set number of sample averaging to 128 for both PWR_AVG and VI_AVG
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220418094827.6185-1-potin.lai@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add eeprom (24c26) on each sled for storing sled fru information.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-7-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add an ioexp node on each sled baseed on DVT schematic, address at 0x41.
P0: SLEDX_SWD_MUX
P1: SLEDX_XRES_SWD_N
P2: SLEDX_CLKREQ_N
P3: SLEDX_PCIE_PWR_EN
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-6-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Update GPIO line names based on DVT schematic
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-5-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable mdio0 bus based on DVT schematic.
TODO: Add Marvell 88E6191 Switch
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-4-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Due to DVT schematic has stable spi signal, switch back to aspeed-smc
driver for improving performance.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-3-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable ehci0 node for USB2 host feature
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-2-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Cleanup following nodes:
1. Remove redundant i2c1 node.
2. Disable in-chip rtc, use battery-backed external rtc (pcf85263)
instead.
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220215163151.32252-11-potin.lai@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable mdio3 bus based on EVT HW.
So far lack of c45 support in mdio-aspeed, at least can access mdio bus
by read/write register.
TODO: Add Marvell PHY 88X3310 and mdio-aspeed driver c45 support
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220215163151.32252-10-potin.lai@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add INA230 node on each sled based on EVT HW.
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220215163151.32252-9-potin.lai@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Fix with correct shunt-resistor value base on EVT HW.
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220215163151.32252-8-potin.lai@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable interrupt support for all sledx_ioexp, so userspace can monitor
gpio from io expander by interrupt.
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220215163151.32252-7-potin.lai@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Switch spi2 to spi-gpio driver to avoid unstable signal issue with EVT
HW.
Remove spi2 node and create a new spi2_gpio node.
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220215163151.32252-6-potin.lai@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add flash1 in fmc to support dual flash module.
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220215163151.32252-5-potin.lai@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Separate gpio-leds by each io expander chip.
To avoid entire gpio-leds bind failed due to single chip not available
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220215163151.32252-3-potin.lai@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Switch sled to 1-based to meet OpenBMC multi-host numbering rule
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220215163151.32252-2-potin.lai@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
