The msm driver has dropped support for older eDP block. However the
merge conflict in the commit 4ce2ca4b37 ("drm/msm: Fix include
statements for DisplayPort") was resolved incorrectly and two files were
left in place. Drop them now (again).
Fixes: 4ce2ca4b37 ("drm/msm: Fix include statements for DisplayPort")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/484307/
Link: https://lore.kernel.org/r/20220430175747.3818137-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add explicit include of drm_bridge.h to the msm_drv.c to fix the
following warning:
drivers/gpu/drm/msm/msm_drv.c:236:17: error: implicit declaration of function 'drm_bridge_remove'; did you mean 'drm_bridge_detach'? [-Werror=implicit-function-declaration]
Fixes: d28ea55626 ("drm/msm: properly add and remove internal bridges")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/484310/
Link: https://lore.kernel.org/r/20220430180917.3819294-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The downstream uses read-modify-write for updating command mode
compression registers. Let's follow this approach. This also fixes the
following warning:
drivers/gpu/drm/msm/dsi/dsi_host.c:918:23: warning: variable 'reg_ctrl' set but not used [-Wunused-but-set-variable]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 08802f515c ("drm/msm/dsi: Add support for DSC configuration")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/484305/
Link: https://lore.kernel.org/r/20220430175533.3817792-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
While there's a comment pointing from dpu_intr_set to dpu_hw_intr_reg
and vice-versa, an array initializer using indices makes it so that the
indices between the enum and array cannot possibly get out of sync even
if they're accidentially ordered wrongly. It is still useful to keep
the comment to be made aware where the register offset mapping resides
while looking at dpu_hw_intr_reg.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/476358/
Link: https://lore.kernel.org/r/20220226194633.204501-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently, dpu_hw_lm_collect_misr returns EINVAL if CRC is disabled.
This causes a lot of spam in the DRM debug logs as it's called for every
vblank.
Instead of returning EINVAL when CRC is disabled in
dpu_hw_lm_collect_misr, let's return ENODATA and add an extra ENODATA check
before the debug log in dpu_crtc_get_crc.
Changes since V1:
- Added reported-by and suggested-by tags
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # RB5 (qrb5165)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/484274/
Link: https://lore.kernel.org/r/20220430005210.339-1-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Set mdp clock to max clock rate during probe/bind sequence from the
opp table so that rails are not at undetermined state. Since we do not
know what will be the rate set in boot loader, it would be ideal to
vote at max frequency. There could be a firmware display programmed
in bootloader and we want to transition it to kernel without underflowing.
The clock will be scaled down later when framework sends an update.
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/479090/
Link: https://lore.kernel.org/r/1647919631-14447-2-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Remove the unused local variable refcount for encoder_phys_wb
as the one part of wb_enc is used directly.
changes in v2:
- remove usage of ret variable also
- remove the if (ret) code as it was dead-code anyway
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483919/
Link: https://lore.kernel.org/r/1651169759-29760-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The irq_of_parse_and_map() function returns 0 on failure, and does not
return a negative value anyhow, so never enter this conditional branch.
Fixes: f6a8eaca0e ("drm/msm/mdp5: use irqdomains")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483294/
Link: https://lore.kernel.org/r/20220425091831.3500487-1-lv.ruyi@zte.com.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
As noticed by Dan ([1] an the followup thread) there are multiple issues
with the return values for MSM DSI command transmission callback. In
the error case it can easily return a positive value when it should
have returned a proper error code.
This commits attempts to fix these issues both in TX and in RX paths.
[1]: https://lore.kernel.org/linux-arm-msm/20211001123617.GH2283@kili/
Fixes: a689554ba6 ("drm/msm: Initial add DSI connector support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/480501/
Link: https://lore.kernel.org/r/20220401231104.967193-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
At normal operation, transmit phy test pattern has to be terminated before
DP controller switch to video ready state. However during phy compliance
testing, transmit phy test pattern should not be terminated until end of
compliance test which usually indicated by unplugged interrupt.
Only stop sending the train pattern in dp_ctrl_on_stream() if we're not
doing compliance testing. We also no longer reset 'p_level' and
'v_level' within dp_ctrl_on_link() due to both 'p_level' and 'v_level'
are acquired from link status at previous dpcd read and we like to use
those level to start link training.
Changes in v2:
-- add more details commit text
-- correct Fixes
Changes in v3:
-- drop unnecessary braces
Fixes: 2e0adc765d ("drm/msm/dp: do not end dp link training until video is ready")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483564/
Link: https://lore.kernel.org/r/1650995939-28467-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DP controller state can not switch from video ready state to
transmit phy pattern state at run time. DP mainlink has to be
teared down followed by reset controller to default state to have
DP controller switch to transmit phy test pattern state and start
generate specified phy test pattern to sinker once main link setup
again.
Changes in v2:
-- correct Fixes's commit id
Fixes: 52352fe2f8 ("drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483563/
Link: https://lore.kernel.org/r/1650995939-28467-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The eDP controller does not have a reliable way keep panel
powered on to read the sink capabilities. So, the controller
driver cannot validate if a mode can be supported by the
source. We will rely on the panel driver to populate only
the supported modes for now.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483313/
Link: https://lore.kernel.org/r/1650887072-16652-5-git-send-email-quic_sbillaka@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The source device should ensure the sink is ready before proceeding to
read the sink capability or perform any aux transactions. The sink
will indicate its readiness by asserting the HPD line. The controller
driver needs to wait for the hpd line to be asserted by the sink before
it performs any aux transactions.
The eDP sink is assumed to be always connected. It needs power from the
source and its HPD line will be asserted only after the panel is powered
on. The panel power will be enabled from the panel-edp driver and only
after that, the hpd line will be asserted.
Whereas for DP, the sink can be hotplugged and unplugged anytime. The hpd
line gets asserted to indicate the sink is connected and ready. Hence
there is no need to wait for the hpd line to be asserted for a DP sink.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483312/
Link: https://lore.kernel.org/r/1650887072-16652-4-git-send-email-quic_sbillaka@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The panel-edp enables the eDP panel power during probe, get_modes
and pre-enable. The eDP connect and disconnect interrupts for the eDP/DP
controller are directly dependent on panel power. As eDP display can be
assumed as always connected, the controller driver can skip the eDP
connect and disconnect interrupts. Any disruption in the link status
will be indicated via the IRQ_HPD interrupts.
So, the eDP controller driver can just enable the IRQ_HPD and replug
interrupts. The DP controller driver still needs to enable all the
interrupts.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483310/
Link: https://lore.kernel.org/r/1650887072-16652-3-git-send-email-quic_sbillaka@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This patch adds support for generic eDP sink through aux_bus. The eDP/DP
controller driver should support aux transactions originating from the
panel-edp driver and hence should be initialized and ready.
The panel bridge supporting the panel should be ready before the bridge
connector is initialized. The generic panel probe needs the controller
resources to be enabled to support the aux transactions originating from
the panel probe.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483307/
Link: https://lore.kernel.org/r/1650887072-16652-2-git-send-email-quic_sbillaka@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Two stages are required to setup up main link to be ready to transmit
video stream.
Stage 1: dp_hpd_plug_handle() perform link training to set up main link
stage 2: user space framework (msm_dp_display_enable()) to enable pixel
clock and transfer main link to video ready state.
At current implementation, when dongle unplugged dp_hdp_unplug_handle()
has to wait until stage 2 completed before it can send link down uevent
to user space framework to disable pixel clock followed by tearing down
main link. This introduce unnecessary latency if dongle unplugged happen
after stage 1 and before stage 2. It also has possibility leave main link
stay at ready state after dongle unplugged if framework does not response
to link down uevent notification. This will prevent next dongle plug in
from working. This scenario could possibly happen when dongle unplug while
system in the middle of suspending.
This patch allow unplug handle to tear down main link and notify
framework link down immediately if dongle unplugged happen after
stage 1 and before stage 2. With this approach, dp driver is much
more resilient to any different scenarios. Also redundant both
dp_connect_pending_timeout() and dp_disconnect_pending_timeout()
are removed to reduce logic complexity.
Changes in V2:
-- return -EINVAL at msm_dp_display_enable() if not in correct state
-- replace ST_CONNECT_PENDING with ST_MAINLINK_READY
Fixes: 8ede2ecc3e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483391/
Link: https://lore.kernel.org/r/1650927382-22461-1-git-send-email-quic_khsieh@quicinc.com
[DB: fixed return values due to conversion to function merge]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Current DP driver implementation, event thread is kept running
after DP display is unbind. This patch fix this problem by disabling
DP irq and stop event thread to exit gracefully at dp_display_unbind().
Changes in v2:
-- start event thread at dp_display_bind()
Changes in v3:
-- disable all HDP interrupts at unbind
-- replace dp_hpd_event_setup() with dp_hpd_event_thread_start()
-- replace dp_hpd_event_stop() with dp_hpd_event_thread_stop()
-- move init_waitqueue_head(&dp->event_q) to probe()
-- move spin_lock_init(&dp->event_lock) to probe()
Changes in v4:
-- relocate both dp_display_bind() and dp_display_unbind() to bottom of file
Changes in v5:
-- cancel relocation of both dp_display_bind() and dp_display_unbind()
Changes in v6:
-- move empty event q to dp_event_thread_start()
Changes in v7:
-- call ktheread_stop() directly instead of dp_hpd_event_thread_stop() function
Changes in v8:
-- return error immediately if audio registration failed.
Changes in v9:
-- return error immediately if event thread create failed.
Changes in v10:
-- delete extra DRM_ERROR("failed to create DP event thread\n");
Fixes: 8ede2ecc3e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/482399/
Link: https://lore.kernel.org/r/1650318988-17580-1-git-send-email-quic_khsieh@quicinc.com
[DB: fixed Fixes tag]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since the last commit, the max_pclk_khz became constant, it's set to
DP_MAX_PIXEL_CLK_KHZ and never changed afterwards. Remove it completely
and use DP_MAX_PIXEL_CLK_KHZ directly.
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/480139/
Link: https://lore.kernel.org/r/20220330223008.649274-4-dmitry.baryshkov@linaro.org
[DB: applied a fix to follow connector->bridge conversion]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since dp_panel_get_modes() handling for dp_mode was removed,
dp_display_get_modes also doesn't change the passed dp_mode, drop the
unused dp_mode variable being allocated unused and then freed.
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/480137/
Link: https://lore.kernel.org/r/20220330223008.649274-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since the commit ab20592759 ("drm/msm/dp: remove mode hard-coding in
case of DP CTS") the function dp_panel_get_modes() doesn't use (or fill)
the dp_mode argument. Drop it completely.
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/480138/
Link: https://lore.kernel.org/r/20220330223008.649274-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since DRM_DEBUG_DP is deprecated in favor of drm_dbg_dp(NULL, ...),
this patch replace all DRM_DEBUG_DP with drm_dbg_dp().
Changes in v4:
-- replace (strucr drm_dev *)NULL with drm_dev
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/474870/
Link: https://lore.kernel.org/r/1645122930-23863-4-git-send-email-quic_khsieh@quicinc.com
[DB: fixed compilation of dp_bridge_detect() caused by previous patch]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There is little point in having both connector and root bridge
implementation in the same driver. Move connector's functionality to the
bridge to let next bridge in chain to override it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/473854/
Link: https://lore.kernel.org/r/20220211224006.1797846-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add wb_idx to existing DRM prints in dpu_encoder and also
print the intf_mode so that its clear that for any INTF_CMD/VID
there will be a valid intf_idx and any INTF_WB_* there will be a
valid wb_idx.
Update the debugfs to add the same information. Here is a sample
output with this change:
root:/sys/kernel/debug/dri/0/encoder31# cat status
intf:1 wb:-1 vsync: 31 underrun: 0 mode: INTF_MODE_VIDEO
root:/sys/kernel/debug/dri/0/encoder33# cat status
intf:-1 wb:2 vsync: 7 underrun: 0 mode: INTF_MODE_WB_LINE
Also remove DPU_DEBUG_PHYS macros as its unused because the
respective dpu_encoder_phys_* files have their own macros.
changes in v2:
- use switch case instead of if/else-if for get_intf_type
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483530/
Link: https://lore.kernel.org/r/1650984096-9964-19-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
kms_writeback test cases also verify with a null fb for the
writeback connector job. In addition there are also other
commit paths which can result in kickoffs without a valid
framebuffer like while closing the fb which results in the
callback to drm_atomic_helper_dirtyfb() which internally
triggers a commit.
Add protection in the dpu driver to ensure that commits for
writeback encoders without a valid fb are gracefully skipped.
changes in v2:
- rename dpu_encoder_has_valid_fb to dpu_encoder_is_valid_for_commit
changes in v3:
- none
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483522/
Link: https://lore.kernel.org/r/1650984096-9964-17-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Initialize dpu encoder and connector for writeback if the
target supports it in the catalog.
changes in v2:
- start initialing the encoder for writeback since we
have migrated to using drm_writeback_connector_init_with_encoder()
- instead of checking for WB_2 inside _dpu_kms_initialize_writeback
call it only when its WB_2
- rebase on tip of msm-next and remove usage of priv->encoders
changes in v3:
- none
changes in v4:
- fix copyright years order
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483526/
Link: https://lore.kernel.org/r/1650984096-9964-16-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Introduce the dpu_writeback module which serves as the
interface between dpu operations and the drm_writeback.
This module manages the connector related operations for
dpu writeback.
changes in v2:
- start using drm_writeback_connector_init_with_encoder()
- drop unnecessary arguments from dpu_writeback_init()
- rebase on msm-next tip and remove usage of priv->connectors
changes in v3:
- none
changes in v4:
- none
changes in v5:
- store the drm_enc in the dpu_wb_conn to be used while
using dpu_encoder APIs
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483520/
Link: https://lore.kernel.org/r/1650984096-9964-15-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
_dpu_plane_get_qos_lut() is not specific to just dpu_plane.
It can take any fill level and return the LUT matching it.
This can be used even for other modules like dpu_writeback.
Move _dpu_plane_get_qos_lut() to the common dpu_hw_util file
and rename it to _dpu_hw_get_qos_lut().
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483518/
Link: https://lore.kernel.org/r/1650984096-9964-13-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
add dpu encoder APIs to prepare and cleanup writeback job
for the writeback encoder. These shall be invoked from the
prepare_wb_job/cleanup_wb_job hooks of the drm_writeback
framework.
changes in v3:
- none
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483516/
Link: https://lore.kernel.org/r/1650984096-9964-12-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add an API to reset the encoder related hw blocks to ensure
a proper teardown of the pipeline. At the moment this is being
used only for the writeback encoder but eventually we can start
using this for all interfaces.
changes in v4:
- none
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483512/
Link: https://lore.kernel.org/r/1650984096-9964-10-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add the dpu_hw_wb abstraction to program registers related to the
writeback block. These will be invoked once all the configuration
is set and ready to be programmed to the registers.
changes in v3:
- start using the common struct dpu_hw_cdp_cfg
- leave a comment about DPU non-DPU_WB_QOS_8LVL chipsets
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483505/
Link: https://lore.kernel.org/r/1650984096-9964-7-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Rename dpu_hw_pipe_cdp_cfg to dpu_hw_cdp_cfg and move it
to dpu_hw_utils file so that other modules in addition to
SSPP such as writeback can use it as all the fields can
be used by writeback as well.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483503/
Link: https://lore.kernel.org/r/1650984096-9964-6-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add writeback blocks to the sm8250 DPU hardware catalog. Other
chipsets support writeback too but add it to sm8250 to prototype
the feature so that it can be easily extended to other chipsets.
changes in v4:
- fix the copyright year order
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483510/
Link: https://lore.kernel.org/r/1650984096-9964-4-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The irq_of_parse_and_map() function returns 0 on failure, and does not
return a negative value anyhow, so never enter this conditional branch.
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483291/
Link: https://lore.kernel.org/r/20220425090947.3498897-1-lv.ruyi@zte.com.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
It's typical for the bootloader to bring up the display for showing a
boot splash or efi framebuffer. But in some cases the kernel driver ends
up only partially configuring (in particular) the DPU, which might
result in e.g. that two different data paths attempts to push data to
the interface - with resulting graphical artifacts.
Naturally the end goal would be to inherit the bootloader's
configuration and provide the user with a glitch free handover from the
boot configuration to a running DPU.
But as implementing seamless transition from the bootloader
configuration to the running OS will be a considerable effort, start by
simply resetting the entire MDSS to its power-on state, to avoid the
partial configuration.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482796/
Link: https://lore.kernel.org/r/20220421041550.643964-2-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
- Some DPU versions support inline rot90. It is supported only for
limited amount of UBWC formats.
- There are two versions of inline rotators, v1 (present on sm8250 and
sm7250) and v2 (sc7280). These versions differ in the list of supported
formats and in the scaler possibilities.
Co-developed-by: Kalyan Thota <quic_kalyant@quicinc.com>
Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/481672/
Link: https://lore.kernel.org/r/1649695021-19132-3-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
As per the specification of DPU_CTL_ACTIVE_CFG the configuration of
active blocks should be proactively specified, and the pingpong block is
no different.
The downstream display driver [1] confirms this by also calling
bind_pingpong_blk on CTL_ACTIVE_CFG. Note that this else-if is always
entered, as setup_intf_cfg - unlike this mainline dpu driver that
combines both behind the same function pointer - is left NULL in favour
of using setup_intf_cfg_v1 when CTL_ACTIVE_CFG is set.
This solves continuous timeouts on at least the Qualcomm sm6125 SoC:
[drm:dpu_encoder_frame_done_timeout:2091] [dpu error]enc31 frame done timeout
[drm:_dpu_encoder_phys_cmd_handle_ppdone_timeout.isra.0] *ERROR* id:31 pp:0 kickoff timeout 0 cnt 1 koff_cnt 1
[drm:dpu_encoder_phys_cmd_prepare_for_kickoff] *ERROR* failed wait_for_idle: id:31 ret:-110 pp:0
In the same way this pingpong block should also be unbound followed by
an interface flush when the encoder is disabled, according to the
downstream display driver [2].
[1]: https://source.codeaurora.org/quic/la/platform/vendor/opensource/display-drivers/tree/msm/sde/sde_encoder_phys_cmd.c?h=LA.UM.9.16.r1-08500-MANNAR.0#n167
[2]: https://source.codeaurora.org/quic/la/platform/vendor/opensource/display-drivers/tree/msm/sde/sde_encoder.c?h=LA.UM.9.16.r1-08500-MANNAR.0#n2986
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/475874/
Link: https://lore.kernel.org/r/20220223114011.219044-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To remove possible confusion between (old) INTF_EDP and newer INTF_DP,
stop using INTF_EDP in DPU's code. Until the 8x74/8x84 SoCs are
supported by DPU driver, there is no point in using INTF_EDP.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/475560/
Link: https://lore.kernel.org/r/20220222062246.242577-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DPU driver never supported INTF_EDP, so let's drop the obsolete comment.
If at some point 8x74/8x84's INTF_EDP is ported to DPU driver,
corresponding handling will have to be ported too. Until that time, the
comment serves no purpose.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/475557/
Link: https://lore.kernel.org/r/20220222062246.242577-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This enum value does not correspond to any of actual interface types,
it's not used by the driver, and the value of INTF_WB is greater than
INTF_TYPE_MAX. Thus this symbol serves no purpose and can be removed.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/475556/
Link: https://lore.kernel.org/r/20220222062246.242577-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Based on the discussions on the mailing list, document enum
dpu_intf_type and it's controversial fields: INTF_DP and INTF_EDP.
INTF_EDP is used for older eDP interface found on msm8x74/msm8x84
INTF_DP is used for both eDP and DP interfaces handled by the msm/dp
driver. The DPU driver does not make a difference between them.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/475555/
Link: https://lore.kernel.org/r/20220222062246.242577-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Remove additional indirection: specify IRQ callbacks and IRQ indices
directly rather than through the pointer in the irq structure. For each
IRQ we have a constant IRQ callback. This change simplifies code review
as the reader no longer needs to remember which function is called.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/474700/
Link: https://lore.kernel.org/r/20220217043148.480898-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DPU interrupts code allows multiple callbacks per interrut. In reality
none of the interrupts is shared between blocks (and will probably never
be). Drop support for registering multiple callbacks per interrupt to
simplify interrupt handling code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/474701/
Link: https://lore.kernel.org/r/20220217043148.480898-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Current DP driver implementation has adding safe mode done at
dp_hpd_plug_handle() which is expected to be executed under event
thread context.
However there is possible circular locking happen (see blow stack trace)
after edp driver call dp_hpd_plug_handle() from dp_bridge_enable() which
is executed under drm_thread context.
After review all possibilities methods and as discussed on
https://patchwork.freedesktop.org/patch/483155/, supporting EDID
compliance tests in the driver is quite hacky. As seen with other
vendor drivers, supporting these will be much easier with IGT. Hence
removing all the related fail safe code for it so that no possibility
of circular lock will happen.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
======================================================
WARNING: possible circular locking dependency detected
5.15.35-lockdep #6 Tainted: G W
------------------------------------------------------
frecon/429 is trying to acquire lock:
ffffff808dc3c4e8 (&dev->mode_config.mutex){+.+.}-{3:3}, at:
dp_panel_add_fail_safe_mode+0x4c/0xa0
but task is already holding lock:
ffffff808dc441e0 (&kms->commit_lock[i]){+.+.}-{3:3}, at: lock_crtcs+0xb4/0x124
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&kms->commit_lock[i]){+.+.}-{3:3}:
__mutex_lock_common+0x174/0x1a64
mutex_lock_nested+0x98/0xac
lock_crtcs+0xb4/0x124
msm_atomic_commit_tail+0x330/0x748
commit_tail+0x19c/0x278
drm_atomic_helper_commit+0x1dc/0x1f0
drm_atomic_commit+0xc0/0xd8
drm_atomic_helper_set_config+0xb4/0x134
drm_mode_setcrtc+0x688/0x1248
drm_ioctl_kernel+0x1e4/0x338
drm_ioctl+0x3a4/0x684
__arm64_sys_ioctl+0x118/0x154
invoke_syscall+0x78/0x224
el0_svc_common+0x178/0x200
do_el0_svc+0x94/0x13c
el0_svc+0x5c/0xec
el0t_64_sync_handler+0x78/0x108
el0t_64_sync+0x1a4/0x1a8
-> #2 (crtc_ww_class_mutex){+.+.}-{3:3}:
__mutex_lock_common+0x174/0x1a64
ww_mutex_lock+0xb8/0x278
modeset_lock+0x304/0x4ac
drm_modeset_lock+0x4c/0x7c
drmm_mode_config_init+0x4a8/0xc50
msm_drm_init+0x274/0xac0
msm_drm_bind+0x20/0x2c
try_to_bring_up_master+0x3dc/0x470
__component_add+0x18c/0x3c0
component_add+0x1c/0x28
dp_display_probe+0x954/0xa98
platform_probe+0x124/0x15c
really_probe+0x1b0/0x5f8
__driver_probe_device+0x174/0x20c
driver_probe_device+0x70/0x134
__device_attach_driver+0x130/0x1d0
bus_for_each_drv+0xfc/0x14c
__device_attach+0x1bc/0x2bc
device_initial_probe+0x1c/0x28
bus_probe_device+0x94/0x178
deferred_probe_work_func+0x1a4/0x1f0
process_one_work+0x5d4/0x9dc
worker_thread+0x898/0xccc
kthread+0x2d4/0x3d4
ret_from_fork+0x10/0x20
-> #1 (crtc_ww_class_acquire){+.+.}-{0:0}:
ww_acquire_init+0x1c4/0x2c8
drm_modeset_acquire_init+0x44/0xc8
drm_helper_probe_single_connector_modes+0xb0/0x12dc
drm_mode_getconnector+0x5dc/0xfe8
drm_ioctl_kernel+0x1e4/0x338
drm_ioctl+0x3a4/0x684
__arm64_sys_ioctl+0x118/0x154
invoke_syscall+0x78/0x224
el0_svc_common+0x178/0x200
do_el0_svc+0x94/0x13c
el0_svc+0x5c/0xec
el0t_64_sync_handler+0x78/0x108
el0t_64_sync+0x1a4/0x1a8
-> #0 (&dev->mode_config.mutex){+.+.}-{3:3}:
__lock_acquire+0x2650/0x672c
lock_acquire+0x1b4/0x4ac
__mutex_lock_common+0x174/0x1a64
mutex_lock_nested+0x98/0xac
dp_panel_add_fail_safe_mode+0x4c/0xa0
dp_hpd_plug_handle+0x1f0/0x280
dp_bridge_enable+0x94/0x2b8
drm_atomic_bridge_chain_enable+0x11c/0x168
drm_atomic_helper_commit_modeset_enables+0x500/0x740
msm_atomic_commit_tail+0x3e4/0x748
commit_tail+0x19c/0x278
drm_atomic_helper_commit+0x1dc/0x1f0
drm_atomic_commit+0xc0/0xd8
drm_atomic_helper_set_config+0xb4/0x134
drm_mode_setcrtc+0x688/0x1248
drm_ioctl_kernel+0x1e4/0x338
drm_ioctl+0x3a4/0x684
__arm64_sys_ioctl+0x118/0x154
invoke_syscall+0x78/0x224
el0_svc_common+0x178/0x200
do_el0_svc+0x94/0x13c
el0_svc+0x5c/0xec
el0t_64_sync_handler+0x78/0x108
el0t_64_sync+0x1a4/0x1a8
Changes in v2:
-- re text commit title
-- remove all fail safe mode
Changes in v3:
-- remove dp_panel_add_fail_safe_mode() from dp_panel.h
-- add Fixes
Changes in v5:
-- to=dianders@chromium.org
Changes in v6:
-- fix Fixes commit ID
Fixes: 8b2c181e3d ("drm/msm/dp: add fail safe mode outside of event_mutex context")
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Link: https://lore.kernel.org/r/1651007534-31842-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Smatch reports this issue
msm_ringbuffer.c:43:36: warning: symbol 'msm_sched_ops' was not declared. Should it be static?
msm_sched_ops is only used in msm_ringbuffer.c so change its
storage-class specifier to static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482883/
Link: https://lore.kernel.org/r/20220421131507.1557667-1-trix@redhat.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Remove unused MSM_DISPLAY_CAP_HOT_PLUG and MSM_DISPLAY_CAP_EDID
macros from msm_drv.h.
Even if we need these, there are drm equivalent ones present.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/482260/
Link: https://lore.kernel.org/r/1650049782-8421-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
When DSC is enabled, we need to configure DSI registers accordingly and
configure the respective stream compression registers.
Add support to calculate the register setting based on DSC params and
timing information and configure these registers.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/480934/
Link: https://lore.kernel.org/r/20220406094031.1027376-15-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add a mode valid callback for dsi_mgr for checking mode being valid in
case of DSC. For DSC the height and width needs to be multiple of slice,
so we check that here
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/480930/
Link: https://lore.kernel.org/r/20220406094031.1027376-13-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
For DSC to work we typically need a 2,2,1 configuration. This should
suffice for resolutions up to 4k. For more resolutions like 8k this won't
work.
Also, it is better to use 2 LMs and DSC instances as half width results
in lesser power consumption as compared to single LM, DSC at full width.
The panel has been tested only with 2,2,1 configuration, so for
now we blindly create 2,2,1 topology when DSC is enabled
Co-developed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/480925/
Link: https://lore.kernel.org/r/20220406094031.1027376-11-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DPU supports different topologies for the case when multiple INTFs are
being driven by the single phys_enc. The driver defaults to using 3DMux
in such cases. Don't use it if DSC merge is used instead.
Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/480922/
Link: https://lore.kernel.org/r/20220406094031.1027376-9-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
We need to configure the encoder for DSC configuration and calculate DSC
parameters for the given timing so this patch adds that support by
adding dpu_encoder_prep_dsc() which is invoked when DSC is enabled.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/480920/
Link: https://lore.kernel.org/r/20220406094031.1027376-8-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Later gens of hardware have DSC bits moved to hw_ctl, so configure these
bits so that DSC would work there as well
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/480918/
Link: https://lore.kernel.org/r/20220406094031.1027376-7-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In SDM845, DSC can be enabled by writing to pingpong block registers, so
add support for DSC in hw_pp
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/480914/
Link: https://lore.kernel.org/r/20220406094031.1027376-5-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
When DSC is enabled, we need to get the DSC parameters from the panel
driver, so add a dsc parameter in panel to fetch and pass DSC
configuration for DSI panels to DPU encoder, which will enable and
then configure DSC hardware blocks accordingly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/480910/
Link: https://lore.kernel.org/r/20220406094031.1027376-3-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Widebus feature will transmit two pixel data per pixel clock to interface.
This feature now is required to be enabled to easy migrant to higher
resolution applications in future. However since some legacy chipsets
does not support this feature, this feature is enabled by setting
wide_bus_en flag to true within msm_dp_desc struct.
changes in v2:
-- remove compression related code from timing
-- remove op_info from struct msm_drm_private
-- remove unnecessary wide_bus_en variables
-- pass wide_bus_en into timing configuration by struct msm_dp
Changes in v3:
-- split patch into 3 patches
-- enable widebus feature base on chip hardware revision
Changes in v5:
-- DP_INTF_CONFIG_DATABUS_WIDEN
Changes in v6:
-- static inline bool msm_dp_wide_bus_enable() in msm_drv.h
Changes in v7:
-- add Tested-by
Changes in v9:
-- add wide_bus_en to msm_dp_desc
Changes in v10:
-- add wide_bus_en boolean to dp_catalog struc to avoid passing it as parameter
Changes in v11:
-- add const to dp_catalog_hw_revision()
-- add const to msm_dp_wide_bus_available()
Changes in v12:
-- dp_catalog_hw_revision(const struct dp_catalog *dp_catalog)
-- msm_dp_wide_bus_available(const struct msm_dp *dp_display)
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/476283/
Link: https://lore.kernel.org/r/1645824192-29670-5-git-send-email-quic_khsieh@quicinc.com
[DB: fixed the compilation]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Widebus feature will transmit two pixel data per pixel clock to interface.
Timing engine provides driving force for this purpose. This patch base
on HPG (Hardware Programming Guide) to revise timing engine register
setting to accommodate both widebus and non widebus application. Also
horizontal width parameters need to be reduced by half since two pixel
data are clocked out per pixel clock when widebus feature enabled.
Widebus can be enabled individually at DP. However at DSI, widebus have
to be enabled along with DSC to achieve pixel clock rate be scaled down
with same ratio as compression ratio when 10 bits per source component.
Therefore this patch add no supports of DSI related widebus and compression.
Changes in v2:
-- remove compression related code from timing
-- remove op_info from struct msm_drm_private
-- remove unnecessary wide_bus_en variables
-- pass wide_bus_en into timing configuration by struct msm_dp
Changes in v3:
-- split patch into 3 patches
Changes in v4:
-- rework timing engine to not interfere with dsi/hdmi
-- cover both widebus and compression
Changes in v5:
-- remove supports of DSI widebus and compression
Changes in v7:
-- split this patch into 3 patches
-- add Tested-by
Changes in v8:
-- move new registers writes under DATA_HCTL_EN features check.
Changes in v10:
-- add const inside dpu_encoder_is_widebus_enabled()
-- drop useless parenthesis please
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/476281/
Link: https://lore.kernel.org/r/1645824192-29670-4-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The “DP timing” requires the active region to be defined in the
bottom-right corner of the frame dimensions which is different
with DSI. Therefore both display_h_end and display_v_end need
to be adjusted accordingly. However current implementation has
only display_h_end adjusted.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Fixes: fc3a69ec68 ("drm/msm/dpu: intf timing path for displayport")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/476277/
Link: https://lore.kernel.org/r/1645824192-29670-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Remove manual removal of DRM modesetting objects, it is done anyway by
the drm_mode_config_cleanup() called from msm_drm_uninit(). Other
MSM display drivers (MDP4, MDP5) do not manually destroy objects and
trust generic code to do it's work.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/480943/
Link: https://lore.kernel.org/r/20220406101247.483649-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add calls to drm_bridge_add()/drm_bridge_remove() DRM bridges created by
the driver. This fixes the following warning.
WARNING: CPU: 0 PID: 1 at kernel/locking/mutex.c:579 __mutex_lock+0x840/0x9f4
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc1-00002-g3054695a0d27-dirty #55
Hardware name: Generic DT based system
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0xc8/0x1e8
__warn from warn_slowpath_fmt+0x78/0xa8
warn_slowpath_fmt from __mutex_lock+0x840/0x9f4
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from drm_bridge_hpd_enable+0x2c/0x84
drm_bridge_hpd_enable from msm_hdmi_modeset_init+0xc0/0x21c
msm_hdmi_modeset_init from mdp4_kms_init+0x53c/0x90c
mdp4_kms_init from msm_drm_bind+0x514/0x698
msm_drm_bind from try_to_bring_up_aggregate_device+0x160/0x1bc
try_to_bring_up_aggregate_device from component_master_add_with_match+0xc4/0xf8
component_master_add_with_match from msm_pdev_probe+0x274/0x350
msm_pdev_probe from platform_probe+0x5c/0xbc
platform_probe from really_probe.part.0+0x9c/0x290
really_probe.part.0 from __driver_probe_device+0xa8/0x13c
__driver_probe_device from driver_probe_device+0x34/0x10c
driver_probe_device from __driver_attach+0xbc/0x178
__driver_attach from bus_for_each_dev+0x74/0xc0
bus_for_each_dev from bus_add_driver+0x160/0x1e4
bus_add_driver from driver_register+0x88/0x118
driver_register from do_one_initcall+0x6c/0x334
do_one_initcall from kernel_init_freeable+0x1bc/0x220
kernel_init_freeable from kernel_init+0x18/0x12c
kernel_init from ret_from_fork+0x14/0x2c
Fixes: 3d3f8b1f8b ("drm/bridge: make bridge registration independent of drm flow")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/481778/
Link: https://lore.kernel.org/r/20220411234953.2425280-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The msm_mdss serves several roles at this moment. It provides IRQ domain
used by MDP5 and DPU drivers but it also serves as a component master
for both those usecases. MDP4 (which does not have separate MDSS device)
is the component master on it's own.
Remove this assymmetry and make both MDP5 and DPU component masters too.
This removes a need to care about drm/components from msm_mdss driver,
removes an mdss pointer from struct msm_drm_private and simplifies the
interface between mdp5/dpu and msm_drv.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482512/
Link: https://lore.kernel.org/r/20220419155346.1272627-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
MSM DRM driver already allows one to compile out the DP or DSI support.
Add support for disabling other features like MDP4/MDP5/DPU drivers or
direct HDMI output support.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482508/
Link: https://lore.kernel.org/r/20220419155346.1272627-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Let's make the match's data pointer a (sub-)driver's private data. The
only user currently is the msm_drm_init() function, using this data to
select kms_init callback. Pass this callback through the driver's
private data instead.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482510/
Link: https://lore.kernel.org/r/20220419155346.1272627-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently the msm platform driver is a multiplex handling several cases:
- headless GPU-only driver,
- MDP4 with flat device nodes,
- MDP5/DPU MDSS with all the nodes being children of MDSS node.
This results in not-so-perfect code, checking the hardware version
(MDP4/MDP5/DPU) in several places, checking for mdss even when it can
not exist, etc. Split the code into three handling subdrivers (mdp4,
mdss and headless msm).
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482507/
Link: https://lore.kernel.org/r/20220419155346.1272627-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since now there is just one mdss subdriver, drop all the indirection,
make msm_mdss struct completely opaque (and defined inside msm_mdss.c)
and call mdss functions directly.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482505/
Link: https://lore.kernel.org/r/20220419155346.1272627-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
MDP5 and DPU1 both provide the driver handling the MDSS region, which
handles the irq domain and (incase of DPU1) adds some init for the UBWC
controller. Unify those two pieces of code into a common driver.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482506/
Link: https://lore.kernel.org/r/20220419155346.1272627-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Replace the DP-helper module with a display-helper module. The
support for DisplayPort becomes an internal option that drivers
have to select. Update all related Kconfig and Makefile rules.
Besides the existing code for DisplayPort, the new module will
contain helpers for other video-output standards, such as HDMI.
Drivers will have to select their required video-output helpers.
Linking all display-related code into a single module avoids the
proliferation of small kernel modules.
The module parameters drm_dp_cec_unregister_delay, dp_aux_i2c_speed_khz,
and dp_aux_i2c_transfer_size are moving from the drm_dp_helper namespace
to drm_display_helper.
v2:
* mention module parameters in commit message (Javier)
* distiguish between display module and DP support in Kconfig
* update Makefile rules for DP helpers
* move Kconfig rules into separate file under display/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-4-tzimmermann@suse.de
Rename dp/ to display/ to account for additional display-related
helpers, such as HDMI. Update all related include statements. No
functional changes.
Various drivers, such as i915 and amdgpu, use similar naming scheme
by putting code for video-output standards into a local display/
directory. The new directory's name is aligned with this convention.
v2:
* update commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
simple_ondemand interacts poorly with clamp_to_idle. It only looks at
the load since the last get_dev_status call, while it should really look
at the load over polling_ms. When clamp_to_idle true, it almost always
picks the lowest frequency on active because the gpu is idle between
msm_devfreq_idle/msm_devfreq_active.
This logic could potentially be moved into devfreq core.
Fixes: 7c0ffcd40b ("drm/msm/gpu: Respect PM QoS constraints")
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220416003314.59211-3-olvaffe@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Move tracking and busy time calculation to msm_devfreq_get_dev_status.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220416003314.59211-2-olvaffe@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
It is redundant since commit 7c0ffcd40b ("drm/msm/gpu: Respect PM QoS
constraints") because dev_pm_qos_update_request triggers get_dev_status.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220416003314.59211-1-olvaffe@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The motivation at this point is mainly native userspace mesa driver in a
VM guest. The one remaining synchronous "hotpath" is buffer allocation,
because guest needs to wait to know the bo's iova before it can start
emitting cmdstream/state that references the new bo. By allocating the
iova in the guest userspace, we no longer need to wait for a response
from the host, but can just rely on the allocation request being
processed before the cmdstream submission. Allocation failures (OoM,
etc) would just be treated as context-lost (ie. GL_GUILTY_CONTEXT_RESET)
or subsequent allocations (or readpix, etc) can raise GL_OUT_OF_MEMORY.
v2: Fix inuse check
v3: Change mismatched iova case to -EBUSY
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20220411215849.297838-11-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
With userspace allocated iova (next patch), we can have a race condition
where userspace observes the fence completion and deletes the vma before
retire_submit() gets around to unpinning the vma. To handle this, add a
fenced unpin which drops the refcount but tracks the fence, and update
msm_gem_vma_inuse() to check any previously unsignaled fences.
v2: Fix inuse underflow (duplicate unpin)
v3: Fix msm_job_run() vs submit_cleanup() race condition
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220411215849.297838-10-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Combines duplicate vma lookup in the get_and_pin path.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20220411215849.297838-8-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
There was only a single user, which could just as easily stash the iova
when pinning.
v2: fix prepare->prepare->cleanup->cleanup sequences
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220411215849.297838-7-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Get rid of all the unnecessary conversion between address/size and page
offsets. It just confuses things.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220411215849.297838-6-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Prep for a following patch, where it gets a bit more complicated.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220411215849.297838-5-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The ring seqno counter duplicates the fence-context last_fence counter.
They end up getting incremented in lock-step, on the same scheduler
thread, but the split just makes things less obvious.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220411215849.297838-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
These belong more cleanly in the gem header.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220411215849.297838-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
In the cause of using the GPU via virtgpu, the host side process is
really a sort of proxy, and not terribly interesting from the PoV of
crash/fault logging. Add a way to override these per process so that
we can see the guest process's name.
v2: Handle kmalloc failure, add comment to explain kstrdup returns
NULL if passed NULL [Dan Carpenter]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220317165144.222101-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The 64b value field is already suffient to hold a pointer instead of
immediate, but we also need a length field.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220317165144.222101-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
This reverts commit e2a88eabb0. The commit
in question makes msm_use_mmu() check whether the DRM 'component master'
device is translated by the IOMMU. At this moment it is the 'mdss'
device.
However on platforms using the MDP5 driver (e.g. MSM8916/APQ8016,
MSM8996/APQ8096) it's the mdp5 device, which has the iommus property
(and thus is "translated by the IOMMU"). This results in these devices
being broken with the following lines in the dmesg.
[drm] Initialized msm 1.9.0 20130625 for 1a00000.mdss on minor 0
msm 1a00000.mdss: [drm:adreno_request_fw] loaded qcom/a300_pm4.fw from new location
msm 1a00000.mdss: [drm:adreno_request_fw] loaded qcom/a300_pfp.fw from new location
msm 1a00000.mdss: [drm:get_pages] *ERROR* could not get pages: -28
msm 1a00000.mdss: could not allocate stolen bo
msm 1a00000.mdss: [drm:get_pages] *ERROR* could not get pages: -28
msm 1a00000.mdss: [drm:msm_alloc_stolen_fb] *ERROR* failed to allocate buffer object
msm 1a00000.mdss: [drm:msm_fbdev_create] *ERROR* failed to allocate fb
Getting the mdp5 device pointer from this function is not that easy at
this moment. Thus this patch is reverted till the MDSS rework [1] lands.
It will make the mdp5/dpu1 device component master and the check will be
legit.
[1] https://patchwork.freedesktop.org/series/98525/
Fixes: e2a88eabb0 ("drm/msm: Stop using iommu_present()")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220419130422.1033699-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
When building with CONFIG_PM=y and CONFIG_PM_SLEEP=n (such as ARCH=riscv
allmodconfig), the following warnings/errors occur:
drivers/gpu/drm/msm/adreno/adreno_device.c:679:12: error: 'adreno_system_resume' defined but not used [-Werror=unused-function]
679 | static int adreno_system_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/adreno/adreno_device.c:655:12: error: 'adreno_system_suspend' defined but not used [-Werror=unused-function]
655 | static int adreno_system_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
These functions are only used in SET_SYSTEM_SLEEP_PM_OPS(), which
evaluates to empty when CONFIG_PM_SLEEP is not set, making these
functions unused.
To resolve this, use the SYSTEM_SLEEP_PM_OPS() and RUNTIME_PM_OPS()
macros, which were introduced in commit 1a3c7bb088 ("PM: core: Add new
*_PM_OPS macros, deprecate old ones"). They are designed to avoid these
compiler warnings while still guarding their use on
CONFIG_PM{,_SLEEP}=y.
Fixes: 7e4167c9e0 ("drm/msm/gpu: Park scheduler threads for system suspend")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220411181249.2758344-1-nathan@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
The member 'msm_dsi->connector' isn't assigned until
msm_dsi_manager_connector_init() returns (see msm_dsi_modeset_init() and
how it assigns the return value). Therefore this pointer is going to be
NULL here. Let's use 'connector' which is what was intended.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 6d5e784069 ("drm/msm/dsi: Move dsi panel init into modeset init path")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/478693/
Link: https://lore.kernel.org/r/20220318000731.2823718-1-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check it to
prevent potential wrong memory access.
Besides, since mdp5_plane_reset() is void type, so we should better
set `plane-state` to NULL after releasing it.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/481055/
Link: https://lore.kernel.org/r/tencent_8E2A1C78140EE1784AB2FF4B2088CC0AB908@qq.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The fourth param is size, rather than range_end.
Note that we could increase the address space size if we had a way to
prevent buffers from spanning a 4G split, mostly just to avoid fw bugs
with 64b math.
Fixes: 84c31ee16f ("drm/msm/a6xx: Add support for per-instance pagetables")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220407202836.1211268-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Instead of distingting between shared and exclusive fences specify
the fence usage while adding fences.
Rework all drivers to use this interface instead and deprecate the old one.
v2: some kerneldoc comments suggested by Daniel
v3: fix a missing case in radeon
v4: rebase on nouveau changes, fix lockdep and temporary disable warning
v5: more documentation updates
v6: separate internal dma_resv changes from this patch, avoids to
disable warning temporary, rebase on upstream changes
v7: fix missed case in lima driver, minimize changes to i915_gem_busy_ioctl
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-3-christian.koenig@amd.com
This change adds the dma_resv_usage enum and allows us to specify why a
dma_resv object is queried for its containing fences.
Additional to that a dma_resv_usage_rw() helper function is added to aid
retrieving the fences for a read or write userspace submission.
This is then deployed to the different query functions of the dma_resv
object and all of their users. When the write paratermer was previously
true we now use DMA_RESV_USAGE_WRITE and DMA_RESV_USAGE_READ otherwise.
v2: add KERNEL/OTHER in separate patch
v3: some kerneldoc suggestions by Daniel
v4: some more kerneldoc suggestions by Daniel, fix missing cases lost in
the rebase pointed out by Bas.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-2-christian.koenig@amd.com
While there's a comment pointing from dpu_intr_set to dpu_hw_intr_reg
and vice-versa, an array initializer using indices makes it so that the
indices between the enum and array cannot possibly get out of sync even
if they're accidentially ordered wrongly. It is still useful to keep
the comment to be made aware where the register offset mapping resides
while looking at dpu_hw_intr_reg.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220226194633.204501-1-marijn.suijten@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check it to
prevent potential wrong memory access.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/tencent_B3E19486FF39415098B572B7397C2936C309@qq.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Audit all the users of dma_resv_add_excl_fence() and make sure they
reserve a shared slot also when only trying to add an exclusive fence.
This is the next step towards handling the exclusive fence like a
shared one.
v2: fix missed case in amdgpu
v3: and two more radeon, rename function
v4: add one more case to TTM, fix i915 after rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406075132.3263-2-christian.koenig@amd.com
Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
There will be a merge conflict in drivers/power/supply/ab8500_chargalg.c
with your tree, the merge conflict should be easy (take all the
changes).
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG6PA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylMFwCfSIyAU4oLEgj+/Rfmx4o45cAVIWMAnit3zbdU
wUUCGqKcOnTJEcW6dMPh
=1VVi
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
The mutex wasn't really protecting anything before. Before the previous
patch we could still be racing with the scheduler's kthread, as that is
not necessarily frozen yet. Now that we've parked the sched threads,
the only race is with jobs retiring, and that is harmless, ie.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220310234611.424743-4-robdclark@gmail.com
In the system suspend path, we don't want to be racing with the
scheduler kthreads pushing additional queued up jobs to the hw
queue (ringbuffer). So park them first. While we are at it,
move the wait for active jobs to complete into the new system-
suspend path.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220310234611.424743-3-robdclark@gmail.com
Avoid going down devfreq paths on devices where devfreq is not
initialized.
v2: Change has_devfreq() logic [Dmitry]
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: 6aa89ae1fb ("drm/msm/gpu: Cancel idle/boost work on suspend")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220308184844.1121029-1-robdclark@gmail.com
These casts need to happen before the shift. The only time it would
matter would be if "rev.core" is >= 128. In that case the sign bit
would be extended and we do not want that.
Fixes: afab9d91d8 ("drm/msm/adreno: Expose speedbin to userspace")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Link: https://lore.kernel.org/r/20220307133105.GA17534@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
refcount_t complains about 0->1 transitions, which isn't *quite* what we
wanted. So use dirtyfb==1 to mean that the fb is not connected to any
output that requires dirtyfb flushing, so that we can keep the underflow
and overflow checking.
Fixes: 9e4dde28e9 ("drm/msm: Avoid dirtyfb stalls on video mode displays (v2)")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304202146.845566-1-robdclark@gmail.com
Add a way for userspace to specify the sequence number fence used to
track completion of the submit. As the seqno fence is simply an
incrementing counter which is local to the submitqueue, it is easy for
userspace to know the next value.
This is useful for native userspace drivers in a vm guest, as the guest
to host roundtrip can have high latency. Assigning the fence seqno in
the guest userspace allows the guest to continue without waiting for
response from the host.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220224222321.60653-1-robdclark@gmail.com
Any app controlled perfcntr collection (GL_AMD_performance_monitor, etc)
does not require counters to maintain state across context switches. So
clear them if systemwide profiling is not active.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-5-robdclark@gmail.com
Add a SYSPROF param for system profiling tools like Mesa's pps-producer
(perfetto) to control behavior related to system-wide performance
counter collection. In particular, for profiling, one wants to ensure
that GPU context switches do not effect perfcounter state, and might
want to suppress suspend (which would cause counters to lose state).
v2: Swap the order in msm_file_private_set_sysprof() [sboyd] and
initialize the sysprof_active refcount to one (because the under/
overflow checking in refcount_t doesn't expect a 0->1 transition)
meaning that values greater than 1 means sysprof is active.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-4-robdclark@gmail.com
It was always expected to have a use for this some day, so we left a
placeholder. Now we do. (And I expect another use in the not too
distant future when we start allowing userspace to allocate GPU iova.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-3-robdclark@gmail.com
Update headers from mesa commit:
commit 7e63fa2bb13cf14b765ad06d046789ee1879b5ef
Author: Rob Clark <robclark@freedesktop.org>
AuthorDate: Wed Mar 2 17:11:10 2022 -0800
freedreno/registers: Add a couple regs we need for kernel
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15221>
Signed-off-by: Rob Clark <robdclark@chromium.org>
[for display bits:]
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220304005317.776110-2-robdclark@gmail.com
We're experimenting a bit with the process this time, with Dmitry
collecting display patches and merging them into msm-next with me
handling the gpu/etc side of things. Summary of interesting new bits
and pieces
* dpu + dp support for sc8180x
* dp support for sm8350
* dpu + dsi support for qcm2290
* 10nm dsi phy tuning support
* bridge support for dp encoder
* gpu support for additional 7c3 SKUs
* assorted cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGu=Jdrw6DqYOYPTMks7=zatrsvdR=o6DpjqZ=TQQhFZuw@mail.gmail.com
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
-----BEGIN PGP SIGNATURE-----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=TVQP
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-03-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com
The mdp KMS driver will call drm_plane_create_zpos_property() with an
init value depending on the plane purpose.
Since the initial value wasn't carried over in the state, the driver had
to set it again in mdp5_plane_reset(). However, the helpers have been
adjusted to set it properly at reset, so this is not needed anymore.
Cc: freedreno@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-13-maxime@cerno.tech
Someone on IRC once asked an innocent enough sounding question: Why
with xf86-video-modesetting is es2gears limited at 120fps.
So I broke out the perfetto tracing mesa MR and took a look. It turns
out the problem was drm_atomic_helper_dirtyfb(), which would end up
waiting for vblank.. es2gears would rapidly push two frames to Xorg,
which would blit them to screen and in idle hook (I assume) call the
DIRTYFB ioctl. Which in turn would do an atomic update to flush the
dirty rects, which would stall until the next vblank. And then the
whole process would repeat.
But this is a bit silly, we only need dirtyfb for command mode DSI
panels. So track in plane state whether dirtyfb is required, and
track in the fb how many attached planes require dirtyfb so that we
can skip it when not required. (Note, mdp4 does not actually have
cmd mode support.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220223191118.881321-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
-----BEGIN PGP SIGNATURE-----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=HuwD
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
The commit adding msm8998 support didn't added msm8998's DSPP blocks
configuration, but did not use them in msm8998_cfg_init(). Wire them up
to be used for display post processing.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 94391a14fc ("drm/msm/dpu1: Add MSM8998 to hw catalog")
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Cc: Jami Kettunen <jami.kettunen@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/475544/
Link: https://lore.kernel.org/r/20220222031948.228727-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add device pointer so scheduler's printing can use
DRM_DEV_ERROR() instead, which makes life easier under multiple GPU
scenario.
v2: amend all calls of drm_sched_init()
v3: fill dev pointer for all drm_sched_init() calls
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095705.5290-1-Jiawei.Gu@amd.com
QCM2290 MDSS includes a Qualcomm DSI controller v2.4.1. Since this
controller version is not SoC specific, and already assigned to sc7180
for auto configuration, we rely on DSI block specific compatible
string "qcom,dsi-ctrl-6g-qcm2290", and use the device's data to point
to the right dsi config handler.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/474088/
Link: https://lore.kernel.org/r/1644853060-12222-2-git-send-email-loic.poulain@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Config autodetect based on DSI controller version is quite limited
since several qcom SoCs can integrate a DSI controller with the same
version, but with different config (io_offset, supplies, etc).
This change allows to specify dsi config via device data pointer.
config autodetect is still used in case data pointer is NULL.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/474089/
Link: https://lore.kernel.org/r/1644853060-12222-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Other processes don't need to know about faults that they are isolated
from by virtue of address space isolation. They are only interested in
whether some of their state might have been corrupted.
But to be safe, also track unattributed faults. This case should really
never happen unless there is a kernel bug (and that would never happen,
right?)
v2: Instead of adding a new param, just change the behavior of the
existing param to match what userspace actually wants [anholt]
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5934
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220201161618.778455-3-robdclark@gmail.com
Reviewed-by: Emma Anholt <emma@anholt.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
It is possible to supply display-connector (bridge) to the DP interface,
add support for parsing it too.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220211224006.1797846-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently DP driver will allocate panel bridge for eDP panels. This
supports only the following topology:
- eDP encoder ⇒ eDP panel (wrapped using panel-bridge)
Simplify this code to just check if there is any next bridge in the
chain (be it a panel bridge or regular bridge). Rename panel_bridge
field to next_bridge accordingly.
This allows one to use e.g. one of the following display topologies:
- eDP encoder ⇒ ptn3460 ⇒ fixed LVDS panel
- eDP encoder ⇒ ptn3460 ⇒ LVDS connector with EDID lines for panel autodetect
- eDP encoder ⇒ ptn3460 ⇒ THC63LVD1024 ⇒ DPI panel.
- eDP encoder ⇒ LT8912 ⇒ DSI panel
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220211224006.1797846-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In commit 8a3b4c17f8 ("drm/msm/dp: employ bridge mechanism for display
enable and disable") the DP driver received a drm_bridge instance, which
is always attached to the encoder as a root bridge. However it conflicts
with the panel_bridge support for eDP panels. The panel bridge attaches
to the encoder before the "dp" bridge (DP driver's drm_bridge instance
created in msm_dp_bridge_init()) has a chance to do so. Change
panel bridge attachment to come after the "dp" bridge attachment (and to
use it as a previous bridge).
Fixes: 8a3b4c17f8 ("drm/msm/dp: employ bridge mechanism for display enable and disable")
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220211224006.1797846-2-dmitry.baryshkov@linaro.org
[db: fixed commit message according to Stephen's suggestions]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In function dpu_encoder_phys_cmd_wait_for_commit_done we are always
checking if the relative CTL is started by waiting for an interrupt
to fire: it is fine to do that, but then sometimes we call this
function while the CTL is up and has never been put down, but that
interrupt gets raised only when the CTL gets a state change from
0 to 1 (disabled to enabled), so we're going to wait for something
that will never happen on its own.
Solving this while avoiding to restart the CTL is actually possible
and can be done by just checking if it is already up and running
when the wait_for_commit_done function is called: in this case, so,
if the CTL was already running, we can say that the commit is done
if the command transmission is complete (in other terms, if the
interface has been flushed).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210911163919.47173-2-angelogioacchino.delregno@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add a function that returns whether the requested CTL is active or not:
this will be used in a later commit to fix command mode panel issues.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210911163919.47173-1-angelogioacchino.delregno@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DPU driver contains code to parse clock items from device tree into
special data struct and then enable/disable/set rate for the clocks
using that data struct. However the DPU driver itself uses only parsing
and enabling/disabling part (the rate setting is used by DP driver).
Move this implementation to the DP driver (which actually uses rate
setting) and replace hand-coded enable/disable/get loops in the DPU
with the respective clk_bulk operations. Put operation is removed
completely because, it is handled using devres instead.
DP implementation is unchanged for now.
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # RB3 (sdm845) and RB5 (qrb5165)
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220217055529.499829-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
All physical encoders used by virtual encoder share the same connector,
so pull the connector field from dpu_encoder_phys into dpu_encoder_virt
structure. Otherwise code suggests that different phys_encs
can have different connectors.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220217035358.465904-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Make dpu_encoder use atomic_mode_set to receive connector and CRTC
states as arguments rather than finding connector and CRTC by manually
looping through the respective lists.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220217035358.465904-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Both cmd and vid backends provide useless mode_fixup() callback. Drop
it.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220217035358.465904-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
We do not use MSM bus client, so drop bus_scaling_client field from
dpu_encoder_virt.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220217035358.465904-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The msm_display_info structure is not used by the rest of msm driver, so
move it into the dpu1 (dpu_encoder.h to be precise).
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220217035358.465904-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DP audio enablement code which is comparing intf_type,
DRM_MODE_ENCODER_TMDS (= 2) with DRM_MODE_CONNECTOR_DisplayPort (= 10).
Which would never succeed. Fix it to check for DRM_MODE_ENCODER_TMDS.
Fixes: d13e36d7d2 ("drm/msm/dp: add audio support for Display Port on MSM")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220217035358.465904-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The access macros BLK_foo are not used by the code, drop them.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220215145306.3470924-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
dpu_kms_debugfs_init() is invoked for each minor being registered. Most
of the files created are unrelated to the minor, so there's no reason to
present them per minor.
The exception to this is the DisplayPort code, which ends up invoking
dp_debug_get() for each minor, each time associate the allocated object
with dp->debug.
As such dp_debug will create debugfs files in both the PRIMARY and the
RENDER minor's debugfs directory, but only the last reference will be
remembered.
The only use of this reference today is in the cleanup path in
dp_display_deinit_sub_modules() and the dp_debug_private object does
outlive the debugfs entries in either case, so there doesn't seem to be
any adverse effects of this, but per the code the current behavior is
unexpected, so change it to only create debugfs files for the PRIMARY
minor.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[DB: slightly change description and in-patch comment]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220212003811.1818774-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add SC8180x to the hardware catalog, for initial support for the
platform. Due to limitations in the DP driver only one of the four DP
interfaces is left enabled.
The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
is flagged appropriately to ensure widebus is disabled - for now.
Signed-off-by: Rob Clark <robdclark@chromium.org>
[bjorn: Reworked intf and irq definitions]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
SC8180x has the eDP controller wired up to INTF_5, so add the interrupt
register block for this interface to the list.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220215043353.1256754-1-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Using IS_ERR_OR_NULL() together with PTR_ERR() is a typical mistake. If
the value is NULL, then the function will return 0 instead of a proper
return code. Moreover none of dpu_hw_*_init() functions can return NULL.
So, replace all dpu_rm_init()'s IS_ERR_OR_NULL() calls with IS_ERR().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220121210618.3482550-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Now as dpu_hw_intf is not hanled by dpu_rm_get_assigned_resources, there
is no point in embedding the (empty) struct dpu_hw_blk into dpu_hw_intf
(and using typecasts between dpu_hw_blk and dpu_hw_intf). Drop it and
use dpu_hw_intf directly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220121210618.3482550-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
INTF blocks are not really handled by resource manager, they are
assigned at dpu_encoder_setup_display using dpu_encoder_get_intf().
Then this allocation is passed to RM and then returned to then
dpu_encoder.
So allocate them outside of RM and use them directly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220121210618.3482550-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
No code uses lm_max_width from resource manager, so drop it. Instead of
calculating the lm_max_width, code can use max_mixer_width field from
the hw catalog.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220121210618.3482550-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
intf_audio_select() callback function use to configure
HDMI_DP_CORE_SELECT to decide audio output routes to HDMI or DP
interface. HDMI is obsoleted at newer chipset. To keep supporting
legacy hdmi application, intf_audio_select call back function have
to be populated base on hardware chip capability where legacy
chipsets have has_audio_select flag set to true.
Changes in V2:
-- remove has_audio_select flag
-- add BIT(DPU_MDP_AUDIO_SELECT) into dpu_mdp_cfg
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1644875214-12944-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
dpu_core_irq_callback_handler() function comments seem to have become
stale and emit a warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:147:
warning: Function parameter or member 'dpu_kms' not described in 'dpu_core_irq_callback_handler'
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:147:
warning: Excess function parameter 'arg' description in 'dpu_core_irq_callback_handler'
Fix by updating the documentation
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220210114106.290669-3-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The multi line comment style is wrongly used as kernel-doc comment. This
gives a warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:17:
warning: This comment starts with '/**', but isn't a kernel-doc comment.
Refer Documentation/doc-guide/kernel-doc.rst
Update the style to fix this.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220210114106.290669-2-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
We get warning:
In function ‘dpu_encoder_virt_enable’: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1145:33:
warning: variable ‘priv’ set but not used [-Wunused-but-set-variable]
1145 | struct msm_drm_private *priv;
In function ‘dpu_encoder_virt_disable’: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1182:33:
warning: variable ‘priv’ set but not used [-Wunused-but-set-variable]
1182 | struct msm_drm_private *priv;
Remove these unused but set variables
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220210114106.290669-1-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Bringup functionality for MSM8998 in the DPU, driver which is mostly
the same as SDM845 (just a few variations).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Jami Kettunen <jami.kettunen@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220113145111.29984-3-jami.kettunen@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The enum dpu_clk_ctrl_type misses DPU_CLK_CTRL_DMA{2,3} even though
this driver does actually handle both, if present: add the two in
preparation for adding support for SoCs having them.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Jami Kettunen <jami.kettunen@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220113145111.29984-2-jami.kettunen@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
smp_request_block() in drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c calls
bitmap_weight() to check if any bit of a given bitmap is set. It's
better to use bitmap_empty() in that case because bitmap_empty() stops
traversing the bitmap as soon as it finds first set bit, while
bitmap_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220210224933.379149-9-yury.norov@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts
which need to keep the irq line disabled until the threaded handler has
been run.". When applied to an interrupt that doesn't request a threaded
irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect,
which it to disable the forced threading of irqs. For "normal" kernels
if there is no thread_fn then IRQF_ONESHOT is a nop.
In this case disabling forced threading is not appropriate because the
driver calls wake_up_all() (via msm_hdmi_i2c_irq) and also directly uses
the regular spinlock API for locking (in msm_hdmi_hdcp_irq() ). Neither
of these APIs can be called from no-thread interrupt handlers on
PREEMPT_RT systems.
Fix this by removing IRQF_ONESHOT.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220201174734.196718-3-daniel.thompson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The dsi_7nm_phy_enable() disagrees with downstream for
glbl_str_swi_cal_sel_ctrl and glbl_hstx_str_ctrl_0 values. Update
programmed settings to match downstream driver. To remove the
possibility for such errors in future drop less_than_1500_mhz
assignment and specify settings explicitly.
Fixes: 5ac178381d ("drm/msm/dsi: support CPHY mode for 7nm pll/phy")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220217000837.435340-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The DSI subsystem does not fully fall into the pre-enable/enable system
of callbacks, since typically DSI device bridge drivers expect to be
able to communicate with DSI devices at the pre-enable() callback. The
reason is that for some DSI hosts enabling the video stream would
prevent other drivers from sending DSI commands. For example see the
panel-bridge driver, which does drm_panel_prepare() from the
pre_enable() callback (which would be called before our pre_enable()
callback, resulting in panel preparation failures as the link is not yet
ready).
Therewere several attempts to solve this issue, but currently the best
approach is to power up the DSI link from the mode_set() callback,
allowing next bridge/panel to use DSI transfers in the pre_enable()
time. Follow this approach.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211207222901.988484-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts
which need to keep the irq line disabled until the threaded handler has
been run.". When applied to an interrupt that doesn't request a threaded
irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect,
which it to disable the forced threading of irqs (and for "normal" kernels
it is a nop). In this case I can find no evidence that suppressing forced
threading is intentional. Had it been intentional then a driver must adopt
the raw_spinlock API in order to avoid deadlocks on PREEMPT_RT kernels
(and avoid calling any kernel API that uses regular spinlocks).
Fix this by removing the spurious additional flag.
This change is required for my Snapdragon 7cx Gen2 tablet to boot-to-GUI
with PREEMPT_RT enabled.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220201174734.196718-2-daniel.thompson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The clock and data lanes of the DSI PHY have a calibration circuitry
feature. As per the MSM DSI PHY tuning guidelines, the drive strength
tuning can be done by adjusting rescode offset for hstop/hsbot, and
the drive level tuning can be done by adjusting the LDO output level
for the HSTX drive.
Signed-off-by: Rajeev Nandan <quic_rajeevny@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1643573719-32095-4-git-send-email-quic_rajeevny@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add support for MSM DSI PHY tuning configuration. Current design is
to support drive strength and drive level/amplitude tuning for
10nm PHY version, but this can be extended to other PHY versions.
Signed-off-by: Rajeev Nandan <quic_rajeevny@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1643573719-32095-3-git-send-email-quic_rajeevny@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
All DSI PHY/PLL drivers were referencing their VCO parent clock by a
global name, most of which don't exist or have been renamed. These
clock drivers seem to function fine without that except the 14nm driver
for sdm6xx [1].
At the same time all DTs provide a "ref" clock as per the requirements
of dsi-phy-common.yaml, but the clock is never used. This patchset puts
that clock to use without relying on a global clock name, so that all
dependencies are explicitly defined in DT (the firmware) in the end.
Note that this patch intentionally breaks older firmware (DT) that
relies on the clock to be found globally instead. The only affected
platform is msm8974 [2] for whose dsi_phy_28nm a .name="xo" fallback is
left in place to accommodate a more graceful transition period. All
other platforms had the "ref" clock added to their phy node since its
inception, or in a followup patch some time after. These patches
wrongly assumed that the "ref" clock was actively used and have hence
been listed as "Fixes:" below.
Furthermore apq8064 was providing the wrong 19.2MHz cxo instead of
27MHz pxo clock, which has been addressed in [3].
It is expected that both [2] and [3] are applied to the tree well in
advance of this patch such that any actual breakage is extremely
unlikely, but might still occur if kernel upgrades are performed without
the DT to match. After some time the fallback for msm8974 can be
removed again as well.
[1]: https://lore.kernel.org/linux-arm-msm/386db1a6-a1cd-3c7d-a88e-dc83f8a1be96@somainline.org/
[2]: https://lore.kernel.org/linux-arm-msm/20210830175739.143401-1-marijn.suijten@somainline.org/
[3]: https://lore.kernel.org/linux-arm-msm/20210829203027.276143-2-marijn.suijten@somainline.org/
Fixes: 79e51645a1 ("arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY")
Fixes: 6969d1d9c6 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY")
Fixes: 0c0e72705a ("arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210911131922.387964-2-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DP phy should be initialized and exited symmetrically to avoid
clock being stucked at either on or off error. Add debug info
to cover all DP phy to identify clock issues easily.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1643828199-8564-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
