET, SOCK_STREAM)
s.setsockopt(SOL_IP, IP_BIND_ADDRESS_NO_PORT, 1)
s.bind(("192.0.2.1", 0))
s.connect(("1.1.1.1", 53))
# Fails if all 4-tuples 192.0.2.1:60000-60511 -> 1.1.1.1:53 are busy
For UDP this approach has limited applicability. Setting the
IP_BIND_ADDRESS_NO_PORT socket option does not result in local source
port being shared with other connected UDP sockets.
Hence relying on the network stack to find a free source port, limits the
number of outgoing UDP flows from a single IP address down to the number
of available ephemeral ports.
To put it another way, partitioning the ephemeral port range between hosts
using the existing Linux networking API is cumbersome.
To address this use case, add a new socket option at the SOL_IP level,
named IP_LOCAL_PORT_RANGE. The new option can be used to clamp down the
ephemeral port range for each socket individually.
The option can be used only to narrow down the per-netns local port
range. If the per-socket range lies outside of the per-netns range, the
latter takes precedence.
UAPI-wise, the low and high range bounds are passed to the kernel as a pair
of u16 values in host byte order packed into a u32. This avoids pointer
passing.
PORT_LO = 40_000
PORT_HI = 40_511
s = socket(AF_INET, SOCK_STREAM)
v = struct.pack("I", PORT_HI << 16 | PORT_LO)
s.setsockopt(SOL_IP, IP_LOCAL_PORT_RANGE, v)
s.bind(("127.0.0.1", 0))
s.getsockname()
# Local address between ("127.0.0.1", 40_000) and ("127.0.0.1", 40_511),
# if there is a free port. EADDRINUSE otherwise.
[1] https://github.com/cloudflare/cloudflare-blog/blob/232b432c1d57/2022-02-connectx/connectx.py#L116
Reviewed-by: Marek Majkowski <marek@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Aaron Lewis
|
14329b825f |
KVM: x86/pmu: Introduce masked events to the pmu event filter
When building a list of filter events, it can sometimes be a challenge to fit all the events needed to adequately restrict the guest into the limited space available in the pmu event filter. This stems from the fact that the pmu event filter requires each event (i.e. event select + unit mask) be listed, when the intention might be to restrict the event select all together, regardless of it's unit mask. Instead of increasing the number of filter events in the pmu event filter, add a new encoding that is able to do a more generalized match on the unit mask. Introduce masked events as another encoding the pmu event filter understands. Masked events has the fields: mask, match, and exclude. When filtering based on these events, the mask is applied to the guest's unit mask to see if it matches the match value (i.e. umask & mask == match). The exclude bit can then be used to exclude events from that match. E.g. for a given event select, if it's easier to say which unit mask values shouldn't be filtered, a masked event can be set up to match all possible unit mask values, then another masked event can be set up to match the unit mask values that shouldn't be filtered. Userspace can query to see if this feature exists by looking for the capability, KVM_CAP_PMU_EVENT_MASKED_EVENTS. This feature is enabled by setting the flags field in the pmu event filter to KVM_PMU_EVENT_FLAG_MASKED_EVENTS. Events can be encoded by using KVM_PMU_ENCODE_MASKED_ENTRY(). It is an error to have a bit set outside the valid bits for a masked event, and calls to KVM_SET_PMU_EVENT_FILTER will return -EINVAL in such cases, including the high bits of the event select (35:32) if called on Intel. With these updates the filter matching code has been updated to match on a common event. Masked events were flexible enough to handle both event types, so they were used as the common event. This changes how guest events get filtered because regardless of the type of event used in the uAPI, they will be converted to masked events. Because of this there could be a slight performance hit because instead of matching the filter event with a lookup on event select + unit mask, it does a lookup on event select then walks the unit masks to find the match. This shouldn't be a big problem because I would expect the set of common event selects to be small, and if they aren't the set can likely be reduced by using masked events to generalize the unit mask. Using one type of event when filtering guest events allows for a common code path to be used. Signed-off-by: Aaron Lewis <aaronlewis@google.com> Link: https://lore.kernel.org/r/20221220161236.555143-5-aaronlewis@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Jakub Kicinski
|
3a330496ba |
net: fou: regenerate the uAPI from the spec
Regenerate the FOU uAPI header from the YAML spec. The flags now come before attributes which use them, and the comments for type disappear (coders should look at the spec instead). Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Sriram Yagnaraman
|
a44b765148 |
netfilter: conntrack: unify established states for SCTP paths
An SCTP endpoint can start an association through a path and tear it
down over another one. That means the initial path will not see the
shutdown sequence, and the conntrack entry will remain in ESTABLISHED
state for 5 days.
By merging the HEARTBEAT_ACKED and ESTABLISHED states into one
ESTABLISHED state, there remains no difference between a primary or
secondary path. The timeout for the merged ESTABLISHED state is set to
210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a
path doesn't see the shutdown sequence, it will expire in a reasonable
amount of time.
With this change in place, there is now more than one state from which
we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so
handle the setting of ASSURED bit whenever a state change has happened
and the new state is ESTABLISHED. Removed the check for dir==REPLY since
the transition to ESTABLISHED can happen only in the reply direction.
Fixes:
|
||
|
Sriram Yagnaraman
|
13bd9b31a9 |
Revert "netfilter: conntrack: add sctp DATA_SENT state"
This reverts commit (
|
||
|
Jakub Kicinski
|
62be69397e |
wireless-next patches for v6.3
First set of patches for v6.3. The most important change here is that the old Wireless Extension user space interface is not supported on Wi-Fi 7 devices at all. We also added a warning if anyone with modern drivers (ie. cfg80211 and mac80211 drivers) tries to use Wireless Extensions, everyone should switch to using nl80211 interface instead. Static WEP support is removed, there wasn't any driver using that anyway so there's no user impact. Otherwise it's smaller features and fixes as usual. Note: As mt76 had tricky conflicts due to the fixes in wireless tree, we decided to merge wireless into wireless-next to solve them easily. There should not be any merge problems anymore. Major changes: cfg80211 * remove never used static WEP support * warn if Wireless Extention interface is used with cfg80211/mac80211 drivers * stop supporting Wireless Extensions with Wi-Fi 7 devices * support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting rfkill * add GPIO DT support bitfield * add FIELD_PREP_CONST() mt76 * per-PHY LED support rtw89 * support new Bluetooth co-existance version rtl8xxxu * support RTL8188EU -----BEGIN PGP SIGNATURE----- iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmPOYeQRHGt2YWxvQGtl cm5lbC5vcmcACgkQbhckVSbrbZvSlAf/Y5ZY5xLEytUma7fBkBObXEfP/7tlBBsu RoRKVx77D1LGfGu0WXG9PCdvyY70e2QtrkdeLHF3gfzLYpNZIyB/eOFhwzCtbJrD ls2yXhdTm9OwDOHAdvXLXx3fmF4bXni7dYdi78VrGCFOnU6XE6X5JpnZYU1SmQ1U 8Ro7H6D9yp8MKfh5Ct19PYSTS5hmHB09vfJ4rbkjHp7kEGvJjYNbvAqGsxatPnh9 Zw35TEIwmhZO4GsXxsG12g6LZa8W8RO8uCwepHxtFM8oGsF68Yb/lkLcdtMiuN6V WdB6qn24faEWjdmt5BzJGueA3Td8KI6t5cHhGbQVKjyFD8lAC+IJQA== =Nq9U -----END PGP SIGNATURE----- Merge tag 'wireless-next-2023-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.3 First set of patches for v6.3. The most important change here is that the old Wireless Extension user space interface is not supported on Wi-Fi 7 devices at all. We also added a warning if anyone with modern drivers (ie. cfg80211 and mac80211 drivers) tries to use Wireless Extensions, everyone should switch to using nl80211 interface instead. Static WEP support is removed, there wasn't any driver using that anyway so there's no user impact. Otherwise it's smaller features and fixes as usual. Note: As mt76 had tricky conflicts due to the fixes in wireless tree, we decided to merge wireless into wireless-next to solve them easily. There should not be any merge problems anymore. Major changes: cfg80211 - remove never used static WEP support - warn if Wireless Extention interface is used with cfg80211/mac80211 drivers - stop supporting Wireless Extensions with Wi-Fi 7 devices - support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting rfkill - add GPIO DT support bitfield - add FIELD_PREP_CONST() mt76 - per-PHY LED support rtw89 - support new Bluetooth co-existance version rtl8xxxu - support RTL8188EU * tag 'wireless-next-2023-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (123 commits) wifi: wireless: deny wireless extensions on MLO-capable devices wifi: wireless: warn on most wireless extension usage wifi: mac80211: drop extra 'e' from ieeee80211... name wifi: cfg80211: Deduplicate certificate loading bitfield: add FIELD_PREP_CONST() wifi: mac80211: add kernel-doc for EHT structure mac80211: support minimal EHT rate reporting on RX wifi: mac80211: Add HE MU-MIMO related flags in ieee80211_bss_conf wifi: mac80211: Add VHT MU-MIMO related flags in ieee80211_bss_conf wifi: cfg80211: Use MLD address to indicate MLD STA disconnection wifi: cfg80211: Support 32 bytes KCK key in GTK rekey offload wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data() wifi: cfg80211: remove support for static WEP wifi: rtl8xxxu: Dump the efuse only for untested devices wifi: rtl8xxxu: Print the ROM version too wifi: rtw88: Use non-atomic sta iterator in rtw_ra_mask_info_update() wifi: rtw88: Use rtw_iterate_vifs() for rtw_vif_watch_dog_iter() wifi: rtw88: Move register access from rtw_bf_assoc() outside the RCU wifi: rtl8xxxu: Use a longer retry limit of 48 wifi: rtl8xxxu: Report the RSSI to the firmware ... ==================== Link: https://lore.kernel.org/r/20230123103338.330CBC433EF@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Stanislav Fomichev
|
2b3486bc2d |
bpf: Introduce device-bound XDP programs
New flag BPF_F_XDP_DEV_BOUND_ONLY plus all the infra to have a way to associate a netdev with a BPF program at load time. netdevsim checks are dropped in favor of generic check in dev_xdp_attach. Cc: John Fastabend <john.fastabend@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Willem de Bruijn <willemb@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Anatoly Burakov <anatoly.burakov@intel.com> Cc: Alexander Lobakin <alexandr.lobakin@intel.com> Cc: Magnus Karlsson <magnus.karlsson@gmail.com> Cc: Maryam Tahhan <mtahhan@redhat.com> Cc: xdp-hints@xdp-project.net Cc: netdev@vger.kernel.org Signed-off-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20230119221536.3349901-6-sdf@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
|
Greg Kroah-Hartman
|
e3e9fc7fa7 |
Merge 6.2-rc5 into usb-next
We need the USB fixes in here and this resolves merge conflicts as reported in linux-next in the following files: drivers/usb/host/xhci.c drivers/usb/host/xhci.h drivers/usb/typec/ucsi/ucsi.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Vladimir Oltean
|
04692c9020 |
net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)
IEEE 802.3-2018 clause 99 defines a MAC Merge sublayer which contains an Express MAC and a Preemptible MAC. Both MACs are hidden to higher and lower layers and visible as a single MAC (packet classification to eMAC or pMAC on TX is done based on priority; classification on RX is done based on SFD). For devices which support a MAC Merge sublayer, it is desirable to retrieve individual packet counters from the eMAC and the pMAC, as well as aggregate statistics (their sum). Introduce a new ETHTOOL_A_STATS_SRC attribute which is part of the policy of ETHTOOL_MSG_STATS_GET and, and an ETHTOOL_A_PAUSE_STATS_SRC which is part of the policy of ETHTOOL_MSG_PAUSE_GET (accepted when ETHTOOL_FLAG_STATS is set in the common ethtool header). Both of these take values from enum ethtool_mac_stats_src, defaulting to "aggregate" in the absence of the attribute. Existing drivers do not need to pay attention to this enum which was added to all driver-facing structures, just the ones which report the MAC merge layer as supported. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
2b30f8291a |
net: ethtool: add support for MAC Merge layer
The MAC merge sublayer (IEEE 802.3-2018 clause 99) is one of 2 specifications (the other being Frame Preemption; IEEE 802.1Q-2018 clause 6.7.2), which work together to minimize latency caused by frame interference at TX. The overall goal of TSN is for normal traffic and traffic with a bounded deadline to be able to cohabitate on the same L2 network and not bother each other too much. The standards achieve this (partly) by introducing the concept of preemptible traffic, i.e. Ethernet frames that have a custom value for the Start-of-Frame-Delimiter (SFD), and these frames can be fragmented and reassembled at L2 on a link-local basis. The non-preemptible frames are called express traffic, they are transmitted using a normal SFD, and they can preempt preemptible frames, therefore having lower latency, which can matter at lower (100 Mbps) link speeds, or at high MTUs (jumbo frames around 9K). Preemption is not recursive, i.e. a P frame cannot preempt another P frame. Preemption also does not depend upon priority, or otherwise said, an E frame with prio 0 will still preempt a P frame with prio 7. In terms of implementation, the standards talk about the presence of an express MAC (eMAC) which handles express traffic, and a preemptible MAC (pMAC) which handles preemptible traffic, and these MACs are multiplexed on the same MII by a MAC merge layer. To support frame preemption, the definition of the SFD was generalized to SMD (Start-of-mPacket-Delimiter), where an mPacket is essentially an Ethernet frame fragment, or a complete frame. Stations unaware of an SMD value different from the standard SFD will treat P frames as error frames. To prevent that from happening, a negotiation process is defined. On RX, packets are dispatched to the eMAC or pMAC after being filtered by their SMD. On TX, the eMAC/pMAC classification decision is taken by the 802.1Q spec, based on packet priority (each of the 8 user priority values may have an admin-status of preemptible or express). The MAC Merge layer and the Frame Preemption parameters have some degree of independence in terms of how software stacks are supposed to deal with them. The activation of the MM layer is supposed to be controlled by an LLDP daemon (after it has been communicated that the link partner also supports it), after which a (hardware-based or not) verification handshake takes place, before actually enabling the feature. So the process is intended to be relatively plug-and-play. Whereas FP settings are supposed to be coordinated across a network using something approximating NETCONF. The support contained here is exclusively for the 802.3 (MAC Merge) portions and not for the 802.1Q (Frame Preemption) parts. This API is sufficient for an LLDP daemon to do its job. The FP adminStatus variable from 802.1Q is outside the scope of an LLDP daemon. I have taken a few creative licenses and augmented the Linux kernel UAPI compared to the standard managed objects recommended by IEEE 802.3. These are: - ETHTOOL_A_MM_PMAC_ENABLED: According to Figure 99-6: Receive Processing state diagram, a MAC Merge layer is always supposed to be able to receive P frames. However, this implies keeping the pMAC powered on, which will consume needless power in applications where FP will never be used. If LLDP is used, the reception of an Additional Ethernet Capabilities TLV from the link partner is sufficient indication that the pMAC should be enabled. So my proposal is that in Linux, we keep the pMAC turned off by default and that user space turns it on when needed. - ETHTOOL_A_MM_VERIFY_ENABLED: The IEEE managed object is called aMACMergeVerifyDisableTx. I opted for consistency (positive logic) in the boolean netlink attributes offered, so this is also positive here. Other than the meaning being reversed, they correspond to the same thing. - ETHTOOL_A_MM_MAX_VERIFY_TIME: I found it most reasonable for a LLDP daemon to maximize the verifyTime variable (delay between SMD-V transmissions), to maximize its chances that the LP replies. IEEE says that the verifyTime can range between 1 and 128 ms, but the NXP ENETC stupidly keeps this variable in a 7 bit register, so the maximum supported value is 127 ms. I could have chosen to hardcode this in the LLDP daemon to a lower value, but why not let the kernel expose its supported range directly. - ETHTOOL_A_MM_TX_MIN_FRAG_SIZE: the standard managed object is called aMACMergeAddFragSize, and expresses the "additional" fragment size (on top of ETH_ZLEN), whereas this expresses the absolute value of the fragment size. - ETHTOOL_A_MM_RX_MIN_FRAG_SIZE: there doesn't appear to exist a managed object mandated by the standard, but user space clearly needs to know what is the minimum supported fragment size of our local receiver, since LLDP must advertise a value no lower than that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Hans Verkuil
|
ba47652ba6 |
media: meye: remove this deprecated driver
The meye driver does not use the vb2 framework for streaming video, instead it implements this in the driver. This is error prone, and nobody stepped in to convert this driver to that framework. The hardware is very old, so the decision was made to remove it altogether. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Tomi Valkeinen
|
2f91e10ee6 |
media: subdev: add stream based configuration
Add support to manage configurations (format, crop, compose) per stream, instead of per pad. This is accomplished with data structures that hold an array of all subdev's stream configurations. The number of streams can vary at runtime based on routing. Every time the routing is changed, the stream configurations need to be re-initialized. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Laurent Pinchart
|
a418bb3f30 |
media: subdev: Add [GS]_ROUTING subdev ioctls and operations
Add support for subdev internal routing. A route is defined as a single stream from a sink pad to a source pad. The userspace can configure the routing via two new ioctls, VIDIOC_SUBDEV_G_ROUTING and VIDIOC_SUBDEV_S_ROUTING, and subdevs can implement the functionality with v4l2_subdev_pad_ops.set_routing(). - Add sink and source streams for multiplexed links - Copy the argument back in case of an error. This is needed to let the caller know the number of routes. - Expand and refine documentation. - Make the 'routes' pointer a __u64 __user pointer so that a compat32 version of the ioctl is not required. - Add struct v4l2_subdev_krouting to be used for subdevice operations. - Fix typecasing warnings - Check sink & source pad types - Add 'which' field - Routing to subdev state - Dropped get_routing subdev op Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Tomi Valkeinen
|
9a6b5bf4c1 |
media: add V4L2_SUBDEV_CAP_STREAMS
Add a subdev capability flag to expose to userspace if a subdev supports multiplexed streams. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Linus Lüssing
|
0c4061c0d0 |
batman-adv: tvlv: prepare for tvlv enabled multicast packet type
Prepare TVLV infrastructure for more packet types, in particular the upcoming batman-adv multicast packet type. For that swap the OGM vs. unicast-tvlv packet boolean indicator to an explicit unsigned integer packet type variable. And provide the skb to a call to batadv_tvlv_containers_process(), as later the multicast packet's TVLV handler will need to have access not only to the TVLV but the full skb for forwarding. Forwarding will be invoked from the multicast packet's TVLVs' contents later. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> |
||
|
Jakub Kicinski
|
b3c588cd55 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ipa/ipa_interrupt.c drivers/net/ipa/ipa_interrupt.h |
||
|
Tomi Valkeinen
|
0dc1d7a79a |
media: Add Y210, Y212 and Y216 formats
Add Y210, Y212 and Y216 formats. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
||
|
Tomi Valkeinen
|
8d0e3fc61a |
media: Add 2-10-10-10 RGB formats
Add RGBX1010102, RGBA1010102 and ARGB2101010 formats. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
||
|
Mark Brown
|
f90b529bcb |
arm64/sme: Implement ZT0 ptrace support
Implement support for a new note type NT_ARM64_ZT providing access to ZT0 when implemented. Since ZT0 is a register with constant size this is much simpler than for other SME state. As ZT0 is only accessible when PSTATE.ZA is set writes to ZT0 cause PSTATE.ZA to be set, the main alternative would be to return -EBUSY in this case but this seemed more constructive. Practical users are also going to be working with ZA anyway and have some understanding of the state. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20221208-arm64-sme2-v4-12-f2fa0aef982f@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Daniel Machon
|
622f1b2fae |
net: dcb: add new rewrite table
Add new rewrite table and all the required functions, offload hooks and bookkeeping for maintaining it. The rewrite table reuses the app struct, and the entire set of app selectors. As such, some bookeeping code can be shared between the rewrite- and the APP table. New functions for getting, setting and deleting entries has been added. Apart from operating on the rewrite list, these functions do not emit a DCB_APP_EVENT when the list os modified. The new dcb_getrewr does a lookup based on selector and priority and returns the protocol, so that mappings from priority to protocol, for a given selector and ifindex is obtained. Also, a new nested attribute has been added, that encapsulates one or more app structs. This attribute is used to distinguish the two tables. The dcb_lock used for the APP table is reused for the rewrite table. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Li Li
|
0567461a7a |
binder: return pending info for frozen async txns
An async transaction to a frozen process will still be successfully put in the queue. But this pending async transaction won't be processed until the target process is unfrozen at an unspecified time in the future. Pass this important information back to the user space caller by returning BR_TRANSACTION_PENDING_FROZEN. Signed-off-by: Li Li <dualli@google.com> Acked-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20221123201654.589322-2-dualli@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Samuel Thibault
|
24d69384bc |
VT: Add KD_FONT_OP_SET/GET_TALL operations
The KD_FONT_OP_SET/GET operations hardcode vpitch to be 32 pixels, which only dates from the old VGA hardware which as asserting this. Drivers such as fbcon however do not have such limitation, so this introduces KD_FONT_OP_SET/GET_TALL operations, which userland can try to use to avoid this limitation, thus opening the patch to >32 pixels font height. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Link: https://lore.kernel.org/r/20230119151935.013597162@ens-lyon.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ilpo Järvinen
|
afd216ca17 |
serial: 8250: Define IIR 64 byte bit & cleanup related code
16750 indicates 64 bytes FIFO with a IIR bit. Add define for it and make related code more obvious. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20221125130509.8482-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ilpo Järvinen
|
3398cc4f2b |
serial: 8250: Add IIR FIFOs enabled field properly
Don't use magic literals & comments but define a real field instead for UART_IIR_FIFO_ENABLED and name also the values. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20221125130509.8482-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jó Ágila Bitsch
|
93c473948c |
usb: gadget: add WebUSB landing page support
There is a custom (non-USB IF) extension to the USB standard: https://wicg.github.io/webusb/ This specification is published under the W3C Community Contributor Agreement, which in particular allows to implement the specification without any royalties. The specification allows USB gadgets to announce an URL to landing page and describes a Javascript interface for websites to interact with the USB gadget, if the user allows it. It is currently supported by Chromium-based browsers, such as Chrome, Edge and Opera on all major operating systems including Linux. This patch adds optional support for Linux-based USB gadgets wishing to expose such a landing page. During device enumeration, a host recognizes that the announced USB version is at least 2.01, which means, that there are BOS descriptors available. The device than announces WebUSB support using a platform device capability. This includes a vendor code under which the landing page URL can be retrieved using a vendor-specific request. Previously, the BOS descriptors would unconditionally include an LPM related descriptor, as BOS descriptors were only ever sent when the device was LPM capable. As this is no longer the case, this patch puts this descriptor behind a lpm_capable condition. Usage is modeled after os_desc descriptors: echo 1 > webusb/use echo "https://www.kernel.org" > webusb/landingPage lsusb will report the device with the following lines: Platform Device Capability: bLength 24 bDescriptorType 16 bDevCapabilityType 5 bReserved 0 PlatformCapabilityUUID {3408b638-09a9-47a0-8bfd-a0768815b665} WebUSB: bcdVersion 1.00 bVendorCode 0 iLandingPage 1 https://www.kernel.org Signed-off-by: Jó Ágila Bitsch <jgilab@gmail.com> Link: https://lore.kernel.org/r/Y8Crf8P2qAWuuk/F@jo-einhundert Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jeff Xu
|
105ff5339f |
mm/memfd: add MFD_NOEXEC_SEAL and MFD_EXEC
The new MFD_NOEXEC_SEAL and MFD_EXEC flags allows application to set
executable bit at creation time (memfd_create).
When MFD_NOEXEC_SEAL is set, memfd is created without executable bit
(mode:0666), and sealed with F_SEAL_EXEC, so it can't be chmod to be
executable (mode: 0777) after creation.
when MFD_EXEC flag is set, memfd is created with executable bit
(mode:0777), this is the same as the old behavior of memfd_create.
The new pid namespaced sysctl vm.memfd_noexec has 3 values:
0: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL acts like
MFD_EXEC was set.
1: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL acts like
MFD_NOEXEC_SEAL was set.
2: memfd_create() without MFD_NOEXEC_SEAL will be rejected.
The sysctl allows finer control of memfd_create for old-software that
doesn't set the executable bit, for example, a container with
vm.memfd_noexec=1 means the old-software will create non-executable memfd
by default. Also, the value of memfd_noexec is passed to child namespace
at creation time. For example, if the init namespace has
vm.memfd_noexec=2, all its children namespaces will be created with 2.
[akpm@linux-foundation.org: add stub functions to fix build]
[akpm@linux-foundation.org: remove unneeded register_pid_ns_ctl_table_vm() stub, per Jeff]
[akpm@linux-foundation.org: s/pr_warn_ratelimited/pr_warn_once/, per review]
[akpm@linux-foundation.org: fix CONFIG_SYSCTL=n warning]
Link: https://lkml.kernel.org/r/20221215001205.51969-4-jeffxu@google.com
Signed-off-by: Jeff Xu <jeffxu@google.com>
Co-developed-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Daniel Verkamp
|
6fd7353829 |
mm/memfd: add F_SEAL_EXEC
Patch series "mm/memfd: introduce MFD_NOEXEC_SEAL and MFD_EXEC", v8. Since Linux introduced the memfd feature, memfd have always had their execute bit set, and the memfd_create() syscall doesn't allow setting it differently. However, in a secure by default system, such as ChromeOS, (where all executables should come from the rootfs, which is protected by Verified boot), this executable nature of memfd opens a door for NoExec bypass and enables “confused deputy attack”. E.g, in VRP bug [1]: cros_vm process created a memfd to share the content with an external process, however the memfd is overwritten and used for executing arbitrary code and root escalation. [2] lists more VRP in this kind. On the other hand, executable memfd has its legit use, runc uses memfd’s seal and executable feature to copy the contents of the binary then execute them, for such system, we need a solution to differentiate runc's use of executable memfds and an attacker's [3]. To address those above, this set of patches add following: 1> Let memfd_create() set X bit at creation time. 2> Let memfd to be sealed for modifying X bit. 3> A new pid namespace sysctl: vm.memfd_noexec to control the behavior of X bit.For example, if a container has vm.memfd_noexec=2, then memfd_create() without MFD_NOEXEC_SEAL will be rejected. 4> A new security hook in memfd_create(). This make it possible to a new LSM, which rejects or allows executable memfd based on its security policy. This patch (of 5): The new F_SEAL_EXEC flag will prevent modification of the exec bits: written as traditional octal mask, 0111, or as named flags, S_IXUSR | S_IXGRP | S_IXOTH. Any chmod(2) or similar call that attempts to modify any of these bits after the seal is applied will fail with errno EPERM. This will preserve the execute bits as they are at the time of sealing, so the memfd will become either permanently executable or permanently un-executable. Link: https://lkml.kernel.org/r/20221215001205.51969-1-jeffxu@google.com Link: https://lkml.kernel.org/r/20221215001205.51969-2-jeffxu@google.com Signed-off-by: Daniel Verkamp <dverkamp@chromium.org> Co-developed-by: Jeff Xu <jeffxu@google.com> Signed-off-by: Jeff Xu <jeffxu@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jann Horn <jannh@google.com> Cc: Jorge Lucangeli Obes <jorgelo@chromium.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: kernel test robot <lkp@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Veerendranath Jakkam
|
bfc551679c |
wifi: cfg80211: Use MLD address to indicate MLD STA disconnection
We use station's MLD address to report disconnection of MLD station. Update the documentation in multiple places to indicate this. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20221206080226.1702646-4-quic_vjakkam@quicinc.com [update commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Shivani Baranwal
|
648fba791c |
wifi: cfg80211: Support 32 bytes KCK key in GTK rekey offload
Currently, maximum KCK key length supported for GTK rekey offload is 24 bytes but with some newer AKMs the KCK key length can be 32 bytes. e.g., 00-0F-AC:24 AKM suite with SAE finite cyclic group 21. Add support to allow 32 bytes KCK keys in GTK rekey offload. Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com> Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20221206143715.1802987-3-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Fernando Fernandez Mancera
|
f80a612dd7 |
netfilter: nf_tables: add support to destroy operation
Introduce NFT_MSG_DESTROY* message type. The destroy operation performs a delete operation but ignoring the ENOENT errors. This is useful for the transaction semantics, where failing to delete an object which does not exist results in aborting the transaction. This new command allows the transaction to proceed in case the object does not exist. Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> |
||
|
Hangbin Liu
|
0349b8779c |
sched: add new attr TCA_EXT_WARN_MSG to report tc extact message
We will report extack message if there is an error via netlink_ack(). But
if the rule is not to be exclusively executed by the hardware, extack is not
passed along and offloading failures don't get logged.
In commit
|
||
|
Kees Cook
|
b839212988 |
media: uvcvideo: Silence memcpy() run-time false positive warnings
The memcpy() in uvc_video_decode_meta() intentionally copies across the length and flags members and into the trailing buf flexible array. Split the copy so that the compiler can better reason about (the lack of) buffer overflows here. Avoid the run-time false positive warning: memcpy: detected field-spanning write (size 12) of single field "&meta->length" at drivers/media/usb/uvc/uvc_video.c:1355 (size 1) Additionally fix a typo in the documentation for struct uvc_meta_buf. Reported-by: ionut_n2001@yahoo.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=216810 Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> |
||
|
Ricardo Ribalda
|
716c330433 |
media: uvcvideo: Use standard names for menus
Instead of duplicating the menu info, use the one from the core. Also, do not use extra memory for 1:1 mappings. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> |
||
|
Ziyang Xuan
|
d219df60a7 |
bpf: Add ipip6 and ip6ip decap support for bpf_skb_adjust_room()
Add ipip6 and ip6ip decap support for bpf_skb_adjust_room().
Main use case is for using cls_bpf on ingress hook to decapsulate
IPv4 over IPv6 and IPv6 over IPv4 tunnel packets.
Add two new flags BPF_F_ADJ_ROOM_DECAP_L3_IPV{4,6} to indicate the
new IP header version after decapsulating the outer IP header.
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/b268ec7f0ff9431f4f43b1b40ab856ebb28cb4e1.1673574419.git.william.xuanziyang@huawei.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
||
|
Linus Torvalds
|
d45b832d6f |
arm64 fixes for -rc4
- Fix PAGE_TABLE_CHECK failures on hugepage splitting path
- Fix PSCI encoding of MEM_PROTECT_RANGE function in UAPI header
- Fix NULL deref when accessing debugfs node if PSCI is not present
- Fix MTE core dumping when VMA list is being updated concurrently
- Fix SME signal frame handling when SVE is not implemented by the CPU
- Fix asm constraints for cmpxchg_double() to hazard both words
- Fix build failure with stack tracer and older versions of Clang
- Bring back workaround for Cortex-A715 erratum 2645198
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmO9SzwQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLdYB/9pX4El38TX4Y4M6sR2yl+m1rkGRiU4nV3N
MKJ3ZVjrx87QZ8CKVYmJbnHzolN0Art9WvqFnyxtPMBlZyWzHjtsrQnad3VwLDOu
4qmqjDCXvPod1EncCxBiGu28FZ88HoLqhnwWB6O2Su6TlczD0kJTfzincdyzqvi2
r0uUlBd9gtFt3sjV+sLPjE6NqMf9MfhoOLLafijz7ZMElQL+2/BjZxhpHLaWhUz1
aHIp4w841TJOuSlCwstX20Nc6Q9+6ta07bw+TD/flyQ+IGUptgDEoIrpjdSO5b2t
zFFHHN5IXovAJPDfhAdXGAbC2SDFyYJtURCpv6hVt/SSsilGEbYg
=241k
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Here's a sizeable batch of Friday the 13th arm64 fixes for -rc4. What
could possibly go wrong?
The obvious reason we have so much here is because of the holiday
season right after the merge window, but we've also brought back an
erratum workaround that was previously dropped at the last minute and
there's an MTE coredumping fix that strays outside of the arch/arm64
directory.
Summary:
- Fix PAGE_TABLE_CHECK failures on hugepage splitting path
- Fix PSCI encoding of MEM_PROTECT_RANGE function in UAPI header
- Fix NULL deref when accessing debugfs node if PSCI is not present
- Fix MTE core dumping when VMA list is being updated concurrently
- Fix SME signal frame handling when SVE is not implemented by the
CPU
- Fix asm constraints for cmpxchg_double() to hazard both words
- Fix build failure with stack tracer and older versions of Clang
- Bring back workaround for Cortex-A715 erratum 2645198"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix build with CC=clang, CONFIG_FTRACE=y and CONFIG_STACK_TRACER=y
arm64/mm: Define dummy pud_user_exec() when using 2-level page-table
arm64: errata: Workaround possible Cortex-A715 [ESR|FAR]_ELx corruption
firmware/psci: Don't register with debugfs if PSCI isn't available
firmware/psci: Fix MEM_PROTECT_RANGE function numbers
arm64/signal: Always allocate SVE signal frames on SME only systems
arm64/signal: Always accept SVE signal frames on SME only systems
arm64/sme: Fix context switch for SME only systems
arm64: cmpxchg_double*: hazard against entire exchange variable
arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning
arm64: mte: Avoid the racy walk of the vma list during core dump
elfcore: Add a cprm parameter to elf_core_extra_{phdrs,data_size}
arm64: mte: Fix double-freeing of the temporary tag storage during coredump
arm64: ptrace: Use ARM64_SME to guard the SME register enumerations
arm64/mm: add pud_user_exec() check in pud_user_accessible_page()
arm64/mm: fix incorrect file_map_count for invalid pmd
|
||
|
Daniele Palmas
|
31de284239 |
ethtool: add tx aggregation parameters
Add the following ethtool tx aggregation parameters: ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES Maximum size in bytes of a tx aggregated block of frames. ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES Maximum number of frames that can be aggregated into a block. ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS Time in usecs after the first packet arrival in an aggregated block for the block to be sent. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Jakub Kicinski
|
a99da46ac0 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/usb/r8152.c |
||
|
Piergiorgio Beruto
|
16178c8ef5 |
drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHY
This patch adds the link modes for the IEEE 802.3cg Clause 147 10BASE-T1S Ethernet PHY. According to the specifications, the 10BASE-T1S supports Point-To-Point Full-Duplex, Point-To-Point Half-Duplex and/or Point-To-Multipoint (AKA Multi-Drop) Half-Duplex operations. Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Piergiorgio Beruto
|
8580e16c28 |
net/ethtool: add netlink interface for the PLCA RS
Add support for configuring the PLCA Reconciliation Sublayer on multi-drop PHYs that support IEEE802.3cg-2019 Clause 148 (e.g., 10BASE-T1S). This patch adds the appropriate netlink interface to ethtool. Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Michal Clapinski
|
544a4f2ecd |
sched/membarrier: Introduce MEMBARRIER_CMD_GET_REGISTRATIONS
Provide a method to query previously issued registrations. Signed-off-by: Michal Clapinski <mclapinski@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20221207164338.1535591-2-mclapinski@google.com |
||
|
Kees Cook
|
b466a25c93 |
ethtool: Replace 0-length array with flexible array
Zero-length arrays are deprecated[1]. Replace struct ethtool_rxnfc's
"rule_locs" 0-length array with a flexible array. Detected with GCC 13,
using -fstrict-flex-arrays=3:
net/ethtool/common.c: In function 'ethtool_get_max_rxnfc_channel':
net/ethtool/common.c:558:55: warning: array subscript i is outside array bounds of '__u32[0]' {aka 'unsigned int[]'} [-Warray-bounds=]
558 | .fs.location = info->rule_locs[i],
| ~~~~~~~~~~~~~~~^~~
In file included from include/linux/ethtool.h:19,
from include/uapi/linux/ethtool_netlink.h:12,
from include/linux/ethtool_netlink.h:6,
from net/ethtool/common.c:3:
include/uapi/linux/ethtool.h:1186:41: note: while referencing
'rule_locs'
1186 | __u32 rule_locs[0];
| ^~~~~~~~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: kernel test robot <lkp@intel.com>
Cc: Oleksij Rempel <linux@rempel-privat.de>
Cc: Sean Anderson <sean.anderson@seco.com>
Cc: Alexandru Tachici <alexandru.tachici@analog.com>
Cc: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230106042844.give.885-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Kees Cook
|
e8d283b6cf |
net: ipv6: rpl_iptunnel: Replace 0-length arrays with flexible arrays
Zero-length arrays are deprecated[1]. Replace struct ipv6_rpl_sr_hdr's
"segments" union of 0-length arrays with flexible arrays. Detected with
GCC 13, using -fstrict-flex-arrays=3:
In function 'rpl_validate_srh',
inlined from 'rpl_build_state' at ../net/ipv6/rpl_iptunnel.c:96:7:
../net/ipv6/rpl_iptunnel.c:60:28: warning: array subscript <unknown> is outside array bounds of 'struct in6_addr[0]' [-Warray-bounds=]
60 | if (ipv6_addr_type(&srh->rpl_segaddr[srh->segments_left - 1]) &
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../include/net/rpl.h:12,
from ../net/ipv6/rpl_iptunnel.c:13:
../include/uapi/linux/rpl.h: In function 'rpl_build_state':
../include/uapi/linux/rpl.h:40:33: note: while referencing 'addr'
40 | struct in6_addr addr[0];
| ^~~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230105221533.never.711-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Kees Cook
|
0b5dfa35da |
ipv6: ioam: Replace 0-length array with flexible array
Zero-length arrays are deprecated[1]. Replace struct ioam6_trace_hdr's
"data" 0-length array with a flexible array. Detected with GCC 13,
using -fstrict-flex-arrays=3:
net/ipv6/ioam6_iptunnel.c: In function 'ioam6_build_state':
net/ipv6/ioam6_iptunnel.c:194:37: warning: array subscript <unknown> is outside array bounds of '__u8[0]' {aka 'unsigned char[]'} [-Warray-bounds=]
194 | tuninfo->traceh.data[trace->remlen * 4] = IPV6_TLV_PADN;
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
In file included from include/linux/ioam6.h:11,
from net/ipv6/ioam6_iptunnel.c:13:
include/uapi/linux/ioam6.h:130:17: note: while referencing 'data'
130 | __u8 data[0];
| ^~~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Justin Iurman <justin.iurman@uliege.be>
Tested-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://lore.kernel.org/r/20230105222115.never.661-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Linus Torvalds
|
a689b938df |
block-2023-01-06
-----BEGIN PGP SIGNATURE-----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=LJ5Q
-----END PGP SIGNATURE-----
Merge tag 'block-2023-01-06' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"The big change here is obviously the revert of the pktcdvd driver
removal. Outside of that, just minor tweaks. In detail:
- Re-instate the pktcdvd driver, which necessitates adding back
bio_copy_data_iter() and the fops->devnode() hook for now (me)
- Fix for splitting of a bio marked as NOWAIT, causing either nowait
reads or writes to error with EAGAIN even if parts of the IO
completed (me)
- Fix for ublk, punting management commands to io-wq as they can all
easily block for extended periods of time (Ming)
- Removal of SRCU dependency for the block layer (Paul)"
* tag 'block-2023-01-06' of git://git.kernel.dk/linux:
block: Remove "select SRCU"
Revert "pktcdvd: remove driver."
Revert "block: remove devnode callback from struct block_device_operations"
Revert "block: bio_copy_data_iter"
ublk: honor IO_URING_F_NONBLOCK for handling control command
block: don't allow splitting of a REQ_NOWAIT bio
block: handle bio_split_to_limits() NULL return
|
||
|
Will Deacon
|
f3dc61cde8 |
firmware/psci: Fix MEM_PROTECT_RANGE function numbers
PSCI v1.1 offers 32-bit and 64-bit variants of the MEM_PROTECT_RANGE
call using function identifier 20.
Fix the incorrect definitions of the MEM_PROTECT_CHECK_RANGE calls in
the PSCI UAPI header.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Fixes:
|
||
|
Jakub Kicinski
|
4aea86b403 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
50011c32f4 |
Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons,
avoid null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught
by Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch
and kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal document
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TlcN
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
|
||
|
Jakub Kicinski
|
d75858ef10 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY7X/4wAKCRDbK58LschI g7gzAQCjKsLtAWg1OplW+B7pvEPwkQ8g3O1+PYWlToCUACTlzQD+PEMrqGnxB573 oQAk6I2yOTwLgvlHkrm+TIdKSouI4gs= =2hUY -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== bpf-next 2023-01-04 We've added 45 non-merge commits during the last 21 day(s) which contain a total of 50 files changed, 1454 insertions(+), 375 deletions(-). The main changes are: 1) Fixes, improvements and refactoring of parts of BPF verifier's state equivalence checks, from Andrii Nakryiko. 2) Fix a few corner cases in libbpf's BTF-to-C converter in particular around padding handling and enums, also from Andrii Nakryiko. 3) Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata, from Christian Ehrig. 4) Improve x86 JIT's codegen for PROBE_MEM runtime error checks, from Dave Marchevsky. 5) Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers, from Jiri Olsa. 6) Add proper documentation for BPF_MAP_TYPE_SOCK{MAP,HASH} maps, from Maryam Tahhan. 7) Improvements in libbpf's btf_parse_elf error handling, from Changbin Du. 8) Bigger batch of improvements to BPF tracing code samples, from Daniel T. Lee. 9) Add LoongArch support to libbpf's bpf_tracing helper header, from Hengqi Chen. 10) Fix a libbpf compiler warning in perf_event_open_probe on arm32, from Khem Raj. 11) Optimize bpf_local_storage_elem by removing 56 bytes of padding, from Martin KaFai Lau. 12) Use pkg-config to locate libelf for resolve_btfids build, from Shen Jiamin. 13) Various libbpf improvements around API documentation and errno handling, from Xin Liu. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits) libbpf: Return -ENODATA for missing btf section libbpf: Add LoongArch support to bpf_tracing.h libbpf: Restore errno after pr_warn. libbpf: Added the description of some API functions libbpf: Fix invalid return address register in s390 samples/bpf: Use BPF_KSYSCALL macro in syscall tracing programs samples/bpf: Fix tracex2 by using BPF_KSYSCALL macro samples/bpf: Change _kern suffix to .bpf with syscall tracing program samples/bpf: Use vmlinux.h instead of implicit headers in syscall tracing program samples/bpf: Use kyscall instead of kprobe in syscall tracing program bpf: rename list_head -> graph_root in field info types libbpf: fix errno is overwritten after being closed. bpf: fix regs_exact() logic in regsafe() to remap IDs correctly bpf: perform byte-by-byte comparison only when necessary in regsafe() bpf: reject non-exact register type matches in regsafe() bpf: generalize MAYBE_NULL vs non-MAYBE_NULL rule bpf: reorganize struct bpf_reg_state fields bpf: teach refsafe() to take into account ID remapping bpf: Remove unused field initialization in bpf's ctl_table selftests/bpf: Add jit probe_mem corner case tests to s390x denylist ... ==================== Link: https://lore.kernel.org/r/20230105000926.31350-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
41c03ba9be |
virtio,vhost,vdpa: fixes, cleanups
mostly fixes all over the place, a couple of cleanups. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmOsSY4PHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpnEoH/i7iGllhlBKKula2o97CixSWqMYY7ncryfTN c3F3Wjk4imlhR8Je7n+xmDPLoE9vFkKdZL6o7kIESCJfNjCQ6r6Rnl8LoHkOZhvj oLJ8zUfbOa5+B5kzOdnh2WV+3uNkssjayTrozvkDQ4r9MeSVRaC/xZ+lz85PQ+c7 FaNNyT2G+fZ6HoQg5U+Q+bj2lqxP9FYKMqURWGxUqa/gIMmky6VJeUQvmVdQuzCq cHR48USpn8WE7j8uTf6yCQQuCElOQo1j7Op3FPyaNR3bPWbgzjvOnPci+giQ6hJ5 OAKxJ6HX0ApqcpPoPaA+Qg43EAha+Cu7kw4I58J0U09nQIf/N9w= =4CJb -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: "Mostly fixes all over the place, a couple of cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (32 commits) virtio_blk: Fix signedness bug in virtblk_prep_rq() vdpa_sim_net: should not drop the multicast/broadcast packet vdpasim: fix memory leak when freeing IOTLBs vdpa: conditionally fill max max queue pair for stats vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_remove vduse: Validate vq_num in vduse_validate_config() tools/virtio: remove smp_read_barrier_depends() tools/virtio: remove stray characters vhost_vdpa: fix the crash in unmap a large memory virtio: Implementing attribute show with sysfs_emit virtio-crypto: fix memory leak in virtio_crypto_alg_skcipher_close_session() tools/virtio: Variable type completion vdpa_sim: fix vringh initialization in vdpasim_queue_ready() virtio_blk: use UINT_MAX instead of -1U vhost-vdpa: fix an iotlb memory leak vhost: fix range used in translate_desc() vringh: fix range used in iotlb_translate() vhost/vsock: Fix error handling in vhost_vsock_init() vdpa_sim: fix possible memory leak in vdpasim_net_init() and vdpasim_blk_init() tools: Delete the unneeded semicolon after curly braces ... |
||
|
Jens Axboe
|
4b83e99ee7 |
Revert "pktcdvd: remove driver."
This reverts commit
|