This commit adds compatibles used in H6 display pipeline, namely for
display engine, mixer and TV TCON.
H6 display engine is somewhat similar to R40, just less TCONs and
mixer support more features.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-8-jernej.skrabec@siol.net
The Allwinner H6 DE3 bus is similar to the A64 DE2 one.
Add its compatible string with the A64 string as fallback to the
binding.
Some description of the binding is modified to make it more generic.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
[Fixed compatible name]
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-2-jernej.skrabec@siol.net
This adds a new binding for Himax HX8357D display panels. It includes
a compatible string for one display (more can be added in the future).
The YX350HV15 panel[1] is found in the Adafruit PiTFT 3.5" Touch
Screen for Raspberry Pi.
[1] https://learn.adafruit.com/adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi/downloads
This binding is closely modeled after the ili9341 binding, for a
similar product from adafruit. The primary difference is that the
hx8357d doesn't have a reset line that I can find in the schematics.
v2: Document the "reg" property (requested by Rob), fix commit message
typo (Noralf)
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-2-eric@anholt.net
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Add the device tree bindings for Truly NT35597 panel driver. This panel
driver supports both single DSI and dual DSI.
However, this patch series supports only dual DSI.
Changes in v10:
- Remove active high in the documentation for mode gpio
- Fix commmit text detail about the board and also
fix a typo
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1538787139-28122-2-git-send-email-abhinavk@codeaurora.org
4.19 is out, Lyude asked for a backmerge, and it's been a while. All
very good reasons on their own :-)
Signed-off-by: Sean Paul <seanpaul@chromium.org>
-----BEGIN PGP SIGNATURE-----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=dMl4
-----END PGP SIGNATURE-----
BackMerge v4.19-rc6 into drm-next
I have some pulls based on rc6, and I prefer to have an explicit backmerge.
Signed-off-by: Dave Airlie <airlied@redhat.com>
- This patch series enables out-bridge for LVDS bridge device support,
and also includes two cleanups and one relevant dt binding update
for this.
Add Samsung 16x16 tiled format support
- This patch series adds Samsung 16x16 tiled format to scaler and
gsc drivers. As for this, it adds Samsung specific format to
drm_forcc.h header. For the git-pull request with relevant patches,
I requested ack-by[1] to relevant maintainers but there was no any response.
I'm pretty sure no problem to go to mainline though Exynos tree
because the only user of it is Exynos.
[1] https://patchwork.freedesktop.org/patch/243921/
Add configurable plane alpha and pixel blend mode support
- This patch series makes mixer driver to be configuragle for
pixel blend mode and plane alpha, which also includes one fixup
to set all default values correctly after reset.
One cleanup
- This patch replaces drm_atomic_helper_suspend/resume() with
drm_mode_config_helper_suspend/resume() to remove exynos specific
suspend_state.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aoJQ
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Add out-bridge support
- This patch series enables out-bridge for LVDS bridge device support,
and also includes two cleanups and one relevant dt binding update
for this.
Add Samsung 16x16 tiled format support
- This patch series adds Samsung 16x16 tiled format to scaler and
gsc drivers. As for this, it adds Samsung specific format to
drm_forcc.h header. For the git-pull request with relevant patches,
I requested ack-by[1] to relevant maintainers but there was no any response.
I'm pretty sure no problem to go to mainline though Exynos tree
because the only user of it is Exynos.
(airlied: this looked fine to me)
[1] https://patchwork.freedesktop.org/patch/243921/
Add configurable plane alpha and pixel blend mode support
- This patch series makes mixer driver to be configuragle for
pixel blend mode and plane alpha, which also includes one fixup
to set all default values correctly after reset.
One cleanup
- This patch replaces drm_atomic_helper_suspend/resume() with
drm_mode_config_helper_suspend/resume() to remove exynos specific
suspend_state.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538380891-24040-1-git-send-email-inki.dae@samsung.com
Dmitry writes:
"Input updates for v4.19-rc5
Just a few driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: uinput - allow for max == min during input_absinfo validation
Input: elantech - enable middle button of touchpad on ThinkPad P72
Input: atakbd - fix Atari CapsLock behaviour
Input: atakbd - fix Atari keymap
Input: egalax_ts - add system wakeup support
Input: gpio-keys - fix a documentation index issue
The rk3328 uses a dw-hdmi controller with an external hdmi phy from
Innosilicon which uses the generic phy framework for access.
Add the necessary data and the compatible for the rk3328 to the
rockchip dw-hdmi driver.
changes in v5:
- disable CEC_5V option to make CEC actually work (Jonas)
changes in v3:
- reword as suggested by Rob to show that it's a dw-hdmi + Inno phy
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-7-heiko@sntech.de
Some newer Rockchip SoCs use an Innosilicon hdmiphy accessed via general
mmio, so allow these to be referenced via the regular phy interfaces
and therefore add optional phy-related properties to the binding.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-4-heiko@sntech.de
This patch adds Olimex Ltd. LCD-OLinuXino bridge panel driver. The panel
is used with different LCDs (currently from 480x272 to 1280x800). A
small EEPROM chip is used for identification, which holds some factory
data and timing requirements.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531383729-13932-1-git-send-email-stefan@olimex.com
This panel is marketed as Banana Pi 7" LCD display. On the back is
a sticker denoting the model name S070WV20-CT16.
This is a 7" 800x480 panel connected through a 24-bit RGB interface.
However the panel only does 262k colors.
Depending on the variant, the PCB attached to the panel module either
supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via
an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel
itself.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-5-wens@csie.org
R40 DE2 mixers are similar to those found in A83T, except it needs
different clock settings.
Add a compatibles for them.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-14-jernej.skrabec@siol.net
On the D3 and E3 SoCs, the LVDS encoder can derive its internal pixel
clock from an externally supplied clock, either through the EXTAL pin or
through one of the DU_DOTCLKINx pins. Add corresponding clocks to the DT
bindings.
To retain backward compatibility with DT that don't specify the
clock-names property, the functional clock must always be specified
first, and the clock-names property is optional when only the functional
clock is specified.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Of-graph bindings should describe ports present in the device, not the
devices it can be connected to. The patch replaces verbose description
with shorter but more precise one. While at it clock related properties
are moved to the main node as it is their actual location.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
-----BEGIN PGP SIGNATURE-----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=vSV4
-----END PGP SIGNATURE-----
Merge tag 'du-next-20180914' of git://linuxtv.org/pinchartl/media into drm-next
R-Car DU changes for v4.20
The pull request mostly contains updates to the R-Car DU driver, notably
support for interlaced modes on Gen3 hardware, support for the LVDS output on
R8A77980, and a set of miscellaneous bug fixes. There are also two SPDX
conversion patches for the drm shmobile and panel-lvds drivers, as well as an
update to MAINTAINERS to add Kieran Bingham as a co-maintainer for the DU
driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3273568.LdoAI77IYW@avalon
UAPI Changes:
- None
Cross-subsystem Changes:
- None
Core Changes:
- Allow drivers to disable features with per-device granularity (Ville)
- Use EOPNOTSUPP when iface/feature is unsupported instead of
EINVAL/errno soup (Chris)
- Simplify M/N DP quirk by using constant N to limit size of M/N (Shawn)
- add quirk for LG LP140WF6-SPM1 eDP panel (Shawn)
Driver Changes:
- i915/amdgpu: Disable DRIVER_ATOMIC for older/unsupported devices (Ville)
- sun4i: add support for R40 HDMI PHY (Icenowy)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Lee, Shawn C <shawn.c.lee@intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAluiqZAACgkQlvcN/ahK
BwrD7gf+O9hI1+sWAKs9/D2xz5G0Ap/wTUtPZprVx+UMg833T4E3q5esSTvlKd5q
QdijWWFZ3Eu7osQB5QTvCHpJ1F1Q9DScYdD5rd0WRhZBGnBd2guFziFRhleXpQH1
CTo/xjS4Y1l1wEildvZdjPaDfXE0Q+uK8kl11AIVoYQvW6V28/pwCW+mmfMfQG4D
lC9Lj5iPTDGLmbT3DZcH9ZUU8CZreJVPDn+mi8XsAOGt55YlCphl5XsOabNRzpCh
5VYZbauJqrlfa3/cbVuFpTqjqR5XRlMvzgdYH2Wa+9JreiReNCDs3CVL4YnLWe0p
PIfE6ZC2ucX831aZOodV7KtwtLYc/Q==
=oPPq
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-09-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.20:
UAPI Changes:
- None
Cross-subsystem Changes:
- None
Core Changes:
- Allow drivers to disable features with per-device granularity (Ville)
- Use EOPNOTSUPP when iface/feature is unsupported instead of
EINVAL/errno soup (Chris)
- Simplify M/N DP quirk by using constant N to limit size of M/N (Shawn)
- add quirk for LG LP140WF6-SPM1 eDP panel (Shawn)
Driver Changes:
- i915/amdgpu: Disable DRIVER_ATOMIC for older/unsupported devices (Ville)
- sun4i: add support for R40 HDMI PHY (Icenowy)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20180919200218.GA186644@art_vandelay
The Allwinner R40 HDMI PHY is currently the only one that seems to be
able to select between two PLL inputs.
Add a compatible string for it, and the pll-1 clock input definition.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180916043409.62374-3-icenowy@aosc.io
gpio_keys.c now exists in the drivers/input/keyboard/ rather than
drivers/input/.
Signed-off-by: Song Qiang <songqiang.1304521@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We need this new compatibility string as we experienced different behavior
for this 10/100Mbits/s macb interface on this particular SoC.
Backward compatibility is preserved as we keep the alternative strings.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document the R-Car V3H (R8A77980) SoC in the R-Car DU bindings; the DU
hardware has the same topology as in the R-Car V3M (R8A77970).
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Pull i2c fixes from Wolfram Sang:
- bugfixes for uniphier, i801, and xiic drivers
- ID removal (never produced) for imx
- one MAINTAINER addition
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Record xilinx i2c with Zynq fragment
i2c: xiic: Make the start and the byte count write atomic
i2c: i801: fix DNV's SMBCTRL register offset
i2c: imx-lpi2c: Remove mx8dv compatible entry
dt-bindings: imx-lpi2c: Remove mx8dv compatible entry
i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP
i2c: uniphier: issue STOP only for last message or I2C_M_STOP
The rk3188 has 2 vops not using iommus which only output directly
to a rgb interface per vop. So all other output modes like hdmi
are provided by external brige chips.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830110937.1739-1-heiko@sntech.de
Allwiner SoCs with DesignWare HDMI controller all come with a "HVCC"
pin, which is the VCC of HDMI part.
Add a supply property to specify HVCC's regulator in the device tree.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904044053.15425-10-icenowy@aosc.io
The HDMI controller on Allwinner A64 is similar on the one on
H3/H5/A83T (although the PHY is different with A83T).
Add A64 compatible and append A83T compatible as fallback.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[Icenowy: refactor commit log]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904044053.15425-7-icenowy@aosc.io
Allwinner A64 has a DE2 display pipeline. The TCONs are similar to the
ones in A83T, but the mixers are new (similar to the later R40 SoC).
This patch adds dt-binding documentation for A64 DE2 display pipeline.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[Icenowy: Refactor and also cover TCON1]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904044053.15425-4-icenowy@aosc.io
Pull networking fixes from David Miller:
1) Must perform TXQ teardown before unregistering interfaces in
mac80211, from Toke Høiland-Jørgensen.
2) Don't allow creating mac80211_hwsim with less than one channel, from
Johannes Berg.
3) Division by zero in cfg80211, fix from Johannes Berg.
4) Fix endian issue in tipc, from Haiqing Bai.
5) BPF sockmap use-after-free fixes from Daniel Borkmann.
6) Spectre-v1 in mac80211_hwsim, from Jinbum Park.
7) Missing rhashtable_walk_exit() in tipc, from Cong Wang.
8) Revert kvzalloc() conversion of AF_PACKET, it breaks mmap() when
kvzalloc() tries to use kmalloc() pages. From Eric Dumazet.
9) Fix deadlock in hv_netvsc, from Dexuan Cui.
10) Do not restart timewait timer on RST, from Florian Westphal.
11) Fix double lwstate refcount grab in ipv6, from Alexey Kodanev.
12) Unsolicit report count handling is off-by-one, fix from Hangbin Liu.
13) Sleep-in-atomic in cadence driver, from Jia-Ju Bai.
14) Respect ttl-inherit in ip6 tunnel driver, from Hangbin Liu.
15) Use-after-free in act_ife, fix from Cong Wang.
16) Missing hold to meta module in act_ife, from Vlad Buslov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits)
net: phy: sfp: Handle unimplemented hwmon limits and alarms
net: sched: action_ife: take reference to meta module
act_ife: fix a potential use-after-free
net/mlx5: Fix SQ offset in QPs with small RQ
tipc: correct spelling errors for tipc_topsrv_queue_evt() comments
tipc: correct spelling errors for struct tipc_bc_base's comment
bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.
bnxt_en: Clean up unused functions.
bnxt_en: Fix firmware signaled resource change logic in open.
sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel
sctp: fix invalid reference to the index variable of the iterator
net/ibm/emac: wrong emac_calc_base call was used by typo
net: sched: null actions array pointer before releasing action
vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition
r8169: add support for NCube 8168 network card
ip6_tunnel: respect ttl inherit for ip6tnl
mac80211: shorten the IBSS debug messages
mac80211: don't Tx a deauth frame if the AP forbade Tx
mac80211: Fix station bandwidth setting after channel switch
mac80211: fix a race between restart and CSA flows
...
mx8dv never entered into production and there is no other place
in the kernel referring to this SoC, so remove it from the
dt bindings documentation.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The current cpsw usage for cpsw-phy-sel is undocumented but is used for
all the boards using cpsw. And cpsw-phy-sel is not really a child of
the cpsw device, it lives in the system control module instead.
Let's document the existing usage, and improve it a bit where we prefer
to use a phandle instead of a child device for it. That way we can
properly describe the hardware in dts files for things like genpd.
Cc: devicetree@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAluKTH8ACgkQ+iyteGJfRspLOgCgybxs7ktaE4RFal8KM7X8g5sB
wVEAoMQ1IlQFkuxhJmHt8YemhRL3JqWC
=cMKd
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-4.19-rc2' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixlet from Wim Van Sebroeck:
"Document support for r8a774a1"
* tag 'linux-watchdog-4.19-rc2' of git://www.linux-watchdog.org/linux-watchdog:
dt-bindings: watchdog: renesas-wdt: Document r8a774a1 support
Add support for the R7S9210 which is part of the RZ/A2 series.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
I managed to miss one of Rob's code reviews on the mailing list
<http://lists.infradead.org/pipermail/linux-riscv/2018-August/001139.html>.
The patch has already been merged, so I'm submitting a fixup.
Sorry!
Fixes: b67bc7cb40 ("dt-bindings: interrupt-controller: RISC-V local interrupt controller")
Cc: Rob Herring <robh@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Karsten Merker <merker@debian.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
With bus-type/bus-width properties in the endpoint nodes, the video-
interface of the connection can be specified for cases where the
heuristic fails to select the correct output mode. This can happen
e.g. if not all RGB pins are routed on the PCB; the driver has no
way of knowing this, and needs to be told explicitly.
This is critical for the devices that have the "conflicting output
formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant
RGB bits move around depending on the selected output mode. For
devices that do not have the "conflicting output formats" issue
(SAMA5D2, SAMA5D4), this is completely irrelevant.
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180825085620.10566-3-peda@axentia.se
Start list of actual chips compatible with "lvds-encoder".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180825085620.10566-2-peda@axentia.se
Pull irq update from Thomas Gleixner:
"A small set of updats/fixes for the irq subsystem:
- Allow GICv3 interrupts to be configured as wake-up sources to
enable wakeup from suspend
- Make the error handling of the STM32 irqchip init function work
- A set of small cleanups and improvements"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Allow interrupt to be configured as wake-up sources
irqchip/tango: Set irq handler and data in one go
dt-bindings: irqchip: renesas-irqc: Document r8a774a1 support
irqchip/s3c24xx: Remove unneeded comparison of unsigned long to 0
irqchip/stm32: Fix init error handling
irqchip/bcm7038-l1: Hide cpu offline callback when building for !SMP
A couple of late-merged changes that would be useful to get in this
merge window:
- Driver support for reset of audio complex on Meson platforms. The
audio driver went in this merge window, and these changes have been
in -next for a while (just not in our tree).
- Power management fixes for IOMMU on Rockchip platforms, getting
closer to kexec working on them, including Chromebooks.
- Another pass updating "arm,psci" -> "psci" for some properties that
have snuck in since last time it was done.
-----BEGIN PGP SIGNATURE-----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=dQaG
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late updates from Olof Johansson:
"A couple of late-merged changes that would be useful to get in this
merge window:
- Driver support for reset of audio complex on Meson platforms. The
audio driver went in this merge window, and these changes have been
in -next for a while (just not in our tree).
- Power management fixes for IOMMU on Rockchip platforms, getting
closer to kexec working on them, including Chromebooks.
- Another pass updating "arm,psci" -> "psci" for some properties that
have snuck in since last time it was done"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
iommu/rockchip: Move irq request past pm_runtime_enable
iommu/rockchip: Handle errors returned from PM framework
arm64: rockchip: Force CONFIG_PM on Rockchip systems
ARM: rockchip: Force CONFIG_PM on Rockchip systems
arm64: dts: Fix various entry-method properties to reflect documentation
reset: imx7: Fix always writing bits as 0
reset: meson: add meson audio arb driver
reset: meson: add dt-bindings for meson-axg audio arb
Pull libata updates from Tejun Heo:
"Nothing too interesting. Mostly ahci and ahci_platform changes, many
around power management"
* 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits)
ata: ahci_platform: enable to get and control reset
ata: libahci_platform: add reset control support
ata: add an extra argument to ahci_platform_get_resources()
ata: sata_rcar: Add r8a77965 support
ata: sata_rcar: exclude setting of PHY registers in Gen3
ata: sata_rcar: really mask all interrupts on Gen2 and later
Revert "ata: ahci_platform: allow disabling of hotplug to save power"
ata: libahci: Allow reconfigure of DEVSLP register
ata: libahci: Correct setting of DEVSLP register
ata: ahci: Enable DEVSLP by default on x86 with SLP_S0
ata: ahci: Support state with min power but Partial low power state
Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc"
ata: sata_rcar: Add rudimentary Runtime PM support
ata: sata_rcar: Provide a short-hand for &pdev->dev
ata: Only output sg element mapped number in verbose debug
ata: Guard ata_scsi_dump_cdb() by ATA_VERBOSE_DEBUG
ata: ahci_platform: convert kcalloc to devm_kcalloc
ata: ahci_platform: convert kzallloc to kcalloc
ata: ahci_platform: correct parameter documentation for ahci_platform_shutdown
libata: remove ata_sff_data_xfer_noirq()
...
Including:
- PASID table handling updates for the Intel VT-d driver. It
implements a global PASID space now so that applications
usings multiple devices will just have one PASID.
- A new config option to make iommu passthroug mode the default.
- New sysfs attribute for iommu groups to export the type of the
default domain.
- A debugfs interface (for debug only) usable by IOMMU drivers
to export internals to user-space.
- R-Car Gen3 SoCs support for the ipmmu-vmsa driver
- The ARM-SMMU now aborts transactions from unknown devices and
devices not attached to any domain.
- Various cleanups and smaller fixes all over the place.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TeYQ
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- PASID table handling updates for the Intel VT-d driver. It implements
a global PASID space now so that applications usings multiple devices
will just have one PASID.
- A new config option to make iommu passthroug mode the default.
- New sysfs attribute for iommu groups to export the type of the
default domain.
- A debugfs interface (for debug only) usable by IOMMU drivers to
export internals to user-space.
- R-Car Gen3 SoCs support for the ipmmu-vmsa driver
- The ARM-SMMU now aborts transactions from unknown devices and devices
not attached to any domain.
- Various cleanups and smaller fixes all over the place.
* tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (42 commits)
iommu/omap: Fix cache flushes on L2 table entries
iommu: Remove the ->map_sg indirection
iommu/arm-smmu-v3: Abort all transactions if SMMU is enabled in kdump kernel
iommu/arm-smmu-v3: Prevent any devices access to memory without registration
iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA
iommu/ipmmu-vmsa: Clarify supported platforms
iommu/ipmmu-vmsa: Fix allocation in atomic context
iommu: Add config option to set passthrough as default
iommu: Add sysfs attribyte for domain type
iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register
iommu/arm-smmu: Error out only if not enough context interrupts
iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE
iommu/io-pgtable-arm: Fix pgtable allocation in selftest
iommu/vt-d: Remove the obsolete per iommu pasid tables
iommu/vt-d: Apply per pci device pasid table in SVA
iommu/vt-d: Allocate and free pasid table
iommu/vt-d: Per PCI device pasid table interfaces
iommu/vt-d: Add for_each_device_domain() helper
iommu/vt-d: Move device_domain_info to header
iommu/vt-d: Apply global PASID in SVA
...
