mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2025-11-27 00:43:16 +00:00
b9a0da5b2e
106 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Xu Kuohai
|
aada476655 |
bpf, arm64: Fix bpf trampoline instruction endianness
The sparse tool complains as follows:
arch/arm64/net/bpf_jit_comp.c:1684:16:
warning: incorrect type in assignment (different base types)
arch/arm64/net/bpf_jit_comp.c:1684:16:
expected unsigned int [usertype] *branch
arch/arm64/net/bpf_jit_comp.c:1684:16:
got restricted __le32 [usertype] *
arch/arm64/net/bpf_jit_comp.c:1700:52:
error: subtraction of different types can't work (different base
types)
arch/arm64/net/bpf_jit_comp.c:1734:29:
warning: incorrect type in assignment (different base types)
arch/arm64/net/bpf_jit_comp.c:1734:29:
expected unsigned int [usertype] *
arch/arm64/net/bpf_jit_comp.c:1734:29:
got restricted __le32 [usertype] *
arch/arm64/net/bpf_jit_comp.c:1918:52:
error: subtraction of different types can't work (different base
types)
This is because the variable branch in function invoke_bpf_prog and the
variable branches in function prepare_trampoline are defined as type
u32 *, which conflicts with ctx->image's type __le32 *, so sparse complains
when assignment or arithmetic operation are performed on these two
variables and ctx->image.
Since arm64 instructions are always little-endian, change the type of
these two variables to __le32 * and call cpu_to_le32() to convert
instruction to little-endian before writing it to memory. This is also
in line with emit() which internally does cpu_to_le32(), too.
Fixes:
|
||
|
Aijun Sun
|
19f68ed6dc |
bpf, arm64: Allocate program buffer using kvcalloc instead of kcalloc
It is not necessary to allocate contiguous physical memory for BPF program buffer using kcalloc. When the BPF program is large more than memory page size, kcalloc allocates multiple memory pages from buddy system. If the device can not provide sufficient memory, for example in low-end android devices [0], memory allocation for BPF program is likely to fail. Test cases in lib/test_bpf.c all pass on ARM64 QEMU. [0] AndroidTestSuit: page allocation failure: order:4, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=foreground,mems_allowed=0 Call trace: dump_stack+0xa4/0x114 warn_alloc+0xf8/0x14c __alloc_pages_slowpath+0xac8/0xb14 __alloc_pages_nodemask+0x194/0x3d0 kmalloc_order_trace+0x44/0x1e8 __kmalloc+0x29c/0x66c bpf_int_jit_compile+0x17c/0x568 bpf_prog_select_runtime+0x4c/0x1b0 bpf_prepare_filter+0x5fc/0x6bc bpf_prog_create_from_user+0x118/0x1c0 seccomp_set_mode_filter+0x1c4/0x7cc __do_sys_prctl+0x380/0x1424 __arm64_sys_prctl+0x20/0x2c el0_svc_common+0xc8/0x22c el0_svc_handler+0x1c/0x28 el0_svc+0x8/0x100 Signed-off-by: Aijun Sun <aijun.sun@unisoc.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220804025442.22524-1-aijun.sun@unisoc.com |
||
|
Xu Kuohai
|
339ed900b3 |
bpf, arm64: Fix compile error in dummy_tramp()
dummy_tramp() uses "lr" to refer to the x30 register, but some assembler
does not recognize "lr" and reports a build failure:
/tmp/cc52xO0c.s: Assembler messages:
/tmp/cc52xO0c.s:8: Error: operand 1 should be an integer register -- `mov lr,x9'
/tmp/cc52xO0c.s:7: Error: undefined symbol lr used as an immediate value
make[2]: *** [scripts/Makefile.build:250: arch/arm64/net/bpf_jit_comp.o] Error 1
make[1]: *** [scripts/Makefile.build:525: arch/arm64/net] Error 2
So replace "lr" with "x30" to fix it.
Fixes:
|
||
|
Nathan Chancellor
|
33f32e5072 |
bpf, arm64: Mark dummy_tramp as global
When building with clang + CONFIG_CFI_CLANG=y, the following error
occurs at link time:
ld.lld: error: undefined symbol: dummy_tramp
dummy_tramp is declared globally in C but its definition in inline
assembly does not use .global, which prevents clang from properly
resolving the references to it when creating the CFI jump tables.
Mark dummy_tramp as global so that the reference can be properly
resolved.
Fixes:
|
||
|
Xu Kuohai
|
efc9909fdc |
bpf, arm64: Add bpf trampoline for arm64
This is arm64 version of commit
|
||
|
Xu Kuohai
|
b2ad54e153 |
bpf, arm64: Implement bpf_arch_text_poke() for arm64
Implement bpf_arch_text_poke() for arm64, so bpf prog or bpf trampoline
can be patched with it.
When the target address is NULL, the original instruction is patched to
a NOP.
When the target address and the source address are within the branch
range, the original instruction is patched to a bl instruction to the
target address directly.
To support attaching bpf trampoline to both regular kernel function and
bpf prog, we follow the ftrace patchsite way for bpf prog. That is, two
instructions are inserted at the beginning of bpf prog, the first one
saves the return address to x9, and the second is a nop which will be
patched to a bl instruction when a bpf trampoline is attached.
However, when a bpf trampoline is attached to bpf prog, the distance
between target address and source address may exceed 128MB, the maximum
branch range, because bpf trampoline and bpf prog are allocated
separately with vmalloc. So long jump should be handled.
When a bpf prog is constructed, a plt pointing to empty trampoline
dummy_tramp is placed at the end:
bpf_prog:
mov x9, lr
nop // patchsite
...
ret
plt:
ldr x10, target
br x10
target:
.quad dummy_tramp // plt target
This is also the state when no trampoline is attached.
When a short-jump bpf trampoline is attached, the patchsite is patched to
a bl instruction to the trampoline directly:
bpf_prog:
mov x9, lr
bl <short-jump bpf trampoline address> // patchsite
...
ret
plt:
ldr x10, target
br x10
target:
.quad dummy_tramp // plt target
When a long-jump bpf trampoline is attached, the plt target is filled with
the trampoline address and the patchsite is patched to a bl instruction to
the plt:
bpf_prog:
mov x9, lr
bl plt // patchsite
...
ret
plt:
ldr x10, target
br x10
target:
.quad <long-jump bpf trampoline address>
dummy_tramp is used to prevent another CPU from jumping to an unknown
location during the patching process, making the patching process easier.
The patching process is as follows:
1. when neither the old address or the new address is a long jump, the
patchsite is replaced with a bl to the new address, or nop if the new
address is NULL;
2. when the old address is not long jump but the new one is, the
branch target address is written to plt first, then the patchsite
is replaced with a bl instruction to the plt;
3. when the old address is long jump but the new one is not, the address
of dummy_tramp is written to plt first, then the patchsite is replaced
with a bl to the new address, or a nop if the new address is NULL;
4. when both the old address and the new address are long jump, the
new address is written to plt and the patchsite is not changed.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220711150823.2128542-4-xukuohai@huawei.com
|
||
|
Jakub Sitnicki
|
d4609a5d8c |
bpf, arm64: Keep tail call count across bpf2bpf calls
Today doing a BPF tail call after a BPF to BPF call, that is from a subprogram, is allowed only by the x86-64 BPF JIT. Mixing these features requires support from JIT. Tail call count has to be tracked through BPF to BPF calls, as well as through BPF tail calls to prevent unbounded chains of tail calls. arm64 BPF JIT stores the tail call count (TCC) in a dedicated register (X26). This makes it easier to support bpf2bpf calls mixed with tail calls than on x86 platform. In order to keep the tail call count in tact throughout bpf2bpf calls, all we need to do is tweak the program prologue generator. When emitting prologue for a subprogram, we skip the block that initializes the tail call count and emits a jump pad for the tail call. With this change, a sample execution flow where a bpf2bpf call is followed by a tail call would look like so: int entry(struct __sk_buff *skb): 0xffffffc0090151d4: paciasp 0xffffffc0090151d8: stp x29, x30, [sp, #-16]! 0xffffffc0090151dc: mov x29, sp 0xffffffc0090151e0: stp x19, x20, [sp, #-16]! 0xffffffc0090151e4: stp x21, x22, [sp, #-16]! 0xffffffc0090151e8: stp x25, x26, [sp, #-16]! 0xffffffc0090151ec: stp x27, x28, [sp, #-16]! 0xffffffc0090151f0: mov x25, sp 0xffffffc0090151f4: mov x26, #0x0 // <- init TCC only 0xffffffc0090151f8: bti j // in main prog 0xffffffc0090151fc: sub x27, x25, #0x0 0xffffffc009015200: sub sp, sp, #0x10 0xffffffc009015204: mov w1, #0x0 0xffffffc009015208: mov x10, #0xffffffffffffffff 0xffffffc00901520c: strb w1, [x25, x10] 0xffffffc009015210: mov x10, #0xffffffffffffd25c 0xffffffc009015214: movk x10, #0x902, lsl #16 0xffffffc009015218: movk x10, #0xffc0, lsl #32 0xffffffc00901521c: blr x10 -------------------. // bpf2bpf call 0xffffffc009015220: add x7, x0, #0x0 <-------------. 0xffffffc009015224: add sp, sp, #0x10 | | 0xffffffc009015228: ldp x27, x28, [sp], #16 | | 0xffffffc00901522c: ldp x25, x26, [sp], #16 | | 0xffffffc009015230: ldp x21, x22, [sp], #16 | | 0xffffffc009015234: ldp x19, x20, [sp], #16 | | 0xffffffc009015238: ldp x29, x30, [sp], #16 | | 0xffffffc00901523c: add x0, x7, #0x0 | | 0xffffffc009015240: autiasp | | 0xffffffc009015244: ret | | | | int subprog_tail(struct __sk_buff *skb): | | 0xffffffc00902d25c: paciasp <----------------------' | 0xffffffc00902d260: stp x29, x30, [sp, #-16]! | 0xffffffc00902d264: mov x29, sp | 0xffffffc00902d268: stp x19, x20, [sp, #-16]! | 0xffffffc00902d26c: stp x21, x22, [sp, #-16]! | 0xffffffc00902d270: stp x25, x26, [sp, #-16]! | 0xffffffc00902d274: stp x27, x28, [sp, #-16]! | 0xffffffc00902d278: mov x25, sp | 0xffffffc00902d27c: sub x27, x25, #0x0 | 0xffffffc00902d280: sub sp, sp, #0x10 | // <- end of prologue, notice: 0xffffffc00902d284: add x19, x0, #0x0 | // 1) TCC not touched, and 0xffffffc00902d288: mov w0, #0x1 | // 2) no tail call jump pad 0xffffffc00902d28c: mov x10, #0xfffffffffffffffc | 0xffffffc00902d290: str w0, [x25, x10] | 0xffffffc00902d294: mov x20, #0xffffff80ffffffff | 0xffffffc00902d298: movk x20, #0xc033, lsl #16 | 0xffffffc00902d29c: movk x20, #0x4e00 | 0xffffffc00902d2a0: add x0, x19, #0x0 | 0xffffffc00902d2a4: add x1, x20, #0x0 | 0xffffffc00902d2a8: mov x2, #0x0 | 0xffffffc00902d2ac: mov w10, #0x24 | 0xffffffc00902d2b0: ldr w10, [x1, x10] | 0xffffffc00902d2b4: add w2, w2, #0x0 | 0xffffffc00902d2b8: cmp w2, w10 | 0xffffffc00902d2bc: b.cs 0xffffffc00902d2f8 | 0xffffffc00902d2c0: mov w10, #0x21 | 0xffffffc00902d2c4: cmp x26, x10 | // TCC >= MAX_TAIL_CALL_CNT? 0xffffffc00902d2c8: b.cs 0xffffffc00902d2f8 | 0xffffffc00902d2cc: add x26, x26, #0x1 | // TCC++ 0xffffffc00902d2d0: mov w10, #0x110 | 0xffffffc00902d2d4: add x10, x1, x10 | 0xffffffc00902d2d8: lsl x11, x2, #3 | 0xffffffc00902d2dc: ldr x11, [x10, x11] | 0xffffffc00902d2e0: cbz x11, 0xffffffc00902d2f8 | 0xffffffc00902d2e4: mov w10, #0x30 | 0xffffffc00902d2e8: ldr x10, [x11, x10] | 0xffffffc00902d2ec: add x10, x10, #0x24 | 0xffffffc00902d2f0: add sp, sp, #0x10 | // <- destroy just current 0xffffffc00902d2f4: br x10 ---------------------. | // BPF stack frame 0xffffffc00902d2f8: mov x10, #0xfffffffffffffffc | | // before the tail call 0xffffffc00902d2fc: ldr w7, [x25, x10] | | 0xffffffc00902d300: add sp, sp, #0x10 | | 0xffffffc00902d304: ldp x27, x28, [sp], #16 | | 0xffffffc00902d308: ldp x25, x26, [sp], #16 | | 0xffffffc00902d30c: ldp x21, x22, [sp], #16 | | 0xffffffc00902d310: ldp x19, x20, [sp], #16 | | 0xffffffc00902d314: ldp x29, x30, [sp], #16 | | 0xffffffc00902d318: add x0, x7, #0x0 | | 0xffffffc00902d31c: autiasp | | 0xffffffc00902d320: ret | | | | int classifier_0(struct __sk_buff *skb): | | 0xffffffc008ff5874: paciasp | | 0xffffffc008ff5878: stp x29, x30, [sp, #-16]! | | 0xffffffc008ff587c: mov x29, sp | | 0xffffffc008ff5880: stp x19, x20, [sp, #-16]! | | 0xffffffc008ff5884: stp x21, x22, [sp, #-16]! | | 0xffffffc008ff5888: stp x25, x26, [sp, #-16]! | | 0xffffffc008ff588c: stp x27, x28, [sp, #-16]! | | 0xffffffc008ff5890: mov x25, sp | | 0xffffffc008ff5894: mov x26, #0x0 | | 0xffffffc008ff5898: bti j <----------------------' | 0xffffffc008ff589c: sub x27, x25, #0x0 | 0xffffffc008ff58a0: sub sp, sp, #0x0 | 0xffffffc008ff58a4: mov x0, #0xffffffc0ffffffff | 0xffffffc008ff58a8: movk x0, #0x8fc, lsl #16 | 0xffffffc008ff58ac: movk x0, #0x6000 | 0xffffffc008ff58b0: mov w1, #0x1 | 0xffffffc008ff58b4: str w1, [x0] | 0xffffffc008ff58b8: mov w7, #0x0 | 0xffffffc008ff58bc: mov sp, sp | 0xffffffc008ff58c0: ldp x27, x28, [sp], #16 | 0xffffffc008ff58c4: ldp x25, x26, [sp], #16 | 0xffffffc008ff58c8: ldp x21, x22, [sp], #16 | 0xffffffc008ff58cc: ldp x19, x20, [sp], #16 | 0xffffffc008ff58d0: ldp x29, x30, [sp], #16 | 0xffffffc008ff58d4: add x0, x7, #0x0 | 0xffffffc008ff58d8: autiasp | 0xffffffc008ff58dc: ret -------------------------------' Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220617105735.733938-3-jakub@cloudflare.com |
||
|
Eric Dumazet
|
10f3b29c65 |
bpf, arm64: Clear prog->jited_len along prog->jited
syzbot reported an illegal copy_to_user() attempt from bpf_prog_get_info_by_fd() [1] There was no repro yet on this bug, but I think that commit |
||
|
Xu Kuohai
|
042152c27c |
bpf, arm64: Sign return address for JITed code
Sign return address for JITed code when the kernel is built with pointer authentication enabled: 1. Sign LR with paciasp instruction before LR is pushed to stack. Since paciasp acts like landing pads for function entry, no need to insert bti instruction before paciasp. 2. Authenticate LR with autiasp instruction after LR is popped from stack. For BPF tail call, the stack frame constructed by the caller is reused by the callee. That is, the stack frame is constructed by the caller and destructed by the callee. Thus LR is signed and pushed to the stack in the caller's prologue, and poped from the stack and authenticated in the callee's epilogue. For BPF2BPF call, the caller and callee construct their own stack frames, and sign and authenticate their own LRs. Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://events.static.linuxfound.org/sites/events/files/slides/slides_23.pdf Link: https://lore.kernel.org/bpf/20220402073942.3782529-1-xukuohai@huawei.com |
||
|
Xu Kuohai
|
5b3d19b9bd |
bpf, arm64: Adjust the offset of str/ldr(immediate) to positive number
The BPF STX/LDX instruction uses offset relative to the FP to address
stack space. Since the BPF_FP locates at the top of the frame, the offset
is usually a negative number. However, arm64 str/ldr immediate instruction
requires that offset be a positive number. Therefore, this patch tries to
convert the offsets.
The method is to find the negative offset furthest from the FP firstly.
Then add it to the FP, calculate a bottom position, called FPB, and then
adjust the offsets in other STR/LDX instructions relative to FPB.
FPB is saved using the callee-saved register x27 of arm64 which is not
used yet.
Before adjusting the offset, the patch checks every instruction to ensure
that the FP does not change in run-time. If the FP may change, no offset
is adjusted.
For example, for the following bpftrace command:
bpftrace -e 'kprobe:do_sys_open { printf("opening: %s\n", str(arg1)); }'
Without this patch, jited code(fragment):
0: bti c
4: stp x29, x30, [sp, #-16]!
8: mov x29, sp
c: stp x19, x20, [sp, #-16]!
10: stp x21, x22, [sp, #-16]!
14: stp x25, x26, [sp, #-16]!
18: mov x25, sp
1c: mov x26, #0x0 // #0
20: bti j
24: sub sp, sp, #0x90
28: add x19, x0, #0x0
2c: mov x0, #0x0 // #0
30: mov x10, #0xffffffffffffff78 // #-136
34: str x0, [x25, x10]
38: mov x10, #0xffffffffffffff80 // #-128
3c: str x0, [x25, x10]
40: mov x10, #0xffffffffffffff88 // #-120
44: str x0, [x25, x10]
48: mov x10, #0xffffffffffffff90 // #-112
4c: str x0, [x25, x10]
50: mov x10, #0xffffffffffffff98 // #-104
54: str x0, [x25, x10]
58: mov x10, #0xffffffffffffffa0 // #-96
5c: str x0, [x25, x10]
60: mov x10, #0xffffffffffffffa8 // #-88
64: str x0, [x25, x10]
68: mov x10, #0xffffffffffffffb0 // #-80
6c: str x0, [x25, x10]
70: mov x10, #0xffffffffffffffb8 // #-72
74: str x0, [x25, x10]
78: mov x10, #0xffffffffffffffc0 // #-64
7c: str x0, [x25, x10]
80: mov x10, #0xffffffffffffffc8 // #-56
84: str x0, [x25, x10]
88: mov x10, #0xffffffffffffffd0 // #-48
8c: str x0, [x25, x10]
90: mov x10, #0xffffffffffffffd8 // #-40
94: str x0, [x25, x10]
98: mov x10, #0xffffffffffffffe0 // #-32
9c: str x0, [x25, x10]
a0: mov x10, #0xffffffffffffffe8 // #-24
a4: str x0, [x25, x10]
a8: mov x10, #0xfffffffffffffff0 // #-16
ac: str x0, [x25, x10]
b0: mov x10, #0xfffffffffffffff8 // #-8
b4: str x0, [x25, x10]
b8: mov x10, #0x8 // #8
bc: ldr x2, [x19, x10]
[...]
With this patch, jited code(fragment):
0: bti c
4: stp x29, x30, [sp, #-16]!
8: mov x29, sp
c: stp x19, x20, [sp, #-16]!
10: stp x21, x22, [sp, #-16]!
14: stp x25, x26, [sp, #-16]!
18: stp x27, x28, [sp, #-16]!
1c: mov x25, sp
20: sub x27, x25, #0x88
24: mov x26, #0x0 // #0
28: bti j
2c: sub sp, sp, #0x90
30: add x19, x0, #0x0
34: mov x0, #0x0 // #0
38: str x0, [x27]
3c: str x0, [x27, #8]
40: str x0, [x27, #16]
44: str x0, [x27, #24]
48: str x0, [x27, #32]
4c: str x0, [x27, #40]
50: str x0, [x27, #48]
54: str x0, [x27, #56]
58: str x0, [x27, #64]
5c: str x0, [x27, #72]
60: str x0, [x27, #80]
64: str x0, [x27, #88]
68: str x0, [x27, #96]
6c: str x0, [x27, #104]
70: str x0, [x27, #112]
74: str x0, [x27, #120]
78: str x0, [x27, #128]
7c: ldr x2, [x19, #8]
[...]
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220321152852.2334294-4-xukuohai@huawei.com
|
||
|
Xu Kuohai
|
7db6c0f1d8 |
bpf, arm64: Optimize BPF store/load using arm64 str/ldr(immediate offset)
The current BPF store/load instruction is translated by the JIT into two instructions. The first instruction moves the immediate offset into a temporary register. The second instruction uses this temporary register to do the real store/load. In fact, arm64 supports addressing with immediate offsets. So This patch introduces optimization that uses arm64 str/ldr instruction with immediate offset when the offset fits. Example of generated instuction for r2 = *(u64 *)(r1 + 0): without optimization: mov x10, 0 ldr x1, [x0, x10] with optimization: ldr x1, [x0, 0] If the offset is negative, or is not aligned correctly, or exceeds max value, rollback to the use of temporary register. Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220321152852.2334294-3-xukuohai@huawei.com |
||
|
Andrey Konovalov
|
36c4a73bf8 |
kasan, arm64: don't tag executable vmalloc allocations
Besides asking vmalloc memory to be executable via the prot argument of __vmalloc_node_range() (see the previous patch), the kernel can skip that bit and instead mark memory as executable via set_memory_x(). Once tag-based KASAN modes start tagging vmalloc allocations, executing code from such allocations will lead to the PC register getting a tag, which is not tolerated by the kernel. Generic kernel code typically allocates memory via module_alloc() if it intends to mark memory as executable. (On arm64 module_alloc() uses __vmalloc_node_range() without setting the executable bit). Thus, reset pointer tags of pointers returned from module_alloc(). However, on arm64 there's an exception: the eBPF subsystem. Instead of using module_alloc(), it uses vmalloc() (via bpf_jit_alloc_exec()) to allocate its JIT region. Thus, reset pointer tags of pointers returned from bpf_jit_alloc_exec(). Resetting tags for these pointers results in untagged pointers being passed to set_memory_x(). This causes conflicts in arithmetic checks in change_memory_common(), as vm_struct->addr pointer returned by find_vm_area() is tagged. Reset pointer tag of find_vm_area(addr)->addr in change_memory_common(). Link: https://lkml.kernel.org/r/b7b2595423340cd7d76b770e5d519acf3b72f0ab.1643047180.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Hou Tao
|
1902472b4f |
bpf, arm64: Support more atomic operations
Atomics for eBPF patch series adds support for atomic[64]_fetch_add,
atomic[64]_[fetch_]{and,or,xor} and atomic[64]_{xchg|cmpxchg}, but it
only adds support for x86-64, so support these atomic operations for
arm64 as well.
Basically the implementation procedure is almost mechanical translation
of code snippets in atomic_ll_sc.h & atomic_lse.h & cmpxchg.h located
under arch/arm64/include/asm.
When LSE atomic is unavailable, an extra temporary register is needed for
(BPF_ADD | BPF_FETCH) to save the value of src register, instead of adding
TMP_REG_4 just use BPF_REG_AX instead. Also make emit_lse_atomic() as an
empty inline function when CONFIG_ARM64_LSE_ATOMICS is disabled.
For cpus_have_cap(ARM64_HAS_LSE_ATOMICS) case and no-LSE-ATOMICS case, the
following three tests: "./test_verifier", "./test_progs -t atomic" and
"insmod ./test_bpf.ko" are exercised and passed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220217072232.1186625-4-houtao1@huawei.com
|
||
|
Hou Tao
|
dda7596c10 |
bpf, arm64: Feed byte-offset into bpf line info
insn_to_jit_off passed to bpf_prog_fill_jited_linfo() is calculated in
instruction granularity instead of bytes granularity, but BPF line info
requires byte offset.
bpf_prog_fill_jited_linfo() will be the last user of ctx.offset before
it is freed, so convert the offset into byte-offset before calling into
bpf_prog_fill_jited_linfo() in order to fix the line info dump on arm64.
Fixes:
|
||
|
Hou Tao
|
68e4f238b0 |
bpf, arm64: Call build_prologue() first in first JIT pass
BPF line info needs ctx->offset to be the instruction offset in the whole JITed
image instead of the body itself, so also call build_prologue() first in first
JIT pass.
Fixes:
|
||
|
Hou Tao
|
b5e975d256 |
bpf, arm64: Enable kfunc call
Since commit
|
||
|
Hou Tao
|
e4a41c2c1f |
bpf, arm64: Use emit_addr_mov_i64() for BPF_PSEUDO_FUNC
The following error is reported when running "./test_progs -t for_each"
under arm64:
bpf_jit: multi-func JIT bug 58 != 56
[...]
JIT doesn't support bpf-to-bpf calls
The root cause is the size of BPF_PSEUDO_FUNC instruction increases
from 2 to 3 after the address of called bpf-function is settled and
there are two bpf-to-bpf calls in test_pkt_access. The generated
instructions are shown below:
0x48: 21 00 C0 D2 movz x1, #0x1, lsl #32
0x4c: 21 00 80 F2 movk x1, #0x1
0x48: E1 3F C0 92 movn x1, #0x1ff, lsl #32
0x4c: 41 FE A2 F2 movk x1, #0x17f2, lsl #16
0x50: 81 70 9F F2 movk x1, #0xfb84
Fixing it by using emit_addr_mov_i64() for BPF_PSEUDO_FUNC, so
the size of jited image will not change.
Fixes:
|
||
|
Christoph Hellwig
|
06edc59c1f |
bpf, docs: Prune all references to "internal BPF"
The eBPF name has completely taken over from eBPF in general usage for the actual eBPF representation, or BPF for any general in-kernel use. Prune all remaining references to "internal BPF". Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20211119163215.971383-4-hch@lst.de |
||
|
Tiezhu Yang
|
ebf7f6f0a6 |
bpf: Change value of MAX_TAIL_CALL_CNT from 32 to 33
In the current code, the actual max tail call count is 33 which is greater than MAX_TAIL_CALL_CNT (defined as 32). The actual limit is not consistent with the meaning of MAX_TAIL_CALL_CNT and thus confusing at first glance. We can see the historical evolution from commit |
||
|
Russell King
|
b89ddf4cca |
arm64/bpf: Remove 128MB limit for BPF JIT programs
Commit |
||
|
Linus Torvalds
|
46f8763228 |
arm64 updates for 5.16
- Support for the Arm8.6 timer extensions, including a self-synchronising
view of the system registers to elide some expensive ISB instructions.
- Exception table cleanup and rework so that the fixup handlers appear
correctly in backtraces.
- A handful of miscellaneous changes, the main one being selection of
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK.
- More mm and pgtable cleanups.
- KASAN support for "asymmetric" MTE, where tag faults are reported
synchronously for loads (via an exception) and asynchronously for
stores (via a register).
- Support for leaving the MMU enabled during kexec relocation, which
significantly speeds up the operation.
- Minor improvements to our perf PMU drivers.
- Improvements to the compat vDSO build system, particularly when
building with LLVM=1.
- Preparatory work for handling some Coresight TRBE tracing errata.
- Cleanup and refactoring of the SVE code to pave the way for SME
support in future.
- Ensure SCS pages are unpoisoned immediately prior to freeing them
when KASAN is enabled for the vmalloc area.
- Try moving to the generic pfn_valid() implementation again now that
the DMA mapping issue from last time has been resolved.
- Numerous improvements and additions to our FPSIMD and SVE selftests.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmF74ZYQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNI/eB/UZYAtmNi6xC5StPaETyMLeZph9BV/IqIFq
N71ds7MFzlX/agR6MwLbH2tBHezBtlQ90O732Jjz8zAec2cHd+7sx/w82JesX7PB
IuOfqP78rvtU4ZkKe1Rcd96QtYvbtNAqcRhIo95OzfV9xwuzkvdXI+ZTYhtCfCuZ
GozCqQoJtnNDayMtfzbDSXyJLNJc/qnIcUQhrt3vg12zbF3BcHxnmp0nBcHCqZEo
lDJYufju7p87kCzaFYda2WhlI3t+NThqKOiZ332wQfqzNcr+rw1Y4jWbnCfrdLtI
JfHT9yiuHDmFSYaJrk7NU8kftW31NV70bbhD7rZ+DQCVndl0lRc=
=3R3j
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's the usual summary below, but the highlights are support for
the Armv8.6 timer extensions, KASAN support for asymmetric MTE, the
ability to kexec() with the MMU enabled and a second attempt at
switching to the generic pfn_valid() implementation.
Summary:
- Support for the Arm8.6 timer extensions, including a
self-synchronising view of the system registers to elide some
expensive ISB instructions.
- Exception table cleanup and rework so that the fixup handlers
appear correctly in backtraces.
- A handful of miscellaneous changes, the main one being selection of
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK.
- More mm and pgtable cleanups.
- KASAN support for "asymmetric" MTE, where tag faults are reported
synchronously for loads (via an exception) and asynchronously for
stores (via a register).
- Support for leaving the MMU enabled during kexec relocation, which
significantly speeds up the operation.
- Minor improvements to our perf PMU drivers.
- Improvements to the compat vDSO build system, particularly when
building with LLVM=1.
- Preparatory work for handling some Coresight TRBE tracing errata.
- Cleanup and refactoring of the SVE code to pave the way for SME
support in future.
- Ensure SCS pages are unpoisoned immediately prior to freeing them
when KASAN is enabled for the vmalloc area.
- Try moving to the generic pfn_valid() implementation again now that
the DMA mapping issue from last time has been resolved.
- Numerous improvements and additions to our FPSIMD and SVE
selftests"
[ armv8.6 timer updates were in a shared branch and already came in
through -tip in the timer pull - Linus ]
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
arm64: Select POSIX_CPU_TIMERS_TASK_WORK
arm64: Document boot requirements for FEAT_SME_FA64
arm64/sve: Fix warnings when SVE is disabled
arm64/sve: Add stub for sve_max_virtualisable_vl()
arm64: errata: Add detection for TRBE write to out-of-range
arm64: errata: Add workaround for TSB flush failures
arm64: errata: Add detection for TRBE overwrite in FILL mode
arm64: Add Neoverse-N2, Cortex-A710 CPU part definition
selftests: arm64: Factor out utility functions for assembly FP tests
arm64: vmlinux.lds.S: remove `.fixup` section
arm64: extable: add load_unaligned_zeropad() handler
arm64: extable: add a dedicated uaccess handler
arm64: extable: add `type` and `data` fields
arm64: extable: use `ex` for `exception_table_entry`
arm64: extable: make fixup_exception() return bool
arm64: extable: consolidate definitions
arm64: gpr-num: support W registers
arm64: factor out GPR numbering helpers
arm64: kvm: use kvm_exception_table_entry
arm64: lib: __arch_copy_to_user(): fold fixups into body
...
|
||
|
Lorenz Bauer
|
5d63ae9082 |
bpf: Define bpf_jit_alloc_exec_limit for arm64 JIT
Expose the maximum amount of useable memory from the arm64 JIT. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211014142554.53120-3-lmb@cloudflare.com |
||
|
Mark Rutland
|
d6e2cc5647 |
arm64: extable: add type and data fields
Subsequent patches will add specialized handlers for fixups, in addition
to the simple PC fixup and BPF handlers we have today. In preparation,
this patch adds a new `type` field to struct exception_table_entry, and
uses this to distinguish the fixup and BPF cases. A `data` field is also
added so that subsequent patches can associate data specific to each
exception site (e.g. register numbers).
Handlers are named ex_handler_*() for consistency, following the exmaple
of x86. At the same time, get_ex_fixup() is split out into a helper so
that it can be used by other ex_handler_*() functions ins subsequent
patches.
This patch will increase the size of the exception tables, which will be
remedied by subsequent patches removing redundant fixup code. There
should be no functional change as a result of this patch.
Since each entry is now 12 bytes in size, we must reduce the alignment
of each entry from `.align 3` (i.e. 8 bytes) to `.align 2` (i.e. 4
bytes), which is the natrual alignment of the `insn` and `fixup` fields.
The current 8-byte alignment is a holdover from when the `insn` and
`fixup` fields was 8 bytes, and while not harmful has not been necessary
since commit:
|
||
|
Mark Rutland
|
e8c328d7de |
arm64: extable: make fixup_exception() return bool
The return values of fixup_exception() and arm64_bpf_fixup_exception() represent a boolean condition rather than an error code, so for clarity it would be better to return `bool` rather than `int`. This patch adjusts the code accordingly. While we're modifying the prototype, we also remove the unnecessary `extern` keyword, so that this won't look out of place when we make subsequent additions to the header. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: James Morse <james.morse@arm.com> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20211019160219.5202-9-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Daniel Borkmann
|
f5e81d1117 |
bpf: Introduce BPF nospec instruction for mitigating Spectre v4
In case of JITs, each of the JIT backends compiles the BPF nospec instruction /either/ to a machine instruction which emits a speculation barrier /or/ to /no/ machine instruction in case the underlying architecture is not affected by Speculative Store Bypass or has different mitigations in place already. This covers both x86 and (implicitly) arm64: In case of x86, we use 'lfence' instruction for mitigation. In case of arm64, we rely on the firmware mitigation as controlled via the ssbd kernel parameter. Whenever the mitigation is enabled, it works for all of the kernel code with no need to provide any additional instructions here (hence only comment in arm64 JIT). Other archs can follow as needed. The BPF nospec instruction is specifically targeting Spectre v4 since i) we don't use a serialization barrier for the Spectre v1 case, and ii) mitigation instructions for v1 and v4 might be different on some archs. The BPF nospec is required for a future commit, where the BPF verifier does annotate intermediate BPF programs with speculation barriers. Co-developed-by: Piotr Krysiuk <piotras@gmail.com> Co-developed-by: Benedict Schlueter <benedict.schlueter@rub.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Piotr Krysiuk <piotras@gmail.com> Signed-off-by: Benedict Schlueter <benedict.schlueter@rub.de> Acked-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
dbe69e4337 |
Networking changes for 5.14.
Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener
to another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance
(for pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require
jump labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast address
allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks
in NAPI context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP
(our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm 60GHz WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LvtX
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
|
||
|
Mark Rutland
|
3e00e39d9d |
arm64: insn: move AARCH64_INSN_SIZE into <asm/insn.h>
For histroical reasons, we define AARCH64_INSN_SIZE in <asm/alternative-macros.h>, but it would make more sense to do so in <asm/insn.h>. Let's move it into <asm/insn.h>, and add the necessary include directives for this. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210609102301.17332-3-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Tiezhu Yang
|
119220d812 |
bpf, arm64: Remove redundant switch case about BPF_DIV and BPF_MOD
After commit
|
||
|
Tiezhu Yang
|
3f2870989f |
bpf, arm64: Replace STACK_ALIGN() with round_up() to align stack size
Use the common function round_up() directly to show the align size explicitly, the function STACK_ALIGN() is needless, remove it. Other JITs also just rely on round_up(). Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/1620651119-5663-1-git-send-email-yangtiezhu@loongson.cn |
||
|
Brendan Jackman
|
91c960b005 |
bpf: Rename BPF_XADD and prepare to encode other atomics in .imm
A subsequent patch will add additional atomic operations. These new operations will use the same opcode field as the existing XADD, with the immediate discriminating different operations. In preparation, rename the instruction mode BPF_ATOMIC and start calling the zero immediate BPF_ADD. This is possible (doesn't break existing valid BPF progs) because the immediate field is currently reserved MBZ and BPF_ADD is zero. All uses are removed from the tree but the BPF_XADD definition is kept around to avoid breaking builds for people including kernel headers. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Björn Töpel <bjorn.topel@gmail.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com |
||
|
Ilias Apalodimas
|
32f6865c7a |
arm64: bpf: Fix branch offset in JIT
Running the eBPF test_verifier leads to random errors looking like this: [ 6525.735488] Unexpected kernel BRK exception at EL1 [ 6525.735502] Internal error: ptrace BRK handler: f2000100 [#1] SMP [ 6525.741609] Modules linked in: nls_utf8 cifs libdes libarc4 dns_resolver fscache binfmt_misc nls_ascii nls_cp437 vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul efi_pstore sha2_ce sha256_arm64 sha1_ce evdev efivars efivarfs ip_tables x_tables autofs4 btrfs blake2b_generic xor xor_neon zstd_compress raid6_pq libcrc32c crc32c_generic ahci xhci_pci libahci xhci_hcd igb libata i2c_algo_bit nvme realtek usbcore nvme_core scsi_mod t10_pi netsec mdio_devres of_mdio gpio_keys fixed_phy libphy gpio_mb86s7x [ 6525.787760] CPU: 3 PID: 7881 Comm: test_verifier Tainted: G W 5.9.0-rc1+ #47 [ 6525.796111] Hardware name: Socionext SynQuacer E-series DeveloperBox, BIOS build #1 Jun 6 2020 [ 6525.804812] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--) [ 6525.810390] pc : bpf_prog_c3d01833289b6311_F+0xc8/0x9f4 [ 6525.815613] lr : bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c [ 6525.820832] sp : ffff8000130cbb80 [ 6525.824141] x29: ffff8000130cbbb0 x28: 0000000000000000 [ 6525.829451] x27: 000005ef6fcbf39b x26: 0000000000000000 [ 6525.834759] x25: ffff8000130cbb80 x24: ffff800011dc7038 [ 6525.840067] x23: ffff8000130cbd00 x22: ffff0008f624d080 [ 6525.845375] x21: 0000000000000001 x20: ffff800011dc7000 [ 6525.850682] x19: 0000000000000000 x18: 0000000000000000 [ 6525.855990] x17: 0000000000000000 x16: 0000000000000000 [ 6525.861298] x15: 0000000000000000 x14: 0000000000000000 [ 6525.866606] x13: 0000000000000000 x12: 0000000000000000 [ 6525.871913] x11: 0000000000000001 x10: ffff8000000a660c [ 6525.877220] x9 : ffff800010951810 x8 : ffff8000130cbc38 [ 6525.882528] x7 : 0000000000000000 x6 : 0000009864cfa881 [ 6525.887836] x5 : 00ffffffffffffff x4 : 002880ba1a0b3e9f [ 6525.893144] x3 : 0000000000000018 x2 : ffff8000000a4374 [ 6525.898452] x1 : 000000000000000a x0 : 0000000000000009 [ 6525.903760] Call trace: [ 6525.906202] bpf_prog_c3d01833289b6311_F+0xc8/0x9f4 [ 6525.911076] bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c [ 6525.915957] bpf_dispatcher_xdp_func+0x14/0x20 [ 6525.920398] bpf_test_run+0x70/0x1b0 [ 6525.923969] bpf_prog_test_run_xdp+0xec/0x190 [ 6525.928326] __do_sys_bpf+0xc88/0x1b28 [ 6525.932072] __arm64_sys_bpf+0x24/0x30 [ 6525.935820] el0_svc_common.constprop.0+0x70/0x168 [ 6525.940607] do_el0_svc+0x28/0x88 [ 6525.943920] el0_sync_handler+0x88/0x190 [ 6525.947838] el0_sync+0x140/0x180 [ 6525.951154] Code: d4202000 d4202000 d4202000 d4202000 (d4202000) [ 6525.957249] ---[ end trace cecc3f93b14927e2 ]--- The reason is the offset[] creation and later usage, while building the eBPF body. The code currently omits the first instruction, since build_insn() will increase our ctx->idx before saving it. That was fine up until bounded eBPF loops were introduced. After that introduction, offset[0] must be the offset of the end of prologue which is the start of the 1st insn while, offset[n] holds the offset of the end of n-th insn. When "taken loop with back jump to 1st insn" test runs, it will eventually call bpf2a64_offset(-1, 2, ctx). Since negative indexing is permitted, the current outcome depends on the value stored in ctx->offset[-1], which has nothing to do with our array. If the value happens to be 0 the tests will work. If not this error triggers. commit |
||
|
Jean-Philippe Brucker
|
8008342853 |
bpf, arm64: Add BPF exception tables
When a tracing BPF program attempts to read memory without using the bpf_probe_read() helper, the verifier marks the load instruction with the BPF_PROBE_MEM flag. Since the arm64 JIT does not currently recognize this flag it falls back to the interpreter. Add support for BPF_PROBE_MEM, by appending an exception table to the BPF program. If the load instruction causes a data abort, the fixup infrastructure finds the exception table and fixes up the fault, by clearing the destination register and jumping over the faulting instruction. To keep the compact exception table entry format, inspect the pc in fixup_exception(). A more generic solution would add a "handler" field to the table entry, like on x86 and s390. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200728152122.1292756-2-jean-philippe@linaro.org |
||
|
Will Deacon
|
d27865279f |
Merge branch 'for-next/bti' into for-next/core
Support for Branch Target Identification (BTI) in user and kernel (Mark Brown and others) * for-next/bti: (39 commits) arm64: vdso: Fix CFI directives in sigreturn trampoline arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction arm64: bti: Fix support for userspace only BTI arm64: kconfig: Update and comment GCC version check for kernel BTI arm64: vdso: Map the vDSO text with guarded pages when built for BTI arm64: vdso: Force the vDSO to be linked as BTI when built for BTI arm64: vdso: Annotate for BTI arm64: asm: Provide a mechanism for generating ELF note for BTI arm64: bti: Provide Kconfig for kernel mode BTI arm64: mm: Mark executable text as guarded pages arm64: bpf: Annotate JITed code for BTI arm64: Set GP bit in kernel page tables to enable BTI for the kernel arm64: asm: Override SYM_FUNC_START when building the kernel with BTI arm64: bti: Support building kernel C code using BTI arm64: Document why we enable PAC support for leaf functions arm64: insn: Report PAC and BTI instructions as skippable arm64: insn: Don't assume unrecognized HINTs are skippable arm64: insn: Provide a better name for aarch64_insn_is_nop() arm64: insn: Add constants for new HINT instruction decode arm64: Disable old style assembly annotations ... |
||
|
Luke Nelson
|
fd868f1481 |
bpf, arm64: Optimize ADD,SUB,JMP BPF_K using arm64 add/sub immediates
The current code for BPF_{ADD,SUB} BPF_K loads the BPF immediate to a
temporary register before performing the addition/subtraction. Similarly,
BPF_JMP BPF_K cases load the immediate to a temporary register before
comparison.
This patch introduces optimizations that use arm64 immediate add, sub,
cmn, or cmp instructions when the BPF immediate fits. If the immediate
does not fit, it falls back to using a temporary register.
Example of generated code for BPF_ALU64_IMM(BPF_ADD, R0, 2):
without optimization:
24: mov x10, #0x2
28: add x7, x7, x10
with optimization:
24: add x7, x7, #0x2
The code could use A64_{ADD,SUB}_I directly and check if it returns
AARCH64_BREAK_FAULT, similar to how logical immediates are handled.
However, aarch64_insn_gen_add_sub_imm from insn.c prints error messages
when the immediate does not fit, and it's simpler to check if the
immediate fits ahead of time.
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20200508181547.24783-4-luke.r.nels@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
||
|
Luke Nelson
|
fd49591cb4 |
bpf, arm64: Optimize AND,OR,XOR,JSET BPF_K using arm64 logical immediates
The current code for BPF_{AND,OR,XOR,JSET} BPF_K loads the immediate to
a temporary register before use.
This patch changes the code to avoid using a temporary register
when the BPF immediate is encodable using an arm64 logical immediate
instruction. If the encoding fails (due to the immediate not being
encodable), it falls back to using a temporary register.
Example of generated code for BPF_ALU32_IMM(BPF_AND, R0, 0x80000001):
without optimization:
24: mov w10, #0x8000ffff
28: movk w10, #0x1
2c: and w7, w7, w10
with optimization:
24: and w7, w7, #0x80000001
Since the encoding process is quite complex, the JIT reuses existing
functionality in arch/arm64/kernel/insn.c for encoding logical immediates
rather than duplicate it in the JIT.
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20200508181547.24783-3-luke.r.nels@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
||
|
Mark Brown
|
fa76cfe65c |
arm64: bpf: Annotate JITed code for BTI
In order to extend the protection offered by BTI to all code executing in kernel mode we need to annotate JITed BPF code appropriately for BTI. To do this we need to add a landing pad to the start of each BPF function and also immediately after the function prologue if we are emitting a function which can be tail called. Jumps within BPF functions are all to immediate offsets and therefore do not require landing pads. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20200506195138.22086-6-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Jerin Jacob
|
504792e07a |
arm64: bpf: optimize modulo operation
Optimize modulo operation instruction generation by using single MSUB instruction vs MUL followed by SUB instruction scheme. Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
|
Linus Torvalds
|
dfd437a257 |
arm64 updates for 5.3:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG
and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags'
introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
-----BEGIN PGP SIGNATURE-----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=0TDT
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
XAFLAG and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
'arm_boot_flags' introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
perf: arm_spe: Enable ACPI/Platform automatic module loading
arm_pmu: acpi: spe: Add initial MADT/SPE probing
ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
ACPI/PPTT: Modify node flag detection to find last IDENTICAL
x86/entry: Simplify _TIF_SYSCALL_EMU handling
arm64: rename dump_instr as dump_kernel_instr
arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
arm64: Implement panic_smp_self_stop()
arm64: Improve parking of stopped CPUs
arm64: Expose FRINT capabilities to userspace
arm64: Expose ARMv8.5 CondM capability to userspace
arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
arm64: ARM64_MODULES_PLTS must depend on MODULES
arm64: bpf: do not allocate executable memory
arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
arm64: module: create module allocations without exec permissions
arm64: Allow user selection of ARM64_MODULE_PLTS
acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
arm64: Allow selecting Pseudo-NMI again
...
|
||
|
Ard Biesheuvel
|
3f75070648 |
arm64: bpf: do not allocate executable memory
The BPF code now takes care of mapping the code pages executable after mapping them read-only, to ensure that no RWX mapped regions are needed, even transiently. This means we can drop the executable permissions from the mapping at allocation time. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Thomas Gleixner
|
caab277b1d |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Daniel Borkmann
|
34b8ab091f |
bpf, arm64: use more scalable stadd over ldxr / stxr loop in xadd
Since ARMv8.1 supplement introduced LSE atomic instructions back in 2016, lets add support for STADD and use that in favor of LDXR / STXR loop for the XADD mapping if available. STADD is encoded as an alias for LDADD with XZR as the destination register, therefore add LDADD to the instruction encoder along with STADD as special case and use it in the JIT for CPUs that advertise LSE atomics in CPUID register. If immediate offset in the BPF XADD insn is 0, then use dst register directly instead of temporary one. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Daniel Borkmann
|
8968c67a82 |
bpf, arm64: remove prefetch insn in xadd mapping
Prefetch-with-intent-to-write is currently part of the XADD mapping in
the AArch64 JIT and follows the kernel's implementation of atomic_add.
This may interfere with other threads executing the LDXR/STXR loop,
leading to potential starvation and fairness issues. Drop the optional
prefetch instruction.
Fixes:
|
||
|
Jiong Wang
|
654b65a048 |
arm64: bpf: implement jitting of JMP32
This patch implements code-gen for new JMP32 instructions on arm64. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Martin KaFai Lau
|
37ab566c17 |
bpf: arm64: Enable arm64 jit to provide bpf_line_info
This patch enables arm64's bpf_int_jit_compile() to provide bpf_line_info by calling bpf_prog_fill_jited_linfo(). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
|
Ard Biesheuvel
|
91fc957c9b |
arm64/bpf: don't allocate BPF JIT programs in module memory
The arm64 module region is a 128 MB region that is kept close to the core kernel, in order to ensure that relative branches are always in range. So using the same region for programs that do not have this restriction is wasteful, and preferably avoided. Now that the core BPF JIT code permits the alloc/free routines to be overridden, implement them by vmalloc()/vfree() calls from a dedicated 128 MB region set aside for BPF programs. This ensures that BPF programs are still in branching range of each other, which is something the JIT currently depends upon (and is not guaranteed when using module_alloc() on KASLR kernels like we do currently). It also ensures that placement of BPF programs does not correlate with the placement of the core kernel or modules, making it less likely that leaking the former will reveal the latter. This also solves an issue under KASAN, where shadow memory is needlessly allocated for all BPF programs (which don't require KASAN shadow pages since they are not KASAN instrumented) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
|
Ard Biesheuvel
|
cc2b8ed136 |
arm64/bpf: use movn/movk/movk sequence to generate kernel addresses
On arm64, all executable code is guaranteed to reside in the vmalloc space (or the module space), and so jump targets will only use 48 bits at most, and the remaining bits are guaranteed to be 0x1. This means we can generate an immediate jump address using a sequence of one MOVN (move wide negated) and two MOVK instructions, where the first one sets the lower 16 bits but also sets all top bits to 0x1. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
|
Daniel Borkmann
|
8c11ea5ce1 |
bpf, arm64: fix getting subprog addr from aux for calls
The arm64 JIT has the same issue as ppc64 JIT in that the relative BPF to BPF call offset can be too far away from core kernel in that relative encoding into imm is not sufficient and could potentially be truncated, see also |
||
|
Daniel Borkmann
|
56ea6a8b49 |
bpf, arm64: save 4 bytes in prologue when ebpf insns came from cbpf
We can trivially save 4 bytes in prologue for cBPF since tail calls can never be used from there. The register push/pop is pairwise, here, x25 (fp) and x26 (tcc), so no point in changing that, only reset to zero is not needed. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Daniel Borkmann
|
6d2eea6fb0 |
bpf, arm64: optimize 32/64 immediate emission
Improve the JIT to emit 64 and 32 bit immediates, the current
algorithm is not optimal and we often emit more instructions
than actually needed. arm64 has movz, movn, movk variants but
for the current 64 bit immediates we only use movz with a
series of movk when needed.
For example loading ffffffffffffabab emits the following 4
instructions in the JIT today:
* movz: abab, shift: 0, result: 000000000000abab
* movk: ffff, shift: 16, result: 00000000ffffabab
* movk: ffff, shift: 32, result: 0000ffffffffabab
* movk: ffff, shift: 48, result: ffffffffffffabab
Whereas after the patch the same load only needs a single
instruction:
* movn: 5454, shift: 0, result: ffffffffffffabab
Another example where two extra instructions can be saved:
* movz: abab, shift: 0, result: 000000000000abab
* movk: 1f2f, shift: 16, result: 000000001f2fabab
* movk: ffff, shift: 32, result: 0000ffff1f2fabab
* movk: ffff, shift: 48, result: ffffffff1f2fabab
After the patch:
* movn: e0d0, shift: 16, result: ffffffff1f2fffff
* movk: abab, shift: 0, result: ffffffff1f2fabab
Another example with movz, before:
* movz: 0000, shift: 0, result: 0000000000000000
* movk: fea0, shift: 32, result: 0000fea000000000
After:
* movz: fea0, shift: 32, result: 0000fea000000000
Moreover, reuse emit_a64_mov_i() for 32 bit immediates that
are loaded via emit_a64_mov_i64() which is a similar optimization
as done in
|
||
|
Daniel Borkmann
|
09ece3d0f2 |
bpf, arm64: save 4 bytes of unneeded stack space
Follow-up to
|