Almost all default rtd->xxx are setup at soc_new_pcm_runtime()
which is sub-function of snd_soc_add_pcm_runtime() (A).
But "rtd->pmdown_time" is setup at soc_init_pcm_runtime() (B).
It is very random timing setup. This patch setup it at (A),
same as other rtd->xxx.
static int snd_soc_bind_card(...)
{
...
for_each_card_prelinks(...) {
(A) ret = snd_soc_add_pcm_runtime(...);
...
}
...
for_each_card_rtds(...) {
(B) ret = soc_init_pcm_runtime(...);
...
}
...
}
One note is that current topology/intel are directly calling
snd_soc_add_pcm_runtime() (A) without calling soc_init_pcm_runtime() (B).
This means, its "rtd->pmdown_time settings" was 0, but will have default
value by this patch.
"rtd->pmdown_time settings" will be used at
snd_soc_runtime_ignore_pmdown_time(). This patch adds
"ignore_pmdown_time" to these driver to keep compatibility.
bool snd_soc_runtime_ignore_pmdown_time(...)
{
...
=> if (!rtd->pmdown_time || rtd->dai_link->ignore_pmdown_time)
return true;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875yhxmjjd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snprintf() returns the would-be-filled size when the string overflows
the given buffer size, hence using this value may result in a buffer
overflow (although it's unrealistic).
This patch replaces it with a safer version, scnprintf() for papering
over such a potential issue.
Fixes: f1b3b320bd ("ASoC: Intel: avs: Generic soc component driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220801165420.25978-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
As reported by Nathan, when building avs driver using clang with:
CONFIG_COMPILE_TEST=y
CONFIG_FORTIFY_SOURCE=y
CONFIG_KASAN=y
CONFIG_PCI=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_INTEL_AVS=y
there are reports of too big stack use, like:
sound/soc/intel/avs/path.c:815:18: error: stack frame size (2176) exceeds limit (2048) in 'avs_path_create' [-Werror,-Wframe-larger-than]
struct avs_path *avs_path_create(struct avs_dev *adev, u32 dma_id,
^
1 error generated.
This is apparently caused by inlining many calls to guid_equal which
inlines fortified memcpy, using 2 size_t variables.
Instead of hardcoding many calls to guid_equal, use lookup table with
one call, this improves stack usage.
Link: https://lore.kernel.org/alsa-devel/YtlzY9aYdbS4Y3+l@dev-arch.thelio-3990X/T/
Link: https://github.com/ClangBuiltLinux/linux/issues/1642
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Build-tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220722111959.2588597-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Module unloading operation performs memory unmapping and the weight of
the opration does not different from any other standard IPC. There is no
dependency on secondary task like in module loading scenario where
larger message timeout is recommended.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dma_set_mask() and dma_set_coherent_mask() can be performed with one
call to dma_set_mask_and_coherent(), which slightly reduces amount of
code on our side.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To allow for driver's filesystem interfaces e.g.: debugfs, to be touched
even when the device is asleep, mark IPC-channel as blocked when the
device is suspended. This causes any invocation of said interfaces that
do not toggle PM themselves to gracefully fail with "Operation not
permitted" message.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some LARGE_CONFIG_GETs are never expected to return payload of size 0.
Check for such situation and collapse if met.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to copy number of bytes specified by IPC message caller
if DSP firmware returned lower number. In consequence, LARGE_CONFIG_GET
handler is simplified.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid any false positives when checking CPA after setting SPA, do a
short wait. For stall operation, give HW more time to propagate the
change before moving on.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For formatted port - ssp%d - descriptions to have an effect, copier
module templates need to be updated with specified port value. This
value is later propagated to the firmware when module instances are
being instantiated.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update printf formatting as 'ssp_port' argument is of type 'int', not
'long int'.
Fixes: e39acc4cfd ("ASoC: Intel: avs: Add I2S-test machine board")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706062952.251704-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit e39acc4cfd ("ASoC: Intel: avs: Add I2S-test machine board") adds
the config "SND_SOC_INTEL_AVS_MACH_I2S_TEST", but in the Makefile refers
to config "SND_SOC_INTEL_AVS_MACH_i2s_TEST" (notice the uppercase and
lowercase difference).
Adjust the Makefile to refer to the actual existing config.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220705103238.7484-1-lukas.bulwahn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-82-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow for testing audio streaming over I2S interface through SSP
loopback. No actual codec is needed here as board is intended for SSP
loopback scenarios only. One playback and one capture endpoint is
exposed per SSP port.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Connect AVS driver with ASoC HDAudio codec with help of this machine
board. Similarly to its platform and codec components, DAI links and
routes are being created dynamically so single board can be used across
all HDAudio codec types.
Card makes use of "binder" BE DAI Link so HDAudio codec driver can be
listed as one of its components. This allows for BE DAIs to be created
dynamically, based on HDAudio codec capabilities.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On some platforms (i.e. arc, m68k and sparc) __fls returns an int (while
on most platforms it returns an unsigned long). This triggers a format
warning on these few platforms as the driver uses %ld to print a warning.
So explicitly cast the return value to unsigned long to make the warning
go away (and so fix allmodconfig build on the affected architectures).
Fixes: beed983621 ("ASoC: Intel: avs: Machine board registration")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220529141250.1979827-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Define handlers specific to cAVS 1.5+ platforms, that is, APL and
similar platforms. These differ from SKL-alike ones in terms of AudioDSP
firmware generation and thus the '+' suffix. Introduciton of IMR,
removal of CLDMA, D0IX support and monolithic-ation of library/module
code are most impactful but are not the only changes brought with this
newer generation. Some generic and 1.5 operations are being re-used to
reduce code size.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-16-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define handlers specific to cAVS 1.5 platforms, that is SKL, KBL, AML
and all other variants based on this very version of AudioDSP
architecture. Most are specific to SKL-alike platforms with only
skl_log_buffer_offset() being exposed and used later by younger
equivalents.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To preserve power during sleep operations, handle suspend (S3),
hibernation (S4) and runtime (RTD3) transitions. As flow for all of
is shared, define common handlers to reduce code size.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HD-Audio bus is a PCI device. Add all functions necessary to probe such
device along with its removal sequence. Behaviour implemented for all
standard operations is similar to existing solutions: sound/pci/hda and
sound/soc/intel/skylake.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AVS driver operates with granular audio card division in mind.
Super-card approach (e.g.: I2S, DMIC and HDA DAIs combined) is
deprecated in favour of individual cards - one per each device. This
provides necessary dynamism, especially for configurations with number
of codecs present and makes it easier to survive auxiliary devices
failures - one card failing to probe does not prevent others from
succeeding.
All boards spawned by AVS are unregistered on ->remove(). This includes
dummy codecs such as DMIC.
As all machine boards found in sound/soc/intel/boards are irreversibly
tied to 'super-card' approach, new boards are going to be introduced.
This temporarily increases number of boards available under /intel
directory until skylake-driver becomes deprecated and removed.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'link_mask' field is intended for SoundWire, I2S should use
'i2s_link_mask' instead.
Signed-off-by: Piotr Maziarz <piotrx.maziarz@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define tracing macros for easy avs debug. These cover all IPC message
types: requests, replies and notifications as well as DSP-core
operations and d0ix toggling.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio DSP device supports D0 substates in form of D0ix, allowing for
preserving more power even when device is still considered active (D0).
When entered, certain domains which are not being currently used become
power gated. Entering and leaving D0ix is a complex process and differs
between firmware generations.
Conditions that disallow D0i3 and require immediate D0i0 transition
include but may not be limited to: IPC traffic, firmware tracing and
SRAM I/O. To make D0ix toggling sane, delay D0i3 transition and refresh
the timer each time an IPC is requested.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware provides its own debug functionality. While coredump is one of
these, traces are the main area of interest. kfifo is enlisted to cache
log data that is being pumped to driver through SRAM. Separate DSP
operations are declared as actual feature implementation differs between
firmware generations.
As log gathering involves usage of IPCs, add all necessary: ENABLE_LOGS
and SYSTEM_TIME.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In rare occasions, under stress conditions or hardware malfunction, DSP
firmware may fail. Software is notified about such situation with
EXCEPTION_CAUGHT notification. IPC timeout is also counted as critical
device failure. More often than not, driver can recover from such
situations by performing full reset: killing and restarting ADSP.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HDA streaming in DSP world means enlisting HDAudio links as BE
interfaces. Another difference when compared to its DMIC and I2S friends
is lack of NHLT blob usage - no additional hardware configuration is
needed.
Similarly to I2S component, HDA populates its DAIs dynamically, here by
the means of codec->pcm_list_head. Allows for cutting the number of soc
components required to support the interface.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DMIC and I2S interfaces differ in DMA operations from the HDAudio
interface. With that in mind, implement all DAI operations to handle
non-HDA BE interfaces.
To prevent code duplication in newly added code, I2S platform
registering is dynamic - makes use of specified port_mask and TDMs
array to populate as many DAIs as required.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each stream in AVS is represented by FE and BE domain. FE path stands
for HOST part of the stream while BE stands for LINK (hardware) one.
While BE portion is interface specific, FE is not. Handle all standard
DAI operations to implement FE part of the stream.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Prepare for concrete PCM operations over HDA, DMIC and I2S interfaces by
providing generic soc component implementation. Interface-specific
components re-use this code as majority of flow is shared.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Not all modules are part of base firmware. Some are part of loadable
libraries. These need to be loaded after base firmware reports ready
status through FW_READY notification.
Their loading process is similar to the base firmware's one. Request the
binary file, verify and strip the manifest and load the actual code into
DSP memory with help of CLDMA or HD-Audio render stream, depending on
audio device generation.
List of libraries needed for loading is obtained through the topology -
vendor sections specifying the name of firmware files to request.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220516101116.190192-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each module on DSP side serves a processing purpose. Depending on its
purpose, it needs different information during its initialization. Add
functions responsible for creating instances of specific module types
given the information coming from the topology file.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When binding modules to pins other than pin0, sometimes additional
preparations need to be made, depending on the module type.
Add function that prepares modules when necessary before binding them.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
