In the i.MX6QP sabresd board(sch-28857) design, one external oscillator
is powered up by vgen3 and used as the PCIe reference clock source by
the endpoint device.
If RC uses this oscillator as reference clock too, PLL6(ENET PLL) would
has to be in bypass mode, and ENET clocks would be messed up.
To keep things simple, let RC use the internal PLL as reference clock
and set vgen3 always on to enable the external oscillator for endpoint
device on i.MX6QP sabresd board.
NOTE: This reference clock setup is used to pass the GEN2 TX compliance
tests, and isn't recommended as a setup in the end-user design.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On imx6qp-sabresd LDO_ARM is connected to a different PMIC output than
the other imx6qdl-sabresd boards.
Setting cpu0 arm-supply to sw2_reg is wrong, this must have mistakenly
slipped out of the vendor tree where this is are used for LDO bypass.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
