Following the same naming convention of the previous patch,
rename nested_load_control_from_vmcb12.
In addition, inline copy_vmcb_control_area as it is only called
by this function.
__nested_copy_vmcb_control_to_cache() works with vmcb_control_area
parameters and it will be useful in next patches, when we use
local variables instead of svm cached state.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20211103140527.752797-4-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is useful in the next patch, to keep a saved copy
of vmcb12 registers and pass it around more easily.
Instead of blindly copying everything, we just copy EFER, CR0, CR3, CR4,
DR6 and DR7 which are needed by the VMRUN checks. If more fields will
need to be checked, it will be quite obvious to see that they must be added
in struct vmcb_save_area_cached and in nested_copy_vmcb_save_to_cache().
__nested_copy_vmcb_save_to_cache() takes a vmcb_save_area_cached
parameter, which is useful in order to save the state to a local
variable.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20211103140527.752797-3-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inline nested_vmcb_check_cr3_cr4 as it is not called by anyone else.
Doing so simplifies next patches.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211103140527.752797-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Everywhere we use kvm_for_each_vpcu(), we use an int as the vcpu
index. Unfortunately, we're about to move rework the iterator,
which requires this to be upgrade to an unsigned long.
Let's bite the bullet and repaint all of it in one go.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-7-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, an SEV-ES guest is terminated if the validation of the VMGEXIT
exit code or exit parameters fails.
The VMGEXIT instruction can be issued from userspace, even though
userspace (likely) can't update the GHCB. To prevent userspace from being
able to kill the guest, return an error through the GHCB when validation
fails rather than terminating the guest. For cases where the GHCB can't be
updated (e.g. the GHCB can't be mapped, etc.), just return back to the
guest.
The new error codes are documented in the lasest update to the GHCB
specification.
Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <b57280b5562893e2616257ac9c2d4525a9aeeb42.1638471124.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvzalloc() to allocate KVM's buffer for SEV-ES's GHCB scratch area so
that KVM falls back to __vmalloc() if physically contiguous memory isn't
available. The buffer is purely a KVM software construct, i.e. there's
no need for it to be physically contiguous.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109222350.2266045-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return appropriate error codes if setting up the GHCB scratch area for an
SEV-ES guest fails. In particular, returning -EINVAL instead of -ENOMEM
when allocating the kernel buffer could be confusing as userspace would
likely suspect a guest issue.
Fixes: 8f423a80d2 ("KVM: SVM: Support MMIO for an SEV-ES guest")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109222350.2266045-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_vcpu_apicv_active() returns false if a virtual machine has no in-kernel
local APIC, however kvm_apicv_activated might still be true if there are
no reasons to disable APICv; in fact it is quite likely that there is none
because APICv is inhibited by specific configurations of the local APIC
and those configurations cannot be programmed. This triggers a WARN:
WARN_ON_ONCE(kvm_apicv_activated(vcpu->kvm) != kvm_vcpu_apicv_active(vcpu));
To avoid this, introduce another cause for APICv inhibition, namely the
absence of an in-kernel local APIC. This cause is enabled by default,
and is dropped by either KVM_CREATE_IRQCHIP or the enabling of
KVM_CAP_IRQCHIP_SPLIT.
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Fixes: ee49a89329 ("KVM: x86: Move SVM's APICv sanity check to common x86", 2021-10-22)
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com>
Message-Id: <20211130123746.293379-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we run the following perf command in an AMD Milan guest:
perf stat \
-e cpu/event=0x1d0/ \
-e cpu/event=0x1c7/ \
-e cpu/umask=0x1f,event=0x18e/ \
-e cpu/umask=0x7,event=0x18e/ \
-e cpu/umask=0x18,event=0x18e/ \
./workload
dmesg will report a #GP warning from an unchecked MSR access
error on MSR_F15H_PERF_CTLx.
This is because according to APM (Revision: 4.03) Figure 13-7,
the bits [35:32] of AMD PerfEvtSeln register is a part of the
event select encoding, which extends the EVENT_SELECT field
from 8 bits to 12 bits.
Opportunistically update pmu->reserved_bits for reserved bit 19.
Reported-by: Jim Mattson <jmattson@google.com>
Fixes: ca724305a2 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20211118130320.95997-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
avic_set_running() passes the current CPU to avic_vcpu_load(), albeit
via vcpu->cpu rather than smp_processor_id(). If the thread is migrated
while avic_set_running runs, the call to avic_vcpu_load() can use a stale
value for the processor id. Avoid this by blocking preemption over the
entire execution of avic_set_running().
Reported-by: Sean Christopherson <seanjc@google.com>
Fixes: 8221c13700 ("svm: Manage vcpu load/unload when enable AVIC")
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generally, kvm->lock is not taken for a long time, but
sev_lock_two_vms is different: it takes vCPU locks
inside, so userspace can hold it back just by calling
a vCPU ioctl. Play it safe and use mutex_lock_killable.
Message-Id: <20211123005036.2954379-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Taking the lock is useless since there are no other references,
and there are already accesses (e.g. to sev->enc_context_owner)
that do not take it. So get rid of it.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMs that mirror an encryption context rely on the owner to keep the
ASID allocated. Performing a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM
would cause a dangling ASID:
1. copy context from A to B (gets ref to A)
2. move context from A to L (moves ASID from A to L)
3. close L (releases ASID from L, B still references it)
The right way to do the handoff instead is to create a fresh mirror VM
on the destination first:
1. copy context from A to B (gets ref to A)
[later] 2. close B (releases ref to A)
3. move context from A to L (moves ASID from A to L)
4. copy context from L to M
So, catch the situation by adding a count of how many VMs are
mirroring this one's encryption context.
Fixes: 0b020f5af0 ("KVM: SEV: Add support for SEV-ES intra host migration")
Message-Id: <20211123005036.2954379-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we have a facility to lock two VMs with deadlock
protection, use it for the creation of mirror VMs as well. One of
COPY_ENC_CONTEXT_FROM(dst, src) and COPY_ENC_CONTEXT_FROM(src, dst)
would always fail, so the combination is nonsensical and it is okay to
return -EBUSY if it is attempted.
This sidesteps the question of what happens if a VM is
MOVE_ENC_CONTEXT_FROM'd at the same time as it is
COPY_ENC_CONTEXT_FROM'd: the locking prevents that from
happening.
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-10-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow intra-host migration of a mirror VM; the destination VM will be
a mirror of the same ASID as the source.
Fixes: b56639318b ("KVM: SEV: Add support for SEV intra host migration")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was broken before the introduction of KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM,
but technically harmless because the region list was unused for a mirror
VM. However, it is untidy and it now causes a NULL pointer access when
attempting to move the encryption context of a mirror VM.
Fixes: 54526d1fd5 ("KVM: x86: Support KVM VMs sharing SEV context")
Message-Id: <20211123005036.2954379-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Encapsulate the handling of the migration_in_progress flag for both VMs in
two functions sev_lock_two_vms and sev_unlock_two_vms. It does not matter
if KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM locks the destination struct kvm a bit
later, and this change 1) keeps the cleanup chain of labels smaller 2)
makes it possible for KVM_CAP_VM_COPY_ENC_CONTEXT_FROM to reuse the logic.
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
list_replace_init cannot be used if the source is an empty list,
because "new->next->prev = new" will overwrite "old->next":
new old
prev = new, next = new prev = old, next = old
new->next = old->next prev = new, next = old prev = old, next = old
new->next->prev = new prev = new, next = old prev = old, next = new
new->prev = old->prev prev = old, next = old prev = old, next = old
new->next->prev = new prev = old, next = old prev = new, next = new
The desired outcome instead would be to leave both old and new the same
as they were (two empty circular lists). Use list_cut_before, which
already has the necessary check and is documented to discard the
previous contents of the list that will hold the result.
Fixes: b56639318b ("KVM: SEV: Add support for SEV intra host migration")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The IRTE for an assigned device can trigger a POSTED_INTR_VECTOR even
if APICv is disabled on the vCPU that receives it. In that case, the
interrupt will just cause a vmexit and leave the ON bit set together
with the PIR bit corresponding to the interrupt.
Right now, the interrupt would not be delivered until APICv is re-enabled.
However, fixing this is just a matter of always doing the PIR->IRR
synchronization, even if the vCPU has temporarily disabled APICv.
This is not a problem for performance, or if anything it is an
improvement. First, in the common case where vcpu->arch.apicv_active is
true, one fewer check has to be performed. Second, static_call_cond will
elide the function call if APICv is not present or disabled. Finally,
in the case for AMD hardware we can remove the sync_pir_to_irr callback:
it is only needed for apic_has_interrupt_for_ppr, and that function
already has a fallback for !APICv.
Cc: stable@vger.kernel.org
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Message-Id: <20211123004311.2954158-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fixes for Xen emulation
* Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
* Fixes for migration of 32-bit nested guests on 64-bit hypervisor
* Compilation fixes
* More SEV cleanups
Rename cmd_allowed_from_miror() to is_cmd_allowed_from_mirror(), fixing
a typo and making it obvious that the result is a boolean where
false means "not allowed".
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a fully redundant write to sev->asid during SEV/SEV-ES guest
initialization. The ASID is set a few lines earlier prior to the call to
sev_platform_init(), which doesn't take "sev" as a param, i.e. can't
muck with the ASID barring some truly magical behind-the-scenes code.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if the VM is tagged as SEV-ES but not SEV. KVM relies on SEV and
SEV-ES being set atomically, and guards common flows with "is SEV", i.e.
observing SEV-ES without SEV means KVM has a fatal bug.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set sev_info.active during SEV/SEV-ES activation before calling any code
that can potentially consume sev_info.es_active, e.g. set "active" and
"es_active" as a pair immediately after the initial sanity checks. KVM
generally expects that es_active can be true if and only if active is
true, e.g. sev_asid_new() deliberately avoids sev_es_guest() so that it
doesn't get a false negative. This will allow WARNing in sev_es_guest()
if the VM is tagged as SEV-ES but not SEV.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reject COPY_ENC_CONTEXT_FROM if the destination VM has created vCPUs.
KVM relies on SEV activation to occur before vCPUs are created, e.g. to
set VMCB flags and intercepts correctly.
Fixes: 54526d1fd5 ("KVM: x86: Support KVM VMs sharing SEV context")
Cc: stable@vger.kernel.org
Cc: Peter Gonda <pgonda@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Nathan Tempelman <natet@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Differentiate between IRQ and NMI for KVM's PMC overflow callback, which
was originally invoked in response to an NMI that arrived while the guest
was running, but was inadvertantly changed to fire on IRQs as well when
support for perf without PMU/NMI was added to KVM. In practice, this
should be a nop as the PMC overflow callback shouldn't be reached, but
it's a cheap and easy fix that also better documents the situation.
Note, this also doesn't completely prevent false positives if perf
somehow ends up calling into KVM, e.g. an NMI can arrive in host after
KVM sets its flag.
Fixes: dd60d21706 ("KVM: x86: Fix perf timer mode IP reporting")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20211111020738.2512932-12-seanjc@google.com
Use the same cleanup code independent of whether the cgroup to be
uncharged and unref'd is the source or the destination cgroup. Use a
bool to track whether the destination cgroup has been charged, which also
fixes a bug in the error case: the destination cgroup must be uncharged
only if it does not match the source.
Fixes: b56639318b ("KVM: SEV: Add support for SEV intra host migration")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix misuse of gfn-to-pfn cache when recording guest steal time / preempted status
* Fix selftests on APICv machines
* Fix sparse warnings
* Fix detection of KVM features in CPUID
* Cleanups for bogus writes to MSR_KVM_PV_EOI_EN
* Fixes and cleanups for MSR bitmap handling
* Cleanups for INVPCID
* Make x86 KVM_SOFT_MAX_VCPUS consistent with other architectures
Add support for AMD SEV and SEV-ES intra-host migration support. Intra
host migration provides a low-cost mechanism for userspace VMM upgrades.
In the common case for intra host migration, we can rely on the normal
ioctls for passing data from one VMM to the next. SEV, SEV-ES, and other
confidential compute environments make most of this information opaque, and
render KVM ioctls such as "KVM_GET_REGS" irrelevant. As a result, we need
the ability to pass this opaque metadata from one VMM to the next. The
easiest way to do this is to leave this data in the kernel, and transfer
ownership of the metadata from one KVM VM (or vCPU) to the next. In-kernel
hand off makes it possible to move any data that would be
unsafe/impossible for the kernel to hand directly to userspace, and
cannot be reproduced using data that can be handed to userspace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle #GP on INVPCID due to an invalid type in the common switch
statement instead of relying on the callers (VMX and SVM) to manually
validate the type.
Unlike INVVPID and INVEPT, INVPCID is not explicitly documented to check
the type before reading the operand from memory, so deferring the
type validity check until after that point is architecturally allowed.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109174426.2350547-3-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_GUESTDBG_BLOCKIRQ relies on interrupts being injected using
standard kvm's inject_pending_event, and not via APICv/AVIC.
Since this is a debug feature, just inhibit APICv/AVIC while
KVM_GUESTDBG_BLOCKIRQ is in use on at least one vCPU.
Fixes: 61e5f69ef0 ("KVM: x86: implement KVM_GUESTDBG_BLOCKIRQ")
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211108090245.166408-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These function names sound like predicates, and they have siblings,
*is_valid_msr(), which _are_ predicates. Moreover, there are comments
that essentially warn that these functions behave unexpectedly.
Flip the polarity of the return values, so that they become
predicates, and convert the boolean result to a success/failure code
at the outer call site.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211105202058.1048757-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SEV-ES to work with intra host migration the VMSAs, GHCB metadata,
and other SEV-ES info needs to be preserved along with the guest's
memory.
Signed-off-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20211021174303.385706-4-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SEV to work with intra host migration, contents of the SEV info struct
such as the ASID (used to index the encryption key in the AMD SP) and
the list of memory regions need to be transferred to the target VM.
This change adds a commands for a target VMM to get a source SEV VM's sev
info.
Signed-off-by: Peter Gonda <pgonda@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20211021174303.385706-3-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid code duplication across all callers of misc_cg_try_charge and
misc_cg_uncharge. The resource type for KVM is always derived from
sev->es_active, and the quantity is always 1.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move SEV-ES vCPU metadata into new sev_es_state struct from vcpu_svm.
Signed-off-by: Peter Gonda <pgonda@google.com>
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20211021174303.385706-2-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
* Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
* Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
* More memcg accounting of the memory allocated on behalf of a guest
* Timer and vgic selftests
* Workarounds for the Apple M1 broken vgic implementation
* KConfig cleanups
* New kvmarm.mode=none option, for those who really dislike us
RISC-V:
* New KVM port.
x86:
* New API to control TSC offset from userspace
* TSC scaling for nested hypervisors on SVM
* Switch masterclock protection from raw_spin_lock to seqcount
* Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
* Convey the exit reason to userspace on emulation failure
* Configure time between NX page recovery iterations
* Expose Predictive Store Forwarding Disable CPUID leaf
* Allocate page tracking data structures lazily (if the i915
KVM-GT functionality is not compiled in)
* Cleanups, fixes and optimizations for the shadow MMU code
s390:
* SIGP Fixes
* initial preparations for lazy destroy of secure VMs
* storage key improvements/fixes
* Log the guest CPNC
Starting from this release, KVM-PPC patches will come from
Michael Ellerman's PPC tree.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBOiEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNowwf/axlx3g9sgCwQHr12/6UF/7hL/RwP
9z+pGiUzjl2YQE+RjSvLqyd6zXh+h4dOdOKbZDLSkSTbcral/8U70ojKnQsXM0XM
1LoymxBTJqkgQBLm9LjYreEbzrPV4irk4ygEmuk3CPOHZu8xX1ei6c5LdandtM/n
XVUkXsQY+STkmnGv4P3GcPoDththCr0tBTWrFWtxa0w9hYOxx0ay1AZFlgM4FFX0
QFuRc8VBLoDJpIUjbkhsIRIbrlHc/YDGjuYnAU7lV/CIME8vf2BW6uBwIZJdYcDj
0ejozLjodEnuKXQGnc8sXFioLX2gbMyQJEvwCgRvUu/EU7ncFm1lfs7THQ==
=UxKM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- More progress on the protected VM front, now with the full fixed
feature set as well as the limitation of some hypercalls after
initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
RISC-V:
- New KVM port.
x86:
- New API to control TSC offset from userspace
- TSC scaling for nested hypervisors on SVM
- Switch masterclock protection from raw_spin_lock to seqcount
- Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
- Convey the exit reason to userspace on emulation failure
- Configure time between NX page recovery iterations
- Expose Predictive Store Forwarding Disable CPUID leaf
- Allocate page tracking data structures lazily (if the i915 KVM-GT
functionality is not compiled in)
- Cleanups, fixes and optimizations for the shadow MMU code
s390:
- SIGP Fixes
- initial preparations for lazy destroy of secure VMs
- storage key improvements/fixes
- Log the guest CPNC
Starting from this release, KVM-PPC patches will come from Michael
Ellerman's PPC tree"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
RISC-V: KVM: fix boolreturn.cocci warnings
RISC-V: KVM: remove unneeded semicolon
RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functions
RISC-V: KVM: Factor-out FP virtualization into separate sources
KVM: s390: add debug statement for diag 318 CPNC data
KVM: s390: pv: properly handle page flags for protected guests
KVM: s390: Fix handle_sske page fault handling
KVM: x86: SGX must obey the KVM_INTERNAL_ERROR_EMULATION protocol
KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_info
KVM: x86: Clarify the kvm_run.emulation_failure structure layout
KVM: s390: Add a routine for setting userspace CPU state
KVM: s390: Simplify SIGP Set Arch handling
KVM: s390: pv: avoid stalls when making pages secure
KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
KVM: s390: pv: avoid double free of sida page
KVM: s390: pv: add macros for UVC CC values
s390/mm: optimize reset_guest_reference_bit()
s390/mm: optimize set_guest_storage_key()
s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
...
by confidential computing solutions to query different aspects of the
system. The intent behind it is to unify testing of such aspects instead
of having each confidential computing solution add its own set of tests
to code paths in the kernel, leading to an unwieldy mess.
-----BEGIN PGP SIGNATURE-----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=Na0U
-----END PGP SIGNATURE-----
Merge tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic confidential computing updates from Borislav Petkov:
"Add an interface called cc_platform_has() which is supposed to be used
by confidential computing solutions to query different aspects of the
system.
The intent behind it is to unify testing of such aspects instead of
having each confidential computing solution add its own set of tests
to code paths in the kernel, leading to an unwieldy mess"
* tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide: Replace the use of mem_encrypt_active() with cc_platform_has()
x86/sev: Replace occurrences of sev_es_active() with cc_platform_has()
x86/sev: Replace occurrences of sev_active() with cc_platform_has()
x86/sme: Replace occurrences of sme_active() with cc_platform_has()
powerpc/pseries/svm: Add a powerpc version of cc_platform_has()
x86/sev: Add an x86 version of cc_platform_has()
arch/cc: Introduce a function to check for confidential computing features
x86/ioremap: Selectively build arch override encryption functions
- Cleanup of extable fixup handling to be more robust, which in turn
allows to make the FPU exception fixups more robust as well.
- Change the return code for signal frame related failures from explicit
error codes to a boolean fail/success as that's all what the calling
code evaluates.
- A large refactoring of the FPU code to prepare for adding AMX support:
- Distangle the public header maze and remove especially the misnomed
kitchen sink internal.h which is despite it's name included all over
the place.
- Add a proper abstraction for the register buffer storage (struct
fpstate) which allows to dynamically size the buffer at runtime by
flipping the pointer to the buffer container from the default
container which is embedded in task_struct::tread::fpu to a
dynamically allocated container with a larger register buffer.
- Convert the code over to the new fpstate mechanism.
- Consolidate the KVM FPU handling by moving the FPU related code into
the FPU core which removes the number of exports and avoids adding
even more export when AMX has to be supported in KVM. This also
removes duplicated code which was of course unnecessary different and
incomplete in the KVM copy.
- Simplify the KVM FPU buffer handling by utilizing the new fpstate
container and just switching the buffer pointer from the user space
buffer to the KVM guest buffer when entering vcpu_run() and flipping
it back when leaving the function. This cuts the memory requirements
of a vCPU for FPU buffers in half and avoids pointless memory copy
operations.
This also solves the so far unresolved problem of adding AMX support
because the current FPU buffer handling of KVM inflicted a circular
dependency between adding AMX support to the core and to KVM. With
the new scheme of switching fpstate AMX support can be added to the
core code without affecting KVM.
- Replace various variables with proper data structures so the extra
information required for adding dynamically enabled FPU features (AMX)
can be added in one place
- Add AMX (Advanved Matrix eXtensions) support (finally):
AMX is a large XSTATE component which is going to be available with
Saphire Rapids XEON CPUs. The feature comes with an extra MSR (MSR_XFD)
which allows to trap the (first) use of an AMX related instruction,
which has two benefits:
1) It allows the kernel to control access to the feature
2) It allows the kernel to dynamically allocate the large register
state buffer instead of burdening every task with the the extra 8K
or larger state storage.
It would have been great to gain this kind of control already with
AVX512.
The support comes with the following infrastructure components:
1) arch_prctl() to
- read the supported features (equivalent to XGETBV(0))
- read the permitted features for a task
- request permission for a dynamically enabled feature
Permission is granted per process, inherited on fork() and cleared
on exec(). The permission policy of the kernel is restricted to
sigaltstack size validation, but the syscall obviously allows
further restrictions via seccomp etc.
2) A stronger sigaltstack size validation for sys_sigaltstack(2) which
takes granted permissions and the potentially resulting larger
signal frame into account. This mechanism can also be used to
enforce factual sigaltstack validation independent of dynamic
features to help with finding potential victims of the 2K
sigaltstack size constant which is broken since AVX512 support was
added.
3) Exception handling for #NM traps to catch first use of a extended
feature via a new cause MSR. If the exception was caused by the use
of such a feature, the handler checks permission for that
feature. If permission has not been granted, the handler sends a
SIGILL like the #UD handler would do if the feature would have been
disabled in XCR0. If permission has been granted, then a new fpstate
which fits the larger buffer requirement is allocated.
In the unlikely case that this allocation fails, the handler sends
SIGSEGV to the task. That's not elegant, but unavoidable as the
other discussed options of preallocation or full per task
permissions come with their own set of horrors for kernel and/or
userspace. So this is the lesser of the evils and SIGSEGV caused by
unexpected memory allocation failures is not a fundamentally new
concept either.
When allocation succeeds, the fpstate properties are filled in to
reflect the extended feature set and the resulting sizes, the
fpu::fpstate pointer is updated accordingly and the trap is disarmed
for this task permanently.
4) Enumeration and size calculations
5) Trap switching via MSR_XFD
The XFD (eXtended Feature Disable) MSR is context switched with the
same life time rules as the FPU register state itself. The mechanism
is keyed off with a static key which is default disabled so !AMX
equipped CPUs have zero overhead. On AMX enabled CPUs the overhead
is limited by comparing the tasks XFD value with a per CPU shadow
variable to avoid redundant MSR writes. In case of switching from a
AMX using task to a non AMX using task or vice versa, the extra MSR
write is obviously inevitable.
All other places which need to be aware of the variable feature sets
and resulting variable sizes are not affected at all because they
retrieve the information (feature set, sizes) unconditonally from
the fpstate properties.
6) Enable the new AMX states
Note, this is relatively new code despite the fact that AMX support is in
the works for more than a year now.
The big refactoring of the FPU code, which allowed to do a proper
integration has been started exactly 3 weeks ago. Refactoring of the
existing FPU code and of the original AMX patches took a week and has
been subject to extensive review and testing. The only fallout which has
not been caught in review and testing right away was restricted to AMX
enabled systems, which is completely irrelevant for anyone outside Intel
and their early access program. There might be dragons lurking as usual,
but so far the fine grained refactoring has held up and eventual yet
undetected fallout is bisectable and should be easily addressable before
the 5.16 release. Famous last words...
Many thanks to Chang Bae and Dave Hansen for working hard on this and
also to the various test teams at Intel who reserved extra capacity to
follow the rapid development of this closely which provides the
confidence level required to offer this rather large update for inclusion
into 5.16-rc1.
-----BEGIN PGP SIGNATURE-----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=x3WL
-----END PGP SIGNATURE-----
Merge tag 'x86-fpu-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Thomas Gleixner:
- Cleanup of extable fixup handling to be more robust, which in turn
allows to make the FPU exception fixups more robust as well.
- Change the return code for signal frame related failures from
explicit error codes to a boolean fail/success as that's all what the
calling code evaluates.
- A large refactoring of the FPU code to prepare for adding AMX
support:
- Distangle the public header maze and remove especially the
misnomed kitchen sink internal.h which is despite it's name
included all over the place.
- Add a proper abstraction for the register buffer storage (struct
fpstate) which allows to dynamically size the buffer at runtime
by flipping the pointer to the buffer container from the default
container which is embedded in task_struct::tread::fpu to a
dynamically allocated container with a larger register buffer.
- Convert the code over to the new fpstate mechanism.
- Consolidate the KVM FPU handling by moving the FPU related code
into the FPU core which removes the number of exports and avoids
adding even more export when AMX has to be supported in KVM.
This also removes duplicated code which was of course
unnecessary different and incomplete in the KVM copy.
- Simplify the KVM FPU buffer handling by utilizing the new
fpstate container and just switching the buffer pointer from the
user space buffer to the KVM guest buffer when entering
vcpu_run() and flipping it back when leaving the function. This
cuts the memory requirements of a vCPU for FPU buffers in half
and avoids pointless memory copy operations.
This also solves the so far unresolved problem of adding AMX
support because the current FPU buffer handling of KVM inflicted
a circular dependency between adding AMX support to the core and
to KVM. With the new scheme of switching fpstate AMX support can
be added to the core code without affecting KVM.
- Replace various variables with proper data structures so the
extra information required for adding dynamically enabled FPU
features (AMX) can be added in one place
- Add AMX (Advanced Matrix eXtensions) support (finally):
AMX is a large XSTATE component which is going to be available with
Saphire Rapids XEON CPUs. The feature comes with an extra MSR
(MSR_XFD) which allows to trap the (first) use of an AMX related
instruction, which has two benefits:
1) It allows the kernel to control access to the feature
2) It allows the kernel to dynamically allocate the large register
state buffer instead of burdening every task with the the extra
8K or larger state storage.
It would have been great to gain this kind of control already with
AVX512.
The support comes with the following infrastructure components:
1) arch_prctl() to
- read the supported features (equivalent to XGETBV(0))
- read the permitted features for a task
- request permission for a dynamically enabled feature
Permission is granted per process, inherited on fork() and
cleared on exec(). The permission policy of the kernel is
restricted to sigaltstack size validation, but the syscall
obviously allows further restrictions via seccomp etc.
2) A stronger sigaltstack size validation for sys_sigaltstack(2)
which takes granted permissions and the potentially resulting
larger signal frame into account. This mechanism can also be used
to enforce factual sigaltstack validation independent of dynamic
features to help with finding potential victims of the 2K
sigaltstack size constant which is broken since AVX512 support
was added.
3) Exception handling for #NM traps to catch first use of a extended
feature via a new cause MSR. If the exception was caused by the
use of such a feature, the handler checks permission for that
feature. If permission has not been granted, the handler sends a
SIGILL like the #UD handler would do if the feature would have
been disabled in XCR0. If permission has been granted, then a new
fpstate which fits the larger buffer requirement is allocated.
In the unlikely case that this allocation fails, the handler
sends SIGSEGV to the task. That's not elegant, but unavoidable as
the other discussed options of preallocation or full per task
permissions come with their own set of horrors for kernel and/or
userspace. So this is the lesser of the evils and SIGSEGV caused
by unexpected memory allocation failures is not a fundamentally
new concept either.
When allocation succeeds, the fpstate properties are filled in to
reflect the extended feature set and the resulting sizes, the
fpu::fpstate pointer is updated accordingly and the trap is
disarmed for this task permanently.
4) Enumeration and size calculations
5) Trap switching via MSR_XFD
The XFD (eXtended Feature Disable) MSR is context switched with
the same life time rules as the FPU register state itself. The
mechanism is keyed off with a static key which is default
disabled so !AMX equipped CPUs have zero overhead. On AMX enabled
CPUs the overhead is limited by comparing the tasks XFD value
with a per CPU shadow variable to avoid redundant MSR writes. In
case of switching from a AMX using task to a non AMX using task
or vice versa, the extra MSR write is obviously inevitable.
All other places which need to be aware of the variable feature
sets and resulting variable sizes are not affected at all because
they retrieve the information (feature set, sizes) unconditonally
from the fpstate properties.
6) Enable the new AMX states
Note, this is relatively new code despite the fact that AMX support
is in the works for more than a year now.
The big refactoring of the FPU code, which allowed to do a proper
integration has been started exactly 3 weeks ago. Refactoring of the
existing FPU code and of the original AMX patches took a week and has
been subject to extensive review and testing. The only fallout which
has not been caught in review and testing right away was restricted
to AMX enabled systems, which is completely irrelevant for anyone
outside Intel and their early access program. There might be dragons
lurking as usual, but so far the fine grained refactoring has held up
and eventual yet undetected fallout is bisectable and should be
easily addressable before the 5.16 release. Famous last words...
Many thanks to Chang Bae and Dave Hansen for working hard on this and
also to the various test teams at Intel who reserved extra capacity
to follow the rapid development of this closely which provides the
confidence level required to offer this rather large update for
inclusion into 5.16-rc1
* tag 'x86-fpu-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
Documentation/x86: Add documentation for using dynamic XSTATE features
x86/fpu: Include vmalloc.h for vzalloc()
selftests/x86/amx: Add context switch test
selftests/x86/amx: Add test cases for AMX state management
x86/fpu/amx: Enable the AMX feature in 64-bit mode
x86/fpu: Add XFD handling for dynamic states
x86/fpu: Calculate the default sizes independently
x86/fpu/amx: Define AMX state components and have it used for boot-time checks
x86/fpu/xstate: Prepare XSAVE feature table for gaps in state component numbers
x86/fpu/xstate: Add fpstate_realloc()/free()
x86/fpu/xstate: Add XFD #NM handler
x86/fpu: Update XFD state where required
x86/fpu: Add sanity checks for XFD
x86/fpu: Add XFD state to fpstate
x86/msr-index: Add MSRs for XFD
x86/cpufeatures: Add eXtended Feature Disabling (XFD) feature bit
x86/fpu: Reset permission and fpstate on exec()
x86/fpu: Prepare fpu_clone() for dynamically enabled features
x86/fpu/signal: Prepare for variable sigframe length
x86/signal: Use fpu::__state_user_size for sigalt stack validation
...
- Improve retpoline code patching by separating it from alternatives which
reduces memory footprint and allows to do better optimizations in the
actual runtime patching.
- Add proper retpoline support for x86/BPF
- Address noinstr warnings in x86/kvm, lockdep and paravirtualization code
- Add support to handle pv_opsindirect calls in the noinstr analysis
- Classify symbols upfront and cache the result to avoid redundant
str*cmp() invocations.
- Add a CFI hash to reduce memory consumption which also reduces runtime
on a allyesconfig by ~50%
- Adjust XEN code to make objtool handling more robust and as a side
effect to prevent text fragmentation due to placement of the hypercall
page.
-----BEGIN PGP SIGNATURE-----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=pfZi
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Thomas Gleixner:
- Improve retpoline code patching by separating it from alternatives
which reduces memory footprint and allows to do better optimizations
in the actual runtime patching.
- Add proper retpoline support for x86/BPF
- Address noinstr warnings in x86/kvm, lockdep and paravirtualization
code
- Add support to handle pv_opsindirect calls in the noinstr analysis
- Classify symbols upfront and cache the result to avoid redundant
str*cmp() invocations.
- Add a CFI hash to reduce memory consumption which also reduces
runtime on a allyesconfig by ~50%
- Adjust XEN code to make objtool handling more robust and as a side
effect to prevent text fragmentation due to placement of the
hypercall page.
* tag 'objtool-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
bpf,x86: Respect X86_FEATURE_RETPOLINE*
bpf,x86: Simplify computing label offsets
x86,bugs: Unconditionally allow spectre_v2=retpoline,amd
x86/alternative: Add debug prints to apply_retpolines()
x86/alternative: Try inline spectre_v2=retpoline,amd
x86/alternative: Handle Jcc __x86_indirect_thunk_\reg
x86/alternative: Implement .retpoline_sites support
x86/retpoline: Create a retpoline thunk array
x86/retpoline: Move the retpoline thunk declarations to nospec-branch.h
x86/asm: Fixup odd GEN-for-each-reg.h usage
x86/asm: Fix register order
x86/retpoline: Remove unused replacement symbols
objtool,x86: Replace alternatives with .retpoline_sites
objtool: Shrink struct instruction
objtool: Explicitly avoid self modifying code in .altinstr_replacement
objtool: Classify symbols
objtool: Support pv_opsindirect calls for noinstr
x86/xen: Rework the xen_{cpu,irq,mmu}_opsarrays
x86/xen: Mark xen_force_evtchn_callback() noinstr
x86/xen: Make irq_disable() noinstr
...
* Fixes for Xen emulator bugs showing up as debug kernel WARNs
* Fix another issue with SEV/ES string I/O VMGEXITs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmF6uGIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNRagf/Srvk9lNcRh4cEzsczErKMyr3xOqA
jgsTSqgl1ExJI9sBLMpVYBOFGILMaMSrhLPIltKPy0Bj/E+hw8WOQwPa44QjWlSD
MAUxO1Nryt9Luc2L8uSd1c//g4fr4V1BhOaumk1lM14Q8EDfQBcDIMI2ZKueMU1+
2Q+n8/AsG63jQIINwKNidof0dzRtbfcE30Wq/8QHttIPo5wt6l0YClOlOikqNY8N
5+WSQFmuutHIXftq5Jb/Ldn/+HVukWZyZOEVwLnBpM9uBvIubNgcEakqvxsaVtAn
FHdvnA+Bk99/Xuhl+wRLQo8ofzQIQ13RQv3HPArJAJv34oAJZx2rNObVlA==
=6ofB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Fixes for s390 interrupt delivery
- Fixes for Xen emulator bugs showing up as debug kernel WARNs
- Fix another issue with SEV/ES string I/O VMGEXITs
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Take srcu lock in post_kvm_run_save()
KVM: SEV-ES: fix another issue with string I/O VMGEXITs
KVM: x86/xen: Fix kvm_xen_has_interrupt() sleeping in kvm_vcpu_block()
KVM: x86: switch pvclock_gtod_sync_lock to a raw spinlock
KVM: s390: preserve deliverable_mask in __airqs_kick_single_vcpu
KVM: s390: clear kicked_mask before sleeping again
If the guest requests string I/O from the hypervisor via VMGEXIT,
SW_EXITINFO2 will contain the REP count. However, sev_es_string_io
was incorrectly treating it as the size of the GHCB buffer in
bytes.
This fixes the "outsw" test in the experimental SEV tests of
kvm-unit-tests.
Cc: stable@vger.kernel.org
Fixes: 7ed9abfe8e ("KVM: SVM: Support string IO operations for an SEV-ES guest")
Reported-by: Marc Orr <marcorr@google.com>
Tested-by: Marc Orr <marcorr@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extend the get_exit_info static call to provide the reason for the VM
exit. Modify relevant trace points to use this rather than extracting
the reason in the caller.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210920103737.2696756-3-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the upcoming AMX support it's necessary to do a proper integration with
KVM. Currently KVM allocates two FPU structs which are used for saving the user
state of the vCPU thread and restoring the guest state when entering
vcpu_run() and doing the reverse operation before leaving vcpu_run().
With the new fpstate mechanism this can be reduced to one extra buffer by
swapping the fpstate pointer in current:🧵:fpu. This makes the
upcoming support for AMX and XFD simpler because then fpstate information
(features, sizes, xfd) are always consistent and it does not require any
nasty workarounds.
Convert the KVM FPU code over to this new scheme.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211022185313.019454292@linutronix.de
Move SVM's assertion that vCPU's APICv state is consistent with its VM's
state out of svm_vcpu_run() and into x86's common inner run loop. The
assertion and underlying logic is not unique to SVM, it's just that SVM
has more inhibiting conditions and thus is more likely to run headfirst
into any KVM bugs.
Add relevant comments to document exactly why the update path has unusual
ordering between the update the kick, why said ordering is safe, and also
the basic rules behind the assertion in the run loop.
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211022004927.1448382-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paul pointed out the error messages when KVM fails to load are unhelpful
in understanding exactly what went wrong if userspace probes the "wrong"
module.
Add a mandatory kvm_x86_ops field to track vendor module names, kvm_intel
and kvm_amd, and use the name for relevant error message when KVM fails
to load so that the user knows which module failed to load.
Opportunistically tweak the "disabled by bios" error message to clarify
that _support_ was disabled, not that the module itself was magically
disabled by BIOS.
Suggested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211018183929.897461-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flush the destination page before invoking RECEIVE_UPDATE_DATA, as the
PSP encrypts the data with the guest's key when writing to guest memory.
If the target memory was not previously encrypted, the cache may contain
dirty, unecrypted data that will persist on non-coherent systems.
Fixes: 15fb7de1a7 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command")
Cc: stable@vger.kernel.org
Cc: Peter Gonda <pgonda@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Masahiro Kozuka <masa.koz@kozuka.jp>
[sean: converted bug report to changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210914210951.2994260-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The size of the GHCB scratch area is limited to 16 KiB (GHCB_SCRATCH_AREA_LIMIT),
so there is no need for it to be a u64. This fixes a build error on 32-bit
systems:
i686-linux-gnu-ld: arch/x86/kvm/svm/sev.o: in function `sev_es_string_io:
sev.c:(.text+0x110f): undefined reference to `__udivdi3'
Cc: stable@vger.kernel.org
Fixes: 019057bd73 ("KVM: SEV-ES: fix length of string I/O")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The refactoring in commit bb18a67774 ("KVM: SEV: Acquire
vcpu mutex when updating VMSA") left behind the assignment to
svm->vcpu.arch.guest_state_protected; add it back.
Signed-off-by: Peter Gonda <pgonda@google.com>
[Delta between v2 and v3 of Peter's patch, which had already been
committed; the commit message is my own. - Paolo]
Fixes: bb18a67774 ("KVM: SEV: Acquire vcpu mutex when updating VMSA")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The size of the data in the scratch buffer is not divided by the size of
each port I/O operation, so vcpu->arch.pio.count ends up being larger
than it should be by a factor of size.
Cc: stable@vger.kernel.org
Fixes: 7ed9abfe8e ("KVM: SVM: Support string IO operations for an SEV-ES guest")
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace uses of sev_active() with the more generic cc_platform_has()
using CC_ATTR_GUEST_MEM_ENCRYPT. If future support is added for other
memory encryption technologies, the use of CC_ATTR_GUEST_MEM_ENCRYPT
can be updated, as required.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-7-bp@alien8.de
According to section "TLB Flush" in APM vol 2,
"Support for TLB_CONTROL commands other than the first two, is
optional and is indicated by CPUID Fn8000_000A_EDX[FlushByAsid].
All encodings of TLB_CONTROL not defined in the APM are reserved."
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <20210920235134.101970-3-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was tested by booting a nested guest with TSC=1Ghz,
observing the clocks, and doing about 100 cycles of migration.
Note that qemu patch is needed to support migration because
of a new MSR that needs to be placed in the migration state.
The patch will be sent to the qemu mailing list soon.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-14-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows to easily simulate a CPU without this feature.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-13-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit adc2a23734 ("KVM: nSVM: improve SYSENTER emulation on AMD"),
made init_vmcb set vmload/vmsave intercepts unconditionally,
and relied on svm_vcpu_after_set_cpuid to clear them when possible.
However init_vmcb is also called when the vCPU is reset, and it is
not followed by another call to svm_vcpu_after_set_cpuid because
the CPUID is already set. This mistake makes the VMSAVE/VMLOAD intercept
to be set when it is not needed, and harms performance of the nested
guest.
Extract the relevant parts of svm_vcpu_after_set_cpuid so that they
can be called again on reset.
Fixes: adc2a23734 ("KVM: nSVM: improve SYSENTER emulation on AMD")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is useful for debug and also makes it consistent with
the rest of the SVM optional features.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-9-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the SDM, the CPU never modifies these settings.
It loads them on VM entry and updates an internal copy instead.
Also don't load them from the vmcb12 as we don't expose these
features to the nested guest yet.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move RESET emulation for SVM vCPUs to svm_vcpu_reset(), and drop an extra
init_vmcb() from svm_create_vcpu() in the process. Hopefully KVM will
someday expose a dedicated RESET ioctl(), and in the meantime separating
"create" from "RESET" is a nice cleanup.
Keep the call to svm_switch_vmcb() so that misuse of svm->vmcb at worst
breaks the guest, e.g. premature accesses doesn't cause a NULL pointer
dereference.
Cc: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210921000303.400537-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These field correspond to features that we don't expose yet to L2
While currently there are no CVE worthy features in this field,
if AMD adds more features to this field, that could allow guest
escapes similar to CVE-2021-3653 and CVE-2021-3656.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-6-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GP SVM errata workaround made the #GP handler always emulate
the SVM instructions.
However these instructions #GP in case the operand is not 4K aligned,
but the workaround code didn't check this and we ended up
emulating these instructions anyway.
This is only an emulation accuracy check bug as there is no harm for
KVM to read/write unaligned vmcb images.
Fixes: 82a11e9c6f ("KVM: SVM: Add emulation support for #GP triggered by SVM instructions")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In svm_clear_vintr we try to restore the virtual interrupt
injection that might be pending, but we fail to restore
the interrupt vector.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use return statements instead of nested if, and fix error
path to free all the maps that were allocated.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210913140954.165665-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the KVM_REQ_GET_NESTED_STATE_PAGES on SVM only reloads PDPTRs,
and MSR bitmap, with former not really needed for SMM as SMM exit code
reloads them again from SMRAM'S CR3, and later happens to work
since MSR bitmap isn't modified while in SMM.
Still it is better to be consistient with VMX.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210913140954.165665-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A mirrored SEV-ES VM will need to call KVM_SEV_LAUNCH_UPDATE_VMSA to
setup its vCPUs and have them measured, and their VMSAs encrypted. Without
this change, it is impossible to have mirror VMs as part of SEV-ES VMs.
Also allow the guest status check and debugging commands since they do
not change any guest state.
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Nathan Tempelman <natet@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steve Rutherford <srutherford@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 54526d1fd5 ("KVM: x86: Support KVM VMs sharing SEV context", 2021-04-21)
Message-Id: <20210921150345.2221634-3-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For mirroring SEV-ES the mirror VM will need more then just the ASID.
The FD and the handle are required to all the mirror to call psp
commands. The mirror VM will need to call KVM_SEV_LAUNCH_UPDATE_VMSA to
setup its vCPUs' VMSAs for SEV-ES.
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Nathan Tempelman <natet@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steve Rutherford <srutherford@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 54526d1fd5 ("KVM: x86: Support KVM VMs sharing SEV context", 2021-04-21)
Message-Id: <20210921150345.2221634-2-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Require the target guest page to be writable when pinning memory for
RECEIVE_UPDATE_DATA. Per the SEV API, the PSP writes to guest memory:
The result is then encrypted with GCTX.VEK and written to the memory
pointed to by GUEST_PADDR field.
Fixes: 15fb7de1a7 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command")
Cc: stable@vger.kernel.org
Cc: Peter Gonda <pgonda@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210914210951.2994260-2-seanjc@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DECOMMISSION the current SEV context if binding an ASID fails after
RECEIVE_START. Per AMD's SEV API, RECEIVE_START generates a new guest
context and thus needs to be paired with DECOMMISSION:
The RECEIVE_START command is the only command other than the LAUNCH_START
command that generates a new guest context and guest handle.
The missing DECOMMISSION can result in subsequent SEV launch failures,
as the firmware leaks memory and might not able to allocate more SEV
guest contexts in the future.
Note, LAUNCH_START suffered the same bug, but was previously fixed by
commit 934002cd66 ("KVM: SVM: Call SEV Guest Decommission if ASID
binding fails").
Cc: Alper Gun <alpergun@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: David Rienjes <rientjes@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: John Allen <john.allen@amd.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vipin Sharma <vipinsh@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Marc Orr <marcorr@google.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
Fixes: af43cbbf95 ("KVM: SVM: Add support for KVM_SEV_RECEIVE_START command")
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210912181815.3899316-1-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The update-VMSA ioctl touches data stored in struct kvm_vcpu, and
therefore should not be performed concurrently with any VCPU ioctl
that might cause KVM or the processor to use the same data.
Adds vcpu mutex guard to the VMSA updating code. Refactors out
__sev_launch_update_vmsa() function to deal with per vCPU parts
of sev_launch_update_vmsa().
Fixes: ad73109ae7 ("KVM: SVM: Provide support to launch and run an SEV-ES guest")
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20210915171755.3773766-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as they
do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is disabled
- bugfixes and cleanups, especially with respect to 1) vCPU reset and
2) choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmE2CIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMyqwf+Ky2WoThuQ9Ra0r/m8pUTAx5+gsAf
MmG24rNLE+26X0xuBT9Q5+etYYRLrRTWJvo5cgHooz7muAYW6scR+ho5xzvLTAxi
DAuoijkXsSdGoFCp0OMUHiwG3cgY5N7feTEwLPAb2i6xr/l6SZyCP4zcwiiQbJ2s
UUD0i3rEoNQ02/hOEveud/ENxzUli9cmmgHKXR3kNgsJClSf1fcuLnhg+7EGMhK9
+c2V+hde5y0gmEairQWm22MLMRolNZ5NL4kjykiNh2M5q9YvbHe5+f/JmENlNZMT
bsUQT6Ry1ukuJ0V59rZvUw71KknPFzZ3d6HgW4pwytMq6EJKiISHzRbVnQ==
=FCAB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual
PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as
they do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized
LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is
disabled
- bugfixes and cleanups, especially with respect to vCPU reset and
choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless
necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (210 commits)
KVM: Drop unused kvm_dirty_gfn_invalid()
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
KVM: MMU: mark role_regs and role accessors as maybe unused
KVM: MIPS: Remove a "set but not used" variable
x86/kvm: Don't enable IRQ when IRQ enabled in kvm_wait
KVM: stats: Add VM stat for remote tlb flush requests
KVM: Remove unnecessary export of kvm_{inc,dec}_notifier_count()
KVM: x86/mmu: Move lpage_disallowed_link further "down" in kvm_mmu_page
KVM: x86/mmu: Relocate kvm_mmu_page.tdp_mmu_page for better cache locality
Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"
KVM: x86/mmu: Remove unused field mmio_cached in struct kvm_mmu_page
kvm: x86: Increase KVM_SOFT_MAX_VCPUS to 710
kvm: x86: Increase MAX_VCPUS to 1024
kvm: x86: Set KVM_MAX_VCPU_ID to 4*KVM_MAX_VCPUS
KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation
KVM: x86/mmu: Don't freak out if pml5_root is NULL on 4-level host
KVM: s390: index kvm->arch.idle_mask by vcpu_idx
KVM: s390: Enable specification exception interpretation
KVM: arm64: Trim guest debug exception handling
KVM: SVM: Add 5-level page table support for SVM
...
When the 5-level page table is enabled on host OS, the nested page table
for guest VMs must use 5-level as well. Update get_npt_level() function
to reflect this requirement. In the meanwhile, remove the code that
prevents kvm-amd driver from being loaded when 5-level page table is
detected.
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Message-Id: <20210818165549.3771014-4-wei.huang2@amd.com>
[Tweak condition as suggested by Sean. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD future CPUs will require a 5-level NPT if host CR4.LA57 is set.
To prevent kvm_mmu_get_tdp_level() from incorrectly changing NPT level
on behalf of CPUs, add a new parameter in kvm_configure_mmu() to force
a fixed TDP level.
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Message-Id: <20210818165549.3771014-2-wei.huang2@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split the check for having a vmexit handler to svm_check_exit_valid,
and make svm_handle_invalid_exit only handle a vmexit that is
already not valid.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210811122927.900604-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
APIC base relocation is not supported anyway and won't work
correctly so just drop the code that handles it and keep AVIC
MMIO bar at the default APIC base.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-17-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently it is possible to have the following scenario:
1. AVIC is disabled by svm_refresh_apicv_exec_ctrl
2. svm_vcpu_blocking calls avic_vcpu_put which does nothing
3. svm_vcpu_unblocking enables the AVIC (due to KVM_REQ_APICV_UPDATE)
and then calls avic_vcpu_load
4. warning is triggered in avic_vcpu_load since
AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK was never cleared
While it is possible to just remove the warning, it seems to be more robust
to fully disable/enable AVIC in svm_refresh_apicv_exec_ctrl by calling the
avic_vcpu_load/avic_vcpu_put
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-16-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that kvm_request_apicv_update doesn't need to drop the kvm->srcu lock,
we can call kvm_request_apicv_update directly.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210810205251.424103-13-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is never a good idea to enter a guest on a vCPU when the
AVIC inhibition state doesn't match the enablement of
the AVIC on the vCPU.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-11-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thanks to the former patches, it is now possible to keep the APICv
memslot always enabled, and it will be invisible to the guest
when it is inhibited
This code is based on a suggestion from Sean Christopherson:
https://lkml.org/lkml/2021/7/19/2970
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-9-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If L1 disables VMLOAD/VMSAVE intercepts, and doesn't enable
Virtual VMLOAD/VMSAVE (currently not supported for the nested hypervisor),
then VMLOAD/VMSAVE must operate on the L1 physical memory, which is only
possible by making L0 intercept these instructions.
Failure to do so allowed the nested guest to run VMLOAD/VMSAVE unintercepted,
and thus read/write portions of the host physical memory.
Fixes: 89c8a4984f ("KVM: SVM: Enable Virtual VMLOAD VMSAVE feature")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Invert the mask of bits that we pick from L2 in
nested_vmcb02_prepare_control
* Invert and explicitly use VIRQ related bits bitmask in svm_clear_vintr
This fixes a security issue that allowed a malicious L1 to run L2 with
AVIC enabled, which allowed the L2 to exploit the uninitialized and enabled
AVIC to read/write the host physical memory at some offsets.
Fixes: 3d6368ef58 ("KVM: SVM: Add VMRUN handler")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the declaration of kvm_spurious_fault() to KVM's "private" x86.h,
it should never be called by anything other than low level KVM code.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
[sean: rebased to a series without __ex()/__kvm_handle_fault_on_reboot()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210809173955.1710866-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the __kvm_handle_fault_on_reboot() and __ex() macros now that all
VMX and SVM instructions use asm goto to handle the fault (or in the
case of VMREAD, completely custom logic). Drop kvm_spurious_fault()'s
asmlinkage annotation as __kvm_handle_fault_on_reboot() was the only
flow that invoked it from assembly code.
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210809173955.1710866-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM SEV code uses bitmaps to manage ASID states. ASID 0 was always skipped
because it is never used by VM. Thus, in existing code, ASID value and its
bitmap postion always has an 'offset-by-1' relationship.
Both SEV and SEV-ES shares the ASID space, thus KVM uses a dynamic range
[min_asid, max_asid] to handle SEV and SEV-ES ASIDs separately.
Existing code mixes the usage of ASID value and its bitmap position by
using the same variable called 'min_asid'.
Fix the min_asid usage: ensure that its usage is consistent with its name;
allocate extra size for ASID 0 to ensure that each ASID has the same value
with its bitmap position. Add comments on ASID bitmap allocation to clarify
the size change.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Marc Orr <marcorr@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Alper Gun <alpergun@google.com>
Cc: Dionna Glaze <dionnaglaze@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vipin Sharma <vipinsh@google.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Message-Id: <20210802180903.159381-1-mizhang@google.com>
[Fix up sev_asid_free to also index by ASID, as suggested by Sean
Christopherson, and use nr_asids in sev_cpu_init. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the raw ASID, not ASID-1, when nullifying the last used VMCB when
freeing an SEV ASID. The consumer, pre_sev_run(), indexes the array by
the raw ASID, thus KVM could get a false negative when checking for a
different VMCB if KVM manages to reallocate the same ASID+VMCB combo for
a new VM.
Note, this cannot cause a functional issue _in the current code_, as
pre_sev_run() also checks which pCPU last did VMRUN for the vCPU, and
last_vmentry_cpu is initialized to -1 during vCPU creation, i.e. is
guaranteed to mismatch on the first VMRUN. However, prior to commit
8a14fe4f0c ("kvm: x86: Move last_cpu into kvm_vcpu_arch as
last_vmentry_cpu"), SVM tracked pCPU on its own and zero-initialized the
last_cpu variable. Thus it's theoretically possible that older versions
of KVM could miss a TLB flush if the first VMRUN is on pCPU0 and the ASID
and VMCB exactly match those of a prior VM.
Fixes: 70cd94e60c ("KVM: SVM: VMRUN should use associated ASID when SEV is enabled")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For an event to be in injected state when nested_svm_vmrun executes,
it must have come from exitintinfo when svm_complete_interrupts ran:
vcpu_enter_guest
static_call(kvm_x86_run) -> svm_vcpu_run
svm_complete_interrupts
// now the event went from "exitintinfo" to "injected"
static_call(kvm_x86_handle_exit) -> handle_exit
svm_invoke_exit_handler
vmrun_interception
nested_svm_vmrun
However, no event could have been in exitintinfo before a VMRUN
vmexit. The code in svm.c is a bit more permissive than the one
in vmx.c:
if (is_external_interrupt(svm->vmcb->control.exit_int_info) &&
exit_code != SVM_EXIT_EXCP_BASE + PF_VECTOR &&
exit_code != SVM_EXIT_NPF && exit_code != SVM_EXIT_TASK_SWITCH &&
exit_code != SVM_EXIT_INTR && exit_code != SVM_EXIT_NMI)
but in any case, a VMRUN instruction would not even start to execute
during an attempted event delivery.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop redundant clears of vcpu->arch.hflags in init_vmcb() since
kvm_vcpu_reset() always clears hflags, and it is also always
zero at vCPU creation time. And of course, the second clearing
in init_vmcb() was always redundant.
Suggested-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-46-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emulate a full #INIT instead of simply initializing the VMCB if the
guest hits a shutdown. Initializing the VMCB but not other vCPU state,
much of which is mirrored by the VMCB, results in incoherent and broken
vCPU state.
Ideally, KVM would not automatically init anything on shutdown, and
instead put the vCPU into e.g. KVM_MP_STATE_UNINITIALIZED and force
userspace to explicitly INIT or RESET the vCPU. Even better would be to
add KVM_MP_STATE_SHUTDOWN, since technically NMI can break shutdown
(and SMI on Intel CPUs).
But, that ship has sailed, and emulating #INIT is the next best thing as
that has at least some connection with reality since there exist bare
metal platforms that automatically INIT the CPU if it hits shutdown.
Fixes: 46fe4ddd9d ("[PATCH] KVM: SVM: Propagate cpu shutdown events to userspace")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-45-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the setting of CR0, CR4, EFER, RFLAGS, and RIP from vendor code to
common x86. VMX and SVM now have near-identical sequences, the only
difference being that VMX updates the exception bitmap. Updating the
bitmap on SVM is unnecessary, but benign. Unfortunately it can't be left
behind in VMX due to the need to update exception intercepts after the
control registers are set.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-37-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move code to stuff vmcb->save.dr6 to its architectural init value from
svm_vcpu_reset() into sev_es_sync_vmsa(). Except for protected guests,
a.k.a. SEV-ES guests, vmcb->save.dr6 is set during VM-Enter, i.e. the
extra write is unnecessary. For SEV-ES, stuffing save->dr6 handles a
theoretical case where the VMSA could be encrypted before the first
KVM_RUN.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-33-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop direct writes to vmcb->save.cr4 during vCPU RESET/INIT, as the
values being written are fully redundant with respect to
svm_set_cr4(vcpu, 0) a few lines earlier. Note, svm_set_cr4() also
correctly forces X86_CR4_PAE when NPT is disabled.
No functional change intended.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-32-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hoist svm_set_cr0() up in the sequence of register initialization during
vCPU RESET/INIT, purely to match VMX so that a future patch can move the
sequences to common x86.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-31-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop unnecessary initialization of vmcb->save.rip during vCPU RESET/INIT,
as svm_vcpu_run() unconditionally propagates VCPU_REGS_RIP to save.rip.
No true functional change intended.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-21-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the EDX initialization at vCPU RESET, which is now identical between
VMX and SVM, into common code.
No functional change intended.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-20-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Consolidate the APIC base RESET logic, which is currently spread out
across both x86 and vendor code. For an in-kernel APIC, the vendor code
is redundant. But for a userspace APIC, KVM relies on the vendor code
to initialize vcpu->arch.apic_base. Hoist the vcpu->arch.apic_base
initialization above the !apic check so that it applies to both flavors
of APIC emulation, and delete the vendor code.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop an explicit MMU reset in SVM's vCPU RESET/INIT flow now that the
common x86 path correctly handles conditional MMU resets, e.g. if INIT
arrives while the vCPU is in 64-bit mode.
This reverts commit ebae871a50 ("kvm: svm: reset mmu on VCPU reset").
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At vCPU RESET/INIT (mostly RESET), stuff EDX with KVM's hardcoded,
default Family-Model-Stepping ID of 0x600 if CPUID.0x1 isn't defined.
At RESET, the CPUID lookup is guaranteed to "miss" because KVM emulates
RESET before exposing the vCPU to userspace, i.e. userspace can't
possibly have done set the vCPU's CPUID model, and thus KVM will always
write '0'. At INIT, using 0x600 is less bad than using '0'.
While initializing EDX to '0' is _extremely_ unlikely to be noticed by
the guest, let alone break the guest, and can be overridden by
userspace for the RESET case, using 0x600 is preferable as it will allow
consolidating the relevant VMX and SVM RESET/INIT logic in the future.
And, digging through old specs suggests that neither Intel nor AMD have
ever shipped a CPU that initialized EDX to '0' at RESET.
Regarding 0x600 as KVM's default Family, it is a sane default and in
many ways the most appropriate. Prior to the 386 implementations, DX
was undefined at RESET. With the 386, 486, 586/P5, and 686/P6/Athlon,
both Intel and AMD set EDX to 3, 4, 5, and 6 respectively. AMD switched
to using '15' as its primary Family with the introduction of AMD64, but
Intel has continued using '6' for the last few decades.
So, '6' is a valid Family for both Intel and AMD CPUs, is compatible
with both 32-bit and 64-bit CPUs (albeit not a perfect fit for 64-bit
AMD), and of the common Families (3 - 6), is the best fit with respect to
KVM's virtual CPU model. E.g. prior to the P6, Intel CPUs did not have a
STI window. Modern operating systems, Linux included, rely on the STI
window, e.g. for "safe halt", and KVM unconditionally assumes the virtual
CPU has an STI window. Thus enumerating a Family ID of 3, 4, or 5 would
be provably wrong.
Opportunistically remove a stale comment.
Fixes: 66f7b72e11 ("KVM: x86: Make register state after reset conform to specification")
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not allow an inexact CPUID "match" when querying the guest's CPUID.0x1
to stuff EDX during INIT. In the common case, where the guest CPU model
is an AMD variant, allowing an inexact match is a nop since KVM doesn't
emulate Intel's goofy "out-of-range" logic for AMD and Hygon. If the
vCPU model happens to be an Intel variant, an inexact match is possible
if and only if the max CPUID leaf is precisely '0'. Aside from the fact
that there's probably no CPU in existence with a single CPUID leaf, if
the max CPUID leaf is '0', that means that CPUID.0.EAX is '0', and thus
an inexact match for CPUID.0x1.EAX will also yield '0'.
So, with lots of twisty logic, no functional change intended.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly set GDTR.base and IDTR.base to zero when intializing the VMCB.
Functionally this only affects INIT, as the bases are implicitly set to
zero on RESET by virtue of the VMCB being zero allocated.
Per AMD's APM, GDTR.base and IDTR.base are zeroed after RESET and INIT.
Fixes: 04d2cc7780 ("KVM: Move main vcpu loop into subarch independent code")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently when SVM is enabled in guest CPUID, AVIC is inhibited as soon
as the guest CPUID is set.
AVIC happens to be fully disabled on all vCPUs by the time any guest
entry starts (if after migration the entry can be nested).
The reason is that currently we disable avic right away on vCPU from which
the kvm_request_apicv_update was called and for this case, it happens to be
called on all vCPUs (by svm_vcpu_after_set_cpuid).
After we stop doing this, AVIC will end up being disabled only when
KVM_REQ_APICV_UPDATE is processed which is after we done switching to the
nested guest.
Fix this by just using vmcb01 in svm_refresh_apicv_exec_ctrl for avic
(which is a right thing to do anyway).
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210713142023.106183-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is possible that AVIC was requested to be disabled but
not yet disabled, e.g if the nested entry is done right
after svm_vcpu_after_set_cpuid.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210713142023.106183-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is possible for AVIC inhibit and AVIC active state to be mismatched.
Currently we disable AVIC right away on vCPU which started the AVIC inhibit
request thus this warning doesn't trigger but at least in theory,
if svm_set_vintr is called at the same time on multiple vCPUs,
the warning can happen.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210713142023.106183-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, svm_hv_vmcb_dirty_nested_enlightenments has an incorrect
dereference of vmcb->control.reserved_sw before the vmcb is checked
for being non-NULL. The compiler is usually sinking the dereference
after the check; instead of doing this ourselves in the source,
ensure that svm_hv_vmcb_dirty_nested_enlightenments is only called
with a non-NULL VMCB.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Untested for now due to issues with my AMD machine. - Paolo]
Make svm_copy_vmrun_state()/svm_copy_vmloadsave_state() interface match
'memcpy(dest, src)' to avoid any confusion.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210719090322.625277-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To match svm_copy_vmrun_state(), rename nested_svm_vmloadsave() to
svm_copy_vmloadsave_state().
Opportunistically add missing braces to 'else' branch in
vmload_vmsave_interception().
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210716144104.465269-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fixes for host SMIs on AMD
* Fixes for guest SMIs on AMD
* Fixes for selftests on s390 and ARM
* Fix memory leak
* Enforce no-instrumentation area on vmentry when hardware
breakpoints are in use.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDwRi4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOt4AgAl6xEkMwDC74d/QFIOA7s2GD3ugfa
z5XqGN1qz/nmEMnuIg6/tjTXDPmn/dfLMqy8RGZfyUv6xbgPcv/7JuFMRILvwGTb
SbOVrGnR/QOhMdlfWH34qDkXeEsthTXSgQgVm/iiED0TttvQYVcZ/E9mgzaWQXor
T1yTug2uAUXJ1EBxY0ZBo2kbh+BvvdmhEF0pksZOuwqZdH3zn3QCXwAwkL/OtUYE
M6nNn3j1LU38C4OK1niXOZZVOuMIdk/l7LyFpjUQTFlIqitQAPtBE5MD+K+A9oC2
Yocxyj2tId1e6o8bLic/oN8/LpdORTvA/wDMj5M1DcMzvxQuQIpGYkcVGg==
=gjVA
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Allow again loading KVM on 32-bit non-PAE builds
- Fixes for host SMIs on AMD
- Fixes for guest SMIs on AMD
- Fixes for selftests on s390 and ARM
- Fix memory leak
- Enforce no-instrumentation area on vmentry when hardware breakpoints
are in use.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: selftests: smm_test: Test SMM enter from L2
KVM: nSVM: Restore nested control upon leaving SMM
KVM: nSVM: Fix L1 state corruption upon return from SMM
KVM: nSVM: Introduce svm_copy_vmrun_state()
KVM: nSVM: Check that VM_HSAVE_PA MSR was set before VMRUN
KVM: nSVM: Check the value written to MSR_VM_HSAVE_PA
KVM: SVM: Fix sev_pin_memory() error checks in SEV migration utilities
KVM: SVM: Return -EFAULT if copy_to_user() for SEV mig packet header fails
KVM: SVM: add module param to control the #SMI interception
KVM: SVM: remove INIT intercept handler
KVM: SVM: #SMI interception must not skip the instruction
KVM: VMX: Remove vmx_msr_index from vmx.h
KVM: X86: Disable hardware breakpoints unconditionally before kvm_x86->run()
KVM: selftests: Address extra memslot parameters in vm_vaddr_alloc
kvm: debugfs: fix memory leak in kvm_create_vm_debugfs
KVM: x86/pmu: Clear anythread deprecated bit when 0xa leaf is unsupported on the SVM
KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmio
KVM: SVM: Revert clearing of C-bit on GPA in #NPF handler
KVM: x86/mmu: Do not apply HPA (memory encryption) mask to GPAs
KVM: x86: Use kernel's x86_phys_bits to handle reduced MAXPHYADDR
...
If the VM was migrated while in SMM, no nested state was saved/restored,
and therefore svm_leave_smm has to load both save and control area
of the vmcb12. Save area is already loaded from HSAVE area,
so now load the control area as well from the vmcb12.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMCB split commit 4995a3685f ("KVM: SVM: Use a separate vmcb for the
nested L2 guest") broke return from SMM when we entered there from guest
(L2) mode. Gen2 WS2016/Hyper-V is known to do this on boot. The problem
manifests itself like this:
kvm_exit: reason EXIT_RSM rip 0x7ffbb280 info 0 0
kvm_emulate_insn: 0:7ffbb280: 0f aa
kvm_smm_transition: vcpu 0: leaving SMM, smbase 0x7ffb3000
kvm_nested_vmrun: rip: 0x000000007ffbb280 vmcb: 0x0000000008224000
nrip: 0xffffffffffbbe119 int_ctl: 0x01020000 event_inj: 0x00000000
npt: on
kvm_nested_intercepts: cr_read: 0000 cr_write: 0010 excp: 40060002
intercepts: fd44bfeb 0000217f 00000000
kvm_entry: vcpu 0, rip 0xffffffffffbbe119
kvm_exit: reason EXIT_NPF rip 0xffffffffffbbe119 info
200000006 1ab000
kvm_nested_vmexit: vcpu 0 reason npf rip 0xffffffffffbbe119 info1
0x0000000200000006 info2 0x00000000001ab000 intr_info 0x00000000
error_code 0x00000000
kvm_page_fault: address 1ab000 error_code 6
kvm_nested_vmexit_inject: reason EXIT_NPF info1 200000006 info2 1ab000
int_info 0 int_info_err 0
kvm_entry: vcpu 0, rip 0x7ffbb280
kvm_exit: reason EXIT_EXCP_GP rip 0x7ffbb280 info 0 0
kvm_emulate_insn: 0:7ffbb280: 0f aa
kvm_inj_exception: #GP (0x0)
Note: return to L2 succeeded but upon first exit to L1 its RIP points to
'RSM' instruction but we're not in SMM.
The problem appears to be that VMCB01 gets irreversibly destroyed during
SMM execution. Previously, we used to have 'hsave' VMCB where regular
(pre-SMM) L1's state was saved upon nested_svm_vmexit() but now we just
switch to VMCB01 from VMCB02.
Pre-split (working) flow looked like:
- SMM is triggered during L2's execution
- L2's state is pushed to SMRAM
- nested_svm_vmexit() restores L1's state from 'hsave'
- SMM -> RSM
- enter_svm_guest_mode() switches to L2 but keeps 'hsave' intact so we have
pre-SMM (and pre L2 VMRUN) L1's state there
- L2's state is restored from SMRAM
- upon first exit L1's state is restored from L1.
This was always broken with regards to svm_get_nested_state()/
svm_set_nested_state(): 'hsave' was never a part of what's being
save and restored so migration happening during SMM triggered from L2 would
never restore L1's state correctly.
Post-split flow (broken) looks like:
- SMM is triggered during L2's execution
- L2's state is pushed to SMRAM
- nested_svm_vmexit() switches to VMCB01 from VMCB02
- SMM -> RSM
- enter_svm_guest_mode() switches from VMCB01 to VMCB02 but pre-SMM VMCB01
is already lost.
- L2's state is restored from SMRAM
- upon first exit L1's state is restored from VMCB01 but it is corrupted
(reflects the state during 'RSM' execution).
VMX doesn't have this problem because unlike VMCB, VMCS keeps both guest
and host state so when we switch back to VMCS02 L1's state is intact there.
To resolve the issue we need to save L1's state somewhere. We could've
created a third VMCB for SMM but that would require us to modify saved
state format. L1's architectural HSAVE area (pointed by MSR_VM_HSAVE_PA)
seems appropriate: L0 is free to save any (or none) of L1's state there.
Currently, KVM does 'none'.
Note, for nested state migration to succeed, both source and destination
hypervisors must have the fix. We, however, don't need to create a new
flag indicating the fact that HSAVE area is now populated as migration
during SMM triggered from L2 was always broken.
Fixes: 4995a3685f ("KVM: SVM: Use a separate vmcb for the nested L2 guest")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Separate the code setting non-VMLOAD-VMSAVE state from
svm_set_nested_state() into its own function. This is going to be
re-used from svm_enter_smm()/svm_leave_smm().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
APM states that "The address written to the VM_HSAVE_PA MSR, which holds
the address of the page used to save the host state on a VMRUN, must point
to a hypervisor-owned page. If this check fails, the WRMSR will fail with
a #GP(0) exception. Note that a value of 0 is not considered valid for the
VM_HSAVE_PA MSR and a VMRUN that is attempted while the HSAVE_PA is 0 will
fail with a #GP(0) exception."
svm_set_msr() already checks that the supplied address is valid, so only
check for '0' is missing. Add it to nested_svm_vmrun().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-3-vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
APM states that #GP is raised upon write to MSR_VM_HSAVE_PA when
the supplied address is not page-aligned or is outside of "maximum
supported physical address for this implementation".
page_address_valid() check seems suitable. Also, forcefully page-align
the address when it's written from VMM.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-2-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
[Add comment about behavior for host-provided values. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use IS_ERR() instead of checking for a NULL pointer when querying for
sev_pin_memory() failures. sev_pin_memory() always returns an error code
cast to a pointer, or a valid pointer; it never returns NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Steve Rutherford <srutherford@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Fixes: d3d1af85e2 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
Fixes: 15fb7de1a7 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210506175826.2166383-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return -EFAULT if copy_to_user() fails; if accessing user memory faults,
copy_to_user() returns the number of bytes remaining, not an error code.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Steve Rutherford <srutherford@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Fixes: d3d1af85e2 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210506175826.2166383-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In theory there are no side effects of not intercepting #SMI,
because then #SMI becomes transparent to the OS and the KVM.
Plus an observation on recent Zen2 CPUs reveals that these
CPUs ignore #SMI interception and never deliver #SMI VMexits.
This is also useful to test nested KVM to see that L1
handles #SMIs correctly in case when L1 doesn't intercept #SMI.
Finally the default remains the same, the SMI are intercepted
by default thus this patch doesn't have any effect unless
non default module param value is used.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210707125100.677203-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kernel never sends real INIT even to CPUs, other than on boot.
Thus INIT interception is an error which should be caught
by a check for an unknown VMexit reason.
On top of that, the current INIT VM exit handler skips
the current instruction which is wrong.
That was added in commit 5ff3a351f6 ("KVM: x86: Move trivial
instruction-based exit handlers to common code").
Fixes: 5ff3a351f6 ("KVM: x86: Move trivial instruction-based exit handlers to common code")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210707125100.677203-3-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 5ff3a351f6 ("KVM: x86: Move trivial instruction-based
exit handlers to common code"), unfortunately made a mistake of
treating nop_on_interception and nop_interception in the same way.
Former does truly nothing while the latter skips the instruction.
SMI VM exit handler should do nothing.
(SMI itself is handled by the host when we do STGI)
Fixes: 5ff3a351f6 ("KVM: x86: Move trivial instruction-based exit handlers to common code")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210707125100.677203-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't clear the C-bit in the #NPF handler, as it is a legal GPA bit for
non-SEV guests, and for SEV guests the C-bit is dropped before the GPA
hits the NPT in hardware. Clearing the bit for non-SEV guests causes KVM
to mishandle #NPFs with that collide with the host's C-bit.
Although the APM doesn't explicitly state that the C-bit is not reserved
for non-SEV, Tom Lendacky confirmed that the following snippet about the
effective reduction due to the C-bit does indeed apply only to SEV guests.
Note that because guest physical addresses are always translated
through the nested page tables, the size of the guest physical address
space is not impacted by any physical address space reduction indicated
in CPUID 8000_001F[EBX]. If the C-bit is a physical address bit however,
the guest physical address space is effectively reduced by 1 bit.
And for SEV guests, the APM clearly states that the bit is dropped before
walking the nested page tables.
If the C-bit is an address bit, this bit is masked from the guest
physical address when it is translated through the nested page tables.
Consequently, the hypervisor does not need to be aware of which pages
the guest has chosen to mark private.
Note, the bogus C-bit clearing was removed from legacy #PF handler in
commit 6d1b867d04 ("KVM: SVM: Don't strip the C-bit from CR2 on #PF
interception").
Fixes: 0ede79e132 ("KVM: SVM: Clear C-bit from the page fault address")
Cc: Peter Gonda <pgonda@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210625020354.431829-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Prevent sigaltstack out of bounds writes. The kernel unconditionally
writes the FPU state to the alternate stack without checking whether
the stack is large enough to accomodate it.
Check the alternate stack size before doing so and in case it's too
small force a SIGSEGV instead of silently corrupting user space data.
- MINSIGSTKZ and SIGSTKSZ are constants in signal.h and have never been
updated despite the fact that the FPU state which is stored on the
signal stack has grown over time which causes trouble in the field
when AVX512 is available on a CPU. The kernel does not expose the
minimum requirements for the alternate stack size depending on the
available and enabled CPU features.
ARM already added an aux vector AT_MINSIGSTKSZ for the same reason.
Add it to x86 as well
- A major cleanup of the x86 FPU code. The recent discoveries of XSTATE
related issues unearthed quite some inconsistencies, duplicated code
and other issues.
The fine granular overhaul addresses this, makes the code more robust
and maintainable, which allows to integrate upcoming XSTATE related
features in sane ways.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmDlcpETHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoeP5D/4i+AgYYeiMLgGb+NS7iaKPfoWo6LIz
y3qdTSA0DQaIYbYivWwRO/g0GYdDMXDWeZalFi7eGnVI8O3eOog+22Zrf/y0UINB
KJHdYd4ApWHhs401022y5hexrWQvnV8w1yQCuj/zLm6eC+AVhdwt2AY+IBoRrdUj
wqY97B/4rJNsBvvqTDn9EeDrJA2y0y0Suc7AhIp2BGMI+dpIdxys8RJDamXNWyDL
gJf0YRgUoiIn3AHKb+fgv60AoxfC175NSg/5/y/scFNXqVlW0Up4YCb7pqG9o2Ga
f3XvtWfbw1N5PmUYjFkALwEkzGUbM3v0RA3xLY2j2WlWm9fBPPy59dt+i/h/VKyA
GrA7i7lcIqX8dfVH6XkrReZBkRDSB6t9SZTvV54jAz5fcIZO2Rg++UFUvI/R6GKK
XCcxukYaArwo+IG62iqDszS3gfLGhcor/cviOeULRC5zMUIO4Jah+IhDnifmShtC
M5s9QzrwIRD/XMewGRQmvkiN4kBfE7jFoBQr1J9leCXJKrM+2JQmMzVInuubTQIq
SdlKOaAIn7xtekz+6XdFG9Gmhck0PCLMJMOLNvQkKWI3KqGLRZ+dAWKK0vsCizAx
0BA7ZeB9w9lFT+D8mQCX77JvW9+VNwyfwIOLIrJRHk3VqVpS5qvoiFTLGJJBdZx4
/TbbRZu7nXDN2w==
=Mq1m
-----END PGP SIGNATURE-----
Merge tag 'x86-fpu-2021-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Thomas Gleixner:
"Fixes and improvements for FPU handling on x86:
- Prevent sigaltstack out of bounds writes.
The kernel unconditionally writes the FPU state to the alternate
stack without checking whether the stack is large enough to
accomodate it.
Check the alternate stack size before doing so and in case it's too
small force a SIGSEGV instead of silently corrupting user space
data.
- MINSIGSTKZ and SIGSTKSZ are constants in signal.h and have never
been updated despite the fact that the FPU state which is stored on
the signal stack has grown over time which causes trouble in the
field when AVX512 is available on a CPU. The kernel does not expose
the minimum requirements for the alternate stack size depending on
the available and enabled CPU features.
ARM already added an aux vector AT_MINSIGSTKSZ for the same reason.
Add it to x86 as well.
- A major cleanup of the x86 FPU code. The recent discoveries of
XSTATE related issues unearthed quite some inconsistencies,
duplicated code and other issues.
The fine granular overhaul addresses this, makes the code more
robust and maintainable, which allows to integrate upcoming XSTATE
related features in sane ways"
* tag 'x86-fpu-2021-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits)
x86/fpu/xstate: Clear xstate header in copy_xstate_to_uabi_buf() again
x86/fpu/signal: Let xrstor handle the features to init
x86/fpu/signal: Handle #PF in the direct restore path
x86/fpu: Return proper error codes from user access functions
x86/fpu/signal: Split out the direct restore code
x86/fpu/signal: Sanitize copy_user_to_fpregs_zeroing()
x86/fpu/signal: Sanitize the xstate check on sigframe
x86/fpu/signal: Remove the legacy alignment check
x86/fpu/signal: Move initial checks into fpu__restore_sig()
x86/fpu: Mark init_fpstate __ro_after_init
x86/pkru: Remove xstate fiddling from write_pkru()
x86/fpu: Don't store PKRU in xstate in fpu_reset_fpstate()
x86/fpu: Remove PKRU handling from switch_fpu_finish()
x86/fpu: Mask PKRU from kernel XRSTOR[S] operations
x86/fpu: Hook up PKRU into ptrace()
x86/fpu: Add PKRU storage outside of task XSAVE buffer
x86/fpu: Dont restore PKRU in fpregs_restore_userspace()
x86/fpu: Rename xfeatures_mask_user() to xfeatures_mask_uabi()
x86/fpu: Move FXSAVE_LEAK quirk info __copy_kernel_to_fpregs()
x86/fpu: Rename __fpregs_load_activate() to fpregs_restore_userregs()
...
This better reflects the purpose of this variable on AMD, since
on AMD the AVIC's memory slot can be enabled and disabled dynamically.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210623113002.111448-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expand the comments for the MMU roles. The interactions with gfn_track
PGD reuse in particular are hairy.
Regarding PGD reuse, add comments in the nested virtualization flows to
call out why kvm_init_mmu() is unconditionally called even when nested
TDP is used.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-50-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move nested NPT's invocation of reset_shadow_zero_bits_mask() into the
MMU proper and unexport said function. Aside from dropping an export,
this is a baby step toward eliminating the call entirely by fixing the
shadow_root_level confusion.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a comment in the nested NPT initialization flow to call out that it
intentionally uses vmcb01 instead current vCPU state to get the effective
hCR4 and hEFER for L1's NPT context.
Note, despite nSVM's efforts to handle the case where vCPU state doesn't
reflect L1 state, the MMU may still do the wrong thing due to pulling
state from the vCPU instead of the passed in CR0/CR4/EFER values. This
will be addressed in future commits.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When configuring KVM's MMU, pass CR0 and CR4 as unsigned longs, and EFER
as a u64 in various flows (mostly MMU). Passing the params as u32s is
functionally ok since all of the affected registers reserve bits 63:32 to
zero (enforced by KVM), but it's technically wrong.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Failed VM-entry is often due to a faulty core. To help identify bad
cores, print the id of the last logical processor that attempted
VM-entry whenever dumping a VMCS or VMCB.
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210621221648.1833148-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
write_pkru() was originally used just to write to the PKRU register. It
was mercifully short and sweet and was not out of place in pgtable.h with
some other pkey-related code.
But, later work included a requirement to also modify the task XSAVE
buffer when updating the register. This really is more related to the
XSAVE architecture than to paging.
Move the read/write_pkru() to asm/pkru.h. pgtable.h won't miss them.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121455.102647114@linutronix.de
Refuse to load KVM if NX support is not available. Shadow paging has
assumed NX support since commit 9167ab7993 ("KVM: vmx, svm: always run
with EFER.NXE=1 when shadow paging is active"), and NPT has assumed NX
support since commit b8e8c8303f ("kvm: mmu: ITLB_MULTIHIT mitigation").
While the NX huge pages mitigation should not be enabled by default for
AMD CPUs, it can be turned on by userspace at will.
Unlike Intel CPUs, AMD does not provide a way for firmware to disable NX
support, and Linux always sets EFER.NX=1 if it is supported. Given that
it's extremely unlikely that a CPU supports NPT but not NX, making NX a
formal requirement is far simpler than adding requirements to the
mitigation flow.
Fixes: 9167ab7993 ("KVM: vmx, svm: always run with EFER.NXE=1 when shadow paging is active")
Fixes: b8e8c8303f ("kvm: mmu: ITLB_MULTIHIT mitigation")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210615164535.2146172-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
reported by syzkaller ("KVM: x86: Immediately reset the MMU context when the SMM
flag is cleared").
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDLldwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPTOgf/XpAehLdWlx2877ulcBD0Kjt0tLvH
OFHRD1Ir0d1Ay3DX8qmxLquXHB4CoDGZBwi1d7AI165kUP/XLmV0bY6TZ74inI/P
CaD8Bsbm8+iBl5jrovEPc+223bK+3OFOvo2pk6M/MlsO/ExRikaPDtHOnkfousbl
nLX8v2qd7ihWyJOdLJMU9pV8E2iczQoCuH9yWBHdCrxRxWtPzkEekPWb0sujByiF
4tD7sqiEA3ugbF1Wm5keQV63NLplfxx+Zun0FV+tbpjjxQWAGl81dP+zmqok0sM/
qQCyZevt6jLLkL+Fn6hI6PP9OTeYreX2fgwhWXs71d2js33yNg5Veqx5Bw==
=Gs/y
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Miscellaneous bugfixes.
The main interesting one is a NULL pointer dereference reported by
syzkaller ("KVM: x86: Immediately reset the MMU context when the SMM
flag is cleared")"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Fix kvm_check_cap() assertion
KVM: x86/mmu: Calculate and check "full" mmu_role for nested MMU
KVM: X86: Fix x86_emulator slab cache leak
KVM: SVM: Call SEV Guest Decommission if ASID binding fails
KVM: x86: Immediately reset the MMU context when the SMM flag is cleared
KVM: x86: Fix fall-through warnings for Clang
KVM: SVM: fix doc warnings
KVM: selftests: Fix compiling errors when initializing the static structure
kvm: LAPIC: Restore guard to prevent illegal APIC register access
Remove the @reset_roots param from kvm_init_mmu(), the one user,
kvm_mmu_reset_context() has already unloaded the MMU and thus freed and
invalidated all roots. This also happens to be why the reset_roots=true
paths doesn't leak roots; they're already invalid.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop skip_mmu_sync and skip_tlb_flush from __kvm_mmu_new_pgd() now that
all call sites unconditionally skip both the sync and flush.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce nested_svm_transition_tlb_flush() and use it force an MMU sync
and TLB flush on nSVM VM-Enter and VM-Exit instead of sneaking the logic
into the __kvm_mmu_new_pgd() call sites. Add a partial todo list to
document issues that need to be addressed before the unconditional sync
and flush can be modified to look more like nVMX's logic.
In addition to making nSVM's forced flushing more overt (guess who keeps
losing track of it), the new helper brings further convergence between
nSVM and nVMX, and also sets the stage for dropping the "skip" params
from __kvm_mmu_new_pgd().
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609234235.1244004-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
if new KVM_*_SREGS2 ioctls are used, the PDPTRs are
a part of the migration state and are correctly
restored by those ioctls.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-9-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Small refactoring that will be used in the next patch.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-7-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document the actual reason why we need to do it
on migration and move the call to svm_set_nested_state
to be closer to VMX code.
To avoid loading the PDPTRs from possibly not up to date memory map,
in nested_svm_load_cr3 after the move, move this code to
.get_nested_state_pages.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210607090203.133058-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the "PDPTRs unchanged" check to skip PDPTR loading during nested
SVM transitions as it's not at all an optimization. Reading guest memory
to get the PDPTRs isn't magically cheaper by doing it in pdptrs_changed(),
and if the PDPTRs did change, KVM will end up doing the read twice.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210607090203.133058-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From Hyper-V TLFS:
"The hypervisor exposes hypercalls (HvFlushVirtualAddressSpace,
HvFlushVirtualAddressSpaceEx, HvFlushVirtualAddressList, and
HvFlushVirtualAddressListEx) that allow operating systems to more
efficiently manage the virtual TLB. The L1 hypervisor can choose to
allow its guest to use those hypercalls and delegate the responsibility
to handle them to the L0 hypervisor. This requires the use of a
partition assist page."
Add the Direct Virtual Flush support for SVM.
Related VMX changes:
commit 6f6a657c99 ("KVM/Hyper-V/VMX: Add direct tlb flush support")
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Message-Id: <fc8d24d8eb7017266bb961e39a171b0caf298d7f.1622730232.git.viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enlightened MSR-Bitmap as per TLFS:
"The L1 hypervisor may collaborate with the L0 hypervisor to make MSR
accesses more efficient. It can enable enlightened MSR bitmaps by setting
the corresponding field in the enlightened VMCS to 1. When enabled, L0
hypervisor does not monitor the MSR bitmaps for changes. Instead, the L1
hypervisor must invalidate the corresponding clean field after making
changes to one of the MSR bitmaps."
Enable this for SVM.
Related VMX changes:
commit ceef7d10df ("KVM: x86: VMX: hyper-v: Enlightened MSR-Bitmap support")
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Message-Id: <87df0710f95d28b91cc4ea014fc4d71056eebbee.1622730232.git.viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SVM added support for certain reserved fields to be used by
software or hypervisor. Add the following reserved fields:
- VMCB offset 0x3e0 - 0x3ff
- Clean bit 31
- SVM intercept exit code 0xf0000000
Later patches will make use of this for supporting Hyper-V
nested virtualization enhancements.
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Message-Id: <a1f17a43a8e9e751a1a9cc0281649d71bdbf721b.1622730232.git.viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the 'nested_run' statistic counts all guest-entry attempts,
including those that fail during vmentry checks on Intel and during
consistency checks on AMD. Convert this statistic to count only those
guest-entries that make it past these state checks and make it to guest
code. This will tell us the number of guest-entries that actually executed
or tried to execute guest code.
Signed-off-by: Krish Sadhukhan <Krish.Sadhukhan@oracle.com>
Message-Id: <20210609180340.104248-2-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that .post_leave_smm() is gone, drop "pre_" from the remaining
helpers. The helpers aren't invoked purely before SMI/RSM processing,
e.g. both helpers are invoked after state is snapshotted (from regs or
SMRAM), and the RSM helper is invoked after some amount of register state
has been stuffed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210609185619.992058-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that APICv/AVIC enablement is kept in common 'enable_apicv' variable,
there's no need to call kvm_apicv_init() from vendor specific code.
No functional change intended.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210609150911.1471882-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unify VMX and SVM code by moving APICv/AVIC enablement tracking to common
'enable_apicv' variable. Note: unlike APICv, AVIC is disabled by default.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210609150911.1471882-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently vmx_vcpu_load_vmcs() writes the TSC_MULTIPLIER field of the
VMCS every time the VMCS is loaded. Instead of doing this, set this
field from common code on initialization and whenever the scaling ratio
changes.
Additionally remove vmx->current_tsc_ratio. This field is redundant as
vcpu->arch.tsc_scaling_ratio already tracks the current TSC scaling
ratio. The vmx->current_tsc_ratio field is only used for avoiding
unnecessary writes but it is no longer needed after removing the code
from the VMCS load path.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Message-Id: <20210607105438.16541-1-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The write_l1_tsc_offset() callback has a misleading name. It does not
set L1's TSC offset, it rather updates the current TSC offset which
might be different if a nested guest is executing. Additionally, both
the vmx and svm implementations use the same logic for calculating the
current TSC before writing it to hardware.
Rename the function and move the common logic to the caller. The vmx/svm
specific code now merely sets the given offset to the corresponding
hardware structure.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-9-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to implement as much of the nested TSC scaling logic as
possible in common code, we need these vendor callbacks for retrieving
the TSC offset and the TSC multiplier that L1 has set for L2.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-7-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Send SEV_CMD_DECOMMISSION command to PSP firmware if ASID binding
fails. If a failure happens after a successful LAUNCH_START command,
a decommission command should be executed. Otherwise, guest context
will be unfreed inside the AMD SP. After the firmware will not have
memory to allocate more SEV guest context, LAUNCH_START command will
begin to fail with SEV_RET_RESOURCE_LIMIT error.
The existing code calls decommission inside sev_unbind_asid, but it is
not called if a failure happens before guest activation succeeds. If
sev_bind_asid fails, decommission is never called. PSP firmware has a
limit for the number of guests. If sev_asid_binding fails many times,
PSP firmware will not have resources to create another guest context.
Cc: stable@vger.kernel.org
Fixes: 59414c9892 ("KVM: SVM: Add support for KVM_SEV_LAUNCH_START command")
Reported-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Alper Gun <alpergun@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210610174604.2554090-1-alpergun@google.com>
Fix kernel-doc warnings:
arch/x86/kvm/svm/avic.c:233: warning: Function parameter or member 'activate' not described in 'avic_update_access_page'
arch/x86/kvm/svm/avic.c:233: warning: Function parameter or member 'kvm' not described in 'avic_update_access_page'
arch/x86/kvm/svm/avic.c:781: warning: Function parameter or member 'e' not described in 'get_pi_vcpu_info'
arch/x86/kvm/svm/avic.c:781: warning: Function parameter or member 'kvm' not described in 'get_pi_vcpu_info'
arch/x86/kvm/svm/avic.c:781: warning: Function parameter or member 'svm' not described in 'get_pi_vcpu_info'
arch/x86/kvm/svm/avic.c:781: warning: Function parameter or member 'vcpu_info' not described in 'get_pi_vcpu_info'
arch/x86/kvm/svm/avic.c:1009: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Message-Id: <20210609122217.2967131-1-chenxiaosong2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
without nested page tables.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDAVpQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNkOgf9F97eFxAdod3/wbW9EbsUPR5bMTLE
+R6Hmvw+yCm/W2cycVGdCSh1BEKNuZN/XfHln2cYVfVr6ndog58A4Y0urFAhTROv
IHs8TCA5biQitoZ716l88ExOitnqJiSmMhGex969+zm1Lb9MQo1KA/zxERlqCi3s
Pfcxb6I8VbD9LEb6NaQdDgQoslJo1tzhe9gGYAYrpMOZujpj1RPeIOZIfeII0MP/
g14/JSar8cXc9QJ6zbiKn8HhpmzGJnaIsyFFL2RMIBlKvxsnpOU6VmisLTL9407o
P246Vq59BM8pdRCVUW9W9hLr2ho8lmi+ZYXASCm+qfn8cLaHyRCqSK56ZQ==
=nW43
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes, including a TLB flush fix that affects processors without
nested page tables"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: fix previous commit for 32-bit builds
kvm: avoid speculation-based attacks from out-of-range memslot accesses
KVM: x86: Unload MMU on guest TLB flush if TDP disabled to force MMU sync
KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message
selftests: kvm: Add support for customized slot0 memory size
KVM: selftests: introduce P47V64 for s390x
KVM: x86: Ensure PV TLB flush tracepoint reflects KVM behavior
KVM: X86: MMU: Use the correct inherited permissions to get shadow page
KVM: LAPIC: Write 0 to TMICT should also cancel vmx-preemption timer
KVM: SVM: Fix SEV SEND_START session length & SEND_UPDATE_DATA query length after commit 238eca821c
Commit 238eca821c ("KVM: SVM: Allocate SEV command structures on local stack")
uses the local stack to allocate the structures used to communicate with the PSP,
which were earlier being kzalloced. This breaks SEV live migration for
computing the SEND_START session length and SEND_UPDATE_DATA query length as
session_len and trans_len and hdr_len fields are not zeroed respectively for
the above commands before issuing the SEV Firmware API call, hence the
firmware returns incorrect session length and update data header or trans length.
Also the SEV Firmware API returns SEV_RET_INVALID_LEN firmware error
for these length query API calls, and the return value and the
firmware error needs to be passed to the userspace as it is, so
need to remove the return check in the KVM code.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-Id: <20210607061532.27459-1-Ashish.Kalra@amd.com>
Fixes: 238eca821c ("KVM: SVM: Allocate SEV command structures on local stack")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Another state update on exit to userspace fix
* Prevent the creation of mixed 32/64 VMs
* Fix regression with irqbypass not restarting the guest on failed connect
* Fix regression with debug register decoding resulting in overlapping access
* Commit exception state on exit to usrspace
* Fix the MMU notifier return values
* Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
* fix guest missed wakeup with assigned devices
* fix WARN reported by syzkaller
* do not use BIT() in UAPI headers
* make the kvm_amd.avic parameter bool
PPC fixes:
* make halt polling heuristics consistent with other architectures
selftests:
* various fixes
* new performance selftest memslot_perf_test
* test UFFD minor faults in demand_paging_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCyF0MUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOHSgf/Q4Hm5e12Bj2xJy6A+iShnrbbT8PW
hcIIOA7zGWXfjVYcBV7anbj7CcpzfIz0otcRBABa5mkhj+fb3YmPEb0EzCPi4Hru
zxpcpB2w7W7WtUOIKe2EmaT+4Pk6/iLcfr8UMHMqx460akE9OmIg10QNWai3My/3
RIOeakSckBI9e/1TQZbxH66dsLwCT0lLco7i7AWHdFxkzUQyoA34HX5pczOCBsO5
3nXH+/txnRVhqlcyzWLVVGVzFqmpHtBqkIInDOXfUqIoxo/gOhOgF1QdMUEKomxn
5ZFXlL5IXNtr+7yiI67iHX7CWkGZE9oJ04TgPHn6LR6wRnVvc3JInzcB5Q==
=ollO
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
- Fix regression with irqbypass not restarting the guest on failed
connect
- Fix regression with debug register decoding resulting in
overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
- fix guest missed wakeup with assigned devices
- fix WARN reported by syzkaller
- do not use BIT() in UAPI headers
- make the kvm_amd.avic parameter bool
PPC fixes:
- make halt polling heuristics consistent with other architectures
selftests:
- various fixes
- new performance selftest memslot_perf_test
- test UFFD minor faults in demand_paging_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
KVM: x86/mmu: Fix comment mentioning skip_4k
KVM: VMX: update vcpu posted-interrupt descriptor when assigning device
KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK
KVM: x86: add start_assignment hook to kvm_x86_ops
KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch
selftests: kvm: do only 1 memslot_perf_test run by default
KVM: X86: Use _BITUL() macro in UAPI headers
KVM: selftests: add shared hugetlbfs backing source type
KVM: selftests: allow using UFFD minor faults for demand paging
KVM: selftests: create alias mappings when using shared memory
KVM: selftests: add shmem backing source type
KVM: selftests: refactor vm_mem_backing_src_type flags
KVM: selftests: allow different backing source types
KVM: selftests: compute correct demand paging size
KVM: selftests: simplify setup_demand_paging error handling
KVM: selftests: Print a message if /dev/kvm is missing
...
Make it consistent with kvm_intel.enable_apicv.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AVIC dependency on CONFIG_X86_LOCAL_APIC is dead code since
commit e42eef4ba3 ("KVM: add X86_LOCAL_APIC dependency").
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210518144339.1987982-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
- Fix regression with irqbypass not restarting the guest on failed connect
- Fix regression with debug register decoding resulting in overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
-----BEGIN PGP SIGNATURE-----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=57tg
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.13, take #1
- Fix regression with irqbypass not restarting the guest on failed connect
- Fix regression with debug register decoding resulting in overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
- Reorganize SEV code to streamline and simplify future development
-----BEGIN PGP SIGNATURE-----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=ENfF
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"The three SEV commits are not really urgent material. But we figured
since getting them in now will avoid a huge amount of conflicts
between future SEV changes touching tip, the kvm and probably other
trees, sending them to you now would be best.
The idea is that the tip, kvm etc branches for 5.14 will all base
ontop of -rc2 and thus everything will be peachy. What is more, those
changes are purely mechanical and defines movement so they should be
fine to go now (famous last words).
Summary:
- Enable -Wundef for the compressed kernel build stage
- Reorganize SEV code to streamline and simplify future development"
* tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Enable -Wundef
x86/msr: Rename MSR_K8_SYSCFG to MSR_AMD64_SYSCFG
x86/sev: Move GHCB MSR protocol and NAE definitions in a common header
x86/sev-es: Rename sev-es.{ch} to sev.{ch}
* Fix virtualization of RDPID
* Virtualization of DR6_BUS_LOCK, which on bare metal is new in
the 5.13 merge window
* More nested virtualization migration fixes (nSVM and eVMCS)
* Fix for KVM guest hibernation
* Fix for warning in SEV-ES SRCU usage
* Block KVM from loading on AMD machines with 5-level page tables,
due to the APM not mentioning how host CR4.LA57 exactly impacts
the guest.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCZWwgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOE9wgAk7Io8cuvnhC9ogVqzZWrPweWqFg8
fJcPMB584JRnMqYHBVYbkTPGe8SsCHKR2MKsNdc4cEP111cyr3suWsxOdmjJn58i
7ahy6PcKx7wWeWwEt7O599l6CeoX5XB9ExvA6eiXAv7iZeOJHFa+Ny2GlWgauy6Y
DELryEomx1r4IUkZaSR+2fYjzvOWTXQixwU/jwx8NcTJz0DrzknzLE7XOciPBfn0
t0Q2rCXdL2nF1uPksZbntx8Qoa6t6GDVIyrH/ZCPQYJtAX6cjxNAh3zwCe+hMnOd
fW8ntBH1nZRiNnberA4IICAzqnUokgPWdKBrZT2ntWHBK+aqxXHznrlPJA==
=e+gD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Lots of bug fixes.
- Fix virtualization of RDPID
- Virtualization of DR6_BUS_LOCK, which on bare metal is new to this
release
- More nested virtualization migration fixes (nSVM and eVMCS)
- Fix for KVM guest hibernation
- Fix for warning in SEV-ES SRCU usage
- Block KVM from loading on AMD machines with 5-level page tables, due
to the APM not mentioning how host CR4.LA57 exactly impacts the
guest.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (48 commits)
KVM: SVM: Move GHCB unmapping to fix RCU warning
KVM: SVM: Invert user pointer casting in SEV {en,de}crypt helpers
kvm: Cap halt polling at kvm->max_halt_poll_ns
tools/kvm_stat: Fix documentation typo
KVM: x86: Prevent deadlock against tk_core.seq
KVM: x86: Cancel pvclock_gtod_work on module removal
KVM: x86: Prevent KVM SVM from loading on kernels with 5-level paging
KVM: X86: Expose bus lock debug exception to guest
KVM: X86: Add support for the emulation of DR6_BUS_LOCK bit
KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
KVM: x86: Hide RDTSCP and RDPID if MSR_TSC_AUX probing failed
KVM: x86: Tie Intel and AMD behavior for MSR_TSC_AUX to guest CPU model
KVM: x86: Move uret MSR slot management to common x86
KVM: x86: Export the number of uret MSRs to vendor modules
KVM: VMX: Disable loading of TSX_CTRL MSR the more conventional way
KVM: VMX: Use common x86's uret MSR list as the one true list
KVM: VMX: Use flag to indicate "active" uret MSRs instead of sorting list
KVM: VMX: Configure list of user return MSRs at module init
KVM: x86: Add support for RDPID without RDTSCP
KVM: SVM: Probe and load MSR_TSC_AUX regardless of RDTSCP support in host
...
The SYSCFG MSR continued being updated beyond the K8 family; drop the K8
name from it.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20210427111636.1207-4-brijesh.singh@amd.com
The guest and the hypervisor contain separate macros to get and set
the GHCB MSR protocol and NAE event fields. Consolidate the GHCB
protocol definitions and helper macros in one place.
Leave the supported protocol version define in separate files to keep
the guest and hypervisor flexibility to support different GHCB version
in the same release.
There is no functional change intended.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20210427111636.1207-3-brijesh.singh@amd.com
When an SEV-ES guest is running, the GHCB is unmapped as part of the
vCPU run support. However, kvm_vcpu_unmap() triggers an RCU dereference
warning with CONFIG_PROVE_LOCKING=y because the SRCU lock is released
before invoking the vCPU run support.
Move the GHCB unmapping into the prepare_guest_switch callback, which is
invoked while still holding the SRCU lock, eliminating the RCU dereference
warning.
Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <b2f9b79d15166f2c3e4375c0d9bc3268b7696455.1620332081.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invert the user pointer params for SEV's helpers for encrypting and
decrypting guest memory so that they take a pointer and cast to an
unsigned long as necessary, as opposed to doing the opposite. Tagging a
non-pointer as __user is confusing and weird since a cast of some form
needs to occur to actually access the user data. This also fixes Sparse
warnings triggered by directly consuming the unsigned longs, which are
"noderef" due to the __user tag.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210506231542.2331138-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disallow loading KVM SVM if 5-level paging is supported. In theory, NPT
for L1 should simply work, but there unknowns with respect to how the
guest's MAXPHYADDR will be handled by hardware.
Nested NPT is more problematic, as running an L1 VMM that is using
2-level page tables requires stacking single-entry PDP and PML4 tables in
KVM's NPT for L2, as there are no equivalent entries in L1's NPT to
shadow. Barring hardware magic, for 5-level paging, KVM would need stack
another layer to handle PML5.
Opportunistically rename the lm_root pointer, which is used for the
aforementioned stacking when shadowing 2-level L1 NPT, to pml4_root to
call out that it's specifically for PML4.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210505204221.1934471-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Squish the Intel and AMD emulation of MSR_TSC_AUX together and tie it to
the guest CPU model instead of the host CPU behavior. While not strictly
necessary to avoid guest breakage, emulating cross-vendor "architecture"
will provide consistent behavior for the guest, e.g. WRMSR fault behavior
won't change if the vCPU is migrated to a host with divergent behavior.
Note, the "new" kvm_is_supported_user_return_msr() checks do not add new
functionality on either SVM or VMX. On SVM, the equivalent was
"tsc_aux_uret_slot < 0", and on VMX the check was buried in the
vmx_find_uret_msr() call at the find_uret_msr label.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that SVM and VMX both probe MSRs before "defining" user return slots
for them, consolidate the code for probe+define into common x86 and
eliminate the odd behavior of having the vendor code define the slot for
a given MSR.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow userspace to enable RDPID for a guest without also enabling RDTSCP.
Aside from checking for RDPID support in the obvious flows, VMX also needs
to set ENABLE_RDTSCP=1 when RDPID is exposed.
For the record, there is no known scenario where enabling RDPID without
RDTSCP is desirable. But, both AMD and Intel architectures allow for the
condition, i.e. this is purely to make KVM more architecturally accurate.
Fixes: 41cd02c6f7 ("kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID")
Cc: stable@vger.kernel.org
Reported-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Probe MSR_TSC_AUX whether or not RDTSCP is supported in the host, and
if probing succeeds, load the guest's MSR_TSC_AUX into hardware prior to
VMRUN. Because SVM doesn't support interception of RDPID, RDPID cannot
be disallowed in the guest (without resorting to binary translation).
Leaving the host's MSR_TSC_AUX in hardware would leak the host's value to
the guest if RDTSCP is not supported.
Note, there is also a kernel bug that prevents leaking the host's value.
The host kernel initializes MSR_TSC_AUX if and only if RDTSCP is
supported, even though the vDSO usage consumes MSR_TSC_AUX via RDPID.
I.e. if RDTSCP is not supported, there is no host value to leak. But,
if/when the host kernel bug is fixed, KVM would start leaking MSR_TSC_AUX
in the case where hardware supports RDPID but RDTSCP is unavailable for
whatever reason.
Probing MSR_TSC_AUX will also allow consolidating the probe and define
logic in common x86, and will make it simpler to condition the existence
of MSR_TSX_AUX (from the guest's perspective) on RDTSCP *or* RDPID.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intercept RDTSCP to inject #UD if RDTSC is disabled in the guest.
Note, SVM does not support intercepting RDPID. Unlike VMX's
ENABLE_RDTSCP control, RDTSCP interception does not apply to RDPID. This
is a benign virtualization hole as the host kernel (incorrectly) sets
MSR_TSC_AUX if RDTSCP is supported, and KVM loads the guest's MSR_TSC_AUX
into hardware if RDTSCP is supported in the host, i.e. KVM will not leak
the host's MSR_TSC_AUX to the guest.
But, when the kernel bug is fixed, KVM will start leaking the host's
MSR_TSC_AUX if RDPID is supported in hardware, but RDTSCP isn't available
for whatever reason. This leak will be remedied in a future commit.
Fixes: 46896c73c1 ("KVM: svm: add support for RDTSCP")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-4-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While in most cases, when returning to use the VMCB01,
the exit reason stored in it will be SVM_EXIT_VMRUN,
on first VM exit after a nested migration this field
can contain anything since the VM entry did happen
before the migration.
Remove this warning to avoid the false positive.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210504143936.1644378-3-mlevitsk@redhat.com>
Fixes: 9a7de6ecc3 ("KVM: nSVM: If VMRUN is single-stepped, queue the #DB intercept in nested_svm_vmexit()")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While usually the L1's GIF is set while L2 runs, and usually
migration nested state is loaded after a vCPU reset which
also sets L1's GIF to true, this is not guaranteed.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210504143936.1644378-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the enter/exit logic in {svm,vmx}_vcpu_enter_exit() to common
helpers. Opportunistically update the somewhat stale comment about the
updates needing to occur immediately after VM-Exit.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210505002735.1684165-9-seanjc@google.com
Defer the call to account guest time until after servicing any IRQ(s)
that happened in the guest or immediately after VM-Exit. Tick-based
accounting of vCPU time relies on PF_VCPU being set when the tick IRQ
handler runs, and IRQs are blocked throughout the main sequence of
vcpu_enter_guest(), including the call into vendor code to actually
enter and exit the guest.
This fixes a bug where reported guest time remains '0', even when
running an infinite loop in the guest:
https://bugzilla.kernel.org/show_bug.cgi?id=209831
Fixes: 87fa7f3e98 ("x86/kvm: Move context tracking where it belongs")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210505002735.1684165-4-seanjc@google.com
The fget can potentially return null, so the fput on the error return
path can cause a null pointer dereference. Fix this by checking for
a null source_kvm_file before doing a fput.
Addresses-Coverity: ("Dereference null return")
Fixes: 54526d1fd5 ("KVM: x86: Support KVM VMs sharing SEV context")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20210430170303.131924-1-colin.king@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows the KVM to load the nested state more than
once without warnings.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210503125446.1353307-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Define and use an invalid GPA (all ones) for init value of last
and current nested vmcb physical addresses.
* Reset the current vmcb12 gpa to the invalid value when leaving
the nested mode, similar to what is done on nested vmexit.
* Reset the last seen vmcb12 address when disabling the nested SVM,
as it relies on vmcb02 fields which are freed at that point.
Fixes: 4995a3685f ("KVM: SVM: Use a separate vmcb for the nested L2 guest")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210503125446.1353307-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When forcibly leaving the nested mode, we should switch to vmcb01
Fixes: 4995a3685f ("KVM: SVM: Use a separate vmcb for the nested L2 guest")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210503125446.1353307-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
Pull cgroup changes from Tejun Heo:
"The only notable change is Vipin's new misc cgroup controller.
This implements generic support for resources which can be controlled
by simply counting and limiting the number of resource instances - ie
there's X number of these on the system and this cgroup subtree can
have upto Y of those.
The first user is the address space IDs used for virtual machine
memory encryption and expected future usages are similar - niche
hardware features with concrete resource limits and simple usage
models"
* 'for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: use tsk->in_iowait instead of delayacct_is_task_waiting_on_io()
cgroup/cpuset: fix typos in comments
cgroup: misc: mark dummy misc_cg_res_total_usage() static inline
svm/sev: Register SEV and SEV-ES ASIDs to the misc controller
cgroup: Miscellaneous cgroup documentation.
cgroup: Add misc cgroup controller
-----BEGIN PGP SIGNATURE-----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=bO1i
-----END PGP SIGNATURE-----
Merge tag 'x86_cleanups_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 cleanups from Borislav Petkov:
"Trivial cleanups and fixes all over the place"
* tag 'x86_cleanups_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove me from IDE/ATAPI section
x86/pat: Do not compile stubbed functions when X86_PAT is off
x86/asm: Ensure asm/proto.h can be included stand-alone
x86/platform/intel/quark: Fix incorrect kernel-doc comment syntax in files
x86/msr: Make locally used functions static
x86/cacheinfo: Remove unneeded dead-store initialization
x86/process/64: Move cpu_current_top_of_stack out of TSS
tools/turbostat: Unmark non-kernel-doc comment
x86/syscalls: Fix -Wmissing-prototypes warnings from COND_SYSCALL()
x86/fpu/math-emu: Fix function cast warning
x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes
x86: Fix various typos in comments, take #2
x86: Remove unusual Unicode characters from comments
x86/kaslr: Return boolean values from a function returning bool
x86: Fix various typos in comments
x86/setup: Remove unused RESERVE_BRK_ARRAY()
stacktrace: Move documentation for arch_stack_walk_reliable() to header
x86: Remove duplicate TSC DEADLINE MSR definitions
Skip SEV's expensive WBINVD and DF_FLUSH if there are no SEV ASIDs
waiting to be reclaimed, e.g. if SEV was never used. This "fixes" an
issue where the DF_FLUSH fails during hardware teardown if the original
SEV_INIT failed. Ideally, SEV wouldn't be marked as enabled in KVM if
SEV_INIT fails, but that's a problem for another day.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the forward declaration of sev_flush_asids(), which is only a few
lines above the function itself.
No functional change intended.
Reviewed by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace calls to svm_sev_enabled() with direct checks on sev_enabled, or
in the case of svm_mem_enc_op, simply drop the call to svm_sev_enabled().
This effectively replaces checks against a valid max_sev_asid with checks
against sev_enabled. sev_enabled is forced off by sev_hardware_setup()
if max_sev_asid is invalid, all call sites are guaranteed to run after
sev_hardware_setup(), and all of the checks care about SEV being fully
enabled (as opposed to intentionally handling the scenario where
max_sev_asid is valid but SEV enabling fails due to OOM).
Reviewed by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the allocation of the SEV VMCB array to sev.c to help pave the way
toward encapsulating SEV enabling wholly within sev.c.
No functional change intended.
Reviewed by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Query max_sev_asid directly after setting it instead of bouncing through
its wrapper, svm_sev_enabled(). Using the wrapper is unnecessary
obfuscation.
No functional change intended.
Reviewed by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the redundant svm_sev_enabled() check when calling
sev_hardware_teardown(), the teardown helper itself does the check.
Removing the check from svm.c will eventually allow dropping
svm_sev_enabled() entirely.
No functional change intended.
Reviewed by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable the 'sev' and 'sev_es' module params by default instead of having
them conditioned on CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT. The extra
Kconfig is pointless as KVM SEV/SEV-ES support is already controlled via
CONFIG_KVM_AMD_SEV, and CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT has the
unfortunate side effect of enabling all the SEV-ES _guest_ code due to
it being dependent on CONFIG_AMD_MEM_ENCRYPT=y.
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define sev_enabled and sev_es_enabled as 'false' and explicitly #ifdef
out all of sev_hardware_setup() if CONFIG_KVM_AMD_SEV=n. This kills
three birds at once:
- Makes sev_enabled and sev_es_enabled off by default if
CONFIG_KVM_AMD_SEV=n. Previously, they could be on by default if
CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y, regardless of KVM SEV
support.
- Hides the sev and sev_es modules params when CONFIG_KVM_AMD_SEV=n.
- Resolves a false positive -Wnonnull in __sev_recycle_asids() that is
currently masked by the equivalent IS_ENABLED(CONFIG_KVM_AMD_SEV)
check in svm_sev_enabled(), which will be dropped in a future patch.
Reviewed by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename sev and sev_es to sev_enabled and sev_es_enabled respectively to
better align with other KVM terminology, and to avoid pseudo-shadowing
when the variables are moved to sev.c in a future patch ('sev' is often
used for local struct kvm_sev_info pointers.
No functional change intended.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a reverse-CPUID entry for the memory encryption word, 0x8000001F.EAX,
and use it to override the supported CPUID flags reported to userspace.
Masking the reported CPUID flags avoids over-reporting KVM support, e.g.
without the mask a SEV-SNP capable CPU may incorrectly advertise SNP
support to userspace.
Clear SEV/SEV-ES if their corresponding module parameters are disabled,
and clear the memory encryption leaf completely if SEV is not fully
supported in KVM. Advertise SME_COHERENT in addition to SEV and SEV-ES,
as the guest can use SME_COHERENT to avoid CLFLUSH operations.
Explicitly omit SME and VM_PAGE_FLUSH from the reporting. These features
are used by KVM, but are not exposed to the guest, e.g. guest access to
related MSRs will fault.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unconditionally invoke sev_hardware_setup() when configuring SVM and
handle clearing the module params/variable 'sev' and 'sev_es' in
sev_hardware_setup(). This allows making said variables static within
sev.c and reduces the odds of a collision with guest code, e.g. the guest
side of things has already laid claim to 'sev_enabled'.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable SEV and SEV-ES if NPT is disabled. While the APM doesn't clearly
state that NPT is mandatory, it's alluded to by:
The guest page tables, managed by the guest, may mark data memory pages
as either private or shared, thus allowing selected pages to be shared
outside the guest.
And practically speaking, shadow paging can't work since KVM can't read
the guest's page tables.
Fixes: e9df094289 ("KVM: SVM: Add sev module_param")
Cc: Brijesh Singh <brijesh.singh@amd.com
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free sev_asid_bitmap if the reclaim bitmap allocation fails, othwerise
KVM will unnecessarily keep the bitmap when SEV is not fully enabled.
Freeing the page is also necessary to avoid introducing a bug when a
future patch eliminates svm_sev_enabled() in favor of using the global
'sev' flag directly. While sev_hardware_enabled() checks max_sev_asid,
which is true even if KVM setup fails, 'sev' will be true if and only
if KVM setup fully succeeds.
Fixes: 33af3a7ef9 ("KVM: SVM: Reduce WBINVD/DF_FLUSH invocations")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zero out the array of VMCB pointers so that pre_sev_run() won't see
garbage when querying the array to detect when an SEV ASID is being
associated with a new VMCB. In practice, reading random values is all
but guaranteed to be benign as a false negative (which is extremely
unlikely on its own) can only happen on CPU0 on the first VMRUN and would
only cause KVM to skip the ASID flush. For anything bad to happen, a
previous instance of KVM would have to exit without flushing the ASID,
_and_ KVM would have to not flush the ASID at any time while building the
new SEV guest.
Cc: Borislav Petkov <bp@suse.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Fixes: 70cd94e60c ("KVM: SVM: VMRUN should use associated ASID when SEV is enabled")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Append raw to the direct variants of kvm_register_read/write(), and
drop the "l" from the mode-aware variants. I.e. make the mode-aware
variants the default, and make the direct variants scary sounding so as
to discourage use. Accessing the full 64-bit values irrespective of
mode is rarely the desired behavior.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop bits 63:32 of RAX when grabbing the address for INVLPGA emulation
outside of 64-bit mode to make KVM's emulation slightly less wrong. The
address for INVLPGA is determined by the effective address size, i.e.
it's not hardcoded to 64/32 bits for a given mode. Add a FIXME to call
out that the emulation is wrong.
Opportunistically tweak the ASID handling to make it clear that it's
defined by ECX, not rCX.
Per the APM:
The portion of rAX used to form the address is determined by the
effective address size (current execution mode and optional address
size prefix). The ASID is taken from ECX.
Fixes: ff092385e8 ("KVM: SVM: Implement INVLPGA")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop bits 63:32 on loads/stores to/from DRs and CRs when the vCPU is not
in 64-bit mode. The APM states bits 63:32 are dropped for both DRs and
CRs:
In 64-bit mode, the operand size is fixed at 64 bits without the need
for a REX prefix. In non-64-bit mode, the operand size is fixed at 32
bits and the upper 32 bits of the destination are forced to 0.
Fixes: 7ff76d58a9 ("KVM: SVM: enhance MOV CR intercept handler")
Fixes: cae3797a46 ("KVM: SVM: enhance mov DR intercept handler")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use KVM's "user return MSRs" framework to defer restoring the host's
MSR_TSC_AUX until the CPU returns to userspace. Add/improve comments to
clarify why MSR_TSC_AUX is intercepted on both RDMSR and WRMSR, and why
it's safe for KVM to keep the guest's value loaded even if KVM is
scheduled out.
Cc: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210423223404.3860547-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Force clear bits 63:32 of MSR_TSC_AUX on write to emulate current AMD
CPUs, which completely ignore the upper 32 bits, including dropping them
on write. Emulating AMD hardware will also allow migrating a vCPU from
AMD hardware to Intel hardware without requiring userspace to manually
clear the upper bits, which are reserved on Intel hardware.
Presumably, MSR_TSC_AUX[63:32] are intended to be reserved on AMD, but
sadly the APM doesn't say _anything_ about those bits in the context of
MSR access. The RDTSCP entry simply states that RCX contains bits 31:0
of the MSR, zero extended. And even worse is that the RDPID description
implies that it can consume all 64 bits of the MSR:
RDPID reads the value of TSC_AUX MSR used by the RDTSCP instruction
into the specified destination register. Normal operand size prefixes
do not apply and the update is either 32 bit or 64 bit based on the
current mode.
Emulate current hardware behavior to give KVM the best odds of playing
nice with whatever the behavior of future AMD CPUs happens to be.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210423223404.3860547-3-seanjc@google.com>
[Fix broken patch. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inject #GP on guest accesses to MSR_TSC_AUX if RDTSCP is unsupported in
the guest's CPUID model.
Fixes: 46896c73c1 ("KVM: svm: add support for RDTSCP")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210423223404.3860547-2-seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the local stack to "allocate" the structures used to communicate with
the PSP. The largest struct used by KVM, sev_data_launch_secret, clocks
in at 52 bytes, well within the realm of reasonable stack usage. The
smallest structs are a mere 4 bytes, i.e. the pointer for the allocation
is larger than the allocation itself.
Now that the PSP driver plays nice with vmalloc pointers, putting the
data on a virtually mapped stack (CONFIG_VMAP_STACK=y) will not cause
explosions.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406224952.4177376-9-seanjc@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
[Apply same treatment to PSP migration commands. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command finalize the guest receiving process and make the SEV guest
ready for the execution.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-Id: <d08914dc259644de94e29b51c3b68a13286fc5a3.1618498113.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command is used for copying the incoming buffer into the
SEV guest memory space.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-Id: <c5d0e3e719db7bb37ea85d79ed4db52e9da06257.1618498113.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command is used to create the encryption context for an incoming
SEV guest. The encryption context can be later used by the hypervisor
to import the incoming data into the SEV guest memory space.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-Id: <c7400111ed7458eee01007c4d8d57cdf2cbb0fc2.1618498113.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After completion of SEND_START, but before SEND_FINISH, the source VMM can
issue the SEND_CANCEL command to stop a migration. This is necessary so
that a cancelled migration can restart with a new target later.
Reviewed-by: Nathan Tempelman <natet@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Steve Rutherford <srutherford@google.com>
Message-Id: <20210412194408.2458827-1-srutherford@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command is used for encrypting the guest memory region using the encryption
context created with KVM_SEV_SEND_START.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by : Steve Rutherford <srutherford@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-Id: <d6a6ea740b0c668b30905ae31eac5ad7da048bb3.1618498113.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a capability for userspace to mirror SEV encryption context from
one vm to another. On our side, this is intended to support a
Migration Helper vCPU, but it can also be used generically to support
other in-guest workloads scheduled by the host. The intention is for
the primary guest and the mirror to have nearly identical memslots.
The primary benefits of this are that:
1) The VMs do not share KVM contexts (think APIC/MSRs/etc), so they
can't accidentally clobber each other.
2) The VMs can have different memory-views, which is necessary for post-copy
migration (the migration vCPUs on the target need to read and write to
pages, when the primary guest would VMEXIT).
This does not change the threat model for AMD SEV. Any memory involved
is still owned by the primary guest and its initial state is still
attested to through the normal SEV_LAUNCH_* flows. If userspace wanted
to circumvent SEV, they could achieve the same effect by simply attaching
a vCPU to the primary VM.
This patch deliberately leaves userspace in charge of the memslots for the
mirror, as it already has the power to mess with them in the primary guest.
This patch does not support SEV-ES (much less SNP), as it does not
handle handing off attested VMSAs to the mirror.
For additional context, we need a Migration Helper because SEV PSP
migration is far too slow for our live migration on its own. Using
an in-guest migrator lets us speed this up significantly.
Signed-off-by: Nathan Tempelman <natet@google.com>
Message-Id: <20210408223214.2582277-1-natet@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to section "Canonicalization and Consistency Checks" in APM vol 2,
the following guest state is illegal:
"The MSR or IOIO intercept tables extend to a physical address that
is greater than or equal to the maximum supported physical address."
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <20210412215611.110095-5-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define the actual size of the IOPM and MSRPM tables so that the actual size
can be used when initializing them and when checking the consistency of their
physical address.
These #defines are placed in svm.h so that they can be shared.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <20210412215611.110095-2-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly document why a vmcb must be marked dirty and assigned a new
asid when it will be run on a different cpu. The "what" is relatively
obvious, whereas the "why" requires reading the APM and/or KVM code.
Opportunistically remove a spurious period and several unnecessary
newlines in the comment.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406171811.4043363-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a comment above the declaration of vcpu_svm.vmcb to call out that it
is simply a shorthand for current_vmcb->ptr. The myriad accesses to
svm->vmcb are quite confusing without this crucial detail.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406171811.4043363-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove vmcb_pa from vcpu_svm and simply read current_vmcb->pa directly in
the one path where it is consumed. Unlike svm->vmcb, use of the current
vmcb's address is very limited, as evidenced by the fact that its use
can be trimmed to a single dereference.
Opportunistically add a comment about using vmcb01 for VMLOAD/VMSAVE, at
first glance using vmcb01 instead of vmcb_pa looks wrong.
No functional change intended.
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406171811.4043363-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not update the new vmcb's last-run cpu when switching to a different
vmcb. If the vCPU is migrated between its last run and a vmcb switch,
e.g. for nested VM-Exit, then setting the cpu without marking the vmcb
dirty will lead to KVM running the vCPU on a different physical cpu with
stale clean bit settings.
vcpu->cpu current_vmcb->cpu hardware
pre_svm_run() cpu0 cpu0 cpu0,clean
kvm_arch_vcpu_load() cpu1 cpu0 cpu0,clean
svm_switch_vmcb() cpu1 cpu1 cpu0,clean
pre_svm_run() cpu1 cpu1 kaboom
Simply delete the offending code; unlike VMX, which needs to update the
cpu at switch time due to the need to do VMPTRLD, SVM only cares about
which cpu last ran the vCPU.
Fixes: af18fa775d ("KVM: nSVM: Track the physical cpu of the vmcb vmrun through the vmcb")
Cc: Cathy Avery <cavery@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406171811.4043363-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Access to the GHCB is mainly in the VMGEXIT path and it is known that the
GHCB will be mapped. But there are two paths where it is possible the GHCB
might not be mapped.
The sev_vcpu_deliver_sipi_vector() routine will update the GHCB to inform
the caller of the AP Reset Hold NAE event that a SIPI has been delivered.
However, if a SIPI is performed without a corresponding AP Reset Hold,
then the GHCB might not be mapped (depending on the previous VMEXIT),
which will result in a NULL pointer dereference.
The svm_complete_emulated_msr() routine will update the GHCB to inform
the caller of a RDMSR/WRMSR operation about any errors. While it is likely
that the GHCB will be mapped in this situation, add a safe guard
in this path to be certain a NULL pointer dereference is not encountered.
Fixes: f1c6366e30 ("KVM: SVM: Add required changes to support intercepts under SEV-ES")
Fixes: 647daca25d ("KVM: SVM: Add support for booting APs in an SEV-ES guest")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Message-Id: <a5d3ebb600a91170fc88599d5a575452b3e31036.1617979121.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Injected interrupts/nmi should not block a pending exception,
but rather be either lost if nested hypervisor doesn't
intercept the pending exception (as in stock x86), or be delivered
in exitintinfo/IDT_VECTORING_INFO field, as a part of a VMexit
that corresponds to the pending exception.
The only reason for an exception to be blocked is when nested run
is pending (and that can't really happen currently
but still worth checking for).
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210401143817.1030695-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While KVM's MMU should be fully reset by loading of nested CR0/CR3/CR4
by KVM_SET_SREGS, we are not in nested mode yet when we do it and therefore
only root_mmu is reset.
On regular nested entries we call nested_svm_load_cr3 which both updates
the guest's CR3 in the MMU when it is needed, and it also initializes
the mmu again which makes it initialize the walk_mmu as well when nested
paging is enabled in both host and guest.
Since we don't call nested_svm_load_cr3 on nested state load,
the walk_mmu can be left uninitialized, which can lead to a NULL pointer
dereference while accessing it if we happen to get a nested page fault
right after entering the nested guest first time after the migration and
we decide to emulate it, which leads to the emulator trying to access
walk_mmu->gva_to_gpa which is NULL.
Therefore we should call this function on nested state load as well.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210401141814.1029036-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently to support Intel->AMD migration, if CPU vendor is GenuineIntel,
we emulate the full 64 value for MSR_IA32_SYSENTER_{EIP|ESP}
msrs, and we also emulate the sysenter/sysexit instruction in long mode.
(Emulator does still refuse to emulate sysenter in 64 bit mode, on the
ground that the code for that wasn't tested and likely has no users)
However when virtual vmload/vmsave is enabled, the vmload instruction will
update these 32 bit msrs without triggering their msr intercept,
which will lead to having stale values in kvm's shadow copy of these msrs,
which relies on the intercept to be up to date.
Fix/optimize this by doing the following:
1. Enable the MSR intercepts for SYSENTER MSRs iff vendor=GenuineIntel
(This is both a tiny optimization and also ensures that in case
the guest cpu vendor is AMD, the msrs will be 32 bit wide as
AMD defined).
2. Store only high 32 bit part of these msrs on interception and combine
it with hardware msr value on intercepted read/writes
iff vendor=GenuineIntel.
3. Disable vmload/vmsave virtualization if vendor=GenuineIntel.
(It is somewhat insane to set vendor=GenuineIntel and still enable
SVM for the guest but well whatever).
Then zero the high 32 bit parts when kvm intercepts and emulates vmload.
Thanks a lot to Paulo Bonzini for helping me with fixing this in the most
correct way.
This patch fixes nested migration of 32 bit nested guests, that was
broken because incorrect cached values of SYSENTER msrs were stored in
the migration stream if L1 changed these msrs with
vmload prior to L2 entry.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210401111928.996871-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switch to GFP_KERNEL_ACCOUNT for a handful of allocations that are
clearly associated with a single task/VM.
Note, there are a several SEV allocations that aren't accounted, but
those can (hopefully) be fixed by using the local stack for memory.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331023025.2485960-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reject KVM_SEV_INIT and KVM_SEV_ES_INIT if they are attempted after one
or more vCPUs have been created. KVM assumes a VM is tagged SEV/SEV-ES
prior to vCPU creation, e.g. init_vmcb() needs to mark the VMCB as SEV
enabled, and svm_create_vcpu() needs to allocate the VMSA. At best,
creating vCPUs before SEV/SEV-ES init will lead to unexpected errors
and/or behavior, and at worst it will crash the host, e.g.
sev_launch_update_vmsa() will dereference a null svm->vmsa pointer.
Fixes: 1654efcbc4 ("KVM: SVM: Add KVM_SEV_INIT command")
Fixes: ad73109ae7 ("KVM: SVM: Provide support to launch and run an SEV-ES guest")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331031936.2495277-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set sev->es_active only after the guts of KVM_SEV_ES_INIT succeeds. If
the command fails, e.g. because SEV is already active or there are no
available ASIDs, then es_active will be left set even though the VM is
not fully SEV-ES capable.
Refactor the code so that "es_active" is passed on the stack instead of
being prematurely shoved into sev_info, both to avoid having to unwind
sev_info and so that it's more obvious what actually consumes es_active
in sev_guest_init() and its helpers.
Fixes: ad73109ae7 ("KVM: SVM: Provide support to launch and run an SEV-ES guest")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331031936.2495277-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting
VMSAs for SEV, which effectively switches to use online_vcpus instead of
created_vcpus. This fixes a possible null-pointer dereference as
created_vcpus does not guarantee a vCPU exists, since it is updated at
the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the
bulk of vCPU creation to run in parallel, while still correctly
restricting the max number of max vCPUs.
Fixes: ad73109ae7 ("KVM: SVM: Provide support to launch and run an SEV-ES guest")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331031936.2495277-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to APM, the #DB intercept for a single-stepped VMRUN must happen
after the completion of that instruction, when the guest does #VMEXIT to
the host. However, in the current implementation of KVM, the #DB intercept
for a single-stepped VMRUN happens after the completion of the instruction
that follows the VMRUN instruction. When the #DB intercept handler is
invoked, it shows the RIP of the instruction that follows VMRUN, instead of
of VMRUN itself. This is an incorrect RIP as far as single-stepping VMRUN
is concerned.
This patch fixes the problem by checking, in nested_svm_vmexit(), for the
condition that the VMRUN instruction is being single-stepped and if so,
queues the pending #DB intercept so that the #DB is accounted for before
we execute L1's next instruction.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oraacle.com>
Message-Id: <20210323175006.73249-2-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Secure Encrypted Virtualization (SEV) and Secure Encrypted
Virtualization - Encrypted State (SEV-ES) ASIDs are used to encrypt KVMs
on AMD platform. These ASIDs are available in the limited quantities on
a host.
Register their capacity and usage to the misc controller for tracking
via cgroups.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: David Rientjes <rientjes@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixing nested_vmcb_check_save to avoid all TOC/TOU races
is a bit harder in released kernels, so do the bare minimum
by avoiding that EFER.SVME is cleared. This is problematic
because svm_set_efer frees the data structures for nested
virtualization if EFER.SVME is cleared.
Also check that EFER.SVME remains set after a nested vmexit;
clearing it could happen if the bit is zero in the save area
that is passed to KVM_SET_NESTED_STATE (the save area of the
nested state corresponds to the nested hypervisor's state
and is restored on the next nested vmexit).
Cc: stable@vger.kernel.org
Fixes: 2fcf4876ad ("KVM: nSVM: implement on demand allocation of the nested state")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid races between check and use of the nested VMCB controls. This
for example ensures that the VMRUN intercept is always reflected to the
nested hypervisor, instead of being processed by the host. Without this
patch, it is possible to end up with svm->nested.hsave pointing to
the MSR permission bitmap for nested guests.
This bug is CVE-2021-29657.
Reported-by: Felix Wilhelm <fwilhelm@google.com>
Cc: stable@vger.kernel.org
Fixes: 2fcf4876ad ("KVM: nSVM: implement on demand allocation of the nested state")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSR_F15H_PERF_CTL0-5, MSR_F15H_PERF_CTR0-5 MSRs are only available when
X86_FEATURE_PERFCTR_CORE CPUID bit was exposed to the guest. KVM, however,
allows these MSRs unconditionally because kvm_pmu_is_valid_msr() ->
amd_msr_idx_to_pmc() check always passes and because kvm_pmu_set_msr() ->
amd_pmu_set_msr() doesn't fail.
In case of a counter (CTRn), no big harm is done as we only increase
internal PMC's value but in case of an eventsel (CTLn), we go deep into
perf internals with a non-existing counter.
Note, kvm_get_msr_common() just returns '0' when these MSRs don't exist
and this also seems to contradict architectural behavior which is #GP
(I did check one old Opteron host) but changing this status quo is a bit
scarier.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210323084515.1346540-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix another ~42 single-word typos in arch/x86/ code comments,
missed a few in the first pass, in particular in .S files.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-kernel@vger.kernel.org
Fix ~144 single-word typos in arch/x86/ code comments.
Doing this in a single commit should reduce the churn.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-kernel@vger.kernel.org
Set the PAE roots used as decrypted to play nice with SME when KVM is
using shadow paging. Explicitly skip setting the C-bit when loading
CR3 for PAE shadow paging, even though it's completely ignored by the
CPU. The extra documentation is nice to have.
Note, there are several subtleties at play with NPT. In addition to
legacy shadow paging, the PAE roots are used for SVM's NPT when either
KVM is 32-bit (uses PAE paging) or KVM is 64-bit and shadowing 32-bit
NPT. However, 32-bit Linux, and thus KVM, doesn't support SME. And
64-bit KVM can happily set the C-bit in CR3. This also means that
keeping __sme_set(root) for 32-bit KVM when NPT is enabled is
conceptually wrong, but functionally ok since SME is 64-bit only.
Leave it as is to avoid unnecessary pollution.
Fixes: d0ec49d4de ("kvm/x86/svm: Support Secure Memory Encryption within KVM")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210309224207.1218275-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Retrieve the active PCID only when writing a guest CR3 value, i.e. don't
get the PCID when using EPT or NPT. The PCID is especially problematic
for EPT as the bits have different meaning, and so the PCID and must be
manually stripped, which is annoying and unnecessary. And on VMX,
getting the active PCID also involves reading the guest's CR3 and
CR4.PCIDE, i.e. may add pointless VMREADs.
Opportunistically rename the pgd/pgd_level params to root_hpa and
root_level to better reflect their new roles. Keep the function names,
as "load the guest PGD" is still accurate/correct.
Last, and probably least, pass root_hpa as a hpa_t/u64 instead of an
unsigned long. The EPTP holds a 64-bit value, even in 32-bit mode, so
in theory EPT could support HIGHMEM for 32-bit KVM. Never mind that
doing so would require changing the MMU page allocators and reworking
the MMU to use kmap().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305183123.3978098-2-seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid jump by moving exception fixups out of line.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20210226125621.111723-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop tagging MMIO SPTEs with specific available bits and instead detect
MMIO SPTEs by checking for their unique SPTE value. The value is
guaranteed to be unique on shadow paging and NPT as setting reserved
physical address bits on any other type of SPTE would consistute a KVM
bug. Ditto for EPT, as creating a WX non-MMIO would also be a bug.
Note, this approach is also future-compatibile with TDX, which will need
to reflect MMIO EPT violations as #VEs into the guest. To create an EPT
violation instead of a misconfig, TDX EPTs will need to have RWX=0, But,
MMIO SPTEs will also be the only case where KVM clears SUPPRESS_VE, so
MMIO SPTEs will still be guaranteed to have a unique value within a given
MMU context.
The main motivation is to make it easier to reason about which types of
SPTEs use which available bits. As a happy side effect, this frees up
two more bits for storing the MMIO generation.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210225204749.1512652-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the vmcb12 control clean field to determine which vmcb12.save
registers were marked dirty in order to minimize register copies
when switching from L1 to L2. Those vmcb12 registers marked as dirty need
to be copied to L0's vmcb02 as they will be used to update the vmcb
state cache for the L2 VMRUN. In the case where we have a different
vmcb12 from the last L2 VMRUN all vmcb12.save registers must be
copied over to L2.save.
Tested:
kvm-unit-tests
kvm selftests
Fedora L1 L2
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cathy Avery <cavery@redhat.com>
Message-Id: <20210301200844.2000-1-cavery@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Newer AMD processors have a feature to virtualize the use of the
SPEC_CTRL MSR. Presence of this feature is indicated via CPUID
function 0x8000000A_EDX[20]: GuestSpecCtrl. Hypervisors are not
required to enable this feature since it is automatically enabled on
processors that support it.
A hypervisor may wish to impose speculation controls on guest
execution or a guest may want to impose its own speculation controls.
Therefore, the processor implements both host and guest
versions of SPEC_CTRL.
When in host mode, the host SPEC_CTRL value is in effect and writes
update only the host version of SPEC_CTRL. On a VMRUN, the processor
loads the guest version of SPEC_CTRL from the VMCB. When the guest
writes SPEC_CTRL, only the guest version is updated. On a VMEXIT,
the guest version is saved into the VMCB and the processor returns
to only using the host SPEC_CTRL for speculation control. The guest
SPEC_CTRL is located at offset 0x2E0 in the VMCB.
The effective SPEC_CTRL setting is the guest SPEC_CTRL setting or'ed
with the hypervisor SPEC_CTRL setting. This allows the hypervisor to
ensure a minimum SPEC_CTRL if desired.
This support also fixes an issue where a guest may sometimes see an
inconsistent value for the SPEC_CTRL MSR on processors that support
this feature. With the current SPEC_CTRL support, the first write to
SPEC_CTRL is intercepted and the virtualized version of the SPEC_CTRL
MSR is not updated. When the guest reads back the SPEC_CTRL MSR, it
will be 0x0, instead of the actual expected value. There isn’t a
security concern here, because the host SPEC_CTRL value is or’ed with
the Guest SPEC_CTRL value to generate the effective SPEC_CTRL value.
KVM writes with the guest's virtualized SPEC_CTRL value to SPEC_CTRL
MSR just before the VMRUN, so it will always have the actual value
even though it doesn’t appear that way in the guest. The guest will
only see the proper value for the SPEC_CTRL register if the guest was
to write to the SPEC_CTRL register again. With Virtual SPEC_CTRL
support, the save area spec_ctrl is properly saved and restored.
So, the guest will always see the proper value when it is read back.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <161188100955.28787.11816849358413330720.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows to avoid copying of these fields between vmcb01
and vmcb02 on nested guest entry/exit.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thanks to the new macros that handle exception handling for SVM
instructions, it is easier to just do the VMLOAD/VMSAVE in C.
This is safe, as shown by the fact that the host reload is
already done outside the assembly source.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip PAUSE after interception to avoid unnecessarily re-executing the
instruction in the guest, e.g. after regaining control post-yield.
This is a benign bug as KVM disables PAUSE interception if filtering is
off, including the case where pause_filter_count is set to zero.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210205005750.3841462-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove bizarre code that causes KVM to run RDPMC through the emulator
when nrips is disabled. Accelerated emulation of RDPMC doesn't rely on
any additional data from the VMCB, and SVM has generic handling for
updating RIP to skip instructions when nrips is disabled.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210205005750.3841462-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the entirety of the accelerated RDPMC emulation to x86.c, and assign
the common handler directly to the exit handler array for VMX. SVM has
bizarre nrips behavior that prevents it from directly invoking the common
handler. The nrips goofiness will be addressed in a future patch.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210205005750.3841462-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the trivial exit handlers, e.g. for instructions that KVM
"emulates" as nops, to common x86 code. Assign the common handlers
directly to the exit handler arrays and drop the vendor trampolines.
Opportunistically use pr_warn_once() where appropriate.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210205005750.3841462-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
