The reg_fields array fed to {devm_}regmap_field_bulk_alloc is currently
not const, which is not correct on semantics (the functions shouldn't
change reg_field contents) and prevents pre-defined const reg_field
array to be used.
As the implementation of this function doesn't change the content of it,
just add const to its prototype.
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
Link: https://lore.kernel.org/r/20210802063741.76301-1-icenowy@sipeed.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A const qualifier was omitted in the declaration of the regmap_bus
pointer, resulting in the following errors:
drivers/base/regmap/regmap-mdio.c: In function ‘__regmap_init_mdio’:
drivers/base/regmap/regmap-mdio.c:87:7: warning: assignment discards
‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
87 | bus = ®map_mdio_c22_bus;
| ^
drivers/base/regmap/regmap-mdio.c:89:7: warning: assignment discards
‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
89 | bus = ®map_mdio_c45_bus;
| ^
Fix this by ensuring the pointer has the same qualifiers as the assigned
values.
Fixes: f083be9db0 ("regmap: mdio: Add clause-45 support")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://lore.kernel.org/r/f304ca638ffdc66d4803a6df1f75436894bd1d5f.1623244066.git.sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Modern ethernet phys support the so-called clause-45 register access
mode, which allows for register address widths of 16 bit.
Also allow for 16-bit register address widths, and return a regmap for
clause-45 access in that case.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://lore.kernel.org/r/9cc263e3e7d5865edd90453b4183f1cf363cb636.1622743333.git.sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently a regmap configuration for regmap-mdio must have a register
address width of 5 bits (cf. clause-22 register access). This is not
enforced on the provided register addresses, which would enable
clause-45 MDIO bus access, if the right bit packing is used.
Prevent clause-45 access, and other invalid addresses, by masking the
provided register address.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://lore.kernel.org/r/f7013f67e6d6ff56ec98660f18320f6ffcc1a777.1622743333.git.sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Some interrupt controllers have inverted status register:
cleared bits is active interrupts and set bits is inactive interrupts,
so add inverted status support to the framework.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20210525034204.5272-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for 7 bits register, 17 bits value type register
formating. This is used, for example, by the Analog Devices
ADMV1013/ADMV1014.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Andrei Drimbarean <andrei.drimbarean@analog.com>
Message-Id: <20210526085223.14896-1-antoniu.miclaus@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap_mdio_read() breaks the principle of "no touch output till it's known
that the operation succeeds". Refactor it accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210520120518.30490-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RTL8231 GPIO and LED expander can be configured for use as an MDIO or SMI
bus device. Currently only the MDIO mode is supported, although SMI mode
support should be fairly straightforward, once an SMI bus driver is available.
Provided features by the RTL8231:
- Up to 37 GPIOs
- Configurable drive strength: 8mA or 4mA (currently unsupported)
- Input debouncing on high GPIOs (currently unsupported)
- Up to 88 LEDs in multiple scan matrix groups
- On, off, or one of six toggling intervals
- "single-color mode": 2×36 single color LEDs + 8 bi-color LEDs
- "bi-color mode": (12 + 2×6) bi-color LEDs + 24 single color LEDs
- Up to one PWM output (currently unsupported)
- Fixed duty cycle, 8 selectable frequencies (1.2kHz - 4.8kHz)
Register access is provided through a new MDIO regmap provider. The GPIO
controller uses gpio-regmap, although a patch is required to support a
limitation of the chip.
There remain some log warnings when probing the device, possibly due to the way
I'm using the MFD subsystem. Would it be possible to avoid these?
[ 2.602242] rtl8231-pinctrl: Failed to locate of_node [id: -2]
[ 2.609380] rtl8231-pinctrl rtl8231-pinctrl.0.auto: no of_node; not parsing pinctrl DT
When no 'leds' sub-node is specified:
[ 2.922262] rtl8231-leds: Failed to locate of_node [id: -2]
[ 2.967149] rtl8231-leds rtl8231-leds.1.auto: no of_node; not parsing pinctrl DT
[ 2.975673] rtl8231-leds rtl8231-leds.1.auto: scan mode missing or invalid
[ 2.983531] rtl8231-leds: probe of rtl8231-leds.1.auto failed with error -22
Changes since v1:
- Reintroduce MDIO regmap, with fixed Kconfig dependencies
- Add configurable dir/value order for gpio-regmap direction_out call
- Drop allocations for regmap fields that are used only on init
- Move some definitions to MFD header
- Add PM ops to replace driver remove for MFD
- Change pinctrl driver to (modified) gpio-regmap
- Change leds driver to use fwnode
Link: https://lore.kernel.org/lkml/cover.1620735871.git.sander@svanheule.net/
Changes since RFC:
- Dropped MDIO regmap interface. I was unable to resolve the Kconfig
dependency issue, so have reverted to using regmap_config.reg_read/write.
- Added pinctrl support
- Added LED support
- Changed root device to MFD, with pinctrl and leds child devices. Root
device is now an mdio_device driver.
Link: https://lore.kernel.org/linux-gpio/cover.1617914861.git.sander@svanheule.net/
Sander Vanheule (7):
regmap: Add MDIO bus support
gpio: regmap: Add configurable dir/value order
dt-bindings: leds: Binding for RTL8231 scan matrix
dt-bindings: mfd: Binding for RTL8231
mfd: Add RTL8231 core device
pinctrl: Add RTL8231 pin control and GPIO support
leds: Add support for RTL8231 LED scan matrix
.../bindings/leds/realtek,rtl8231-leds.yaml | 159 ++++++++
.../bindings/mfd/realtek,rtl8231.yaml | 202 ++++++++++
drivers/base/regmap/Kconfig | 6 +-
drivers/base/regmap/Makefile | 1 +
drivers/base/regmap/regmap-mdio.c | 57 +++
drivers/gpio/gpio-regmap.c | 20 +-
drivers/leds/Kconfig | 10 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-rtl8231.c | 293 ++++++++++++++
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/rtl8231.c | 153 +++++++
drivers/pinctrl/Kconfig | 11 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-rtl8231.c | 377 ++++++++++++++++++
include/linux/gpio/regmap.h | 3 +
include/linux/mfd/rtl8231.h | 57 +++
include/linux/regmap.h | 36 ++
18 files changed, 1393 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/realtek,rtl8231-leds.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/realtek,rtl8231.yaml
create mode 100644 drivers/base/regmap/regmap-mdio.c
create mode 100644 drivers/leds/leds-rtl8231.c
create mode 100644 drivers/mfd/rtl8231.c
create mode 100644 drivers/pinctrl/pinctrl-rtl8231.c
create mode 100644 include/linux/mfd/rtl8231.h
base-commit: 6efb943b86
--
2.31.1
The clean up of struct d can potentiallly index into a null array
d->virt_buf causing errorenous pointer dereferencing issues on
kfree calls. Fix this by adding a null check on d->virt_buf before
attempting to traverse the array to kfree the objects.
Addresses-Coverity: ("Dereference after null check")
Fixes: 4c50144563 ("regmap-irq: Introduce virtual regs to handle more config regs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210406164002.430221-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable drivers to configure and modify "virtual" registers, which are
non-standard registers that further configure irq type on some devices.
Since they are non-standard, enable drivers to configure them according
to their particular idiosyncrasies by specifying an optional callback
function while registering with the framework.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Link: https://lore.kernel.org/r/07e058cdec2297d15c95c825aa0263064d962d5a.1616613838.git.gurus@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add "virtual" registers support to handle any irq configuration
registers in addition to the ones the framework currently supports
(status, mask, unmask, wake, type and ack). These are non-standard
registers that further configure irq type on some devices, so enable the
framework to add a variable number of them.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Link: https://lore.kernel.org/r/a1787067004b0e11cb960319082764397469215a.1616613838.git.gurus@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm's MFD chips have a top level interrupt status register and
sub-irqs (peripherals). When a bit in the main status register goes
high, it means that the peripheral corresponding to that bit has an
unserviced interrupt. If the bit is not set, this means that the
corresponding peripheral does not.
Commit a2d21848d9 ("regmap: regmap-irq: Add main status register
support") introduced the sub-irq logic that is currently applied only
when reading status registers, but not for any other functions like acking
or masking. Extend the use of sub-irq to all other functions, with two
caveats regarding the specification of offsets:
- Each member of the sub_reg_offsets array should be of length 1
- The specified offsets should be the unequal strides for each sub-irq
device.
In QCOM's case, all the *_base registers are to be configured to the
base addresses of the first sub-irq group, with offsets of each
subsequent group calculated as a difference from these addresses.
Continuing from the example mentioned in the cover letter:
/*
* Address of MISC_INT_MASK = 0x1011
* Address of TEMP_ALARM_INT_MASK = 0x2011
* Address of GPIO01_INT_MASK = 0x3011
*
* Calculate offsets as:
* offset_0 = 0x1011 - 0x1011 = 0 (to access MISC's
* registers)
* offset_1 = 0x2011 - 0x1011 = 0x1000
* offset_2 = 0x3011 - 0x1011 = 0x2000
*/
static unsigned int sub_unit0_offsets[] = {0};
static unsigned int sub_unit1_offsets[] = {0x1000};
static unsigned int sub_unit2_offsets[] = {0x2000};
static struct regmap_irq_sub_irq_map chip_sub_irq_offsets[] = {
REGMAP_IRQ_MAIN_REG_OFFSET(sub_unit0_offsets),
REGMAP_IRQ_MAIN_REG_OFFSET(sub_unit0_offsets),
REGMAP_IRQ_MAIN_REG_OFFSET(sub_unit0_offsets),
};
static struct regmap_irq_chip chip_irq_chip = {
--------8<--------
.not_fixed_stride = true,
.mask_base = MISC_INT_MASK,
.type_base = MISC_INT_TYPE,
.ack_base = MISC_INT_ACK,
.sub_reg_offsets = chip_sub_irq_offsets,
--------8<--------
};
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Link: https://lore.kernel.org/r/526562423eaa58b4075362083f561841f1d6956c.1615423027.git.gurus@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a upstream commit cffa4b2122f5("regmap:debugfs:
Fix a memory leak when calling regmap_attach_dev") that
adds a if condition when create name for debugfs_name.
With below function invoking logical, debugfs_name is
freed in regmap_debugfs_exit(), but it is not created again
because of the if condition introduced by above commit.
regmap_reinit_cache()
regmap_debugfs_exit()
...
regmap_debugfs_init()
So, set debugfs_name to NULL after it is freed.
Fixes: cffa4b2122 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Link: https://lore.kernel.org/r/20210226021737.7690-1-Meng.Li@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is the large set of char/misc/whatever driver subsystem updates for
5.12-rc1. Over time it seems like this tree is collecting more and more
tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86
maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only reported
issue being a merge conflict in include/linux/mod_devicetable.h that you
will hit in your tree due to the dfl_device_id addition from the fpga
subsystem in here. The resolution should be simple.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYDZf9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3xgCcCEN+pCJTum+uAzSNH3YKs/onaDgAnRSVwOUw
tNW6n1JhXLYl9f5JdhvS
=MOHs
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86 maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"
* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...
Some late changes for sdw:
- fix for crash on intel driver
- support for _no_pm IO calls in sdw regmap
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmAmYhAACgkQfBQHDyUj
g0fs5xAAz/seDccbDQrpV99ZcLYyBqP3kH3SKykIzAy4d9UOYKsrL2dwwKmc+y/r
J6cUZ05m0OjcJPEJZayI+tvn1sl3qIuNAAk+0KLZ++jy03LajENloArk13T/xhGq
GiRlgcCiB1pp1qRk7abAvQWfApeq77Mq3dwKG5lZbOrFZTc+lu78poMnpFfMHF9O
cn9h5TrQ1tbqU4gj93DAjI4OOQSq7bxHbz1P38GlYP32ZYZW3WF4Fu0fNk6ZQp52
eraUVO3+2PqbtB8t6PhENCIIJDnO1rgo8Bf//4Fpx3Sa2fECk0TPjOdHH4G7DITI
GV8Ar9uG8tb/EyNfS4/R0lHDAaVGnicry2BDFUy3bv7fqnIp/Py8to3L0w3Kx+RF
flm3QMEFPUkoDj65n0Vf1E7y6hxT8Kh1VX81ssFKzkc7vBgtWjba+dQDn+Ym46H5
Njsp/KovokK5MwMkfh5mrN+kmayEhwwltzdMb5OTw2y9NgChDNxXML8JsHTXtoLL
05lKOgXzVQLcALagjZKmkiVt9KtCgDJW2Kmsp/FBO9hOA/dCA5aMcWiYhRarkl8q
z80DunYtA+RUBm+2P4tpntCCxlWZIvjbtpggmmJ6r5m3eB5m5Ud/lOEauyvADUT6
eT+JsgEZr31Yt4s9K1UBB6OiQatIxKwvB2PZDiBSKWUJpl00H0g=
=eJnY
-----END PGP SIGNATURE-----
Merge tag 'soundwire-2_5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire second update for 5.12-rc1
Some late changes for sdw:
- fix for crash on intel driver
- support for _no_pm IO calls in sdw regmap
* tag 'soundwire-2_5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
"GPL v2" is the same as "GPL". It exists for historic reasons.
See Documentation/process/license-rules.rst
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210122070634.12825-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use no_pm versions for write and read.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210122070634.12825-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
sdw_update_slave_status will be invoked when a codec is attached,
and the codec driver will initialize the codec with regmap functions
while the codec device is pm_runtime suspended.
regmap routines currently rely on regular SoundWire IO functions,
which will call pm_runtime_get_sync()/put_autosuspend.
This causes a deadlock where the resume routine waits for an
initialization complete signal that while the initialization complete
can only be reached when the resume completes.
The only solution if we allow regmap functions to be used in resume
operations as well as during codec initialization is to use _no_pm
routines. The duty of making sure the bus is operational needs to be
handled above the regmap level.
Fixes: 7c22ce6e21 ('regmap: Add SoundWire bus support')
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210122070634.12825-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix the following coccicheck warnings:
./drivers/base/regmap/regcache.c:71:3-18: WARNING: Assignment of
0/1 to bool variable.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Link: https://lore.kernel.org/r/1611215961-33725-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This code will leak "map->debugfs_name" because the if statement is
reversed so it only frees NULL pointers instead of non-NULL. In
fact the if statement is not required and should just be removed
because kfree() accepts NULL pointers.
Fixes: cffa4b2122 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X/RQpfAwRdLg0GqQ@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
After initializing the regmap through
syscon_regmap_lookup_by_compatible, then regmap_attach_dev to the
device, because the debugfs_name has been allocated, there is no
need to redistribute it again
unreferenced object 0xd8399b80 (size 64):
comm "swapper/0", pid 1, jiffies 4294937641 (age 278.590s)
hex dump (first 32 bytes):
64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72
dummy-iomuxc-gpr
40 32 30 65 34 30 30 30 00 7f 52 5b d8 7e 42 69
@20e4000..R[.~Bi
backtrace:
[<ca384d6f>] kasprintf+0x2c/0x54
[<6ad3bbc2>] regmap_debugfs_init+0xdc/0x2fc
[<bc4181da>] __regmap_init+0xc38/0xd88
[<1f7e0609>] of_syscon_register+0x168/0x294
[<735e8766>] device_node_get_regmap+0x6c/0x98
[<d96c8982>] imx6ul_init_machine+0x20/0x88
[<0456565b>] customize_machine+0x1c/0x30
[<d07393d8>] do_one_initcall+0x80/0x3ac
[<7e584867>] kernel_init_freeable+0x170/0x1f0
[<80074741>] kernel_init+0x8/0x120
[<285d6f28>] ret_from_fork+0x14/0x20
[<00000000>] 0x0
Fixes: 9b947a13e7 ("regmap: use debugfs even when no device")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20201229105046.41984-1-xiaolei.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is quite a busy release for regmap with two substantial features
being added:
- Support for register maps Soundwire 1.2 multi-byte operations,
allowing atomic support for registers larger than a single byte.
- Support for relaxed I/O without barriers in MMIO regmaps, allowing
them to be used efficiently on systems where default MMIO operations
include barriers.
There was also an addition and revert of use of the new Soundwire
support for RT715 due to build issues with the driver built in, my tests
only covered building it as a module, the patch wasn't just dropped as
it had already been merged elsewhere.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/XdOYACgkQJNaLcl1U
h9DKWwf7BVgrH1vcgOdZ/8xbVnu2pmNGJzHydfV2XD2fHuEgkuVN1dv756HFCzBj
XpHGa+XRGt1j39KsBqhcBOGuCLiTmjmoxWXq4MnBFVHcXBNRk1z6YFtkeZBkRi0j
ZxZNlrrCCaFp8KmqyqMeIU9DbiQ/ITTH/1VBcffnprYI1J9gK4JQE0iisaMIap90
XwKx4VUwT63yVZQGJPW4t65uMUbPTRqcZQzfj3DGhjmkhNI/EvpPU44K11I+op/6
7J9enekMlbOR5t7606h9gAapW1Qt+YrvTwciT9mzGNsmO8MmyUIRQUYuZAzp5RIT
BH5aIRfTUb6lYuktSKI8STrbOUdi/A==
=194Y
-----END PGP SIGNATURE-----
Merge tag 'regmap-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is quite a busy release for regmap with two substantial features
being added:
- Support for register maps Soundwire 1.2 multi-byte operations,
allowing atomic support for registers larger than a single byte.
- Support for relaxed I/O without barriers in MMIO regmaps, allowing
them to be used efficiently on systems where default MMIO
operations include barriers.
There was also an addition and revert of use of the new Soundwire
support for RT715 due to build issues with the driver built in, my
tests only covered building it as a module, the patch wasn't just
dropped as it had already been merged elsewhere"
* tag 'regmap-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
ASoC: rt715: Fix build
regmap: sdw: add required header files
regmap: Remove duplicate `type` field from regmap `regcache_sync` trace event
regmap: Fix order of regmap write log
regmap: mmio: add config option to allow relaxed MMIO accesses
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
The rare event of not having completely new chip driver code, just new
DT bindings and extensions of existing drivers to accomodate new
variants!
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
Thanks,
tglx
-----BEGIN PGP SIGNATURE-----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=iytv
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Generic interrupt and irqchips subsystem updates. Unusually, there is
not a single completely new irq chip driver, just new DT bindings and
extensions of existing drivers to accomodate new variants!
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM
optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups"
* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
driver core: platform: Add devm_platform_get_irqs_affinity()
ACPI: Drop acpi_dev_irqresource_disabled()
resource: Add irqresource_disabled()
genirq/affinity: Add irq_update_affinity_desc()
irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
platform-msi: Track shared domain allocation
irqchip/ti-sci-intr: Fix freeing of irqs
irqchip/ti-sci-inta: Fix printing of inta id on probe success
drivers/irqchip: Remove EZChip NPS interrupt controller
Revert "genirq: Add fasteoi IPI flow"
irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
irqchip/ocelot: Add support for Jaguar2 platforms
irqchip/ocelot: Add support for Serval platforms
irqchip/ocelot: Add support for Luton platforms
irqchip/ocelot: prepare to support more SoC
...
The MIPI SoundWire Device Class standard will define audio functionality
beyond the scope of the existing SoundWire 1.2 standard, which is limited
to the bus and interface.
The description is inspired by the USB Audio Class, with "functions",
"entities", "control selectors", "audio clusters". The main difference
with the USB Audio class is that the devices are typically on a motherboard
and descriptors stored in platform firmware instead of being retrieved
from the device.
The current set of devices managed in this patchset are conformant with the
SDCA 0.6 specification and require dedicated drivers since the descriptors
and platform firmware specification is not complete at this time. They do
however rely on the hierarchical addressing required by the SDCA standard.
Future devices conformant with SDCA 1.0 should rely on a class driver.
This series adds support for the hierarchical SDCA addressing and extends
regmap. It then provides 3 codecs for RT711-sdca headset codec, RT1316
amplifier and RT715-scda microphone codec.
Note that the release of this code before the formal adoption of the
SDCA 1.0 specification was formally endorsed by the MIPI Board to make
sure there is no delay for Linux-based support of this specification.
Jack Yu (1):
ASoC/SoundWire: rt715-sdca: First version of rt715 sdw sdca codec
driver
Pierre-Louis Bossart (2):
soundwire: SDCA: add helper macro to access controls
regmap/SoundWire: sdw: add support for SoundWire 1.2 MBQ
Shuming Fan (2):
ASoC/SoundWire: rt1316: Add RT1316 SDCA vendor-specific driver
ASoC/SoundWire: rt711-sdca: Add RT711 SDCA vendor-specific driver
drivers/base/regmap/Kconfig | 6 +-
drivers/base/regmap/Makefile | 1 +
drivers/base/regmap/regmap-sdw-mbq.c | 101 ++
include/linux/regmap.h | 35 +
include/linux/soundwire/sdw_registers.h | 32 +
sound/soc/codecs/Kconfig | 20 +
sound/soc/codecs/Makefile | 6 +
sound/soc/codecs/rt1316-sdw.c | 756 ++++++++++++
sound/soc/codecs/rt1316-sdw.h | 115 ++
sound/soc/codecs/rt711-sdca-sdw.c | 424 +++++++
sound/soc/codecs/rt711-sdca-sdw.h | 101 ++
sound/soc/codecs/rt711-sdca.c | 1481 +++++++++++++++++++++++
sound/soc/codecs/rt711-sdca.h | 246 ++++
sound/soc/codecs/rt715-sdca-sdw.c | 278 +++++
sound/soc/codecs/rt715-sdca-sdw.h | 170 +++
sound/soc/codecs/rt715-sdca.c | 936 ++++++++++++++
sound/soc/codecs/rt715-sdca.h | 124 ++
17 files changed, 4831 insertions(+), 1 deletion(-)
create mode 100644 drivers/base/regmap/regmap-sdw-mbq.c
create mode 100644 sound/soc/codecs/rt1316-sdw.c
create mode 100644 sound/soc/codecs/rt1316-sdw.h
create mode 100644 sound/soc/codecs/rt711-sdca-sdw.c
create mode 100644 sound/soc/codecs/rt711-sdca-sdw.h
create mode 100644 sound/soc/codecs/rt711-sdca.c
create mode 100644 sound/soc/codecs/rt711-sdca.h
create mode 100644 sound/soc/codecs/rt715-sdca-sdw.c
create mode 100644 sound/soc/codecs/rt715-sdca-sdw.h
create mode 100644 sound/soc/codecs/rt715-sdca.c
create mode 100644 sound/soc/codecs/rt715-sdca.h
base-commit: 3650b228f8
--
2.17.1
The SoundWire 1.1 specification only allowed for reads and writes of
bytes. The SoundWire 1.2 specification adds a new capability to
transfer "Multi-Byte Quantities" (MBQ) across the bus. The transfers
still happens one-byte-at-a-time, but the update is atomic.
For example when writing a 16-bit volume, the first byte transferred
is only taken into account when the second byte is successfully
transferred.
The mechanism is symmetrical for read and writes:
- On a read, the address of the last byte to be read is modified by
setting the MBQ bit
- On a write, the address of all but the last byte to be written are
modified by setting the MBQ bit. The address for the last byte relies
on the MBQ bit being cleared.
The current definitions for MBQ-based controls in the SDCA draft
standard are limited to 16 bits for volumes, so for now this is the
only supported format. An update will be provided if and when support
for 24-bit and 32-bit values is specified by the SDCA standard.
One possible objection is that this code could have been handled with
regmap-sdw.c. However this is a new spec addition not handled by every
SoundWire 1.1 and non-SDCA device, so there's no reason to load code
that will never be used.
Also in practice it's extremely unlikely that CONFIG_REGMAP would not
be selected with CONFIG_REGMAP_MBQ selected. However there's no
functional dependency between the two modules so they can be selected
separately.
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201103172226.4278-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I have an error saying that `regcache_sync` has 2 fields named `type`
while using libtraceevent.
Erase the `int field` type, which is not assigned. This field is
introduced by mistake and this commit removes it.
Fixes: 5936008901 ("regmap: Add the regcache_sync trace event")
Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com>
Link: https://lore.kernel.org/r/20201124135730.9185-1-pduplessis@efficios.com
Signed-off-by: Mark Brown <broonie@kernel.org>
_regmap_write can trigger a _regmap_select_page, which will call
another _regmap_write that will be executed first, but the log shows
the inverse order
Also, keep consistency with _regmap_read which only logs in case of
success
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201112150217.459844-1-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
irq_domain_create_legacy() takes a fwnode as parameter contrary to
irq_domain_add_legacy() which requires a OF node.
Switch the regmap irq domain creation to use that new function so it is not
longer limited to OF based usage.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201030165919.86234-6-andriy.shevchenko@linux.intel.com
On some platforms (eg armv7 due to the CONFIG_ARM_DMA_MEM_BUFFERABLE)
MMIO R/W operations always add memory barriers which can increase load,
decrease battery life or in general reduce performance unnecessarily
on devices which access a lot of configuration registers and where
ordering does not matter (eg. media accelerators like the Verisilicon /
Hantro video decoders).
Drivers used to call the relaxed MMIO variants directly but since they
are now accessing the MMIO registers via regmaps (to compensate for
different VPU HW reg layouts via regmap fields), there is a need for a
relaxed API / config to preserve existing behaviour.
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Link: https://lore.kernel.org/r/20201014203024.954369-1-adrian.ratiu@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For particular codec HWs have requirement to toggle interrupt clear
register twice 0->1->0. To accommodate it, need to add one more field
(clear_ack) in the regmap_irq struct and update regmap-irq driver to
support it.
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Link: https://lore.kernel.org/r/1601907440-13373-1-git-send-email-lkasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Useful for devices with many fields.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl9yPoATHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0JsoB/9zhtYrqKbof0AKuMfEeO+pPo4dC/9l
O7ENgSXCb9PWy0auVpU62ISXBPadbbrQXXe3hJ1Zof5q17lYqbaLM7Uem3bxIYtc
0HHRIb49R1sP+99T2JB3RDu/ykzHJsfxCkLgMR5MvBgS5e3KKf0SqZgNSVTYT4Y5
oPt81sxW56Z8FLrLn0j1sVDXlro4/uBpDOcHyzgq4GWgQ6ACvnIOH+PQUTTcGBfT
LtIkRMO8mHNKsDCy9Qy12NRsaparIbYb7KKEY9IR+6TN+qJ/g5PJQcPmsU6b0NIl
pb7fv4IRTvPDaEPa1g20U88qkSE5H3PXp88R3y/JbSMuFJwWwS2AGwYd
=L+6w
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl9yPpwTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0PkDB/9ybt51NqJWyU3JaleY7otD2QvCmvl6
2dzpDncfjYZ8GOhvju74BQM9h/m9EHzb5FQ1yLMKEeICXZwxkDgHiqMLYLN1e6wx
ug5U6lvbT1TmeBa7IJYNNSGH2BKeIDM5Hm2zVvMpEJhF2Y9uAE0HqxjGL3CfbUOv
R2o2K3wgax83FfX86wmYNgkkp4Ri1qviD1Jr90zzFZRr0FAjiyrFHXdfdvK/wUx1
5n9wg+aIehQr1a8cKYQaqWd3HZR6pofmOj1cO4n/By+VEYRWaVds8OKUrqimZ2mE
moX9+ooY3eFdmS6kgtA31bgBFjKxfMNaTzTa4B3kikmxSOKMupQejBn9
=G3GG
-----END PGP SIGNATURE-----
Merge tag 'regmap-field-bulk-api' into regmap-5.10
regmap: Add a bulk field API
Useful for devices with many fields.
Usage of regmap_field_alloc becomes much overhead when number of fields
exceed more than 3.
QCOM LPASS driver has extensively converted to use regmap_fields.
Using new bulk api to allocate fields makes it much more cleaner code to read!
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20200925164856.10315-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
While not destroying mutexes doesn't lead to memory leaks, it's still
the correct thing to do for mutex debugging accounting.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200928120614.23172-1-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Many error paths in __regmap_init rely on ret being pre-initialised to
-EINVAL, add an extra initialisation in after the new call to
regmap_set_name.
Fixes: 94cc89eb8f ("regmap: debugfs: Fix handling of name string for debugfs init delays")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200918152212.22200-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Non-incrementing writes can fail if register + length crosses page
border. However for non-incrementing writes we should not check for page
border crossing. Fix this by passing additional flag to _regmap_raw_write
and passing length to _regmap_select_page basing on the flag.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: cdf6b11daa ("regmap: Add regmap_noinc_write API")
Link: https://lore.kernel.org/r/20200917153405.3139200-2-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Non-incrementing reads can fail if register + length crosses page
border. However for non-incrementing reads we should not check for page
border crossing. Fix this by passing additional flag to _regmap_raw_read
and passing length to _regmap_select_page basing on the flag.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 74fe7b551f ("regmap: Add regmap_noinc_read API")
Link: https://lore.kernel.org/r/20200917153405.3139200-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: 94cc89eb8f ("regmap: debugfs: Fix handling of name string for debugfs init delays")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200918112002.15216-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In regmap_debugfs_init the initialisation of the debugfs is delayed
if the root node isn't ready yet. Most callers of regmap_debugfs_init
pass the name from the regmap_config, which is considered temporary
ie. may be unallocated after the regmap_init call returns. This leads
to a potential use after free, where config->name has been freed by
the time it is used in regmap_debugfs_initcall.
This situation can be seen on Zynq, where the architecture init_irq
callback registers a syscon device, using a local variable for the
regmap_config. As init_irq is very early in the platform bring up the
regmap debugfs root isn't ready yet. Although this doesn't crash it
does result in the debugfs entry not having the correct name.
Regmap already sets map->name from config->name on the regmap_init
path and the fact that a separate field is used to pass the name
to regmap_debugfs_init appears to be an artifact of the debugfs
name being added before the map name. As such this patch updates
regmap_debugfs_init to use map->name, which is already duplicated from
the config avoiding the issue.
This does however leave two lose ends, both regmap_attach_dev and
regmap_reinit_cache can be called after a regmap is registered and
would have had the effect of applying a new name to the debugfs
entries. In both of these cases it was chosen to update the map
name. In the case of regmap_attach_dev there are 3 users that
currently use this function to update the name, thus doing so avoids
changes for those users and it seems reasonable that attaching
a device would want to set the name of the map. In the case of
regmap_reinit_cache the primary use-case appears to be devices that
need some register access to identify the device (for example devices
in the same family) and then update the cache to match the exact
hardware. Whilst no users do currently update the name here, given the
use-case it seemed reasonable the name might want to be updated once
the device is better identified.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200917120828.12987-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Devices such as the AD5628 require 32 bits of data divided in 12 bits
for dummy, command and address, and 20 for data and dummy. Eg:
XXXXCCCCAAAADDDDDDDDDDDDDDDDXXXX
Where X is dont care, C is command, A is address and D is data bits.
Which would requierd the following regmap_config:
static const struct regmap_config config_dac = {
.reg_bits = 12,
.val_bits = 20,
.max_register = 0xff,
};
Signed-off-by: Ricardo Ribalda <ribalda@kernel.org>
Link: https://lore.kernel.org/r/20200917114727.1120373-1-ribalda@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Regmap can't sleep if spinlock is used for the locking protection.
This patch fixes regression caused by a previous commit that switched
regmap to use fsleep() and this broke Amlogic S922X platform.
This patch adds new configuration option for regmap users, allowing to
specify whether regmap operations can sleep and assuming that sleep is
allowed if mutex is used for the regmap locking protection.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 2b32d2f7ce ("regmap: Use flexible sleep")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200902141843.6591-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hello!
This series adds support for the Embedded Controller which is found on
Acer Iconia Tab A500 (Android tablet device).
The Embedded Controller is ENE KB930 and it's running firmware customized
for the A500. The firmware interface may be reused by some other sibling
Acer tablets, although none of those tablets are supported in upstream yet.
Please review and apply, thanks in advance!
Changelog:
v2: - Factored out KB930 device-tree binding into a separate file, like it
was suggested by Lubomir Rintel.
- Switched to use regmap API like it was suggested by Lubomir Rintel.
- Added patch "regmap: Use flexible sleep" which allows not to hog
CPU while LED is switching state.
- Corrected MODULE_LICENSE to use "GPL" in all patches.
- Corrected MFD driver Kconfig entry like it was suggested by
Lubomir Rintel, it now depends on I2C.
- Switched to use I2C probe_new() in the MFD driver.
- Renamed the global pm_off variable, like it was suggested by
Lubomir Rintel and Lee Jones.
- Dropped serial number from the battery driver because I realized
that it's not a battery serial, but a device serial.
- Battery driver now uses dev_err_probe(), like it was suggested by
Sebastian Reichel.
- Dropped legacy LED_ON usage from the LED driver and renamed the
LEDs, like it was suggested by Pavel Machek. I also checked whether
LED-name customization via device-tree could be needed by other
potentially compatible devices and it shouldn't be needed, anyways it
won't be difficult to extend the code even if I'm wrong.
Dmitry Osipenko (6):
dt-bindings: mfd: Add ENE KB930 Embedded Controller binding
regmap: Use flexible sleep
mfd: Add driver for Embedded Controller found on Acer Iconia Tab A500
power: supply: Add battery gauge driver for Acer Iconia Tab A500
leds: Add driver for Acer Iconia Tab A500
ARM: tegra: acer-a500: Add Embedded Controller
.../devicetree/bindings/mfd/ene-kb930.yaml | 66 ++++
.../boot/dts/tegra20-acer-a500-picasso.dts | 17 +
drivers/base/regmap/regmap.c | 4 +-
drivers/leds/Kconfig | 7 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-acer-a500.c | 130 ++++++++
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/mfd/acer-ec-a500.c | 203 ++++++++++++
drivers/power/supply/Kconfig | 6 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/acer_a500_battery.c | 297 ++++++++++++++++++
12 files changed, 743 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/ene-kb930.yaml
create mode 100644 drivers/leds/leds-acer-a500.c
create mode 100644 drivers/mfd/acer-ec-a500.c
create mode 100644 drivers/power/supply/acer_a500_battery.c
--
2.27.0
base-commit: f75aef392f
The multi-reg write function uses udelay(), which is a busy-loop based
delaying function that is not suitable for a long delays. Hence let's
replace the udelay() with fsleep(), which is flexible sleep function that
selects best delay function based on the delay-time.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200830185356.5365-3-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch add support for regmap APIs that are intended to be used by
the drivers of some SPI slave chips which integrate the "SPI slave to
Avalon Master Bridge" (spi-avmm) IP.
The spi-avmm IP acts as a bridge to convert encoded streams of bytes
from the host to the chip's internal register read/write on Avalon bus.
The driver implements the register read/write operations for a generic
SPI master to access the sub devices behind spi-avmm bridge.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Reviewed-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/r/1597822497-25107-2-git-send-email-yilun.xu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a regmap has "fast_io" set then its lock function uses a spinlock.
That doesn't work so well with the functions:
* regmap_cache_only_write_file()
* regmap_cache_bypass_write_file()
Both of the above functions have the pattern:
1. Lock the regmap.
2. Call:
debugfs_write_file_bool()
copy_from_user()
__might_fault()
__might_sleep()
Let's reorder things a bit so that we do all of our sleepable
functions before we grab the lock.
Fixes: d3dc5430d6 ("regmap: debugfs: Allow writes to cache state settings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200715164611.1.I35b3533e8a80efde0cec1cc70f71e1e74b2fa0da@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
CONFIG_REGMAP is not selected when no other serial bus is supported.
It's largely academic since CONFIG_I2C is usually selected e.g. by
DRM, but still this can break randconfig so let's be explicit.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200707202628.113142-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the argument to the newer fwnode_handle instead a device tree
node. Fortunately, there are no users for now. So this is an easy
change.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200706175353.16404-2-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
This function is used by dev_get_regmap() to retrieve a regmap for the
specified device. If the device has more than one regmap, the name parameter
can be used to specify one.
The code here uses a pointer comparison to check for equal strings. This
however will probably always fail, as the regmap->name is allocated via
kstrdup_const() from the regmap's config->name.
Fix this by using strcmp() instead.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20200703103315.267996-1-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
A few small fixes, none of which are likely to have any substantial
impact here - the most substantial one is a fix for a long standing
memory leak on devices that use register patching which will only have
an impact if the device is removed and re-added.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7wllsTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0L5pB/sEQIAR3U1OY7Wh/fln5BvAVkjazr60
PGclUzIWSOuNdMQBClibQhIJkTwLA3BjW1o0db3qB7ulZArGT5KqNdY0z0BkUkPz
6/l297XHerHkNmQc16F9NqT6RX8Xori/mke0DuHkurxq+A1iS970Q3a9todz0ZWB
UuMVfE6a3i13QxhahQmp86NNUH3BbWgyDRUuJELdHGyM7Ydit7Tt1kYLua1TTdBQ
t7R00ukv0XSLG4vCIfSjFajVlzQZIM1YEzefY9TUAWaOc/2znj0syUGn1FehdV5J
a01BWk91jNecHq6K8sIKV7N4z4OUKQqkwlyj+KkB0iMf11xezkJnWCZC
=yvq/
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A few small fixes, none of which are likely to have any substantial
impact here - the most substantial one is a fix for a long standing
memory leak on devices that use register patching which will only have
an impact if the device is removed and re-added"
* tag 'regmap-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix memory leak from regmap_register_patch
regmap: fix the kerneldoc for regmap_test_bits()
regmap: fix alignment issue
When a register patch is registered the reg_sequence is copied but the
memory allocated is never freed. Add a kfree in regmap_exit to clean it
up.
Fixes: 22f0d90a34 ("regmap: Support register patch sets")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200617152129.19655-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two spaces between arguments in regmap_fields_update_bits_base()
so remove one.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200615072507.11303-1-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
The kerneldoc comment for regmap_test_bits() says that it returns -1 on
regmap_read() failure. This is not true - it will propagate the error
code returned by regmap_read(). Fix it.
Fixes: aa2ff9dbae ("regmap: provide helpers for simple bit operations")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200607093421.22209-1-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
The assembly and disassembly of data to be sent to or received from
a device invoke functions regmap_format_XX() and regmap_parse_XX()
that extract or insert data items from or into a buffer, using
assignments. In some cases the functions are called with a buffer
pointer with an odd address. On architectures with strict alignment
requirements this can result in a kernel crash. The assignments
have been replaced by functions that take alignment into account.
Signed-off-by: Jens Thoms Toerring <jt@toerring.de>
Link: https://lore.kernel.org/r/20200531095300.GA27570@toerring.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Bartosz Golaszewski <bgolaszewski@baylibre.com>:
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
I noticed that oftentimes I use regmap_update_bits() for simple bit
setting or clearing. In this case the fourth argument is superfluous as
it's always 0 or equal to the mask argument.
This series proposes to add simple bit operations for setting, clearing
and testing specific bits with regmap.
The second patch uses all three in a driver that got recently picked into
the net-next tree.
The patches obviously target different trees so - if you're ok with
the change itself - I propose you pick the first one into your regmap
tree for v5.8 and then I'll resend the second patch to add the first
user for these macros for v5.9.
v1 -> v2:
- convert the new macros to static inline functions
v2 -> v3:
- drop unneeded ternary operator
Bartosz Golaszewski (2):
regmap: provide helpers for simple bit operations
net: ethernet: mtk-star-emac: use regmap bitops
drivers/base/regmap/regmap.c | 22 +++++
drivers/net/ethernet/mediatek/mtk_star_emac.c | 80 ++++++++-----------
include/linux/regmap.h | 36 +++++++++
3 files changed, 93 insertions(+), 45 deletions(-)
base-commit: 8f3d9f3542
--
2.26.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.orghttp://lists.infradead.org/mailman/listinfo/linux-arm-kernel
In many instances regmap_update_bits() is used for simple bit setting
and clearing. In these cases the last argument is redundant and we can
hide it with a static inline function.
This adds three new helpers for simple bit operations: set_bits,
clear_bits and test_bits (the last one defined as a regular function).
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200528154503.26304-2-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows to access data with 16-bit width of registers
via i2c SMBus block functions.
The multi-command sequence of the reading function is not safe
and may read the wrong data from other address if other commands
are sent in-between the SMBus commands in the read function.
Read performance:
32768 bytes (33 kB, 32 KiB) copied, 11.4869 s, 2.9 kB/s
Write performance(with 1-byte page):
32768 bytes (33 kB, 32 KiB) copied, 129.591 s, 0.3 kB/s
The implementation is inspired by below commit
https://patchwork.ozlabs.org/patch/545292/
v2: add more descriptions about the issue that maybe introduced
by this commit
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20200424123358.144850-1-acelan.kao@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Kontron sl28cpld is a board management chip providing gpio, pwm, fan
monitoring and an interrupt controller. For now this controller is used on
the Kontron SMARC-sAL28 board. But because of its flexible nature, it
might also be used on other boards in the future. The individual blocks
(like gpio, pwm, etc) are kept intentionally small. The MFD core driver
then instantiates different (or multiple of the same) blocks. It also
provides the register layout so it might be updated in the future without a
device tree change; and support other boards with a different layout or
functionalities.
See also [1] for more information.
This is my first take of a MFD driver. I don't know whether the subsystem
maintainers should only be CCed on the patches which affect the subsystem
or on all patches for this series. I've chosen the latter so you can get a
more complete picture.
[1] https://lore.kernel.org/linux-devicetree/0e3e8204ab992d75aa07fc36af7e4ab2@walle.cc/
Changes since v1:
- use of_match_table in all drivers, needed for automatic module loading,
when using OF_MFD_CELL()
- add new gpio-regmap.c which adds a generic regmap gpio_chip implemention
- new patch for reqmap_irq, so we can reuse its implementation
- remove almost any code from gpio-sl28cpld.c, instead use gpio-regmap and
regmap-irq
- change the handling of the mfd core vs device tree nodes; add a new
property "of_reg" to the mfd_cell struct which, when set, is matched to
the unit-address of the device tree nodes.
- fix sl28cpld watchdog when it is not initialized by the bootloader.
Explicitly set the operation mode.
- also add support for kontron,assert-wdt-timeout-pin in sl28cpld-wdt.
As suggested by Bartosz Golaszewski:
- define registers as hex
- make gpio enum uppercase
- move parent regmap check before memory allocation
- use device_property_read_bool() instead of the of_ version
- mention the gpio flavors in the bindings documentation
As suggested by Guenter Roeck:
- cleanup #includes and sort them
- use devm_watchdog_register_device()
- use watchdog_stop_on_reboot()
- provide a Documentation/hwmon/sl28cpld.rst
- cleaned up the weird tristate->bool and I2C=y issue. Instead mention
that the MFD driver is bool because of the following intc patch
- removed the SL28CPLD_IRQ typo
As suggested by Rob Herring:
- combine all dt bindings docs into one patch
- change the node name for all gpio flavors to "gpio"
- removed the interrupts-extended rule
- cleaned up the unit-address space, see above
Michael Walle (16):
include/linux/ioport.h: add helper to define REG resource constructs
mfd: mfd-core: Don't overwrite the dma_mask of the child device
mfd: mfd-core: match device tree node against reg property
regmap-irq: make it possible to add irq_chip do a specific device node
dt-bindings: mfd: Add bindings for sl28cpld
mfd: Add support for Kontron sl28cpld management controller
irqchip: add sl28cpld interrupt controller support
watchdog: add support for sl28cpld watchdog
pwm: add support for sl28cpld PWM controller
gpio: add a reusable generic gpio_chip using regmap
gpio: add support for the sl28cpld GPIO controller
hwmon: add support for the sl28cpld hardware monitoring controller
arm64: dts: freescale: sl28: enable sl28cpld
arm64: dts: freescale: sl28: map GPIOs to input events
arm64: dts: freescale: sl28: enable LED support
arm64: dts: freescale: sl28: enable fan support
.../bindings/gpio/kontron,sl28cpld-gpio.yaml | 51 +++
.../hwmon/kontron,sl28cpld-hwmon.yaml | 27 ++
.../bindings/mfd/kontron,sl28cpld.yaml | 162 +++++++++
.../bindings/pwm/kontron,sl28cpld-pwm.yaml | 35 ++
.../watchdog/kontron,sl28cpld-wdt.yaml | 35 ++
Documentation/hwmon/sl28cpld.rst | 36 ++
.../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 14 +
.../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 9 +
.../freescale/fsl-ls1028a-kontron-sl28.dts | 124 +++++++
drivers/base/regmap/regmap-irq.c | 84 ++++-
drivers/gpio/Kconfig | 15 +
drivers/gpio/Makefile | 2 +
drivers/gpio/gpio-regmap.c | 321 ++++++++++++++++++
drivers/gpio/gpio-sl28cpld.c | 187 ++++++++++
drivers/hwmon/Kconfig | 10 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/sl28cpld-hwmon.c | 152 +++++++++
drivers/irqchip/Kconfig | 3 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-sl28cpld.c | 99 ++++++
drivers/mfd/Kconfig | 21 ++
drivers/mfd/Makefile | 2 +
drivers/mfd/mfd-core.c | 31 +-
drivers/mfd/sl28cpld.c | 154 +++++++++
drivers/pwm/Kconfig | 10 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-sl28cpld.c | 204 +++++++++++
drivers/watchdog/Kconfig | 11 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/sl28cpld_wdt.c | 242 +++++++++++++
include/linux/gpio-regmap.h | 88 +++++
include/linux/ioport.h | 5 +
include/linux/mfd/core.h | 26 +-
include/linux/regmap.h | 10 +
34 files changed, 2142 insertions(+), 32 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
create mode 100644 Documentation/hwmon/sl28cpld.rst
create mode 100644 drivers/gpio/gpio-regmap.c
create mode 100644 drivers/gpio/gpio-sl28cpld.c
create mode 100644 drivers/hwmon/sl28cpld-hwmon.c
create mode 100644 drivers/irqchip/irq-sl28cpld.c
create mode 100644 drivers/mfd/sl28cpld.c
create mode 100644 drivers/pwm/pwm-sl28cpld.c
create mode 100644 drivers/watchdog/sl28cpld_wdt.c
create mode 100644 include/linux/gpio-regmap.h
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.orghttp://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Add a new function regmap_add_irq_chip_np() with its corresponding
devm_regmap_add_irq_chip_np() variant. Sometimes one want to register
the IRQ domain on a different device node that the one of the regmap
node. For example when using a MFD where there are different interrupt
controllers and particularly for the generic regmap gpio_chip/irq_chip
driver. In this case it is not desireable to have the IRQ domain on
the parent node.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200402203656.27047-5-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
When executing the following command, we met kernel dump.
dmesg -c > /dev/null; cd /sys;
for i in `ls /sys/kernel/debug/regmap/* -d`; do
echo "Checking regmap in $i";
cat $i/registers;
done && grep -ri "0x02d0" *;
It is because the count value is too big, and kmalloc fails. So add an
upper bound check to allow max size `PAGE_SIZE << (MAX_ORDER - 1)`.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1584064687-12964-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When checking if a register block is writable we must ensure that the
block does not start with or contain a non incrementing register.
Fixes: 8b9f9d4dc5 ("regmap: verify if register is writeable before writing operations")
Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
Link: https://lore.kernel.org/r/20200118205625.14532-1-ben.whitten@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Only two changes for this release, one fix for error handling with
runtime PM and a change from Greg removing error handling from debugfs
API calls now that they implement user visible error reporting.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl1+vGATHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0JMJB/9Nx/DQ8mGc4KTiNjOd2ic0nwPfsYNB
Nr7/5GXmvjPc64tLmDDITZZTNbruMxMfcvJqli+JVre/yVbM8DrGMuPKpV7KJQl1
ZKXCeRfXRtsZ/u3e/Kek0GEDRGgSwp1qTR3e4SoEQYyrf8oWIrVfRn53ptF+xJld
inQh81+uoLHjWLZ+B2JQ/Dx7729z1+cmM3xpttvakDDRBJ7d9kIs2XA6mNfcWx4/
JibNoOdRt+xxU2ALaa2yNEomv/AuFbQARYop2w6ivxefQAYpVAdqwnYJJdAHIZXi
vkBczdLQpLeGXLaDrR6v0nvKvNBKaUH2WU2osFHI8ww9+HWEVr834Xor
=UQDg
-----END PGP SIGNATURE-----
Merge tag 'regmap-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Only two changes for this release, one fix for error handling with
runtime PM and a change from Greg removing error handling from debugfs
API calls now that they implement user visible error reporting"
* tag 'regmap-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Correct error paths in regmap_irq_thread for pm_runtime
regmap: no need to check return value of debugfs_create functions
Some error paths in regmap_irq_thread put the pm_runtime others do not,
there is no reason to leave the pm_runtime enabled in some cases so
update those paths to also put the pm_runtime.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190812092409.21593-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code has a mixed select/depend usage which makes no sense.
config SOUNDWIRE_BUS
tristate
select REGMAP_SOUNDWIRE
config REGMAP_SOUNDWIRE
tristate
depends on SOUNDWIRE_BUS
Let's remove one layer of Kconfig definitions and align with the
solutions used by all other serial links.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190718230215.18675-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
The debugfs core will warn if a file or directory can not be created, so
there's no need to duplicate the warning, nor really do anything else.
Cc: Mark Brown <broonie@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190731132923.GA13829@kroah.com
Signed-off-by: Mark Brown <broonie@kernel.org>
REGMAP_SCCB is selected by ov772x and ov9650 drivers,
but CONFIG_REGMAP may not, so building will fails:
rivers/media/i2c/ov772x.c: In function ov772x_probe:
drivers/media/i2c/ov772x.c:1360:22: error: variable ov772x_regmap_config has initializer but incomplete type
static const struct regmap_config ov772x_regmap_config = {
^~~~~~~~~~~~~
drivers/media/i2c/ov772x.c:1361:4: error: const struct regmap_config has no member named reg_bits
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 5bbf32217b ("media: ov772x: use SCCB regmap")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190704093553.49904-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
On buses like SlimBus and SoundWire which does not support
gather_writes yet in regmap, A bulk write on paged register
would be silently ignored after programming page.
This is because local variable 'ret' value in regmap_raw_write_impl()
gets reset to 0 once page register is written successfully and the
code below checks for 'ret' value to be -ENOTSUPP before linearising
the write buffer to send to bus->write().
Fix this by resetting the 'ret' value to -ENOTSUPP in cases where
gather_writes() is not supported or single register write is
not possible.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add basic support for i3c bus.
This is a simple implementation that only give support
for SDR Read and Write commands.
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There were a few files in the regmap code that did not have SPDX
identifiers on them, so fix that up. At the same time, remove the "free
form" text that specified the license of the file, as that is impossible
for any tool to properly parse.
Also, as Mark loves // comment markers, convert all of the headers to be
the same to make things look consistent :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap provides a couple of ways to validate the register range used.
a) maxim allowed register, b) writable/readable register tables,
c) callback function that can be provided by the driver to validate
a register. regmap framework should verify if registers
are writeable before every write operation. However this doesn't
seems to happen in every situation.
The method `_regmap_raw_write_impl` is only using the `writeable_reg`
callback to verify if register is writeable, ignoring the other two.
This can lead to undefined behaviour since this allows to write to
registers that could be declared un-writeable by using any other
option.
Change `_regmap_raw_write_impl` to use the `regmap_writeable` method
to verify if registers are writable before the write operation.
Signed-off-by: Nandor Han <nandor.han@vaisala.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Checking for value of type default value just after allocating will
always be zero and the type register default values will never be read,
so fix this!
Without this patch setting irq type will be silently ignored.
Patch "regmap: regmap-irq: Remove default irq type setting from core"
did remove the default mask but it forgot to remove the check before
reading the default type register.
Fixes: 84267d1b18 ("regmap: regmap-irq: Remove default irq type setting from core")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Improve the speed of the loop jumping to the next
available register
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
