dtschema expects PWM node name to be a generic "pwm". This also matches
Devicetree specification requirements about generic node names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220214081916.162014-4-krzysztof.kozlowski@canonical.com
This commit enables USB device mode at J5 micro-B USB port of Jetson
Xavier NX.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On P3737 board, UART-A is available on 40-pin header. Enable UART-A for
P3737 and change the compatible string to "nvidia,tegra194-hsuart". This
allows supporting HW flow control and is the preferred choice for higher
baud rates.
Signed-off-by: kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add HDA device tree node for Tegra234 chip and for Jetson AGX Orin
platform.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the '-@' DTC option for the Jetson TX1, Jetson Nano, Jetson TX2,
Jetson TX2 NX, Jetson AGX Xavier, Jetson Xavier NX and Jetson AGX Orin
platforms. This option populates the '__symbols__' node that contains
all the necessary symbols for supporting device-tree overlays on these
platforms. These Jetson platforms have various expansion headers,
including a 40-pin GPIO header, that allow various add-on modules to be
connected and this permits users to create device-tree overlays for
these modules.
Please note that this change does increase the size of the resulting DTB
from between 30-50%. For example, with v5.17-rc1 increase in size is as
follows:
tegra210-p2371-2180.dtb: 79580 -> 105744 bytes
tegra210-p3450-0000.dtb: 57465 -> 81357 bytes
tegra186-p2771-0000.dtb: 64763 -> 99553 bytes
tegra186-p3509-0000+p3636-0001.dtb: 48078 -> 62464 bytes
tegra194-p2972-0000.dtb: 75303 -> 111545 bytes
tegra194-p3509-0000+p3668-0000.dtb: 74762 -> 111995 bytes
tegra194-p3509-0000+p3668-0001.dtb: 74578 -> 111748 bytes
tegra234-p3737-0000+p3701-0000.dtb: 11229 -> 12917 bytes
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add audio-graph based sound card support on Jetson AGX Orin
platform. The sound card binds following modules:
* I/O interfaces such as I2S and DMIC (to be specific I2S1,
I2S2, I2S4, I2S6 and DMIC3 instances).
* HW accelerators such as MVC, SFC, AMX, ADX and Mixer (all
the available instances).
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add following devices which are part of APE subsystem
* ACONNECT, AGIC and ADMA
* AHUB and children (ADMAIF, I2S, DMIC, DSPK, MVC, SFC,
AMX, ADX and Mixer)
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The ADMAIF node represents the device that accesses memory in the Tegra
audio subsystem, so that's where the iommus and interconnects properties
should reside. Move them out of the sound card node and into the ADMAIF
node to properly reflect the memory data path.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The NVIDIA Tegra234 SoC comes with one single-instance ARM SMMU used by
isochronous memory clients and two dual-instance ARM SMMUs used by non-
isochronous memory clients.
Add the corresponding device tree nodes and hook up existing memory
clients (SDHCI and BPMP).
Signed-off-by: Thierry Reding <treding@nvidia.com>
Expose power, force-recovery and sleep buttons via a gpio-keys device so
that userspace can receive events from them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add device tree node for GPCDMA controller on Tegra186 target
and Tegra194 target.
Signed-off-by: Rajesh Gumasta <rgumasta@nvidia.com>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert all device tree xo_board users to the RPM_SMD_BB_CLK1 clock.
Note, that xo_board can not be removed (yet), as clk-smd-rpm uses
xo_board internally as the parent for all the clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220215201539.3970459-6-dmitry.baryshkov@linaro.org
Add dmas property for spi@880000 and pinconf setting so that we can use
dma for this spi device. Also, add iommu properties for qup and spi.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220222041951.1185186-2-vkoul@kernel.org
dtschema expects PWM node name to be a generic "pwm". This also matches
Devicetree specification requirements about generic node names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220214081916.162014-5-krzysztof.kozlowski@canonical.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the Rockchip RK809 audio codec on the Rockchip RK3568
EVB1-V10. This requires the VCCIO_ACODEC voltage regulator to be set
to always on.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220222175004.1308990-2-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The TCS4525 voltage regulator provides the vdd_cpu on the Rockchip
RK3568 EVB1. Add the device tree node and connect it to the CPU
nodes.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220223162054.1626257-1-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add OPP tables required to scale DDR/L3 per freq-domain on SC7280 SoCs.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1644428757-25575-1-git-send-email-quic_sibis@quicinc.com
Add initial Exynos7885 device tree nodes with dts for the Samsung Galaxy
A8 (2018), a.k.a. "jackpotlte", with model number "SM-A530F".
Currently this includes some clock support, UART support, and I2C nodes.
Signed-off-by: David Virag <virag.david003@gmail.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20220221194958.117361-2-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Specifying partitions directly under the flash nodes is deprecated. A
partitions node should used instead. The address and size cells are not
needed. Remove them.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Apurva Nandan<a-nandan@ti.com>
Link: https://lore.kernel.org/r/20220217181025.1815118-2-p.yadav@ti.com
The OSPI flash nodes are missing a space before the opening brace. Fix
that.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Apurva Nandan<a-nandan@ti.com>
Link: https://lore.kernel.org/r/20220217181025.1815118-1-p.yadav@ti.com
The interrupt-parent for wkup_gpioX instances are wrongly assigned as
main_gpio_intr instead of wkup_gpio_intr. Fix it.
Fixes: b8545f9d3a ("arm64: dts: ti: Add initial support for J721S2 SoC")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20220203132647.11314-1-a-govindraju@ti.com
Add a device node for the RCLK Watchdog Timer (RWDT) on the Renesas
R-Car S4-8 (R8A779F0) SoC.
Extracted from a larger patch in the BSP by LUU HOAI.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/556a7f41bdadceecbe8b59b79ac7e9f592ca17a2.1642525158.git.geert+renesas@glider.be
While Juno's SCP firmware initially spoke the SCPI protocol, binary
releases since 2018, and the newer open-source codebase, only speak SCMI
and thus aren't particularly compatibile with the DTs we currently have
upstream. Add a parallel set of variant DTs for boards with up-to-date
firmware, replacing the SCPI parts with their new SCMI equivalents.
Link: https://lore.kernel.org/r/f3516815104f951a05fc0f799681f77d7968f6ac.1645125063.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The OSMC Vero 4K+ device is based on the Amlogic S905D (P230)
reference design with the following specifications:
- 2GB DDR4 RAM
- 16GB eMMC
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 10/100/1000 Ethernet
- AP6255 Wireless (802.11 a/b/g/n/ac, BT 4.2)
- 2x USB 2.0 ports (1x OTG)
- IR receiver (internal)
- IR extender port (external)
- 1x micro SD card slot
- 1x Power LED (red)
- 1x Reset button (in AV jack)
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Chad Wagner <wagnerch42@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220211105311.30320-4-christianshewitt@gmail.com
Set the usdhc root clock to 400MHz to be able to support
HS400/HS400ES modes for eMMC on phyCORE-i.MX8MP SoM.
Signed-off-by: Jonas Kuenstler <j.kuenstler@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
LDO4 is not connected so disable it. And LDO5 is used for VSEL of
the NVCC_SD2 SD-Card bus. Having it disabled seems not to have an
impact on the functionality. We enable it, as it is used.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To be able to trigger a reset also from an external source we
need to configure the WDOG pin as open drain.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Reduce drive strength on fec tx lines for signal quality improvements.
Measurements showed that TD0 and TD1 require X4 and the other lines
X2 for optimized settings.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set eMMC drive strength for USDHC3_DATA lines (200Mhz)
to X4 for signal improvement.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To fit spec requirements set minimum output impedance for dp83867
ethernet phy.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the RaspberryPi Camera v2 which is an IMX219 8MP module:
- https://datasheets.raspberrypi.com/camera/camera-v2-schematics.pdf
- has its own on-board 24MHz osc so no clock required from baseboard
- pin 11 enables 1.8V and 2.8V LDO which is connected to
GW73xx MIPI_GPIO4 (IMX8MM GPIO1_IO1) so we use this as a gpio
Support is added via a device-tree overlay.
The IMX219 supports RAW8/RAW10 image formats.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the RaspberryPi Camera v2 which is an IMX219 8MP module:
- https://datasheets.raspberrypi.com/camera/camera-v2-schematics.pdf
- has its own on-board 24MHz osc so no clock required from baseboard
- pin 11 enables 1.8V and 2.8V LDO which is connected to
GW73xx MIPI_GPIO4 (IMX8MM GPIO1_IO1) so we use this as a gpio
controlled regulator enable.
Support is added via a device-tree overlay.
The IMX219 supports RAW8/RAW10 image formats.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx8mm-venice-gw72xx-0x som+baseboard combination has a multi-protocol
RS-232/RS-485/RS-422 transceiver to an off-board connector which
can be configured in a number of ways via UART and GPIO configuration.
The default configuration per the imx8mm-venice-gw72xx-0x dts is for
UART2 TX/RX and UART4 TX/RX to be available as RS-232:
J15.1 UART2 TX out
J15.2 UART2 RX in
J15.3 UART4 TX out
J15.4 UART4 RX in
J15.5 GND
Add dt overlays to allow additional the modes of operation:
rs232-rts (UART2 RS-232 with RTS/CTS hardware flow control)
J15.1 TX out
J15.2 RX in
J15.3 RTS out
J15.4 CTS in
J15.5 GND
rs485 (UART2 RS-485 half duplex)
J15.1 TXRX-
J15.2 N/C
J15.3 TXRX+
J15.4 N/C
J15.5 GND
rs422 (UART2 RS-422 full duplex)
J15.1 TX-
J15.2 RX+
J15.3 TX+
J15.4 RX-
J15.5 GND
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx8mm-venice-gw73xx-0x som+baseboard combination has a multi-protocol
RS-232/RS-485/RS-422 transceiver to an off-board connector which
can be configured in a number of ways via UART and GPIO configuration.
The default configuration per the imx8mm-venice-gw73xx-0x dts is for
UART2 TX/RX and UART4 TX/RX to be available as RS-232:
J15.1 UART2 TX out
J15.2 UART2 RX in
J15.3 UART4 TX out
J15.4 UART4 RX in
J15.5 GND
Add dt overlays to allow additional the modes of operation:
rs232-rts (UART2 RS-232 with RTS/CTS hardware flow control)
J15.1 TX out
J15.2 RX in
J15.3 RTS out
J15.4 CTS in
J15.5 GND
rs485 (UART2 RS-485 half duplex)
J15.1 TXRX-
J15.2 N/C
J15.3 TXRX+
J15.4 N/C
J15.5 GND
rs422 (UART2 RS-422 full duplex)
J15.1 TX-
J15.2 RX+
J15.3 TX+
J15.4 RX-
J15.5 GND
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW7903 is based on the i.MX 8M Mini SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- microSD connector with UHS support
- LIS2DE12 3-axis accelerometer
- Gateworks System Controller
- IMX8M FEC
- software selectable RS232/RS485/RS422 serial transceiver
- PMIC
- 2x off-board bi-directional opto-isolated digital I/O
- 1x M.2 A-E Key Socket and 1x MiniPCIe socket with USB2.0 and PCIe
(resistor loading to route PCIe/USB2 between M.2 and MiniPCIe socket)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Layerscape SoCs contain a Security Fuse Processor which is basically a
efuse controller. Add the node, so userspace can read the efuses.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for i2c5, which is used to access the
external I2C bus on connector J22 of the imx8mp-evk.
Limit the speed to 100kHz since this is an external I2C bus.
Disabled by default, since it is shared with the CAN1 bus.
To enable i2c5, you need to disable the CAN1 function, enable the i2c5
function and also configure the CAN1/I2C5_SEL GPIO to HIGH to
select i2c5 instead of CAN1. This can be done by defining a gpio-hog
inside the pca6416 node, in your board device tree, like in this example:
&flexcan1 {
status = "disabled";
};
&i2c5 {
status = "okay";
};
&pca6416 {
can1-i2c5-sel-hog {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "can1-i2c5-sel";
};
};
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add gpio-line-names for the various GPIO's connected to the PCA6416
I/O expander on the imx8mp EVK.
This helps when using the new gpiod interface to find the GPIOs by name.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The supply-name for pwm-regualators is "pwm", so the property
needs to be pwm-supply, not vin-supply as in a number of boards.
In all cases changed here, the supplying regulator is always
an always-on fixed-regulator, so there will be no functional
change and only a change in the regulator hirarchy, as can be seen
for example in the regulator-summary.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20211227234529.1970281-2-heiko@sntech.de
Just a single fix to address coherency issue reported[1] by removing the
GICv2m address from the DMA ranges as it loose coherency if mapped as
cacheable at the SMMU due to the attribute combining rules. The GICv2m
range is normally programmed for Device memory attributes.
[1] https://lore.kernel.org/stable/0a1d437d-9ea0-de83-3c19-e07f560ad37c@arm.com/
-----BEGIN PGP SIGNATURE-----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=+vSS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=XE1F
-----END PGP SIGNATURE-----
Merge tag 'juno-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm Juno fix for v5.17
Just a single fix to address coherency issue reported[1] by removing the
GICv2m address from the DMA ranges as it loose coherency if mapped as
cacheable at the SMMU due to the attribute combining rules. The GICv2m
range is normally programmed for Device memory attributes.
[1] https://lore.kernel.org/stable/0a1d437d-9ea0-de83-3c19-e07f560ad37c@arm.com/
* tag 'juno-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Remove GICv2m dma-range
Link: https://lore.kernel.org/r/20220214142615.2375269-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AM64x SoCs have two ESM modules, with one in MAIN voltage domain and the
other in MCU voltage domain. The error output from Main ESM module can
be routed to the MCU ESM module. The error output of MCU ESM can be
configured to reset the device. The MCU ESM configuration address space
is already opened and this patch opens the MAIN ESM configuration
address space.
For ESM details please refer technical reference manual at
https://www.ti.com/lit/pdf/spruim2
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Link: https://lore.kernel.org/r/20220210172246.27871-1-hnagalla@ti.com
Specifying partitions directly in the flash node is deprecated, a
fixed-partitions node should be used instead. Therefore, it doesn't
make sense to have these properties in the flash nodes.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/20220203140240.973690-2-matthias.schiffer@ew.tq-group.com
Disable the crypto block due to it causing an SError in qce_start() on
the C630, which happens upon every boot when cryptomanager tests are
enabled.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
[bjorn: Reworked commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211105035235.2392-1-steev@kali.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIJZmoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZdoH/04d8zUhM3Fd3ACB
V/ONtOXmkfP2mEJSjb7cXTN1EM2SlOBdSnSsEw09FtGhjHABjOnLho4J5ixk9TH8
zNMNI3EMksM2T9KadHwxv8Vvp1LTrWRzMbws8tOCPA0RkOpikJfClC8CzRAyidJ3
cAbbDH/Jl1GnVZ8bpKmv2auYt+kNVGb0cwJ2W8phCwwkL7sLky5tgYeaGiJEXbJf
Tfi/3qtFdmYjD8wtYnCfzjnB7suG5nF7rGEnxCIxNi+IA4DieUv2c1KchuoaBfT9
df364VjKaGT3j+GB07ksQ/8mkwWiRXsCzOXAyMZSZaWjdMD4aAhCTJak5j7/TvGC
wtgHPww=
=/CMW
-----END PGP SIGNATURE-----
Merge 5.17-rc4 into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SCMI binding clearly states the value of #thermal-sensor-cells must
be 1. However arch/arm64/boot/dts/freescale/imx8ulp.dtsi sets it 0 which
results in the following warning with dtbs_check:
| arch/arm64/boot/dts/freescale/imx8ulp-evk.dt.yaml: scmi:
| protocol@15:#thermal-sensor-cells:0:0: 1 was expected
| From schema: Documentation/devicetree/bindings/firmware/arm,scmi.yaml
Fix it by setting it to 1 as required.
Cc:Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Fixes: a38771d7a4 ("arm64: dts: imx8ulp: add scmi firmware node")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The vpumix power domain has a reset assigned to it, however
when used, it causes a system hang. Testing has shown that
it does not appear to be needed anywhere.
Fixes: d39d4bb153 ("arm64: dts: imx8mm: add GPC node")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the second PCIe port support on i.MX8MQ EVK board.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Older Samsung Exynos SoC pin controller nodes (Exynos3250, Exynos4,
Exynos5, Exynos5433) with external wake-up interrupts, expected to have
one interrupt for multiplexing these wake-up interrupts. Also they
expected to have exactly one pin controller capable of external wake-up
interrupts.
It seems however that newer ARMv8 Exynos SoC like Exynos850 and
ExynosAutov9 have differences:
1. No multiplexed external wake-up interrupt, only direct,
2. More than one pin controller capable of external wake-up interrupts.
Use dedicated Exynos850 compatible for its external wake-up interrupts
controller to indicate the differences.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20220111201722.327219-21-krzysztof.kozlowski@canonical.com
The pin controller device node is expected to have one (optional)
interrupt. Its pin banks capable of external interrupts, should define
interrupts for each pin, unless a muxed interrupt is used.
Exynos850 defined the second part - interrupt for each pin in wake-up
pin controller - but also added these interrupts in main device node,
which is not correct.
Fixes: e3493220fd3e ("arm64: dts: exynos: Add initial Exynos850 SoC support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211230195325.328220-3-krzysztof.kozlowski@canonical.com
The baseboard supports a PCIe slot with a 100MHz reference clock,
but it's controlled by a different GPIO, so a gated clock is
required.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The PineNote is a tablet from Pine64 based on the RK3566 SoC, featuring
4G/128G of storage, a 10.3" electrophoretic display (EPD) with two-color
frontlight, both EMR and capacitive digitizers, dual-band wireless,
quad-channel digital microphones, and stereo speakers.
There are two existing variants of the board. v1.1 was contained in some
early samples, and v1.2 was sold as the "PineNote Developer Edition".
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220130053803.43660-3-samuel@sholland.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
rk356x contains a PDM microphone controller which is compatible with the
existing rockchip,pdm binding. Add its node.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220130053803.43660-2-samuel@sholland.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
BCM4908 has the same watchdog as BCM63xx devices. Use "brcm,bcm6345-wdt"
binding which matches the first SoC with that block.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This adds a reference to the dts of the Raspberry Pi Zero 2 W,
so we don't need to maintain the content in arm64.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enable the GPU core on the Pine64 Quartz64 Model A.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220209215549.94524-5-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK356x SoCs have a second thermal sensor for the GPU. This adds the
cooling map and trip points for it to make use of its contribution as
a cooling device.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220209215549.94524-4-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rockchip SoCs RK3566 and RK3568 have a Mali Gondul core
which is based on the Bifrost architecture. It has
one shader core and two execution engines.
Quoting the datasheet:
Mali-G52 1-Core-2EE
* Support 1600Mpix/s fill rate when 800MHz clock frequency
* Support 38.4GLOPs when 800MHz clock frequency
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220209215549.94524-3-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds the device tree to support Toradex Verdin iMX8M Mini a
computer on module which can be used on different carrier boards.
The module consists of an NXP i.MX 8M Mini family SoC (either i.MX 8M
Mini Quad or 8M Mini DualLite), a PCA9450A PMIC, a Gigabit Ethernet PHY,
1 or 2 GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC, an I2C EEPROM, an
RX8130 RTC, an optional SPI CAN controller plus an optional Bluetooth/
Wi-Fi module.
Anything that is not self-contained on the module is disabled by
default.
The device tree for the Dahlia includes the module's device tree and
enables the supported peripherals of the carrier board.
The device tree for the Verdin Development Board includes the module's
device tree as well as the Dahlia one as it is a superset and supports
almost all peripherals available.
So far there is no display functionality supported at all but basic
console UART, PCIe, USB host, eMMC and Ethernet and PCIe functionality
work fine.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add interrupt controller mode for the pca6416 on i.MX8MP EVK board's.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With commit 15d16d6dad ("kbuild: Add generic rule to apply
fdtoverlay"), overlay target can be used to simplify the build of DTB
overlays. It also performs a cross check to ensure base DT and overlay
actually match.
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
As suggested by commit 9ae8578b51 ("of: Documentation: change overlay
example to use current syntax"), there is no need to have overlay syntax
be hard coded in the device tree source file any more.
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Add the Embedded USB Debugger(EUD) device tree node. The
node contains EUD base register region and EUD mode
manager register regions along with the interrupt entry.
Also add the typec connector node for EUD which is attached to
EUD node via port. EUD is also attached to DWC3 node via port.
Also add the role-switch property to dwc3 node.
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Link: https://lore.kernel.org/r/b2b6bdf0e7589a7b6a6f9b390b227339636e0da9.1644339918.git.quic_schowdhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DWC2 USB controller on the Agilex platform does not support clock
gating, so use the chip specific "intel,socfpga-agilex-hsotg"
compatible.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220125161821.1951906-3-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for the emtrion GmbH emCON-MX8M Mini modules.
They are available with NXP i.MX 8M Mini equipped with 2 or 4 GB Memory.
The devicetree imx8mm-emcon.dtsi is the common part providing all
module components and the basic support for the SoC. The support for the
avari baseboard in the developer-kit configuration is provided by the
emcon-avari dts files.
Signed-off-by: Reinhold Mueller <reinhold.mueller@emtrion.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are two decoders on the i.MX8M Mini controlled by the
vpu-blk-ctrl. The G1 supports H264 and VP8 while the
G2 support HEVC and VP9.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With the Hantro G1 and G2 now setup to run independently, update
the device tree to allow both to operate. This requires the
vpu-blk-ctrl node to be configured. Since vpu-blk-ctrl needs
certain clock enabled to handle the gating of the G1 and G2
fuses, the clock-parents and clock-rates for the various VPU's
to be moved into the pgc_vpu because they cannot get re-parented
once enabled, and the pgc_vpu is the highest in the chain.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The vpu is enabled by default, so there is no need to manually
enable it.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ls1028a QDS board support different pluggable PHY cards. Define the
nodes for these slots to be updated at boot time with overlay according
to board setup.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add gpio-line-names for the various GPIO's used on Gateworks Venice
boards. Note that these GPIO's are typically 'configured' in Boot
Firmware via gpio-hog therefore we only configure line names to keep the
boot firmware configuration from changing on kernel init.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit 9a0f3b157e ("arm64: dts: imx8mn: Enable GPU")
imx8mn-venice-gw7902 will hang during kernel init because it uses
a MIMX8MN5CVTI which does not have a GPU.
Disable pgc_gpumix to work around this. We also disable the GPU devices
that depend on the gpumix power domain and pgc_gpu to avoid them staying
in a probe deferred state forever.
Cc: Adam Ford <aford173@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Fixes: 9a0f3b157e ("arm64: dts: imx8mn: Enable GPU")
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8M Mini Application Processor Reference Manual, Rev. 3, 11/2020
documents AF MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B , add it into the
pinmux tables.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Like usb3_phy0 the default state of the usb3_phy1 should be disabled, so
it is only enabled on boards exposing this USB port.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The driver differs from clocks point of view, so the i.MX8QXP
is not backwards compatible with i.MX7ULP.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add mu5/6 for i.MX8QXP/QM, these two mu will be used for
communicating with general purpose Cortex-M4 cores.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The slew rate and drive-strength of the i2c3 pads were much too
high. Bring them down to avoid signal quality issues.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for the internal display of the Reform2 Laptop, which
is connected to the i.MX8MQ via a MIPI-DSI->eDP bridge chip. Clocking
is derived from a system PLL, which provides quite good rate matching
for the single supported display mode and keeps the video PLL free for
usage with the external display, which isn't supported yet.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Without a OPP table or a downstream TF-A running on the system the DDRC will
fail to probe, as it has no means to scale the DRAM frequency in that case.
This however will block the bus scaling driver to come up and this in turn
prevents other devices that hook into the interconnect from probing.
If the DDRC is disabled, the interconnect driver will simply ignore it. As
most systems don't want to scale the DRAM frequency, disable the node by
default and only enable it on the systems that actually uses this
capability and provides a valid OPP table in the DT.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Protonic PRT8MM is a low-cost agricultural Virtual Terminal. This
commit adds most of the board functionality sans the display output,
as the i.MX8MM display support isn't ready yet.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The CPU 'arm,armv8' compatible is only for s/w models, so remove it from
i.MX8QM CPU nodes.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add PCIe support to GW71xx/GW72xx/GW73xx/GW7901/GW7902
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8M-Nano features a GC7000. The Etnaviv driver detects it as:
etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6203
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the DT node for the DISP blk-ctrl. With this in place the
display/mipi power domains should be functional.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that we have support for the power domain controller on the i.MX8MN,
we can put the USB controller in the respective power domain to allow
it to power down the PHY when possible.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the DT node for the GPC, including all the PGC power domains,
some of them are not fully functional yet, as they require interaction
with the blk-ctrls to properly power up/down the peripherals.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the PCIe support on iMX8MM EVK boards.
And set the default reference clock mode.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the PCIe support on i.MX8MM platforms.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the PCIe PHY support on iMX8MM platforms.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
clock-frequency for IPQ6018 SoCs should be 24MHz, not 19.2MHz. Rather
than correcting it, drop the property itself since its already
configured by the bootloader.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1643819709-5410-3-git-send-email-quic_kathirav@quicinc.com
Rename CPU and CPR OPP table node names to match the nodename pattern
defined in the opp-v2-base DT schema.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220203072226.51482-7-y.oudjana@protonmail.com
Rename cluster OPP table node names to match the nodename pattern
defined in the opp-v2-base DT schema.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220203072226.51482-6-y.oudjana@protonmail.com
GIC used in the IPQ6018 SoCs has one instance of the GICv2m extension,
which supports upto 32 MSI interrupts. Lets add support for the same.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1644334525-11577-3-git-send-email-quic_kathirav@quicinc.com
GIC used in the IPQ8074 SoCs has one instance of the GICv2m extension,
which supports upto 32 MSI interrupts. Lets add support for the same.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1644334525-11577-2-git-send-email-quic_kathirav@quicinc.com
This reverts commit 0c566618e2,
this one was meant for v5.18, not as a bugfix, though the
patch itself was correct.
Reported-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes dtbs_check warnings like:
pdma@ffda0000: $nodename:0: 'pdma@ffda0000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Fixes dtbs_check warnings like:
pdma@ffda0000: $nodename:0: 'pdma@ffda0000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The DWC2 USB controller on the Agilex platform does not support clock
gating, so use the chip specific "intel,socfpga-agilex-hsotg"
compatible.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Align the LED node names with dtschema to silence dtbs_check warnings
like:
leds: 'hps0', 'hps1', 'hps2' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Synopsys DW MSHC bindings require node name to be 'mmc':
dwmmc0@ff808000: $nodename:0: 'dwmmc0@ff808000' does not match '^mmc(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Intel SoCFPGA N5X SoC Development Kit is a board with
Agilex, so it needs its own compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Intel SoCFPGA Agilex 10 SoC Development Kit is a board with
Agilex, so it needs its own compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The devicetree specification requires that node name should be generic.
The dtschema complains if name does not match pattern, so make the
0.33 V regulator node name more generic.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Synopsys DW MSHC bindings require node name to be 'mmc':
dwmmc0@ff808000: $nodename:0: 'dwmmc0@ff808000' does not match '^mmc(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The ARM timer is usually considered not part of SoC node, just like
other ARM designed blocks (PMU, PSCI). This fixes dtbs_check warning:
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dt.yaml: soc: timer:
{'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 13, 3848], [1, 14, 3848], [1, 11, 3848], [1, 10, 3848]]} should not be valid under {'type': 'object'}
From schema: dtschema/schemas/simple-bus.yaml
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Altera SoCFPGA Stratix 10 SoC Development Kit is a board with
Stratix 10, so it needs its own compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
With the newly introduced aux-bus under the TI SN65DSI86 the panel
node should be described as a child instead of a standalone node, move
it there.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://lore.kernel.org/r/20220208041606.144039-2-bjorn.andersson@linaro.org
The Lenovo Yoga C630 uses the PWM controller in the TI SN65DSI86 bridge
chip to provide a signal for the backlight control and has TLMM GPIO 11
attached to some regulator that drives the backlight.
Unfortunately the regulator attached to this gpio is also powering the
camera, so turning off backlight result in the detachment of the camera
as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://lore.kernel.org/r/20220208041606.144039-1-bjorn.andersson@linaro.org
All nodes and handles related to USB have the prefix usb or usb2,
whereas the phy handles are prefixed with u2phy. Rename for
consistency reasons and to facilitate sorting.
This patch also updates the handles in the only board file that
uses them (rk3566-quartz64-a.dts).
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220127190456.2195527-1-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds Devicetree for Bananapi R2 Pro based on RK3568.
Add uart/sd/emmc/i2c/rk809/tsadc nodes for basic function.
Gmac0 is directly connected to wan-port so usable without additional
driver.
On gmac1 there is a switch (rtl8367rb) connected which have not yet a
driver in mainline.
Patch also prepares nodes for GPIO header.
Co-developed-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220123135116.136846-3-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Firefly RK3399 device tree had the GPU status set to disabled as per
the default from the rk3399.dtsi. This patch sets the status in the
firefly dts to enable it for use. Tested successfully on a 2GB Firefly
RK3399 board.
Signed-off-by: Michael Saunders <mick.saunders@gmail.com>
Link: https://lore.kernel.org/r/20220207073617.7386-1-mick.saunders@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Instead of manually setting snps,ref-clock-period-ns, we can let the
driver calculate it automatically from the "ref" clock. I haven't
reviewed this board's schematics, so please let me know if this is the
wrong 24MHz clock to use.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20220127200636.1456175-8-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These clocks are not used by the dwc3-xilinx driver except to
enable/disable them. Move them to the dwc3 node so its driver can use
them to configure the reference clock period.
Tested-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20220127200636.1456175-7-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
